aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-06-29serial: imx: Enable RTSD only when neededNandor Han1-1/+3
Currently, this IRQ is always enabled. Some devices might mux these pins to other I/Os, like I2C. This could lead to spurious interrupts. This commit makes this IRQ optional, by using the field have_rtscts. Signed-off-by: Nandor Han <[email protected]> Signed-off-by: Romain Perier <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-29serial: imx: Remove unused members from imx_port structFabio Estevam1-3/+0
IRDA support is gone since commit afe9cbb1a6ad ("serial: imx: drop support for IRDA"), so remove the remaining irda members from imx_port structure. While at it, also remove 'trcv_delay' which is also unused. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-29serial: 8250: 8250_omap: Fix race b/w dma completion and RX timeoutVignesh R1-2/+21
DMA RX completion handler for UART is called from a tasklet and hence may be delayed depending on the system load. In meanwhile, there may be RX timeout interrupt which can get serviced first before DMA RX completion handler is executed for the completed transfer. omap_8250_rx_dma_flush() which is called on RX timeout interrupt makes sure that the DMA RX buffer is pushed and then the FIFO is drained and also queues a new DMA request. But, when DMA RX completion handler executes, it will erroneously flush the currently queued DMA transfer which sometimes results in data corruption and double queueing of DMA RX requests. Fix this by checking whether RX completion is for the currently queued transfer or not. And also hold port lock when in DMA completion to avoid race wrt RX timeout handler preempting it. Signed-off-by: Vignesh R <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-29serial: 8250: Fix THRE flag usage for CAP_MINIPhil Elwell1-0/+4
The BCM2835 MINI UART has non-standard THRE semantics. Conventionally the bit means that the FIFO is empty (although there may still be a byte in the transmit register), but on 2835 it indicates that the FIFO is not full. This causes interrupts after every byte is transmitted, with the FIFO providing some interrupt latency tolerance. A consequence of this difference is that the usual strategy of writing multiple bytes into the TX FIFO after checking THRE once is unsafe. In the worst case of 7 bytes in the FIFO, writing 8 bytes loses all but the first since by then the FIFO is full. There is an HFIFO ("Hidden FIFO") capability that causes the transmit loop to terminate when both THRE and TEMT are set, i.e. when the TX block is completely idle. This is unnecessarily cautious, potentially causing gaps in transmission. Add a new conditional to the transmit loop, predicated on CAP_MINI, that exits when THRE is no longer set (the FIFO is full). This allows the FIFO to fill quickly but subsequent writes are paced by the transmission rate. Signed-off-by: Phil Elwell <[email protected]> Acked-by: Eric Anholt <[email protected]> Acked-by: Andy Shevchenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-20tty/serial: meson_uart: update to stable bindingsHelmut Klein1-6/+84
This patch handle the stable UART bindings but also keeps compatibility with the legacy non-stable bindings until all boards uses them. Reviewed-by: Jerome Brunet <[email protected]> Signed-off-by: Helmut Klein <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-20dt-bindings: serial: Add bindings for the Amlogic Meson UARTsHelmut Klein1-0/+38
Add the documentation for the device tree binding of Amlogic Meson Serial UART. Signed-off-by: Helmut Klein <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-20serial: Delete dead code for CIR serial portsMatthias Brugger1-17/+6
Commit e4fda3a04275 ("serial: don't register CIR serial ports") adds a check for PORT_8250_CIR to serial8250_register_8250_port(). But the code isn't needed as the function never takes the branch when the port is CIR serial port. This patch deletes the dead code. Signed-off-by: Matthias Brugger <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-20serial: sirf: make of_device_ids constArvind Yadav1-1/+1
of_device_ids are not supposed to change at runtime. All functions working with of_device_ids provided by <linux/of.h> work with const of_device_ids. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-20serial/mpsc: switch to dma_alloc_attrsChristoph Hellwig1-4/+6
Use dma_alloc_attrs directly instead of the dma_alloc_noncoherent wrapper. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-20tty: serial: Add Actions Semi Owl UART earlyconAndreas Färber4-0/+161
This implements an earlycon for Actions Semi S500/S900 SoCs. Based on LeMaker linux-actions tree. Signed-off-by: Andreas Färber <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-20dt-bindings: serial: Document Actions Semi Owl UARTsAndreas Färber1-0/+16
This UART is found on S500 and S900 SoCs. Acked-by: Rob Herring <[email protected]> Signed-off-by: Andreas Färber <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-14tty/serial: atmel: make the driver DT onlyAlexandre Belloni2-73/+33
Now that AVR32 is gone, platform_data are not used to initialize the driver anymore, remove that path from the driver. Also remove the now unused struct atmel_uart_data. Signed-off-by: Alexandre Belloni <[email protected]> Acked-by: Richard Genoud <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-14tty/serial: atmel: remove atmel_default_console_device handlingAlexandre Belloni1-43/+0
atmel_default_console_device was only used by AVR32, in particular arch/avr32/mach-at32ap/at32ap700x.c which is now gone. Remove it from the driver. Signed-off-by: Alexandre Belloni <[email protected]> Acked-by: Richard Genoud <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13tty: drop unused alt_speed from tty_structJohan Hovold1-1/+0
Drop the now unused alt_speed field from struct tty_struct. Setting an alt_speed using the ASYNC_SPD flags has been deprecated since v2.1.69, and has been broken for all tty drivers but serial-core since v3.10 and commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*") without anyone noticing. Note that serial-core still supports changing speed using TIOCSSERIAL and SPD flags (including "alt-speeds"), but also warns about it being deprecated since pre-git. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13tty: ircomm: remove dead and broken ioctl codeJohan Hovold1-106/+1
Remove three ifdefed and broken implementations of TIOCSSERIAL and TIOCGICOUNT, and parity handling in set_termios which had suffered severe bit rot. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13tty: rocket: drop broken alt-speed supportJohan Hovold1-21/+6
Setting an alt_speed using the ROCKET_SPD flags has been deprecated since v2.1.69, and has been broken since commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*") without anyone noticing. To make things worse commit 6df3526b6649 ("rocket: first pass at termios reporting") in v2.6.25 started reporting back the actual baud rate used, something which also required 38400 to again be set whenever changing a SPD flag. Drop the broken alt-speed handling altogether, and add a ratelimited warning about using TIOCCSERIAL to change speed as being deprecated. Note that the rocket driver has never supported using a custom divisor (ASYNC_SPD_CUST equivalent). Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13tty: cyclades: drop broken alt-speed supportJohan Hovold1-12/+9
Setting an alt_speed using the ASYNC_SPD flags has been deprecated since v2.1.69, and has been broken since v3.10 and commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*") without anyone noticing. Drop the broken alt-speed handling altogether, and add a ratelimited warning about using TIOCCSERIAL to to change speed as being deprecated. Note that using ASYNC_SPD_CUST is still supported. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13tty: amiserial: drop broken alt-speed supportJohan Hovold1-20/+3
Setting an alt_speed using the ASYNC_SPD flags has been deprecated since v2.1.69, and has been broken since v3.10 and commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*") without anyone noticing. Drop the broken alt-speed handling altogether, and add a ratelimited warning about using TIOCCSERIAL to change speed as being deprecated. Note that using ASYNC_SPD_CUST is still supported. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13tty: simserial: drop unused alt_speed handlingJohan Hovold1-13/+0
This driver was setting the deprecated and broken alt_speed based on port flags, but never provided a means to change the flags or to actually change the speed. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13USB: serial: ftdi_sio: remove broken alt-speed handlingJohan Hovold1-47/+9
Remove the broken alt_speed code, and warn when trying to set the line speed using TIOCSSERIAL and SPD flags. The use of SPD flags to set the line speed has been deprecated since v2.1.69 and support for alt_speed (e.g. "warp") has even been removed from TTY core in v3.10 by commit 6865ff222cca ("TTY: do not warn about setting speed via SPD_*"), effectively breaking all driver implementations of this except for serial core. Also remove the verbose and outdated comment on how to set baud rates. Note that setting a custom divisor will continue to work with the caveat that 38400 must again be selected every time the divisor is changed since v2.6.24 and commit 669a6db1037e ("USB: ftd_sio: cleanups and updates for new termios work") which started reporting back the actual baud rate used. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13USB: serial: ftdi_sio: simplify TIOCSSERIAL flag logicJohan Hovold1-8/+5
Simplify TIOCSSERIAL flag logic somewhat. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-13serial: rate limit custom-speed deprecation noticeJohan Hovold1-3/+2
Contrary to what a comment claimed, the ASYNC_SPD flags and custom divisor can be set by a non-privileged user so rate limit the deprecation notice as was intended. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09tty: add TIOCGPTPEER ioctlAleksa Sarai9-5/+76
When opening the slave end of a PTY, it is not possible for userspace to safely ensure that /dev/pts/$num is actually a slave (in cases where the mount namespace in which devpts was mounted is controlled by an untrusted process). In addition, there are several unresolvable race conditions if userspace were to attempt to detect attacks through stat(2) and other similar methods [in addition it is not clear how userspace could detect attacks involving FUSE]. Resolve this by providing an interface for userpace to safely open the "peer" end of a PTY file descriptor by using the dentry cached by devpts. Since it is not possible to have an open master PTY without having its slave exposed in /dev/pts this interface is safe. This interface currently does not provide a way to get the master pty (since it is not clear whether such an interface is safe or even useful). Cc: Christian Brauner <[email protected]> Cc: Valentin Rothberg <[email protected]> Signed-off-by: Aleksa Sarai <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09tty: add compat_ioctl callbacksAleksa Sarai2-6/+22
In order to avoid future diversions between fs/compat_ioctl.c and drivers/tty/pty.c, define .compat_ioctl callbacks for the relevant tty_operations structs. Since both pty_unix98_ioctl() and pty_bsd_ioctl() are compatible between 32-bit and 64-bit userspace no special translation is required. Signed-off-by: Aleksa Sarai <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09serial: exar: Leave MPIOs as output for Commtech adaptersJan Kiszka1-4/+11
Commtech adapters apparently need the original setting as outputs, see https://marc.info/?l=linux-gpio&m=149557425201323&w=2. Account for that. Fixes: 7dea8165f1d6 ("serial: exar: Preconfigure xr17v35x MPIOs as output") Signed-off-by: Jan Kiszka <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09tty/serial: atmel: Remove AVR32 bits from the driverAndy Shevchenko4-29/+11
AVR32 is gone. Now it's time to clean up the driver by removing leftovers that was used by AVR32 related code. Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Richard Genoud <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09vt: fix \e[2m using the wrong placeholder color on graphical consolesAdam Borowski1-1/+1
Only vgacon and sisusbcon did it right, the rest (via generic code) tried underline (usually cyan). Signed-off-by: Adam Borowski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09Merge branch 'vt_copy_cleanup' into tty-nextGreg Kroah-Hartman3-51/+19
The vt copy_from/to_user cleanups were in a separate branch for others to work off of. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09vt: drop access_ok() calls in unimap ioctlsAdam Borowski1-8/+0
Done by copy_{from,to}_user(). Signed-off-by: Adam Borowski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09vt: use memdup_user in PIO_UNIMAP ioctlAdam Borowski1-8/+3
Again, a nice linear transfer that simplifies the code. Signed-off-by: Adam Borowski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09vt: use copy_to_user instead of __put_user in GIO_UNIMAP ioctlAdam Borowski1-8/+6
A nice big linear transfer, no need to flip stac/PAN/etc every half-entry. Also, yay __put_user() after checking only read. Signed-off-by: Adam Borowski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09vt: fix unchecked __put_user() in tioclinux ioctlsAdam Borowski1-3/+3
Only read access is checked before this call. Actually, at the moment this is not an issue, as every in-tree arch does the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU to tell them apart, but this wasn't the case in the past and may happen again on some odd arch in the future. If anyone cares about 3.7 and earlier, this is a security hole (untested) on real 80386 CPUs. Signed-off-by: Adam Borowski <[email protected]> CC: [email protected] # v3.7- Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-09vt: use copy_from/to_user instead of __get/put_user for scrnmap ioctlsAdam Borowski1-24/+7
Linus wants to get rid of these functions, and these uses are especially egregious: they copy a big linear array element by element. Signed-off-by: Adam Borowski <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-05Merge 4.12-rc4 into tty-nextGreg Kroah-Hartman228-1198/+2050
We want the tty locking fix in here, so that maybe we can finally get it fixed for real... Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-04Linux 4.12-rc4Linus Torvalds1-1/+1
2017-06-04fs/ufs: Set UFS default maximum bytes per fileRichard Narron1-3/+2
This fixes a problem with reading files larger than 2GB from a UFS-2 file system: https://bugzilla.kernel.org/show_bug.cgi?id=195721 The incorrect UFS s_maxsize limit became a problem as of commit c2a9737f45e2 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") which started using s_maxbytes to avoid a page index overflow in do_generic_file_read(). That caused files to be truncated on UFS-2 file systems because the default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it. Here I simply increase the default to a common value used by other file systems. Signed-off-by: Richard Narron <[email protected]> Cc: Al Viro <[email protected]> Cc: Will B <[email protected]> Cc: Theodore Ts'o <[email protected]> Cc: <[email protected]> # v4.9 and backports of c2a9737f45e2 Signed-off-by: Linus Torvalds <[email protected]>
2017-06-04Merge tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds9-19/+40
Pull NFS client bugfixes from Trond Myklebust: "Bugfixes include: - Fix a typo in commit e092693443b ("NFS append COMMIT after synchronous COPY") that breaks copy offload - Fix the connect error propagation in xs_tcp_setup_socket() - Fix a lock leak in nfs40_walk_client_list - Verify that pNFS requests lie within the offset range of the layout segment" * tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: nfs: Mark unnecessarily extern functions as static SUNRPC: ensure correct error is reported by xs_tcp_setup_socket() NFSv4.0: Fix a lock leak in nfs40_walk_client_list pnfs: Fix the check for requests in range of layout segment xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup() pNFS/flexfiles: missing error code in ff_layout_alloc_lseg() NFS fix COMMIT after COPY
2017-06-04Merge tag 'tty-4.12-rc4' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fix from Greg KH: "Here is a single tty core fix for 4.12-rc4. It reverts a patch that a lot of people reported as causing lockdep and other warnings. Right after I reverted this in my tree, it seems like another "correct" fix might have shown up, but it's too late in the release cycle to be messing with tty core locking, so let's just revert this for now to go back how things always have been and try it again for 4.13. This has not been in linux-next as I only reverted it a few hours ago" * tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: fix port buffer locking"
2017-06-04Merge branch 'for-linus' of ↵Linus Torvalds4-17/+69
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: - a couple of regression fixes in synaptics and axp20x-pek drivers - try to ease transition from PS/2 to RMI for Synaptics touchpad users by ensuring we do not try to activate RMI mode when RMI SMBus support is not enabled, and nag users a bit to enable it - plus a couple of other changes that seemed worthwhile for this release * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL Input: synaptics - tell users to report when they should be using rmi-smbus Input: synaptics - warn the users when there is a better mode Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled Input: synaptics - clear device info before filling in Input: silead - disable interrupt during suspend
2017-06-04Merge tag 'rtc-4.12-2' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixlet from Alexandre Belloni: "A single patch, not really a fix but I don't think there is any reason to delay it. Change the mailing list address" * tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: MAINTAINERS: update RTC mailing list
2017-06-04Merge tag 'scsi-fixes' of ↵Linus Torvalds7-35/+53
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is nine fixes, seven of which are for the qedi driver (new as of 4.10) the other two are a use after free in the cxgbi drivers and a potential NULL dereference in the rdac device handler" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libcxgbi: fix skb use after free scsi: qedi: Fix endpoint NULL panic during recovery. scsi: qedi: set max_fin_rt default value scsi: qedi: Set firmware tcp msl timer value. scsi: qedi: Fix endpoint NULL panic in qedi_set_path. scsi: qedi: Set dma_boundary to 0xfff. scsi: qedi: Correctly set firmware max supported BDs. scsi: qedi: Fix bad pte call trace when iscsiuio is stopped. scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()
2017-06-04Merge tag 'for-linus' of ↵Linus Torvalds37-170/+194
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "For the most part this is just a minor -rc cycle for the rdma subsystem. Even given that this is all of the -rc patches since the merge window closed, it's still only about 25 patches: - Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes - A few upper layer protocol fixes (IPoIB, iSER, SRP) - A modest number of core fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits) RDMA/SA: Fix kernel panic in CMA request handler flow RDMA/umem: Fix missing mmap_sem in get umem ODP call RDMA/core: not to set page dirty bit if it's already set. RDMA/uverbs: Declare local function static and add brackets to sizeof RDMA/netlink: Reduce exposure of RDMA netlink functions RDMA/srp: Fix NULL deref at srp_destroy_qp() RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings RDMA/qedr: add null check before pointer dereference RDMA/mlx5: set UMR wqe fence according to HCA cap net/mlx5: Define interface bits for fencing UMR wqe RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled RDMA/qib,hfi1: Fix MR reference count leak on write with immediate RDMA/hfi1: Defer setting VL15 credits to link-up interrupt RDMA/hfi1: change PCI bar addr assignments to Linux API functions RDMA/hfi1: fix array termination by appending NULL to attr array RDMA/iw_cxgb4: fix the calculation of ipv6 header size RDMA/iw_cxgb4: calculate t4_eq_status_entries properly RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers RDMA/nes: ACK MPA Reply frame ...
2017-06-04Revert "tty: fix port buffer locking"Greg Kroah-Hartman1-2/+0
This reverts commit 925bb1ce47f429f69aad35876df7ecd8c53deb7e. It causes lots of warnings and problems so for now, let's just revert it. Reported-by: <[email protected]> Reported-by: Russell King <[email protected]> Reported-by: Sergey Senozhatsky <[email protected]> Reported-by: Geert Uytterhoeven <[email protected]> Reported-by: Jiri Slaby <[email protected]> Reported-by: Andrey Konovalov <[email protected]> Acked-by: Vegard Nossum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-03nfs: Mark unnecessarily extern functions as staticJan Kara2-4/+3
nfs_initialise_sb() and nfs_clone_super() are declared as extern even though they are used only in fs/nfs/super.c. Mark them as static. Also remove explicit 'inline' directive from nfs_initialise_sb() and leave it upto compiler to decide whether inlining is worth it. Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2017-06-03Merge tag 'hwmon-for-linus-v4.12-rc4' of ↵Linus Torvalds2-30/+36
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: "A couple of patches for the aspeed pwm fan driver" * tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1 hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT hwmon: (aspeed-pwm-tacho) Select REGMAP
2017-06-03Merge tag 'for-linus-20170602' of git://git.infradead.org/linux-mtdLinus Torvalds4-19/+54
Pull MTD fixes from Brian Norris: "NAND updates from Boris: tango fixes: - Add missing MODULE_DEVICE_TABLE() in tango_nand.c - Update the number of corrected bitflips core fixes: - Fix a long standing memory leak in nand_scan_tail() - Fix several bugs introduced by the per-vendor init/detection infrastructure (introduced in 4.12) - Add a static specifier to nand_ooblayout_lp_hamming_ops definition" * tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd: mtd: nand: make nand_ooblayout_lp_hamming_ops static mtd: nand: tango: Update ecc_stats.corrected mtd: nand: tango: Export OF device ID table as module aliases mtd: nand: samsung: warn about un-parseable ECC info mtd: nand: free vendor-specific resources in init failure paths mtd: nand: drop unneeded module.h include mtd: nand: don't leak buffers when ->scan_bbt() fails
2017-06-03hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1Stefan Schaeckeler1-26/+26
Make fan and pwm names in sysfs start with index 1 in accordance to Documentation/hwmon/sysfs-interface conventions. Current implementation starts with index 0, making tools such as sensors(1) skip the first fan. Signed-off-by: Stefan Schaeckeler <[email protected]> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <[email protected]>
2017-06-03hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimedStefan Schaeckeler1-1/+0
Call of_node_put() on a node claimed with of_node_get() or by any other means such as for_each_child_of_node(). Signed-off-by: Stefan Schaeckeler <[email protected]> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <[email protected]>
2017-06-03serial: uartps: Fix kernel doc warningsNava kishore Manne1-0/+1
This patch fixes the kernel doc warnings in the driver. Signed-off-by: Nava kishore Manne <[email protected]> Signed-off-by: Michal Simek <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-03serial: 8250_of: Add reset supportJoel Stanley2-0/+11
This adds the hooks for an optional reset controller in the 8250 device tree node. Signed-off-by: Joel Stanley <[email protected]> Reviewed-by: Philipp Zabel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.