Age | Commit message (Collapse) | Author | Files | Lines |
|
Enable GFX11 MGCG perfmon setting.
V2: set rlc to saft mode before setting.
Signed-off-by: Likun Gao <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Correct the isa version for handling KFD test.
Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <[email protected]>
Reviewed-by: Aaron Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.
Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Mukul Joshi <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Feifei Xu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
DCN314 supports PCON.
[How]
Explicitly enable it in dcn314 resources.
Signed-off-by: Roman Li <[email protected]>
Reviewed-by: Hamza Mahfooz <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro
definitions for AMD_CG_SUPPORT_BIF_LS.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Although radeon card fence and wait for gpu to finish processing current batch rings,
there is still a corner case that radeon lockup work queue may not be fully flushed,
and meanwhile the radeon_suspend_kms() function has called pci_set_power_state() to
put device in D3hot state.
Per PCI spec rev 4.0 on 5.3.1.4.1 D3hot State.
> Configuration and Message requests are the only TLPs accepted by a Function in
> the D3hot state. All other received Requests must be handled as Unsupported Requests,
> and all received Completions may optionally be handled as Unexpected Completions.
This issue will happen in following logs:
Unable to handle kernel paging request at virtual address 00008800e0008010
CPU 0 kworker/0:3(131): Oops 0
pc = [<ffffffff811bea5c>] ra = [<ffffffff81240844>] ps = 0000 Tainted: G W
pc is at si_gpu_check_soft_reset+0x3c/0x240
ra is at si_dma_is_lockup+0x34/0xd0
v0 = 0000000000000000 t0 = fff08800e0008010 t1 = 0000000000010000
t2 = 0000000000008010 t3 = fff00007e3c00000 t4 = fff00007e3c00258
t5 = 000000000000ffff t6 = 0000000000000001 t7 = fff00007ef078000
s0 = fff00007e3c016e8 s1 = fff00007e3c00000 s2 = fff00007e3c00018
s3 = fff00007e3c00000 s4 = fff00007fff59d80 s5 = 0000000000000000
s6 = fff00007ef07bd98
a0 = fff00007e3c00000 a1 = fff00007e3c016e8 a2 = 0000000000000008
a3 = 0000000000000001 a4 = 8f5c28f5c28f5c29 a5 = ffffffff810f4338
t8 = 0000000000000275 t9 = ffffffff809b66f8 t10 = ff6769c5d964b800
t11= 000000000000b886 pv = ffffffff811bea20 at = 0000000000000000
gp = ffffffff81d89690 sp = 00000000aa814126
Disabling lock debugging due to kernel taint
Trace:
[<ffffffff81240844>] si_dma_is_lockup+0x34/0xd0
[<ffffffff81119610>] radeon_fence_check_lockup+0xd0/0x290
[<ffffffff80977010>] process_one_work+0x280/0x550
[<ffffffff80977350>] worker_thread+0x70/0x7c0
[<ffffffff80977410>] worker_thread+0x130/0x7c0
[<ffffffff80982040>] kthread+0x200/0x210
[<ffffffff809772e0>] worker_thread+0x0/0x7c0
[<ffffffff80981f8c>] kthread+0x14c/0x210
[<ffffffff80911658>] ret_from_kernel_thread+0x18/0x20
[<ffffffff80981e40>] kthread+0x0/0x210
Code: ad3e0008 43f0074a ad7e0018 ad9e0020 8c3001e8 40230101
<88210000> 4821ed21
So force lockup work queue flush to fix this problem.
Acked-by: Christian König <[email protected]>
Signed-off-by: Zhenneng Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The file amdgpu_dm_plane.c missed the header amdgpu_dm_plane.h, which
resulted on the following warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1046:5:
warning: no previous prototype for 'fill_dc_scaling_info'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1222:6:
warning: no previous prototype for 'handle_cursor_update'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:152:6:
warning: no previous prototype for 'modifier_has_dcc'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1576:5:
warning: no previous prototype for 'amdgpu_dm_plane_init'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:157:10:
warning: no previous prototype for 'modifier_gfx9_swizzle_mode'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:752:5:
warning: no previous prototype for 'fill_plane_buffer_attributes'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:83:31:
warning: no previous prototype for 'amd_get_format_info'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:88:6:
warning: no previous prototype for 'fill_blending_from_plane_state'
[-Wmissing-prototypes]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:992:5:
warning: no previous prototype for 'dm_plane_helper_check_state'
[-Wmissing-prototypes]
Therefore, include the missing header on the file and turn global functions
that are not used outside of the file into static functions.
Fixes: 5d945cbcd4b1 ("drm/amd/display: Create a file dedicated to planes")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The additional call is caused by merge conflict
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: shaoyunl <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
No need to set up rb when no gfx rings.
Signed-off-by: Candice Li <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Only amdgpu_get_xgmi_hive but no amdgpu_put_xgmi_hive
which will leak the hive reference.
Signed-off-by: YiPeng Chai <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
psp_hw_fini
V1:
The amdgpu_xgmi_remove_device function will send unload command
to psp through psp ring to terminate xgmi, but psp ring has been
destroyed in psp_hw_fini.
V2:
1. Change the commit title.
2. Restore amdgpu_xgmi_remove_device to its original calling location.
Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to
psp_hw_fini.
Signed-off-by: YiPeng Chai <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable GFXOFF allow control when set the GFX power gating.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Yifan Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.0-2022-08-17:
amdgpu:
- Revert some DML stack changes
- Rounding fixes in KFD allocations
- atombios vram info table parsing fix
- DCN 3.1.4 fixes
- Clockgating fixes for various new IPs
- SMU 13.0.4 fixes
- DCN 3.1.4 FP fixes
- TMDS fixes for YCbCr420 4k modes
- DCN 3.2.x fixes
- USB 4 fixes
- SMU 13.0 fixes
- SMU driver unload memory leak fixes
- Display orientation fix
- Regression fix for generic fbdev conversion
- SDMA 6.x fixes
- SR-IOV fixes
- IH 6.x fixes
- Use after free fix in bo list handling
- Revert pipe1 support
- XGMI hive reset fix
amdkfd:
- Fix potential crach in kfd_create_indirect_link_prop()
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
One patch for imx/dcss to get rid of a warning message, one off-by-one
fix and GA103 support for nouveau, a refcounting fix for meson, a NULL
pointer dereference fix for ttm, a error check fix for lvds-codec, a
dt-binding schema fix and an underflow fix for sun4i
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20220816094401.wtadc7ddr6lzq6aj@houat
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- disable pci resize on 32-bit systems (Nirmoy)
- don't leak the ccs state (Matt)
- TLB invalidation fixes (Chris)
[now with all fixes of fixes]
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
This reverts commit 4c7631800e6bf0eced08dd7b4f793fcd972f597d.
Triggered GFX hangs with GNOME Wayland on Navi 21.
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2117
Signed-off-by: Michel Dänzer <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If amdgpu_cs_vm_handling returns r != 0, then it will unlock the
bo_list_mutex inside the function amdgpu_cs_vm_handling and again on
amdgpu_cs_parser_fini. This problem results in the following
use-after-free problem:
[ 220.280990] ------------[ cut here ]------------
[ 220.281000] refcount_t: underflow; use-after-free.
[ 220.281019] WARNING: CPU: 1 PID: 3746 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110
[ 220.281029] ------------[ cut here ]------------
[ 220.281415] CPU: 1 PID: 3746 Comm: chrome:cs0 Tainted: G W L ------- --- 5.20.0-0.rc0.20220812git7ebfc85e2cd7.10.fc38.x86_64 #1
[ 220.281421] Hardware name: System manufacturer System Product Name/ROG STRIX X570-I GAMING, BIOS 4403 04/27/2022
[ 220.281426] RIP: 0010:refcount_warn_saturate+0xba/0x110
[ 220.281431] Code: 01 01 e8 79 4a 6f 00 0f 0b e9 42 47 a5 00 80 3d de
7e be 01 00 75 85 48 c7 c7 f8 98 8e 98 c6 05 ce 7e be 01 01 e8 56 4a
6f 00 <0f> 0b e9 1f 47 a5 00 80 3d b9 7e be 01 00 0f 85 5e ff ff ff 48
c7
[ 220.281437] RSP: 0018:ffffb4b0d18d7a80 EFLAGS: 00010282
[ 220.281443] RAX: 0000000000000026 RBX: 0000000000000003 RCX: 0000000000000000
[ 220.281448] RDX: 0000000000000001 RSI: ffffffff988d06dc RDI: 00000000ffffffff
[ 220.281452] RBP: 00000000ffffffff R08: 0000000000000000 R09: ffffb4b0d18d7930
[ 220.281457] R10: 0000000000000003 R11: ffffa0672e2fffe8 R12: ffffa058ca360400
[ 220.281461] R13: ffffa05846c50a18 R14: 00000000fffffe00 R15: 0000000000000003
[ 220.281465] FS: 00007f82683e06c0(0000) GS:ffffa066e2e00000(0000) knlGS:0000000000000000
[ 220.281470] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 220.281475] CR2: 00003590005cc000 CR3: 00000001fca46000 CR4: 0000000000350ee0
[ 220.281480] Call Trace:
[ 220.281485] <TASK>
[ 220.281490] amdgpu_cs_ioctl+0x4e2/0x2070 [amdgpu]
[ 220.281806] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu]
[ 220.282028] drm_ioctl_kernel+0xa4/0x150
[ 220.282043] drm_ioctl+0x21f/0x420
[ 220.282053] ? amdgpu_cs_find_mapping+0xe0/0xe0 [amdgpu]
[ 220.282275] ? lock_release+0x14f/0x460
[ 220.282282] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 220.282290] ? _raw_spin_unlock_irqrestore+0x30/0x60
[ 220.282297] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282305] ? _raw_spin_unlock_irqrestore+0x40/0x60
[ 220.282317] amdgpu_drm_ioctl+0x4a/0x80 [amdgpu]
[ 220.282534] __x64_sys_ioctl+0x90/0xd0
[ 220.282545] do_syscall_64+0x5b/0x80
[ 220.282551] ? futex_wake+0x6c/0x150
[ 220.282568] ? lock_is_held_type+0xe8/0x140
[ 220.282580] ? do_syscall_64+0x67/0x80
[ 220.282585] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282592] ? do_syscall_64+0x67/0x80
[ 220.282597] ? do_syscall_64+0x67/0x80
[ 220.282602] ? lockdep_hardirqs_on+0x7d/0x100
[ 220.282609] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 220.282616] RIP: 0033:0x7f8282a4f8bf
[ 220.282639] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10
00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00
0f 05 <89> c2 3d 00 f0 ff ff 77 18 48 8b 44 24 18 64 48 2b 04 25 28 00
00
[ 220.282644] RSP: 002b:00007f82683df410 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[ 220.282651] RAX: ffffffffffffffda RBX: 00007f82683df588 RCX: 00007f8282a4f8bf
[ 220.282655] RDX: 00007f82683df4d0 RSI: 00000000c0186444 RDI: 0000000000000018
[ 220.282659] RBP: 00007f82683df4d0 R08: 00007f82683df5e0 R09: 00007f82683df4b0
[ 220.282663] R10: 00001d04000a0600 R11: 0000000000000246 R12: 00000000c0186444
[ 220.282667] R13: 0000000000000018 R14: 00007f82683df588 R15: 0000000000000003
[ 220.282689] </TASK>
[ 220.282693] irq event stamp: 6232311
[ 220.282697] hardirqs last enabled at (6232319): [<ffffffff9718cd7e>] __up_console_sem+0x5e/0x70
[ 220.282704] hardirqs last disabled at (6232326): [<ffffffff9718cd63>] __up_console_sem+0x43/0x70
[ 220.282709] softirqs last enabled at (6232072): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170
[ 220.282716] softirqs last disabled at (6232061): [<ffffffff970ff669>] __irq_exit_rcu+0xf9/0x170
[ 220.282722] ---[ end trace 0000000000000000 ]---
Therefore, remove the mutex_unlock from the amdgpu_cs_vm_handling
function, so that amdgpu_cs_submit and amdgpu_cs_parser_fini can handle
the unlock.
Fixes: 90af0ca047f3 ("drm/amdgpu: Protect the amdgpu_bo_list list with a mutex v2")
Reported-by: Mikhail Gavrilov <[email protected]>
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Melissa Wen <[email protected]>
Signed-off-by: Maíra Canal <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There are no backing hardware registers for ih_soft ring.
As a result, don't try to access hardware registers for read
and write pointers when processing interrupts on the IH soft
ring.
Signed-off-by: Mukul Joshi <[email protected]>
Acked-by: Christian König <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add secure display TA load for Renoir
Signed-off-by: Shane Xiao <[email protected]>
Reviewed-by: Aaron Liu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Description]
For SubVP scaling cases, we must include the scaling
info as part of the cmd. This is required when converting
OTG line to HUBP line for the MALL_START_LINE programming.
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There is no point in returning an int here. It only returns 0 which
the caller never uses. Therefore return void and remove the unnecessary
assignment.
Addresses-Coverity: 1504988 ("Unused value")
Fixes: 8da1170a16e4 ("drm/amdgpu: add VCN4 ip block support")
Reviewed-by: Ruijing Dong <[email protected]>
Suggested-by: Ruijing Dong <[email protected]>
Suggested-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Khalid Masum <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Local variable 'rq' is initialized by an address
of field of drm_sched_job, so it does not make
sense to compare 'rq' with NULL.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Reviewed-by: Andrey Grodzovsky <[email protected]>
Signed-off-by: Andrey Strachuk <[email protected]>
Fixes: 7c6e68c777f1 ("drm/amdgpu: Avoid HW GPU reset for RAS.")
Signed-off-by: Alex Deucher <[email protected]>
|
|
Was missing. Add it.
Signed-off-by: Harish Kasiviswanathan <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
Add GC_11_0_3_A0 as a chip revision to the DCN32 family
Reviewed-by: Rodrigo Siqueira <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Samson Tam <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[why]
this is to ensure that driver will not reprogram hvm_prefetch_req again if
it is done.
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Charlene Liu <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Description]
Use pitch when calculating size to cache in MALL
Reviewed-by: Samson Tam <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Description]
Don't set DSC bit for phantom pipes, not
required since phantom pipe don't have
any actual output
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Alvin Lee <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
Depending on how the clock table is constructed from PMFW we can run
into issues where we don't think we have enough bandwidth available
due to FCLK too low - eg. when the FCLK table contains invalid entries
or a single entry.
We should always pick up the maximum clocks for each state as a final
state in this case to prevent validation from failing if the table is
malformed.
We should also contain sensible defaults in the case where values
are invalid.
Redfine the clock table structures by adding a 314 prefix to make
debugging these issues easier by avoiding symbol name clashes.
Overall this policy more closely aligns to how we did things for 315,
but because of how the voltage rail is setup we should favor keeping
DCFCLK low rather than DISPCLK or DPPCLK - so use the max for those
in every entry.
Reviewed-by: Daniel Miess <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Nicholas Kazlauskas <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Recent backport from opensource broke the Nightly tool build
that tests DC and DML for bugs and regressions. This was
because the backport had a header inclusion that was not
consistent with the AMD style of including headers was allowed
to be merged back in DML code that caused tool compilation
failures.
[How]
Modify the way in which the header file in included so that it
is consistent with AMD style of including headers. This then
automatically fixes the tool compilation process and also
helps maintain the code quality and consistency.
Reviewed-by: Alvin Lee <[email protected]>
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Chaitanya Dhere <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
MPO video
[Why]
Pipes for MPO primary and overlay will be power down and power up during
plug/unplug external monitor while MPO video playback.
But the pipes were the same after plug/unplug and should not need to be
power down and power up or it will make page flip interrupt disabled and
cause hang issue.
[How]
Add pipe split change condition that not only check the top pipe pointer
but also check the index of top pipe if both top pipes are available.
Reviewed-by: Sun peng Li <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Tom Chung <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Need a way to retain default clock table to aid
the investigation into why 8k@30 display not
lighting up on dcn314
[How]
Use flag to prevent execution of bw_params helper
function and function for updating bw_bounding_box
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Reviewed-by: Jun Lei <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Daniel Miess <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
During multi-vf executing benchmark (Luxmark) observed kiq error timeout.
It happenes because all of VFs do the tlb invalidation at the same time.
Although each VF has the invalidate register set, from hardware side
the invalidate requests are queue to execute.
[How]
In case of 12 VF increase timeout on 12*100ms
Signed-off-by: Dusica Milinkovic <[email protected]>
Acked-by: Shaoyun Liu <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why & How]
Increase width of some variables to avoid comparing integers of
different widths.
Reviewed-by: Alvin Lee <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Josip Pavic <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Reviewed-by: Anthony Koo <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Ian Chen <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
[Why]
Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned
between different HDMI lanes when using YCbCr420 10-bit pixel format.
BIOS functions for transmitter/encoder control take pixel clock in kHz
increments, whereas the function for setting the pixel clock is in 100Hz
increments. Setting pixel clock to a value that is not on a kHz boundary
will cause the issue.
[How]
Round pixel clock down to nearest kHz in 10/12-bpc cases.
Reviewed-by: Aric Cyr <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Ilya Bakoulin <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This version brings along following fixes:
-Fix edp panel missing event
-Set ARGB16161616 pixel format to 26
-Fix dcn32 interger issue
-Clear optc underflow bit after ODM clock off
-Fix issue with stereo3D
-Fix DML2 lightup issue
-Correct DTBCLK for dcn314
-Revert for a regression
-Fix clocks and bugs in DML2
-Enable SubVP by defalut on DCN32 & DCN321
-Corret boundary condition for engin ID on DCN303
-Fix FRL encoder override registry key
-Fix VPG for dcn314 HPO
-Fix Linux compile-time warning
-Add new prefetch modes in DML for DCN32
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Aric Cyr <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
pixel format addition
[WHY]
Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green
point failures in HDR10 DTN tests. The re-implementation of ARGB16161616
was to fix this however it did not actually fix this issue but a side effect of the
issue.
[HOW]
Change ARGB16161616 pixel format to 26.
Reviewed-by: Martin Leung <[email protected]>
Acked-by: Brian Chang <[email protected]>
Signed-off-by: Ethan Wellenreiter <[email protected]>
Tested-by: Daniel Wheeler <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The driver needs to set EnableGfxImu message parameter to tell the PMFW
to set the flag that enables the GFXOFF feature.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable AMD_CG_SUPPORT_IH_CG support.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
This code has two bugs. If kfd_topology_device_by_proximity_domain()
failed on the first iteration through the loop then "cpu_link" is
uninitialized and should not be dereferenced.
The second bug is that we cannot dereference a list iterator when it
points to the list head. In other words, if we exit the
list_for_each_entry() loop exits without hitting a break then "cpu_link"
is not a valid pointer and should not be dereferenced.
Fix both of these problems by setting "cpu_link" to NULL when it is invalid
and non-NULL when it is valid. That makes it easier to test for
valid vs invalid.
Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There is only one engine in sdma 6.0.1, the total number of
reserved queues should be 2, reflect this number in bitmap as well.
Signed-off-by: Yifan Zhang <[email protected]>
Reviewed-by: Tim Huang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable AMD_CG_SUPPORT_ATHUB_MGCG and AMD_CG_SUPPORT_ATHUB_LS support.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable AMD_CG_SUPPORT_HDP_MGCG and AMD_CG_SUPPORT_HDP_LS support.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable AMD_CG_SUPPORT_MC_MGCG and AMD_CG_SUPPORT_MC_LS support.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating.
The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1,
so need to add IP version checking to use the right REG offset.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Add set/get_clockgating for HDP IP v5.2.1.
Signed-off-by: Tim Huang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|