aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-23cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()Yang Yingliang1-10/+14
If device_register() fails in cxl_register_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails. Fixes: 14baf4d9c739 ("cxl: Add guest-specific code") Signed-off-by: Yang Yingliang <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Acked-by: Frederic Barrat <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23firmware: google: fix a NULL vs IS_ERR() check in cbmem_entry_probe()Peng Wu1-2/+2
The devm_memremap() function returns error pointers on error, it doesn't return NULL. Fixes: 19d54020883c ("firmware: google: Implement cbmem in sysfs driver") Signed-off-by: Peng Wu <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Reviewed-by: Jack Rosenthal <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23char: misc: Increase the maximum number of dynamic misc devices to 1048448D Scott Phillips1-13/+28
On AmpereOne, 128 dynamic misc devices is not enough for the per-cpu coresight_tmc devices. Switch the dynamic minors allocator to an ida and add logic to allocate in the ranges [0..127] and [256..1048575], leaving [128..255] for static misc devices. Dynamic allocations start from 127 growing downwards and then increasing from 256, so device numbering for the first 128 devices remain the same as before. Signed-off-by: D Scott Phillips <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe()Yang Yingliang1-0/+1
In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will not be freed through rpi_firmware_delete(), fix this leak by calling kfree() in the error path. Fixes: 1e7c57355a3b ("firmware: raspberrypi: Keep count of all consumers") Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Joel Savitz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: ds1682: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: bh1770glc: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: apds9802als: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: apds990x: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: eeprom/idt_89hpesx: Convert to i2c's .probe_new()Uwe Kleine-König1-2/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: isl29003: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: ics932s401: Convert to i2c's .probe_new()Uwe Kleine-König1-5/+3
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: hmc6352: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: eeprom/max6875: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: isl29020: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: tsl2550: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: eeprom/eeprom: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: lis3lv02d/lis3lv02d_i2c: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: sgi-gru: fix use-after-free error in gru_set_context_option, gru_fault ↵Zheng Wang3-7/+30
and gru_handle_user_call_os In some bad situation, the gts may be freed gru_check_chiplet_assignment. The call chain can be gru_unload_context->gru_free_gru_context->gts_drop and kfree finally. However, the caller didn't know if the gts is freed or not and use it afterwards. This will trigger a Use after Free bug. Fix it by introducing a return value to see if it's in error path or not. Free the gts in caller if gru_check_chiplet_assignment check failed. Fixes: 55484c45dbec ("gru: allow users to specify gru chiplet 2") Signed-off-by: Zheng Wang <[email protected]> Acked-by: Dimitri Sivanich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: tifm: fix possible memory leak in tifm_7xx1_switch_media()ruanjinjie1-1/+1
If device_register() returns error in tifm_7xx1_switch_media(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. Never directly free @dev after calling device_register(), even if it returned an error! Always use put_device() to give up the reference initialized. Fixes: 2428a8fe2261 ("tifm: move common device management tasks from tifm_7xx1 to tifm_core") Signed-off-by: ruanjinjie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23virt: acrn: Mark the uuid field as unusedAndy Shevchenko2-6/+2
After the commits for userspace (see Link tags below) the uuid field is not being used in the ACRN code. Update kernel to reflect these changes, i.e. do the following: - adding a comment explaining that it's not used anymore - replacing the specific type by a raw buffer - updating the example code accordingly The advertised field confused users and actually never been used. So the wrong part here is that kernel puts something which userspace never used and hence this may confuse a reader of this code. Note, that there is only a single tool that had been prepared a year ago for these forthcoming changes in the kernel. Link: https://github.com/projectacrn/acrn-hypervisor/commit/da0d24326ed6 Link: https://github.com/projectacrn/acrn-hypervisor/commit/bb0327e70097 Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Rafael J. Wysocki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23speakup: Fix building as extmodSamuel Thibault2-3/+8
spk_priv_keyinfo.h should be opened from the speakup directory. When building as extmod we should thus open it from the module directory rather than the main Linux source. Signed-off-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/20221118012206.j6hq6b6nfx2jhqg6@begin Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23ocxl: fix pci device refcount leak when calling get_function_0()Yang Yingliang1-1/+19
get_function_0() calls pci_get_domain_bus_and_slot(), as comment says, it returns a pci device with refcount increment, so after using it, pci_dev_put() needs be called. Get the device reference when get_function_0() is not called, so pci_dev_put() can be called in the error path and callers unconditionally. And add comment above get_dvsec_vendor0() to tell callers to call pci_dev_put(). Fixes: 87db7579ebd5 ("ocxl: control via sysfs whether the FPGA is reloaded on a link reset") Suggested-by: Andrew Donnellan <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23misc: ocxl: fix possible name leak in ocxl_file_register_afu()Yang Yingliang1-2/+5
If device_register() returns error in ocxl_file_register_afu(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and info is freed in info_release(). Fixes: 75ca758adbaf ("ocxl: Create a clear delineation between ocxl backend & frontend") Signed-off-by: Yang Yingliang <[email protected]> Acked-by: Andrew Donnellan <[email protected]> Acked-by: Frederic Barrat <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23test_firmware: fix memory leak in test_firmware_init()Zhengchao Shao1-0/+1
When misc_register() failed in test_firmware_init(), the memory pointed by test_fw_config->name is not released. The memory leak information is as follows: unreferenced object 0xffff88810a34cb00 (size 32): comm "insmod", pid 7952, jiffies 4294948236 (age 49.060s) hex dump (first 32 bytes): 74 65 73 74 2d 66 69 72 6d 77 61 72 65 2e 62 69 test-firmware.bi 6e 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 n............... backtrace: [<ffffffff81b21fcb>] __kmalloc_node_track_caller+0x4b/0xc0 [<ffffffff81affb96>] kstrndup+0x46/0xc0 [<ffffffffa0403a49>] __test_firmware_config_init+0x29/0x380 [test_firmware] [<ffffffffa040f068>] 0xffffffffa040f068 [<ffffffff81002c41>] do_one_initcall+0x141/0x780 [<ffffffff816a72c3>] do_init_module+0x1c3/0x630 [<ffffffff816adb9e>] load_module+0x623e/0x76a0 [<ffffffff816af471>] __do_sys_finit_module+0x181/0x240 [<ffffffff89978f99>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: c92316bf8e94 ("test_firmware: add batched firmware tests") Signed-off-by: Zhengchao Shao <[email protected]> Acked-by: Luis Chamberlain <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23accessibility: speakup: phonetic spelling while arrowing letter by letterMushahid Hussain6-4/+26
This patch includes an enhancement requested frequently on the mailing list.[1][2] It adds a variable, cur_phonetic in the spk_vars, which can be set as a module parameter, as well as in /sys/speakup/cur_phonetic. This patch also documents cur_phonetic as a sysfs attribute in sysfs-driver-speakup. When cur_phonetic=1, it causes speakup to speak letters phonetically if paused on the character while arrowing through a word. When a user does not set cur_phonetic to any value, the default value for it would be 0. [1]: https://github.com/linux-speakup/speakup/issues/6 [2]: https://github.com/linux-speakup/speakup/issues/5 since V1: - removed unnecessary lines Signed-off-by: Mushahid Hussain<[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23accessibility: speakup: Specify spk_vars among module parametersMushahid Hussain1-13/+47
This is an enhancement which allows setting default variables for speakup module at the boot rather than setting the sys variables after the boot. Signed-off-by: Mushahid Hussain <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_acntsa: specifying the default driver parameters among ↵Osama Muhammad1-8/+29
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_acntsa module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_acntpc: specifying the default driver parameters among ↵Osama Muhammad1-8/+30
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_acntpc module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_txprt: specifying the default driver parameters among ↵Osama Muhammad1-8/+37
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding a default variables to the speakup_txprt module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_spkout: specifying the default driver parameters among ↵Osama Muhammad1-9/+34
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_spkout module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_ltlk: specifying the default driver parameters among ↵Osama Muhammad1-11/+42
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_ltlk module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_keypc: specifying the default driver parameters among ↵Osama Muhammad1-6/+23
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_keypc module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_dummy: specifying the default driver parameters among ↵Osama Muhammad1-11/+42
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_dummy module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_dtlk: specifying the default driver parameters among ↵Osama Muhammad1-11/+39
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_dtlk module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_dectlk: specifying the default driver parameters among ↵Osama Muhammad1-10/+35
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding a default variables to the speakup_dectlk module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_decpc: specifying the default driver parameters among ↵Osama Muhammad1-10/+38
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_decpc module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_decext: specifying the default driver parameters among ↵Osama Muhammad1-10/+34
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding a default variables to the speakup_decext module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_bns: specifying the default driver parameters among ↵Osama Muhammad1-8/+28
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_bns module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_audptr: specifying the default driver parameters among ↵Osama Muhammad1-9/+33
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding a default variables to the speakup_audptr module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_apollo: specifying the default driver parameters among ↵Osama Muhammad1-9/+37
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_apollo module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23Accessiblity: speakup_soft: specifying the default driver parameters among ↵Osama Muhammad1-16/+43
the module params This is an enhancement which allows to specify the default driver parameters among the module parameters. Adding default variables to the speakup_soft module allows to easily set that at boot, rather than setting the sys variables after boot. More details can be found here: https://github.com/linux-speakup/speakup/issues/7 Signed-off-by: Osama Muhammad <[email protected]> Reviewed-by: Samuel Thibault <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23dt-bindings: slimbus: qcom,slim-ngd: convert to DT schemaKrzysztof Kozlowski2-82/+120
Convert the Qualcomm SoC SLIMBus Non Generic Device (NGD) controller bindings to DT Schema. During conversion add iommus already present in DTS and extend the example based on SDM845. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23dt-bindings: slimbus: qcom,slim: convert to DT schemaKrzysztof Kozlowski2-36/+86
Convert the Qualcomm SoC SLIMbus controller bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23dt-bindings: slimbus: convert bus description to DT schemaKrzysztof Kozlowski4-65/+95
Convert the SLIMbus bus description bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23slimbus: qcom-ngd-ctrl: reinit the reconf completion flagKrzysztof Kozlowski1-0/+6
Reinitialize the reconf completion flag when ngd registers are not retainied or when enumeration is lost for ngd. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23slimbus: qcom-ngd-ctrl: use devm_platform_get_and_ioremap_resource()Krzysztof Kozlowski1-3/+1
Simplify the code with devm_platform_get_and_ioremap_resource(). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23slimbus: qcom-ctrl: use devm_platform_ioremap_resource_byname()Krzysztof Kozlowski1-3/+1
Simplify the code with devm_platform_ioremap_resource_byname(). Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23slimbus: qcom-ctrl: drop unneeded qcom,apq8064-slim compatibleKrzysztof Kozlowski1-1/+0
Bindings require usage of fallback "qcom,slim" compatible, so "qcom,apq8064-slim" is redundant. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23slimbus: stream: add checks for invalid unprepare/disable usageKrzysztof Kozlowski1-0/+6
slim_disable_stream() and slim_stream_unprepare() are exported, so add sanity checks preventing unmatched/invalid calls. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-11-23slimbus: qcom-ngd-ctrl: add support for 44.1 Khz frequencyKrzysztof Kozlowski1-5/+59
Add support for 44.1Khz frequency by dynamically calculating the slimbus parameters instead of statically defining them. Co-developed-by: Prudhvi Yarlagadda <[email protected]> Signed-off-by: Prudhvi Yarlagadda <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Srinivas Kandagatla <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.