aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-04-30smsc75xx: add more information to register io failure warningsSteve Glendinning1-2/+2
Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: fix mdio reads and writesSteve Glendinning1-2/+2
smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O. Note smsc75xx is different from smsc95xx in this regard. Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: mark link down on startup and let PHY interrupt deal with carrier ↵Steve Glendinning1-1/+1
changes This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30ASoC: s3c2412-i2s: Fix dai registrationHeiko Stübner1-1/+1
As s3c2412-i2s is using the s3c_i2sv2 it should call the more specialised s3c_i2sv2_register_dai instead of simply calling snd_soc_register_dai. Without this call the snd_soc_dai_ops structure isn't initialised correctly. Signed-off-by: Heiko Stuebner <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2012-04-30ASoC: wm8350: Don't use locally allocated codec structMark Brown1-5/+6
The core allocates the live copies, we shouldn't try to duplicate it and were buggy trying to do so as we were using uninitialised data for the control data. Signed-off-by: Mark Brown <[email protected]>
2012-04-30Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds14-88/+188
Pull ARM fixes from Russell King. * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7406/1: hotplug: copy the affinity mask when forcefully migrating IRQs ARM: 7405/1: kexec: call platform_cpu_kill on the killer rather than the victim ARM: 7403/1: tls: remove covert channel via TPIDRURW ARM: 7401/1: mm: Fix section mismatches ARM: OMAP: fix DMA vs memory ordering ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs ARM: 7400/1: vfp: clear fpscr length and stride bits on entry to sig handler ARM: 7399/1: vfp: move user vfp state save/restore code out of signal.c ARM: 7398/1: l2x0: only write to debug registers on PL310 ARM: 7397/1: l2x0: only apply workaround for erratum #753970 on PL310 ARM: 7396/1: errata: only handle ARM erratum #326103 on affected cores
2012-04-30Merge tag 'scsi-fixes' of ↵Linus Torvalds15-136/+198
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of SAS and SATA fixes; there are one or two longstanding bug fixes, but most of this is regression fixes." * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: [SCSI] libfc: update mfs boundry checking [SCSI] Revert "[SCSI] libsas: fix sas port naming" [SCSI] libsas: fix false positive 'device attached' conditions [SCSI] libsas, libata: fix start of life for a sas ata_port [SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready [SCSI] libsas: unify domain_device sas_rphy lifetimes [SCSI] libsas: fix sas_get_port_device regression [SCSI] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' phys [SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work [SCSI] libata: Pass correct DMA device to scsi host [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue
2012-04-30efi: Validate UEFI boot variablesMatthew Garrett1-0/+182
A common flaw in UEFI systems is a refusal to POST triggered by a malformed boot variable. Once in this state, machines may only be restored by reflashing their firmware with an external hardware device. While this is obviously a firmware bug, the serious nature of the outcome suggests that operating systems should filter their variable writes in order to prevent a malicious user from rendering the machine unusable. Signed-off-by: Matthew Garrett <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2012-04-30efi: Add new variable attributesMatthew Garrett1-1/+12
More recent versions of the UEFI spec have added new attributes for variables. Add them. Signed-off-by: Matthew Garrett <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2012-04-30x86, relocs: Remove an unused variableKusanagi Kouichi1-2/+0
sh_symtab is set but not used. [ hpa: putting this in urgent because of the sheer harmlessness of the patch: it quiets a build warning but does not change any generated code. ] Signed-off-by: Kusanagi Kouichi <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: H. Peter Anvin <[email protected]> Cc: <[email protected]>
2012-04-30asm-generic: Use __BITS_PER_LONG in statfs.hH. Peter Anvin1-1/+1
<asm-generic/statfs.h> is exported to userspace, so using BITS_PER_LONG is invalid. We need to use __BITS_PER_LONG instead. This is kernel bugzilla 43165. Reported-by: H.J. Lu <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Acked-by: Arnd Bergmann <[email protected]> Cc: <[email protected]>
2012-04-30nfsd: fix nfs4recover.c printk format warningRandy Dunlap1-1/+1
Fix printk format warnings -- both items are size_t, so use %zu to print them. fs/nfsd/nfs4recover.c:580:3: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t' fs/nfsd/nfs4recover.c:580:3: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' Signed-off-by: Randy Dunlap <[email protected]> Cc: "J. Bruce Fields" <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2012-04-30mac80211: fix AP mode EAP tx for VLAN stationsFelix Fietkau1-1/+2
EAP frames for stations in an AP VLAN are sent on the main AP interface to avoid race conditions wrt. moving stations. For that to work properly, sta_info_get_bss must be used instead of sta_info_get when sending EAP packets. Previously this was only done for cooked monitor injected packets, so this patch adds a check for tx->skb->protocol to the same place. Signed-off-by: Felix Fietkau <[email protected]> Cc: [email protected] Signed-off-by: John W. Linville <[email protected]>
2012-04-30Merge branch 'merge' of ↵Linus Torvalds11-75/+39
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Benjamin Herrenschmidt: "Here are a handful more fixes for powerpc. The irq stuff are all regression fixes, and Gavin's patch is a simple compile fix." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: tty/serial/pmac_zilog: Fix "nobody cared" IRQ message powerpc/pseries: Rivet CONFIG_EEH for pSeries platform powerpc/irqdomain: Fix broken NR_IRQ references powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller
2012-04-30tcp: fix infinite cwnd in tcp_complete_cwr()Yuchung Cheng1-3/+6
When the cwnd reduction is done, ssthresh may be infinite if TCP enters CWR via ECN or F-RTO. If cwnd is not undone, i.e., undo_marker is set, tcp_complete_cwr() falsely set cwnd to the infinite ssthresh value. The correct operation is to keep cwnd intact because it has been updated in ECN or F-RTO. Signed-off-by: Yuchung Cheng <[email protected]> Acked-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30bpf jit: Let the powerpc jit handle negative offsetsJan Seiffert3-31/+111
Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: Jan Seiffert <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30net: fix sk_sockets_allocated_read_positiveEric Dumazet1-2/+2
Denys Fedoryshchenko reported frequent crashes on a proxy server and kindly provided a lockdep report that explains it all : [ 762.903868] [ 762.903880] ================================= [ 762.903890] [ INFO: inconsistent lock state ] [ 762.903903] 3.3.4-build-0061 #8 Not tainted [ 762.904133] --------------------------------- [ 762.904344] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 762.904542] squid/1603 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 762.904542] (key#3){+.?...}, at: [<c0232cc4>] __percpu_counter_sum+0xd/0x58 [ 762.904542] {IN-SOFTIRQ-W} state was registered at: [ 762.904542] [<c0158b84>] __lock_acquire+0x284/0xc26 [ 762.904542] [<c01598e8>] lock_acquire+0x71/0x85 [ 762.904542] [<c0349765>] _raw_spin_lock+0x33/0x40 [ 762.904542] [<c0232c93>] __percpu_counter_add+0x58/0x7c [ 762.904542] [<c02cfde1>] sk_clone_lock+0x1e5/0x200 [ 762.904542] [<c0303ee4>] inet_csk_clone_lock+0xe/0x78 [ 762.904542] [<c0315778>] tcp_create_openreq_child+0x1b/0x404 [ 762.904542] [<c031339c>] tcp_v4_syn_recv_sock+0x32/0x1c1 [ 762.904542] [<c031615a>] tcp_check_req+0x1fd/0x2d7 [ 762.904542] [<c0313f77>] tcp_v4_do_rcv+0xab/0x194 [ 762.904542] [<c03153bb>] tcp_v4_rcv+0x3b3/0x5cc [ 762.904542] [<c02fc0c4>] ip_local_deliver_finish+0x13a/0x1e9 [ 762.904542] [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [<c02fc652>] ip_local_deliver+0x41/0x45 [ 762.904542] [<c02fc4d1>] ip_rcv_finish+0x31a/0x33c [ 762.904542] [<c02fc539>] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [<c02fc857>] ip_rcv+0x201/0x23e [ 762.904542] [<c02daa3a>] __netif_receive_skb+0x319/0x368 [ 762.904542] [<c02dac07>] netif_receive_skb+0x4e/0x7d [ 762.904542] [<c02dacf6>] napi_skb_finish+0x1e/0x34 [ 762.904542] [<c02db122>] napi_gro_receive+0x20/0x24 [ 762.904542] [<f85d1743>] e1000_receive_skb+0x3f/0x45 [e1000e] [ 762.904542] [<f85d3464>] e1000_clean_rx_irq+0x1f9/0x284 [e1000e] [ 762.904542] [<f85d3926>] e1000_clean+0x62/0x1f4 [e1000e] [ 762.904542] [<c02db228>] net_rx_action+0x90/0x160 [ 762.904542] [<c012a445>] __do_softirq+0x7b/0x118 [ 762.904542] irq event stamp: 156915469 [ 762.904542] hardirqs last enabled at (156915469): [<c019b4f4>] __slab_alloc.clone.58.clone.63+0xc4/0x2de [ 762.904542] hardirqs last disabled at (156915468): [<c019b452>] __slab_alloc.clone.58.clone.63+0x22/0x2de [ 762.904542] softirqs last enabled at (156915466): [<c02ce677>] lock_sock_nested+0x64/0x6c [ 762.904542] softirqs last disabled at (156915464): [<c0349914>] _raw_spin_lock_bh+0xe/0x45 [ 762.904542] [ 762.904542] other info that might help us debug this: [ 762.904542] Possible unsafe locking scenario: [ 762.904542] [ 762.904542] CPU0 [ 762.904542] ---- [ 762.904542] lock(key#3); [ 762.904542] <Interrupt> [ 762.904542] lock(key#3); [ 762.904542] [ 762.904542] *** DEADLOCK *** [ 762.904542] [ 762.904542] 1 lock held by squid/1603: [ 762.904542] #0: (sk_lock-AF_INET){+.+.+.}, at: [<c03055c0>] lock_sock+0xa/0xc [ 762.904542] [ 762.904542] stack backtrace: [ 762.904542] Pid: 1603, comm: squid Not tainted 3.3.4-build-0061 #8 [ 762.904542] Call Trace: [ 762.904542] [<c0347b73>] ? printk+0x18/0x1d [ 762.904542] [<c015873a>] valid_state+0x1f6/0x201 [ 762.904542] [<c0158816>] mark_lock+0xd1/0x1bb [ 762.904542] [<c015876b>] ? mark_lock+0x26/0x1bb [ 762.904542] [<c015805d>] ? check_usage_forwards+0x77/0x77 [ 762.904542] [<c0158bf8>] __lock_acquire+0x2f8/0xc26 [ 762.904542] [<c0159b8e>] ? mark_held_locks+0x5d/0x7b [ 762.904542] [<c0159cf6>] ? trace_hardirqs_on+0xb/0xd [ 762.904542] [<c0158dd4>] ? __lock_acquire+0x4d4/0xc26 [ 762.904542] [<c01598e8>] lock_acquire+0x71/0x85 [ 762.904542] [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c0349765>] _raw_spin_lock+0x33/0x40 [ 762.904542] [<c0232cc4>] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c0232cc4>] __percpu_counter_sum+0xd/0x58 [ 762.904542] [<c02cebc4>] __sk_mem_schedule+0xdd/0x1c7 [ 762.904542] [<c02d178d>] ? __alloc_skb+0x76/0x100 [ 762.904542] [<c0305e8e>] sk_wmem_schedule+0x21/0x2d [ 762.904542] [<c0306370>] sk_stream_alloc_skb+0x42/0xaa [ 762.904542] [<c0306567>] tcp_sendmsg+0x18f/0x68b [ 762.904542] [<c031f3dc>] ? ip_fast_csum+0x30/0x30 [ 762.904542] [<c0320193>] inet_sendmsg+0x53/0x5a [ 762.904542] [<c02cb633>] sock_aio_write+0xd2/0xda [ 762.904542] [<c015876b>] ? mark_lock+0x26/0x1bb [ 762.904542] [<c01a1017>] do_sync_write+0x9f/0xd9 [ 762.904542] [<c01a2111>] ? file_free_rcu+0x2f/0x2f [ 762.904542] [<c01a17a1>] vfs_write+0x8f/0xab [ 762.904542] [<c01a284d>] ? fget_light+0x75/0x7c [ 762.904542] [<c01a1900>] sys_write+0x3d/0x5e [ 762.904542] [<c0349ec9>] syscall_call+0x7/0xb [ 762.904542] [<c0340000>] ? rp_sidt+0x41/0x83 Bug is that sk_sockets_allocated_read_positive() calls percpu_counter_sum_positive() without BH being disabled. This bug was added in commit 180d8cd942ce33 (foundations of per-cgroup memory pressure controlling.), since previous code was using percpu_counter_read_positive() which is IRQ safe. In __sk_mem_schedule() we dont need the precise count of allocated sockets and can revert to previous behavior. Reported-by: Denys Fedoryshchenko <[email protected]> Sined-off-by: Eric Dumazet <[email protected]> Cc: Glauber Costa <[email protected]> Acked-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30Merge branch 'master' of git://1984.lsi.us.es/netDavid S. Miller11-40/+94
2012-04-30Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A simple fix for a recent regression in Synaptics driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - fix regression with "image sensor" trackpads
2012-04-30NFSv4.1: Use the correct hostname in the client identifier stringTrond Myklebust1-3/+2
We need to use the hostname of the process that created the nfs_client. That hostname is now stored in the rpc_client->cl_nodename. Also remove the utsname()->domainname component. There is no reason to include the NIS/YP domainname in a client identifier string. Signed-off-by: Trond Myklebust <[email protected]>
2012-04-30SUNRPC: RPC client must use the current utsname hostname stringTrond Myklebust1-4/+10
Now that the rpc client is namespace aware, it needs to use the utsname of the process that created it instead of using the init_utsname. Both rpc_new_client and rpc_clone_client need to be fixed. Signed-off-by: Trond Myklebust <[email protected]> Cc: Stanislav Kinsbursky <[email protected]>
2012-04-30ASoC: tlv312aic23: unbreak resumeEric Bénard1-2/+2
* commit f9dfbf9 "ASoC: tlv320aic23: convert to soc-cache" leads to a bug preventing resumeof the codec as regmap expects a 9 bits data register but 0xFFFF is passed in tlv320aic23_set_bias_level and this values gets cached preventing any write to the TLV320AIC23_PWR register as the final value produced by regmap is (register << 9) | value * this patch solves the problem by only working on the 9 bits the register contains. Signed-off-by: Eric Bénard <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2012-04-30netfilter: xt_CT: fix wrong checking in the timeout assignment pathPablo Neira Ayuso1-1/+1
The current checking always succeeded. We have to check the first character of the string to check that it's empty, thus, skipping the timeout path. This fixes the use of the CT target without the timeout option. Signed-off-by: Pablo Neira Ayuso <[email protected]>
2012-04-30ipvs: kernel oops - do_ip_vs_get_ctlHans Schillstrom3-22/+41
Change order of init so netns init is ready when register ioctl and netlink. Ver2 Whitespace fixes and __init added. Reported-by: "Ryan O'Hara" <[email protected]> Signed-off-by: Hans Schillstrom <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2012-04-30ipvs: take care of return value from protocol init_netnsHans Schillstrom5-6/+22
ip_vs_create_timeout_table() can return NULL All functions protocol init_netns is affected of this patch. Signed-off-by: Hans Schillstrom <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2012-04-30ipvs: null check of net->ipvs in lblc(r) shedulersHans Schillstrom2-0/+6
Avoid crash when registering shedulers after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by: Hans Schillstrom <[email protected]> Acked-by: Julian Anastasov <[email protected]> Signed-off-by: Simon Horman <[email protected]>
2012-04-30drm/nv10/gpio: fix thinko in mask for gpio lines 2-9Ben Skeggs1-1/+1
Signed-off-by: Ben Skeggs <[email protected]>
2012-04-30nvc0/fb: shut up PMFB interrupt after the first occurrenceChristoph Bumiller1-0/+5
Signed-off-by: Christoph Bumiller <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2012-04-30drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvacBen Skeggs1-1/+3
Signed-off-by: Ben Skeggs <[email protected]>
2012-04-30drm/nouveau/bios: fix regression on some nv4x boardBen Skeggs1-3/+7
We started using the connector table on nv4x a while back, and this VBIOS has bad connector indices which causes the wrong encoders to get paired with connectors. Add a quirk to fix this... Signed-off-by: Ben Skeggs <[email protected]>
2012-04-30tty/serial/pmac_zilog: Fix "nobody cared" IRQ messageLarry Finger1-3/+3
Following commit a79dd5a titled "tty/serial/pmac_zilog: Fix suspend & resume", my Powerbook G4 Titanium showed the following stack dump: [ 36.878225] irq 23: nobody cared (try booting with the "irqpoll" option) [ 36.878251] Call Trace: [ 36.878291] [dfff3f00] [c000984c] show_stack+0x7c/0x194 (unreliable) [ 36.878322] [dfff3f40] [c00a6868] __report_bad_irq+0x44/0xf4 [ 36.878339] [dfff3f60] [c00a6b04] note_interrupt+0x1ec/0x2ac [ 36.878356] [dfff3f80] [c00a48d0] handle_irq_event_percpu+0x250/0x2b8 [ 36.878372] [dfff3fd0] [c00a496c] handle_irq_event+0x34/0x54 [ 36.878389] [dfff3fe0] [c00a753c] handle_fasteoi_irq+0xb4/0x124 [ 36.878412] [dfff3ff0] [c000f5bc] call_handle_irq+0x18/0x28 [ 36.878428] [deef1f10] [c000719c] do_IRQ+0x114/0x1cc [ 36.878446] [deef1f40] [c0015868] ret_from_except+0x0/0x1c [ 36.878484] --- Exception: 501 at 0xf497610 [ 36.878489] LR = 0xfdc3dd0 [ 36.878497] handlers: [ 36.878510] [<c02b7424>] pmz_interrupt [ 36.878520] Disabling IRQ #23 From an E-mail exchange about this problem, Andreas Schwab noticed a typo that resulted in the wrong condition being tested. The patch also corrects 2 typos that incorrectly report why an error branch is being taken. Signed-off-by: Larry Finger <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2012-04-30powerpc/pseries: Rivet CONFIG_EEH for pSeries platformGavin Shan1-2/+2
Recently, Ryan Wang tried to compile PPC pSeries platform without CONFIG_EEH and eventually run into errors. Nishanth Aravamudan helped to narrow down the root cause. Actually, the pSeries platform depends on CONFIG_EEH heavily and that won't work properly without EEH support. According to Ben's suggestion, the patch make CONFIG_EEH invisible and keep it as always selected on pSeries platform. Signed-off-by: Gavin Shan <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2012-04-30powerpc/irqdomain: Fix broken NR_IRQ referencesGrant Likely8-29/+14
The switch from using irq_map to irq_alloc_desc*() for managing irq number allocations introduced new bugs in some of the powerpc interrupt code. Several functions rely on the value of NR_IRQS to determine the maximum irq number that could get allocated. However, with sparse_irq and using irq_alloc_desc*() the maximum possible irq number is now specified with 'nr_irqs' which may be a number larger than NR_IRQS. This has caused breakage on powermac when CONFIG_NR_IRQS is set to 32. This patch removes most of the direct references to NR_IRQS in the powerpc code and replaces them with either a nr_irqs reference or by using the common for_each_irq_desc() macro. The powerpc-specific for_each_irq() macro is removed at the same time. Also, the Cell axon_msi driver is refactored to remove the global build assumption on the size of NR_IRQS and instead add a limit to the maximum irq number when calling irq_domain_add_nomap(). Signed-off-by: Grant Likely <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2012-04-30powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controllerGrant Likely1-41/+20
The mpc8xx driver uses a reference to NR_IRQS that is buggy. It uses NR_IRQs for the array size of the ppc_cached_irq_mask bitmap, but NR_IRQs could be smaller than the number of hardware irqs that ppc_cached_irq_mask tracks. Also, while fixing that problem, it became apparent that the interrupt controller only supports 32 interrupt numbers, but it is written as if it supports multiple register banks which is more complicated. This patch pulls out the buggy reference to NR_IRQs and fixes the size of the ppc_cached_irq_mask to match the number of HW irqs. It also drops the now-unnecessary code since ppc_cached_irq_mask is no longer an array. Signed-off-by: Grant Likely <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2012-04-29Linux 3.4-rc5Linus Torvalds1-1/+1
2012-04-29Merge tag 'pm-for-3.4-rc5' of ↵Linus Torvalds2-24/+41
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael J. Wysocki: "Fix for an issue causing hibernation to hang on systems with highmem (that practically means i386) due to broken memory management (bug introduced in 3.2, so -stable material) and PM documentation update making the freezer documentation follow the code again after some recent updates." * tag 'pm-for-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Freezer / Docs: Update documentation about freezing of tasks PM / Hibernate: fix the number of pages used for hibernate/thaw buffering
2012-04-29autofs: make the autofsv5 packet file descriptor use a packetized pipeLinus Torvalds3-2/+13
The autofs packet size has had a very unfortunate size problem on x86: because the alignment of 'u64' differs in 32-bit and 64-bit modes, and because the packet data was not 8-byte aligned, the size of the autofsv5 packet structure differed between 32-bit and 64-bit modes despite looking otherwise identical (300 vs 304 bytes respectively). We first fixed that up by making the 64-bit compat mode know about this problem in commit a32744d4abae ("autofs: work around unhappy compat problem on x86-64"), and that made a 32-bit 'systemd' work happily on a 64-bit kernel because everything then worked the same way as on a 32-bit kernel. But it turned out that 'automount' had actually known and worked around this problem in user space, so fixing the kernel to do the proper 32-bit compatibility handling actually *broke* 32-bit automount on a 64-bit kernel, because it knew that the packet sizes were wrong and expected those incorrect sizes. As a result, we ended up reverting that compatibility mode fix, and thus breaking systemd again, in commit fcbf94b9dedd. With both automount and systemd doing a single read() system call, and verifying that they get *exactly* the size they expect but using different sizes, it seemed that fixing one of them inevitably seemed to break the other. At one point, a patch I seriously considered applying from Michael Tokarev did a "strcmp()" to see if it was automount that was doing the operation. Ugly, ugly. However, a prettier solution exists now thanks to the packetized pipe mode. By marking the communication pipe as being packetized (by simply setting the O_DIRECT flag), we can always just write the bigger packet size, and if user-space does a smaller read, it will just get that partial end result and the extra alignment padding will simply be thrown away. This makes both automount and systemd happy, since they now get the size they asked for, and the kernel side of autofs simply no longer needs to care - it could pad out the packet arbitrarily. Of course, if there is some *other* user of autofs (please, please, please tell me it ain't so - and we haven't heard of any) that tries to read the packets with multiple writes, that other user will now be broken - the whole point of the packetized mode is that one system call gets exactly one packet, and you cannot read a packet in pieces. Tested-by: Michael Tokarev <[email protected]> Cc: Alan Cox <[email protected]> Cc: David Miller <[email protected]> Cc: Ian Kent <[email protected]> Cc: Thomas Meyer <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2012-04-29PM / Freezer / Docs: Update documentation about freezing of tasksMarcos Paulo de Souza1-18/+19
The file Documentation/power/freezing-of-tasks.txt was still referencing the TIF_FREEZE flag, that was removed by the commit d88e4cb67197d007fb778d62fe17360e970d5bfa(freezer: remove now unused TIF_FREEZE). This patch removes all the references of TIF_FREEZE that were left behind. Signed-off-by: Marcos Paulo de Souza <[email protected]> Signed-off-by: Srivatsa S. Bhat <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2012-04-29pipes: add a "packetized pipe" mode for writingLinus Torvalds2-2/+30
The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev <[email protected]> Cc: Alan Cox <[email protected]> Cc: David Miller <[email protected]> Cc: Ian Kent <[email protected]> Cc: Thomas Meyer <[email protected]> Cc: [email protected] # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds <[email protected]>
2012-04-29Merge tag 'staging-3.4-rc4' of ↵Linus Torvalds7-12/+23
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fixes from Greg Kroah-Hartman: "Here are some tiny drivers/staging/ bugfixes. Some build fixes that were recently reported, as well as one kfree bug that is hitting a number of users." * tag 'staging-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: ozwpan: Fix bug where kfree is called twice. staging: octeon-ethernet: fix build errors by including interrupt.h staging: zcache: fix Kconfig crypto dependency staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS
2012-04-29Merge tag 'usb-3.4-rc5' of ↵Linus Torvalds13-12/+47
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are a number of small USB fixes for 3.4-rc5. Nothing major, as before, some USB gadget fixes. There's a crash fix for a number of ASUS laptops on resume that had been reported by a number of different people. We think the fix might also pertain to other machines, as this was a BIOS bug, and they seem to travel to different models and manufacturers quite easily. Other than that, some other reported problems fixed as well." * tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: udc-core: fix incompatibility with dummy-hcd usb: gadget: udc-core: fix wrong call order USB: cdc-wdm: fix race leading leading to memory corruption USB: EHCI: fix crash during suspend on ASUS computers usb gadget: uvc: uvc_request_data::length field must be signed usb: gadget: dummy: do not call pullup() on udc_stop() usb: musb: davinci.c: add missing unregister usb: musb: drop __deprecated flag USB: gadget: storage gadgets send wrong error code for unknown commands usb: otg: gpio_vbus: Add otg transceiver events and notifiers
2012-04-28NFS: get module in idmap PipeFS notifier callbackStanislav Kinsbursky1-0/+4
This is bug fix. Notifier callback is called from SUNRPC module. So before dereferencing NFS module we have to make sure, that it's alive. Signed-off-by: Stanislav Kinsbursky <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2012-04-28Merge branch 'for-linus' of ↵Linus Torvalds15-139/+148
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "This has our collection of bug fixes. I missed the last rc because I thought our patches were making NFS crash during my xfs test runs. Turns out it was an NFS client bug fixed by someone else while I tried to bisect it. All of these fixes are small, but some are fairly high impact. The biggest are fixes for our mount -o remount handling, a deadlock due to GFP_KERNEL allocations in readdir, and a RAID10 error handling bug. This was tested against both 3.3 and Linus' master as of this morning." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (26 commits) Btrfs: reduce lock contention during extent insertion Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir Btrfs: Fix space checking during fs resize Btrfs: fix block_rsv and space_info lock ordering Btrfs: Prevent root_list corruption Btrfs: fix repair code for RAID10 Btrfs: do not start delalloc inodes during sync Btrfs: fix that check_int_data mount option was ignored Btrfs: don't count CRC or header errors twice while scrubbing Btrfs: fix btrfs_ioctl_dev_info() crash on missing device btrfs: don't return EINTR Btrfs: double unlock bug in error handling Btrfs: always store the mirror we read the eb from fs/btrfs/volumes.c: add missing free_fs_devices btrfs: fix early abort in 'remount' Btrfs: fix max chunk size check in chunk allocator Btrfs: add missing read locks in backref.c Btrfs: don't call free_extent_buffer twice in iterate_irefs Btrfs: Make free_ipath() deal gracefully with NULL pointers Btrfs: avoid possible use-after-free in clear_extent_bit() ...
2012-04-28Merge tag 'fixes-for-linus' of ↵Linus Torvalds21-142/+230
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Nothing controversial, just another batch of fixes: - Samsung/exynos fixes for more merge window fallout: build errors and warnings mostly, but also some clock/device setup issues on exynos4/5 - PXA bug and warning fixes related to gpio and pinmux - IRQ domain conversion bugfixes for U300 and MSM - A regulator setup fix for U300" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: PXA2xx: MFP: fix potential direction bug ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT arm/sa1100: fix sa1100-rtc memory resource ARM: pxa: fix gpio wakeup setting ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined ARM: EXYNOS: Fix resource on dev-dwmci.c ARM: S3C24XX: Fix build warning for S3C2410_PM ARM: mini2440_defconfig: Fix build error ARM: msm: Fix gic irqdomain support ARM: EXYNOS: Fix incorrect initialization of GIC ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers ARM: u300: bump all IRQ numbers by one ARM: ux300: Fix unimplementable regulation constraints
2012-04-28Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds3-2/+11
Pull drm fixes from Dave Airlie: "As soon as I sent the non-urgent stack, two important fixes come in: - i915: fixes SNB GPU hangs in a number of 3D apps - radeon: initial fix for VGA on LLano system, 3 or 4 of us have spent time debugging this, and Jerome finally figured out the magic bit the BIOS/fglrx set that we didn't. This at least should get things working, there may be future reliability fixes." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: Set the Stencil Cache eviction policy to non-LRA mode. drm/radeon/kms: need to set up ss on DP bridges as well
2012-04-28Revert "autofs: work around unhappy compat problem on x86-64"Linus Torvalds4-23/+3
This reverts commit a32744d4abae24572eff7269bc17895c41bd0085. While that commit was technically the right thing to do, and made the x86-64 compat mode work identically to native 32-bit mode (and thus fixing the problem with a 32-bit systemd install on a 64-bit kernel), it turns out that the automount binaries had workarounds for this compat problem. Now, the workarounds are disgusting: doing an "uname()" to find out the architecture of the kernel, and then comparing it for the 64-bit cases and fixing up the size of the read() in automount for those. And they were confused: it's not actually a generic 64-bit issue at all, it's very much tied to just x86-64, which has different alignment for an 'u64' in 64-bit mode than in 32-bit mode. But the end result is that fixing the compat layer actually breaks the case of a 32-bit automount on a x86-64 kernel. There are various approaches to fix this (including just doing a "strcmp()" on current->comm and comparing it to "automount"), but I think that I will do the one that teaches pipes about a special "packet mode", which will allow user space to not have to care too deeply about the padding at the end of the autofs packet. That change will make the compat workaround unnecessary, so let's revert it first, and get automount working again in compat mode. The packetized pipes will then fix autofs for systemd. Reported-and-requested-by: Michael Tokarev <[email protected]> Cc: Ian Kent <[email protected]> Cc: [email protected] # for 3.3 Signed-off-by: Linus Torvalds <[email protected]>
2012-04-28ARM: 7406/1: hotplug: copy the affinity mask when forcefully migrating IRQsWill Deacon1-3/+3
When a CPU is hotplugged off, we migrate any IRQs currently affine to it away and onto another online CPU by calling the irq_set_affinity function of the relevant interrupt controller chip. This function returns either IRQ_SET_MASK_OK or IRQ_SET_MASK_OK_NOCOPY, to indicate whether irq_data.affinity was updated. If we are forcefully migrating an interrupt (because the affinity mask no longer identifies any online CPUs) then we should update the IRQ affinity mask to reflect the new CPU set. Failure to do so can potentially leave /proc/irq/n/smp_affinity identifying only offline CPUs, which may confuse userspace IRQ balancing daemons. This patch updates migrate_one_irq to copy the affinity mask when the interrupt chip returns IRQ_SET_MASK_OK after forcefully changing the affinity of an interrupt. Cc: [email protected] Reported-by: Leif Lindholm <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-04-28ARM: 7405/1: kexec: call platform_cpu_kill on the killer rather than the victimWill Deacon1-11/+17
When performing a kexec on an SMP system, the secondary cores are stopped by calling machine_shutdown(), which in turn issues IPIs to offline the other CPUs. Unfortunately, this isn't enough to reboot the cores into a new kernel (since they are just executing a cpu_relax loop somewhere in memory) so we make use of platform_cpu_kill, part of the CPU hotplug implementation, to place the cores somewhere safe. This function expects to be called on the killing CPU for each core that it takes out. This patch moves the platform_cpu_kill callback out of the IPI handler and into smp_send_stop, therefore ensuring that it executes on the killing CPU rather than on the victim, matching what the hotplug code requires. Cc: [email protected] Reported-by: Russell King <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-04-28ARM: 7403/1: tls: remove covert channel via TPIDRURWWill Deacon1-0/+4
TPIDRURW is a user read/write register forming part of the group of thread registers in more recent versions of the ARM architecture (~v6+). Currently, the kernel does not touch this register, which allows tasks to communicate covertly by reading and writing to the register without context-switching affecting its contents. This patch clears TPIDRURW when TPIDRURO is updated via the set_tls macro, which is called directly from __switch_to. Since the current behaviour makes the register useless to userspace as far as thread pointers are concerned, simply clearing the register (rather than saving and restoring it) will not cause any problems to userspace. Cc: [email protected] Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Russell King <[email protected]>
2012-04-28ARM: 7401/1: mm: Fix section mismatchesStephen Boyd2-4/+4
WARNING: vmlinux.o(.text+0x111b8): Section mismatch in reference from the function arm_memory_present() to the function .init.text:memory_present() The function arm_memory_present() references the function __init memory_present(). This is often because arm_memory_present lacks a __init annotation or the annotation of memory_present is wrong. WARNING: arch/arm/mm/built-in.o(.text+0x1edc): Section mismatch in reference from the function alloc_init_pud() to the function .init.text:alloc_init_section() The function alloc_init_pud() references the function __init alloc_init_section(). This is often because alloc_init_pud lacks a __init annotation or the annotation of alloc_init_section is wrong. Signed-off-by: Stephen Boyd <[email protected]> Signed-off-by: Russell King <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.