| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata
on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can
be set to or parse from the packet for vxlan gbp option.
So do the mask when set it in lwtunnel, as it does in act_tunnel_key and
cls_flower.
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
As we can see from vxlan_build/parse_gbp_hdr(), when processing metadata
on vxlan rx/tx path, only dont_learn/policy_applied/policy_id fields can
be set to or parse from the packet for vxlan gbp option.
So we'd better do the mask when set it in act_tunnel_key and cls_flower.
Otherwise, when users don't know these bits, they may configure with a
value which can never be matched.
Reported-by: Shuang Li <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In tipc_buf_append() it may change skb's frag_list, and it causes
problems when this skb is cloned. skb_unclone() doesn't really
make this skb's flag_list available to change.
Shuang Li has reported an use-after-free issue because of this
when creating quite a few macvlan dev over the same dev, where
the broadcast packets will be cloned and go up to the stack:
[ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0
[ ] Call Trace:
[ ] dump_stack+0x7c/0xb0
[ ] print_address_description.constprop.7+0x1a/0x220
[ ] kasan_report.cold.10+0x37/0x7c
[ ] check_memory_region+0x183/0x1e0
[ ] pskb_expand_head+0x86d/0xea0
[ ] process_backlog+0x1df/0x660
[ ] net_rx_action+0x3b4/0xc90
[ ]
[ ] Allocated by task 1786:
[ ] kmem_cache_alloc+0xbf/0x220
[ ] skb_clone+0x10a/0x300
[ ] macvlan_broadcast+0x2f6/0x590 [macvlan]
[ ] macvlan_process_broadcast+0x37c/0x516 [macvlan]
[ ] process_one_work+0x66a/0x1060
[ ] worker_thread+0x87/0xb10
[ ]
[ ] Freed by task 3253:
[ ] kmem_cache_free+0x82/0x2a0
[ ] skb_release_data+0x2c3/0x6e0
[ ] kfree_skb+0x78/0x1d0
[ ] tipc_recvmsg+0x3be/0xa40 [tipc]
So fix it by using skb_unshare() instead, which would create a new
skb for the cloned frag and it'll be safe to change its frag_list.
The similar things were also done in sctp_make_reassembled_event(),
which is using skb_copy().
Reported-by: Shuang Li <[email protected]>
Fixes: 37e22164a8a3 ("tipc: rename and move message reassembly function")
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an
existing node, causing tipc_group_create_member() to leak memory. Let
tipc_group_add_to_tree() return an error in such a case, so that
tipc_group_create_member() can handle it properly.
Fixes: 75da2163dbb6 ("tipc: introduce communication groups")
Reported-and-tested-by: [email protected]
Cc: Hillf Danton <[email protected]>
Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13aff
Signed-off-by: Peilin Ye <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
flowi4_multipath_hash was added by the commit referenced below for
tunnels. Unfortunately, the patch did not initialize the new field
for several fast path lookups that do not initialize the entire flow
struct to 0. Fix those locations. Currently, flowi4_multipath_hash
is random garbage and affects the hash value computed by
fib_multipath_hash for multipath selection.
Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: David Ahern <[email protected]>
Cc: wenxu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Hauke Mehrtens says:
====================
net: lantiq: Fix bugs in NAPI handling
This fixes multiple bugs in the NAPI handling.
Changes since:
v1:
- removed stable tag from "net: lantiq: use netif_tx_napi_add() for TX NAPI"
- Check the NAPI budged in "net: lantiq: Use napi_complete_done()"
- Add extra fix "net: lantiq: Disable IRQs only if NAPI gets scheduled"
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The napi_schedule() call will only schedule the NAPI if it is not
already running. To make sure that we do not deactivate interrupts
without scheduling NAPI only deactivate the interrupts in case NAPI also
gets scheduled.
Signed-off-by: Hauke Mehrtens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use napi_complete_done() and activate the interrupts when this function
returns true. This way the generic NAPI code can take care of activating
the interrupts.
Signed-off-by: Hauke Mehrtens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
netif_tx_napi_add() should be used for NAPI in the TX direction instead
of the netif_napi_add() function.
Signed-off-by: Hauke Mehrtens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The call to netif_wake_queue() when the TX descriptors were freed was
missing. When there are no TX buffers available the TX queue will be
stopped, but it was not started again when they are available again,
this is fixed in this patch.
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Hauke Mehrtens <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some WinCE devices face connectivity issues via the NDIS interface. They
fail to register, resulting in -110 timeout errors and failures during the
probe procedure.
In this kind of WinCE devices, the Windows-side ndis driver needs quite
more time to be loaded and configured, so that the linux rndis host queries
to them fail to be responded correctly on time.
More specifically, when INIT is called on the WinCE side - no other
requests can be served by the Client and this results in a failed QUERY
afterwards.
The increase of the waiting time on the side of the linux rndis host in
the command-response loop leaves the INIT process to complete and respond
to a QUERY, which comes afterwards. The WinCE devices with this special
"feature" in their ndis driver are satisfied by this fix.
Signed-off-by: Olympia Giannou <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add missed suspend/resume callbacks to properly restore networking after
suspend/resume cycle.
Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac")
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Looks like u32p_replace_bits() should be used instead of
u32_replace_bits() which does not modifies the value but returns the
modified version.
Fixes: 2b9feef2b6c2 ("soc: qcom: ipa: filter and routing tables")
Signed-off-by: Vadym Kochan <[email protected]>
Reviewed-by: Alex Elder <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When calling hinic_close in hinic_set_channels, all queues are
stopped after netif_tx_disable, but some queue may be rewaken in
free_tx_poll by mistake while drv is handling tx irq. If one queue
is rewaken core may call hinic_xmit_frame to send pkt after
netif_tx_disable within a short time which may results in accessing
memory that has been already freed in hinic_close. So we call
napi_disable before netif_tx_disable in hinic_close to fix this bug.
Fixes: 2eed5a8b614b ("hinic: add set_channels ethtool_ops support")
Signed-off-by: Luo bin <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It's possible that the user specifies an interval that couldn't allow
any packet to be transmitted. This also avoids the issue of the
hrtimer handler starving the other threads because it's running too
often.
The solution is to reject interval sizes that according to the current
link speed wouldn't allow any packet to be transmitted.
Reported-by: [email protected]
Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2020-09-09
This series contains updates to i40e and igc drivers.
Stefan Assmann changes num_vlans to u16 to fix may be used uninitialized
error and propagates error in i40_set_vsi_promisc() for i40e.
Vinicius corrects timestamping latency values for i225 devices and
accounts for TX timestamping delay for igc.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This is the correct resolution for the conflict from
merging the "net" tree fix:
commit 26cb7085c898 ("enetc: Remove the mdio bus on PF probe bailout")
with the "net-next" new work:
commit 07095c025ac2 ("net: enetc: Use DT protocol information to set up the ports")
that moved mdio bus allocation to an ealier stage of
the PF probing routine.
Fixes: a57066b1a019 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Claudiu Manoil <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Increase Rx ring size to address issue where hardware is reaching
the receive work limit.
Before:
[ 102.223342] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.245695] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.251387] de2104x 0000:17:00.0 eth0: rx work limit reached
[ 102.267444] de2104x 0000:17:00.0 eth0: rx work limit reached
Signed-off-by: Lucy Yan <[email protected]>
Reviewed-by: Moritz Fischer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There is no @validate argument.
CC: Johannes Berg <[email protected]>
Fixes: 3de644035446 ("netlink: re-add parse/validate functions in strict mode")
Signed-off-by: Nicolas Dichtel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The
field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where
each value is a number of a buffer to direct that priority's traffic to.
That value is however never validated to lie within the bounds set by
DCBX_MAX_BUFFERS. The only driver that currently implements the callback is
mlx5 (maintainers CCd), and that does not do any validation either, in
particual allowing incorrect configuration if the prio2buffer value does
not fit into 4 bits.
Instead of offloading the need to validate the buffer index to drivers, do
it right there in core, and bounce the request if the value is too large.
CC: Parav Pandit <[email protected]>
CC: Saeed Mahameed <[email protected]>
Fixes: e549f6f9c098 ("net/dcb: Add dcbnl buffer attribute")
Signed-off-by: Petr Machata <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Ido Schimmel says:
====================
net: Fix bridge enslavement failure
Patch #1 fixes an issue in which an upper netdev cannot be enslaved to a
bridge when it has multiple netdevs with different parent identifiers
beneath it.
Patch #2 adds a test case using two netdevsim instances.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Test that an upper device of netdevs with different parent IDs can be
enslaved to a bridge.
The test fails without previous commit.
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When a netdev is enslaved to a bridge, its parent identifier is queried.
This is done so that packets that were already forwarded in hardware
will not be forwarded again by the bridge device between netdevs
belonging to the same hardware instance.
The operation fails when the netdev is an upper of netdevs with
different parent identifiers.
Instead of failing the enslavement, have dev_get_port_parent_id() return
'-EOPNOTSUPP' which will signal the bridge to skip the query operation.
Other callers of the function are not affected by this change.
Fixes: 7e1146e8c10c ("net: devlink: introduce devlink_compat_switch_id_get() helper")
Signed-off-by: Ido Schimmel <[email protected]>
Reported-by: Vasundhara Volam <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Release first buffer as last one since it contains references
to subsequent fragments. This code will be optimized introducing
multi-buffer bit in xdp_buff structure.
Fixes: ca0e014609f05 ("net: mvneta: move skb build after descriptors processing")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Acked-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Wait until the QDIO data connection is severed. Otherwise the device
might still be processing the buffers, and end up accessing skb data
that we already freed.
Fixes: 8b5026bc1693 ("s390/qeth: fix qdio teardown after early init error")
Signed-off-by: Julian Wiedmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove the weird space inside the NETIF_F_CSUM_MASK.
Signed-off-by: Miaohe Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to
invalidate dst entries"), we use blackhole_netdev to invalidate dst entries
instead of loopback device anymore.
Signed-off-by: Miaohe Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There are a couple bugs here:
1) If opt[1] is zero then this results in a forever loop. If the value
is less than 2 then it is invalid.
2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can
result in memory corruption.
In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead
of "len" because, if "opt[1]" is less than sizeof(valid_accm) then
"nak_len" gets out of sync and it can lead to memory corruption in the
next iterations through the loop. In case of LCP_OPTION_MAGIC, the
only valid value for opt[1] is 6, but the code is trying to log invalid
data so we should only discard the data when "len" is less than 6
because that leads to a read overflow.
Reported-by: ChenNan Of Chaitin Security Research Lab <[email protected]>
Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since the micrel phy driver calls phy_init_hw() as a workaround,
the commit 9886a4dbd2aa ("net: phy: call phy_disable_interrupts()
in phy_init_hw()") disables the interrupt unexpectedly. So,
call phy_disable_interrupts() in phy_attach_direct() instead.
Otherwise, the phy cannot link up after the ethernet cable was
disconnected.
Note that other drivers (like at803x.c) also calls phy_init_hw().
So, perhaps, the driver caused a similar issue too.
Fixes: 9886a4dbd2aa ("net: phy: call phy_disable_interrupts() in phy_init_hw()")
Signed-off-by: Yoshihiro Shimoda <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The previous change "hv_netvsc: Switch the data path at the right time
during hibernation" adds the call of netvsc_vf_changed() upon
NETDEV_CHANGE, so it's necessary to avoid the duplicate call and message
when the VF is brought UP or DOWN.
Signed-off-by: Dexuan Cui <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When netvsc_resume() is called, the mlx5 VF NIC has not been resumed yet,
so in the future the host might sliently fail the call netvsc_vf_changed()
-> netvsc_switch_datapath() there, even if the call works now.
Call netvsc_vf_changed() in the NETDEV_CHANGE event handler: at that time
the mlx5 VF NIC has been resumed.
Fixes: 19162fd4063a ("hv_netvsc: Fix hibernation for mlx5 VF driver")
Signed-off-by: Dexuan Cui <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently there is concurrent reset and enqueue operation for the
same lockless qdisc when there is no lock to synchronize the
q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in
qdisc_deactivate() called by dev_deactivate_queue(), which may cause
out-of-bounds access for priv->ring[] in hns3 driver if user has
requested a smaller queue num when __dev_xmit_skb() still enqueue a
skb with a larger queue_mapping after the corresponding qdisc is
reset, and call hns3_nic_net_xmit() with that skb later.
Reused the existing synchronize_net() in dev_deactivate_many() to
make sure skb with larger queue_mapping enqueued to old qdisc(which
is saved in dev_queue->qdisc_sleeping) will always be reset when
dev_reset_queue() is called.
Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Yunsheng Lin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Documentation/devicetree/bindings/net/dsa/dsa.txt says that the phy-mode
property should be specified on port nodes. However, the microchip
drivers read it from the switch node.
Let the driver use the per-port property and fall back to the old
location with a warning.
Fix in-tree users.
Signed-off-by: Helmut Grohne <[email protected]>
Link: https://lore.kernel.org/netdev/20200617082235.GA1523@laureti-dev/
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
mptcp_pm_nl_get_local_id may be called in interrupt context, so we need to
use GFP_ATOMIC flag to allocate memory to avoid sleeping in atomic context.
[ 280.209809] BUG: sleeping function called from invalid context at mm/slab.h:498
[ 280.209812] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1680, name: kworker/1:3
[ 280.209814] INFO: lockdep is turned off.
[ 280.209816] CPU: 1 PID: 1680 Comm: kworker/1:3 Tainted: G W 5.9.0-rc3-mptcp+ #146
[ 280.209818] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 280.209820] Workqueue: events mptcp_worker
[ 280.209822] Call Trace:
[ 280.209824] <IRQ>
[ 280.209826] dump_stack+0x77/0xa0
[ 280.209829] ___might_sleep.cold+0xa6/0xb6
[ 280.209832] kmem_cache_alloc_trace+0x1d1/0x290
[ 280.209835] mptcp_pm_nl_get_local_id+0x23c/0x410
[ 280.209840] subflow_init_req+0x1e9/0x2ea
[ 280.209843] ? inet_reqsk_alloc+0x1c/0x120
[ 280.209845] ? kmem_cache_alloc+0x264/0x290
[ 280.209849] tcp_conn_request+0x303/0xae0
[ 280.209854] ? printk+0x53/0x6a
[ 280.209857] ? tcp_rcv_state_process+0x28f/0x1374
[ 280.209859] tcp_rcv_state_process+0x28f/0x1374
[ 280.209864] ? tcp_v4_do_rcv+0xb3/0x1f0
[ 280.209866] tcp_v4_do_rcv+0xb3/0x1f0
[ 280.209869] tcp_v4_rcv+0xed6/0xfa0
[ 280.209873] ip_protocol_deliver_rcu+0x28/0x270
[ 280.209875] ip_local_deliver_finish+0x89/0x120
[ 280.209877] ip_local_deliver+0x180/0x220
[ 280.209881] ip_rcv+0x166/0x210
[ 280.209885] __netif_receive_skb_one_core+0x82/0x90
[ 280.209888] process_backlog+0xd6/0x230
[ 280.209891] net_rx_action+0x13a/0x410
[ 280.209895] __do_softirq+0xcf/0x468
[ 280.209899] asm_call_on_stack+0x12/0x20
[ 280.209901] </IRQ>
[ 280.209903] ? ip_finish_output2+0x240/0x9a0
[ 280.209906] do_softirq_own_stack+0x4d/0x60
[ 280.209908] do_softirq.part.0+0x2b/0x60
[ 280.209911] __local_bh_enable_ip+0x9a/0xa0
[ 280.209913] ip_finish_output2+0x264/0x9a0
[ 280.209916] ? rcu_read_lock_held+0x4d/0x60
[ 280.209920] ? ip_output+0x7a/0x250
[ 280.209922] ip_output+0x7a/0x250
[ 280.209925] ? __ip_finish_output+0x330/0x330
[ 280.209928] __ip_queue_xmit+0x1dc/0x5a0
[ 280.209931] __tcp_transmit_skb+0xa0f/0xc70
[ 280.209937] tcp_connect+0xb03/0xff0
[ 280.209939] ? lockdep_hardirqs_on_prepare+0xe7/0x190
[ 280.209942] ? ktime_get_with_offset+0x125/0x150
[ 280.209944] ? trace_hardirqs_on+0x1c/0xe0
[ 280.209948] tcp_v4_connect+0x449/0x550
[ 280.209953] __inet_stream_connect+0xbb/0x320
[ 280.209955] ? mark_held_locks+0x49/0x70
[ 280.209958] ? lockdep_hardirqs_on_prepare+0xe7/0x190
[ 280.209960] ? __local_bh_enable_ip+0x6b/0xa0
[ 280.209963] inet_stream_connect+0x32/0x50
[ 280.209966] __mptcp_subflow_connect+0x1fd/0x242
[ 280.209972] mptcp_pm_create_subflow_or_signal_addr+0x2db/0x600
[ 280.209975] mptcp_worker+0x543/0x7a0
[ 280.209980] process_one_work+0x26d/0x5b0
[ 280.209984] ? process_one_work+0x5b0/0x5b0
[ 280.209987] worker_thread+0x48/0x3d0
[ 280.209990] ? process_one_work+0x5b0/0x5b0
[ 280.209993] kthread+0x117/0x150
[ 280.209996] ? kthread_park+0x80/0x80
[ 280.209998] ret_from_fork+0x22/0x30
Fixes: 01cacb00b35cb ("mptcp: add netlink-based PM")
Signed-off-by: Geliang Tang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Geliang Tang says:
====================
mptcp: fix subflow's local_id/remote_id issues
v2:
- add Fixes tags;
- simply with 'return addresses_equal';
- use 'reversed Xmas tree' way.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch set the init remote_id to zero, otherwise it will be a random
number.
Then it added the missing subflow's remote_id setting code both in
__mptcp_subflow_connect and in subflow_ulp_clone.
Fixes: 01cacb00b35cb ("mptcp: add netlink-based PM")
Fixes: ec3edaa7ca6ce ("mptcp: Add handling of outgoing MP_JOIN requests")
Fixes: f296234c98a8f ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In mptcp_pm_nl_get_local_id, skc_local is the same as msk_local, so it
always return 0. Thus every subflow's local_id is 0. It's incorrect.
This patch fixed this issue.
Also, we need to ignore the zero address here, like 0.0.0.0 in IPv4. When
we use the zero address as a local address, it means that we can use any
one of the local addresses. The zero address is not a new address, we don't
need to add it to PM, so this patch added a new function address_zero to
check whether an address is the zero address, if it is, we ignore this
address.
Fixes: 01cacb00b35cb ("mptcp: add netlink-based PM")
Signed-off-by: Geliang Tang <[email protected]>
Reviewed-by: Matthieu Baerts <[email protected]>
Reported-by: kernel test robot <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.
----------
#include <sys/socket.h>
#include <unistd.h>
#include <sys/wait.h>
int main(int argc, char *argv[])
{
int fds[2] = { -1, -1 };
socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
if (fork() == 0)
_exit(read(fds[0], NULL, 1));
shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
wait(NULL); /* To be woken up by _exit(). */
return 0;
}
----------
Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.
Signed-off-by: Tetsuo Handa <[email protected]>
Acked-by: Ying Xue <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Evgeniy does not have the time nor capacity to maintain the
connector subsystem any longer, so just move it under networking
as that is effectively what has been happening lately.
Signed-off-by: David S. Miller <[email protected]>
|
|
When timestamping a packet there's a delay between the start of the
packet and the point where the hardware actually captures the
timestamp. This difference needs to be considered if we want accurate
timestamps.
This was done on the RX side, but not on the TX side.
Fixes: 2c344ae24501 ("igc: Add support for TX timestamping")
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The previous timestamping latency numbers were obtained by
interpolating the i210 numbers with the i225 crystal clock value. That
calculation was wrong.
Use the correct values from real measurements.
Fixes: 81b055205e8b ("igc: Add support for RX timestamping")
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The for loop in i40e_set_vsi_promisc() reports errors via dev_err() but
does not propagate the error up the call chain. Instead it continues the
loop and potentially overwrites the reported error value.
This results in the error being recorded in the log buffer, but the
caller might never know anything went the wrong way.
To avoid this situation i40e_set_vsi_promisc() needs to temporarily store
the error after reporting it. This is still not optimal as multiple
different errors may occur, so store the first error and hope that's
the main issue.
Fixes: 37d318d7805f (i40e: Remove scheduling while atomic possibility)
Reported-by: Michal Schmidt <[email protected]>
Signed-off-by: Stefan Assmann <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c: In function ‘i40e_set_vsi_promisc’:
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:1176:14: error: ‘aq_ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
i40e_status aq_ret;
In case the code inside the if statement and the for loop does not get
executed aq_ret will be uninitialized when the variable gets returned at
the end of the function.
Avoid this by changing num_vlans from int to u16, so aq_ret always gets
set. Making this change in additional places as num_vlans should never
be negative.
Fixes: 37d318d7805f ("i40e: Remove scheduling while atomic possibility")
Signed-off-by: Stefan Assmann <[email protected]>
Acked-by: Jakub Kicinski <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Igor Russkikh says:
====================
net: qed disable aRFS in NPAR and 100G
This patchset fixes some recent issues found by customers.
v3:
resending on Dmitry's behalf
v2:
correct hash in Fixes tag
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix the assert during VF driver installation when the personality is iWARP
Fixes: 1fe614d10f45 ("qed: Relax VF firmware requirements")
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In some configurations ARFS cannot be used, so disable it if device
is not capable.
Fixes: e4917d46a653 ("qede: Add aRFS support")
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In CMT and NPAR the PF is unknown when the GFS block processes the
packet. Therefore cannot use searcher as it has a per PF database,
and thus ARFS must be disabled.
Fixes: d51e4af5c209 ("qed: aRFS infrastructure support")
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: Michal Kalderon <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.9
First set of fixes for v5.9, small but important.
brcmfmac
* fix a throughput regression on bcm4329
mt76
* fix a regression with stations reconnecting on mt7616
* properly free tx skbs, it was working by accident before
mwifiex
* fix a regression with 256 bit encryption keys
wlcore
* revert AES CMAC support as it caused a regression
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Jason A. Donenfeld says:
====================
wireguard fixes for 5.9-rc5
Yesterday, Eric reported a race condition found by syzbot. This series
contains two commits, one that fixes the direct issue, and another that
addresses the more general issue, as a defense in depth.
1) The basic problem syzbot unearthed was that one particular mutation
of handshake->entry was not protected by the handshake mutex like the
other cases, so this patch basically just reorders a line to make
sure the mutex is actually taken at the right point. Most of the work
here went into making sure the race was fully understood and making a
reproducer (which syzbot was unable to do itself, due to the rarity
of the race).
2) Eric's initial suggestion for fixing this was taking a spinlock
around the hash table replace function where the null ptr deref was
happening. This doesn't address the main problem in the most precise
possible way like (1) does, but it is a good suggestion for
defense-in-depth, in case related issues come up in the future, and
basically costs nothing from a performance perspective. I thought it
aided in implementing a good general rule: all mutators of that hash
table take the table lock. So that's part of this series as a
companion.
Both of these contain Fixes: tags and are good candidates for stable.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Eric's suggested fix for the previous commit's mentioned race condition
was to simply take the table->lock in wg_index_hashtable_replace(). The
table->lock of the hash table is supposed to protect the bucket heads,
not the entires, but actually, since all the mutator functions are
already taking it, it makes sense to take it too for the test to
hlist_unhashed, as a defense in depth measure, so that it no longer
races with deletions, regardless of what other locks are protecting
individual entries. This is sensible from a performance perspective
because, as Eric pointed out, the case of being unhashed is already the
unlikely case, so this won't add common contention. And comparing
instructions, this basically doesn't make much of a difference other
than pushing and popping %r13, used by the new `bool ret`. More
generally, I like the idea of locking consistency across table mutator
functions, and this might let me rest slightly easier at night.
Suggested-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/wireguard/[email protected]/
Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|