aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-03-14wifi: rtw88: SDIO device driver for RTL8723CSFiona Klute4-0/+59
This driver uses the new rtw8703b chip driver code. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For SDIO Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-10-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Reset 8703b firmware before downloadFiona Klute1-0/+6
Sometimes 8703b firmware is still active from previous use when the driver needs to download the firmware during MAC activation. Reset it in that case. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-9-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Add rtw8703b_tables.cFiona Klute1-0/+902
Initialization tables for rtw8703b: Initial register values and TX power limits. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-8-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Add rtw8703b_tables.hFiona Klute1-0/+14
Initialization table definitions for rtw8703b. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-7-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Add rtw8703b.cFiona Klute1-0/+2109
This is the main source for the new rtw88_8703b chip driver. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-6-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Add rtw8703b.hFiona Klute1-0/+102
This is the main header for the new rtw88_8703b chip driver. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-5-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Add definitions for 8703b chipFiona Klute3-0/+16
default_cck_index is used in power track, the rx_cck_agc_report_type for RX PHY status. GET_RX_DESC_BW is an RX descriptor field not used by the other chip drivers. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-4-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Debug output for rtw8723x EFUSEFiona Klute2-0/+170
Some 8703b chips contain invalid EFUSE data, getting detailed information is critical when analyzing issues caused by that. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-3-fiona.klute@gmx.de
2024-03-14wifi: rtw88: Shared module for rtw8723x devicesFiona Klute6-900/+1107
The already supported 8723d chip is very similar to 8703b/8723cs, split code that can be shared into a new module. The spec definition tables are combined into a struct so we only need one EXPORT_SYMBOL for them all. Acked-by: Ping-Ke Shih <pkshih@realtek.com> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Fiona Klute <fiona.klute@gmx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240311103735.615541-2-fiona.klute@gmx.de
2024-03-14wifi: rtw89: 8922a: add 8922ae to Makefile and KconfigPing-Ke Shih2-1/+26
Add 8922AE to Makefile and Kconfig. Currently, it can support STA, AP and monitor modes with good performance. Implemented initial BT-coexistence function only, and will to fine tune this component. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-7-pkshih@realtek.com
2024-03-14wifi: rtw89: 8922a: update chip parameter for coexChing-Te Ku1-0/+149
Implement the chip operation function for 8922a, it related to TX power, RX gain, antenna position, packet priority and so on. Also assign coexistence priority table for hardware PTA using. Add settings to avoid uncertainties propagation when Wi-Fi Rx due to RF gain mismatch. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-6-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: Add TDMA slot parameter setting version 7Ching-Te Ku3-80/+304
In order to packet up the slots information, the TLV header has updated. TDMA slot parameters also use the TLV header to packet up to H2C, so upgrade to version 7. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-5-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: Add TDMA version 7Ching-Te Ku1-2/+18
In order to packet up the slots information, the TLV header has updated. TDMA also use the TLV header to packet up to H2C, so upgrade to version 7. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-4-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: Add antenna setting function for RTL8922AChing-Te Ku3-2/+197
Because there is new hardware structure and Wi-Fi 7 protocol, the antenna settings need to concern more complex for Wi-Fi 7 using. The antenna setting included grant control signal, they decide which MAC/Port or Bluetooth can do traffic. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-3-pkshih@realtek.com
2024-03-14wifi: rtw89: coex: Add WiFi role info format version 8Ching-Te Ku6-25/+590
In order to control the hardware band and related protocol control, add version 8 format and related logic to control the mechanism. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240312013721.17452-2-pkshih@realtek.com
2024-03-14ssb: use "break" on default case to prevent warningRandy Dunlap1-0/+1
Having an empty default: case in a switch statement causes a warning (when using Clang; I don't see the warning when using gcc), so add a "break;" to the default case to prevent the warning: drivers/ssb/main.c:1149:2: warning: label at end of compound statement is a C2x extension [-Wc2x-extensions] Fixes: e27b02e23a70 ("ssb: drop use of non-existing CONFIG_SSB_DEBUG symbol") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202403130717.TWm17FiD-lkp@intel.com/ Cc: Michael Büsch <m@bues.ch> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@kernel.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: llvm@lists.linux.dev Acked-by: Michael Büsch <m@bues.ch> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240313001305.18820-1-rdunlap@infradead.org
2024-03-12ssb: drop use of non-existing CONFIG_SSB_DEBUG symbolRandy Dunlap2-9/+0
CONFIG_SSB_DEBUG is used in one header file and nowhere else, so remove it and the now-empty inline function that contained it. Also remove the call to the empty inline function. The empty "default:" case is kept to prevent 2 compiler warnings: drivers/ssb/main.c:1133:9: warning: enumeration value 'SSB_BUSTYPE_PCMCIA' not handled in switch [-Wswitch] drivers/ssb/main.c:1133:9: warning: enumeration value 'SSB_BUSTYPE_SDIO' not handled in switch [-Wswitch] Reported-by: Ying Sun <sunying@isrc.iscas.ac.cn> Link: https://lore.kernel.org/lkml/4e8525fe.607e2.18a8ddfdce8.Coremail.sunying@isrc.iscas.ac.cn/ Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Michael Büsch <m@bues.ch> Cc: linux-wireless@vger.kernel.org Cc: Kalle Valo <kvalo@kernel.org> Acked-by: Michael Büsch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240309224540.22682-1-rdunlap@infradead.org
2024-03-12dt-bindings: net: wireless: brcm,bcm4329-fmac: Add CYW43439 DT bindingMarek Vasut1-0/+1
CYW43439 is a Wi-Fi + Bluetooth combo device from Infineon. The WiFi part is capable of 802.11 b/g/n. This chip is present e.g. on muRata 1YN module. Extend the binding with its DT compatible. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240309031355.269835-1-marex@denx.de
2024-03-12bcma: convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/a92e4b2f7aace64a1e3a91af7974a6982700a18f.1709886922.git.u.kleine-koenig@pengutronix.de
2024-03-12wifi: brcmfmac: pcie: handle randbuf allocation failureDuoming Zhou1-5/+10
The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow. Fixes: 91918ce88d9f ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240306140437.18177-1-duoming@zju.edu.cn
2024-03-12ssb: Fix potential NULL pointer dereference in ssb_device_uevent()Rand Deeb1-1/+3
The ssb_device_uevent() function first attempts to convert the 'dev' pointer to 'struct ssb_device *'. However, it mistakenly dereferences 'dev' before performing the NULL check, potentially leading to a NULL pointer dereference if 'dev' is NULL. To fix this issue, move the NULL check before dereferencing the 'dev' pointer, ensuring that the pointer is valid before attempting to use it. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Rand Deeb <rand.sec96@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240306123028.164155-1-rand.sec96@gmail.com
2024-03-12wifi: rtw89: Correct EHT TX rate on 20MHz connectionDian-Syuan Yang1-4/+9
We used EHT capability of 20MHz-only as rate mask to RA (rate adaptive) H2C command when connecting with AP set EHT 20MHz. It would get the wrong rate mask and the MCS rate can only reach MCS11. According to the description of 802.11be spec, if all supported channel bandwidth field of HE PHY capabilities are zero, then the EHT capability of 20MHz-only is valid. As a result, we adjust the code to set correct rate mask based on HE PHY bandwidth capability. Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240305004502.6655-1-pkshih@realtek.com
2024-03-11Merge branch 'qmc-hdlc'David S. Miller6-0/+960
Herve Codina says: ==================== Add support for QMC HDLC This series introduces the QMC HDLC support. Patches were previously sent as part of a full feature series and were previously reviewed in that context: "Add support for QMC HDLC, framer infrastructure and PEF2256 framer" [1] In order to ease the merge, the full feature series has been split and needed parts were merged in v6.8-rc1: - "Prepare the PowerQUICC QMC and TSA for the HDLC QMC driver" [2] - "Add support for framer infrastructure and PEF2256 framer" [3] This series contains patches related to the QMC HDLC part (QMC HDLC driver): - Introduce the QMC HDLC driver (patches 1 and 2) - Add timeslots change support in QMC HDLC (patch 3) - Add framer support as a framer consumer in QMC HDLC (patch 4) Compare to the original full feature series, a modification was done on patch 3 in order to use a coherent prefix in the commit title. I kept the patches unsquashed as they were previously sent and reviewed. Of course, I can squash them if needed. Compared to the previous iteration: https://lore.kernel.org/linux-kernel/20240306080726.167338-1-herve.codina@bootlin.com/ this v7 series mainly: - Rename a variable. - Fix reverse xmas tree declarations. - Add 'Acked-by' tag. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-11net: wan: fsl_qmc_hdlc: Add framer supportHerve Codina1-5/+234
Add framer support in the fsl_qmc_hdlc driver in order to be able to signal carrier changes to the network stack based on the framer status Also use this framer to provide information related to the E1/T1 line interface on IF_GET_IFACE and configure the line interface according to IF_IFACE_{E1,T1} information. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-11net: wan: fsl_qmc_hdlc: Add runtime timeslots changes supportHerve Codina1-1/+150
QMC channels support runtime timeslots changes but nothing is done at the QMC HDLC driver to handle these changes. Use existing IFACE ioctl in order to configure the timeslots to use. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-11lib/bitmap: Introduce bitmap_scatter() and bitmap_gather() helpersAndy Shevchenko2-0/+143
These helpers scatters or gathers a bitmap with the help of the mask position bits parameter. bitmap_scatter() does the following: src: 0000000001011010 |||||| +------+||||| | +----+|||| | |+----+||| | || +-+|| | || | || mask: ...v..vv...v..vv ...0..11...0..10 dst: 0000001100000010 and bitmap_gather() performs this one: mask: ...v..vv...v..vv src: 0000001100000010 ^ ^^ ^ 0 | || | 10 | || > 010 | |+--> 1010 | +--> 11010 +----> 011010 dst: 0000000000011010 bitmap_gather() can the seen as the reverse bitmap_scatter() operation. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/lkml/20230926052007.3917389-3-andriy.shevchenko@linux.intel.com/ Co-developed-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Herve Codina <herve.codina@bootlin.com> Acked-by: Yury Norov <yury.norov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-11MAINTAINERS: Add the Freescale QMC HDLC driver entryHerve Codina1-0/+7
After contributing the driver, add myself as the maintainer for the Freescale QMC HDLC driver. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-11net: wan: Add support for QMC HDLCHerve Codina3-0/+432
The QMC HDLC driver provides support for HDLC using the QMC (QUICC Multichannel Controller) to transfer the HDLC data. Signed-off-by: Herve Codina <herve.codina@bootlin.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-11Merge branch '100GbE' of ↵David S. Miller5-9/+210
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ethtool: ice: Support for RSS settings to GTP Takeru Hayasaka enables RSS functionality for GTP packets on ice driver with ethtool. A user can include TEID and make RSS work for GTP-U over IPv4 by doing the following:`ethtool -N ens3 rx-flow-hash gtpu4 sde` In addition to gtpu(4|6), we now support gtpc(4|6),gtpc(4|6)t,gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d. gtpc(4|6): Used for GTP-C in IPv4 and IPv6, where the GTP header format does not include a TEID. gtpc(4|6)t: Used for GTP-C in IPv4 and IPv6, with a GTP header format that includes a TEID. gtpu(4|6): Used for GTP-U in both IPv4 and IPv6 scenarios. gtpu(4|6)e: Used for GTP-U with extended headers in both IPv4 and IPv6. gtpu(4|6)u: Used when the PSC (PDU session container) in the GTP-U extended header includes Uplink, applicable to both IPv4 and IPv6. gtpu(4|6)d: Used when the PSC in the GTP-U extended header includes Downlink, for both IPv4 and IPv6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08Merge tag 'mlx5-socket-direct-v3' of ↵Jakub Kicinski34-173/+1168
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Support Multi-PF netdev (Socket Direct) This series adds support for combining multiple devices (PFs) of the same port under one netdev instance. Passing traffic through different devices belonging to different NUMA sockets saves cross-numa traffic and allows apps running on the same netdev from different numas to still feel a sense of proximity to the device and achieve improved performance. We achieve this by grouping PFs together, and creating the netdev only once all group members are probed. Symmetrically, we destroy the netdev once any of the PFs is removed. The channels are distributed between all devices, a proper configuration would utilize the correct close numa when working on a certain app/cpu. We pick one device to be a primary (leader), and it fills a special role. The other devices (secondaries) are disconnected from the network in the chip level (set to silent mode). All RX/TX traffic is steered through the primary to/from the secondaries. Currently, we limit the support to PFs only, and up to two devices (sockets). * tag 'mlx5-socket-direct-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: Documentation: networking: Add description for multi-pf netdev net/mlx5: Enable SD feature net/mlx5e: Block TLS device offload on combined SD netdev net/mlx5e: Support per-mdev queue counter net/mlx5e: Support cross-vhca RSS net/mlx5e: Let channels be SD-aware net/mlx5e: Create EN core HW resources for all secondary devices net/mlx5e: Create single netdev per SD group net/mlx5: SD, Add debugfs net/mlx5: SD, Add informative prints in kernel log net/mlx5: SD, Implement steering for primary and secondaries net/mlx5: SD, Implement devcom communication and primary election net/mlx5: SD, Implement basic query and instantiation net/mlx5: SD, Introduce SD lib net/mlx5: Add MPIR bit in mcam_access_reg ==================== Link: https://lore.kernel.org/r/20240307084229.500776-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08Merge tag 'for-net-next-2024-03-08' of ↵Jakub Kicinski38-3623/+1028
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Luiz Augusto von Dentz says: ==================== bluetooth-next pull request for net-next: - hci_conn: Only do ACL connections sequentially - hci_core: Cancel request on command timeout - Remove CONFIG_BT_HS - btrtl: Add the support for RTL8852BT/RTL8852BE-VT - btusb: Add support Mediatek MT7920 - btusb: Add new VID/PID 13d3/3602 for MT7925 - Add new quirk for broken read key length on ATS2851 * tag 'for-net-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (52 commits) Bluetooth: hci_sync: Fix UAF in hci_acl_create_conn_sync Bluetooth: Fix eir name length Bluetooth: ISO: Align broadcast sync_timeout with connection timeout Bluetooth: Add new quirk for broken read key length on ATS2851 Bluetooth: mgmt: remove NULL check in add_ext_adv_params_complete() Bluetooth: mgmt: remove NULL check in mgmt_set_connectable_complete() Bluetooth: btusb: Add support Mediatek MT7920 Bluetooth: btmtk: Add MODULE_FIRMWARE() for MT7922 Bluetooth: btnxpuart: Fix btnxpuart_close Bluetooth: ISO: Clean up returns values in iso_connect_ind() Bluetooth: fix use-after-free in accessing skb after sending it Bluetooth: af_bluetooth: Fix deadlock Bluetooth: bnep: Fix out-of-bound access Bluetooth: btusb: Fix memory leak Bluetooth: msft: Fix memory leak Bluetooth: hci_core: Fix possible buffer overflow Bluetooth: btrtl: fix out of bounds memory access Bluetooth: hci_h5: Add ability to allocate memory for private data Bluetooth: hci_sync: Fix overwriting request callback Bluetooth: hci_sync: Use QoS to determine which PHY to scan ... ==================== Link: https://lore.kernel.org/r/20240308181056.120547-1-luiz.dentz@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08Merge tag 'ieee802154-for-net-next-2024-03-07' of ↵Jakub Kicinski8-23/+24
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next Stefan Schmidt says: ==================== pull-request: ieee802154-next 2024-03-07 Various cross tree patches for ieee802154v drivers and a resource leak fix for ieee802154 llsec. Andy Shevchenko changed GPIO header usage for at86rf230 and mcr20a to only include needed headers. Bo Liu converted the at86rf230, mcr20a and mrf24j40 driver regmap support to use the maple tree register cache. Fedor Pchelkin fixed a resource leak in the llsec key deletion path. Ricardo B. Marliere made wpan_phy_class const. Tejun Heo removed WQ_UNBOUND from a workqueue call in ca8210. * tag 'ieee802154-for-net-next-2024-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next: ieee802154: cfg802154: make wpan_phy_class constant ieee802154: mcr20a: Remove unused of_gpio.h ieee802154: at86rf230: Replace of_gpio.h by proper one mac802154: fix llsec key resources release in mac802154_llsec_key_del ieee802154: ca8210: Drop spurious WQ_UNBOUND from alloc_ordered_workqueue() call net: ieee802154: mrf24j40: convert to use maple tree register cache net: ieee802154: mcr20a: convert to use maple tree register cache net: ieee802154: at86rf230: convert to use maple tree register cache ==================== Link: https://lore.kernel.org/r/20240307195105.292085-1-stefan@datenfreihafen.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08tools: ynl: Fix spelling mistake "Constructred" -> "Constructed"Colin Ian King1-1/+1
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20240308084458.2045266-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08ipv4: raw: check sk->sk_rcvbuf earlierEric Dumazet1-0/+7
There is no point cloning an skb and having to free the clone if the receive queue of the raw socket is full. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240307163020.2524409-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08ipv6: raw: check sk->sk_rcvbuf earlierEric Dumazet1-0/+7
There is no point cloning an skb and having to free the clone if the receive queue of the raw socket is full. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20240307162943.2523817-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08nexthop: Simplify dump error handlingIdo Schimmel1-9/+0
The only error that can happen during a nexthop dump is insufficient space in the skb caring the netlink messages (EMSGSIZE). If this happens and some messages were already filled in, the nexthop code returns the skb length to signal the netlink core that more objects need to be dumped. After commit b5a899154aa9 ("netlink: handle EMSGSIZE errors in the core") there is no need to handle this error in the nexthop code as it is now handled in the core. Simplify the code and simply return the error to the core. No regressions in nexthop tests: # ./fib_nexthops.sh Tests passed: 234 Tests failed: 0 Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240307154727.3555462-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08net: add skb_data_unref() helperEric Dumazet2-3/+19
Similar to skb_unref(), add skb_data_unref() to save an expensive atomic operation (and cache line dirtying) when last reference on shinfo->dataref is released. I saw this opportunity on hosts with RAW sockets accidentally bound to UDP protocol, forcing an skb_clone() on all received packets. These RAW sockets had their receive queue full, so all clone packets were immediately dropped. When UDP recvmsg() consumes later the original skb, skb_release_data() is hitting atomic_sub_return() quite badly, because skb->clone has been set permanently. Note that this patch helps TCP TX performance, because TCP stack also use (fast) clones. This means that at least one of the two packets (the main skb or its clone) will no longer have to perform this atomic operation in skb_release_data(). Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240307123446.2302230-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08Merge tag 'wireless-next-2024-03-08' of ↵Jakub Kicinski132-1342/+3176
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The fourth "new features" pull request for v6.9 with changes both in stack and in drivers. The theme in this pull request is to fix sparse warnings but we still have some left in wireless subsystem. Otherwise quite normal. Major changes: rtw89 * NL80211_EXT_FEATURE_SCAN_RANDOM_SN support * NL80211_EXT_FEATURE_SET_SCAN_DWELL support rtw88 * support for more rtw8811cu and rtw8821cu devices mt76 * mt76x2u: add Netgear WNDA3100v3 USB * mt7915: newer ADIE version support * mt7925: radio temperature sensor support * mt7996: remove GCMP IGTK offload * tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits) wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode wifi: rtw89: wow: set security engine options for 802.11ax chips only wifi: rtw89: update suspend/resume for different generation wifi: rtw89: wow: update config mac function with different generation wifi: rtw89: update DMA function with different generation wifi: rtw89: wow: update WoWLAN status register for different generation wifi: rtw89: wow: update WoWLAN reason register for different chips wifi: brcm80211: handle pmk_op allocation failure wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR wifi: rtw89: coex: When Bluetooth not available don't set power/gain wifi: rtw89: coex: add return value to ensure H2C command is success or not wifi: rtw89: coex: Reorder H2C command index to align with firmware wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic wifi: rtw89: coex: add init_info H2C command format version 7 wifi: rtw89: 8922a: add coexistence helpers of SW grant wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt wifi: cw1200: restore endian swapping wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte wifi: rtw88: 8821c: Fix false alarm count ... ==================== Link: https://lore.kernel.org/r/20240308100429.B8EA2C433F1@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-08Bluetooth: hci_sync: Fix UAF in hci_acl_create_conn_syncLuiz Augusto von Dentz1-0/+3
This fixes the following error caused by hci_conn being freed while hcy_acl_create_conn_sync is pending: ================================================================== BUG: KASAN: slab-use-after-free in hci_acl_create_conn_sync+0xa7/0x2e0 Write of size 2 at addr ffff888002ae0036 by task kworker/u3:0/848 CPU: 0 PID: 848 Comm: kworker/u3:0 Not tainted 6.8.0-rc6-g2ab3e8d67fc1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> dump_stack_lvl+0x21/0x70 print_report+0xce/0x620 ? preempt_count_sub+0x13/0xc0 ? __virt_addr_valid+0x15f/0x310 ? hci_acl_create_conn_sync+0xa7/0x2e0 kasan_report+0xdf/0x110 ? hci_acl_create_conn_sync+0xa7/0x2e0 hci_acl_create_conn_sync+0xa7/0x2e0 ? __pfx_hci_acl_create_conn_sync+0x10/0x10 ? __pfx_lock_release+0x10/0x10 ? __pfx_hci_acl_create_conn_sync+0x10/0x10 hci_cmd_sync_work+0x138/0x1c0 process_one_work+0x405/0x800 ? __pfx_lock_acquire+0x10/0x10 ? __pfx_process_one_work+0x10/0x10 worker_thread+0x37b/0x670 ? __pfx_worker_thread+0x10/0x10 kthread+0x19b/0x1e0 ? kthread+0xfe/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2f/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 847: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 hci_conn_add+0xc6/0x970 hci_connect_acl+0x309/0x410 pair_device+0x4fb/0x710 hci_sock_sendmsg+0x933/0xef0 sock_write_iter+0x2c3/0x2d0 do_iter_readv_writev+0x21a/0x2e0 vfs_writev+0x21c/0x7b0 do_writev+0x14a/0x180 do_syscall_64+0x77/0x150 entry_SYSCALL_64_after_hwframe+0x6c/0x74 Freed by task 847: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0xfa/0x150 kfree+0xcb/0x250 device_release+0x58/0xf0 kobject_put+0xbb/0x160 hci_conn_del+0x281/0x570 hci_conn_hash_flush+0xfc/0x130 hci_dev_close_sync+0x336/0x960 hci_dev_close+0x10e/0x140 hci_sock_ioctl+0x14a/0x5c0 sock_ioctl+0x58a/0x5d0 __x64_sys_ioctl+0x480/0xf60 do_syscall_64+0x77/0x150 entry_SYSCALL_64_after_hwframe+0x6c/0x74 Fixes: 45340097ce6e ("Bluetooth: hci_conn: Only do ACL connections sequentially") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-03-08Bluetooth: Fix eir name lengthFrédéric Danis2-23/+8
According to Section 1.2 of Core Specification Supplement Part A the complete or short name strings are defined as utf8s, which should not include the trailing NULL for variable length array as defined in Core Specification Vol1 Part E Section 2.9.3. Removing the trailing NULL allows PTS to retrieve the random address based on device name, e.g. for SM/PER/KDU/BV-02-C, SM/PER/KDU/BV-08-C or GAP/BROB/BCST/BV-03-C. Fixes: f61851f64b17 ("Bluetooth: Fix append max 11 bytes of name to scan rsp data") Signed-off-by: Frédéric Danis <frederic.danis@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-03-08Merge branch 'hns3-fixes'David S. Miller13-22/+74
Jijie Shao says: ==================== There are some bugfix for the HNS3 ethernet driver There are some bugfix for the HNS3 ethernet driver ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: add checking for vf id of mailboxJian Shen1-3/+4
Add checking for vf id of mailbox, in order to avoid array out-of-bounds risk. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix port duplex configure error in IMP resetJie Wang1-1/+4
Currently, the mac port is fixed to configured as full dplex mode in hclge_mac_init() when driver initialization or reset restore. Users may change the mode to half duplex with ethtool, so it may cause the user configuration dropped after reset. To fix it, don't change the duplex mode when resetting. Fixes: 2d03eacc0b7e ("net: hns3: Only update mac configuation when necessary") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix reset timeout under full functions and queuesPeiyang Wang2-2/+2
The cmdq reset command times out when all VFs are enabled and the queue is full. The hardware processing time exceeds the timeout set by the driver. In order to avoid the above extreme situations, the driver extends the reset timeout to 1 second. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix delete tc fail issueJijie Shao5-0/+22
When the tc is removed during reset, hns3 driver will return a errcode. But kernel ignores this errcode, As a result, the driver status is inconsistent with the kernel status. This patch retains the deletion status when the deletion fails and continues to delete after the reset to ensure that the status of the driver is consistent with that of kernel. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix kernel crash when 1588 is received on HIP08 devicesYonglong Liu1-1/+1
The HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL, but the hardware can receive 1588 messages, and set the HNS3_RXD_TS_VLD_B bit, so, if match this case, the access of hdev->ptp->flags will cause a kernel crash: [ 5888.946472] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 [ 5888.946475] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 5889.266118] pc : hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.272612] lr : hclge_ptp_get_rx_hwts+0x34/0x170 [hclge] [ 5889.279101] sp : ffff800012c3bc50 [ 5889.283516] x29: ffff800012c3bc50 x28: ffff2040002be040 [ 5889.289927] x27: ffff800009116484 x26: 0000000080007500 [ 5889.296333] x25: 0000000000000000 x24: ffff204001c6f000 [ 5889.302738] x23: ffff204144f53c00 x22: 0000000000000000 [ 5889.309134] x21: 0000000000000000 x20: ffff204004220080 [ 5889.315520] x19: ffff204144f53c00 x18: 0000000000000000 [ 5889.321897] x17: 0000000000000000 x16: 0000000000000000 [ 5889.328263] x15: 0000004000140ec8 x14: 0000000000000000 [ 5889.334617] x13: 0000000000000000 x12: 00000000010011df [ 5889.340965] x11: bbfeff4d22000000 x10: 0000000000000000 [ 5889.347303] x9 : ffff800009402124 x8 : 0200f78811dfbb4d [ 5889.353637] x7 : 2200000000191b01 x6 : ffff208002a7d480 [ 5889.359959] x5 : 0000000000000000 x4 : 0000000000000000 [ 5889.366271] x3 : 0000000000000000 x2 : 0000000000000000 [ 5889.372567] x1 : 0000000000000000 x0 : ffff20400095c080 [ 5889.378857] Call trace: [ 5889.382285] hclge_ptp_get_rx_hwts+0x40/0x170 [hclge] [ 5889.388304] hns3_handle_bdinfo+0x324/0x410 [hns3] [ 5889.394055] hns3_handle_rx_bd+0x60/0x150 [hns3] [ 5889.399624] hns3_clean_rx_ring+0x84/0x170 [hns3] [ 5889.405270] hns3_nic_common_poll+0xa8/0x220 [hns3] [ 5889.411084] napi_poll+0xcc/0x264 [ 5889.415329] net_rx_action+0xd4/0x21c [ 5889.419911] __do_softirq+0x130/0x358 [ 5889.424484] irq_exit+0x134/0x154 [ 5889.428700] __handle_domain_irq+0x88/0xf0 [ 5889.433684] gic_handle_irq+0x78/0x2c0 [ 5889.438319] el1_irq+0xb8/0x140 [ 5889.442354] arch_cpu_idle+0x18/0x40 [ 5889.446816] default_idle_call+0x5c/0x1c0 [ 5889.451714] cpuidle_idle_call+0x174/0x1b0 [ 5889.456692] do_idle+0xc8/0x160 [ 5889.460717] cpu_startup_entry+0x30/0xfc [ 5889.465523] secondary_start_kernel+0x158/0x1ec [ 5889.470936] Code: 97ffab78 f9411c14 91408294 f9457284 (f9400c80) [ 5889.477950] SMP: stopping secondary CPUs [ 5890.514626] SMP: failed to stop secondary CPUs 0-69,71-95 [ 5890.522951] Starting crashdump kernel... Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: Disable SerDes serial loopback for HiLink H60Hao Lan5-3/+18
When the hilink version is H60, the serdes serial loopback test is not supported. This patch add hilink version detection. When the version is H60, the serdes serial loopback test will be disable. Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: add new 200G link modes for hisilicon deviceHao Lan2-11/+22
The hisilicon device now supports a new 200G link interface, which query from firmware in a new bit. Therefore, the HCLGE_SUPPORT_200G_R4_BIT capability bit has been added. The HCLGE_SUPPORT_200G_BIT has been renamed as HCLGE_SUPPORT_200G_R4_EXT_BIT, and the firmware has extended support for this mode. Fixes: ae6f010cb1a7 ("net: hns3: add support for 200G device") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08net: hns3: fix wrong judgment condition issueJijie Shao1-1/+1
In hns3_dcbnl_ieee_delapp, should check ieee_delapp not ieee_setapp. This path fix the wrong judgment. Fixes: 0ba22bcb222d ("net: hns3: add support config dscp map to tc") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-08Merge branch 'ionic-diet'David S. Miller8-504/+371
Shannon Nelson says: ==================== ionic: putting ionic on a diet Building on the performance work done in the previous patchset [Link] https://lore.kernel.org/netdev/20240229193935.14197-1-shannon.nelson@amd.com/ this patchset puts the ionic driver on a diet, decreasing the memory requirements per queue, and simplifies a few more bits of logic. We trimmed the queue management structs and gained some ground, but the most savings came from trimming the individual buffer descriptors. The original design used a single generic buffer descriptor for Tx, Rx and Adminq needs, but the Rx and Adminq descriptors really don't need all the info that the Tx descriptors track. By splitting up the descriptor types we can significantly reduce the descriptor sizes for Rx and Adminq use. There is a small reduction in the queue management structs, saving about 3 cachelines per queuepair: ionic_qcq: Before: /* size: 2176, cachelines: 34, members: 23 */ After: /* size: 2048, cachelines: 32, members: 23 */ We also remove an array of completion descriptor pointers, or about 8 Kbytes per queue. But the biggest savings came from splitting the desc_info struct into queue specific structs and trimming out what was unnecessary. Before: ionic_desc_info: /* size: 496, cachelines: 8, members: 10 */ After: ionic_tx_desc_info: /* size: 496, cachelines: 8, members: 6 */ ionic_rx_desc_info: /* size: 224, cachelines: 4, members: 2 */ ionic_admin_desc_info: /* size: 8, cachelines: 1, members: 1 */ In a 64 core host the ionic driver will default to 64 queuepairs of 1024 descriptors for Rx, 1024 for Tx, and 80 for Adminq and Notifyq. The total memory usage for 64 queues: Before: 65 * sizeof(ionic_qcq) 141,440 + 64 * 1024 * sizeof(ionic_desc_info) 32,505,856 + 64 * 1024 * sizeof(ionic_desc_info) 32,505,856 + 64 * 1024 * 2 * sizeof(ionic_qc_info) 16,384 + 1 * 80 * sizeof(ionic_desc_info) 39,690 ---------- 65,201,038 After: 65 * sizeof(ionic_qcq) 133,120 + 64 * 1024 * sizeof(ionic_tx_desc_info) 32,505,856 + 64 * 1024 * sizeof(ionic_rx_desc_info) 14,680,064 + (removed) 0 + 1 * 80 * sizeof(ionic_admin desc_info) 640 ---------- 47,319,680 This saves us approximately 18 Mbytes per port in a 64 core machine, a 28% savings in our memory needs. In addition, this improves our simple single thread / single queue iperf case on a 9100 MTU connection from 86.7 to 95 Gbits/sec. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.