| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
'rmmod pmt_telemetry' panics with:
BUG: kernel NULL pointer dereference, address: 0000000000000040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 1697 Comm: rmmod Tainted: G S W -------- --- 5.18.0-rc4 #3
Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.3056.B00.2201310233 01/31/2022
RIP: 0010:device_del+0x1b/0x3d0
Code: e8 1a d9 e9 ff e9 58 ff ff ff 48 8b 08 eb dc 0f 1f 44 00 00 41 56 41 55 41 54 55 48 8d af 80 00 00 00 53 48 89 fb 48 83 ec 18 <4c> 8b 67 40 48 89 ef 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31
RSP: 0018:ffffb520415cfd60 EFLAGS: 00010286
RAX: 0000000000000070 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000080 R08: ffffffffffffffff R09: ffffb520415cfd78
R10: 0000000000000002 R11: ffffb520415cfd78 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f7e198e5740(0000) GS:ffff905c9f700000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000040 CR3: 000000010782a005 CR4: 0000000000770ee0
PKRU: 55555554
Call Trace:
<TASK>
? __xa_erase+0x53/0xb0
device_unregister+0x13/0x50
intel_pmt_dev_destroy+0x34/0x60 [pmt_class]
pmt_telem_remove+0x40/0x50 [pmt_telemetry]
auxiliary_bus_remove+0x18/0x30
device_release_driver_internal+0xc1/0x150
driver_detach+0x44/0x90
bus_remove_driver+0x74/0xd0
auxiliary_driver_unregister+0x12/0x20
pmt_telem_exit+0xc/0xe4a [pmt_telemetry]
__x64_sys_delete_module+0x13a/0x250
? syscall_trace_enter.isra.19+0x11e/0x1a0
do_syscall_64+0x58/0x80
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x67/0x80
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x67/0x80
? exc_page_fault+0x64/0x140
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7e1803a05b
Code: 73 01 c3 48 8b 0d 2d 4e 38 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fd 4d 38 00 f7 d8 64 89 01 48
The probe function, pmt_telem_probe(), adds an entry for devices even if
they have not been initialized. This results in the array of initialized
devices containing both initialized and uninitialized entries. This
causes a panic in the remove function, pmt_telem_remove() which expects
the array to only contain initialized entries.
Only use an entry when a device is initialized.
Cc: "David E. Box" <[email protected]>
Cc: Hans de Goede <[email protected]>
Cc: Mark Gross <[email protected]>
Cc: [email protected]
Signed-off-by: David Arcari <[email protected]>
Signed-off-by: Prarit Bhargava <[email protected]>
Reviewed-by: David E. Box <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
There was an issue with the dual fan probe whereby the probe was
failing as it assuming that second_fan support was not available.
Corrected the logic so the probe works correctly. Cleaned up so
quirks only used if 2nd fan not detected.
Tested on X1 Carbon 10 (2 fans), X1 Carbon 9 (2 fans) and T490 (1 fan)
Signed-off-by: Mark Pearson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Lenovo laptops that contain NVME SSDs across a variety of generations have
trouble resuming from suspend to idle when the IOMMU translation layer is
active for the NVME storage device.
This generally manifests as a large resume delay or page faults. These
delays and page faults occur as a result of a Lenovo BIOS specific SMI
that runs during the D3->D0 transition on NVME devices.
This SMI occurs because of a flag that is set during resume by Lenovo
firmware:
```
OperationRegion (PM80, SystemMemory, 0xFED80380, 0x10)
Field (PM80, AnyAcc, NoLock, Preserve)
{
SI3R, 1
}
Method (_ON, 0, NotSerialized) // _ON_: Power On
{
TPST (0x60D0)
If ((DAS3 == 0x00))
{
If (SI3R)
{
TPST (0x60E0)
M020 (NBRI, 0x00, 0x00, 0x04, (NCMD | 0x06))
M020 (NBRI, 0x00, 0x00, 0x10, NBAR)
APMC = HDSI /* \HDSI */
SLPS = 0x01
SI3R = 0x00
TPST (0x60E1)
}
D0NV = 0x01
}
}
```
Create a quirk that will run early in the resume process to prevent this
SMI from running. As any of these machines are fixed, they can be peeled
back from this quirk or narrowed down to individual firmware versions.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1910
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1689
Signed-off-by: Mario Limonciello <[email protected]>
Tested-by: Mark Pearson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
DMI matching in thinkpad_acpi happens local to a function meaning
quirks can only match that function.
Future changes to thinkpad_acpi may need to quirk other code, so
change this to use a quirk infrastructure.
Signed-off-by: Mario Limonciello <[email protected]>
Tested-by: Mark Pearson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
|
|
Add Darren Hart as Ampere Computing's ambassador for the embargoed
hardware issues process.
Signed-off-by: Darren Hart <[email protected]>
Link: https://lore.kernel.org/r/2e36a8e925bc958928b4afa189b2f876c392831b.1650995848.git.darren@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The list appears to be grouped by type (silicon, software, cloud) and
mostly alphabetical within each group, with a few exceptions.
Before adding to it, cleanup the list to be alphabetical within the
groups, and use tabs consistently throughout the list.
Signed-off-by: Darren Hart <[email protected]>
Link: https://lore.kernel.org/r/ec574b5d55584a3adda9bd31b7695193636ff136.1650995848.git.darren@os.amperecomputing.com
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Device drivers may decide to not load firmware when probed to avoid
slowing down the boot process should the firmware filesystem not be
available yet. In this case, the firmware loading request may be done
when a device file associated with the driver is first accessed. The
credentials of the userspace process accessing the device file may be
used to validate access to the firmware files requested by the driver.
Ensure that the kernel assumes the responsibility of reading the
firmware.
This was observed on Android for a graphic driver loading their firmware
when the device file (e.g. /dev/mali0) was first opened by userspace
(i.e. surfaceflinger). The security context of surfaceflinger was used
to validate the access to the firmware file (e.g.
/vendor/firmware/mali.bin).
Previously, Android configurations were not setting up the
firmware_class.path command line argument and were relying on the
userspace fallback mechanism. In this case, the security context of the
userspace daemon (i.e. ueventd) was consistently used to read firmware
files. More Android devices are now found to set firmware_class.path
which gives the kernel the opportunity to read the firmware directly
(via kernel_read_file_from_path_initns). In this scenario, the current
process credentials were used, even if unrelated to the loading of the
firmware file.
Signed-off-by: Thiébaud Weksteen <[email protected]>
Cc: <[email protected]> # 5.10
Reviewed-by: Paul Moore <[email protected]>
Acked-by: Luis Chamberlain <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The driver is calling framebuffer_release() in its .remove callback, but
this will cause the struct fb_info to be freed too early. Since it could
be that a reference is still hold to it if user-space opened the fbdev.
This would lead to a use-after-free error if the framebuffer device was
unregistered but later a user-space process tries to close the fbdev fd.
To prevent this, move the framebuffer_release() call to fb_ops.fb_destroy
instead of doing it in the driver's .remove callback.
Strictly speaking, the code flow in the driver is still wrong because all
the hardware cleanupd (i.e: iounmap) should be done in .remove while the
software cleanup (i.e: releasing the framebuffer) should be done in the
.fb_destroy handler. But this at least makes to match the behavior before
commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal").
Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal")
Suggested-by: Daniel Vetter <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Most fbdev drivers have issues with the fb_info lifetime, because call to
framebuffer_release() from their driver's .remove callback, rather than
doing from fbops.fb_destroy callback.
Doing that will destroy the fb_info too early, while references to it may
still exist, leading to a use-after-free error.
To prevent this, check the fb_info reference counter when attempting to
kfree the data structure in framebuffer_release(). That will leak it but
at least will prevent the mentioned error.
Signed-off-by: Daniel Vetter <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This reverts commit aafa025c76dcc7d1a8c8f0bdefcbe4eb480b2f6a. That commit
attempted to fix a NULL pointer dereference, caused by the struct fb_info
associated with a framebuffer device to not longer be valid when the file
descriptor was closed.
The issue was exposed by commit 27599aacbaef ("fbdev: Hot-unplug firmware
fb devices on forced removal"), which added a new path that goes through
the struct device removal instead of directly unregistering the fb.
Most fbdev drivers have issues with the fb_info lifetime, because call to
framebuffer_release() from their driver's .remove callback, rather than
doing from fbops.fb_destroy callback. This meant that due to this switch,
the fb_info was now destroyed too early, while references still existed,
while before it was simply leaked.
The patch we're reverting here reinstated that leak, hence "fixed" the
regression. But the proper solution is to fix the drivers to not release
the fb_info too soon.
Suggested-by: Daniel Vetter <[email protected]>
Signed-off-by: Javier Martinez Canillas <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
With CONFIG_FORTIFY_SOURCE enabled, string functions will also perform
dynamic checks for string size which can panic the kernel, like incase
of overflow detection.
In papr_scm, papr_scm_pmu_check_events function uses stat->stat_id with
string operations, to populate the nvdimm_events_map array. Since
stat_id variable is not NULL terminated, the kernel panics with
CONFIG_FORTIFY_SOURCE enabled at boot time.
Below are the logs of kernel panic:
detected buffer overflow in __fortify_strlen
------------[ cut here ]------------
kernel BUG at lib/string_helpers.c:980!
Oops: Exception in kernel mode, sig: 5 [#1]
NIP [c00000000077dad0] fortify_panic+0x28/0x38
LR [c00000000077dacc] fortify_panic+0x24/0x38
Call Trace:
[c0000022d77836e0] [c00000000077dacc] fortify_panic+0x24/0x38 (unreliable)
[c00800000deb2660] papr_scm_pmu_check_events.constprop.0+0x118/0x220 [papr_scm]
[c00800000deb2cb0] papr_scm_probe+0x288/0x62c [papr_scm]
[c0000000009b46a8] platform_probe+0x98/0x150
Fix this issue by using kmemdup_nul() to copy the content of
stat->stat_id directly to the nvdimm_events_map array.
mpe: stat->stat_id comes from the hypervisor, not userspace, so there is
no security exposure.
Fixes: 4c08d4bbc089 ("powerpc/papr_scm: Add perf interface support")
Signed-off-by: Kajol Jain <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Vladimir Oltean says:
====================
Ocelot VCAP fixes
Changes in v2:
fix the NPDs and UAFs caused by filter->trap_list in a more robust way
that actually does not introduce bugs of its own (1/5)
This series fixes issues found while running
tools/testing/selftests/net/forwarding/tc_actions.sh on the ocelot
switch:
- NULL pointer dereference when failing to offload a filter
- NULL pointer dereference after deleting a trap
- filters still having effect after being deleted
- dropped packets still being seen by software
- statistics counters showing double the amount of hits
- statistics counters showing inexistent hits
- invalid configurations not rejected
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Given the following order of operations:
(1) we add filter A using tc-flower
(2) we send a packet that matches it
(3) we read the filter's statistics to find a hit count of 1
(4) we add a second filter B with a higher preference than A, and A
moves one position to the right to make room in the TCAM for it
(5) we send another packet, and this matches the second filter B
(6) we read the filter statistics again.
When this happens, the hit count of filter A is 2 and of filter B is 1,
despite a single packet having matched each filter.
Furthermore, in an alternate history, reading the filter stats a second
time between steps (3) and (4) makes the hit count of filter A remain at
1 after step (6), as expected.
The reason why this happens has to do with the filter->stats.pkts field,
which is written to hardware through the call path below:
vcap_entry_set
/ | \
/ | \
/ | \
/ | \
es0_entry_set is1_entry_set is2_entry_set
\ | /
\ | /
\ | /
vcap_data_set(data.counter, ...)
The primary role of filter->stats.pkts is to transport the filter hit
counters from the last readout all the way from vcap_entry_get() ->
ocelot_vcap_filter_stats_update() -> ocelot_cls_flower_stats().
The reason why vcap_entry_set() writes it to hardware is so that the
counters (saturating and having a limited bit width) are cleared
after each user space readout.
The writing of filter->stats.pkts to hardware during the TCAM entry
movement procedure is an unintentional consequence of the code design,
because the hit count isn't up to date at this point.
So at step (4), when filter A is moved by ocelot_vcap_filter_add() to
make room for filter B, the hardware hit count is 0 (no packet matched
on it in the meantime), but filter->stats.pkts is 1, because the last
readout saw the earlier packet. The movement procedure programs the old
hit count back to hardware, so this creates the impression to user space
that more packets have been matched than they really were.
The bug can be seen when running the gact_drop_and_ok_test() from the
tc_actions.sh selftest.
Fix the issue by reading back the hit count to tmp->stats.pkts before
migrating the VCAP filter. Sure, this is a best-effort technique, since
the packets that hit the rule between vcap_entry_get() and
vcap_entry_set() won't be counted, but at least it allows the counters
to be reliably used for selftests where the traffic is under control.
The vcap_entry_get() name is a bit unintuitive, but it only reads back
the counter portion of the TCAM entry, not the entire entry.
The index from which we retrieve the counter is also a bit unintuitive
(i - 1 during add, i + 1 during del), but this is the way in which TCAM
entry movement works. The "entry index" isn't a stored integer for a
TCAM filter, instead it is dynamically computed by
ocelot_vcap_block_get_filter_index() based on the entry's position in
the &block->rules list. That position (as well as block->count) is
automatically updated by ocelot_vcap_filter_add_to_block() on add, and
by ocelot_vcap_block_remove_filter() on del. So "i" is the new filter
index, and "i - 1" or "i + 1" respectively are the old addresses of that
TCAM entry (we only support installing/deleting one filter at a time).
Fixes: b596229448dd ("net: mscc: ocelot: Add support for tcam")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Once the CPU port was added to the destination port mask of a packet, it
can never be cleared, so even packets marked as dropped by the MASK_MODE
of a VCAP IS2 filter will still reach it. This is why we need the
OCELOT_POLICER_DISCARD to "kill dropped packets dead" and make software
stop seeing them.
We disallow policer rules from being put on any other chain than the one
for the first lookup, but we don't do this for "drop" rules, although we
should. This change is merely ascertaining that the rules dont't
(completely) work and letting the user know.
The blamed commit is the one that introduced the multi-chain architecture
in ocelot. Prior to that, we should have always offloaded the filters to
VCAP IS2 lookup 0, where they did work.
Fixes: 1397a2eb52e2 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The VCAP IS2 TCAM is looked up twice per packet, and each filter can be
configured to only match during the first, second lookup, or both, or
none.
The blamed commit wrote the code for making VCAP IS2 filters match only
on the given lookup. But right below that code, there was another line
that explicitly made the lookup a "don't care", and this is overwriting
the lookup we've selected. So the code had no effect.
Some of the more noticeable effects of having filters match on both
lookups:
- in "tc -s filter show dev swp0 ingress", we see each packet matching a
VCAP IS2 filter counted twice. This throws off scripts such as
tools/testing/selftests/net/forwarding/tc_actions.sh and makes them
fail.
- a "tc-drop" action offloaded to VCAP IS2 needs a policer as well,
because once the CPU port becomes a member of the destination port
mask of a packet, nothing removes it, not even a PERMIT/DENY mask mode
with a port mask of 0. But VCAP IS2 rules with the POLICE_ENA bit in
the action vector can only appear in the first lookup. What happens
when a filter matches both lookups is that the action vector is
combined, and this makes the POLICE_ENA bit ineffective, since the
last lookup in which it has appeared is the second one. In other
words, "tc-drop" actions do not drop packets for the CPU port, dropped
packets are still seen by software unless there was an FDB entry that
directed those packets to some other place different from the CPU.
The last bit used to work, because in the initial commit b596229448dd
("net: mscc: ocelot: Add support for tcam"), we were writing the FIRST
field of the VCAP IS2 half key with a 1, not with a "don't care".
The change to "don't care" was made inadvertently by me in commit
c1c3993edb7c ("net: mscc: ocelot: generalize existing code for VCAP"),
which I just realized, and which needs a separate fix from this one,
for "stable" kernels that lack the commit blamed below.
Fixes: 226e9cd82a96 ("net: mscc: ocelot: only install TCAM entries into a specific lookup and PAG")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
deleted
ocelot_vcap_filter_del() works by moving the next filters over the
current one, and then deleting the last filter by calling vcap_entry_set()
with a del_filter which was specially created by memsetting its memory
to zeroes. vcap_entry_set() then programs this to the TCAM and action
RAM via the cache registers.
The problem is that vcap_entry_set() is a dispatch function which looks
at del_filter->block_id. But since del_filter is zeroized memory, the
block_id is 0, or otherwise said, VCAP_ES0. So practically, what we do
is delete the entry at the same TCAM index from VCAP ES0 instead of IS1
or IS2.
The code was not always like this. vcap_entry_set() used to simply be
is2_entry_set(), and then, the logic used to work.
Restore the functionality by populating the block_id of the del_filter
based on the VCAP block of the filter that we're deleting. This makes
vcap_entry_set() know what to do.
Fixes: 1397a2eb52e2 ("net: mscc: ocelot: create TCAM skeleton from tc filter chains")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since the blamed commit, VCAP filters can appear on more than one list.
If their action is "trap", they are chained on ocelot->traps via
filter->trap_list. This is in addition to their normal placement on the
VCAP block->rules list head.
Therefore, when we free a VCAP filter, we must remove it from all lists
it is a member of, including ocelot->traps.
There are at least 2 bugs which are direct consequences of this design
decision.
First is the incorrect usage of list_empty(), meant to denote whether
"filter" is chained into ocelot->traps via filter->trap_list.
This does not do the correct thing, because list_empty() checks whether
"head->next == head", but in our case, head->next == head->prev == NULL.
So we dereference NULL pointers and die when we call list_del().
Second is the fact that not all places that should remove the filter
from ocelot->traps do so. One example is ocelot_vcap_block_remove_filter(),
which is where we have the main kfree(filter). By keeping freed filters
in ocelot->traps we end up in a use-after-free in
felix_update_trapping_destinations().
Attempting to fix all the buggy patterns is a whack-a-mole game which
makes the driver unmaintainable. Actually this is what the previous
patch version attempted to do:
https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/
but it introduced another set of bugs, because there are other places in
which create VCAP filters, not just ocelot_vcap_filter_create():
- ocelot_trap_add()
- felix_tag_8021q_vlan_add_rx()
- felix_tag_8021q_vlan_add_tx()
Relying on the convention that all those code paths must call
INIT_LIST_HEAD(&filter->trap_list) is not going to scale.
So let's do what should have been done in the first place and keep a
bool in struct ocelot_vcap_filter which denotes whether we are looking
at a trapping rule or not. Iterating now happens over the main VCAP IS2
block->rules. The advantage is that we no longer risk having stale
references to a freed filter, since it is only present in that list.
Fixes: e42bd4ed09aa ("net: mscc: ocelot: keep traps in a list")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use kzalloc rather than duplicating its implementation, which
makes code simple and easy to understand.
Signed-off-by: Haowen Bai <[email protected]>
Reviewed-by: Sven Schnelle <[email protected]>
Signed-off-by: Stefan Haberland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Read requests that return with NRF error are partially completed in
dasd_eckd_ese_read(). The function keeps track of the amount of
processed bytes and the driver will eventually return this information
back to the block layer for further processing via __dasd_cleanup_cqr()
when the request is in the final stage of processing (from the driver's
perspective).
For this, blk_update_request() is used which requires the number of
bytes to complete the request. As per documentation the nr_bytes
parameter is described as follows:
"number of bytes to complete for @req".
This was mistakenly interpreted as "number of bytes _left_ for @req"
leading to new requests with incorrect data length. The consequence are
inconsistent and completely wrong read requests as data from random
memory areas are read back.
Fix this by correctly specifying the amount of bytes that should be used
to complete the request.
Fixes: 5e6bdd37c552 ("s390/dasd: fix data corruption for thin provisioned devices")
Cc: [email protected] # 5.3+
Signed-off-by: Jan Höppner <[email protected]>
Reviewed-by: Stefan Haberland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
When reading unformatted tracks on ESE devices, the corresponding memory
areas are simply set to zero for each segment. This is done incorrectly
for blocksizes < 4096.
There are two problems. First, the increment of dst is done using the
counter of the loop (off), which is increased by blksize every
iteration. This leads to a much bigger increment for dst as actually
intended. Second, the increment of dst is done before the memory area
is set to 0, skipping a significant amount of bytes of memory.
This leads to illegal overwriting of memory and ultimately to a kernel
panic.
This is not a problem with 4k blocksize because
blk_queue_max_segment_size is set to PAGE_SIZE, always resulting in a
single iteration for the inner segment loop (bv.bv_len == blksize). The
incorrectly used 'off' value to increment dst is 0 and the correct
memory area is used.
In order to fix this for blksize < 4k, increment dst correctly using the
blksize and only do it at the end of the loop.
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: [email protected] # v5.3+
Signed-off-by: Jan Höppner <[email protected]>
Reviewed-by: Stefan Haberland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
For ESE devices we get an error for write operations on an unformatted
track. Afterwards the track will be formatted and the IO operation
restarted.
When using alias devices a track might be accessed by multiple requests
simultaneously and there is a race window that a track gets formatted
twice resulting in data loss.
Prevent this by remembering the amount of formatted tracks when starting
a request and comparing this number before actually formatting a track
on the fly. If the number has changed there is a chance that the current
track was finally formatted in between. As a result do not format the
track and restart the current IO to check.
The number of formatted tracks does not match the overall number of
formatted tracks on the device and it might wrap around but this is no
problem. It is only needed to recognize that a track has been formatted at
all in between.
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: [email protected] # 5.3+
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
For ESE devices we get an error when accessing an unformatted track.
The handling of this error will return zero data for read requests and
format the track on demand before writing to it. To do this the code needs
to distinguish between read and write requests. This is done with data from
the blocklayer request. A pointer to the blocklayer request is stored in
the CQR.
If there is an error on the device an ERP request is built to do error
recovery. While the ERP request is mostly a copy of the original CQR the
pointer to the blocklayer request is not copied to not accidentally pass
it back to the blocklayer without cleanup.
This leads to the error that during ESE handling after an ERP request was
built it is not possible to determine the IO direction. This leads to the
formatting of a track for read requests which might in turn lead to data
corruption.
Fixes: 5e2b17e712cf ("s390/dasd: Add dynamic formatting support for ESE volumes")
Cc: [email protected] # 5.3+
Signed-off-by: Stefan Haberland <[email protected]>
Reviewed-by: Jan Hoeppner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The bonding entry did not include additional include files that have
been added nor did it reference the documentation. Add these references
for completeness.
Signed-off-by: Jonathan Toppins <[email protected]>
Link: https://lore.kernel.org/r/903ed2906b93628b38a2015664a20d2802042863.1651690748.git.jtoppins@redhat.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The find_next_netdev_feature() macro gets the "remaining length",
not bit index.
Passing "bit - 1" for the following iteration is wrong as it skips
the adjacent bit. Pass "bit" instead.
Fixes: 3b89ea9c5902 ("net: Fix for_each_netdev_feature on Big endian")
Signed-off-by: Tariq Toukan <[email protected]>
Reviewed-by: Gal Pressman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-fixes
single lockdep fix.
Signed-off-by: Dave Airlie <[email protected]>
From: Rob Clark <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkzqzxDLp82OaKXVrWd7nWZtkxKsuOK1wOGCDz7qF-dA@mail.gmail.com
|
|
Nicolas Dichtel says:
====================
vrf: fix address binding with icmp socket
The first patch fixes the issue.
The second patch adds related tests in selftests.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.
Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
instead of an IP raw socket. In this case, 'ping' is unable to bind its
socket to a local address owned by a vrflite.
Before the patch:
$ sysctl -w net.ipv4.ping_group_range='0 2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address
CC: [email protected]
Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction")
Signed-off-by: Nicolas Dichtel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.18-rc6:
- Small fix for hot-unplugging fb devices.
- Kconfig fix for it6505.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since commit f1131b9c23fb ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the kszphy_suspend/
resume hooks are used.
These functions require the probe function to be called so that
priv can be allocated.
Otherwise, a NULL pointer dereference happens inside
kszphy_config_reset().
Cc: [email protected]
Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Reported-by: Andrew Lunn <[email protected]>
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since commit f1131b9c23fb ("net: phy: micrel: use
kszphy_suspend()/kszphy_resume for irq aware devices") the following
NULL pointer dereference is observed on a board with KSZ8061:
# udhcpc -i eth0
udhcpc: started, v1.35.0
8<--- cut here ---
Unable to handle kernel NULL pointer dereference at virtual address 00000008
pgd = f73cef4e
[00000008] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 196 Comm: ifconfig Not tainted 5.15.37-dirty #94
Hardware name: Freescale i.MX6 SoloX (Device Tree)
PC is at kszphy_config_reset+0x10/0x114
LR is at kszphy_resume+0x24/0x64
...
The KSZ8061 phy_driver structure does not have the .probe/..driver_data
fields, which means that priv is not allocated.
This causes the NULL pointer dereference inside kszphy_config_reset().
Fix the problem by using the generic suspend/resume functions as before.
Another alternative would be to provide the .probe and .driver_data
information into the structure, but to be on the safe side, let's
just restore Ethernet functionality by using the generic suspend/resume.
Cc: [email protected]
Fixes: f1131b9c23fb ("net: phy: micrel: use kszphy_suspend()/kszphy_resume for irq aware devices")
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.18-2022-05-04:
amdgpu:
- Fix a xen dom0 regression on APUs
- Fix a potential array overflow if a receiver were to
send an erroneous audio channel count
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Pull folio fixes from Matthew Wilcox:
"Two folio fixes for 5.18.
Darrick and Brian have done amazing work debugging the race I created
in the folio BIO iterator. The readahead problem was deterministic, so
easy to fix.
- Fix a race when we were calling folio_next() in the BIO folio iter
without holding a reference, meaning the folio could be split or
freed, and we'd jump to the next page instead of the intended next
folio.
- Fix readahead creating single-page folios instead of the intended
large folios when doing reads that are not a power of two in size"
* tag 'folio-5.18f' of git://git.infradead.org/users/willy/pagecache:
mm/readahead: Fix readahead with large folios
block: Do not call folio_next() on an unreferenced folio
|
|
Eric Dumazet is reporting addition on 0 problem at rds_tcp_tune(), for
delayed works queued in rds_wq might be invoked after a net namespace's
refcount already reached 0.
Since rds_tcp_exit_net() from cleanup_net() calls flush_workqueue(rds_wq),
it is guaranteed that we can instead use maybe_get_net() from delayed work
functions until rds_tcp_exit_net() returns.
Note that I'm not convinced that all works which might access a net
namespace are already queued in rds_wq by the moment rds_tcp_exit_net()
calls flush_workqueue(rds_wq). If some race is there, rds_tcp_exit_net()
will fail to wait for work functions, and kmem_cache_free() could be
called from net_free() before maybe_get_net() is called from
rds_tcp_tune().
Reported-by: Eric Dumazet <[email protected]>
Fixes: 3a58f13a881ed351 ("net: rds: acquire refcount on TCP sockets")
Signed-off-by: Tetsuo Handa <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Drop unused 'max-link-speed' in Apple PCIe
- More redundant 'maxItems/minItems' schema fixes
- Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'
- Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding
- Add missing 'power-domains' property to Cadence UFSHC
* tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pci: apple,pcie: Drop max-link-speed from example
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
dt-bindings: ufs: cdns,ufshc: Add power-domains
|
|
If an irq is pending when devm_request_irq() is called, the irq
handler will cause a NULL pointer access because initialisation
is not done yet.
Fixes: 9d7ee0e28da59 ("tty: serial: lpuart: avoid report NULL interrupt")
Cc: stable <[email protected]>
Signed-off-by: Indan Zupancic <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
gsmtty_write() does not prevent the user to use the full fifo size of 4096
bytes as allocated in gsm_dlci_alloc(). However, gsmtty_write_room() tries
to limit the return value by 'TX_SIZE' and returns a negative value if the
fifo has more than 'TX_SIZE' bytes stored. This is obviously wrong as
'TX_SIZE' is defined as 512.
Define 'TX_SIZE' to the fifo size and use it accordingly for allocation to
keep the current behavior. Return the correct remaining size of the fifo in
gsmtty_write_room() via kfifo_avail().
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: [email protected]
Signed-off-by: Daniel Starke <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The current implementation activates the mux if it was restarted and opens
the control channel if the mux was previously closed and we are now acting
as initiator instead of responder, which is the default setting.
This has two issues.
1) No mux is activated if we keep all default values and only switch to
initiator. The control channel is not allocated but will be opened next
which results in a NULL pointer dereference.
2) Switching the configuration after it was once configured while keeping
the initiator value the same will not reopen the control channel if it was
closed due to parameter incompatibilities. The mux remains dead.
Fix 1) by always activating the mux if it is dead after configuration.
Fix 2) by always opening the control channel after mux activation.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: [email protected]
Signed-off-by: Daniel Starke <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
'len' is decreased after each octet that has its EA bit set to 0, which
means that the value is encoded with additional octets. However, the final
octet does not decreases 'len' which results in 'len' being one byte too
long. A buffer over-read may occur in tty_insert_flip_string() as it tries
to read one byte more than the passed content size of 'data'.
Decrease 'len' also for the final octet which has the EA bit set to 1 to
write the correct number of bytes from the internal receive buffer to the
virtual tty.
Fixes: 2e124b4a390c ("TTY: switch tty_flip_buffer_push")
Cc: [email protected]
Signed-off-by: Daniel Starke <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The XON1/XOFF1 character registers are at offset 0xa0 and 0xa8
respectively, so we cannot use the definition in serial_port.h.
Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Set the FEATURE_SEL at probe time to make sure that BIT(0) is enabled:
this guarantees that when the port is configured as AP UART, the
right register layout is interpreted by the UART IP.
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
On MediaTek SoCs, the UART IP is 16550A compatible, but there are some
specific quirks: we are declaring a register shift of 2, but this is
only valid for the majority of the registers, as there are some that
are out of the standard layout.
Specifically, this driver is using definitions from serial_reg.h, where
we have a UART_EFR register defined as 2: this results in a 0x8 offset,
but there we have the FCR register instead.
The right offset for the EFR register on MediaTek UART is at 0x98,
so, following the decimal definition convention in serial_reg.h and
accounting for the register left shift of two, add and use the correct
register address for this IP, defined as decimal 38, so that the final
calculation results in (0x26 << 2) = 0x98.
Fixes: bdbd0a7f8f03 ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.
Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART")
Signed-off-by: Yang Yingliang <[email protected]>
Reviewed-by: Baruch Siach <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Several types of kernel panics can occur due to timing during the uvc
gadget removal. This appears to be a problem with gadget resources being
managed by both the client application's v4l2 open/close and the UDC
gadget bind/unbind. Since the concept of USB_GADGET_DELAYED_STATUS
doesn't exist for unbind, add a wait to allow for the application to
close out.
Some examples of the panics that can occur are:
<1>[ 1147.652313] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000028
<4>[ 1147.652510] Call trace:
<4>[ 1147.652514] usb_gadget_disconnect+0x74/0x1f0
<4>[ 1147.652516] usb_gadget_deactivate+0x38/0x168
<4>[ 1147.652520] usb_function_deactivate+0x54/0x90
<4>[ 1147.652524] uvc_function_disconnect+0x14/0x38
<4>[ 1147.652527] uvc_v4l2_release+0x34/0xa0
<4>[ 1147.652537] __fput+0xdc/0x2c0
<4>[ 1147.652540] ____fput+0x10/0x1c
<4>[ 1147.652545] task_work_run+0xe4/0x12c
<4>[ 1147.652549] do_notify_resume+0x108/0x168
<1>[ 282.950561][ T1472] Unable to handle kernel NULL pointer
dereference at virtual address 00000000000005b8
<6>[ 282.953111][ T1472] Call trace:
<6>[ 282.953121][ T1472] usb_function_deactivate+0x54/0xd4
<6>[ 282.953134][ T1472] uvc_v4l2_release+0xac/0x1e4
<6>[ 282.953145][ T1472] v4l2_release+0x134/0x1f0
<6>[ 282.953167][ T1472] __fput+0xf4/0x428
<6>[ 282.953178][ T1472] ____fput+0x14/0x24
<6>[ 282.953193][ T1472] task_work_run+0xac/0x130
<3>[ 213.410077][ T29] configfs-gadget gadget: uvc: Failed to queue
request (-108).
<1>[ 213.410116][ T29] Unable to handle kernel NULL pointer
dereference at virtual address 0000000000000003
<6>[ 213.413460][ T29] Call trace:
<6>[ 213.413474][ T29] uvcg_video_pump+0x1f0/0x384
<6>[ 213.413489][ T29] process_one_work+0x2a4/0x544
<6>[ 213.413502][ T29] worker_thread+0x350/0x784
<6>[ 213.413515][ T29] kthread+0x2ac/0x320
<6>[ 213.413528][ T29] ret_from_fork+0x10/0x30
Signed-off-by: Dan Vacura <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Returning an error value in an i2c remove callback results in an error
message being emitted by the i2c core, but otherwise it doesn't make a
difference. The device goes away anyhow and the devm cleanups are
called.
In this case the remove callback even returns early without stopping the
tcpm worker thread and various timers. A work scheduled on the work
queue, or a firing timer after tcpci_remove() returned probably results
in a use-after-free situation because the regmap and driver data were
freed. So better make sure that tcpci_unregister_port() is called even
if disabling the irq failed.
Also emit a more specific error message instead of the i2c core's
"remove failed (EIO), will be ignored" and return 0 to suppress the
core's warning.
This patch is (also) a preparation for making i2c remove callbacks
return void.
Fixes: 3ba76256fc4e ("usb: typec: tcpci: mask event interrupts when remove driver")
Signed-off-by: Uwe Kleine-König <[email protected]>
Cc: stable <[email protected]>
Acked-by: Heikki Krogerus <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.
So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.
This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.
Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.
Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.
Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <[email protected]>
Cc: stable <[email protected]>
Acked-by: Oliver Neukum <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The new state allowing device addition with paused balance is not
exported to user space so it can't recognize it and actually start the
operation.
Fixes: efc0e69c2fea ("btrfs: introduce exclusive operation BALANCE_PAUSED state")
CC: [email protected] # 5.17
Signed-off-by: David Sterba <[email protected]>
|
|
When inserting a key range item (BTRFS_DIR_LOG_INDEX_KEY) while logging
a directory, we don't expect the insertion to fail with -EEXIST, because
we are holding the directory's log_mutex and we have dropped all existing
BTRFS_DIR_LOG_INDEX_KEY keys from the log tree before we started to log
the directory. However it's possible that during the logging we attempt
to insert the same BTRFS_DIR_LOG_INDEX_KEY key twice, but for this to
happen we need to race with insertions of items from other inodes in the
subvolume's tree while we are logging a directory. Here's how this can
happen:
1) We are logging a directory with inode number 1000 that has its items
spread across 3 leaves in the subvolume's tree:
leaf A - has index keys from the range 2 to 20 for example. The last
item in the leaf corresponds to a dir item for index number 20. All
these dir items were created in a past transaction.
leaf B - has index keys from the range 22 to 100 for example. It has
no keys from other inodes, all its keys are dir index keys for our
directory inode number 1000. Its first key is for the dir item with
a sequence number of 22. All these dir items were also created in a
past transaction.
leaf C - has index keys for our directory for the range 101 to 120 for
example. This leaf also has items from other inodes, and its first
item corresponds to the dir item for index number 101 for our directory
with inode number 1000;
2) When we finish processing the items from leaf A at log_dir_items(),
we log a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and a last
offset of 21, meaning the log is authoritative for the index range
from 21 to 21 (a single sequence number). At this point leaf B was
not yet modified in the current transaction;
3) When we return from log_dir_items() we have released our read lock on
leaf B, and have set *last_offset_ret to 21 (index number of the first
item on leaf B minus 1);
4) Some other task inserts an item for other inode (inode number 1001 for
example) into leaf C. That resulted in pushing some items from leaf C
into leaf B, in order to make room for the new item, so now leaf B
has dir index keys for the sequence number range from 22 to 102 and
leaf C has the dir items for the sequence number range 103 to 120;
5) At log_directory_changes() we call log_dir_items() again, passing it
a 'min_offset' / 'min_key' value of 22 (*last_offset_ret from step 3
plus 1, so 21 + 1). Then btrfs_search_forward() leaves us at slot 0
of leaf B, since leaf B was modified in the current transaction.
We have also initialized 'last_old_dentry_offset' to 20 after calling
btrfs_previous_item() at log_dir_items(), as it left us at the last
item of leaf A, which refers to the dir item with sequence number 20;
6) We then call process_dir_items_leaf() to process the dir items of
leaf B, and when we process the first item, corresponding to slot 0,
sequence number 22, we notice the dir item was created in a past
transaction and its sequence number is greater than the value of
*last_old_dentry_offset + 1 (20 + 1), so we decide to log again a
BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and an end range
of 21 (key.offset - 1 == 22 - 1 == 21), which results in an -EEXIST
error from insert_dir_log_key(), as we have already inserted that
key at step 2, triggering the assertion at process_dir_items_leaf().
The trace produced in dmesg is like the following:
assertion failed: ret != -EEXIST, in fs/btrfs/tree-log.c:3857
[198255.980839][ T7460] ------------[ cut here ]------------
[198255.981666][ T7460] kernel BUG at fs/btrfs/ctree.h:3617!
[198255.983141][ T7460] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[198255.984080][ T7460] CPU: 0 PID: 7460 Comm: repro-ghost-dir Not tainted 5.18.0-5314c78ac373-misc-next+
[198255.986027][ T7460] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[198255.988600][ T7460] RIP: 0010:assertfail.constprop.0+0x1c/0x1e
[198255.989465][ T7460] Code: 8b 4c 89 (...)
[198255.992599][ T7460] RSP: 0018:ffffc90007387188 EFLAGS: 00010282
[198255.993414][ T7460] RAX: 000000000000003d RBX: 0000000000000065 RCX: 0000000000000000
[198255.996056][ T7460] RDX: 0000000000000001 RSI: ffffffff8b62b180 RDI: fffff52000e70e24
[198255.997668][ T7460] RBP: ffffc90007387188 R08: 000000000000003d R09: ffff8881f0e16507
[198255.999199][ T7460] R10: ffffed103e1c2ca0 R11: 0000000000000001 R12: 00000000ffffffef
[198256.000683][ T7460] R13: ffff88813befc630 R14: ffff888116c16e70 R15: ffffc90007387358
[198256.007082][ T7460] FS: 00007fc7f7c24640(0000) GS:ffff8881f0c00000(0000) knlGS:0000000000000000
[198256.009939][ T7460] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[198256.014133][ T7460] CR2: 0000560bb16d0b78 CR3: 0000000140b34005 CR4: 0000000000170ef0
[198256.015239][ T7460] Call Trace:
[198256.015674][ T7460] <TASK>
[198256.016313][ T7460] log_dir_items.cold+0x16/0x2c
[198256.018858][ T7460] ? replay_one_extent+0xbf0/0xbf0
[198256.025932][ T7460] ? release_extent_buffer+0x1d2/0x270
[198256.029658][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.031114][ T7460] ? lock_acquired+0xbe/0x660
[198256.032633][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.034386][ T7460] ? lock_release+0xcf/0x8a0
[198256.036152][ T7460] log_directory_changes+0xf9/0x170
[198256.036993][ T7460] ? log_dir_items+0xba0/0xba0
[198256.037661][ T7460] ? do_raw_write_unlock+0x7d/0xe0
[198256.038680][ T7460] btrfs_log_inode+0x233b/0x26d0
[198256.041294][ T7460] ? log_directory_changes+0x170/0x170
[198256.042864][ T7460] ? btrfs_attach_transaction_barrier+0x60/0x60
[198256.045130][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.046568][ T7460] ? lock_release+0xcf/0x8a0
[198256.047504][ T7460] ? lock_downgrade+0x420/0x420
[198256.048712][ T7460] ? ilookup5_nowait+0x81/0xa0
[198256.049747][ T7460] ? lock_downgrade+0x420/0x420
[198256.050652][ T7460] ? do_raw_spin_unlock+0xa9/0x100
[198256.051618][ T7460] ? __might_resched+0x128/0x1c0
[198256.052511][ T7460] ? __might_sleep+0x66/0xc0
[198256.053442][ T7460] ? __kasan_check_read+0x11/0x20
[198256.054251][ T7460] ? iget5_locked+0xbd/0x150
[198256.054986][ T7460] ? run_delayed_iput_locked+0x110/0x110
[198256.055929][ T7460] ? btrfs_iget+0xc7/0x150
[198256.056630][ T7460] ? btrfs_orphan_cleanup+0x4a0/0x4a0
[198256.057502][ T7460] ? free_extent_buffer+0x13/0x20
[198256.058322][ T7460] btrfs_log_inode+0x2654/0x26d0
[198256.059137][ T7460] ? log_directory_changes+0x170/0x170
[198256.060020][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.060930][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.061905][ T7460] ? lock_contended+0x770/0x770
[198256.062682][ T7460] ? btrfs_log_inode_parent+0xd04/0x1750
[198256.063582][ T7460] ? lock_downgrade+0x420/0x420
[198256.064432][ T7460] ? preempt_count_sub+0x18/0xc0
[198256.065550][ T7460] ? __mutex_lock+0x580/0xdc0
[198256.066654][ T7460] ? stack_trace_save+0x94/0xc0
[198256.068008][ T7460] ? __kasan_check_write+0x14/0x20
[198256.072149][ T7460] ? __mutex_unlock_slowpath+0x12a/0x430
[198256.073145][ T7460] ? mutex_lock_io_nested+0xcd0/0xcd0
[198256.074341][ T7460] ? wait_for_completion_io_timeout+0x20/0x20
[198256.075345][ T7460] ? lock_downgrade+0x420/0x420
[198256.076142][ T7460] ? lock_contended+0x770/0x770
[198256.076939][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0
[198256.078401][ T7460] ? btrfs_sync_file+0x5e6/0xa40
[198256.080598][ T7460] btrfs_log_inode_parent+0x523/0x1750
[198256.081991][ T7460] ? wait_current_trans+0xc8/0x240
[198256.083320][ T7460] ? lock_downgrade+0x420/0x420
[198256.085450][ T7460] ? btrfs_end_log_trans+0x70/0x70
[198256.086362][ T7460] ? rcu_read_lock_sched_held+0x16/0x80
[198256.087544][ T7460] ? lock_release+0xcf/0x8a0
[198256.088305][ T7460] ? lock_downgrade+0x420/0x420
[198256.090375][ T7460] ? dget_parent+0x8e/0x300
[198256.093538][ T7460] ? do_raw_spin_lock+0x1c0/0x1c0
[198256.094918][ T7460] ? lock_downgrade+0x420/0x420
[198256.097815][ T7460] ? do_raw_spin_unlock+0xa9/0x100
[198256.101822][ T7460] ? dget_parent+0xb7/0x300
[198256.103345][ T7460] btrfs_log_dentry_safe+0x48/0x60
[198256.105052][ T7460] btrfs_sync_file+0x629/0xa40
[198256.106829][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120
[198256.109655][ T7460] ? __fget_files+0x161/0x230
[198256.110760][ T7460] vfs_fsync_range+0x6d/0x110
[198256.111923][ T7460] ? start_ordered_ops.constprop.0+0x120/0x120
[198256.113556][ T7460] __x64_sys_fsync+0x45/0x70
[198256.114323][ T7460] do_syscall_64+0x5c/0xc0
[198256.115084][ T7460] ? syscall_exit_to_user_mode+0x3b/0x50
[198256.116030][ T7460] ? do_syscall_64+0x69/0xc0
[198256.116768][ T7460] ? do_syscall_64+0x69/0xc0
[198256.117555][ T7460] ? do_syscall_64+0x69/0xc0
[198256.118324][ T7460] ? sysvec_call_function_single+0x57/0xc0
[198256.119308][ T7460] ? asm_sysvec_call_function_single+0xa/0x20
[198256.120363][ T7460] entry_SYSCALL_64_after_hwframe+0x44/0xae
[198256.121334][ T7460] RIP: 0033:0x7fc7fe97b6ab
[198256.122067][ T7460] Code: 0f 05 48 (...)
[198256.125198][ T7460] RSP: 002b:00007fc7f7c23950 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[198256.126568][ T7460] RAX: ffffffffffffffda RBX: 00007fc7f7c239f0 RCX: 00007fc7fe97b6ab
[198256.127942][ T7460] RDX: 0000000000000002 RSI: 000056167536bcf0 RDI: 0000000000000004
[198256.129302][ T7460] RBP: 0000000000000004 R08: 0000000000000000 R09: 000000007ffffeb8
[198256.130670][ T7460] R10: 00000000000001ff R11: 0000000000000293 R12: 0000000000000001
[198256.132046][ T7460] R13: 0000561674ca8140 R14: 00007fc7f7c239d0 R15: 000056167536dab8
[198256.133403][ T7460] </TASK>
Fix this by treating -EEXIST as expected at insert_dir_log_key() and have
it update the item with an end offset corresponding to the maximum between
the previously logged end offset and the new requested end offset. The end
offsets may be different due to dir index key deletions that happened as
part of unlink operations while we are logging a directory (triggered when
fsyncing some other inode parented by the directory) or during renames
which always attempt to log a single dir index deletion.
Reported-by: Zygo Blaxell <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
Fixes: 732d591a5d6c12 ("btrfs: stop copying old dir items when logging a directory")
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|