aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-11-04Merge tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds5-40/+17
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
2018-11-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds7-0/+432
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-04Merge tag 'ntb-4.20' of git://github.com/jonmason/ntbLinus Torvalds6-110/+429
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
2018-11-04x86/hyper-v: Enable PIT shutdown quirkMichael Kelley1-0/+11
Hyper-V emulation of the PIT has a quirk such that the normal PIT shutdown path doesn't work, because clearing the counter register restarts the timer. Disable the counter clearing on PIT shutdown. Signed-off-by: Michael Kelley <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: vkuznets <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: KY Srinivasan <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-11-04clockevents/drivers/i8253: Add support for PIT shutdown quirkMichael Kelley2-2/+13
Add support for platforms where pit_shutdown() doesn't work because of a quirk in the PIT emulation. On these platforms setting the counter register to zero causes the PIT to start running again, negating the shutdown. Provide a global variable that controls whether the counter register is zero'ed, which platform specific code can override. Signed-off-by: Michael Kelley <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: vkuznets <[email protected]> Cc: "[email protected]" <[email protected]> Cc: "[email protected]" <[email protected]> Cc: KY Srinivasan <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-11-03sctp: define SCTP_SS_DEFAULT for Stream schedulersXin Long2-1/+2
According to rfc8260#section-4.3.2, SCTP_SS_DEFAULT is required to defined as SCTP_SS_FCFS or SCTP_SS_RR. SCTP_SS_FCFS is used for SCTP_SS_DEFAULT's value in this patch. Fixes: 5bbbbe32a431 ("sctp: introduce stream scheduler foundations") Reported-by: Jianwen Ji <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03sctp: fix strchange_flags name for Stream Change EventXin Long1-0/+2
As defined in rfc6525#section-6.1.3, SCTP_STREAM_CHANGE_DENIED and SCTP_STREAM_CHANGE_FAILED should be used instead of SCTP_ASSOC_CHANGE_DENIED and SCTP_ASSOC_CHANGE_FAILED. To keep the compatibility, fix it by adding two macros. Fixes: b444153fb5a6 ("sctp: add support for generating add stream change event notification") Reported-by: Jianwen Ji <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2-13/+26
Daniel Borkmann says: ==================== pull-request: bpf 2018-11-03 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix BPF prog kallsyms and bpf_prog_get_info_by_fd() jited address export to not use page start but actual start instead to work correctly with profiling e.g. finding hot instructions from stack traces. Also fix latter with regards to dumping address and jited len for !multi prog, from Song. 2) Fix bpf_prog_get_info_by_fd() for !root to zero info.nr_jited_func_lens instead of leaving the user provided length, from Daniel. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-11-03mlxsw: spectrum: Fix IP2ME CPU policer configurationShalom Toledo1-1/+0
The CPU policer used to police packets being trapped via a local route (IP2ME) was incorrectly configured to police based on bytes per second instead of packets per second. Change the policer to police based on packets per second and avoid packet loss under certain circumstances. Fixes: 9148e7cf73ce ("mlxsw: spectrum: Add policers for trap groups") Signed-off-by: Shalom Toledo <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03openvswitch: fix linking without CONFIG_NF_CONNTRACK_LABELSArnd Bergmann1-1/+2
When CONFIG_CC_OPTIMIZE_FOR_DEBUGGING is enabled, the compiler fails to optimize out a dead code path, which leads to a link failure: net/openvswitch/conntrack.o: In function `ovs_ct_set_labels': conntrack.c:(.text+0x2e60): undefined reference to `nf_connlabels_replace' In this configuration, we can take a shortcut, and completely remove the contrack label code. This may also help the regular optimization. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03qed: fix link config error handlingArnd Bergmann1-2/+5
gcc-8 notices that qed_mcp_get_transceiver_data() may fail to return a result to the caller: drivers/net/ethernet/qlogic/qed/qed_mcp.c: In function 'qed_mcp_trans_speed_mask': drivers/net/ethernet/qlogic/qed/qed_mcp.c:1955:2: error: 'transceiver_type' may be used uninitialized in this function [-Werror=maybe-uninitialized] When an error is returned by qed_mcp_get_transceiver_data(), we should propagate that to the caller of qed_mcp_trans_speed_mask() rather than continuing with uninitialized data. Fixes: c56a8be7e7aa ("qed: Add supported link and advertise link to display in ethtool.") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A memory (under-)allocation fix and a comment fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/topology: Fix off by one bug sched/rt: Update comment in pick_next_task_rt()
2018-11-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds47-171/+198
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
2018-11-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds102-539/+3616
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates and fixes from Ingo Molnar: "These are almost all tooling updates: 'perf top', 'perf trace' and 'perf script' fixes and updates, an UAPI header sync with the merge window versions, license marker updates, much improved Sparc support from David Miller, and a number of fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits) perf intel-pt/bts: Calculate cpumode for synthesized samples perf intel-pt: Insert callchain context into synthesized callchains perf tools: Don't clone maps from parent when synthesizing forks perf top: Start display thread earlier tools headers uapi: Update linux/if_link.h header copy tools headers uapi: Update linux/netlink.h header copy tools headers: Sync the various kvm.h header copies tools include uapi: Update linux/mmap.h copy perf trace beauty: Use the mmap flags table generated from headers perf beauty: Wire up the mmap flags table generator to the Makefile perf beauty: Add a generator for MAP_ mmap's flag constants tools include uapi: Update asound.h copy tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies tools include uapi: Update linux/fs.h copy perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc} perf cs-etm: Correct CPU mode for samples perf unwind: Take pgoff into account when reporting elf to libdwfl perf top: Do not use overwrite mode by default perf top: Allow disabling the overwrite mode perf trace: Beautify mount's first pathname arg ...
2018-11-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
2018-11-04sched/core: Take the hotplug lock in sched_init_smp()Valentin Schneider1-1/+4
When running on linux-next (8c60c36d0b8c ("Add linux-next specific files for 20181019")) + CONFIG_PROVE_LOCKING=y on a big.LITTLE system (e.g. Juno or HiKey960), we get the following report: [ 0.748225] Call trace: [ 0.750685] lockdep_assert_cpus_held+0x30/0x40 [ 0.755236] static_key_enable_cpuslocked+0x20/0xc8 [ 0.760137] build_sched_domains+0x1034/0x1108 [ 0.764601] sched_init_domains+0x68/0x90 [ 0.768628] sched_init_smp+0x30/0x80 [ 0.772309] kernel_init_freeable+0x278/0x51c [ 0.776685] kernel_init+0x10/0x108 [ 0.780190] ret_from_fork+0x10/0x18 The static_key in question is 'sched_asym_cpucapacity' introduced by commit: df054e8445a4 ("sched/topology: Add static_key for asymmetric CPU capacity optimizations") In this particular case, we enable it because smp_prepare_cpus() will end up fetching the capacity-dmips-mhz entry from the devicetree, so we already have some asymmetry detected when entering sched_init_smp(). This didn't get detected in tip/sched/core because we were missing: commit cb538267ea1e ("jump_label/lockdep: Assert we hold the hotplug lock for _cpuslocked() operations") Calls to build_sched_domains() post sched_init_smp() will hold the hotplug lock, it just so happens that this very first call is a special case. As stated by a comment in sched_init_smp(), "There's no userspace yet to cause hotplug operations" so this is a harmless warning. However, to both respect the semantics of underlying callees and make lockdep happy, take the hotplug lock in sched_init_smp(). This also satisfies the comment atop sched_init_domains() that says "Callers must hold the hotplug lock". Reported-by: Sudeep Holla <[email protected]> Tested-by: Sudeep Holla <[email protected]> Signed-off-by: Valentin Schneider <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: [email protected] Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-04x86/qspinlock: Fix compile errorPeter Zijlstra1-5/+8
With a compiler that has asm-goto but not asm-cc-output and CONFIG_PROFILE_ALL_BRANCHES=y we get a compiler error: arch/x86/include/asm/rmwcc.h:23:17: error: jump into statement expression Fix this by writing the if() as a boolean multiplication instead. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Fixes: 7aa54be29765 ("locking/qspinlock, x86: Provide liveness guarantee") Signed-off-by: Ingo Molnar <[email protected]>
2018-11-04sched/topology: Fix off by one bugPeter Zijlstra1-1/+1
With the addition of the NUMA identity level, we increased @level by one and will run off the end of the array in the distance sort loop. Fixed: 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain") Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-03Merge branch 'core/urgent' into x86/urgent, to pick up objtool fixIngo Molnar4068-73501/+261778
Signed-off-by: Ingo Molnar <[email protected]>
2018-11-03net: hns3: Fix for out-of-bounds access when setting pfc back pressureYunsheng Lin1-6/+4
The vport should be initialized to hdev->vport for each bp group, otherwise it will cause out-of-bounds access and bp setting not correct problem. [ 35.254124] BUG: KASAN: slab-out-of-bounds in hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254126] Read of size 2 at addr ffff803b6651581a by task kworker/0:1/14 [ 35.254132] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-rc7-hulk+ #85 [ 35.254133] Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - B052 (V0.52) 09/14/2018 [ 35.254141] Workqueue: events work_for_cpu_fn [ 35.254144] Call trace: [ 35.254147] dump_backtrace+0x0/0x2f0 [ 35.254149] show_stack+0x24/0x30 [ 35.254154] dump_stack+0x110/0x184 [ 35.254157] print_address_description+0x168/0x2b0 [ 35.254160] kasan_report+0x184/0x310 [ 35.254162] __asan_load2+0x7c/0xa0 [ 35.254170] hclge_pause_setup_hw+0x2a0/0x3f8 [hclge] [ 35.254177] hclge_tm_init_hw+0x794/0x9f0 [hclge] [ 35.254184] hclge_tm_schd_init+0x48/0x58 [hclge] [ 35.254191] hclge_init_ae_dev+0x778/0x1168 [hclge] [ 35.254196] hnae3_register_ae_dev+0x14c/0x298 [hnae3] [ 35.254206] hns3_probe+0x88/0xa8 [hns3] [ 35.254210] local_pci_probe+0x7c/0xf0 [ 35.254212] work_for_cpu_fn+0x34/0x50 [ 35.254214] process_one_work+0x4d4/0xa38 [ 35.254216] worker_thread+0x55c/0x8d8 [ 35.254219] kthread+0x1b0/0x1b8 [ 35.254222] ret_from_fork+0x10/0x1c [ 35.254224] The buggy address belongs to the page: [ 35.254228] page:ffff7e00ed994400 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 35.273835] flags: 0xfffff8000008000(head) [ 35.282007] raw: 0fffff8000008000 dead000000000100 dead000000000200 0000000000000000 [ 35.282010] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 35.282012] page dumped because: kasan: bad access detected [ 35.282014] Memory state around the buggy address: [ 35.282017] ffff803b66515700: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282019] ffff803b66515780: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282021] >ffff803b66515800: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282022] ^ [ 35.282024] ffff803b66515880: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282026] ffff803b66515900: fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe fe [ 35.282028] ================================================================== [ 35.282029] Disabling lock debugging due to kernel taint [ 35.282747] hclge driver initialization finished. Fixes: 67bf2541f4b9 ("net: hns3: Fixes the back pressure setting when sriov is enabled") Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge branch 'net-bql-better-deal-with-GSO'David S. Miller3-3/+25
Eric Dumazet says: ==================== net: bql: better deal with GSO While BQL bulk dequeue works well for TSO packets, it is not very efficient as soon as GSO is involved. On a GSO only workload (UDP or TCP), this patch series can save about 8 % of cpu cycles on a 40Gbit mlx4 NIC, by keeping optimal batching, and avoiding expensive doorbells, qdisc requeues and reschedules. This patch series : - Add __netdev_tx_sent_queue() so that drivers can implement efficient BQL and xmit_more support. - Implement a work around in dev_hard_start_xmit() for drivers not using __netdev_tx_sent_queue() - changes mlx4 to use __netdev_tx_sent_queue() v2: Tariq and Willem feedback addressed. added __netdev_tx_sent_queue() (Willem suggestion) ==================== Signed-off-by: David S. Miller <[email protected]>
2018-11-03net/mlx4_en: use __netdev_tx_sent_queue()Eric Dumazet1-2/+4
doorbell only depends on xmit_more and netif_tx_queue_stopped() Using __netdev_tx_sent_queue() avoids messing with BQL stop flag, and is more generic. This patch increases performance on GSO workload by keeping doorbells to the minimum required. Signed-off-by: Eric Dumazet <[email protected]> Cc: Tariq Toukan <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03net: do not abort bulk send on BQL statusEric Dumazet1-1/+1
Before calling dev_hard_start_xmit(), upper layers tried to cook optimal skb list based on BQL budget. Problem is that GSO packets can end up comsuming more than the BQL budget. Breaking the loop is not useful, since requeued packets are ahead of any packets still in the qdisc. It is also more expensive, since next TX completion will push these packets later, while skbs are not in cpu caches. It is also a behavior difference with TSO packets, that can break the BQL limit by a large amount. Note that drivers should use __netdev_tx_sent_queue() in order to have optimal xmit_more support, and avoid useless atomic operations as shown in the following patch. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03net: bql: add __netdev_tx_sent_queue()Eric Dumazet1-0/+20
When qdisc_run() tries to use BQL budget to bulk-dequeue a batch of packets, GSO can later transform this list in another list of skbs, and each skb is sent to device ndo_start_xmit(), one at a time, with skb->xmit_more being set to one but for last skb. Problem is that very often, BQL limit is hit in the middle of the packet train, forcing dev_hard_start_xmit() to stop the bulk send and requeue the end of the list. BQL role is to avoid head of line blocking, making sure a qdisc can deliver high priority packets before low priority ones. But there is no way requeued packets can be bypassed by fresh packets in the qdisc. Aborting the bulk send increases TX softirqs, and hot cache lines (after skb_segment()) are wasted. Note that for TSO packets, we never split a packet in the middle because of BQL limit being hit. Drivers should be able to update BQL counters without flipping/caring about BQL status, if the current skb has xmit_more set. Upper layers are ultimately responsible to stop sending another packet train when BQL limit is hit. Code template in a driver might look like the following : send_doorbell = __netdev_tx_sent_queue(tx_queue, nr_bytes, skb->xmit_more); Note that __netdev_tx_sent_queue() use is not mandatory, since following patch will change dev_hard_start_xmit() to not care about BQL status. But it is highly recommended so that xmit_more full benefits can be reached (less doorbells sent, and less atomic operations as well) Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03ext4: add missing brelse() update_backups()'s error pathVasily Averin1-1/+3
Fixes: ac27a0ec112a ("ext4: initial copy of files from ext3") Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] # 2.6.19
2018-11-03ext4: add missing brelse() add_new_gdb_meta_bg()'s error pathVasily Averin1-2/+1
Fixes: 01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...") Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] # 3.7
2018-11-03ext4: add missing brelse() in set_flexbg_block_bitmap()'s error pathVasily Averin1-2/+4
Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Cc: [email protected] # 3.3 Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]>
2018-11-03ext4: avoid potential extra brelse in setup_new_flex_group_blocks() Vasily Averin1-6/+2
Currently bh is set to NULL only during first iteration of for cycle, then this pointer is not cleared after end of using. Therefore rollback after errors can lead to extra brelse(bh) call, decrements bh counter and later trigger an unexpected warning in __brelse() Patch moves brelse() calls in body of cycle to exclude requirement of brelse() call in rollback. Fixes: 33afdcc5402d ("ext4: add a function which sets up group blocks ...") Signed-off-by: Vasily Averin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected] # 3.3+
2018-11-03Merge tag 'armsoc-fixes' of ↵Linus Torvalds8-22/+35
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
2018-11-03Merge tag 'arm64-upstream' of ↵Linus Torvalds3-8/+23
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: - fix W+X page (mark RO) allocated by the arm64 kprobes code - Makefile fix for .i files in out of tree modules * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kprobe: make page to RO mode when allocate it arm64: kdump: fix small typo arm64: makefile fix build of .i file in external module case
2018-11-03Merge tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+2
Pull dma-mapping fix from Christoph Hellwig: "Avoid compile warnings on non-default arm64 configs" * tag 'dma-mapping-4.20-2' of git://git.infradead.org/users/hch/dma-mapping: arm64: fix warnings without CONFIG_IOMMU_DMA
2018-11-03Merge tag 'kbuild-v4.20-2' of ↵Linus Torvalds17-78/+28
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - clean-up leftovers in Kconfig files - remove stale oldnoconfig and silentoldconfig targets - remove unneeded cc-fullversion and cc-name variables - improve merge_config script to allow overriding option prefix * tag 'kbuild-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: remove cc-name variable kbuild: replace cc-name test with CONFIG_CC_IS_CLANG merge_config.sh: Allow to define config prefix kbuild: remove unused cc-fullversion variable kconfig: remove silentoldconfig target kconfig: remove oldnoconfig target powerpc: PCI_MSI needs PCI powerpc: remove CONFIG_MCA leftovers powerpc: remove CONFIG_PCI_QSPAN scsi: aha152x: rename the PCMCIA define
2018-11-03Merge tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds12-99/+530
Pull cifs fixes and updates from Steve French: "Three small fixes (one Kerberos related, one for stable, and another fixes an oops in xfstest 377), two helpful debugging improvements, three patches for cifs directio and some minor cleanup" * tag '4.20-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix signed/unsigned mismatch on aio_read patch cifs: don't dereference smb_file_target before null check CIFS: Add direct I/O functions to file_operations CIFS: Add support for direct I/O write CIFS: Add support for direct I/O read smb3: missing defines and structs for reparse point handling smb3: allow more detailed protocol info on open files for debugging smb3: on kerberos mount if server doesn't specify auth type use krb5 smb3: add trace point for tree connection cifs: fix spelling mistake, EACCESS -> EACCES cifs: fix return value for cifs_listxattr
2018-11-03Merge branch 's390-qeth-fixes'David S. Miller5-242/+207
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-11-02 please apply one round of qeth fixes for -net. Patch 1 is rather large and removes a use-after-free hazard from many of our debug trace entries. Patch 2 is yet another fix-up for the L3 subdriver's new IP address management code. Patch 3 and 4 resolve some fallout from the recent changes wrt how/when qeth allocates its net_device. Patch 5 makes sure we don't set reserved bits when building HW commands from user-provided data. And finally, patch 6 allows ethtool to play nice with new HW. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: report 25Gbit link speedJulian Wiedmann2-2/+20
This adds the various identifiers for 25Gbit cards, and wires them up into sysfs and ethtool. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: sanitize ARP requestsJulian Wiedmann4-79/+34
The ARP_{ADD,REMOVE}_ENTRY cmd structs contain reserved fields. Introduce a common helper that doesn't raw-copy the user-provided data into the cmd, but only sets those fields that are strictly needed for the command. This also sets the correct command length for ARP_REMOVE_ENTRY. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: fix initial operstateJulian Wiedmann4-10/+25
Setting the carrier 'on' for an unregistered netdevice doesn't update its operstate. Fix this by delaying the update until the netdevice has been registered. Fixes: 91cc98f51e3d ("s390/qeth: remove duplicated carrier state tracking") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: unregister netdevice only when registeredJulian Wiedmann3-4/+11
qeth only registers its netdevice when the qeth device is first set online. Thus a device that has never been set online will trigger a WARN ("network todo 'hsi%d' but state 0") in unregister_netdev() when removed. Fix this by protecting the unregister step, just like we already protect against repeated registering of the netdevice. Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early") Reported-by: Karsten Graul <[email protected]> Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: fix HiperSockets snifferJulian Wiedmann1-3/+5
Sniffing mode for L3 HiperSockets requires that no IP addresses are registered with the HW. The preferred way to achieve this is for userspace to delete all the IPs on the interface. But qeth is expected to also tolerate a configuration where that is not the case, by skipping the IP registration when in sniffer mode. Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") reworked the IP registration logic in the L3 subdriver, this no longer works. When the qeth device is set online, qeth_l3_recover_ip() now unconditionally registers all unicast addresses from our internal IP table. While we could fix this particular problem by skipping qeth_l3_recover_ip() on a sniffer device, the more future-proof change is to skip the IP address registration at the lowest level. This way we a) catch any future code path that attempts to register an IP address without considering the sniffer scenario, and b) continue to build up our internal IP table, so that if sniffer mode is switched off later we can operate just like normal. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03s390/qeth: sanitize strings in debug messagesJulian Wiedmann4-151/+119
As Documentation/s390/s390dbf.txt states quite clearly, using any pointer in sprinf-formatted s390dbf debug entries is dangerous. The pointers are dereferenced whenever the trace file is read from. So if the referenced data has a shorter life-time than the trace file, any read operation can result in a use-after-free. So rip out all hazardous use of indirect data, and replace any usage of dev_name() and such by the Bus ID number. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-11-03Merge branch 'work.afs' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 9p fix from Al Viro: "Regression fix for net/9p handling of iov_iter; broken by braino when switching to iov_iter_is_kvec() et.al., spotted and fixed by Marc" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: iov_iter: Fix 9p virtio breakage
2018-11-03Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds16-50/+52
Pull more SCSI updates from James Bottomley: "This is a set of minor small (and safe changes) that didn't make the initial pull request plus some bug fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mvsas: Remove set but not used variable 'id' scsi: qla2xxx: Remove two arguments from qlafx00_error_entry() scsi: qla2xxx: Make sure that qlafx00_ioctl_iosb_entry() initializes 'res' scsi: qla2xxx: Remove a set-but-not-used variable scsi: qla2xxx: Make qla2x00_sysfs_write_nvram() easier to analyze scsi: qla2xxx: Declare local functions 'static' scsi: qla2xxx: Improve several kernel-doc headers scsi: qla2xxx: Modify fall-through annotations scsi: 3w-sas: 3w-9xxx: Use unsigned char for cdb scsi: mvsas: Use dma_pool_zalloc scsi: target: Don't request modules that aren't even built scsi: target: Set response length for REPORT TARGET PORT GROUPS
2018-11-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds19-124/+172
Merge more updates from Andrew Morton: - more ocfs2 work - various leftovers * emailed patches from Andrew Morton <[email protected]>: memory_hotplug: cond_resched in __remove_pages bfs: add sanity check at bfs_fill_super() kernel/sysctl.c: remove duplicated include kernel/kexec_file.c: remove some duplicated includes mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmask ocfs2: fix clusters leak in ocfs2_defrag_extent() ocfs2: dlmglue: clean up timestamp handling ocfs2: don't put and assigning null to bh allocated outside ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry ocfs2: don't use iocb when EIOCBQUEUED returns ocfs2: without quota support, avoid calling quota recovery ocfs2: remove ocfs2_is_o2cb_active() mm: thp: relax __GFP_THISNODE for MADV_HUGEPAGE mappings include/linux/notifier.h: SRCU: fix ctags mm: handle no memcg case in memcg_kmem_charge() properly
2018-11-03memory_hotplug: cond_resched in __remove_pagesMichal Hocko1-0/+1
We have received a bug report that unbinding a large pmem (>1TB) can result in a soft lockup: NMI watchdog: BUG: soft lockup - CPU#9 stuck for 23s! [ndctl:4365] [...] Supported: Yes CPU: 9 PID: 4365 Comm: ndctl Not tainted 4.12.14-94.40-default #1 SLE12-SP4 Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.01.00.0833.051120182255 05/11/2018 task: ffff9cce7d4410c0 task.stack: ffffbe9eb1bc4000 RIP: 0010:__put_page+0x62/0x80 Call Trace: devm_memremap_pages_release+0x152/0x260 release_nodes+0x18d/0x1d0 device_release_driver_internal+0x160/0x210 unbind_store+0xb3/0xe0 kernfs_fop_write+0x102/0x180 __vfs_write+0x26/0x150 vfs_write+0xad/0x1a0 SyS_write+0x42/0x90 do_syscall_64+0x74/0x150 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fd13166b3d0 It has been reported on an older (4.12) kernel but the current upstream code doesn't cond_resched in the hot remove code at all and the given range to remove might be really large. Fix the issue by calling cond_resched once per memory section. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Michal Hocko <[email protected]> Acked-by: Johannes Thumshirn <[email protected]> Cc: Dan Williams <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-11-03bfs: add sanity check at bfs_fill_super()Tetsuo Handa1-3/+6
syzbot is reporting too large memory allocation at bfs_fill_super() [1]. Since file system image is corrupted such that bfs_sb->s_start == 0, bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and printf(). [1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96 Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <[email protected]> Reported-by: syzbot <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Tigran Aivazian <[email protected]> Cc: Matthew Wilcox <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-11-03kernel/sysctl.c: remove duplicated includeMichael Schupikov1-1/+0
Remove one include of <linux/pipe_fs_i.h>. No functional changes. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Michael Schupikov <[email protected]> Reviewed-by: Richard Weinberger <[email protected]> Acked-by: Luis Chamberlain <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-11-03kernel/kexec_file.c: remove some duplicated includeszhong jiang1-2/+0
We include kexec.h and slab.h twice in kexec_file.c. It's unnecessary. hence just remove them. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: zhong jiang <[email protected]> Reviewed-by: Bhupesh Sharma <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Acked-by: Baoquan He <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-11-03mm, thp: consolidate THP gfp handling into alloc_hugepage_direct_gfpmaskMichal Hocko5-77/+40
THP allocation mode is quite complex and it depends on the defrag mode. This complexity is hidden in alloc_hugepage_direct_gfpmask from a large part currently. The NUMA special casing (namely __GFP_THISNODE) is however independent and placed in alloc_pages_vma currently. This both adds an unnecessary branch to all vma based page allocation requests and it makes the code more complex unnecessarily as well. Not to mention that e.g. shmem THP used to do the node reclaiming unconditionally regardless of the defrag mode until recently. This was not only unexpected behavior but it was also hardly a good default behavior and I strongly suspect it was just a side effect of the code sharing more than a deliberate decision which suggests that such a layering is wrong. Get rid of the thp special casing from alloc_pages_vma and move the logic to alloc_hugepage_direct_gfpmask. __GFP_THISNODE is applied to the resulting gfp mask only when the direct reclaim is not requested and when there is no explicit numa binding to preserve the current logic. Please note that there's also a slight difference wrt MPOL_BIND now. The previous code would avoid using __GFP_THISNODE if the local node was outside of policy_nodemask(). After this patch __GFP_THISNODE is avoided for all MPOL_BIND policies. So there's a difference that if local node is actually allowed by the bind policy's nodemask, previously __GFP_THISNODE would be added, but now it won't be. From the behavior POV this is still correct because the policy nodemask is used. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Michal Hocko <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Cc: Alex Williamson <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: David Rientjes <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Stefan Priebe - Profihost AG <[email protected]> Cc: Zi Yan <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-11-03ocfs2: fix clusters leak in ocfs2_defrag_extent()Larry Chen1-0/+17
ocfs2_defrag_extent() might leak allocated clusters. When the file system has insufficient space, the number of claimed clusters might be less than the caller wants. If that happens, the original code might directly commit the transaction without returning clusters. This patch is based on code in ocfs2_add_clusters_in_btree(). [[email protected]: include localalloc.h, reduce scope of data_ac] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Larry Chen <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-11-03ocfs2: dlmglue: clean up timestamp handlingArnd Bergmann1-17/+9
The handling of timestamps outside of the 1970..2038 range in the dlm glue is rather inconsistent: on 32-bit architectures, this has always wrapped around to negative timestamps in the 1902..1969 range, while on 64-bit kernels all timestamps are interpreted as positive 34 bit numbers in the 1970..2514 year range. Now that the VFS code handles 64-bit timestamps on all architectures, we can make the behavior more consistent here, and return the same result that we had on 64-bit already, making the file system y2038 safe in the process. Outside of dlmglue, it already uses 64-bit on-disk timestamps anway, so that part is fine. For consistency, I'm changing ocfs2_pack_timespec() to clamp anything outside of the supported range to the minimum and maximum values. This avoids a possible ambiguity of values before 1970 in particular, which used to be interpreted as times at the end of the 2514 range previously. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Joseph Qi <[email protected]> Cc: Changwei Ge <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.