| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
SM8450
Narrow number of interrupts per variants: SC8280XP, SM6350 and SM8450.
The compatibles are already used and described. They only missed the
constraints of number of interrupts.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
This file does not use rcu, so there is no point in including
<linux/rculist.h>.
Remove it.
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
Link: https://lore.kernel.org/r/9adeec47cb5a8193016272d5c8bf936235c1711d.1669459337.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Expose thermal sensors as HWMON devices.
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Drivers should not be logging errors on probe deferral. Switch to using
dev_err_probe() to log failures when parsing the devicetree to avoid
errors like:
qcom-spmi-adc-tm5 c440000.spmi:pmic@0:adc-tm@3400: get dt data failed: -517
when a channel is not yet available.
Signed-off-by: Johan Hovold <[email protected]>
Reviewed-by: Manivannan Sadhasivam <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Document compatible string 'mediatek,mt7986-thermal' for V3 thermal
unit found in MT7986 SoCs.
'mediatek,mt7981-thermal' is also added as it is identical with the
thermal unit of MT7986.
Signed-off-by: Daniel Golle <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
It does not make sense to have a comma after a sentinel, as any new
elements must be added before the sentinel.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Keerthy <[email protected]>
Link: https://lore.kernel.org/r/1d6de2a80b919cb11199e56ac06ad21c273ebe57.1669045586.git.geert+renesas@glider.be
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The TMU TASR, TCALIVn, TRIM registers must be explicitly programmed with
calibration values in OCOTP. Add support for reading the OCOTP calibration
data and programming those into the TMU hardware.
The MX8MM/MX8MN TMUv1 uses only one OCOTP cell, while MX8MP TMUv2 uses 4,
the programming differs in each case.
Based on U-Boot commits:
70487ff386c ("imx8mm: Load fuse for TMU TCALIV and TASR")
ebb9aab318b ("imx: load calibration parameters from fuse for i.MX8MP")
Reviewed-by: Peng Fan <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The TMU TASR, TCALIVn, TRIM registers must be explicitly programmed with
calibration values from OCOTP. Document optional phandle to OCOTP nvmem
provider.
Acked-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Marek Vasut <[email protected]>
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The current tsens debugfs structure is composed by:
- a tsens dir in debugfs with a version file
- a directory for each tsens istance with sensors file to dump all the
sensors value.
This works on the assumption that we have the same version for each
istance but this assumption seems fragile and with more than one tsens
istance results in the version file not tracking each of them.
A better approach is to just create a subdirectory for each tsens
istance and put there version and sensors debugfs file.
Using this new implementation results in less code since debugfs entry
are created only on successful tsens probe.
Signed-off-by: Christian Marangi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
For VER_0 the version was incorrectly reported as 0.1.0.
Fix that and correctly report the major version for this old tsens
revision.
Signed-off-by: Christian Marangi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Calibrate and tsens_register can fail or PROBE_DEFER. This will cause a
double or a wrong init of the debugfs information. Init debugfs only
with successful probe fixing warning about directory already present.
Signed-off-by: Christian Marangi <[email protected]>
Acked-by: Thara Gopinath <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP
it only has one IRQ, that is used for up/low as well as critical.
It also does not support negative trip temperatures.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
IPQ8074 and IPQ6018 dont support negative trip temperatures and support
up to 204 degrees C as the max trip temperature.
So, instead of always setting the -40 as min and 120 degrees C as max
allow it to be configured as part of the features.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for
signaling both up/low and critical trips.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Qualcomm IPQ8074 has tsens v2.3.0 block, though unlike existing v2 IP it
only uses one IRQ, so tsens v2 compatible cannot be used as the fallback.
We also have to make sure that correct interrupts are set according to
compatibles, so populate interrupt information per compatibles.
Signed-off-by: Robert Marko <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The function does not free 'of_ops' upon failure, leading to a memory
leak [1].
Fix by freeing 'of_ops' in the error path.
[1]
unreferenced object 0xffff8ee846198c80 (size 128):
comm "swapper/0", pid 1, jiffies 4294699704 (age 70.076s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
d0 3f 6e 8c ff ff ff ff 00 00 00 00 00 00 00 00 .?n.............
backtrace:
[<00000000d136f562>] __kmalloc_node_track_caller+0x42/0x120
[<0000000063f31678>] kmemdup+0x1d/0x40
[<00000000e6d24096>] thermal_of_zone_register+0x49/0x520
[<000000005e78c755>] devm_thermal_of_zone_register+0x54/0x90
[<00000000ee6b209e>] pmbus_add_sensor+0x1b4/0x1d0
[<00000000896105e3>] pmbus_add_sensor_attrs_one+0x123/0x440
[<0000000049e990a6>] pmbus_add_sensor_attrs+0xfe/0x1d0
[<00000000466b5440>] pmbus_do_probe+0x66b/0x14e0
[<0000000084d42285>] i2c_device_probe+0x13b/0x2f0
[<0000000029e2ae74>] really_probe+0xce/0x2c0
[<00000000692df15c>] driver_probe_device+0x19/0xd0
[<00000000547d9cce>] __device_attach_driver+0x6f/0x100
[<0000000020abd24b>] bus_for_each_drv+0x76/0xc0
[<00000000665d9563>] __device_attach+0xfc/0x180
[<000000008ddd4d6a>] bus_probe_device+0x82/0xa0
[<000000009e61132b>] device_add+0x3fe/0x920
Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Vadim Pasternak <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
The debug print message to check the workaround applicability is inverted.
Fix the same.
Fixes: ffcb2fc86eb7 ("thermal: k3_j72xx_bandgap: Add the bandgap driver support")
Reported-by: Bryan Brattlof <[email protected]>
Signed-off-by: Keerthy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Convert the 'generic-adc-thermal' binding to DT schema format.
The binding said '#thermal-sensor-cells' should be 1, but all in tree
users are 0 and 1 doesn't make sense for a single channel.
Drop the example's related providers and consumers of the
'generic-adc-thermal' node as the convention is to not have those in
the examples.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Check against the upper temperature limit (125 degrees C) before
consider the temperature valid.
Fixes: 5eed800a6811 ("thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit")
Signed-off-by: Marcus Folkesson <[email protected]>
Reviewed-by: Jacky Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
GENMASK() is preferred to use for bitmasks.
Signed-off-by: Marcus Folkesson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Document the tsens-v2 compatible for sm8450 SoC.
Signed-off-by: Luca Weiss <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Daniel Lezcano <[email protected]>
|
|
Commit c9bfcb315104 ("spi_mpc83xx: much improved driver") made
modifications to the driver to not perform speed changes while
chipselect is active. But those changes where lost with the
convertion to tranfer_one.
Previous implementation was allowing speed changes during
message transfer when cs_change flag was set.
At the time being, core SPI does not provide any feature to change
speed while chipselect is off, so do not allow any speed change during
message transfer, and perform the transfer setup in prepare_message
in order to set correct speed while chipselect is still off.
Reported-by: Herve Codina <[email protected]>
Fixes: 64ca1a034f00 ("spi: fsl_spi: Convert to transfer_one")
Cc: [email protected]
Signed-off-by: Christophe Leroy <[email protected]>
Tested-by: Herve Codina <[email protected]>
Reviewed-by: Herve Codina <[email protected]>
Link: https://lore.kernel.org/r/8aab84c51aa330cf91f4b43782a1c483e150a4e3.1671025244.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <[email protected]>
|
|
Since Python 3.3 extensions have a suffix encoding platform and
version information. For example, the perf extension was previously
perf.so but now maybe perf.cpython-310-x86_64-linux-gnu.so. Compute
the extension using Python and then use this in the target name. Doing
this avoids the "perf.so" target always being rebuilt.
Signed-off-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexey Bayduraev <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Eelco Chaudron <[email protected]>
Cc: German Gomez <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Riccardo Mancini <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Shaomin Deng <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Timothy Hayes <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Ensure that the availability of the VG register behaves as expected
depending on the kernel version and SVE support.
Signed-off-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The first two version numbers are used since that is where the ABI
changes happen, so seems to be the most useful for now.
'Until' is exclusive and 'since' is inclusive so that the same version
number can be used to mark a point where the change comes into effect.
This allows keeping the tests in a state where new tests will also pass
on older kernels if the existence of a new feature isn't explicitly
broadcast by the kernel. For example extended user regs are currently
discovered by trial and error calls to perf_event_open.
Signed-off-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This can be used to skip tests or provide different test values on
different platforms. For example to run a test only where Arm SVE is
present add this to the config section:
auxv = auxv["AT_HWCAP"] & 0x200000 == 0x200000
The value is a freeform Python expression that is evaled in the context
of a map called "auxv" that contains the decoded auxiliary vector.
Signed-off-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently the return value is used to skip the test, but sometimes it
can be useful to test if a certain command should return a certain exit
code.
Signed-off-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Provide task-analyzer test cases for all possible arguments and a subset of possible
combinations.
12 Tests in total.
test_basic:
- cmd:"perf script report task-analyzer"
- Fundamental test of script without arguments.
- Check for standard output.
test_ns_rename:
- cmd:"perf script report task-analyzer --ns --rename-comms-by-tids 0:random"
- Standard task with timestamps in nanoseconds and comm renamed.
- Check for standard output.
test_ms_filtertasks_highlight:
- cmd:"perf script report task-analyzer --ms --filter-tasks perf --highlight-tasks perf"
- Standard task with timestamps in milliseconds, task filtered out and highlighted.
- Check for standard output.
test_extended_times_timelimit_limittasks:
- cmd "perf script report task-analyzer --extended-times --time-limit :99999"
- Standard task with additional schedule out/in info and timlimit active at 99999.
- Check for extended table output.
test_summary:
- cmd:"perf script report task-analyzer --summary"
- Standard task with additional summary output.
- Check for summary print.
test_summary_extended:
- cmd:"perf script report task-analyzer --summary-extended"
- Standard task with summary and additional schedule in/out info.
- Chceck for extended table print.
test_summaryonly:
- cmd:"perf script report task-analyzer --summary-only"
- Only summary should be printed.
- Check for summary print.
test_extended_times_summary_ns:
- cmd:"perf script report task-analyzer --extended-times --summary --ns"
- Standard task with extended schedule in/out information and summary in ns.
- Check for extended table and summary.
test_csv:
- cmd:"perf script report task-analyzer --csv csv"
- Print standard task to csv file in csv format.
- Check for csv format.
test_csv_extended_times:
- cmd:"perf script report task-analyzer --csv csv --extended-times"
- Print standard task to csv file in csv format with additional schedule in/out
information.
- Check for additional information and csv format.
test_csvsummary:
- cmd:"perf script report task-analyzer --csv-summary csvsummary"
- Print summary to csvsummary file in csv format.
- Check for csv format.
test_csvsummary_extended:
- cmd:"perf script report task-analyzer --csv-summary csvsummary --summary-extended"
- Print summary to csvsummary file in csv format with additional schedule in/out
information.
- Check for additional information and csv format.
Suggested-by: Ian Rogers <[email protected]>
Signed-off-by: Petar Gligoric <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hagen Paul Pfeifer <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This patch adds the possibility to write the trace and the summary as csv files
to a user specified file. A format as such simplifies further data processing.
This is achieved by having ";" as separators instead of spaces and solely one
header per file.
Additional parameters are being considered, like in the normal usage of the
script. Colors are turned off in the case of a csv output, thus the highlight
option is also being ignored.
Usage:
Write standard task to csv file:
$ perf script report tasks-analyzer --csv <file>
write limited output to csv file in nanoseconds:
$ perf script report tasks-analyzer --csv <file> --ns --limit-to-tasks 1337
Write summary to a csv file:
$ perf script report tasks-analyzer --csv-summary <file>
Write summary to csv file with additional schedule information:
$ perf script report tasks-analyzer --csv-summary <file> --summary-extended
Write both summary and standard task to a csv file:
$ perf script report tasks-analyzer --csv --csv-summary
The following examples illustrate what is possible with the CSV output. The
first command sequence will record all scheduler switch events for 10 seconds,
the task-analyzer calculates task information like runtimes as CSV. A small
python snippet using pandas and matplotlib will visualize the most frequent
task (e.g. kworker/1:1) runtimes - each runtime as a bar in a bar chart:
$ perf record -e sched:sched_switch -a -- sleep 10
$ perf script report tasks-analyzer --ns --csv tasks.csv
$ cat << EOF > /tmp/freq-comm-runtimes-bar.py
import pandas as pd
import matplotlib.pyplot as plt
df = pd.read_csv("tasks.csv", sep=';')
most_freq_comm = df["COMM"].value_counts().idxmax()
most_freq_runtimes = df[df["COMM"]==most_freq_comm]["Runtime"]
plt.title(f"Runtimes for Task {most_freq_comm} in Nanoseconds")
plt.bar(range(len(most_freq_runtimes)), most_freq_runtimes)
plt.show()
$ python3 /tmp/freq-comm-runtimes-bar.py
As a seconds example, the subsequent script generates a pie chart of all
accumulated tasks runtimes for 10 seconds of system recordings:
$ perf record -e sched:sched_switch -a -- sleep 10
$ perf script report tasks-analyzer --csv-summary task-summary.csv
$ cat << EOF > /tmp/accumulated-task-pie.py
import pandas as pd
from matplotlib.pyplot import pie, axis, show
df = pd.read_csv("task-summary.csv", sep=';')
sums = df.groupby(df["Comm"])["Accumulated"].sum()
axis("equal")
pie(sums, labels=sums.index);
show()
EOF
$ python3 /tmp/accumulated-task-pie.py
A variety of other visualizations are possible in matplotlib and other
environments. Of course, pandas, numpy and co. also allow easy
statistical analysis of the data!
Signed-off-by: Petar Gligoric <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Hagen Paul Pfeifer <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Introduce a new 'perf script' to analyze task scheduling behavior.
During the task analysis, some data is always needed - which goes beyond
the simple time of switching on and off a task (process/thread). This
concerns for example the runtime of a process or the frequency with
which the process was called. This script serves to simplify this
recurring analyze process. It immediately provides the user with helpful
task characteristic information about the tasks runtimes.
Usage:
Recorded can be in two ways:
$ perf script record tasks-analyzer -- sleep 10
$ perf record -e sched:sched_switch -a -- sleep 10
The script can parse all perf.data files, most important: sched:sched_switch
events are mandatory, other events will be ignored.
Most simple report use case is to just call the script without arguments:
$ perf script report tasks-analyzer
Switched-In Switched-Out CPU PID TID Comm Runtime Time Out-In
15576.658891407 15576.659156086 4 2412 2428 gdbus 265 1949
15576.659111320 15576.659455410 0 2412 2412 gnome-shell 344 2267
15576.659491326 15576.659506173 2 74 74 kworker/2:1 15 13145
15576.659506173 15576.659825748 2 2858 2858 gnome-terminal- 320 63263
15576.659871270 15576.659902872 6 20932 20932 kworker/u16:0 32 2314582
15576.659909951 15576.659945501 3 27264 27264 sh 36 -1
15576.659853285 15576.659971052 7 27265 27265 perf 118 5050741
[...]
What is not shown here are the ASCII color sequences. For example, if
the task consists of only one thread, the TID is grayed out.
Runtime is the time the task was running on the CPU, Time Out-In is the
time between the process being scheduled *out* and scheduled back *in*.
So the last time span between two executions. If -1 is printed, then the
task simply ran the first time in the measurements - a Out-In delta
could not be calculated.
In addition to the chronological representation, there is a summary on
task level. This output can be additionally switched on via the
--summary option and provides information such as max, min & average
runtime per process. The maximum runtime is often important for
debugging. The call looks like this:
$ perf script report tasks-analyzer --summary
Summary
Task Information Runtime Information
PID TID Comm Runs Accumulated Mean Median Min Max Max At
14 14 ksoftirqd/0 13 334 26 15 9 127 15571.621211956
15 15 rcu_preempt 133 1778 13 13 2 33 15572.581176024
16 16 migration/0 3 49 16 13 12 24 15571.608915425
20 20 migration/1 3 34 11 13 8 13 15571.639101555
25 25 migration/2 3 32 11 12 9 12 15575.639239896
[...]
Besides these two options, there are a number of other options that change the
output and behavior. This can be queried via --help. Options worth mentioning include:
- filter-tasks - filter out unneeded tasks, --filter-task 1337,/sbin/init
- highlight-tasks - more pleasant focusing, --highlight-tasks 1:red,mutt:yellow
- extended-times - show combinations of elapsed times between schedule in/schedule out
- summary-extended - summary with additional information, like maximum delta time statistics
- rename-comms-by-tids - handy for inexpressive processnames like python, --rename 1337:my-python-app
- ms - show timestamps in milliseconds, nanoseconds is also possible (--ns)
- time-limit - limit the analyzer to a time range, --time-limit 15576.0:15576.1
Script is tested and prime time ready for python2 & python3:
- make PYTHON=python3 prefix=/usr/local install
- make PYTHON=python2 prefix=/usr/local install
Signed-off-by: Hagen Paul Pfeifer <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Petar Gligoric <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Printing the info doesn't have any dependency on OpenCSD, and neither
does recording Coresight data. Because it's sometimes useful to look at
the info for debugging, it makes sense to be able to see it on the same
platform that the recording was made on.
So pull the auxtrace info printing parts into a new file that is always
compiled into Perf.
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
hdr is a copy of 3 values of ptr and doesn't need to be long lived. So
just use ptr instead which means the malloc and the extra error path can
be removed to simplify things.
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
cs_etm__print_auxtrace_info() is called twice in case there is an error
somewhere in cs_etm__process_auxtrace_info(), but all the info is
already available at the beginning so just print it there instead.
Also use u64 and the already cast ptr variable to make it more
consistent with the rest of the etm code.
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
These aren't used outside of cs-etm so don't need stubs. Leave
cs_etm__process_auxtrace_info() which is used externally, and add an
error message so that it's obvious to users why it causes errors.
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
This is an error rather than just for the raw trace dump so always print
it as an error. Also remove the duplicate header version check.
Signed-off-by: James Clark <[email protected]>
Cc: Al Grant <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Add test cases for the task and addr aggregation modes.
$ sudo ./perf test -v contention
86: kernel lock contention analysis test :
--- start ---
test child forked, pid 680006
Testing perf lock record and perf lock contention
Testing perf lock contention --use-bpf
Testing perf lock record and perf lock contention at the same time
Testing perf lock contention --threads
Testing perf lock contention --lock-addr
test child finished with 0
---- end ----
kernel lock contention analysis test: Ok
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Blake Jones <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The -l/--lock-addr option is to implement per-lock-instance contention
stat using LOCK_AGGR_ADDR. It displays lock address and optionally
symbol name if exists.
$ sudo ./perf lock con -abl sleep 1
contended total wait max wait avg wait address symbol
1 36.28 us 36.28 us 36.28 us ffff92615d6448b8
9 10.91 us 1.84 us 1.21 us ffffffffbaed50c0 rcu_state
1 10.49 us 10.49 us 10.49 us ffff9262ac4f0c80
8 4.68 us 1.67 us 585 ns ffffffffbae07a40 jiffies_lock
3 3.03 us 1.45 us 1.01 us ffff9262277861e0
1 924 ns 924 ns 924 ns ffff926095ba9d20
1 436 ns 436 ns 436 ns ffff9260bfda4f60
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Blake Jones <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The BPF didn't show the per-thread stat properly. Use task's thread id (PID)
as a key instead of stack_id and add a task_data map to save task comm names.
$ sudo ./perf lock con -abt -E 5 sleep 1
contended total wait max wait avg wait pid comm
1 740.66 ms 740.66 ms 740.66 ms 1950 nv_queue
3 305.50 ms 298.19 ms 101.83 ms 1884 nvidia-modeset/
1 25.14 us 25.14 us 25.14 us 2725038 EventManager_De
12 23.09 us 9.30 us 1.92 us 0 swapper
1 20.18 us 20.18 us 20.18 us 2725033 EventManager_De
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Blake Jones <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Accessing BPF maps should use the same data types. Add bpf_skel/lock_data.h
to define the common data structures. No functional changes.
Committer notes:
Fixed contention_key.stack_id missing rename to contention_key.stack_or_task_id.
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Blake Jones <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Sometimes build systems may append options e.g. --sysroot etc. to CC
variable especially in cross-compile environments like yocto project
where CC varable is composed of cross-compiler name and some needed
options for it to work in a relocatable environment.
Therefore separate out the compiler name from rest of the options in CC,
then add the options via second argument to Popen() API
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Khem Raj <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Fangrui Song <[email protected]>
Cc: Florian Fainelli <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Keeping <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Sedat Dilek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'btf_trace_sched_switch'
In BTF, tracepoint definitions have the "btf_trace_" prefix. The
off-cpu profiler needs to check the signature of the sched_switch event
using that definition. But there's a typo (s/bpf/btf/) so it failed
always.
Fixes: b36888f71c8542cd ("perf record: Handle argument change in sched_switch")
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: [email protected]
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The event group test checks group creation for combinations of hw, sw
and uncore PMU events. Some of the uncore pmus may require additional
permission to access the counters.
For example, in case of hv_24x7, partition need to have permissions to
access hv_24x7 pmu counters. If not, event_open will fail. Hence add a
sanity check to see if event_open succeeds before proceeding with the
test.
Fixes: 9d9b22bedad13d96 ("perf test: Add event group test for events in multiple PMUs")
Signed-off-by: Athira Jajeev <[email protected]>
Acked-by: Ravi Bangoria <[email protected]>
Cc: Disha Goel <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: [email protected]
Cc: Madhavan Srinivasan <[email protected]>
Cc: Michael Ellerman <[email protected]>
Cc: Nageswara R Sastry <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Ravi Bangoria <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Some distros have older versions of libtraceevent where
TEP_FIELD_IS_RELATIVE and its associated semantics are not present, so
we need to check if the version has it, it was introduced in
libtraceevent 1.5.0.
Reported-by: Athira Jajeev <[email protected]>
Tested-by: Athira Jajeev <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>,
Cc: Stephane Eranian <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
libtraceevent is now out-of-date and it is better to depend on the
system version. Remove this code that is no longer depended upon by
any builds.
Committer notes:
Removed the removed tools/lib/traceevent/ from tools/perf/MANIFEST, so
that 'make perf-tar-src-pkg' works.
Signed-off-by: Ian Rogers <[email protected]>
Acked-by: Steven Rostedt (VMware) <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Masami Hiramatsu <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Remove the LIBTRACEEVENT_DYNAMIC and LIBTRACEFS_DYNAMIC make command
line variables.
If libtraceevent isn't installed or NO_LIBTRACEEVENT=1 is passed to the
build, don't compile in libtraceevent and libtracefs support.
This also disables CONFIG_TRACE that controls "perf trace".
CONFIG_LIBTRACEEVENT is used to control enablement in Build/Makefiles,
HAVE_LIBTRACEEVENT is used in C code.
Without HAVE_LIBTRACEEVENT tracepoints are disabled and as such the
commands kmem, kwork, lock, sched and timechart are removed. The
majority of commands continue to work including "perf test".
Committer notes:
Fixed up a tools/perf/util/Build reject and added:
#include <traceevent/event-parse.h>
to tools/perf/util/scripting-engines/trace-event-perl.c.
Committer testing:
$ rpm -qi libtraceevent-devel
Name : libtraceevent-devel
Version : 1.5.3
Release : 2.fc36
Architecture: x86_64
Install Date: Mon 25 Jul 2022 03:20:19 PM -03
Group : Unspecified
Size : 27728
License : LGPLv2+ and GPLv2+
Signature : RSA/SHA256, Fri 15 Apr 2022 02:11:58 PM -03, Key ID 999f7cbf38ab71f4
Source RPM : libtraceevent-1.5.3-2.fc36.src.rpm
Build Date : Fri 15 Apr 2022 10:57:01 AM -03
Build Host : buildvm-x86-05.iad2.fedoraproject.org
Packager : Fedora Project
Vendor : Fedora Project
URL : https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git/
Bug URL : https://bugz.fedoraproject.org/libtraceevent
Summary : Development headers of libtraceevent
Description :
Development headers of libtraceevent-libs
$
Default build:
$ ldd ~/bin/perf | grep tracee
libtraceevent.so.1 => /lib64/libtraceevent.so.1 (0x00007f1dcaf8f000)
$
# perf trace -e sched:* --max-events 10
0.000 migration/0/17 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, dest_cpu: 1)
0.005 migration/0/17 sched:sched_wake_idle_without_ipi(cpu: 1)
0.011 migration/0/17 sched:sched_switch(prev_comm: "", prev_pid: 17 (migration/0), prev_state: 1, next_comm: "", next_prio: 120)
1.173 :0/0 sched:sched_wakeup(comm: "", pid: 3138 (gnome-terminal-), prio: 120)
1.180 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 3138 (gnome-terminal-), next_prio: 120)
0.156 migration/1/21 sched:sched_migrate_task(comm: "", pid: 1603763 (perf), prio: 120, orig_cpu: 1, dest_cpu: 2)
0.160 migration/1/21 sched:sched_wake_idle_without_ipi(cpu: 2)
0.166 migration/1/21 sched:sched_switch(prev_comm: "", prev_pid: 21 (migration/1), prev_state: 1, next_comm: "", next_prio: 120)
1.183 :0/0 sched:sched_wakeup(comm: "", pid: 1602985 (kworker/u16:0-f), prio: 120, target_cpu: 1)
1.186 :0/0 sched:sched_switch(prev_comm: "", prev_prio: 120, next_comm: "", next_pid: 1602985 (kworker/u16:0-f), next_prio: 120)
#
Had to tweak tools/perf/util/setup.py to make sure the python binding
shared object links with libtraceevent if -DHAVE_LIBTRACEEVENT is
present in CFLAGS.
Building with NO_LIBTRACEEVENT=1 uncovered some more build failures:
- Make building of data-convert-bt.c to CONFIG_LIBTRACEEVENT=y
- perf-$(CONFIG_LIBTRACEEVENT) += scripts/
- bpf_kwork.o needs also to be dependent on CONFIG_LIBTRACEEVENT=y
- The python binding needed some fixups and util/trace-event.c can't be
built and linked with the python binding shared object, so remove it
in tools/perf/util/setup.py and exclude it from the list of
dependencies in the python/perf.so Makefile.perf target.
Building without libtraceevent-devel installed uncovered more build
failures:
- The python binding tools/perf/util/python.c was assuming that
traceevent/parse-events.h was always available, which was the case
when we defaulted to using the in-kernel tools/lib/traceevent/ files,
now we need to enclose it under ifdef HAVE_LIBTRACEEVENT, just like
the other parts of it that deal with tracepoints.
- We have to ifdef the rules in the Build files with
CONFIG_LIBTRACEEVENT=y to build builtin-trace.c and
tools/perf/trace/beauty/ as we only ifdef setting CONFIG_TRACE=y when
setting NO_LIBTRACEEVENT=1 in the make command line, not when we don't
detect libtraceevent-devel installed in the system. Simplification here
to avoid these two ways of disabling builtin-trace.c and not having
CONFIG_TRACE=y when libtraceevent-devel isn't installed is the clean
way.
From Athira:
<quote>
tools/perf/arch/powerpc/util/Build
-perf-y += kvm-stat.o
+perf-$(CONFIG_LIBTRACEEVENT) += kvm-stat.o
</quote>
Then, ditto for arm64 and s390, detected by container cross build tests.
- s/390 uses test__checkevent_tracepoint() that is now only available if
HAVE_LIBTRACEEVENT is defined, enclose the callsite with ifder HAVE_LIBTRACEEVENT.
Also from Athira:
<quote>
With this change, I could successfully compile in these environment:
- Without libtraceevent-devel installed
- With libtraceevent-devel installed
- With “make NO_LIBTRACEEVENT=1”
</quote>
Then, finally rename CONFIG_TRACEEVENT to CONFIG_LIBTRACEEVENT for
consistency with other libraries detected in tools/perf/.
Signed-off-by: Ian Rogers <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Tested-by: Athira Rajeev <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Currently the 'MetricExpr' json value is passed from the json
file to the pmu-events.c. This change introduces an expression
tree that is parsed into. The parsing is done largely by using
operator overloading and python's 'eval' function. Two advantages
in doing this are:
1) Broken metrics fail at compile time rather than relying on
`perf test` to detect. `perf test` remains relevant for checking
event encoding and actual metric use.
2) The conversion to a string from the tree can minimize the metric's
string size, for example, preferring 1e6 over 1000000, avoiding
multiplication by 1 and removing unnecessary whitespace. On x86
this reduces the string size by 2,930bytes (0.07%).
In future changes it would be possible to programmatically
generate the json expressions (a single line of text and so a
pain to write manually) for an architecture using the expression
tree. This could avoid copy-pasting metrics for all architecture
variants.
v4. Doesn't simplify "0*SLOTS" to 0, as the pattern is used to fix
Intel metrics with topdown events.
v3. Avoids generic types on standard types like set that aren't
supported until Python 3.9, fixing an issue with Python 3.6
reported-by John Garry. v3 also fixes minor pylint issues and adds
a call to Simplify on the read expression tree.
v2. Improvements to type information.
Committer notes:
Added one-line fixer from Ian, see first Link: tag below.
Signed-off-by: Ian Rogers <[email protected]>
Reviewed-by: John Garry <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Sumanth Korikkar <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/CAP-5=fWa=zNK_ecpWGoGggHCQx7z-oW0eGMQf19Maywg0QK=4g@mail.gmail.com
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
merged uncore and hybrid events
In print_counter_aggrdata(), it skips some events that has no aggregate
count. It's actually for system-wide per-thread mode and merged uncore
and hybrid events.
Let's update the condition to check them explicitly.
Fixes: 91f85f98da7ab8c3 ("perf stat: Display event stats using aggr counts")
Reported-by: Athira Jajeev <[email protected]>
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Athira Jajeev <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Michael Petlan <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Xing Zhengjun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If LIBTRACEEVENT_DYNAMIC is enabled then avoid the install step for
the plugins. If disabled correct DESTDIR so that the plugins are
installed under <lib>/traceevent/plugins.
Fixes: ef019df01e207971 ("perf build: Install libtraceevent locally when building")
Reported-by: Alexander Gordeev <[email protected]>
Signed-off-by: Ian Rogers <[email protected]>
Cc: Alexander Gordeev <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
It is used in bpf_lock_contention.c and builtin-lock.c will be made
CONFIG_LIBTRACEEVENT=y conditional, so move it to machine.c, that is
always available.
This makes those 4 global variables for sched and lock text start and
end to move to 'struct machine' too, as conceivably we can have that
info for several machine instances, say some 'perf diff' like tool.
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: [email protected]
Link: http://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Multiple events in a group can belong to one or more PMUs, however
there are some limitations.
One of the limitations is that perf doesn't allow creating a group of
events from different hw PMUs.
Write a simple test to create various combinations of hw, sw and uncore
PMU events and verify group creation succeeds or fails as expected.
Signed-off-by: Ravi Bangoria <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Acked-by: Kan Liang <[email protected]>
Acked-by: Madhavan Srinivasan <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ananth Narayan <[email protected]>
Cc: Athira Jajeev <[email protected]>
Cc: Carsten Haitzler <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Sandipan Das <[email protected]>
Cc: Santosh Shukla <[email protected]>
Cc: Thomas Richter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|