aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-25net: stmmac: only enable DMA interrupts when readyVincent Whitchurch1-2/+26
In this driver's ->ndo_open() callback, it enables DMA interrupts, starts the DMA channels, then requests interrupts with request_irq(), and then finally enables napi. If RX DMA interrupts are received before napi is enabled, no processing is done because napi_schedule_prep() will return false. If the network has a lot of broadcast/multicast traffic, then the RX ring could fill up completely before napi is enabled. When this happens, no further RX interrupts will be delivered, and the driver will fail to receive any packets. Fix this by only enabling DMA interrupts after all other initialization is complete. Fixes: 523f11b5d4fd72efb ("net: stmmac: move hardware setup for stmmac_open to new function") Reported-by: Lars Persson <[email protected]> Signed-off-by: Vincent Whitchurch <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25xen/netfront: destroy queues before real_num_tx_queues is zeroedMarek Marczykowski-Górecki1-16/+23
xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac083414eb5bb99a6d2ed53dc2c1b405224e5 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ #226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at https://github.com/QubesOS/qubes-issues/issues/7257 Fixes: d7dac083414eb5bb9 ("net-sysfs: update the queue counts in the unregistration path") Cc: [email protected] Signed-off-by: Marek Marczykowski-Górecki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25Merge tag 'omap-for-v5.17/fixes-signed' of ↵Arnd Bergmann3-35/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps Fixes for devkit8000 timer regression. Similar to the earlier beagleboard fixes, we must not configure the clocksource drivers to use an alternative timer configuration. It causes unnecessary issues with power management. Only some old designs based on early beagleboard revisions with a miswired timer need to use the alternative timer. * tag 'omap-for-v5.17/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Use 32KiHz oscillator on devkit8000 ARM: dts: switch timer config to common devkit8000 devicetree Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-02-25Revert "KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"Sean Christopherson2-11/+21
Revert back to refreshing vmcs.HOST_CR3 immediately prior to VM-Enter. The PCID (ASID) part of CR3 can be bumped without KVM being scheduled out, as the kernel will switch CR3 during __text_poke(), e.g. in response to a static key toggling. If switch_mm_irqs_off() chooses a new ASID for the mm associate with KVM, KVM will do VM-Enter => VM-Exit with a stale vmcs.HOST_CR3. Add a comment to explain why KVM must wait until VM-Enter is imminent to refresh vmcs.HOST_CR3. The following splat was captured by stashing vmcs.HOST_CR3 in kvm_vcpu and adding a WARN in load_new_mm_cr3() to fire if a new ASID is being loaded for the KVM-associated mm while KVM has a "running" vCPU: static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush) { struct kvm_vcpu *vcpu = kvm_get_running_vcpu(); ... WARN(vcpu && (vcpu->cr3 & GENMASK(11, 0)) != (new_mm_cr3 & GENMASK(11, 0)) && (vcpu->cr3 & PHYSICAL_PAGE_MASK) == (new_mm_cr3 & PHYSICAL_PAGE_MASK), "KVM is hosed, loading CR3 = %lx, vmcs.HOST_CR3 = %lx", new_mm_cr3, vcpu->cr3); } ------------[ cut here ]------------ KVM is hosed, loading CR3 = 8000000105393004, vmcs.HOST_CR3 = 105393003 WARNING: CPU: 4 PID: 20717 at arch/x86/mm/tlb.c:291 load_new_mm_cr3+0x82/0xe0 Modules linked in: vhost_net vhost vhost_iotlb tap kvm_intel CPU: 4 PID: 20717 Comm: stable Tainted: G W 5.17.0-rc3+ #747 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:load_new_mm_cr3+0x82/0xe0 RSP: 0018:ffffc9000489fa98 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 8000000105393004 RCX: 0000000000000027 RDX: 0000000000000027 RSI: 00000000ffffdfff RDI: ffff888277d1b788 RBP: 0000000000000004 R08: ffff888277d1b780 R09: ffffc9000489f8b8 R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88810678a800 R14: 0000000000000004 R15: 0000000000000c33 FS: 00007fa9f0e72700(0000) GS:ffff888277d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001001b5003 CR4: 0000000000172ea0 Call Trace: <TASK> switch_mm_irqs_off+0x1cb/0x460 __text_poke+0x308/0x3e0 text_poke_bp_batch+0x168/0x220 text_poke_finish+0x1b/0x30 arch_jump_label_transform_apply+0x18/0x30 static_key_slow_inc_cpuslocked+0x7c/0x90 static_key_slow_inc+0x16/0x20 kvm_lapic_set_base+0x116/0x190 kvm_set_apic_base+0xa5/0xe0 kvm_set_msr_common+0x2f4/0xf60 vmx_set_msr+0x355/0xe70 [kvm_intel] kvm_set_msr_ignored_check+0x91/0x230 kvm_emulate_wrmsr+0x36/0x120 vmx_handle_exit+0x609/0x6c0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x146f/0x1b80 kvm_vcpu_ioctl+0x279/0x690 __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> ---[ end trace 0000000000000000 ]--- This reverts commit 15ad9762d69fd8e40a4a51828c1d6b0c1b8fbea0. Fixes: 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") Reported-by: Wanpeng Li <[email protected]> Cc: Lai Jiangshan <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Acked-by: Lai Jiangshan <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25Revert "KVM: VMX: Save HOST_CR3 in vmx_set_host_fs_gs()"Sean Christopherson3-14/+14
Undo a nested VMX fix as a step toward reverting the commit it fixed, 15ad9762d69f ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()"), as the underlying premise that "host CR3 in the vcpu thread can only be changed when scheduling" is wrong. This reverts commit a9f2705ec84449e3b8d70c804766f8e97e23080d. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-25can: gs_usb: change active_channels's type from atomic_t to u8Vincent Mailhol1-5/+5
The driver uses an atomic_t variable: gs_usb:active_channels to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. However, the driver does not decrement the counter when an error occurs in gs_can_open(). This issue is fixed by changing the type from atomic_t to u8 and by simplifying the logic accordingly. It is safe to use an u8 here because the network stack big kernel lock (a.k.a. rtnl_mutex) is being hold. For details, please refer to [1]. [1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-02-25can: etas_es58x: change opened_channel_cnt's type from atomic_t to u8Vincent Mailhol2-7/+10
The driver uses an atomic_t variable: struct es58x_device::opened_channel_cnt to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. While the intent was to prevent race conditions, the choice of an atomic_t turns out to be a bad idea for several reasons: - implementation is incorrect and fails to decrement opened_channel_cnt when the URB allocation fails as reported in [1]. - even if opened_channel_cnt were to be correctly decremented, atomic_t is insufficient to cover edge cases: there can be a race condition in which 1/ a first process fails to allocate URBs memory 2/ a second process enters es58x_open() before the first process does its cleanup and decrements opened_channed_cnt. In which case, the second process would successfully return despite the URBs memory not being allocated. - actually, any kind of locking mechanism was useless here because it is redundant with the network stack big kernel lock (a.k.a. rtnl_lock) which is being hold by all the callers of net_device_ops:ndo_open() and net_device_ops:ndo_close(). c.f. the ASSERST_RTNL() calls in __dev_open() [2] and __dev_close_many() [3]. The atmomic_t is thus replaced by a simple u8 type and the logic to increment and decrement es58x_device:opened_channel_cnt is simplified accordingly fixing the bug reported in [1]. We do not check again for ASSERST_RTNL() as this is already done by the callers. [1] https://lore.kernel.org/linux-can/20220201140351.GA2548@kili/T/#u [2] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1463 [3] https://elixir.bootlin.com/linux/v5.16/source/net/core/dev.c#L1541 Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Link: https://lore.kernel.org/all/[email protected] Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2022-02-24Merge branch 'mptcp-fixes-for-5-17'Jakub Kicinski2-4/+18
Mat Martineau says: ==================== mptcp: Fixes for 5.17 Patch 1 fixes an issue with the SIOCOUTQ ioctl in MPTCP sockets that have performed a fallback to TCP. Patch 2 is a selftest fix to correctly remove temp files. Patch 3 fixes a shift-out-of-bounds issue found by syzkaller. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24mptcp: Correctly set DATA_FIN timeout when number of retransmits is largeMat Martineau1-2/+5
Syzkaller with UBSAN uncovered a scenario where a large number of DATA_FIN retransmits caused a shift-out-of-bounds in the DATA_FIN timeout calculation: ================================================================================ UBSAN: shift-out-of-bounds in net/mptcp/protocol.c:470:29 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 1 PID: 13059 Comm: kworker/1:0 Not tainted 5.17.0-rc2-00630-g5fbf21c90c60 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: events mptcp_worker Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x5a lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e lib/ubsan.c:330 mptcp_set_datafin_timeout net/mptcp/protocol.c:470 [inline] __mptcp_retrans.cold+0x72/0x77 net/mptcp/protocol.c:2445 mptcp_worker+0x58a/0xa70 net/mptcp/protocol.c:2528 process_one_work+0x9df/0x16d0 kernel/workqueue.c:2307 worker_thread+0x95/0xe10 kernel/workqueue.c:2454 kthread+0x2f4/0x3b0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> ================================================================================ This change limits the maximum timeout by limiting the size of the shift, which keeps all intermediate values in-bounds. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/259 Fixes: 6477dd39e62c ("mptcp: Retransmit DATA_FIN") Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24selftests: mptcp: do complete cleanup at exitPaolo Abeni1-2/+2
After commit 05be5e273c84 ("selftests: mptcp: add disconnect tests") the mptcp selftests leave behind a couple of tmp files after each run. run_tests_disconnect() misnames a few variables used to track them. Address the issue setting the appropriate global variables Fixes: 05be5e273c84 ("selftests: mptcp: add disconnect tests") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24mptcp: accurate SIOCOUTQ for fallback socketPaolo Abeni1-0/+11
The MPTCP SIOCOUTQ implementation is not very accurate in case of fallback: it only measures the data in the MPTCP-level write queue, but it does not take in account the subflow write queue utilization. In case of fallback the first can be empty, while the latter is not. The above produces sporadic self-tests issues and can foul legit user-space application. Fix the issue additionally querying the subflow in case of fallback. Fixes: 644807e3e462 ("mptcp: add SIOCINQ, OUTQ and OUTQNSD ioctls") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/260 Reported-by: Matthieu Baerts <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24riscv: fix oops caused by irqsoff latency tracerChangbin Du4-5/+45
The trace_hardirqs_{on,off}() require the caller to setup frame pointer properly. This because these two functions use macro 'CALLER_ADDR1' (aka. __builtin_return_address(1)) to acquire caller info. If the $fp is used for other purpose, the code generated this macro (as below) could trigger memory access fault. 0xffffffff8011510e <+80>: ld a1,-16(s0) 0xffffffff80115112 <+84>: ld s2,-8(a1) # <-- paging fault here The oops message during booting if compiled with 'irqoff' tracer enabled: [ 0.039615][ T0] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000f8 [ 0.041925][ T0] Oops [#1] [ 0.042063][ T0] Modules linked in: [ 0.042864][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.17.0-rc1-00233-g9a20c48d1ed2 #29 [ 0.043568][ T0] Hardware name: riscv-virtio,qemu (DT) [ 0.044343][ T0] epc : trace_hardirqs_on+0x56/0xe2 [ 0.044601][ T0] ra : restore_all+0x12/0x6e [ 0.044721][ T0] epc : ffffffff80126a5c ra : ffffffff80003b94 sp : ffffffff81403db0 [ 0.044801][ T0] gp : ffffffff8163acd8 tp : ffffffff81414880 t0 : 0000000000000020 [ 0.044882][ T0] t1 : 0098968000000000 t2 : 0000000000000000 s0 : ffffffff81403de0 [ 0.044967][ T0] s1 : 0000000000000000 a0 : 0000000000000001 a1 : 0000000000000100 [ 0.045046][ T0] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.045124][ T0] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000054494d45 [ 0.045210][ T0] s2 : ffffffff80003b94 s3 : ffffffff81a8f1b0 s4 : ffffffff80e27b50 [ 0.045289][ T0] s5 : ffffffff81414880 s6 : ffffffff8160fa00 s7 : 00000000800120e8 [ 0.045389][ T0] s8 : 0000000080013100 s9 : 000000000000007f s10: 0000000000000000 [ 0.045474][ T0] s11: 0000000000000000 t3 : 7fffffffffffffff t4 : 0000000000000000 [ 0.045548][ T0] t5 : 0000000000000000 t6 : ffffffff814aa368 [ 0.045620][ T0] status: 0000000200000100 badaddr: 00000000000000f8 cause: 000000000000000d [ 0.046402][ T0] [<ffffffff80003b94>] restore_all+0x12/0x6e This because the $fp(aka. $s0) register is not used as frame pointer in the assembly entry code. resume_kernel: REG_L s0, TASK_TI_PREEMPT_COUNT(tp) bnez s0, restore_all REG_L s0, TASK_TI_FLAGS(tp) andi s0, s0, _TIF_NEED_RESCHED beqz s0, restore_all call preempt_schedule_irq j restore_all To fix above issue, here we add one extra level wrapper for function trace_hardirqs_{on,off}() so they can be safely called by low level entry code. Signed-off-by: Changbin Du <[email protected]> Fixes: 3c4697982982 ("riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-02-24riscv: fix nommu_k210_sdcard_defconfigDamien Le Moal1-1/+1
Instead of an arbitrary delay, use the "rootwait" kernel option to wait for the mmc root device to be ready. Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Anup Patel <[email protected]> Fixes: 7e09fd3994c5 ("riscv: Add Canaan Kendryte K210 SD card defconfig") Cc: [email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2022-02-24tracing: Dump stacktrace trigger to the corresponding instanceDaniel Bristot de Oliveira1-1/+6
The stacktrace event trigger is not dumping the stacktrace to the instance where it was enabled, but to the global "instance." Use the private_data, pointing to the trigger file, to figure out the corresponding trace instance, and use it in the trigger action, like snapshot_trigger does. Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org Cc: [email protected] Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Reviewed-by: Tom Zanussi <[email protected]> Tested-by: Tom Zanussi <[email protected]> Signed-off-by: Daniel Bristot de Oliveira <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2022-02-24Merge tag 'for-net-2022-02-24' of ↵Jakub Kicinski5-12/+33
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix regression with RFCOMM - Fix regression with LE devices using Privacy (RPA) - Fix regression with LE devices not waiting proper timeout to establish connections - Fix race in smp * tag 'for-net-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_sync: Fix not using conn_timeout Bluetooth: hci_sync: Fix hci_update_accept_list_sync Bluetooth: assign len after null check Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunks Bluetooth: fix data races in smp_unregister(), smp_del_chan() Bluetooth: hci_core: Fix leaking sent_cmd skb ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds2-99/+10
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A couple driver fixes in the clk subsystem - Fix a hang due to bad clk parent in the Ingenic jz4725b driver - Fix SD controllers on Qualcomm MSM8994 SoCs by removing clks that shouldn't be touched" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: jz4725b: fix mmc0 clock gating clk: qcom: gcc-msm8994: Remove NoC clocks
2022-02-24Merge tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drmLinus Torvalds25-81/+156
Pull drm fixes from Dave Airlie: "Regular drm fixes pull, i915, amdgpu and tegra mostly, all pretty small. core: - edid: Always set RGB444 tegra: - tegra186 suspend/resume fixes - syncpoint wait fix - build warning fix - eDP on older devices fix amdgpu: - Display FP fix - PCO powergating fix - RDNA2 OEM SKU stability fixes - Display PSR fix - PCI ASPM fix - Display link encoder fix for TEST_COMMIT - Raven2 suspend/resume fix - Fix a regression in virtual display support - GPUVM eviction fix i915: - Fix QGV handling on ADL-P+ - Fix bw atomic check when switching between SAGV vs. no SAGV - Disconnect PHYs left connected by BIOS on disabled ports - Fix SAVG to no SAGV transitions on TGL+ - Print PHY name properly on calibration error (DG2) imx: - dcss: Select GEM CMA helpers radeon: - Fix some variables's type vc4: - Fix codec cleanup - Fix PM reference counting" * tag 'drm-fixes-2022-02-25' of git://anongit.freedesktop.org/drm/drm: (24 commits) drm/amdgpu: check vm ready by amdgpu_vm->evicting flag drm/amdgpu: bypass tiling flag check in virtual display case (v2) Revert "drm/amdgpu: add modifiers in amdgpu_vkms_plane_init()" drm/amdgpu: do not enable asic reset for raven2 drm/amd/display: Fix stream->link_enc unassigned during stream removal drm/amd: Check if ASPM is enabled from PCIe subsystem drm/edid: Always set RGB444 drm/tegra: dpaux: Populate AUX bus drm/radeon: fix variable type drm/amd/display: For vblank_disable_immediate, check PSR is really used drm/amd/pm: fix some OEM SKU specific stability issues drm/amdgpu: disable MMHUB PG for Picasso drm/amd/display: Protect update_bw_bounding_box FPU code. drm/i915/dg2: Print PHY name properly on calibration error drm/i915: Fix bw atomic check when switching between SAGV vs. no SAGV drm/i915: Correctly populate use_sagv_wm for all pipes drm/i915: Disconnect PHYs left connected by BIOS on disabled ports drm/i915: Widen the QGV point mask drm/imx/dcss: i.MX8MQ DCSS select DRM_GEM_CMA_HELPER drm/vc4: crtc: Fix runtime_pm reference counting ...
2022-02-24clk: lan966x: Fix linking errorHoratiu Vultur1-0/+2
If the config options HAS_IOMEM is not set then the driver fails to link with the following error: clk-lan966x.c:(.text+0x950): undefined reference to `devm_platform_ioremap_resource' Therefor add missing dependencies: HAS_IOMEM and OF. Fixes: 54104ee02333 ("clk: lan966x: Add lan966x SoC clock driver") Reported-by: kernel test robot <[email protected]> Signed-off-by: Horatiu Vultur <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Nicolas Ferre <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2022-02-25drm/exynos: Search for TE-gpio in DSI panel's nodeMarek Szyprowski1-1/+1
TE-gpio, if defined, is placed in the panel's node, not the parent DSI node. Change the devm_gpiod_get_optional() to gpiod_get_optional() and pass proper device node to it. The code already has a proper cleanup path, so it looks that the devm_* variant has been applied accidentally during the conversion to gpiod API. Fixes: ee6c8b5afa62 ("drm/exynos: Replace legacy gpio interface for gpiod interface") Signed-off-by: Marek Szyprowski <[email protected]> Fixed a typo. Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos: Don't fail if no TE-gpio is defined for DSI driverMarek Szyprowski1-1/+3
TE-gpio is optional and if it is not found then gpiod_get_optional() returns NULL. In such case the code will continue and try to convert NULL gpiod to irq what in turn fails. The failure is then propagated and driver is not registered. Fix this by returning early from exynos_dsi_register_te_irq() if no TE-gpio is found. Fixes: ee6c8b5afa62 ("drm/exynos: Replace legacy gpio interface for gpiod interface") Signed-off-by: Marek Szyprowski <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos: gsc: Use platform_get_irq() to get the interruptLad Prabhakar1-7/+3
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos/fimc: Use platform_get_irq() to get the interruptLad Prabhakar1-8/+5
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos/exynos_drm_fimd: Use platform_get_irq_byname() to get the interruptLad Prabhakar1-9/+4
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos: mixer: Use platform_get_irq() to get the interruptLad Prabhakar1-8/+6
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-25drm/exynos/exynos7_drm_decon: Use platform_get_irq_byname() to get the interruptLad Prabhakar1-9/+3
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by: Lad Prabhakar <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2022-02-24clk: qcom: dispcc: Update the transition delay for MDSS GDSCTaniya Das3-3/+12
On SC7180 we observe black screens because the gdsc is being enabled/disabled very rapidly and the GDSC FSM state does not work as expected. This is due to the fact that the GDSC reset value is being updated from SW. The recommended transition delay for mdss core gdsc updated for SC7180/SC7280/SM8250. Fixes: dd3d06622138 ("clk: qcom: Add display clock controller driver for SC7180") Fixes: 1a00c962f9cd ("clk: qcom: Add display clock controller driver for SC7280") Fixes: 80a18f4a8567 ("clk: qcom: Add display clock controller driver for SM8150 and SM8250") Signed-off-by: Taniya Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bjorn Andersson <[email protected]> [[email protected]: lowercase hex] Signed-off-by: Stephen Boyd <[email protected]>
2022-02-24clk: qcom: gdsc: Add support to update GDSC transition delayTaniya Das2-6/+28
GDSCs have multiple transition delays which are used for the GDSC FSM states. Older targets/designs required these values to be updated from gdsc code to certain default values for the FSM state to work as expected. But on the newer targets/designs the values updated from the GDSC driver can hamper the FSM state to not work as expected. On SC7180 we observe black screens because the gdsc is being enabled/disabled very rapidly and the GDSC FSM state does not work as expected. This is due to the fact that the GDSC reset value is being updated from SW. Thus add support to update the transition delay from the clock controller gdscs as required. Fixes: 45dd0e55317cc ("clk: qcom: Add support for GDSCs) Signed-off-by: Taniya Das <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2022-02-24Merge tag 'perf-tools-fixes-for-v5.17-2022-02-24' of ↵Linus Torvalds5-21/+8
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix double free in in the error path when opening perf.data from multiple files in a directory instead of from a single file - Sync the msr-index.h copy with the kernel sources - Fix error when printing 'weight' field in 'perf script' - Skip failing sigtrap test for arm+aarch64 in 'perf test' - Fix failure to use a cpu list for uncore events in hybrid systems, e.g. Intel Alder Lake * tag 'perf-tools-fixes-for-v5.17-2022-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf script: Fix error when printing 'weight' field tools arch x86: Sync the msr-index.h copy with the kernel sources perf data: Fix double free in perf_session__delete() perf evlist: Fix failed to use cpu list for uncore events perf test: Skip failing sigtrap test for arm+aarch64
2022-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds11-18/+86
Pull kvm fixes from Paolo Bonzini: "x86 host: - Expose KVM_CAP_ENABLE_CAP since it is supported - Disable KVM_HC_CLOCK_PAIRING in TSC catchup mode - Ensure async page fault token is nonzero - Fix lockdep false negative - Fix FPU migration regression from the AMX changes x86 guest: - Don't use PV TLB/IPI/yield on uniprocessor guests PPC: - reserve capability id (topic branch for ppc/kvm)" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non default value when tsc scaling disabled KVM: x86/mmu: make apf token non-zero to fix bug KVM: PPC: reserve capability 210 for KVM_CAP_PPC_AIL_MODE_3 x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU x86/kvm: Fix compilation warning in non-x86_64 builds x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0 x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0 kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode KVM: Fix lockdep false negative during host resume KVM: x86: Add KVM_CAP_ENABLE_CAP to x86
2022-02-24Merge tag 'imx-fixes-5.17-2' of ↵Arnd Bergmann246-811/+1611
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.17, round 2: - Drop reset signal from i.MX8MM vpumix power domain to fix a system hang. - Fix a dtbs_check warning caused by #thermal-sensor-cells in i.MX8ULP device tree. - Fix a clock disabling imbalance in gpcv2 driver. Signed-off-by: Arnd Bergmann <[email protected]>
2022-02-24Merge tag 'tegra-for-5.17-arm-dt-fixes' of ↵Arnd Bergmann3-19/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes ARM: tegra: Device tree fixes for v5.17-rc6 This contains fixes for the eDP panel found on the Venice 2 and Nyan boards. * tag 'tegra-for-5.17-arm-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: Move panels to AUX bus Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-02-24Merge tag 'v5.17-rockchip-dtsfixes1' of ↵Arnd Bergmann11-21/+45
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fix the display-port-sound on Gru devices, DDR voltage on the Quartz-A board, fix emmc signal-integrity and usb OTG mode on rk3399-puma as well as a number of dtschema fixes to make the reduce the number of errors. * tag 'v5.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: fix a typo on rk3288 crypto-controller ARM: dts: rockchip: reorder rk322x hmdi clocks arm64: dts: rockchip: reorder rk3399 hdmi clocks arm64: dts: rockchip: align pl330 node name with dtschema arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity arm64: dts: rockchip: fix Quartz64-A ddr regulator voltage arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568 arm64: dts: rockchip: fix dma-controller node names on rk356x Link: https://lore.kernel.org/r/1973741.CViHJPHrxy@phil Signed-off-by: Arnd Bergmann <[email protected]>
2022-02-24Merge tag 'pci-v5.17-fixes-5' of ↵Linus Torvalds2-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fixes from Bjorn Helgaas: - Fix a merge error that broke PCI device enumeration on mvebu platforms, including Turris Omnia (Armada 385) (Pali Rohár) - Avoid using ATS on all AMD Navi10 and Navi14 GPUs because some VBIOSes don't account for "harvested" (disabled) parts of the chip when initializing caches (Alex Deucher) * tag 'pci-v5.17-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken PCI: mvebu: Fix device enumeration regression
2022-02-24Merge tag 'net-5.17-rc6' of ↵Linus Torvalds99-439/+990
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. Current release - regressions: - bpf: fix crash due to out of bounds access into reg2btf_ids - mvpp2: always set port pcs ops, avoid null-deref - eth: marvell: fix driver load from initrd - eth: intel: revert "Fix reset bw limit when DCB enabled with 1 TC" Current release - new code bugs: - mptcp: fix race in overlapping signal events Previous releases - regressions: - xen-netback: revert hotplug-status changes causing devices to not be configured - dsa: - avoid call to __dev_set_promiscuity() while rtnl_mutex isn't held - fix panic when removing unoffloaded port from bridge - dsa: microchip: fix bridging with more than two member ports Previous releases - always broken: - bpf: - fix crash due to incorrect copy_map_value when both spin lock and timer are present in a single value - fix a bpf_timer initialization issue with clang - do not try bpf_msg_push_data with len 0 - add schedule points in batch ops - nf_tables: - unregister flowtable hooks on netns exit - correct flow offload action array size - fix a couple of memory leaks - vsock: don't check owner in vhost_vsock_stop() while releasing - gso: do not skip outer ip header in case of ipip and net_failover - smc: use a mutex for locking "struct smc_pnettable" - openvswitch: fix setting ipv6 fields causing hw csum failure - mptcp: fix race in incoming ADD_ADDR option processing - sysfs: add check for netdevice being present to speed_show - sched: act_ct: fix flow table lookup after ct clear or switching zones - eth: intel: fixes for SR-IOV forwarding offloads - eth: broadcom: fixes for selftests and error recovery - eth: mellanox: flow steering and SR-IOV forwarding fixes Misc: - make __pskb_pull_tail() & pskb_carve_frag_list() drop_monitor friends not report freed skbs as drops - force inlining of checksum functions in net/checksum.h" * tag 'net-5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits) net: mv643xx_eth: process retval from of_get_mac_address ping: remove pr_err from ping_lookup Revert "i40e: Fix reset bw limit when DCB enabled with 1 TC" openvswitch: Fix setting ipv6 fields causing hw csum failure ipv6: prevent a possible race condition with lifetimes net/smc: Use a mutex for locking "struct smc_pnettable" bnx2x: fix driver load from initrd Revert "xen-netback: Check for hotplug-status existence before watching" Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" net/mlx5e: Fix VF min/max rate parameters interchange mistake net/mlx5e: Add missing increment of count net/mlx5e: MPLSoUDP decap, fix check for unsupported matches net/mlx5e: Fix MPLSoUDP encap to use MPLS action information net/mlx5e: Add feature check for set fec counters net/mlx5e: TC, Skip redundant ct clear actions net/mlx5e: TC, Reject rules with forward and drop actions net/mlx5e: TC, Reject rules with drop and modify hdr action net/mlx5e: kTLS, Use CHECKSUM_UNNECESSARY for device-offloaded packets net/mlx5e: Fix wrong return value on ioctl EEPROM query failure net/mlx5: Fix possible deadlock on rule deletion ...
2022-02-24Bluetooth: hci_sync: Fix not using conn_timeoutLuiz Augusto von Dentz2-6/+23
When using hci_le_create_conn_sync it shall wait for the conn_timeout since the connection complete may take longer than just 2 seconds. Also fix the masking of HCI_EV_LE_ENHANCED_CONN_COMPLETE and HCI_EV_LE_CONN_COMPLETE so they are never both set so we can predict which one the controller will use in case of HCI_OP_LE_CREATE_CONN. Fixes: 6cd29ec6ae5e3 ("Bluetooth: hci_sync: Wait for proper events when connecting LE") Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2022-02-24Bluetooth: hci_sync: Fix hci_update_accept_list_syncLuiz Augusto von Dentz1-1/+4
hci_update_accept_list_sync is returning the filter based on the error but that gets overwritten by hci_le_set_addr_resolution_enable_sync return instead of using the actual result of the likes of hci_le_add_accept_list_sync which was intended. Fixes: ad383c2c65a5b ("Bluetooth: hci_sync: Enable advertising when LL privacy is enabled") Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2022-02-24Bluetooth: assign len after null checkWang Qing1-1/+2
len should be assigned after a null check Signed-off-by: Wang Qing <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2022-02-24Bluetooth: Fix bt_skb_sendmmsg not allocating partial chunksLuiz Augusto von Dentz1-2/+1
Since bt_skb_sendmmsg can be used with the likes of SOCK_STREAM it shall return the partial chunks it could allocate instead of freeing everything as otherwise it can cause problems like bellow. Fixes: 81be03e026dc ("Bluetooth: RFCOMM: Replace use of memcpy_from_msg with bt_skb_sendmmsg") Reported-by: Paul Menzel <[email protected]> Link: https://lore.kernel.org/r/[email protected] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215594 Signed-off-by: Luiz Augusto von Dentz <[email protected]> Tested-by: Paul Menzel <[email protected]> (Nokia N9 (MeeGo/Harmattan) Signed-off-by: Marcel Holtmann <[email protected]>
2022-02-24Bluetooth: fix data races in smp_unregister(), smp_del_chan()Lin Ma1-2/+2
Previous commit e04480920d1e ("Bluetooth: defer cleanup of resources in hci_unregister_dev()") defers all destructive actions to hci_release_dev() to prevent cocurrent problems like NPD, UAF. However, there are still some exceptions that are ignored. The smp_unregister() in hci_dev_close_sync() (previously in hci_dev_do_close) will release resources like the sensitive channel and the smp_dev objects. Consider the situations the device is detaching or power down while the kernel is still operating on it, the following data race could take place. thread-A hci_dev_close_sync | thread-B read_local_oob_ext_data | hci_dev_unlock() | ... | hci_dev_lock() if (hdev->smp_data) | chan = hdev->smp_data | | chan = hdev->smp_data (3) | hdev->smp_data = NULL (1) | if (!chan || !chan->data) (4) ... | smp = chan->data | smp = chan->data if (smp) | chan->data = NULL (2) | ... | kfree_sensitive(smp) | | // dereference smp trigger UFA That is, the objects hdev->smp_data and chan->data both suffer from the data races. In a preempt-enable kernel, the above schedule (when (3) is before (1) and (4) is before (2)) leads to UAF bugs. It can be reproduced in the latest kernel and below is part of the report: [ 49.097146] ================================================================ [ 49.097611] BUG: KASAN: use-after-free in smp_generate_oob+0x2dd/0x570 [ 49.097611] Read of size 8 at addr ffff888006528360 by task generate_oob/155 [ 49.097611] [ 49.097611] Call Trace: [ 49.097611] <TASK> [ 49.097611] dump_stack_lvl+0x34/0x44 [ 49.097611] print_address_description.constprop.0+0x1f/0x150 [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] kasan_report.cold+0x7f/0x11b [ 49.097611] ? smp_generate_oob+0x2dd/0x570 [ 49.097611] smp_generate_oob+0x2dd/0x570 [ 49.097611] read_local_oob_ext_data+0x689/0xc30 [ 49.097611] ? hci_event_packet+0xc80/0xc80 [ 49.097611] ? sysvec_apic_timer_interrupt+0x9b/0xc0 [ 49.097611] ? asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 49.097611] ? mgmt_init_hdev+0x1c/0x240 [ 49.097611] ? mgmt_init_hdev+0x28/0x240 [ 49.097611] hci_sock_sendmsg+0x1880/0x1e70 [ 49.097611] ? create_monitor_event+0x890/0x890 [ 49.097611] ? create_monitor_event+0x890/0x890 [ 49.097611] sock_sendmsg+0xdf/0x110 [ 49.097611] __sys_sendto+0x19e/0x270 [ 49.097611] ? __ia32_sys_getpeername+0xa0/0xa0 [ 49.097611] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 49.097611] __x64_sys_sendto+0xd8/0x1b0 [ 49.097611] ? syscall_exit_to_user_mode+0x1d/0x40 [ 49.097611] do_syscall_64+0x3b/0x90 [ 49.097611] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 49.097611] RIP: 0033:0x7f5a59f51f64 ... [ 49.097611] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5a59f51f64 [ 49.097611] RDX: 0000000000000007 RSI: 00007f5a59d6ac70 RDI: 0000000000000006 [ 49.097611] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 49.097611] R10: 0000000000000040 R11: 0000000000000246 R12: 00007ffec26916ee [ 49.097611] R13: 00007ffec26916ef R14: 00007f5a59d6afc0 R15: 00007f5a59d6b700 To solve these data races, this patch places the smp_unregister() function in the protected area by the hci_dev_lock(). That is, the smp_unregister() function can not be concurrently executed when operating functions (most of them are mgmt operations in mgmt.c) hold the device lock. This patch is tested with kernel LOCK DEBUGGING enabled. The price from the extended holding time of the device lock is supposed to be low as the smp_unregister() function is fairly short and efficient. Signed-off-by: Lin Ma <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2022-02-24Bluetooth: hci_core: Fix leaking sent_cmd skbLuiz Augusto von Dentz1-0/+1
sent_cmd memory is not freed before freeing hci_dev causing it to leak it contents. Signed-off-by: Luiz Augusto von Dentz <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2022-02-25Merge tag 'drm-intel-fixes-2022-02-24' of ↵Dave Airlie5-24/+52
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix QGV handling on ADL-P+ (Ville Syrjälä) - Fix bw atomic check when switching between SAGV vs. no SAGV (Ville Syrjälä) - Disconnect PHYs left connected by BIOS on disabled ports (Imre Deak) - Fix SAVG to no SAGV transitions on TGL+ (Ville Syrjälä) - Print PHY name properly on calibration error (DG2) (Matt Roper) Signed-off-by: Dave Airlie <[email protected]> From: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/YhdyHwRWkOTWwlqi@tursulin-mobl2
2022-02-24Merge tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-blockLinus Torvalds4-25/+60
Pull block fixes from Jens Axboe: - NVMe pull request: - send H2CData PDUs based on MAXH2CDATA (Varun Prakash) - fix passthrough to namespaces with unsupported features (Christoph Hellwig) - Clear iocb->private at poll completion (Stefano) * tag 'block-5.17-2022-02-24' of git://git.kernel.dk/linux-block: nvme-tcp: send H2CData PDUs based on MAXH2CDATA nvme: also mark passthrough-only namespaces ready in nvme_update_ns_info nvme: don't return an error from nvme_configure_metadata block: clear iocb->private in blkdev_bio_end_io_async()
2022-02-24thermal: int340x: fix memory leak in int3400_notify()Chuansheng Liu1-0/+4
It is easy to hit the below memory leaks in my TigerLake platform: unreferenced object 0xffff927c8b91dbc0 (size 32): comm "kworker/0:2", pid 112, jiffies 4294893323 (age 83.604s) hex dump (first 32 bytes): 4e 41 4d 45 3d 49 4e 54 33 34 30 30 20 54 68 65 NAME=INT3400 The 72 6d 61 6c 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b a5 rmal.kkkkkkkkkk. backtrace: [<ffffffff9c502c3e>] __kmalloc_track_caller+0x2fe/0x4a0 [<ffffffff9c7b7c15>] kvasprintf+0x65/0xd0 [<ffffffff9c7b7d6e>] kasprintf+0x4e/0x70 [<ffffffffc04cb662>] int3400_notify+0x82/0x120 [int3400_thermal] [<ffffffff9c8b7358>] acpi_ev_notify_dispatch+0x54/0x71 [<ffffffff9c88f1a7>] acpi_os_execute_deferred+0x17/0x30 [<ffffffff9c2c2c0a>] process_one_work+0x21a/0x3f0 [<ffffffff9c2c2e2a>] worker_thread+0x4a/0x3b0 [<ffffffff9c2cb4dd>] kthread+0xfd/0x130 [<ffffffff9c201c1f>] ret_from_fork+0x1f/0x30 Fix it by calling kfree() accordingly. Fixes: 38e44da59130 ("thermal: int3400_thermal: process "thermal table changed" event") Signed-off-by: Chuansheng Liu <[email protected]> Cc: 4.14+ <[email protected]> # 4.14+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-02-24Merge tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-blockLinus Torvalds1-7/+17
Pull io_uring fixes from Jens Axboe: - Add a conditional schedule point in io_add_buffers() (Eric) - Fix for a quiesce speedup merged in this release (Dylan) - Don't convert to jiffies for event timeout waiting, it's way too coarse when we accept a timespec as input (me) * tag 'io_uring-5.17-2022-02-23' of git://git.kernel.dk/linux-block: io_uring: disallow modification of rsrc_data during quiesce io_uring: don't convert to jiffies for waiting on timeouts io_uring: add a schedule point in io_add_buffers()
2022-02-24Merge branch 'cpufreq/arm/fixes' of ↵Rafael J. Wysocki5-1/+22
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull ARM cpufreq fixes for 5.18-rc6 from Viresh Kumar: "This fixes issues related to throttle IRQ for Qcom SoCs." * 'cpufreq/arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qcom-hw: Delay enabling throttle_irq cpufreq: Reintroduce ready() callback
2022-02-24Merge tag 'platform-drivers-x86-v5.17-4' of ↵Linus Torvalds2-12/+43
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull more x86 platform driver fixes from Hans de Goede: "Two more fixes: - Fix suspend/resume regression on AMD Cezanne APUs in >= 5.16 - Fix Microsoft Surface 3 battery readings" * tag 'platform-drivers-x86-v5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: surface: surface3_power: Fix battery readings on batteries without a serial number platform/x86: amd-pmc: Set QOS during suspend on CZN w/ timer wakeup
2022-02-24net: mv643xx_eth: process retval from of_get_mac_addressMauri Sandberg1-10/+14
Obtaining a MAC address may be deferred in cases when the MAC is stored in an NVMEM block, for example, and it may not be ready upon the first retrieval attempt and return EPROBE_DEFER. It is also possible that a port that does not rely on NVMEM has been already created when getting the defer request. Thus, also the resources allocated previously must be freed when doing a roll-back. Fixes: 76723bca2802 ("net: mv643xx_eth: add DT parsing support") Signed-off-by: Mauri Sandberg <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-24KVM: x86: nSVM: disallow userspace setting of MSR_AMD64_TSC_RATIO to non ↵Maxim Levitsky1-2/+17
default value when tsc scaling disabled If nested tsc scaling is disabled, MSR_AMD64_TSC_RATIO should never have non default value. Due to way nested tsc scaling support was implmented in qemu, it would set this msr to 0 when nested tsc scaling was disabled. Ignore that value for now, as it causes no harm. Fixes: 5228eb96a487 ("KVM: x86: nSVM: implement nested TSC scaling") Cc: [email protected] Signed-off-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-24KVM: x86/mmu: make apf token non-zero to fix bugLiang Zhang1-1/+12
In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000 Signed-off-by: Liang Zhang <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-02-24ping: remove pr_err from ping_lookupXin Long1-1/+0
As Jakub noticed, prints should be avoided on the datapath. Also, as packets would never come to the else branch in ping_lookup(), remove pr_err() from ping_lookup(). Fixes: 35a79e64de29 ("ping: fix the dif and sdif check in ping_lookup") Reported-by: Jakub Kicinski <[email protected]> Signed-off-by: Xin Long <[email protected]> Link: https://lore.kernel.org/r/1ef3f2fcd31bd681a193b1fcf235eee1603819bd.1645674068.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.