aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26selftests/bpf: Use recv_timeout() instead of retriesYucong Sun1-55/+20
We use non-blocking sockets in those tests, retrying for EAGAIN is ugly because there is no upper bound for the packet arrival time, at least in theory. After we fix poll() on sockmap sockets, now we can switch to select()+recv(). Signed-off-by: Yucong Sun <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-26net: Implement ->sock_is_readable() for UDP and AF_UNIXCong Wang4-0/+10
Yucong noticed we can't poll() sockets in sockmap even when they are the destination sockets of redirections. This is because we never poll any psock queues in ->poll(), except for TCP. With ->sock_is_readable() now we can overwrite >sock_is_readable(), invoke and implement it for both UDP and AF_UNIX sockets. Reported-by: Yucong Sun <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-26skmsg: Extract and reuse sk_msg_is_readable()Cong Wang3-14/+16
tcp_bpf_sock_is_readable() is pretty much generic, we can extract it and reuse it for non-TCP sockets. Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-26net: Rename ->stream_memory_read to ->sock_is_readableCong Wang6-11/+14
The proto ops ->stream_memory_read() is currently only used by TCP to check whether psock queue is empty or not. We need to rename it before reusing it for non-TCP protocols, and adjust the exsiting users accordingly. Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-26tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict functionLiu Jian1-0/+12
With two Msgs, msgA and msgB and a user doing nonblocking sendmsg calls (or multiple cores) on a single socket 'sk' we could get the following flow. msgA, sk msgB, sk ----------- --------------- tcp_bpf_sendmsg() lock(sk) psock = sk->psock tcp_bpf_sendmsg() lock(sk) ... blocking tcp_bpf_send_verdict if (psock->eval == NONE) psock->eval = sk_psock_msg_verdict .. < handle SK_REDIRECT case > release_sock(sk) < lock dropped so grab here > ret = tcp_bpf_sendmsg_redir psock = sk->psock tcp_bpf_send_verdict lock_sock(sk) ... blocking on B if (psock->eval == NONE) <- boom. psock->eval will have msgA state The problem here is we dropped the lock on msgA and grabbed it with msgB. Now we have old state in psock and importantly psock->eval has not been cleared. So msgB will run whatever action was done on A and the verdict program may never see it. Fixes: 604326b41a6fb ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Liu Jian <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-22cgroup: Fix memory leak caused by missing cgroup_bpf_offlineQuanyang Wang1-1/+3
When enabling CONFIG_CGROUP_BPF, kmemleak can be observed by running the command as below: $mount -t cgroup -o none,name=foo cgroup cgroup/ $umount cgroup/ unreferenced object 0xc3585c40 (size 64): comm "mount", pid 425, jiffies 4294959825 (age 31.990s) hex dump (first 32 bytes): 01 00 00 80 84 8c 28 c0 00 00 00 00 00 00 00 00 ......(......... 00 00 00 00 00 00 00 00 6c 43 a0 c3 00 00 00 00 ........lC...... backtrace: [<e95a2f9e>] cgroup_bpf_inherit+0x44/0x24c [<1f03679c>] cgroup_setup_root+0x174/0x37c [<ed4b0ac5>] cgroup1_get_tree+0x2c0/0x4a0 [<f85b12fd>] vfs_get_tree+0x24/0x108 [<f55aec5c>] path_mount+0x384/0x988 [<e2d5e9cd>] do_mount+0x64/0x9c [<208c9cfe>] sys_mount+0xfc/0x1f4 [<06dd06e0>] ret_fast_syscall+0x0/0x48 [<a8308cb3>] 0xbeb4daa8 This is because that since the commit 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") root_cgrp->bpf.refcnt.data is allocated by the function percpu_ref_init in cgroup_bpf_inherit which is called by cgroup_setup_root when mounting, but not freed along with root_cgrp when umounting. Adding cgroup_bpf_offline which calls percpu_ref_kill to cgroup_kill_sb can free root_cgrp->bpf.refcnt.data in umount path. This patch also fixes the commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself"). A cgroup_bpf_offline is needed to do a cleanup that frees the resources which are allocated by cgroup_bpf_inherit in cgroup_setup_root. And inside cgroup_bpf_offline, cgroup_get() is at the beginning and cgroup_put is at the end of cgroup_bpf_release which is called by cgroup_bpf_offline. So cgroup_bpf_offline can keep the balance of cgroup's refcount. Fixes: 2b0d3d3e4fcf ("percpu_ref: reduce memory footprint of percpu_ref in fast path") Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Signed-off-by: Quanyang Wang <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Roman Gushchin <[email protected]> Acked-by: John Fastabend <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-22bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch()Xu Kuohai1-2/+3
1. The ufd in generic_map_update_batch() should be read from batch.map_fd; 2. A call to fdget() should be followed by a symmetric call to fdput(). Fixes: aa2e93b8e58e ("bpf: Add generic support for update and delete batch ops") Signed-off-by: Xu Kuohai <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-22Merge branch 'Fix up bpf_jit_limit some more'Alexei Starovoitov5-2/+15
Lorenz Bauer says: ==================== Fix some inconsistencies of bpf_jit_limit on non-x86 platforms. I've dropped exposing bpf_jit_current since we couldn't agree on file modes, correct names, etc. ==================== Signed-off-by: Alexei Starovoitov <[email protected]>
2021-10-22bpf: Prevent increasing bpf_jit_limit above maxLorenz Bauer3-2/+5
Restrict bpf_jit_limit to the maximum supported by the arch's JIT. Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-22bpf: Define bpf_jit_alloc_exec_limit for arm64 JITLorenz Bauer1-0/+5
Expose the maximum amount of useable memory from the arm64 JIT. Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-22bpf: Define bpf_jit_alloc_exec_limit for riscv JITLorenz Bauer1-0/+5
Expose the maximum amount of useable memory from the riscv JIT. Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Luke Nelson <[email protected]> Acked-by: Björn Töpel <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-10-20ptp: Fix possible memory leak in ptp_clock_register()Yang Yingliang1-4/+11
I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release(). Reported-by: Hulk Robot <[email protected]> Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: stmmac: Fix E2E delay mechanismKurt Kanzenbach1-1/+1
When utilizing End to End delay mechanism, the following error messages show up: |root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m |ptp4l[950.573]: selected /dev/ptp3 as PTP clock |ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1 |ptp4l[956.879]: selected best master clock 001395.fffe.4897b4 |ptp4l[956.879]: port 1: assuming the grand master role |ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER |ptp4l[962.017]: port 1: received DELAY_REQ without timestamp |ptp4l[962.273]: port 1: received DELAY_REQ without timestamp |ptp4l[963.090]: port 1: received DELAY_REQ without timestamp Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") already addresses this problem for the dwmac v5.10. However, same holds true for all dwmacs above version v4.10. Correct the check accordingly. Afterwards everything works as expected. Tested on Intel Atom(R) x6414RE Processor. Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Suggested-by: Ong Boon Leong <[email protected]> Signed-off-by: Kurt Kanzenbach <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20nfc: st95hf: Make spi remove() callback return zeroUwe Kleine-König1-4/+2
If something goes wrong in the remove callback, returning an error code just results in an error message. The device still disappears. So don't skip disabling the regulator in st95hf_remove() if resetting the controller via spi fails. Also don't return an error code which just results in two error messages. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20Merge branch 'hns3-fixes'David S. Miller10-23/+68
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: hns3: disable sriov before unload hclge layerPeng Li3-0/+23
HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko. hns3.ko includes network stack and pci_driver, hclge.ko includes HW device action, algo_ops and timer task, hnae3.ko includes some register function. When SRIOV is enable and hclge.ko is removed, HW device is unloaded but VF still exists, PF will not reply VF mbx messages, and cause errors. This patch fix it by disable SRIOV before remove hclge.ko. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Peng Li <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: hns3: fix vf reset workqueue cannot exitYufeng Mo1-3/+3
The task of VF reset is performed through the workqueue. It checks the value of hdev->reset_pending to determine whether to exit the loop. However, the value of hdev->reset_pending may also be assigned by the interrupt function hclgevf_misc_irq_handle(), which may cause the loop fail to exit and keep occupying the workqueue. This loop is not necessary, so remove it and the workqueue will be rescheduled if the reset needs to be retried or a new reset occurs. Fixes: 1cc9bc6e5867 ("net: hns3: split hclgevf_reset() into preparing and rebuilding part") Signed-off-by: Yufeng Mo <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: hns3: schedule the polling again when allocation failsYunsheng Lin1-10/+12
Currently when there is a rx page allocation failure, it is possible that polling may be stopped if there is no more packet to be reveiced, which may cause queue stall problem under memory pressure. This patch makes sure polling is scheduled again when there is any rx page allocation failure, and polling will try to allocate receive buffers until it succeeds. Now the allocation retry is added, it is unnecessary to do the rx page allocation at the end of rx cleaning, so remove it. And reset the unused_count to zero after calling hns3_nic_alloc_rx_buffers() to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under memory pressure. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: hns3: fix for miscalculation of rx unused descYunsheng Lin2-0/+9
rx unused desc is the desc that need attatching new buffer before refilling to hw to receive new packet, the number of desc need attatching new buffer is calculated using next_to_use and next_to_clean. when next_to_use == next_to_clean, currently hns3 driver assumes that all the desc has the buffer attatched, but 'next_to_use == next_to_clean' also means all the desc need attatching new buffer if hw has comsumed all the desc and the driver has not attatched any buffer to the desc yet. This patch adds 'refill' in desc_cb to indicate whether a new buffer has been refilled to a desc. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: hns3: fix the max tx size according to user manualYunsheng Lin2-9/+4
Currently the max tx size supported by the hw is calculated by using the max BD num supported by the hw. According to the hw user manual, the max tx size is fixed value for both non-TSO and TSO skb. This patch updates the max tx size according to the manual. Fixes: 8ae10cfb5089("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: hns3: add limit ets dwrr bandwidth cannot be 0Guangbin Huang1-0/+9
If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP mode. In this case, this tc may occupy all the tx bandwidth if it has huge traffic, so it violates the purpose of the user setting. To fix this problem, limit the ets dwrr bandwidth must greater than 0. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: hns3: reset DWRR of unused tc to zeroGuangbin Huang1-0/+2
Currently, DWRR of tc will be initialized to a fixed value when this tc is enabled, but it is not been reset to 0 when this tc is disabled. It cause a problem that the DWRR of unused tc is not 0 after using tc tool to add and delete multi-tc parameters. For examples, after enabling 4 TCs and restoring to 1 TC by follow tc commands: $ tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 0 1 2 3 queues \ 8@0 8@8 8@16 8@24 hw 1 mode channel $ tc qdisc del dev eth0 root Now there is just one TC is enabled for eth0, but the tc info querying by debugfs is shown as follow: $ cat /mnt/hns3/0000:7d:00.0/tm/tc_sch_info enabled tc number: 1 weight_offset: 14 TC MODE WEIGHT 0 dwrr 100 1 dwrr 100 2 dwrr 100 3 dwrr 100 4 dwrr 0 5 dwrr 0 6 dwrr 0 7 dwrr 0 This patch fixes it by resetting DWRR of tc to 0 when tc is disabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20net: hns3: Add configuration of TM QCN error eventJiaran Zhang2-1/+6
Add configuration of interrupt type and fifo interrupt enable of TM QCN error event if enabled, otherwise this event will not be reported when there is error. Fixes: d914971df022 ("net: hns3: remove redundant query in hclge_config_tm_hw_err_int()") Signed-off-by: Jiaran Zhang <[email protected]> Signed-off-by: Guangbin Huang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-20vrf: Revert "Reset skb conntrack connection..."Eugene Crosser1-4/+0
This reverts commit 09e856d54bda5f288ef8437a90ab2b9b3eab83d1. When an interface is enslaved in a VRF, prerouting conntrack hook is called twice: once in the context of the original input interface, and once in the context of the VRF interface. If no special precausions are taken, this leads to creation of two conntrack entries instead of one, and breaks SNAT. Commit above was intended to avoid creation of extra conntrack entries when input interface is enslaved in a VRF. It did so by resetting conntrack related data associated with the skb when it enters VRF context. However it breaks netfilter operation. Imagine a use case when conntrack zone must be assigned based on the original input interface, rather than VRF interface (that would make original interfaces indistinguishable). One could create netfilter rules similar to these: chain rawprerouting { type filter hook prerouting priority raw; iif realiface1 ct zone set 1 return iif realiface2 ct zone set 2 return } This works before the mentioned commit, but not after: zone assignment is "forgotten", and any subsequent NAT or filtering that is dependent on the conntrack zone does not work. Here is a reproducer script that demonstrates the difference in behaviour. ========== #!/bin/sh # This script demonstrates unexpected change of nftables behaviour # caused by commit 09e856d54bda5f28 ""vrf: Reset skb conntrack # connection on VRF rcv" # https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=09e856d54bda5f288ef8437a90ab2b9b3eab83d1 # # Before the commit, it was possible to assign conntrack zone to a # packet (or mark it for `notracking`) in the prerouting chanin, raw # priority, based on the `iif` (interface from which the packet # arrived). # After the change, # if the interface is enslaved in a VRF, such # assignment is lost. Instead, assignment based on the `iif` matching # the VRF master interface is honored. Thus it is impossible to # distinguish packets based on the original interface. # # This script demonstrates this change of behaviour: conntrack zone 1 # or 2 is assigned depending on the match with the original interface # or the vrf master interface. It can be observed that conntrack entry # appears in different zone in the kernel versions before and after # the commit. IPIN=172.30.30.1 IPOUT=172.30.30.2 PFXL=30 ip li sh vein >/dev/null 2>&1 && ip li del vein ip li sh tvrf >/dev/null 2>&1 && ip li del tvrf nft list table testct >/dev/null 2>&1 && nft delete table testct ip li add vein type veth peer veout ip li add tvrf type vrf table 9876 ip li set veout master tvrf ip li set vein up ip li set veout up ip li set tvrf up /sbin/sysctl -w net.ipv4.conf.veout.accept_local=1 /sbin/sysctl -w net.ipv4.conf.veout.rp_filter=0 ip addr add $IPIN/$PFXL dev vein ip addr add $IPOUT/$PFXL dev veout nft -f - <<__END__ table testct { chain rawpre { type filter hook prerouting priority raw; iif { veout, tvrf } meta nftrace set 1 iif veout ct zone set 1 return iif tvrf ct zone set 2 return notrack } chain rawout { type filter hook output priority raw; notrack } } __END__ uname -rv conntrack -F ping -W 1 -c 1 -I vein $IPOUT conntrack -L Signed-off-by: Eugene Crosser <[email protected]> Acked-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-19net: dsa: Fix an error handling path in 'dsa_switch_parse_ports_of()'Christophe JAILLET1-2/+7
If we return before the end of the 'for_each_child_of_node()' iterator, the reference taken on 'port' must be released. Add the missing 'of_node_put()' calls. Fixes: 83c0afaec7b7 ("net: dsa: Add new binding implementation") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/15d5310d1d55ad51c1af80775865306d92432e03.1634587046.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-19Merge tag 'linux-can-fixes-for-5.15-20211019' of ↵David S. Miller1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-10-19 this is a pull request of a single patch for net/master. The patch is by me and fixes the error handling in case of a FC timeout in the TX path of the ISOTOP CAN protocol. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-19cavium: Fix return values of the probe functionZheyu Ma1-2/+2
During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-19mISDN: Fix return values of the probe functionZheyu Ma1-4/+4
During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-19can: isotp: isotp_sendmsg(): fix return error on FC timeout on TX pathMarc Kleine-Budde1-0/+3
When the a large chunk of data send and the receiver does not send a Flow Control frame back in time, the sendmsg() does not return a error code, but the number of bytes sent corresponding to the size of the packet. If a timeout occurs the isotp_tx_timer_handler() is fired, sets sk->sk_err and calls the sk->sk_error_report() function. It was wrongly expected that the error would be propagated to user space in every case. For isotp_sendmsg() blocking on wait_event_interruptible() this is not the case. This patch fixes the problem by checking if sk->sk_err is set and returning the error to user space. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://github.com/hartkopp/can-isotp/issues/42 Link: https://github.com/hartkopp/can-isotp/pull/43 Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Reported-by: Sottas Guillaume (LMB) <[email protected]> Tested-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-18nfp: bpf: silence bitwise vs. logical OR warningNathan Chancellor1-2/+2
A new warning in clang points out two places in this driver where boolean expressions are being used with a bitwise OR instead of a logical one: drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/net/ethernet/netronome/nfp/nfp_asm.c:199:20: note: cast one or both operands to int to silence this warning drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] reg->src_lmextn = swreg_lmextn(lreg) | swreg_lmextn(rreg); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || drivers/net/ethernet/netronome/nfp/nfp_asm.c:280:20: note: cast one or both operands to int to silence this warning 2 errors generated. The motivation for the warning is that logical operations short circuit while bitwise operations do not. In this case, it does not seem like short circuiting is harmful so implement the suggested fix of changing to a logical operation to fix the warning. Link: https://github.com/ClangBuiltLinux/linux/issues/1479 Reported-by: Nick Desaulniers <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-10-18selftests/tls: add SM4 algorithm dependency for tls selftestsTianjia Zhang1-0/+1
Kernel TLS test has added SM4 GCM/CCM algorithm support, but SM4 algorithm is not compiled by default, this patch add SM4 config dependency. Reported-by: Hangbin Liu <[email protected]> Reported-by: kernel test robot <[email protected]> Signed-off-by: Tianjia Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18mctp: Be explicit about struct sockaddr_mctp paddingJeremy Kerr1-0/+2
We currently have some implicit padding in struct sockaddr_mctp. This patch makes this padding explicit, and ensures we have consistent layout on platforms with <32bit alignmnent. Fixes: 60fc63981693 ("mctp: Add sockaddr_mctp to uapi") Signed-off-by: Jeremy Kerr <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18mctp: unify sockaddr_mctp typesJeremy Kerr3-8/+9
Use the more precise __kernel_sa_family_t for smctp_family, to match struct sockaddr. Also, use an unsigned int for the network member; negative networks don't make much sense. We're already using unsigned for mctp_dev and mctp_skb_cb, but need to change mctp_sock to suit. Fixes: 60fc63981693 ("mctp: Add sockaddr_mctp to uapi") Signed-off-by: Jeremy Kerr <[email protected]> Acked-by: Eugene Syromiatnikov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18cavium: Return negative value when pci_alloc_irq_vectors() failsZheyu Ma1-1/+1
During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18net: mscc: ocelot: Add of_node_put() before gotoWan Jiabing1-0/+1
Fix following coccicheck warning: ./drivers/net/ethernet/mscc/ocelot_vsc7514.c:946:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto. Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18net: sparx5: Add of_node_put() before gotoWan Jiabing1-0/+1
Fix following coccicheck warning: ./drivers/net/ethernet/microchip/sparx5/s4parx5_main.c:723:1-33: WARNING: Function for_each_available_child_of_node should have of_node_put() before goto Early exits from for_each_available_child_of_node should decrement the node reference counter. Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18net/sched: act_ct: Fix byte count on fragmented packetsPaul Blakey1-1/+1
First fragmented packets (frag offset = 0) byte len is zeroed when stolen by ip_defrag(). And since act_ct update the stats only afterwards (at end of execute), bytes aren't correctly accounted for such packets. To fix this, move stats update to start of action execute. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Paul Blakey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18net: dsa: mt7530: correct ds->num_portsDENG Qingfang1-7/+1
Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary dsa_port's and call mt7530_port_disable for non-existent ports. Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in port_enable/disable is no longer required. Cc: [email protected] Signed-off-by: DENG Qingfang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18net: dsa: lantiq_gswip: fix register definitionAleksander Jan Bajkowski1-1/+1
I compared the register definitions with the D-Link DWR-966 GPL sources and found that the PUAFD field definition was incorrect. This definition is unused and causes no issues. Fixes: 14fceff4771e ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Aleksander Jan Bajkowski <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-10-18Merge tag 'linux-can-fixes-for-5.15-20211017' of ↵David S. Miller8-42/+79
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-10-17 this is a pull request of 11 patches for net/master. The first 4 patches are by Ziyang Xuan and Zhang Changzhong and fix 1 use after free and 3 standard conformance problems in the j1939 CAN stack. The next 2 patches are by Ziyang Xuan and fix 2 concurrency problems in the ISOTP CAN stack. Yoshihiro Shimoda's patch for the rcar_can fix suspend/resume on not running CAN interfaces. Aswath Govindraju's patch for the m_can driver fixes access for MMIO devices. Zheyu Ma contributes a patch for the peak_pci driver to fix a use after free. Stephane Grosjean's 2 patches fix CAN error state handling in the peak_usb driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-10-18hamradio: baycom_epp: fix build for UMLRandy Dunlap1-3/+3
On i386, the baycom_epp driver wants to inspect X86 CPU features (TSC) and then act on that data, but that info is not available when running on UML, so prevent that test and do the default action. Prevents this build error on UML + i386: ../drivers/net/hamradio/baycom_epp.c: In function ‘epp_bh’: ../drivers/net/hamradio/baycom_epp.c:630:6: error: implicit declaration of function ‘boot_cpu_has’; did you mean ‘get_cpu_mask’? [-Werror=implicit-function-declaration] if (boot_cpu_has(X86_FEATURE_TSC)) \ ^ ../drivers/net/hamradio/baycom_epp.c:658:2: note: in expansion of macro ‘GETTICK’ GETTICK(time1); Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver") Signed-off-by: Randy Dunlap <[email protected]> Cc: [email protected] Cc: Jeff Dike <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: Anton Ivanov <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Thomas Sailer <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2021-10-17can: peak_usb: pcan_usb_fd_decode_status(): remove unnecessary test on the ↵Stephane Grosjean1-2/+1
nullity of a pointer Since alloc_can_err_skb() puts NULL in cf in the case when skb cannot be allocated and can_change_state() handles the case when cf is NULL, the test on the nullity of skb is now unnecessary. Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Stephane Grosjean <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-17can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state ↵Stephane Grosjean1-3/+2
notification This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Stephane Grosjean <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-17can: peak_pci: peak_pci_remove(): fix UAFZheyu Ma1-5/+4
When remove the module peek_pci, referencing 'chan' again after releasing 'dev' will cause UAF. Fix this by releasing 'dev' later. The following log reveals it: [ 35.961814 ] BUG: KASAN: use-after-free in peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.963414 ] Read of size 8 at addr ffff888136998ee8 by task modprobe/5537 [ 35.965513 ] Call Trace: [ 35.965718 ] dump_stack_lvl+0xa8/0xd1 [ 35.966028 ] print_address_description+0x87/0x3b0 [ 35.966420 ] kasan_report+0x172/0x1c0 [ 35.966725 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967137 ] ? trace_irq_enable_rcuidle+0x10/0x170 [ 35.967529 ] ? peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.967945 ] __asan_report_load8_noabort+0x14/0x20 [ 35.968346 ] peak_pci_remove+0x16f/0x270 [peak_pci] [ 35.968752 ] pci_device_remove+0xa9/0x250 Fixes: e6d9c80b7ca1 ("can: peak_pci: add support of some new PEAK-System PCI cards") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Zheyu Ma <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-17can: m_can: fix iomap_read_fifo() and iomap_write_fifo()Aswath Govindraju1-2/+12
The read and writes from the fifo are from a buffer, with various fields and data at predefined offsets. So, they should not be done to the same address(or port) in case of val_count greater than 1. Therefore, fix this by using iowrite32()/ioread32() instead of ioread32_rep()/iowrite32_rep(). Also, the write into FIFO must be performed with an offset from the message ram base address. Therefore, fix the base address to mram_base. Fixes: e39381770ec9 ("can: m_can: Disable IRQs on FIFO bus errors") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Aswath Govindraju <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-17can: rcar_can: fix suspend/resumeYoshihiro Shimoda1-8/+12
If the driver was not opened, rcar_can_suspend() should not call clk_disable() because the clock was not enabled. Fixes: fd1159318e55 ("can: add Renesas R-Car CAN driver") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Yoshihiro Shimoda <[email protected]> Tested-by: Ayumi Nakamichi <[email protected]> Reviewed-by: Ulrich Hecht <[email protected]> Tested-by: Biju Das <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-17can: isotp: isotp_sendmsg(): fix TX buffer concurrent access in isotp_sendmsg()Ziyang Xuan1-15/+31
When isotp_sendmsg() concurrent, tx.state of all TX processes can be ISOTP_IDLE. The conditions so->tx.state != ISOTP_IDLE and wq_has_sleeper(&so->wait) can not protect TX buffer from being accessed by multiple TX processes. We can use cmpxchg() to try to modify tx.state to ISOTP_SENDING firstly. If the modification of the previous process succeed, the later process must wait tx.state to ISOTP_IDLE firstly. Thus, we can ensure TX buffer is accessed by only one process at the same time. And we should also restore the original tx.state at the subsequent error processes. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/c2517874fbdf4188585cf9ddf67a8fa74d5dbde5.1633764159.git.william.xuanziyang@huawei.com Cc: [email protected] Signed-off-by: Ziyang Xuan <[email protected]> Acked-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-17can: isotp: isotp_sendmsg(): add result check for wait_event_interruptible()Ziyang Xuan1-1/+3
Using wait_event_interruptible() to wait for complete transmission, but do not check the result of wait_event_interruptible() which can be interrupted. It will result in TX buffer has multiple accessors and the later process interferes with the previous process. Following is one of the problems reported by syzbot. ============================================================= WARNING: CPU: 0 PID: 0 at net/can/isotp.c:840 isotp_tx_timer_handler+0x2e0/0x4c0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.13.0-rc7+ #68 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:isotp_tx_timer_handler+0x2e0/0x4c0 Call Trace: <IRQ> ? isotp_setsockopt+0x390/0x390 __hrtimer_run_queues+0xb8/0x610 hrtimer_run_softirq+0x91/0xd0 ? rcu_read_lock_sched_held+0x4d/0x80 __do_softirq+0xe8/0x553 irq_exit_rcu+0xf8/0x100 sysvec_apic_timer_interrupt+0x9e/0xc0 </IRQ> asm_sysvec_apic_timer_interrupt+0x12/0x20 Add result check for wait_event_interruptible() in isotp_sendmsg() to avoid multiple accessers for tx buffer. Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/10ca695732c9dd267c76a3c30f37aefe1ff7e32f.1633764159.git.william.xuanziyang@huawei.com Cc: [email protected] Reported-by: [email protected] Signed-off-by: Ziyang Xuan <[email protected]> Acked-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-17can: j1939: j1939_xtp_rx_rts_session_new(): abort TP less than 9 bytesZhang Changzhong2-0/+3
The receiver should abort TP if 'total message size' in TP.CM_RTS and TP.CM_BAM is less than 9 or greater than 1785 [1], but currently the j1939 stack only checks the upper bound and the receiver will accept the following broadcast message: vcan1 18ECFF00 [8] 20 08 00 02 FF 00 23 01 vcan1 18EBFF00 [8] 01 00 00 00 00 00 00 00 vcan1 18EBFF00 [8] 02 00 FF FF FF FF FF FF This patch adds check for the lower bound and abort illegal TP. [1] SAE-J1939-82 A.3.4 Row 2 and A.3.6 Row 6. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Zhang Changzhong <[email protected]> Acked-by: Oleksij Rempel <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-10-17can: j1939: j1939_xtp_rx_dat_one(): cancel session if receive TP.DT with ↵Zhang Changzhong1-2/+5
error length According to SAE-J1939-21, the data length of TP.DT must be 8 bytes, so cancel session when receive unexpected TP.DT message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/all/[email protected] Cc: [email protected] Signed-off-by: Zhang Changzhong <[email protected]> Acked-by: Oleksij Rempel <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.