| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Two bug fixes
- a memory alignment fix in the s390 only hypfs code
- a fix for the generic percpu code that caused ftrace to break on
s390. This is not relevant for x86 but for all architectures that
use the generic percpu code"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
percpu: use notrace variant of preempt_disable/preempt_enable
s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment
|
|
This patch will fix regression caused by commit 1e793f6fc0db ("scsi:
megaraid_sas: Fix data integrity failure for JBOD (passthrough)
devices").
The problem was that the MEGASAS_IS_LOGICAL macro did not have braces
and as a result the driver ended up exposing a lot of non-existing SCSI
devices (all SCSI commands to channels 1,2,3 were returned as
SUCCESS-DID_OK by driver).
[mkp: clarified patch description]
Fixes: 1e793f6fc0db920400574211c48f9157a37e3945
Reported-by: Jens Axboe <[email protected]>
CC: [email protected]
Signed-off-by: Kashyap Desai <[email protected]>
Signed-off-by: Sumit Saxena <[email protected]>
Tested-by: Sumit Saxena <[email protected]>
Reviewed-by: Tomas Henzl <[email protected]>
Tested-by: Jens Axboe <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The three KVM patches that KVMGT needs.
Conflicts:
arch/x86/include/asm/kvm_page_track.h
arch/x86/kvm/mmu.c
|
|
If the DC clock is disabled before the attached IDMACs are properly
stopped the IDMACs may hang the IPU or even the whole system.
Make sure the IDMACs are in safe state by disabling the planes before
removal of the DC clock.
Also set the atomic parameter to false to stop calling the atomic_begin
hook, which does nothing useful as we immediately afterwards turn off
vblank interrupts and possibly send the pending vblank event.
Fixes: 33f14235302f (drm/imx: atomic phase 1: Use transitional atomic
CRTC and plane helpers)
Signed-off-by: Lucas Stach <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
|
|
If a command is aborted in the kernel but not in the adapter, it might be
considered complete and its DMA memory released, but it is still alive in
the adapter, which will trigger an invalid DMA access upon its completion
(in the DMA operations to deliver the command response to the driver).
On powerpc platforms with IOMMU/EEH capabilities, the problem is observed
during PCI device removal with ongoing IO requests -- which might trigger
an EEH event very often, pointing to a 'TCE Request Page Access Error'.
In that path, which is qla2x00_remove_one(), the commands are aborted in
qla2x00_abort_all_cmds(), which does not perform an abort in the adapter
as is done in qla2xxx_eh_abort() for example.
So, this patch changes qla2x00_abort_all_cmds() to abort commands in the
adapter too, with a call to qla2xxx_eh_abort(), which already implements
all the logic to submit abort requests and handle responses.
Reported-by: Naresh Bannoth <[email protected]>
Signed-off-by: Mauricio Faria de Oliveira <[email protected]>
Acked-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
When the driver is unloading, in qla2x00_remove_one(), there is a single
call/point in time to abort ongoing commands, qla2x00_abort_all_cmds(),
which is still several steps away from the call to scsi_remove_host().
If more commands continue to arrive and be processed during that
interval, when the driver is tearing down and releasing its structures,
it might potentially hit an oops due to invalid memory access:
Unable to handle kernel paging request for data at address 0x00000138
<...>
NIP [d000000004700a40] qla2xxx_queuecommand+0x80/0x3f0 [qla2xxx]
LR [d000000004700a10] qla2xxx_queuecommand+0x50/0x3f0 [qla2xxx]
So, fail commands in qla2xxx_queuecommand() if the UNLOADING bit is set.
Signed-off-by: Mauricio Faria de Oliveira <[email protected]>
Acked-by: Himanshu Madhani <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
Before calling task_release_itt() task data is memset to zero because of
which DDP context information is lost resulting in incorrect DDP
resource cleanup, to fix this call task_release_itt() before memset.
Signed-off-by: Varun Prakash <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
If we're using a shadow copy of a PCI device ROM, the shadow copy is in RAM
and the device never sees accesses to it and doesn't respond to it. We
don't have to route the shadow range to the PCI device, and the device
doesn't have to claim the range.
Previously we treated the shadow copy as though it were the ROM BAR, and we
failed to claim it because the region wasn't routed to the device:
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: Allocating resources
pci 0000:01:00.0: can't claim BAR 6 [mem 0x000c0000-0x000dffff]: no compatible bridge window
The failure path of pcibios_allocate_dev_rom_resource() cleared out the
resource start address, which also caused the following ioremap() warning:
WARNING: CPU: 0 PID: 116 at /build/linux-akdJXO/linux-4.8.0/arch/x86/mm/ioremap.c:121 __ioremap_caller+0x1ec/0x370
ioremap on RAM at 0x0000000000000000 - 0x000000000001ffff
Handle an option ROM shadow copy as RAM, without trying to insert it into
the iomem resource tree.
This fixes a regression caused by 0c0e0736acad ("PCI: Set ROM shadow
location in arch code, not in PCI core"), which appeared in v4.6. The
regression causes video device initialization to fail. This was reported
on AMD Turks, but it likely affects others as well.
Fixes: 0c0e0736acad ("PCI: Set ROM shadow location in arch code, not in PCI core")
Reported-and-tested-by: Vecu Bosseur <[email protected]>
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1627496
Link: https://bugzilla.kernel.org/show_bug.cgi?id=175391
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1352272
Signed-off-by: Bjorn Helgaas <[email protected]>
CC: [email protected] # v4.6+
|
|
ARC linux uses 2 distribution modes for common interrupts: round robin
mode (IDU_M_DISTRI_RR) and a simple destination mode (IDU_M_DISTRI_DEST).
The first one is used when more than 1 cores may handle a common interrupt
and the second one is used when only 1 core may handle a common interrupt.
However idu_irq_set_affinity() always sets IDU_M_DISTRI_RR for all affinity
values. But there is no sense in setting of such mode if only 1 core must
handle a common interrupt.
Signed-off-by: Yuriy Kolerov <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
This came up when reviewing code to address missing IRQ affinity
setting in AXS103 platform and/or implementing hierarchical IRQ domains
- smp_ipi_irq_setup() callers pass hwirq but in turn calls
request_percpu_irq() which expects a linux virq. So invoke
irq_find_mapping() to do the conversion
(also explicitify this in code by renaming the args appropriately)
- idu_of_init()/idu_cascade_isr() were similarly using linux virq where
hwirq is expected, so do the conversion using irqd_to_hwirq() helper
Signed-off-by: Yuriy Kolerov <[email protected]>
[vgupta: made changelog a bit concise a bit]
Signed-off-by: Vineet Gupta <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Four patches from Robin Murphy fix several issues with the recently
merged generic DT-bindings support for arm-smmu drivers
- A fix for a dead-lock issue in the VT-d driver, which shows up on
iommu hotplug
* tag 'iommu-fixes-v4.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix dead-locks in disable_dmar_iommu() path
iommu/arm-smmu: Fix out-of-bounds dereference
iommu/arm-smmu: Check that iommu_fwspecs are ours
iommu/arm-smmu: Don't inadvertently reject multiple SMMUv3s
iommu/arm-smmu: Work around ARM DMA configuration
|
|
For CONFIG_SERIAL_EARLYCON we need 800MHz for NPS SoC
The early console driver uses BASE_BAUD and not using dtb.
The default of 50MHz is NOT good for NPS SoC.
Signed-off-by: Noam Camus <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
Today we register to plat_smp_ops.clear() method which actually
is acking the IPI.
However this is already taking care by our irqchip driver specifically
by the irq_chip.irq_eoi() method.
This is perfect timing where it should be done and no special handling
is needed at plat_smp_ops.clear().
Signed-off-by: Noam Camus <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
This has caused a bunch of build failures at a few sites, with GNU
2015.12 and older as the assembler seems to need -mlock to be able to
grok llock/scond instructions for ARC700 builds.
different places since the
older tools still seem to release
of tools which most people are using seem to trip with the -mlock flag
not being passed.
This reverts commit c3005475889c7c730638f95d13be3360f0b33e98.
|
|
Returning -EINVAL from a bool-returning function
phm_check_smc_update_required_for_display_configuration has an unexpected
effect of returning true, which is probably not what was intended.
Replace -EINVAL by false.
The only place this function is called from is
psm_adjust_power_state_dynamic in
drivers/gpu/drm/amd/powerplay/eventmgr/psm.c:106:
if (!equal || phm_check_smc_update_required_for_display_configuration(hwmgr)) {
phm_apply_state_adjust_rules(hwmgr, requested, pcurrent);
phm_set_power_state(hwmgr, &pcurrent->hardware, &requested->hardware);
hwmgr->current_ps = requested;
}
It seems to expect a boolean value here.
This issue has been found using the following Coccinelle semantic patch
written by Peter Senna Tschudin:
<smpl>
@@
identifier f;
constant C;
typedef bool;
@@
bool f (...){
<+...
* return -C;
...+>
}
</smpl>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Andrew Shadura <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
A recent bugfix replaced an out-of-bounds access with direct
use of unintialized data:
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c: In function 'smu7_patch_limits_vddc':
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddc' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:11: note: 'vddc' was declared here
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2033:6: error: 'vddci' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c:2146:17: note: 'vddci' was declared here
uint32_t vddc, vddci;
This initializes the data as before using the correct type.
Fixes: 77f7f71f5be1 ("drm/amdgpu/powerplay/smu7: fix static checker warning")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
It turns out that the disable_dmar_iommu() code-path tried
to get the device_domain_lock recursivly, which will
dead-lock when this code runs on dmar removal. Fix both
code-paths that could lead to the dead-lock.
Fixes: 55d940430ab9 ('iommu/vt-d: Get rid of domain->iommu_lock')
Signed-off-by: Joerg Roedel <[email protected]>
|
|
When we iterate a master's config entries, what we generally care
about is the entry's stream map index, rather than the entry index
itself, so it's nice to have the iterator automatically assign the
former from the latter. Unfortunately, booting with KASAN reveals
the oversight that using a simple comma operator results in the
entry index being dereferenced before being checked for validity,
so we always access one element past the end of the fwspec array.
Flip things around so that the check always happens before the index
may be dereferenced.
Fixes: adfec2e709d2 ("iommu/arm-smmu: Convert to iommu_fwspec")
Reported-by: Mark Rutland <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
We seem to have forgotten to check that iommu_fwspecs actually belong to
us before we go ahead and dereference their private data. Oops.
Fixes: 021bb8420d44 ("iommu/arm-smmu: Wire up generic configuration support")
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
We now delay installing our per-bus iommu_ops until we know an SMMU has
successfully probed, as they don't serve much purpose beforehand, and
doing so also avoids fights between multiple IOMMU drivers in a single
kernel. However, the upshot of passing the return value of bus_set_iommu()
back from our probe function is that if there happens to be more than
one SMMUv3 device in a system, the second and subsequent probes will
wind up returning -EBUSY to the driver core and getting torn down again.
Avoid re-setting ops if ours are already installed, so that any genuine
failures stand out.
Fixes: 08d4ca2a672b ("iommu/arm-smmu: Support non-PCI devices with SMMUv3")
CC: Lorenzo Pieralisi <[email protected]>
CC: Hanjun Guo <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
The 32-bit ARM DMA configuration code predates the IOMMU core's default
domain functionality, and instead relies on allocating its own domains
and attaching any devices using the generic IOMMU binding to them.
Unfortunately, it does this relatively early on in the creation of the
device, before we've seen our add_device callback, which leads us to
attempt to operate on a half-configured master.
To avoid a crash, check for this situation on attach, but refuse to
play, as there's nothing we can do. This at least allows VFIO to keep
working for people who update their 32-bit DTs to the generic binding,
albeit with a few (innocuous) warnings from the DMA layer on boot.
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Joerg Roedel <[email protected]>
|
|
Currently the ALSA proc handler allows read or write even if the proc
file were write-only or read-only. It's mostly harmless, does thing
but allocating memory and ignores the input/output. But it doesn't
tell user about the invalid use, and it's confusing and inconsistent
in comparison with other proc files.
This patch adds some sanity checks and let the proc handler returning
an -EIO error when the invalid read/write is performed.
Cc: <[email protected]> # v4.2+
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The ALSA proc handler allows currently the write in the unlimited size
until kmalloc() fails. But basically the write is supposed to be only
for small inputs, mostly for one line inputs, and we don't have to
handle too large sizes at all. Since the kmalloc error results in the
kernel warning, it's better to limit the size beforehand.
This patch adds the limit of 16kB, which must be large enough for the
currently existing code.
Cc: [email protected] # v4.2+
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Commit 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like
events do") added a couple of this_cpu_read calls to the ftrace code.
On x86 this is not a problem, since it has single instructions to read
percpu data. Other architectures which use the generic variant now
have additional preempt_disable and preempt_enable calls in the core
ftrace code. This may lead to recursive calls and in result to a dead
machine, e.g. if preemption and debugging options are enabled.
To fix this use the notrace variant of preempt_disable and
preempt_enable within the generic percpu code.
Reported-and-bisected-by: Sebastian Ott <[email protected]>
Tested-by: Sebastian Ott <[email protected]>
Fixes: 345ddcc882d8 ("ftrace: Have set_ftrace_pid use the bitmap like events do")
Signed-off-by: Heiko Carstens <[email protected]>
Acked-by: Steven Rostedt <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
|
|
Fix the following warn:
fs/nfs/nfs4session.c: In function ‘nfs4_slot_seqid_in_use’:
fs/nfs/nfs4session.c:203:54: warning: ‘cur_seq’ may be used uninitialized in this function [-Wmaybe-uninitialized]
if (nfs4_slot_get_seqid(tbl, slotid, &cur_seq) == 0 &&
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
cur_seq == seq_nr && test_bit(slotid, tbl->used_slots))
~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
We used to check for a valid layout type id before verifying pNFS flags
as an indicator for if we are using pNFS. This changed in 3132e49ece
with the introduction of multiple layout types, since now we are passing
an array of ids instead of just one. Since then, users have been seeing
a KERN_ERR printk show up whenever mounting NFS v4 without pNFS. This
patch restores the original behavior of exiting set_pnfs_layoutdriver()
early if we aren't using pNFS.
Fixes 3132e49ece ("pnfs: track multiple layout types in fsinfo
structure")
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
cl_rpcclient starts as ERR_PTR(-EINVAL), and connections like that
are floating freely through the system. Most places check whether
pointer is valid before dereferencing it, but newly added code
in nfs_match_client does not.
Which causes crashes when more than one NFS mount point is present.
Signed-off-by: Petr Vandrovec <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
We need to hold the rcu_read_lock() when calling rcu_dereference(),
otherwise we can't guarantee that the object being dereferenced still
exists.
Fixes: 39e5d2df ("SUNRPC search xprt switch for sockaddr")
Signed-off-by: Anna Schumaker <[email protected]>
|
|
The current code doesn't even compile as somehow the inline assembly
can't see the register names defined as ARC_RTC_*
I'm pretty sure It worked when I first got it merged, but the tools were
definitely different then.
So better to write this in "C" anyways.
CC: [email protected] #4.2+
Acked-by: Daniel Lezcano <[email protected]>
Signed-off-by: Vineet Gupta <[email protected]>
|
|
The original syscall only used to return errno to indicate if cmpxchg
succeeded. It was not returning the "previous" value which typical cmpxchg
callers are interested in to build their slowpaths or retry loops.
Given user preemption in syscall return path etc, it is not wise to
check this in userspace afterwards, but should be what kernel actually
observed in the syscall.
So change the syscall interface to always return the previous value and
additionally set Z flag to indicate whether operation succeeded or not
(just like ARM implementation when they used to have this syscall)
The flag approach avoids having to put_user errno which is nice given
the use case for this syscall cares mostly about the "previous" value.
Signed-off-by: Vineet Gupta <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Will Deacon:
"It's been pretty quiet on the fixes side of things for us, but Artem
reported a build failure introduced during the merge window that
appears with older GCCs that do not support asm goto. The fix is
bigger than I'd like, but it's a mechnical move of some constants to
break an include dependency between atomic.h and jump_label.h when
!HAVE_JUMP_LABEL.
Summary:
- Fix build failure on compilers without asm goto"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix circular include of asm/lse.h through linux/jump_label.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull openrisc fix from Guenter Roeck:
"Fix openrisc crash caused by ro_init changes"
* tag 'openrisc-for-linus-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
openrisc: Define __ro_after_init to avoid crash
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix resource leak on devm_kcalloc failure"
* tag 'hwmon-for-linus-v4.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (core) fix resource leak on devm_kcalloc failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- modprobe-after-rmmod load failure bugfix for intel-ish, from Even Xu
- IRQ probing bugfix for intel-ish, from Srinivas Pandruvada
- attribute parsing fix in hid-sensor, from Ooi, Joyce
- other small misc fixes / quirky device additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: sensor: fix attributes in HID sensor interface
HID: intel-ish-hid: request_irq failure
HID: intel-ish-hid: Fix driver reinit failure
HID: intel-ish-hid: Move DMA disable code to new function
HID: intel-ish-hid: consolidate ish wake up operation
HID: usbhid: add ATEN CS962 to list of quirky devices
HID: intel-ish-hid: Fix !CONFIG_PM build warning
HID: sensor-hub: Fix packing of result buffer for feature report
|
|
On CZ/ST systems with AZ rather than ACP audio, we need to bail
early in hw_fini since there is nothing to do.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=98276
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Valleyview appears to be limited to only scanning out from the first 512MiB
of the Global GTT. Lets presume that this behaviour was inherited from the
display block copied from g4x (not Ironlake) and all earlier generations
are similarly affected, though testing suggests different symptoms. For
simplicity, impose that these platforms must scanout from the mappable
region. (For extra simplicity, use HAS_GMCH_DISPLAY even though this
catches Cherryview which does not appear to be limited to the low
aperture for its scanout.)
v2: Use HAS_GMCH_DISPLAY() to more clearly convey my intent about
limiting this workaround to the old style of display engine.
v3: Update changelog to reflect testing by Ville Syrjälä
v4: Include the changes to the comments as well
Reported-by: Luis Botello <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98036
Fixes: 2efb813d5388 ("drm/i915: Fallback to using unmappable memory for scanout")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Akash Goel <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: <[email protected]> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Ville Syrjälä <[email protected]>
(cherry picked from commit 767a222e47cc13239d38018887f911fec06169ea)
Signed-off-by: Jani Nikula <[email protected]>
|
|
When we split a large object up into chunks for GTT faulting (because we
can't fit the whole object into the aperture) we have to align our cuts
with the fence registers. Each partial VMA must cover a complete set of
tile rows or the offset into each partial VMA is not aligned with the
whole image. Currently we enforce a minimum size on each partial VMA,
but this minimum size itself was not aligned to the tile row causing
distortion.
Reported-by: Andreas Reis <[email protected]>
Reported-by: Chris Clayton <[email protected]>
Reported-by: Norbert Preining <[email protected]>
Tested-by: Norbert Preining <[email protected]>
Tested-by: Chris Clayton <[email protected]>
Fixes: 03af84fe7f48 ("drm/i915: Choose partial chunksize based on tile row size")
Fixes: a61007a83a46 ("drm/i915: Fix partial GGTT faulting") # enabling patch
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98402
Testcase: igt/gem_mmap_gtt/medium-copy-odd
Signed-off-by: Chris Wilson <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: <[email protected]> # v4.9-rc1+
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Joonas Lahtinen <[email protected]>
(cherry picked from commit 0ef723cbceb6dce8116e75d44c5b8679b2eba69a)
Signed-off-by: Jani Nikula <[email protected]>
|
|
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
Let's apply this work around to GEN9 platforms too, as it fixes the same
issue.
v2: Move drm_device to drm_i915_private conversion
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97907
Cc: [email protected]
Cc: Libin Yang <[email protected]>
Signed-off-by: Dhinakaran Pandiyan <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit 9c7540241885838cfc7fa58c4a8bd75be0303ed1)
Signed-off-by: Jani Nikula <[email protected]>
|
|
According to BSpec, cdclk for BDW has to be not less than 432 MHz with DP
audio enabled, port width x4, and link rate HBR2 (5.4 GHz). With cdclk less
than 432 MHz, enabling audio leads to pipe FIFO underruns and displays
cycling on/off.
From BSpec:
"Display» BDW-SKL» dpr» [Register] DP_TP_CTL [BDW+,EXCLUDE(CHV)]
Workaround : Do not use DisplayPort with CDCLK less than 432 MHz, audio
enabled, port width x4, and link rate HBR2 (5.4 GHz), or else there may
be audio corruption or screen corruption."
Since, some DP configurations (e.g., MST) use port width x4 and HBR2
link rate, let's increase the cdclk to >= 432 MHz to enable audio for those
cases.
v4: Changed commit message
v3: Combine BDW pixel rate adjustments into a function (Jani)
v2: Restrict fix to BDW
Retain the set cdclk across modesets (Ville)
Cc: [email protected]
Signed-off-by: Dhinakaran Pandiyan <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Reviewed-by: Jani Nikula <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit b30ce9e0552aa017ac6f2243f3c2d8e36fe52e69)
Signed-off-by: Jani Nikula <[email protected]>
|
|
One of the CI machines began to run into issues with the hpd poller
suddenly waking up in the midst of the late suspend phase. It looks like
this is getting caused by the fact we now deinitialize power wells in
late suspend, which means that intel_hpd_poll_init() gets called in late
suspend causing polling to get re-enabled. So, when deinitializing power
wells on valleyview we now refrain from enabling polling in the midst of
suspend.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98040
Fixes: 19625e85c6ec ("drm/i915: Enable polling when we don't have hpd")
Signed-off-by: Lyude <[email protected]>
Cc: Ville Syrjälä <[email protected]>
Cc: Jani Saarinen <[email protected]>
Cc: Petry Latvala <[email protected]>
Reviewed-by: Ville Syrjälä <[email protected]>
Signed-off-by: Jani Nikula <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit b64b540931483cca3200d98756bed6ad0e01d75c)
Signed-off-by: Jani Nikula <[email protected]>
|
|
The VBT provides the platform a way to mix and match the DDI ports vs.
GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose
has no standard GMBUS pin assignment. However, there are machines out
there that use a non-standard mapping for the other ports as well.
Let's start trusting the VBT on this one for all ports on DDI platforms.
I've structured the code such that other platforms could easily start
using this as well, by simply filling in the ddi_port_info. IIRC there
may be CHV system that might actually need this.
v2: Include a commit message, include a debug message during init
Cc: [email protected]
Cc: Maarten Maathuis <[email protected]>
Tested-by: Maarten Maathuis <[email protected]>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877
Signed-off-by: Ville Syrjälä <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Jim Bride <[email protected]>
(cherry picked from commit e4ab73a13291fc844c9e24d5c347bd95818544d2)
Signed-off-by: Jani Nikula <[email protected]>
|
|
We recently refactored the Orangefs debugfs code.
The refactor seemed to trigger [email protected]'s
static tester to find a possible double-free in the code.
While designing the fix we saw a condition under which the
buffer being freed could also be overflowed.
We also realized how to rebuild the related debugfs file's
"contents" (a string) without deleting and re-creating the file.
This fix should eliminate the possible double-free, the
potential overflow and improve code readability.
Signed-off-by: Mike Marshall <[email protected]>
Signed-off-by: Martin Brandenburg <[email protected]>
|
|
An interrupt may occur right after devm_request_irq() is called and
prior to the spinlock initialization, leading to a kernel oops,
as the interrupt handler uses the spinlock.
In order to prevent this problem, move the spinlock initialization
prior to requesting the interrupts.
Fixes: e4243f13d10e (mmc: mxs-mmc: add mmc host driver for i.MX23/28)
Signed-off-by: Fabio Estevam <[email protected]>
Reviewed-by: Marek Vasut <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
In the eMMC 4.51 version of the spec, an EXT_CSD field called
GENERIC_CMD6_TIME[248] was added. This allows cards to specify the maximum
time it may need to move out from its busy state, when a CMD6 command has
been sent.
In cases when the card is compliant to versions < 4.51 of the eMMC spec,
obviously the core needs to use a fall-back value for this timeout, which
currently is set to 10 minutes. This value is completely in the wrong range
and importantly in some cases it causes a card initialization to take more
than 10 minute to complete.
Earlier this scenario was avoided as the mmc core used CMD13 to poll the
card, to find out when it stopped signaling busy. Commit 08573eaf1a70
("mmc: mmc: do not use CMD13 to get status after speed mode switch")
changed this behavior.
Instead of reverting that commit, which would cause other issues, let's
instead start by picking a simple solution for the problem, by using a
500ms default generic CMD6 timeout.
The reason for using exactly 500ms, comes from observations that shows it's
quite common for cards to specify 250ms. 500ms is two times that value so
likely it should be enough for most cards.
Cc: <[email protected]> # v4.8+
Fixes: 08573eaf1a70 ("mmc: mmc: do not use CMD13 to get status after speed
mode switch")
Signed-off-by: Ulf Hansson <[email protected]>
Tested-by: Stephen Boyd <[email protected]>
Tested-by: Linus Walleij <[email protected]>
|
|
mmc_test_check_result_async() requires that struct mmc_async_req is
contained within struct mmc_test_async_req. Fix the "Commands during
non-blocking write" tests so that is the case.
Fixes: 4bbb9aac9a9a ("mmc: mmc_test: Add tests for sending commands during transfer")
Signed-off-by: Adrian Hunter <[email protected]>
Tested-by: Ritesh Harjani <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
Restore enhanced strobe setting during runtime resume.
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
To prevent subsequent commands failing, ensure the cmd and data circuits
are reset after a tuning timeout.
Signed-off-by: Adrian Hunter <[email protected]>
Signed-off-by: Ulf Hansson <[email protected]>
|
|
In the busy response case (i.e. !host->data), an unexpected data interrupt
would result in clearing the data command as though it had completed but
without informing the upper layers and thus resulting in a hang. Fix by
only clearing the data command for data interrupts that are expected.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: [email protected] # v4.8+
Signed-off-by: Ulf Hansson <[email protected]>
|
|
CMD line reset during an ongoing data transfer can cause the data transfer
to hang. Fix by delaying the reset until the data transfer is finished.
Signed-off-by: Adrian Hunter <[email protected]>
Cc: [email protected] # v4.8+
Signed-off-by: Ulf Hansson <[email protected]>
|
|
This basicly reverts commit e534f3e9 (staging:nvec: Introduce the use of
the managed version of kzalloc). Serio struct should never by managed
because it is refcounted. Doing so will lead to a double free oops on module
remove.
Signed-off-by: Marc Dietrich <[email protected]>
Fixes: e534f3e9429f ("staging:nvec: Introduce the use of the managed version of kzalloc")
Cc: stable <[email protected]> # 3.15+
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|