aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-06-26ASoC: amd: yc: Fix non-functional mic on ASUS M5602RAVyacheslav Frantsishko1-0/+7
The Vivobook S 16X IPS needs a quirks-table entry for the internal microphone to function properly. Signed-off-by: Vyacheslav Frantsishko <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-24ASoC: mediatek: mt8195: Add platform entry for ETDM1_OUT_BE dai linkChen-Yu Tsai1-0/+1
Commit e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") removed the codec entry for the ETDM1_OUT_BE dai link entirely instead of replacing it with COMP_EMPTY(). This worked by accident as the remaining COMP_EMPTY() platform entry became the codec entry, and the platform entry became completely empty, effectively the same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything for platform entries. This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe() in sound/soc/mediatek/common/mtk-soundcard-driver.c: for_each_card_prelinks(card, i, dai_link) { if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF"))) dai_link->platforms->of_node = adsp_node; else if (!dai_link->platforms->name && !dai_link->platforms->of_node) dai_link->platforms->of_node = platform_node; } where the code expects the platforms array to have space for at least one entry. Add an COMP_EMPTY() entry so that dai_link->platforms has space. Fixes: e70b8dd26711 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link") Signed-off-by: Chen-Yu Tsai <[email protected]> Reviewed-by: AngeloGioacchino Del Regno <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-20ASoC: fsl-asoc-card: set priv->pdev before using itElinor Montmasson1-1/+2
priv->pdev pointer was set after being used in fsl_asoc_card_audmux_init(). Move this assignment at the start of the probe function, so sub-functions can correctly use pdev through priv. fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the dev struct, used with dev_err macros. As priv is zero-initialised, there would be a NULL pointer dereference. Note that if priv->dev is dereferenced before assignment but never used, for example if there is no error to be printed, the driver won't crash probably due to compiler optimisations. Fixes: 708b4351f08c ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support") Signed-off-by: Elinor Montmasson <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: amd: acp: move chip->flag variable assignmentVijendar Mukunda1-1/+1
chip->flag variable assignment will be skipped when acp platform device creation is skipped. In this case chip>flag value will not be set. chip->flag variable should be assigned along with other structure variables for 'chip' structure. Move chip->flag variable assignment prior to acp platform device creation. Fixes: 3a94c8ad0aae ("ASoC: amd: acp: add code for scanning acp pdm controller") Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: amd: acp: remove i2s configuration check in acp_i2s_probe()Vijendar Mukunda1-8/+0
ACP supports different pin configurations for I2S IO. Checking ACP pin configuration value against specific value breaks the functionality for other I2S pin configurations. This check is no longer required in i2s dai driver probe call as i2s configuration check will be verified during acp platform device creation sequence. Remove i2s_mode check in acp_i2s_probe() function. Fixes: b24484c18b10 ("ASoC: amd: acp: ACP code generic to support newer platforms") Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-19ASoC: amd: acp: add a null check for chip_pdev structureVijendar Mukunda1-4/+6
When acp platform device creation is skipped, chip->chip_pdev value will remain NULL. Add NULL check for chip->chip_pdev structure in snd_acp_resume() function to avoid null pointer dereference. Fixes: 088a40980efb ("ASoC: amd: acp: add pm ops support for acp pci driver") Signed-off-by: Vijendar Mukunda <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-18ASoC: Intel: soc-acpi: mtl: fix speaker no sound on Dell SKU 0C64Shuming Fan1-1/+1
Dell SKU 0C64 has a single rt1318 amplifier. The prefix name of control still needs to be set rt1318-1 corresponding to UCM config. Signed-off-by: Shuming Fan <[email protected]> Reviewed-by: Bard Liao <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-14ASoC: q6apm-lpass-dai: close graph on prepare errorsSrinivas Kandagatla1-12/+20
There is an issue around with error handling and graph management with the exising code, none of the error paths close the graph, which result in leaving the loaded graph in dsp, however the driver thinks otherwise. This can have a nasty side effect specially when we try to load the same graph to dsp, dsp returns error which leaves the board with no sound and requires restart. Fix this by properly closing the graph when we hit errors between open and close. Fixes: 30ad723b93ad ("ASoC: qdsp6: audioreach: add q6apm lpass dai support") Signed-off-by: Srinivas Kandagatla <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Tested-by: Dmitry Baryshkov <[email protected]> # X13s Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-14ASoC: cs35l56: Disconnect ASP1 TX sources when ASP1 DAI is hooked upRichard Fitzgerald1-0/+4
If the ASP1 DAI is hooked up by the machine driver the ASP TX mixer sources should be initialized to disconnected. There aren't currently any available products using the ASP so this doesn't affect any existing systems. The cs35l56 does not have any fixed default for the mixer source registers. When the cs35l56 boots, its firmware patches these registers to setup a system-specific routing; this is so that Windows can use generic SDCA drivers instead of needing knowledge of chip-specific registers. The setup varies between end-products, which each have customized firmware, and so the default register state varies between end-products. It can also change if the firmware on an end-product is upgraded - for example if a change was needed to the routing for Windows use-cases. It must be emphasized that the settings applied by the firmware are not internal magic tuning; they are statically implementing use-case setup that on Linux would be done via ALSA controls. The driver is currently syncing the mixer controls with whatever initial state the firmware wrote to the registers, so that they report the actual audio routing. But if the ASP DAI is hooked up this can create a powered-up DAPM graph without anything intentionally setting up a path. This can lead to parts of the audio system powering up unexpectedly. For example when cs35l56 is connected to cs42l43 using a codec-codec link, this can create a complete DAPM graph which then powers-up cs42l43. But the cs42l43 can only be clocked from its SoundWire bus so this causes a bunch of errors in the kernel log where cs42l43 is unexpectedly powered-up without a clock. If the host is taking ownership of the ASP (either directly or as a codec-to-codec link) there is no need to keep the mixer settings that the firmware wrote. The driver has ALSA controls for setting these using standard Linux mechanisms. So if the machine driver hooks up the ASP the ASP mixers are initialized to "None" (no input). This prevents unintended DAPM-graph power-ups, and means the initial state of the mixers is always going to be None. Since the initial state of the mixers can vary from system to system and potentially between firmware upgrades, no use-case manager can currently assume that cs35l56 has a known initial state. The firmware could just as easily default them to "None" as to any input source. So defaulting them to "None" in the driver is not increasing the entropy of the system. Signed-off-by: Richard Fitzgerald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-13ASoC: topology: Fix route memory corruptionAmadeusz Sławiński1-9/+3
It was reported that recent fix for memory corruption during topology load, causes corruption in other cases. Instead of being overeager with checking topology, assume that it is properly formatted and just duplicate strings. Reported-by: Pierre-Louis Bossart <[email protected]> Closes: https://lore.kernel.org/linux-sound/[email protected]/T/#m8c4bd5abf453960fde6f826c4b7f84881da63e9d Suggested-by: Péter Ujfalusi <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-12ASoC: rt722-sdca-sdw: add debounce time for type detectionJack Yu1-1/+1
Add debounce time in headset type detection for better performance. Signed-off-by: Jack Yu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-12ASoC: SOF: sof-audio: Skip unprepare for in-use widgets on error rollbackPeter Ujfalusi1-1/+1
If the ipc_prepare() callback fails for a module instance, on error rewind we must skip the ipc_unprepare() call for ones that has positive use count. The positive use count means that the module instance is in active use, it cannot be unprepared. The issue affects capture direction paths with branches (single dai with multiple PCMs), the affected widgets are in the shared part of the paths. Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Reviewed-by: Ranjani Sridharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-12Fixes for McASP and dmaengine_pcmMark Brown4-2/+26
Merge series from Jai Luthra <[email protected]>: This series fixes two patches: 1. Fix the dmaengine API usage by calling dmaengine_synchronize() after dmaengine_terminate_async() when xrun events occur in application 2. Use the McASP AFIFO property from DT to refine the period size, instead of hardcoding minimum to 64 samples
2024-06-11ASoC: ti: omap-hdmi: Fix too long driver namePrimoz Fiser1-5/+1
Set driver name to "HDMI". This simplifies the code and gets rid of the following error messages: ASoC: driver name too long 'HDMI 58040000.encoder' -> 'HDMI_58040000_e' Signed-off-by: Primoz Fiser <[email protected]> Acked-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-11ASoC: ti: davinci-mcasp: Set min period size using FIFO configJai Luthra1-2/+7
The minimum period size was enforced to 64 as older devices integrating McASP with EDMA used an internal FIFO of 64 samples. With UDMA based platforms this internal McASP FIFO is optional, as the DMA engine internally does some buffering which is already accounted for when registering the platform. So we should read the actual FIFO configuration (txnumevt/rxnumevt) instead of hardcoding frames.min to 64. Acked-by: Peter Ujfalusi <[email protected]> Signed-off-by: Jai Luthra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-11ALSA: dmaengine: Synchronize dma channel after drop()Jai Luthra3-0/+19
Sometimes the stream may be stopped due to XRUN events, in which case the userspace can call snd_pcm_drop() and snd_pcm_prepare() to stop and start the stream again. In these cases, we must wait for the DMA channel to synchronize before marking the stream as prepared for playback, as the DMA channel gets stopped by drop() without any synchronization. Make sure the ALSA core synchronizes the DMA channel by adding a sync_stop() hook. Reviewed-by: Peter Ujfalusi <[email protected]> Signed-off-by: Jai Luthra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-11ASoC: topology: Fix route memory corruptionMark Brown2-23/+37
Merge series from Amadeusz Sławiński <[email protected]>: Originally reported here: https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605 There is various level of failure there, first of all when topology loads routes, it points directly into FW file, but it may be freed after topology load. After fixing the above, when avs driver parses topology it should allocate its own memory, as target strings can be shorter than needed. Also clean up soc_tplg_dapm_graph_elems_load() a bit.
2024-06-10bytcr_rt5640 : inverse jack detect for Archos 101 cesiumThomas GENTY1-0/+11
When headphones are plugged in, they appear absent; when they are removed, they appear present. Add a specific entry in bytcr_rt5640 for this device Signed-off-by: Thomas GENTY <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Acked-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-10ASoC: topology: Clean up route loadingAmadeusz Sławiński1-18/+8
Instead of using very long macro name, assign it to shorter variable and use it instead. While doing that, we can reduce multiple if checks using this define to one. Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-10ASoC: topology: Do not assign fields that are already setAmadeusz Sławiński1-5/+1
The routes are allocated with kzalloc(), so all fields are zeroed by default, skip unnecessary assignments. Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-10ASoC: Intel: avs: Fix route overrideAmadeusz Sławiński1-4/+15
Instead of overriding existing memory strings that may be too short, just allocate needed memory and point the route at it. Reported-by: Jason Montleon <[email protected]> Link: https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605 Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-10ASoC: topology: Fix references to freed memoryAmadeusz Sławiński1-5/+22
Most users after parsing a topology file, release memory used by it, so having pointer references directly into topology file contents is wrong. Use devm_kmemdup(), to allocate memory as needed. Reported-by: Jason Montleon <[email protected]> Link: https://github.com/thesofproject/avs-topology-xml/issues/22#issuecomment-2127892605 Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-06ASoC: atmel: atmel-classd: Re-add dai_link->platform to fix card initAndrei Simion1-2/+5
The removed dai_link->platform component cause a fail which is exposed at runtime. (ex: when a sound tool is used) This patch re-adds the dai_link->platform component to have a full card registered. Before this patch: :~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 :~$ speaker-test -t sine speaker-test 1.2.6 Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Sine wave rate is 440.0000Hz Playback open error: -22,Invalid argument After this patch which restores the platform component: :~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: CLASSD [CLASSD], device 0: CLASSD PCM snd-soc-dummy-dai-0 [CLASSD PCM snd-soc-dummy-dai-0] Subdevices: 1/1 Subdevice #0: subdevice #0 -> Resolve the playback error. Fixes: 2f650f87c03c ("ASoC: atmel: remove unnecessary dai_link->platform") Signed-off-by: Andrei Simion <[email protected]> Acked-by: Kuninori Morimoto <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-05ASoC: mediatek: mt8183-da7219-max98357: Fix kcontrol name collisionHsin-Te Yuan1-5/+5
Since "Headphone Switch" kcontrol name has already been used by da7219, rename the control name from "Headphone" to "Headphones" to prevent the colision. Also, this change makes kcontrol name align with the one in mt8186-mt6366-da7219-max98357.c. Fixes: 9c7388baa2053 ("ASoC: mediatek: mt8183-da7219-max98357: Map missing jack kcontrols") Change-Id: I9ae69a4673cd04786b247cc514fdd20f878ef009 Signed-off-by: Hsin-Te Yuan <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-05ASoC: rockchip: i2s-tdm: Fix trcm mode by setting clock on right mclkAlibek Omarov1-2/+11
When TRCM mode is enabled, I2S RX and TX clocks are synchronized through selected clock source. Without this fix BCLK and LRCK might get parented to an uninitialized MCLK and the DAI will receive data at wrong pace. However, unlike in original i2s-tdm driver, there is no need to manually synchronize mclk_rx and mclk_tx, as only one gets used anyway. Tested on a board with RK3568 SoC and Silergy SY24145S codec with enabled and disabled TRCM mode. Fixes: 9e2ab4b18ebd ("ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates") Signed-off-by: Alibek Omarov <[email protected]> Reviewed-by: Luca Ceresoli <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-04ASoC: SOF: Intel: hda-dai: skip tlv configuration forMark Brown1-2/+4
Merge series from Peter Ujfalusi <[email protected]>: The sof_ipc4_dma_config_tlv() call makes no sense in case of DSPless mode since it is a configuration for the firmware.
2024-06-04ASoC: codecs: ES8326: Solve headphone detection issueZhang Yi1-2/+6
When switching between OMTP and CTIA headset, we can hear pop noise. To solve this issue, We modified the configuration for headphone detection Signed-off-by: Zhang Yi <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-04ASoC: cs42l43: Increase default type detect time and button delayMaciej Strozek1-2/+2
Some problematic headsets have been discovered, to help with correctly identifying these, the detect time must be increased. Also improve the reliability of the impedance value from the button detect by slightly increasing the button detect delay. Fixes: 686b8f711b99 ("ASoC: cs42l43: Lower default type detect time") Signed-off-by: Maciej Strozek <[email protected]> Signed-off-by: Charles Keepax <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-04ASoC: qcom: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/qcom/snd-soc-qcom-sdw.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-03ASoC: rt722-sdca-sdw: add silence detection register as volatileJack Yu1-0/+2
Including silence detection register as volatile. Signed-off-by: Jack Yu <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-03ASoC: fsl: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/fsl/imx-pcm-dma.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-03ASoC: mxs: add missing MODULE_DESCRIPTION() macroJeff Johnson1-0/+1
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in sound/soc/mxs/snd-soc-mxs-pcm.o Add the missing invocation of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-03MAINTAINERS: copy linux-arm-msm for sound/qcom changesDmitry Baryshkov1-0/+1
Not having linux-arm-msm@ in cc for audio-related changes for Qualcomm platforms means that interested parties can easily miss the patches. Add corresponding L: entry so that linux-arm-msm ML gets CC'ed for audio patches too. Signed-off-by: Dmitry Baryshkov <[email protected]> Acked-by: Srinivas Kandagatla <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-03ASoC: SOF: Intel: hda-dai: remove skip_tlv labelBard Liao1-2/+1
We just return 0 after the skip_tlv label. No need to use a label. Signed-off-by: Bard Liao <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-03ASoC: SOF: Intel: hda-dai: skip tlv for dspless modeBard Liao1-0/+3
sof_ipc4_dma_config_tlv{} is for Audio DSP firmware only. Don't set it in dspless mode. Fixes: 17386cb1b48b ("ASoC: SOF: Intel: hda-dai: set dma_stream_channel_map device") Signed-off-by: Bard Liao <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Reviewed-by: Péter Ujfalusi <[email protected]> Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://msgid.link/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-06-02Linux 6.10-rc2Linus Torvalds1-1/+1
2024-06-02Merge tag 'ata-6.10-rc2' of ↵Linus Torvalds2-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fixes from Niklas Cassel: - Add a quirk for three different devices that have shown issues with LPM (link power management). These devices appear to not implement LPM properly, since we see command timeouts when enabling LPM. The quirk disables LPM for these problematic devices. (Me) - Do not apply the Intel PCS quirk on Alder Lake. The quirk is not needed and was originally added by mistake when LPM support was enabled for this AHCI controller. Enabling the quirk when not needed causes the the controller to not be able to detect the connected devices on some platforms. * tag 'ata-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: libata-core: Add ATA_HORKAGE_NOLPM for Apacer AS340 ata: libata-core: Add ATA_HORKAGE_NOLPM for AMD Radeon S3 SSD ata: libata-core: Add ATA_HORKAGE_NOLPM for Crucial CT240BX500SSD1 ata: ahci: Do not apply Intel PCS quirk on Intel Alder Lake
2024-06-02Merge tag 'x86-urgent-2024-06-02' of ↵Linus Torvalds4-12/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Miscellaneous topology parsing fixes: - Fix topology parsing regression on older CPUs in the new AMD/Hygon parser - Fix boot crash on odd Intel Quark and similar CPUs that do not fill out cpuinfo_x86::x86_clflush_size and zero out cpuinfo_x86::x86_cache_alignment as a result. Provide 32 bytes as a general fallback value. - Fix topology enumeration on certain rare CPUs where the BIOS locks certain CPUID leaves and the kernel unlocked them late, which broke with the new topology parsing code. Factor out this unlocking logic and move it earlier in the parsing sequence" * tag 'x86-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology/intel: Unlock CPUID before evaluating anything x86/cpu: Provide default cache line size if not enumerated x86/topology/amd: Evaluate SMT in CPUID leaf 0x8000001e only on family 0x17 and greater
2024-06-02Merge tag 'sched-urgent-2024-06-02' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Ingo Molnar: "Export a symbol to make life easier for instrumentation/debugging" * tag 'sched-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/x86: Export 'percpu arch_freq_scale'
2024-06-02Merge tag 'perf-urgent-2024-06-02' of ↵Linus Torvalds3-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf events fix from Ingo Molnar: "Add missing MODULE_DESCRIPTION() lines" * tag 'perf-urgent-2024-06-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Add missing MODULE_DESCRIPTION() lines perf/x86/rapl: Add missing MODULE_DESCRIPTION() line
2024-06-02Merge tag 'hardening-v6.10-rc2-take2' of ↵Linus Torvalds4-17/+11
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings - mailmap: update entry for Kees Cook - kunit/fortify: Remove __kmalloc_node() test * tag 'hardening-v6.10-rc2-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kunit/fortify: Remove __kmalloc_node() test mailmap: update entry for Kees Cook scsi: mpt3sas: Avoid possible run-time warning with long manufacturer strings
2024-06-01Merge tag 'powerpc-6.10-2' of ↵Linus Torvalds5-3/+54
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Enforce full ordering for ATOMIC operations with BPF_FETCH - Fix uaccess build errors seen with GCC 13/14 - Fix build errors on ppc32 due to ARCH_HAS_KERNEL_FPU_SUPPORT - Drop error message from lparcfg guest name lookup Thanks to Christophe Leroy, Guenter Roeck, Nathan Lynch, Naveen N Rao, Puranjay Mohan, and Samuel Holland. * tag 'powerpc-6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Limit ARCH_HAS_KERNEL_FPU_SUPPORT to PPC64 powerpc/uaccess: Use YZ asm constraint for ld powerpc/uaccess: Fix build errors seen with GCC 13/14 powerpc/pseries/lparcfg: drop error message from guest name lookup powerpc/bpf: enforce full ordering for ATOMIC operations with BPF_FETCH
2024-06-01Merge tag 'firewire-fixes-6.10-rc1' of ↵Linus Torvalds2-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fix from Takashi Sakamoto: "After merging a commit 1fffe7a34c89 ("script: modpost: emit a warning when the description is missing"), MODULE_DESCRIPTOR seems to be mandatory for kernel modules. In FireWire subsystem, the most of practical kernel modules have the field, while KUnit test modules do not. A single patch is applied to fix them" * tag 'firewire-fixes-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: add missing MODULE_DESCRIPTION() to test modules
2024-06-01Merge tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds5-1/+10
Pull smb client fixes from Steve French: "Two small smb3 fixes: - Fix socket creation with sfu mount option (spotted by test generic/423) - Minor cleanup: fix missing description in two files" * tag '6.10-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix creating sockets when using sfu mount options fs: smb: common: add missing MODULE_DESCRIPTION() macros
2024-06-01Merge tag 'kbuild-fixes-v6.10' of ↵Linus Torvalds9-41/+25
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix a Kconfig bug regarding comparisons to 'm' or 'n' - Replace missed $(srctree)/$(src) - Fix unneeded kallsyms step 3 - Remove incorrect "compatible" properties from image nodes in image.fit - Improve gen_kheaders.sh - Fix 'make dt_binding_check' - Clean up unnecessary code * tag 'kbuild-fixes-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: dt-bindings: kbuild: Fix dt_binding_check on unconfigured build kheaders: use `command -v` to test for existence of `cpio` kheaders: explicitly define file modes for archived headers scripts/make_fit: Drop fdt image entry compatible string kbuild: remove a stale comment about cleaning in link-vmlinux.sh kbuild: fix short log for AS in link-vmlinux.sh kbuild: change scripts/mksysmap into sed script kbuild: avoid unneeded kallsyms step 3 kbuild: scripts/gdb: Replace missed $(srctree)/$(src) w/ $(src) kconfig: remove redundant check in expr_join_or() kconfig: fix comparison to constant symbols, 'm', 'n' kconfig: remove unused expr_is_no()
2024-06-01Merge tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds11-46/+73
Pull xfs fixes from Chandan Babu: - Fix a livelock by dropping an xfarray sortinfo folio when an error is encountered - During extended attribute operations, Initialize transaction reservation computation based on attribute operation code - Relax symbolic link's ondisk verification code to allow symbolic links with short remote targets - Prevent soft lockups when unmapping file ranges and also during remapping blocks during a reflink operation - Fix compilation warnings when XFS is built with W=1 option * tag 'xfs-6.10-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: Add cond_resched to block unmap range and reflink remap path xfs: don't open-code u64_to_user_ptr xfs: allow symlinks with short remote targets xfs: fix xfs_init_attr_trans not handling explicit operation codes xfs: drop xfarray sortinfo folio on error xfs: Stop using __maybe_unused in xfs_alloc.c xfs: Clear W=1 warning in xfs_iwalk_run_callbacks()
2024-06-01Merge tag 'tty-6.10-rc2' of ↵Linus Torvalds1-49/+47
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fix from Greg KH: "Here is a single revert for a much-reported regression in 6.10-rc1 when it comes to a few older architectures. Turns out that the VT ioctls don't work the same across all cpu types because of some old compatibility requrements for stuff like alpha and powerpc. So revert the change that attempted to have them use the _IO() macros and go back to the known-working values instead. This has NOT been in linux-next but has had many reports that it fixes the issue with 6.10-rc1" * tag 'tty-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "VT: Use macros to define ioctls"
2024-06-01Merge tag 'landlock-6.10-rc2' of ↵Linus Torvalds2-2/+56
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock fix from Mickaël Salaün: "This fixes a wrong path walk triggered by syzkaller" * tag 'landlock-6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add layout1.refer_mount_root landlock: Fix d_parent walk
2024-06-01Revert "VT: Use macros to define ioctls"Greg Kroah-Hartman1-49/+47
This reverts commit 8c467f3300591a206fa8dcc6988d768910799872. Turns out this breaks many architectures as the vt ioctls do not all match up everywhere due to historical reasons, so the original commit is invalid for many values. Reported-by: Nick Bowler <[email protected]> Reported-by: Arnd Bergmann <[email protected]> Reported-by: Jiri Slaby <[email protected]> Reported-by: Christian Zigotzky <[email protected]> Reported-by: Michael Ellerman <[email protected]> Cc: Al Viro <[email protected]> Cc: Alexey Gladkov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-05-31Merge tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds39-114/+186
Pull drm fixes from Dave Airlie: "This is the weekly fixes. Lots of small fixes across the board, one BUG_ON fix in shmem seems most important, otherwise amdgpu, i915, xe mostly with small fixes to all the other drivers. shmem: - fix BUG_ON in COW handling - warn when trying to pin imported objects buddy: - fix page size handling dma-buf: - sw-sync: Don't interfere with IRQ handling - fix kthreads-handling error path i915: - fix a race in audio component by registering it later - make DPT object unshrinkable to avoid shrinking when framebuffer has not shrunk - fix CCS id calculation to fix a perf regression - fix selftest caching mode - fix FIELD_PREP compiler warnings - fix indefinite wait for GT wakeref release - revert overeager multi-gt pm reference removal xe: - pcode polling timeout change - fix for deadlocks for faulting VMs - error-path lock imbalance fix amdgpu: - RAS fix - fix colorspace property for MST connectors - fix for PCIe DPM - silence UBSAN warning - GPUVM robustness fix - partition fix - drop deprecated I2C_CLASS_SPD amdkfd: - revert unused changes for certain 11.0.3 devices - simplify APU VRAM handling lima: - fix dma_resv-related deadlock in object pin msm: - remove build-time dependency on Python 3.9 nouveau: - nvif: Fix possible integer overflow panel: - lg-sw43408: Select DP helpers; Declare backlight ops as static - sitronix-st7789v: Various fixes for jt240mhqs_hwt_ek_e3 panel panfrost: - fix dma_resv-related deadlock in object pin" * tag 'drm-fixes-2024-06-01' of https://gitlab.freedesktop.org/drm/kernel: (35 commits) drm/msm: remove python 3.9 dependency for compiling msm drm/panel: sitronix-st7789v: fix display size for jt240mhqs_hwt_ek_e3 panel drm/panel: sitronix-st7789v: tweak timing for jt240mhqs_hwt_ek_e3 panel drm/panel: sitronix-st7789v: fix timing for jt240mhqs_hwt_ek_e3 panel drm/amd/pm: remove deprecated I2C_CLASS_SPD support from newly added SMU_14_0_2 drm/amdgpu: Make CPX mode auto default in NPS4 drm/amdkfd: simplify APU VRAM handling Revert "drm/amdkfd: fix gfx_target_version for certain 11.0.3 devices" drm/amdgpu: fix dereference null return value for the function amdgpu_vm_pt_parent drm/amdgpu: silence UBSAN warning drm/amdgpu: Adjust logic in amdgpu_device_partner_bandwidth() drm/i915: Fix audio component initialization drm/i915/dpt: Make DPT object unshrinkable drm/i915/gt: Fix CCS id's calculation for CCS mode setting drm/panel/lg-sw43408: mark sw43408_backlight_ops as static drm/i915/selftests: Set always_coherent to false when reading from CPU drm/panel/lg-sw43408: select CONFIG_DRM_DISPLAY_DP_HELPER drm/i915/guc: avoid FIELD_PREP warning drm/i915/gt: Disarm breadcrumbs if engines are already idle Revert "drm/i915: Remove extra multi-gt pm-references" ...
Powered by cgit, Gruvboxed by Blaster4385.