aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-09-12net: enetc: Use IRQF_NO_AUTOEN flag in request_irq()Jinjie Ruan1-2/+1
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Fixes: bbb96dc7fa1a ("enetc: Factor out the traffic start/stop procedures") Signed-off-by: Jinjie Ruan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12net: apple: bmac: Use IRQF_NO_AUTOEN flag in request_irq()Jinjie Ruan1-2/+1
disable_irq() after request_irq() still has a time gap in which interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when request IRQ. Signed-off-by: Jinjie Ruan <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12Merge branch 'bareudp-pull-inner-ip-header-on-xmit-recv'Jakub Kicinski1-2/+24
Guillaume Nault says: ==================== bareudp: Pull inner IP header on xmit/recv. Bareudp accesses the inner IP header in its xmit and recv paths. However it doesn't ensure that this header is part of skb->head. Both vxlan and geneve have received fixes for similar problems in the past. This series fixes bareudp using the same approach. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12bareudp: Pull inner IP header on xmit.Guillaume Nault1-0/+6
Both bareudp_xmit_skb() and bareudp6_xmit_skb() read their skb's inner IP header to get its ECN value (with ip_tunnel_ecn_encap()). Therefore we need to ensure that the inner IP header is part of the skb's linear data. Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/267328222f0a11519c6de04c640a4f87a38ea9ed.1726046181.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12bareudp: Pull inner IP header in bareudp_udp_encap_recv().Guillaume Nault1-2/+18
Bareudp reads the inner IP header to get the ECN value. Therefore, it needs to ensure that it's part of the skb's linear data. This is similar to the vxlan and geneve fixes for that same problem: * commit f7789419137b ("vxlan: Pull inner IP header in vxlan_rcv().") * commit 1ca1ba465e55 ("geneve: make sure to pull inner header in geneve_rx()") Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Signed-off-by: Guillaume Nault <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://patch.msgid.link/5205940067c40218a70fbb888080466b2fc288db.1726046181.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12net: caif: remove unused nameJakub Kicinski1-2/+0
Justin sent a patch to use strscpy_pad() instead of strncpy() on the name field. Simon rightly asked why the _pad() version is used, and looking closer name seems completely unused, the last code which referred to it was removed in commit 8391c4aab1aa ("caif: Bugfixes in CAIF netdevice for close and flow control") Link: https://lore.kernel.org/20240909-strncpy-net-caif-chnl_net-c-v1-1-438eb870c155@google.com Reviewed-by: Simon Horman <[email protected]> Acked-by: Justin Stitt <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12uapi: libc-compat: remove ipx leftoversJakub Kicinski1-36/+0
The uAPI headers for IPX were deleted 3 years ago in commit 6c9b40844751 ("net: Remove net/ipx.h and uapi/linux/ipx.h header files") Delete the leftover defines from libc-compat.h Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12Merge tag 'for-netdev' of ↵Jakub Kicinski20-30/+228
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-09-11 We've added 12 non-merge commits during the last 16 day(s) which contain a total of 20 files changed, 228 insertions(+), 30 deletions(-). There's a minor merge conflict in drivers/net/netkit.c: 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to dev->lltx") d96608794889 ("netkit: Disable netpoll support") The main changes are: 1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used to easily parse skbs in BPF programs attached to tracepoints, from Philo Lu. 2) Add a cond_resched() point in BPF's sock_hash_free() as there have been several syzbot soft lockup reports recently, from Eric Dumazet. 3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which got noticed when zero copy ice driver started to use it, from Maciej Fijalkowski. 4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs up via netif_receive_skb_list() to better measure latencies, from Daniel Xu. 5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann. 6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but instead gather the actual value via /proc/sys/net/core/max_skb_frags, also from Maciej Fijalkowski. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: sock_map: Add a cond_resched() in sock_hash_free() selftests/bpf: Expand skb dynptr selftests for tp_btf bpf: Allow bpf_dynptr_from_skb() for tp_btf tcp: Use skb__nullable in trace_tcp_send_reset selftests/bpf: Add test for __nullable suffix in tp_btf bpf: Support __nullable argument suffix for tp_btf bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc() tcp_bpf: Remove an unused parameter for bpf_tcp_ingress() bpf, sockmap: Correct spelling skmsg.c netkit: Disable netpoll support Signed-off-by: Jakub Kicinski <[email protected]> ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-13Merge tag 'drm-intel-fixes-2024-09-12' of ↵Dave Airlie1-2/+2
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes - Prevent a possible int overflow in wq offsets [guc] (Nikita Zhandarovich) Signed-off-by: Dave Airlie <[email protected]> From: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/ZuKTN2XngNhBB3z3@linux
2024-09-12Merge branch 'selftests-net-packetdrill-netns-and-two-imports'Jakub Kicinski25-2/+1108
Willem de Bruijn says: ==================== selftests/net: packetdrill: netns and two imports From: Willem de Bruijn <[email protected]> 1/3: run in nets, as discussed, and add missing CONFIGs 2/3: import tcp/zerocopy 3/3: import tcp/slow_start ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12selftests/net: packetdrill: import tcp/slow_startWillem de Bruijn11-0/+427
Same import process as previous tests. Also add CONFIG_NET_SCH_FQ to config, as one test uses that. Same test process as previous tests. Both with and without debug mode. Recording the steps once: make mrproper vng --build \ --config tools/testing/selftests/net/packetdrill/config \ --config kernel/configs/debug.config vng -v --run . --user root --cpus 4 -- \ make -C tools/testing/selftests TARGETS=net/packetdrill run_tests Link: https://github.com/linux-netdev/nipa/wiki/How-to-run-netdev-selftests-CI-style#how-to-build Signed-off-by: Willem de Bruijn <[email protected]> Acked-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12selftests/net: packetdrill: import tcp/zerocopyWillem de Bruijn13-0/+674
Same as initial tests, import verbatim from github.com/google/packetdrill, aside from: - update `source ./defaults.sh` path to adjust for flat dir - add SPDX headers - remove author statements if any - drop blank lines at EOF (new) Also import set_sysctls.py, which many scripts depend on to set sysctls and then restore them later. This is no longer strictly needed for namespacified sysctl. But not all sysctls are namespacified, and doesn't hurt if they are. Signed-off-by: Willem de Bruijn <[email protected]> Acked-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12selftests/net: packetdrill: run in netns and expand configWillem de Bruijn2-2/+7
Run packetdrill tests inside netns. They may change system settings, such as sysctl. Also expand config with a few more needed CONFIGs. Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Willem de Bruijn <[email protected]> Acked-by: Matthieu Baerts (NGI0) <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-13Merge tag 'amd-drm-fixes-6.11-2024-09-11' of ↵Dave Airlie19-86/+231
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.11-2024-09-11: amdgpu: - Avoid races between set_drr() functions and dc_state_destruct() - Fix regerssion related to zpos - Fix regression related to overlay cursor - SMU 14.x updates - JPEG fixes - Silence an UBSAN warning amdkfd: - Fetch cacheline size from IP discovery Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-09-12Merge branch 'ena-driver-metrics-changes'Jakub Kicinski7-68/+442
David Arinzon says: ==================== ENA driver metrics changes This patchset contains an introduction of new metrics available to ENA users. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12net: ena: Extend customer metrics reporting supportDavid Arinzon5-78/+344
ENA currently supports the following customer metrics: - `bw_in_allowance_exceeded` - `bw_out_allowance_exceeded` - `conntrack_allowance_exceeded` - `linklocal_allowance_exceeded` - `pps_allowance_exceeded` This patch adds a new metric named: `conntrack_allowance_available`. Information about these metrics is available in [1]. In addition, the interface between the driver and the device has been upgraded to allow more flexibility and expendability to additional metrics in the future. [1]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/monitoring-network-performance-ena.html#network-performance-metrics Signed-off-by: Ron Beider <[email protected]> Signed-off-by: Shahar Itzko <[email protected]> Signed-off-by: David Arinzon <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12net: ena: Add ENA Express metrics supportDavid Arinzon7-34/+142
ENA Express metrics, called `ena_srd` are exposed to customers via `ethtool`. The metrics allow customers to check the configuration (mode), tx/rx counters as well as resource utilization. The documentation is also updated to provide a general explanation about ENA Express as well as links for further information about metrics and configurations. Signed-off-by: Igor Chauskin <[email protected]> Signed-off-by: David Arinzon <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12cifs: Fix signature miscalculationDavid Howells1-1/+1
Fix the calculation of packet signatures by adding the offset into a page in the read or write data payload when hashing the pages from it. Fixes: 39bc58203f04 ("cifs: Add a function to Hash the contents of an iterator") Signed-off-by: David Howells <[email protected]> Reviewed-by: Tom Talpey <[email protected]> Reviewed-by: Paulo Alcantara (Red Hat) <[email protected]> cc: Shyam Prasad N <[email protected]> cc: Rohith Surabattula <[email protected]> cc: Jeff Layton <[email protected]> cc: [email protected] cc: [email protected] Signed-off-by: Steve French <[email protected]>
2024-09-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski267-1138/+2470
Cross-merge networking fixes after downstream PR. No conflicts (sort of) and no adjacent changes. This merge reverts commit b3c9e65eb227 ("net: hsr: remove seqnr_lock") from net, as it was superseded by commit 430d67bdcb04 ("net: hsr: Use the seqnr lock for frames received via interlink port.") in net-next. Signed-off-by: Jakub Kicinski <[email protected]>
2024-09-12Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fix from Stephen Boyd: "One build fix for 32-bit arches using the Qualcomm PLL driver. It's cheaper to use a comparison here instead of a division so we just do that to fix the build" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: qcom: clk-alpha-pll: Simplify the zonda_pll_adjust_l_val()
2024-09-12Merge tag 'block-6.11-20240912' of git://git.kernel.dk/linuxLinus Torvalds3-7/+38
Pull block fix from Jens Axboe: "Just a single fix for a deadlock issue that can happen if someone attempts to change the root disk IO scheduler with a module that requires loading from disk. Changing the scheduler freezes the queue while that operation is happening, hence causing a deadlock" * tag 'block-6.11-20240912' of git://git.kernel.dk/linux: block: Prevent deadlocks when switching elevators
2024-09-12Bluetooth: btintel_pcie: Allocate memory for driver private dataKiran K1-1/+1
Fix driver not allocating memory for struct btintel_data which is used to store internal data. Fixes: 6e65a09f9275 ("Bluetooth: btintel_pcie: Add *setup* function to download firmware") Signed-off-by: Kiran K <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-09-12Merge tag 'hwmon-for-v6.11-rc8' of ↵Linus Torvalds2-3/+20
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: - Fix clearing status register bits for chips supporting older PMBus versions * tag 'hwmon-for-v6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus) Conditionally clear individual status bits for pmbus rev >= 1.2
2024-09-12Merge tag 'wq-for-6.11-rc7-fixes' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "A fix for a NULL worker->pool deref bug which can be triggered when a worker is created and then destroyed immediately" * tag 'wq-for-6.11-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Clear worker->pool in the worker thread context
2024-09-12Merge tag 'riscv-for-linus-6.11-rc8' of ↵Linus Torvalds2-7/+12
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: - Two fixes for smp_processor_id() calls in preemptible sections: one if the perf driver, and one in the fence.i prctl. * tag 'riscv-for-linus-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Disable preemption while handling PR_RISCV_CTX_SW_FENCEI_OFF drivers: perf: Fix smp_processor_id() use in preemptible code
2024-09-12Merge tag 'net-6.11-rc8' of ↵Linus Torvalds34-190/+364
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from netfilter. There is a recently notified BT regression with no fix yet. I do not think a fix will land in the next week. Current release - regressions: - core: tighten bad gso csum offset check in virtio_net_hdr - netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init() - eth: ice: stop calling pci_disable_device() as we use pcim - eth: fou: fix null-ptr-deref in GRO. Current release - new code bugs: - hsr: prevent NULL pointer dereference in hsr_proxy_announce() Previous releases - regressions: - hsr: remove seqnr_lock - netfilter: nft_socket: fix sk refcount leaks - mptcp: pm: fix uaf in __timer_delete_sync - phy: dp83822: fix NULL pointer dereference on DP83825 devices - eth: revert "virtio_net: rx enable premapped mode by default" - eth: octeontx2-af: Modify SMQ flush sequence to drop packets Previous releases - always broken: - eth: mlx5: fix bridge mode operations when there are no VFs - eth: igb: Always call igb_xdp_ring_update_tail() under Tx lock" * tag 'net-6.11-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits) net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init() net: tighten bad gso csum offset check in virtio_net_hdr netlink: specs: mptcp: fix port endianness net: dpaa: Pad packets to ETH_ZLEN mptcp: pm: Fix uaf in __timer_delete_sync net: libwx: fix number of Rx and Tx descriptors net: dsa: felix: ignore pending status of TAS module when it's disabled net: hsr: prevent NULL pointer dereference in hsr_proxy_announce() selftests: mptcp: include net_helper.sh file selftests: mptcp: include lib.sh file selftests: mptcp: join: restrict fullmesh endp on 1st sf netfilter: nft_socket: make cgroupsv2 matching work with namespaces netfilter: nft_socket: fix sk refcount leaks MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVER dt-bindings: net: tja11xx: fix the broken binding selftests: net: csum: Fix checksums for packets with non-zero padding net: phy: dp83822: Fix NULL pointer dereference on DP83825 devices virtio_net: disable premapped mode by default Revert "virtio_net: big mode skip the unmap check" Revert "virtio_net: rx remove premapped failover code" ...
2024-09-12Merge tag 'platform-drivers-x86-v6.11-7' of ↵Linus Torvalds3-11/+58
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Ilpo Järvinen: - asus-wmi: Disable OOBE that interferes with backlight control - panasonic-laptop: Two fixes to SINF array handling * tag 'platform-drivers-x86-v6.11-7' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: asus-wmi: Disable OOBE experience on Zenbook S 16 platform/x86: panasonic-laptop: Allocate 1 entry extra in the sinf array platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
2024-09-12mm: avoid leaving partial pfn mappings around in error caseLinus Torvalds1-5/+22
As Jann points out, PFN mappings are special, because unlike normal memory mappings, there is no lifetime information associated with the mapping - it is just a raw mapping of PFNs with no reference counting of a 'struct page'. That's all very much intentional, but it does mean that it's easy to mess up the cleanup in case of errors. Yes, a failed mmap() will always eventually clean up any partial mappings, but without any explicit lifetime in the page table mapping itself, it's very easy to do the error handling in the wrong order. In particular, it's easy to mistakenly free the physical backing store before the page tables are actually cleaned up and (temporarily) have stale dangling PTE entries. To make this situation less error-prone, just make sure that any partial pfn mapping is torn down early, before any other error handling. Reported-and-tested-by: Jann Horn <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Simona Vetter <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2024-09-12Bluetooth: btusb: Fix not handling ZPL/short-transferLuiz Augusto von Dentz1-1/+4
Requesting transfers of the exact same size of wMaxPacketSize may result in ZPL/short-transfer since the USB stack cannot handle it as we are limiting the buffer size to be the same as wMaxPacketSize. Also, in terms of throughput this change has the same effect to interrupt endpoint as 290ba200815f "Bluetooth: Improve USB driver throughput by increasing the frame size" had for the bulk endpoint, so users of the advertisement bearer (e.g. BT Mesh) may benefit from this change. Fixes: 5e23b923da03 ("[Bluetooth] Add generic driver for Bluetooth USB devices") Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Kiran K <[email protected]>
2024-09-12Bluetooth: btusb: Add 2 USB HW IDs for MT7925 (0xe118/e)Michael Burch1-0/+4
Add 2 USB HW IDs for MT7925 (0xe118/e) to ensure proper recognition. These HW IDs are extracted from Windows driver inf file: https://dlcdnets.asus.com/pub/ASUS/nb/Image/Driver/Bluetooth/39389/Bluetooth_DCH_MediaTek_B_V1.1037.0.433Sub2_39389.exe?model=H7606WV Patch has been tested successfully on an Asus ProArt P16 model H7606WV. Controller is recognized devices pair successfully. Signed-off-by: Michael Burch <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-09-12Bluetooth: btsdio: Do not bind to non-removable CYW4373Scott Ehlert1-0/+1
CYW4373 devices soldered onto the PCB (non-removable), use a UART connection for Bluetooth and the advertised btsdio support as an SDIO function should be ignored. Signed-off-by: Scott Ehlert <[email protected]> Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-09-12io_uring: add IORING_REGISTER_COPY_BUFFERS methodJens Axboe4-0/+111
Buffers can get registered with io_uring, which allows to skip the repeated pin_pages, unpin/unref pages for each O_DIRECT operation. This reduces the overhead of O_DIRECT IO. However, registrering buffers can take some time. Normally this isn't an issue as it's done at initialization time (and hence less critical), but for cases where rings can be created and destroyed as part of an IO thread pool, registering the same buffers for multiple rings become a more time sensitive proposition. As an example, let's say an application has an IO memory pool of 500G. Initial registration takes: Got 500 huge pages (each 1024MB) Registered 500 pages in 409 msec or about 0.4 seconds. If we go higher to 900 1GB huge pages being registered: Registered 900 pages in 738 msec which is, as expected, a fully linear scaling. Rather than have each ring pin/map/register the same buffer pool, provide an io_uring_register(2) opcode to simply duplicate the buffers that are registered with another ring. Adding the same 900GB of registered buffers to the target ring can then be accomplished in: Copied 900 pages in 17 usec While timing differs a bit, this provides around a 25,000-40,000x speedup for this use case. Signed-off-by: Jens Axboe <[email protected]>
2024-09-12io_uring/register: provide helper to get io_ring_ctx from 'fd'Jens Axboe2-21/+34
Can be done in one of two ways: 1) Regular file descriptor, just fget() 2) Registered ring, index our own table for that In preparation for adding another register use of needing to get a ctx from a file descriptor, abstract out this helper and use it in the main register syscall as well. Signed-off-by: Jens Axboe <[email protected]>
2024-09-12erofs: reject inodes with negative i_sizeGao Xiang1-3/+6
Negative i_size is never supported, although crafted images with inodes having negative i_size will NOT lead to security issues in our current codebase: The following image can verify this (gzip+base64 encoded): H4sICCmk4mYAA3Rlc3QuaW1nAGNgGAWjYBSMVPDo4dcH3jP2aTED2TwMKgxMUHHNJY/SQDQX LxcDIw3tZwXit44MDNpQ/n8gQJZ/vxjijosPuSyZ0DUDgQqcZoKzVYFsDShbHeh6PT29ktTi Eqz2g/y2pBFiLxDMh4lhs5+W4TAKRsEoGAWjYBSMglEwCkYBPQAAS2DbowAQAAA= Mark as bad inodes for such corrupted inodes explicitly. Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Gao Xiang <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-09-12erofs: restrict pcluster size limitationsGao Xiang2-23/+24
Error out if {en,de}encoded size of a pcluster is unsupported: Maximum supported encoded size (of a pcluster): 1 MiB Maximum supported decoded size (of a pcluster): 12 MiB Users can still choose to use supported large configurations (e.g., for archival purposes), but there may be performance penalties in low-memory scenarios compared to smaller pclusters. Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Gao Xiang <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-09-12erofs: allocate more short-lived pages from reserved pool firstChunhai Guo1-2/+3
This patch aims to allocate bvpages and short-lived compressed pages from the reserved pool first. After applying this patch, there are three benefits. 1. It reduces the page allocation time. The bvpages and short-lived compressed pages account for about 4% of the pages allocated from the system in the multi-app launch benchmarks [1]. It reduces the page allocation time accordingly and lowers the likelihood of blockage by page allocation in low memory scenarios. 2. The pages in the reserved pool will be allocated on demand. Currently, bvpages and short-lived compressed pages are short-lived pages allocated from the system, and the pages in the reserved pool all originate from short-lived pages. Consequently, the number of reserved pool pages will increase to z_erofs_rsv_nrpages over time. With this patch, all short-lived pages are allocated from the reserved pool first, so the number of reserved pool pages will only increase when there are not enough pages. Thus, even if z_erofs_rsv_nrpages is set to a large number for specific reasons, the actual number of reserved pool pages may remain low as per demand. In the multi-app launch benchmarks [1], z_erofs_rsv_nrpages is set at 256, while the number of reserved pool pages remains below 64. 3. When erofs cache decompression is disabled (EROFS_ZIP_CACHE_DISABLED), all pages will *only* be allocated from the reserved pool for erofs. This will significantly reduce the memory pressure from erofs. [1] For additional details on the multi-app launch benchmarks, please refer to commit 0f6273ab4637 ("erofs: add a reserved buffer pool for lz4 decompression"). Signed-off-by: Chunhai Guo <[email protected]> Reviewed-by: Gao Xiang <[email protected]> Reviewed-by: Chao Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Gao Xiang <[email protected]>
2024-09-12LoongArch: KVM: Implement function kvm_para_has_feature()Bibo Mao2-15/+27
Implement function kvm_para_has_feature() to detect supported paravirt features. It can be used by device driver to detect and enable paravirt features, such as the EIOINTC irqchip driver is able to detect feature KVM_FEATURE_VIRT_EXTIOI and do some optimization. Signed-off-by: Bibo Mao <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2024-09-12block: fix potential invalid pointer dereference in blk_add_partitionRiyan Dhiman1-3/+5
The blk_add_partition() function initially used a single if-condition (IS_ERR(part)) to check for errors when adding a partition. This was modified to handle the specific case of -ENXIO separately, allowing the function to proceed without logging the error in this case. However, this change unintentionally left a path where md_autodetect_dev() could be called without confirming that part is a valid pointer. This commit separates the error handling logic by splitting the initial if-condition, improving code readability and handling specific error scenarios explicitly. The function now distinguishes the general error case from -ENXIO without altering the existing behavior of md_autodetect_dev() calls. Fixes: b72053072c0b (block: allow partitions on host aware zone devices) Signed-off-by: Riyan Dhiman <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2024-09-12drm/xe/client: add missing bo locking in show_meminfo()Matthew Auld1-3/+36
bo_meminfo() wants to inspect bo state like tt and the ttm resource, however this state can change at any point leading to stuff like NPD and UAF, if the bo lock is not held. Grab the bo lock when calling bo_meminfo(), ensuring we drop any spinlocks first. In the case of object_idr we now also need to hold a ref. v2 (MattB) - Also add xe_bo_assert_held() Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing") Signed-off-by: Matthew Auld <[email protected]> Cc: Himal Prasad Ghimiray <[email protected]> Cc: Tejas Upadhyay <[email protected]> Cc: "Thomas Hellström" <[email protected]> Cc: <[email protected]> # v6.8+ Reviewed-by: Matthew Brost <[email protected]> Reviewed-by: Tejas Upadhyay <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 4f63d712fa104c3ebefcb289d1e733e86d8698c7) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-12drm/xe/client: fix deadlock in show_meminfo()Matthew Auld1-1/+5
There is a real deadlock as well as sleeping in atomic() bug in here, if the bo put happens to be the last ref, since bo destruction wants to grab the same spinlock and sleeping locks. Fix that by dropping the ref using xe_bo_put_deferred(), and moving the final commit outside of the lock. Dropping the lock around the put is tricky since the bo can go out of scope and delete itself from the list, making it difficult to navigate to the next list entry. Fixes: 0845233388f8 ("drm/xe: Implement fdinfo memory stats printing") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2727 Signed-off-by: Matthew Auld <[email protected]> Cc: Himal Prasad Ghimiray <[email protected]> Cc: Tejas Upadhyay <[email protected]> Cc: "Thomas Hellström" <[email protected]> Cc: <[email protected]> # v6.8+ Reviewed-by: Matthew Brost <[email protected]> Reviewed-by: Tejas Upadhyay <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-12drm/xe/oa: Enable Xe2+ PES disaggregationAshutosh Dixit2-0/+5
Enable Xe2+ PES disaggregation (for OAG) to retrieve disaggregated metrics when disaggregated data is needed. Userspace can select whether to receive aggregated or disaggregated metrics via the particular OA configuration it uses (programmed via DRM_XE_OBSERVATION_OP_ADD_CONFIG). Bspec: 61101 Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd") Signed-off-by: Ashutosh Dixit <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Cc: [email protected] (cherry picked from commit fb2551a0e93897aec7fb3d4f473ebc06b146d160) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-12drm/xe/display: fix compat IS_DISPLAY_STEP() range endJani Nikula1-1/+1
It's supposed to be an open range at the end like in i915. Fingers crossed that nobody relies on this definition. Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Reviewed-by: Lucas De Marchi <[email protected]> Reviewed-by: Matt Roper <[email protected]> Acked-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/fe8743770694e429f6902491cdb306c97bdf701a.1724180287.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <[email protected]> (cherry picked from commit 453afb1a439994deeacb8d9ecbb48c1f2348ea0a) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-12drm/xe: Fix access_ok check in user_fence_createNirmoy Das1-1/+1
Check size of the data not size of the pointer. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Fixes: ddeb7989a98f ("drm/xe: Validate user fence during creation") Cc: Matthew Auld <[email protected]> Cc: Matthew Brost <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Reviewed-by: Tejas Upadhyay <[email protected]> Reviewed-by: Apoorva Singh <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Nirmoy Das <[email protected]> (cherry picked from commit e102b5ed6e283a144793cab8fcd95f61d0ddbadb) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-12drm/xe: Fix possible UAF in guc_exec_queue_process_msgMatthew Brost1-1/+3
Store xe_device ahead of processing message as message can be free'd in some cases. v2: - Including missing local changes v3: - Resend for CI Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: 55ea73aacfb9 ("drm/xe: Build PM into GuC CT layer") Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Himal Prasad Ghimiray <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 1a394b4f504f33eac8c38b6f42ba025105c7e869) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-12drm/xe: Remove fence check from send_tlb_invalidationMatthew Brost1-2/+2
'fence' argument in send_tlb_invalidation cannot be NULL, remove non-NULL check from send_tlb_invalidation. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Fixes: 58bfe6674467 ("drm/xe: Drop xe_gt_tlb_invalidation_wait") Signed-off-by: Matthew Brost <[email protected]> Reviewed-by: Nirmoy Das <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Nirmoy Das <[email protected]> (cherry picked from commit 6482253e6e1ad1c3a76645a3899d3cfdb5b918cb) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-12drm/xe/gt: Remove double includeLucas De Marchi1-1/+0
The header generated/xe_wa_oob.h is included twice. Remove one. Fixes: 27cb2b7fec2a ("drm/xe/bmg: implement Wa_16023588340") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Reviewed-by: Michal Wajdeczko <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Lucas De Marchi <[email protected]> (cherry picked from commit 3d122660dc70029d9cccb4e8670125f0affa959e) Signed-off-by: Rodrigo Vivi <[email protected]>
2024-09-12net: netfilter: move nf flowtable bpf initialization in ↵Lorenzo Bianconi2-1/+7
nf_flow_table_module_init() Move nf flowtable bpf initialization in nf_flow_table module load routine since nf_flow_table_bpf is part of nf_flow_table module and not nf_flow_table_inet one. This patch allows to avoid the following kernel warning running the reproducer below: $modprobe nf_flow_table_inet $rmmod nf_flow_table_inet $modprobe nf_flow_table_inet modprobe: ERROR: could not insert 'nf_flow_table_inet': Invalid argument [ 184.081501] ------------[ cut here ]------------ [ 184.081527] WARNING: CPU: 0 PID: 1362 at kernel/bpf/btf.c:8206 btf_populate_kfunc_set+0x23c/0x330 [ 184.081550] CPU: 0 UID: 0 PID: 1362 Comm: modprobe Kdump: loaded Not tainted 6.11.0-0.rc5.22.el10.x86_64 #1 [ 184.081553] Hardware name: Red Hat OpenStack Compute, BIOS 1.14.0-1.module+el8.4.0+8855+a9e237a9 04/01/2014 [ 184.081554] RIP: 0010:btf_populate_kfunc_set+0x23c/0x330 [ 184.081558] RSP: 0018:ff22cfb38071fc90 EFLAGS: 00010202 [ 184.081559] RAX: 0000000000000001 RBX: 0000000000000001 RCX: 0000000000000000 [ 184.081560] RDX: 000000000000006e RSI: ffffffff95c00000 RDI: ff13805543436350 [ 184.081561] RBP: ffffffffc0e22180 R08: ff13805543410808 R09: 000000000001ec00 [ 184.081562] R10: ff13805541c8113c R11: 0000000000000010 R12: ff13805541b83c00 [ 184.081563] R13: ff13805543410800 R14: 0000000000000001 R15: ffffffffc0e2259a [ 184.081564] FS: 00007fa436c46740(0000) GS:ff1380557ba00000(0000) knlGS:0000000000000000 [ 184.081569] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 184.081570] CR2: 000055e7b3187000 CR3: 0000000100c48003 CR4: 0000000000771ef0 [ 184.081571] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 184.081572] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 184.081572] PKRU: 55555554 [ 184.081574] Call Trace: [ 184.081575] <TASK> [ 184.081578] ? show_trace_log_lvl+0x1b0/0x2f0 [ 184.081580] ? show_trace_log_lvl+0x1b0/0x2f0 [ 184.081582] ? __register_btf_kfunc_id_set+0x199/0x200 [ 184.081585] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081586] ? __warn.cold+0x93/0xed [ 184.081590] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081592] ? report_bug+0xff/0x140 [ 184.081594] ? handle_bug+0x3a/0x70 [ 184.081596] ? exc_invalid_op+0x17/0x70 [ 184.081597] ? asm_exc_invalid_op+0x1a/0x20 [ 184.081601] ? btf_populate_kfunc_set+0x23c/0x330 [ 184.081602] __register_btf_kfunc_id_set+0x199/0x200 [ 184.081605] ? __pfx_nf_flow_inet_module_init+0x10/0x10 [nf_flow_table_inet] [ 184.081607] do_one_initcall+0x58/0x300 [ 184.081611] do_init_module+0x60/0x230 [ 184.081614] __do_sys_init_module+0x17a/0x1b0 [ 184.081617] do_syscall_64+0x7d/0x160 [ 184.081620] ? __count_memcg_events+0x58/0xf0 [ 184.081623] ? handle_mm_fault+0x234/0x350 [ 184.081626] ? do_user_addr_fault+0x347/0x640 [ 184.081630] ? clear_bhb_loop+0x25/0x80 [ 184.081633] ? clear_bhb_loop+0x25/0x80 [ 184.081634] ? clear_bhb_loop+0x25/0x80 [ 184.081637] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 184.081639] RIP: 0033:0x7fa43652e4ce [ 184.081647] RSP: 002b:00007ffe8213be18 EFLAGS: 00000246 ORIG_RAX: 00000000000000af [ 184.081649] RAX: ffffffffffffffda RBX: 000055e7b3176c20 RCX: 00007fa43652e4ce [ 184.081650] RDX: 000055e7737fde79 RSI: 0000000000003990 RDI: 000055e7b3185380 [ 184.081651] RBP: 000055e7737fde79 R08: 0000000000000007 R09: 000055e7b3179bd0 [ 184.081651] R10: 0000000000000001 R11: 0000000000000246 R12: 0000000000040000 [ 184.081652] R13: 000055e7b3176fa0 R14: 0000000000000000 R15: 000055e7b3179b80 Fixes: 391bb6594fd3 ("netfilter: Add bpf_xdp_flow_lookup kfunc") Signed-off-by: Lorenzo Bianconi <[email protected]> Acked-by: Florian Westphal <[email protected]> Acked-by: Pablo Neira Ayuso <[email protected]> Link: https://patch.msgid.link/20240911-nf-flowtable-bpf-modprob-fix-v1-1-f9fc075aafc3@kernel.org Signed-off-by: Paolo Abeni <[email protected]>
2024-09-12Merge tag 'nf-24-09-12' of ↵Paolo Abeni1-6/+42
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains two fixes from Florian Westphal: Patch #1 fixes a sk refcount leak in nft_socket on mismatch. Patch #2 fixes cgroupsv2 matching from containers due to incorrect level in subtree. netfilter pull request 24-09-12 * tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_socket: make cgroupsv2 matching work with namespaces netfilter: nft_socket: fix sk refcount leaks ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2024-09-12LoongArch: KVM: Enable paravirt feature control from VMMBibo Mao11-48/+117
Export kernel paravirt features to user space, so that VMM can control each single paravirt feature. By default paravirt features will be the same with kvm supported features if VMM does not set it. Also a new feature KVM_FEATURE_VIRT_EXTIOI is added which can be set from user space. This feature indicates that the virt EIOINTC can route interrupts to 256 vCPUs, rather than 4 vCPUs like with real HW. Signed-off-by: Bibo Mao <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2024-09-12LoongArch: KVM: Add PMU support for guestSong Gao7-3/+205
On LoongArch, the host and guest have their own PMU CSRs registers and they share PMU hardware resources. A set of PMU CSRs consists of a CTRL register and a CNTR register. We can set which PMU CSRs are used by the guest by writing to the GCFG register [24:26] bits. On KVM side: - Save the host PMU CSRs into structure kvm_context. - If the host supports the PMU feature. - When entering guest mode, save the host PMU CSRs and restore the guest PMU CSRs. - When exiting guest mode, save the guest PMU CSRs and restore the host PMU CSRs. Reviewed-by: Bibo Mao <[email protected]> Signed-off-by: Song Gao <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.