aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-02-25LoongArch: ptrace: Add function argument access APIQing Zhang2-0/+35
Add regs_get_argument() which returns N th argument of the function call, This enables ftrace kprobe events to access kernel function arguments via $argN syntax for later use. E.g.: echo 'p bio_add_page arg1=$arg1' > kprobe_events bash: echo: write error: Invalid argument Signed-off-by: Qing Zhang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: ptrace: Expose hardware breakpoints to debuggersQing Zhang3-0/+413
Implement the regset-based ptrace interface that exposes hardware breakpoints to user-space debuggers to query and set instruction and data breakpoints. Signed-off-by: Qing Zhang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Add hardware breakpoints/watchpoints supportQing Zhang9-22/+713
Use perf framework to manage hardware instruction and data breakpoints. LoongArch defines hardware watchpoint functions for instruction fetch and memory load/store operations. After the software configures hardware watchpoints, the processor hardware will monitor the access address of the instruction fetch and load/store operation, and trigger an exception of the watchpoint when it meets the conditions set by the watchpoint. The hardware monitoring points for instruction fetching and load/store operations each have a register for the overall configuration of all monitoring points, a register for recording the status of all monitoring points, and four registers required for configuration of each watchpoint individually. Signed-off-by: Qing Zhang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: kdump: Add crashkernel=YM handlingYouling Tang1-3/+11
When the kernel crashkernel parameter is specified with just a size, we are supposed to allocate a region from RAM to store the crashkernel, "crashkernel=512M" would be recommended for kdump. Fix this by lifting similar code from x86, importing it to LoongArch with LoongArch specific parameters added. We allocate the crashkernel region from the first 4GB of physical memory (because SWIOTLB should be allocated below 4GB). However, LoongArch currently does not implement crashkernel_low and crashkernel_high the same as x86. When X is not specified, crash_base defaults to 0 (crashkernel=YM@XM). Signed-off-by: Youling Tang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: kdump: Add single kernel image implementationYouling Tang5-16/+5
This feature depends on the kernel being relocatable. Enable using single kernel image for kdump, and then no longer need to build two kernels (production kernel and capture kernel share a single kernel image). Also enable CONFIG_CRASH_DUMP in loongson3_defconfig. Signed-off-by: Youling Tang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Add support for kernel address space layout randomization (KASLR)Youling Tang4-6/+179
This patch adds support for relocating the kernel to a random address. Entropy is derived from the banner, which will change every build and random_get_entropy() which should provide additional runtime entropy. The kernel is relocated by up to RANDOMIZE_BASE_MAX_OFFSET bytes from its link address. Because relocation happens so early during the kernel booting, the amount of physical memory has not yet been determined. This means the only way to limit relocation within the available memory is via Kconfig. So we limit the maximum value of RANDOMIZE_BASE_MAX_OFFSET to 256M (0x10000000) because our memory layout has many holes. Signed-off-by: Youling Tang <[email protected]> Signed-off-by: Xi Ruoyao <[email protected]> # Fix compiler warnings Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Add support for kernel relocationYouling Tang8-2/+173
This config allows to compile kernel as PIE and to relocate it at any virtual address at runtime: this paves the way to KASLR. Runtime relocation is possible since relocation metadata are embedded into the kernel. Signed-off-by: Youling Tang <[email protected]> Signed-off-by: Xi Ruoyao <[email protected]> # Use arch_initcall Signed-off-by: Jinyang He <[email protected]> # Provide la_abs relocation code Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Add la_abs macro implementationYouling Tang4-12/+16
Use the "la_abs macro" instead of the "la.abs pseudo instruction" to prepare for the subsequent PIE kernel. When PIE is not enabled, la_abs is equivalent to la.abs. Signed-off-by: Youling Tang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.absYouling Tang3-11/+15
Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs directly. This is a preparation for subsequent patches. Signed-off-by: Youling Tang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Use la.pcrel instead of la.abs when it's trivially possibleXi Ruoyao5-50/+48
Let's start to kill la.abs in preparation for the subsequent support of the PIE kernel. BTW, Re-tab the indention in arch/loongarch/kernel/entry.S for alignment. Signed-off-by: Xi Ruoyao <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Make -mstrict-align configurableHuacai Chen4-3/+34
Introduce Kconfig option ARCH_STRICT_ALIGN to make -mstrict-align be configurable. Not all LoongArch cores support h/w unaligned access, we can use the -mstrict-align build parameter to prevent unaligned accesses. CPUs with h/w unaligned access support: Loongson-2K2000/2K3000/3A5000/3C5000/3D5000. CPUs without h/w unaligned access support: Loongson-2K500/2K1000. This option is enabled by default to make the kernel be able to run on all LoongArch systems. But you can disable it manually if you want to run kernel only on systems with h/w unaligned access support in order to optimise for performance. Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Only call get_timer_irq() once in constant_clockevent_init()Tiezhu Yang1-5/+6
Under CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_DEBUG_PREEMPT=y, we can see the following messages on LoongArch, this is because using might_sleep() in preemption disable context. [ 0.001127] smp: Bringing up secondary CPUs ... [ 0.001222] Booting CPU#1... [ 0.001244] 64-bit Loongson Processor probed (LA464 Core) [ 0.001247] CPU1 revision is: 0014c012 (Loongson-64bit) [ 0.001250] FPU1 revision is: 00000000 [ 0.001252] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283 [ 0.001255] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1 [ 0.001257] preempt_count: 1, expected: 0 [ 0.001258] RCU nest depth: 0, expected: 0 [ 0.001259] Preemption disabled at: [ 0.001261] [<9000000000223800>] arch_dup_task_struct+0x20/0x110 [ 0.001272] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc7+ #43 [ 0.001275] Hardware name: Loongson Loongson-3A5000-7A1000-1w-A2101/Loongson-LS3A5000-7A1000-1w-A2101, BIOS vUDK2018-LoongArch-V4.0.05132-beta10 12/13/202 [ 0.001277] Stack : 0072617764726148 0000000000000000 9000000000222f1c 90000001001e0000 [ 0.001286] 90000001001e3be0 90000001001e3be8 0000000000000000 0000000000000000 [ 0.001292] 90000001001e3be8 0000000000000040 90000001001e3cb8 90000001001e3a50 [ 0.001297] 9000000001642000 90000001001e3be8 be694d10ce4139dd 9000000100174500 [ 0.001303] 0000000000000001 0000000000000001 00000000ffffe0a2 0000000000000020 [ 0.001309] 000000000000002f 9000000001354116 00000000056b0000 ffffffffffffffff [ 0.001314] 0000000000000000 0000000000000000 90000000014f6e90 9000000001642000 [ 0.001320] 900000000022b69c 0000000000000001 0000000000000000 9000000001736a90 [ 0.001325] 9000000100038000 0000000000000000 9000000000222f34 0000000000000000 [ 0.001331] 00000000000000b0 0000000000000004 0000000000000000 0000000000070000 [ 0.001337] ... [ 0.001339] Call Trace: [ 0.001342] [<9000000000222f34>] show_stack+0x5c/0x180 [ 0.001346] [<90000000010bdd80>] dump_stack_lvl+0x60/0x88 [ 0.001352] [<9000000000266418>] __might_resched+0x180/0x1cc [ 0.001356] [<90000000010c742c>] mutex_lock+0x20/0x64 [ 0.001359] [<90000000002a8ccc>] irq_find_matching_fwspec+0x48/0x124 [ 0.001364] [<90000000002259c4>] constant_clockevent_init+0x68/0x204 [ 0.001368] [<900000000022acf4>] start_secondary+0x40/0xa8 [ 0.001371] [<90000000010c0124>] smpboot_entry+0x60/0x64 Here are the complete call chains: smpboot_entry() start_secondary() constant_clockevent_init() get_timer_irq() irq_find_matching_fwnode() irq_find_matching_fwspec() mutex_lock() might_sleep() __might_sleep() __might_resched() In order to avoid the above issue, we should break the call chains, using timer_irq_installed variable as check condition to only call get_timer_irq() once in constant_clockevent_init() is a simple and proper way. Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25LoongArch: Fix Chinese comma in cpu.hJinyang He1-1/+1
Fix Chinese comma introduced by accident in cpu.h. Signed-off-by: Jinyang He <[email protected]> Signed-off-by: Huacai Chen <[email protected]>
2023-02-25driver core: fw_devlink: Print full path and name of fwnodeSaravana Kannan1-3/+3
Some of the log messages were printing just the fwnode name. While it's short, it's not always uniquely identifiable in system. So print the full path and name to make debugging easier. Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-02-25driver core: fw_devlink: Avoid spurious error messageSaravana Kannan1-3/+3
fw_devlink can sometimes try to create a device link with the consumer and supplier as the same device. These attempts will fail (correctly), but are harmless. So, avoid printing an error for these cases. Also, add more detail to the error message. Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust") Reported-by: Vladimir Oltean <[email protected]> Reported-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-02-25driver core: bus: Handle early calls to bus_to_subsys()Geert Uytterhoeven1-1/+1
When calling soc_device_match() from early_initcall(), bus_kset is still NULL, causing a crash: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 ... Call trace: __lock_acquire+0x530/0x20f0 lock_acquire.part.0+0xc8/0x210 lock_acquire+0x64/0x80 _raw_spin_lock+0x4c/0x60 bus_to_subsys+0x24/0xac bus_for_each_dev+0x30/0xcc soc_device_match+0x4c/0xe0 r8a7795_sysc_init+0x18/0x60 rcar_sysc_pd_init+0xb0/0x33c do_one_initcall+0x128/0x2bc Before, bus_for_each_dev() handled this gracefully by checking that the back-pointer to the private structure was valid. Fix this by adding a NULL check for bus_kset to bus_to_subsys(). Fixes: 83b9148df2c95e23 ("driver core: bus: bus iterator cleanups") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/0a92979f6e790737544638e8a4c19b0564e660a2.1676983596.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <[email protected]>
2023-02-25Merge 'pci/enumeration' into loongarch-nextHuacai Chen5-37/+63
LoongArch architecture changes for 6.3 depend on the pci changes to work well, so merge them to create a base.
2023-02-24alpha: in_irq() cleanupChangbin Du1-1/+1
Replace the obsolete and ambiguos macro in_irq() with new macro in_hardirq(). Signed-off-by: Changbin Du <[email protected]> Signed-off-by: Matt Turner <[email protected]>
2023-02-24alpha: lazy FPU switchingAl Viro9-119/+192
On each context switch we save the FPU registers on stack of old process and restore FPU registers from the stack of new one. That allows us to avoid doing that each time we enter/leave the kernel mode; however, that can get suboptimal in some cases. For one thing, we don't need to bother saving anything for kernel threads. For another, if between entering and leaving the kernel a thread gives CPU up more than once, it will do useless work, saving the same values every time, only to discard the saved copy as soon as it returns from switch_to(). Alternative solution: * move the array we save into from switch_stack to thread_info * have a (thread-synchronous) flag set when we save them * have another flag set when they should be restored on return to userland. * do *NOT* save/restore them in do_switch_stack()/undo_switch_stack(). * restore on the exit to user mode if the restore flag had been set. Clear both flags. * on context switch, entry to fork/clone/vfork, before entry into do_signal() and on entry into straced syscall save the registers and set the 'saved' flag unless it had been already set. * on context switch set the 'restore' flag as well. * have copy_thread() set both flags for child, so the registers would be restored once the child returns to userland. * use the saved data in setup_sigcontext(); have restore_sigcontext() set both flags and copy from sigframe to save area. * teach ptrace to look for FPU registers in thread_info instead of switch_stack. * teach isolated accesses to FPU registers (rdfpcr, wrfpcr, etc.) to check the 'saved' flag (under preempt_disable()) and work with the save area if it's been set; if 'saved' flag is found upon write access, set 'restore' flag as well. Signed-off-by: Al Viro <[email protected]> Signed-off-by: Matt Turner <[email protected]>
2023-02-24alpha/boot/misc: trim unused declarationsAl Viro1-2/+0
gzip_mark() and gzip_release() are gone; there used to be two forward declarations of each and the patch removing those suckers had left one of each behind... Signed-off-by: Al Viro <[email protected]> Signed-off-by: Matt Turner <[email protected]>
2023-02-24alpha/boot/tools/objstrip: fix the check for ELF headerAl Viro1-1/+1
Just memcmp() with ELFMAG - that's the normal way to do it in userland code, which that thing is. Besides, that has the benefit of actually building - str_has_prefix() is *NOT* present in <string.h>. Fixes: 5f14596e55de "alpha: Replace strncmp with str_has_prefix" Signed-off-by: Al Viro <[email protected]> Signed-off-by: Matt Turner <[email protected]>
2023-02-24alpha/boot: fix the breakage from -isystem series...Al Viro4-5/+5
Signed-off-by: Al Viro <[email protected]> Signed-off-by: Matt Turner <[email protected]>
2023-02-24alpha: fix FEN fault handlingAl Viro1-15/+15
Type 3 instruction fault (FPU insn with FPU disabled) is handled by quietly enabling FPU and returning. Which is fine, except that we need to do that both for fault in userland and in the kernel; the latter *can* legitimately happen - all it takes is this: .global _start _start: call_pal 0xae lda $0, 0 ldq $0, 0($0) - call_pal CLRFEN to clear "FPU enabled" flag and arrange for a signal delivery (SIGSEGV in this case). Fixed by moving the handling of type 3 into the common part of do_entIF(), before we check for kernel vs. user mode. Incidentally, check for kernel mode is unidiomatic; the normal way to do that is !user_mode(regs). The difference is that the open-coded variant treats any of bits 63..3 of regs->ps being set as "it's user mode" while the normal approach is to check just the bit 3. PS is a 4-bit register and regs->ps always will have bits 63..4 clear, so the open-code variant here is actually equivalent to !user_mode(regs). Harder to follow, though... Reproducer above will crash any box where CLRFEN is not ignored by PAL (== any actual hardware, AFAICS; PAL used in qemu doesn't bother implementing that crap). Cc: [email protected] # all way back... Reviewed-by: Richard Henderson <[email protected]> Signed-off-by: Al Viro <[email protected]> Signed-off-by: Matt Turner <[email protected]>
2023-02-24alpha: Avoid comma separated statementsJoe Perches1-3/+5
Use semicolons and braces. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: Matt Turner <[email protected]>
2023-02-24alpha: fixed a typo in core_cia.crj11-1/+1
Signed-off-by: Matt Turner <[email protected]>
2023-02-24Merge branch 'work.misc' of ↵Linus Torvalds2-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff that didn't fit anywhere else" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: nsfs: repair kernel-doc for ns_match() nsfs: add compat ioctl handler fs/cramfs: Convert kmap() to kmap_local_data()
2023-02-24Merge branch 'work.namespace' of ↵Linus Torvalds5-20/+41
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull ipc namespace update from Al Viro: "Rik's patches reducing the amount of synchronize_rcu() triggered by ipc namespace destruction. I've some pending stuff reducing that on the normal umount side, but it's nowhere near ready and Rik's stuff shouldn't be held back due to conflicts - I'll just redo the parts of my series that stray into ipc/*" * 'work.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ipc,namespace: batch free ipc_namespace structures ipc,namespace: make ipc namespace allocation wait for pending free
2023-02-24Merge branch 'work.alpha' of ↵Linus Torvalds7-23/+21
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull alpha updates from Al Viro: "FEN (floating-point enable) fault fix deals with a really old oopsable braino, the rest is alpha/boot compile fixes and minor cleaning up" * 'work.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: alpha/boot/misc: trim unused declarations alpha/boot/tools/objstrip: fix the check for ELF header alpha/boot: fix the breakage from -isystem series... alpha: fix FEN fault handling
2023-02-24Merge branch 'work.sysv' of ↵Linus Torvalds3-88/+111
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull sysv updates from Al Viro: "Fabio's 'switch to kmap_local_page()' patchset (originally after the ext2 counterpart, with a lot of cleaning up done to it; as the matter of fact, ext2 side is in need of similar cleanups - calling conventions there are bloody awful). Plus the equivalents of minix stuff..." * 'work.sysv' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: sysv: fix handling of delete_entry and set_link failures fs/sysv: Replace kmap() with kmap_local_page() fs/sysv: Use dir_put_page() in sysv_rename() fs/sysv: Change the signature of dir_get_page() fs/sysv: Use the offset_in_page() helper sysv: don't flush page immediately for DIRSYNC directories
2023-02-24Merge branch 'work.minix' of ↵Linus Torvalds4-92/+91
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull minix updates from Al Viro: "Assorted fixes - mostly Christoph's" * 'work.minix' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: minix_rename(): minix_delete_entry() might fail minix: don't flush page immediately for DIRSYNC directories minix: fix error handling in minix_set_link minix: fix error handling in minix_delete_entry minix: move releasing pages into unlink and rename minix: make minix_new_inode() return error as ERR_PTR(-E...)
2023-02-24ibmvnic: Assign XPS map to correct queue indexNick Child1-2/+2
When setting the XPS map value for TX queues, use the index of the transmit queue. Previously, the function was passing the index of the loop that iterates over all queues (RX and TX). This was causing invalid XPS map values. Fixes: 6831582937bd ("ibmvnic: Toggle between queue types in affinity mapping") Signed-off-by: Nick Child <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-24docs: net: fix inaccuracies in msg_zerocopy.rstnick black1-3/+3
Replace "sendpage" with "sendfile". Remove comment about ENOBUFS when the sockopt hasn't been set; experimentation indicates that this is not true. Signed-off-by: nick black <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Link: https://lore.kernel.org/r/Y/gg/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-24Merge tag 'soundwire-6.3-rc1' of ↵Linus Torvalds13-167/+207
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire Pull soundwire updates from Vinod Koul: "This is a small update which features a bit of core changes and driver updates in Intel and cadence driver. Core: - sdw_transfer_defer() API change to drop an argument - Reset page address rework - Export sdw_nwrite_no_pm and sdw_nread_no_pm APIs Drivers: - Cadence and related intel driver updates for FIFO handling and low level msg transfers" * tag 'soundwire-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: cadence: further simplify low-level xfer_msg_defer() callback soundwire: cadence: use directly bus sdw_defer structure soundwire: bus: remove sdw_defer argument in sdw_transfer_defer() soundwire: stream: use consistent pattern for freeing buffers soundwire: bus: Remove unused reset_page_addr() callback soundwire: bus: Don't zero page registers after every transaction soundwire: bus_type: Avoid lockdep assert in sdw_drv_probe() soundwire: stream: Move remaining register accesses over to no_pm soundwire: debugfs: Switch to sdw_read_no_pm soundwire: Provide build stubs for common functions soundwire: bus: export sdw_nwrite_no_pm and sdw_nread_no_pm functions soundwire: cadence: remove unused sdw_cdns_master_ops declaration soundwire: enable optional clock registers for SoundWire 1.2 devices ASoC/soundwire: remove is_sdca boolean property soundwire: cadence: Drain the RX FIFO after an IO timeout soundwire: cadence: Remove wasted space in response_buf soundwire: cadence: Don't overflow the command FIFOs soundwire: intel: remove DAI startup/shutdown
2023-02-24Merge tag 'phy-for-6.3' of ↵Linus Torvalds69-1495/+6574
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This features a bunch of new device support, a couple of new drivers, yaml conversion and updates of a few drivers. Core support: - New devm_of_phy_optional_get() API with users and conversion New hardware support: - Mediatek MT7986 phy support - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY support amd SM8350 & SM8450 combo phy support - Qualcomm SNPS eUSB2 eUSB2 repeater drivers - Allwinner F1C100s USB PHY support - Tegra xusb support for Tegra234 Updates: - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy - G4 mode support in Qualcomm UFS phy and support for various SoCs - Yaml conversion for Meson usb2 phy - TI Type C support for usb phy for j721 - Yaml conversion for Tegra xusb binding" * tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits) phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater phy: qcom: Add QCOM SNPS eUSB2 repeater driver dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property phy: rockchip-typec: Fix unsigned comparison with less than zero phy: rockchip-typec: fix tcphy_get_mode error case phy: qcom: snps-eusb2: Add missing headers phy: qcom-qmp-combo: Add support for SM8550 phy: qcom-qmp: Add v6 DP register offsets phy: qcom-qmp: pcs-usb: Add v6 register offsets dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible phy: qcom: Add QCOM SNPS eUSB2 driver dt-bindings: phy: Add qcom,snps-eusb2-phy schema file phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6 register offsets phy: qcom-qmp: pcs: Add v6.20 register offsets ...
2023-02-24Merge tag 'dmaengine-6.3-rc1' of ↵Linus Torvalds88-445/+2119
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "A new driver, couple of device support and binding conversion along with bunch of driver updates are the main features of this. New hardware support: - TI AM62Ax controller support - Xilinx xdma driver - Qualcomm SM6125, SM8550, QDU1000/QRU1000 GPI controller Updates: - Runtime pm support for at_xdmac driver - IMX sdma binding conversion to yaml and HDMI audio support - IMX mxs binding conversion to yaml" * tag 'dmaengine-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (35 commits) dmaengine: idma64: Update bytes_transferred field dmaengine: imx-sdma: Set DMA channel to be private dmaengine: dw: Move check for paused channel to dwc_get_residue() dmaengine: ptdma: check for null desc before calling pt_cmd_callback dmaengine: dw-axi-dmac: Do not dereference NULL structure dmaengine: idxd: Fix default allowed read buffers value in group dmaengine: sf-pdma: pdma_desc memory leak fix dmaengine: Simplify dmaenginem_async_device_register() function dmaengine: use sysfs_emit() to instead of scnprintf() dmaengine: Make an order in struct dma_device definition dt-bindings: dma: cleanup examples - indentation, lowercase hex dt-bindings: dma: drop unneeded quotes dmaengine: xilinx: xdma: Add user logic interrupt support dmaengine: xilinx: xdma: Add xilinx xdma driver dmaengine: drivers: Use devm_platform_ioremap_resource() dmaengine: at_xdmac: remove empty line dmaengine: at_xdmac: add runtime pm support dmaengine: at_xdmac: align properly function members dmaengine: ppc4xx: Convert to use sysfs_emit()/sysfs_emit_at() APIs dmaengine: sun6i: Set the maximum segment size ...
2023-02-24Merge tag 'i2c-for-6.3-rc1' of ↵Linus Torvalds37-396/+2128
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new drivers for HPE GXP and Loongson 2K/LS7A - bigger refactorings for i801 and xiic - gpio driver gained ACPI and SDA-write only support - the core converted some OF helpers to fwnode helpers - usual bunch of driver updates * tag 'i2c-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) MAINTAINERS: Add HPE GXP I2C Support i2c: Add GXP SoC I2C Controller dt-bindings: i2c: Add hpe,gxp-i2c i2c: xiic: Remove some dead code i2c: xiic: Add SCL frequency configuration support i2c: xiic: Update compatible with new IP version dt-bindings: i2c: xiic: Add 'xlnx,axi-iic-2.1' to compatible i2c: i801: Call i801_check_post() from i801_access() i2c: i801: Call i801_check_pre() from i801_access() i2c: i801: Centralize configuring block commands in i801_block_transaction i2c: i801: Centralize configuring non-block commands in i801_simple_transaction i2c: i801: Handle SMBAUXCTL_E32B in i801_block_transaction_by_block only i2c: i801: Add i801_simple_transaction(), complementing i801_block_transaction() Documentation: i2c: correct spelling dt-bindings: i2c: i2c-st: convert to DT schema i2c: i801: add helper i801_set_hstadd() i2c: i801: make FEATURE_BLOCK_PROC dependent on FEATURE_BLOCK_BUFFER i2c: i801: make FEATURE_HOST_NOTIFY dependent on FEATURE_IRQ i2c: i801: improve interrupt handler i2c: st: use pm_sleep_ptr to avoid ifdef CONFIG_PM_SLEEP ...
2023-02-24Merge tag 'for-v6.3' of ↵Linus Torvalds42-233/+2909
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply and reset updates from Sebastian Reichel: "Nothing special for the power-supply subystem this time. - power-supply core: remove faulty cooling logic - convert all sysfs show() handlers from *printf() use sysfs_emit() - bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro - bq27xxx: fix reporting critical level - syscon-reboot: add priority property support - new rt9467 charger driver - new rt9471 charger driver - new Odroid Go Ultra poweroff driver - misc minor fixes and cleanups" * tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits) power: reset: odroid-go-ultra: fix I2C dependency power: supply: leds: explicitly include linux/leds.h dt-bindings: power: supply: pm8941-coincell: Don't require charging properties dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatible power: reset: add Odroid Go Ultra poweroff driver power: supply: rt9467: Fix spelling mistake "attache" -> "attach" power: supply: rt9471: fix using wrong ce_gpio in rt9471_probe() power: supply: max77650: Make max77650_charger_disable() return void Documentation: power: rt9467: Document exported sysfs entries power: supply: rt9467: Add Richtek RT9467 charger driver dt-bindings: power: supply: Add Richtek RT9467 battery charger Documentation: power: rt9471: Document exported sysfs entries power: supply: rt9471: Add Richtek RT9471 charger driver dt-bindings: power: supply: Add Richtek RT9471 battery charger power: supply: max1721x: Use strscpy() is more robust and safer power: supply: test-power: use strscpy() instead of strncpy() power: supply: bq27xxx: fix reporting critical level power: supply: bq256xx: Init ichg/vbat value with chip default value power: supply: collie_battery: Convert to GPIO descriptors (part 2) power: supply: remove faulty cooling logic ...
2023-02-24Merge tag 'pci-v6.3-changes' of ↵Linus Torvalds66-811/+1570
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Rework portdrv shutdown so it disables interrupts but doesn't disable bus mastering, which leads to hangs on Loongson LS7A - Add mechanism to prevent Max_Read_Request_Size (MRRS) increases, again to avoid hardware issues on Loongson LS7A (and likely other devices based on DesignWare IP) - Ignore devices with a firmware (DT or ACPI) node that says the device is disabled Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. Tried this in v6.1 but had to revert for regressions, so try again - Fix root bus issue that dropped resources that happened to end at 0, e.g., [bus 00] PCI device hotplug: - Remove device locking when marking device as disconnected so this doesn't have to wait for concurrent driver bind/unbind to complete - Quirk more Qualcomm bridges that don't fully implement the PCIe Slot Status 'Command Completed' bit Power management: - Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we don't miss hot-add notifications for USB4 docks, Thunderbolt, etc Reset: - Observe delay after reset, e.g., resuming from system sleep, regardless of whether a bridge can suspend to D3cold at runtime - Wait for secondary bus to become ready after a bridge reset Virtualization: - Avoid FLR on some AMD FCH AHCI adapters where it doesn't work - Allow independent IOMMU groups for some Wangxun NICs that prevent peer-to-peer transactions but don't advertise an ACS Capability Error handling: - Configure End-to-End-CRC (ECRC) only if Linux owns the AER Capability - Remove redundant Device Control Error Reporting Enable in the AER service driver since this is already done for all devices during enumeration ASPM: - Add pci_enable_link_state() interface to allow drivers to enable ASPM link state Endpoint framework: - Move dra7xx and tegra194 linkup processing from hard IRQ to threaded IRQ handler - Add a separate lock for endpoint controller list of endpoint function drivers to prevent deadlock in callbacks - Pass events from endpoint controller to endpoint function drivers via callbacks instead of notifiers Synopsys DesignWare eDMA controller driver (acked by Vinod): - Fix CPU vs PCI address issues - Fix source vs destination address issues - Fix issues with interleaved transfer semantics - Fix channel count initialization issue (issue still exists in several other drivers) - Clean up and improve debugfs usage so it will work on platforms with several eDMA devices Baikal T-1 PCIe controller driver: - Set a 64-bit DMA mask Freescale i.MX6 PCIe controller driver: - Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support Intel VMD host bridge driver: - Add quirk to configure PCIe ASPM and LTR. This is normally done by BIOS, and will be for future products Marvell MVEBU PCIe controller driver: - Mark this driver as broken in Kconfig since bugs prevent its daily usage MediaTek MT7621 PCIe controller driver: - Delay PHY port initialization to improve boot reliability for ZBT WE1326, ZBT WF3526-P, and some Netgear models Qualcomm PCIe controller driver: - Add MSM8998 DT compatible string - Unify MSM8996 and MSM8998 clock orderings - Add SM8350 DT binding and driver support - Add IPQ8074 Gen3 DT binding and driver support - Correct qcom,perst-regs in DT binding - Add qcom_pcie_host_deinit() so the PHY is powered off and regulators and clocks are disabled on late host-init errors Socionext UniPhier Pro5 controller driver: - Clean up uniphier-ep reg, clocks, resets, and their names in DT binding Synopsys DesignWare PCIe controller driver: - Restrict coherent DMA mask to 32 bits for MSI, but allow controller drivers to set 64-bit streaming DMA mask - Add eDMA engine support in both Root Port and Endpoint controllers Miscellaneous: - Remove MODULE_LICENSE from boolean drivers so they don't look like modules so modprobe can complain about them" * tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits) PCI: dwc: Add Root Port and Endpoint controller eDMA engine support PCI: bt1: Set 64-bit DMA mask PCI: dwc: Restrict only coherent DMA mask for MSI address allocation dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it dmaengine: dw-edma: Add mem-mapped LL-entries support PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules PCI: hv: Drop duplicate PCI_MSI dependency PCI/P2PDMA: Annotate RCU dereference PCI/sysfs: Constify struct kobj_type pci_slot_ktype PCI: hotplug: Allow marking devices as disconnected during bind/unbind PCI: pciehp: Add Qualcomm quirk for Command Completed erratum PCI: qcom: Add IPQ8074 Gen3 port support dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port dt-bindings: PCI: qcom: Sort compatibles alphabetically PCI: qcom: Fix host-init error handling PCI: qcom: Add SM8350 support dt-bindings: PCI: qcom: Add SM8350 dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order ...
2023-02-25dt-bindings: power: supply: Revise Richtek RT9467 compatible nameChiaEn Wu1-3/+3
Revise RT9467 compatible name from "richtek,rt9467-charger" to "richtek,rt9467" because it has to match the "compatible name" in the source code. Fixes: e1b4620fb503 ("dt-bindings: power: supply: Add Richtek RT9467 battery charger") Reported-by: Rob Herring <[email protected]> Signed-off-by: ChiaEn Wu <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-02-25ABI: testing: sysfs-class-power: Document absence of "present" propertyBastien Nocera1-1/+2
Document how the absence of the "present" property in the sysfs power_supply class should be handled. Link: https://gitlab.freedesktop.org/upower/upower/-/merge_requests/173 Cc: Mario Limonciello <[email protected]> Signed-off-by: Bastien Nocera <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-02-25power: supply: fix null pointer check order in __power_supply_registerqinyu1-3/+3
There is an null pointer check order issue here: if we have to check !desc and !desc->name anyway, check it before dereferencing it in pr_warn(). Signed-off-by: qinyu <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2023-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds65-1597/+2112
Pull rdma updates from Jason Gunthorpe: "Quite a small cycle this time, even with the rc8. I suppose everyone went to sleep over xmas. - Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw, mana - inline CQE support for hns - Have mlx5 display device error codes - Pinned DMABUF support for irdma - Continued rxe cleanups, particularly converting the MRs to use xarray - Improvements to what can be cached in the mlx5 mkey cache" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits) IB/mlx5: Extend debug control for CC parameters IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors IB/hfi1: Fix math bugs in hfi1_can_pin_pages() RDMA/irdma: Add support for dmabuf pin memory regions RDMA/mlx5: Use query_special_contexts for mkeys net/mlx5e: Use query_special_contexts for mkeys net/mlx5: Change define name for 0x100 lkey value net/mlx5: Expose bits for querying special mkeys RDMA/rxe: Fix missing memory barriers in rxe_queue.h RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet RDMA/rxe: Remove rxe_alloc() RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size Subject: RDMA/rxe: Handle zero length rdma iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() RDMA/mlx5: Use rdma_umem_for_each_dma_block() RDMA/umem: Remove unused 'work' member from struct ib_umem RDMA/irdma: Cap MSIX used to online CPUs + 1 RDMA/mlx5: Check reg_create() create for errors RDMA/restrack: Correct spelling RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() ...
2023-02-24Merge tag 'for-linus-iommufd' of ↵Linus Torvalds27-134/+243
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd updates from Jason Gunthorpe: "Some polishing and small fixes for iommufd: - Remove IOMMU_CAP_INTR_REMAP, instead rely on the interrupt subsystem - Use GFP_KERNEL_ACCOUNT inside the iommu_domains - Support VFIO_NOIOMMU mode with iommufd - Various typos - A list corruption bug if HWPTs are used for attach" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Do not add the same hwpt to the ioas->hwpt_list twice iommufd: Make sure to zero vfio_iommu_type1_info before copying to user vfio: Support VFIO_NOIOMMU with iommufd iommufd: Add three missing structures in ucmd_buffer selftests: iommu: Fix test_cmd_destroy_access() call in user_copy iommu: Remove IOMMU_CAP_INTR_REMAP irq/s390: Add arch_is_isolated_msi() for s390 iommu/x86: Replace IOMMU_CAP_INTR_REMAP with IRQ_DOMAIN_FLAG_ISOLATED_MSI genirq/msi: Rename IRQ_DOMAIN_MSI_REMAP to IRQ_DOMAIN_ISOLATED_MSI genirq/irqdomain: Remove unused irq_domain_check_msi_remap() code iommufd: Convert to msi_device_has_isolated_msi() vfio/type1: Convert to iommu_group_has_isolated_msi() iommu: Add iommu_group_has_isolated_msi() genirq/msi: Add msi_device_has_isolated_msi()
2023-02-24Merge tag 'iommu-updates-v6.3' of ↵Linus Torvalds63-646/+2493
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Consolidate iommu_map/unmap functions. There have been blocking and atomic variants so far, but that was problematic as this approach does not scale with required new variants which just differ in the GFP flags used. So Jason consolidated this back into single functions that take a GFP parameter. - Retire the detach_dev() call-back in iommu_ops - Arm SMMU updates from Will: - Device-tree binding updates: - Cater for three power domains on SM6375 - Document existing compatible strings for Qualcomm SoCs - Tighten up clocks description for platform-specific compatible strings - Enable Qualcomm workarounds for some additional platforms that need them - Intel VT-d updates from Lu Baolu: - Add Intel IOMMU performance monitoring support - Set No Execute Enable bit in PASID table entry - Two performance optimizations - Fix PASID directory pointer coherency - Fix missed rollbacks in error path - Cleanups - Apple t8110 DART support - Exynos IOMMU: - Implement better fault handling - Error handling fixes - Renesas IPMMU: - Add device tree bindings for r8a779g0 - AMD IOMMU: - Various fixes for handling on SNP-enabled systems and handling of faults with unknown request-ids - Cleanups and other small fixes - Various other smaller fixes and cleanups * tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits) iommu/amd: Skip attach device domain is same as new domain iommu: Attach device group to old domain in error path iommu/vt-d: Allow to use flush-queue when first level is default iommu/vt-d: Fix PASID directory pointer coherency iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode iommu/vt-d: Fix error handling in sva enable/disable paths iommu/amd: Improve page fault error reporting iommu/amd: Do not identity map v2 capable device when snp is enabled iommu: Fix error unwind in iommu_group_alloc() iommu/of: mark an unused function as __maybe_unused iommu: dart: DART_T8110_ERROR range should be 0 to 5 iommu/vt-d: Enable IOMMU perfmon support iommu/vt-d: Add IOMMU perfmon overflow handler support iommu/vt-d: Support cpumask for IOMMU perfmon iommu/vt-d: Add IOMMU perfmon support iommu/vt-d: Support Enhanced Command Interface iommu/vt-d: Retrieve IOMMU perfmon capability information iommu/vt-d: Support size of the register set in DRHD iommu/vt-d: Set No Execute Enable bit in PASID table entry iommu/vt-d: Remove sva from intel_svm_dev ...
2023-02-24Merge tag 'devicetree-for-6.3' of ↵Linus Torvalds102-825/+2336
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DT core: - Add node lifecycle unit tests - Add of_property_present() helper aligned with fwnode API - Print more information on reserved regions on boot - Update dtc to upstream v1.6.1-66-gabbd523bae6e - Use strscpy() to instead of strncpy() in DT core - Add option for schema validation on %.dtb targets Bindings: - Add/fix support for listing multiple patterns in DT_SCHEMA_FILES - Rework external memory controller/bus bindings to properly support controller specific child node properties - Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT schema format - Add RiscV SBI PMU event mapping binding - Add missing contraints on Arm SCMI child node allowed properties - Add a bunch of missing Socionext UniPhier glue block bindings and example fixes - Various fixes for duplicate or conflicting type definitions on DT properties" * tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits) dt-bindings: regulator: Add mps,mpq7932 power-management IC of: dynamic: Fix spelling mistake "kojbect" -> "kobject" dt-bindings: drop Sagar Kadam from SiFive binding maintainership dt-bindings: sram: qcom,imem: document sm8450 dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema dt-bindings: arm: Add Cortex-A715 and X3 of: dynamic: add lifecycle docbook info to node creation functions of: add consistency check to of_node_release() of: do not use "%pOF" printk format on node with refcount of zero of: unittest: add node lifecycle tests of: update kconfig unittest help of: add processing of EXPECT_NOT to of_unittest_expect of: prepare to add processing of EXPECT_NOT to of_unittest_expect of: Use preferred of_property_read_* functions of: Use of_property_present() helper of: Add of_property_present() helper of: reserved_mem: Use proper binary prefix dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES of: reserved-mem: print out reserved-mem details during boot dt-bindings: serial: restrict possible child node names ...
2023-02-24Merge tag 'driver-core-6.3-rc1' of ↵Linus Torvalds182-1186/+1532
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.3-rc1. There's a lot of changes this development cycle, most of the work falls into two different categories: - fw_devlink fixes and updates. This has gone through numerous review cycles and lots of review and testing by lots of different devices. Hopefully all should be good now, and Saravana will be keeping a watch for any potential regression on odd embedded systems. - driver core changes to work to make struct bus_type able to be moved into read-only memory (i.e. const) The recent work with Rust has pointed out a number of areas in the driver core where we are passing around and working with structures that really do not have to be dynamic at all, and they should be able to be read-only making things safer overall. This is the contuation of that work (started last release with kobject changes) in moving struct bus_type to be constant. We didn't quite make it for this release, but the remaining patches will be finished up for the release after this one, but the groundwork has been laid for this effort. Other than that we have in here: - debugfs memory leak fixes in some subsystems - error path cleanups and fixes for some never-able-to-be-hit codepaths. - cacheinfo rework and fixes - Other tiny fixes, full details are in the shortlog All of these have been in linux-next for a while with no reported problems" [ Geert Uytterhoeven points out that that last sentence isn't true, and that there's a pending report that has a fix that is queued up - Linus ] * tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits) debugfs: drop inline constant formatting for ERR_PTR(-ERROR) OPP: fix error checking in opp_migrate_dentry() debugfs: update comment of debugfs_rename() i3c: fix device.h kernel-doc warnings dma-mapping: no need to pass a bus_type into get_arch_dma_ops() driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place Revert "driver core: add error handling for devtmpfs_create_node()" Revert "devtmpfs: add debug info to handle()" Revert "devtmpfs: remove return value of devtmpfs_delete_node()" driver core: cpu: don't hand-override the uevent bus_type callback. devtmpfs: remove return value of devtmpfs_delete_node() devtmpfs: add debug info to handle() driver core: add error handling for devtmpfs_create_node() driver core: bus: update my copyright notice driver core: bus: add bus_get_dev_root() function driver core: bus: constify bus_unregister() driver core: bus: constify some internal functions driver core: bus: constify bus_get_kset() driver core: bus: constify bus_register/unregister_notifier() driver core: remove private pointer from struct bus_type ...
2023-02-24Merge tag 'char-misc-6.3-rc1' of ↵Linus Torvalds290-1959/+12531
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver subsystem updates from Greg KH: "Here is the large set of driver changes for char/misc drivers and other smaller driver subsystems that flow through this git tree. Included in here are: - New IIO drivers and features and improvments in that subsystem - New hwtracing drivers and additions to that subsystem - lots of interconnect changes and new drivers as that subsystem seems under very active development recently. This required also merging in the icc subsystem changes through this tree. - FPGA driver updates - counter subsystem and driver updates - MHI driver updates - nvmem driver updates - documentation updates - Other smaller driver updates and fixes, full details in the shortlog All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits) scripts/tags.sh: fix incompatibility with PCRE2 firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries mei: lower the log level for non-fatal failed messages mei: bus: disallow driver match while dismantling device misc: vmw_balloon: fix memory leak with using debugfs_lookup() nvmem: stm32: fix OPTEE dependency dt-bindings: nvmem: qfprom: add IPQ8074 compatible nvmem: qcom-spmi-sdam: register at device init time nvmem: rave-sp-eeprm: fix kernel-doc bad line warning nvmem: stm32: detect bsec pta presence for STM32MP15x nvmem: stm32: add OP-TEE support for STM32MP13x nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() nvmem: core: add nvmem_add_one_cell() nvmem: core: drop the removal of the cells in nvmem_add_cells() nvmem: core: move struct nvmem_cell_info to nvmem-provider.h nvmem: core: add an index parameter to the cell of: property: add #nvmem-cell-cells property of: property: make #.*-cells optional for simple props of: base: add of_parse_phandle_with_optional_args() net: add helper eth_addr_add() ...
2023-02-24Merge tag 'staging-6.3-rc1' of ↵Linus Torvalds72-2666/+1330
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here is the "boring" staging driver update for 6.3-rc1. Nothing major in here at all, it's just lots of tiny code cleanups to bring some of the staging drivers more in line with the real portion of the kernel (apis and coding style.) Overall we remove more lines of code than we add, always a nice result. The big work was done by Martin Kaiser and Philipp Hortmann, both tackling some of the older wifi drivers, removing unused code and structures and a file in one case. Full details of the changes are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (219 commits) staging: r8188eu: Revert "staging: r8188eu: simplify rtw_get_ff_hwaddr" staging: r8188eu: replace hand coded loop with list_for_each_entry staging: r8188eu: merge _rtw_enqueue_cmd into its caller most: add maintainer entry staging: rtl8192e: Use BIT() instead of << for bit field MSR_LINK_MASK staging: rtl8192e: Rename DM_RxPathSelTable staging: rtl8192e: Rename diff_TH and disabledRF staging: rtl8192e: Rename Enable, cck_Rx_path and SS_TH_low staging: rtl8192e: Rename RateAdaptiveTH.., VeryLowRSSI and WAIotTHVal staging: rtl8192e: Rename RxPathSelectio.., RateAdaptive.. and RateAdap.. staging: rtl8192e: Rename OFDM_Table.., CCK_Table_.. and RxPathSelecti.. staging: rtl8192e: Rename MacBlkCtrl and remove double definition staging: rtl8192e: Remove blank lines in r8192E_hw.h, rtl_core.h and .. staging: rtl8192e: Rename AcmHw_ViqEn, AcmHw_VoqEn and ANAPAR_FOR_8192PciE staging: r8188eu: bagg_pkt parameter is not used staging: r8188eu: simplify rtw_get_ff_hwaddr staging: r8188eu: simplify xmit_buf flags staging: r8188eu: xmit_buf's ff_hwaddr is not used staging: r8188eu: remove unused frametag defines staging: r8188eu: simplify rtw_alloc_xmitframe ...
2023-02-24block: be a bit more careful in checking for NULL bdev while pollingJens Axboe1-2/+8
Wei reports a crash with an application using polled IO: PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S 5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1 Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022 RIP: 0010:bio_poll+0x25/0x200 Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65 RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600 RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140 RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00 R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001 FS: 00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: iocb_bio_iopoll+0x1d/0x30 io_do_iopoll+0xac/0x250 __se_sys_io_uring_enter+0x3c5/0x5a0 ? __x64_sys_write+0x89/0xd0 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x94f225d Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7 RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007 RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008 R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 which is due to bio->bi_bdev being NULL. This can happen if we have two tasks doing polled IO, and task B ends up completing IO from task A if they are sharing a poll queue. If task B completes the IO and puts the bio into our cache, then it can allocate that bio again before task A is done polling for it. As that would necessitate a preempt between the two tasks, it's enough to just be a bit more careful in checking for whether or not bio->bi_bdev is NULL. Reported-and-tested-by: Wei Zhang <[email protected]> Cc: [email protected] Fixes: be4d234d7aeb ("bio: add allocation cache abstraction") Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2023-02-24block: clear bio->bi_bdev when putting a bio back in the cacheJens Axboe1-0/+1
This isn't strictly needed in terms of correctness, but it does allow polling to know if the bio has been put already by a different task and hence avoid polling something that we don't need to. Cc: [email protected] Fixes: be4d234d7aeb ("bio: add allocation cache abstraction") Reviewed-by: Keith Busch <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.