| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
CONFIG_64BIT is not sufficient for checking for availability of
iowrite64() and friends.
Also, the out_addr helpers need to be inline.
Fixes: b690f8df6497 ("net: axienet: Use iowrite64 to write all 64b descriptor pointers")
Signed-off-by: David S. Miller <[email protected]>
|
|
Andy Chiu says:
====================
net: axienet: fix DMA Tx error
We ran into multiple DMA TX errors while writing files over a network
block device running on top of a DMA-connected AXI Ethernet device on
64-bit RISC-V machines. The errors indicated that the DMA had fetched a
null descriptor and we found that the reason for this is that AXI DMA had
unexpectedly processed a partially updated tail descriptor pointer. To
fix it, we suggest that the driver should use one 64-bit write instead
of two 32-bit writes to perform such update if possible. For those
archectures where double-word load/stores are unavailable, e.g. 32-bit
archectures, force a driver probe failure if the driver finds 64-bit
capability on DMA.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
According to commit f735c40ed93c ("net: axienet: Autodetect 64-bit DMA
capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only
writing MSB part of tail descriptor pointer causes DMA engine to start
fetching descriptors. However, we found that it is true only if dma is in
idle state. In other words, dma would use a tailp even if it only has LSB
updated, when the dma is running.
The non-atomicity of this behavior could be problematic if enough
delay were introduced in between the 2 writes. For example, if an
interrupt comes right after the LSB write and the cpu spends long
enough time in the handler for the dma to get back into idle state by
completing descriptors, then the seconcd write to MSB would treat dma
to start fetching descriptors again. Since the descriptor next to the
one pointed by current tail pointer is not filled by the kernel yet,
fetching a null descriptor here causes a dma internal error and halt
the dma engine down.
We suggest that the dma engine should start process a 64-bit MMIO write
to the descriptor pointer only if ONE 32-bit part of it is written on all
states. Or we should restrict the use of 64-bit addressable dma on 32-bit
platforms, since those devices have no instruction to guarantee the write
to LSB and MSB part of tail pointer occurs atomically to the dma.
initial condition:
curp = x-3;
tailp = x-2;
LSB = x;
MSB = 0;
cpu: |dma:
iowrite32(LSB, tailp) | completes #(x-3) desc, curp = x-3
... | tailp updated
=> irq | completes #(x-2) desc, curp = x-2
... | completes #(x-1) desc, curp = x-1
... | ...
... | completes #x desc, curp = tailp = x
<= irqreturn | reaches tailp == curp = x, idle
iowrite32(MSB, tailp + 4) | ...
| tailp updated, starts fetching...
| fetches #(x + 1) desc, sees cntrl = 0
| post Tx error, halt
Signed-off-by: Andy Chiu <[email protected]>
Reported-by: Max Hsu <[email protected]>
Reviewed-by: Greentime Hu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently it is not safe to config the IP as 64-bit addressable on 32-bit
archectures, which cannot perform a double-word store on its descriptor
pointers. The pointer is 64-bit wide if the IP is configured as 64-bit,
and the device would process the partially updated pointer on some
states if the pointer was updated via two store-words. To prevent such
condition, we force a probe fail if we discover that the IP has 64-bit
capability but it is not running on a 64-Bit kernel.
This is a series of patch (1/2). The next patch must be applied in order
to make 64b DMA safe on 64b archectures.
Signed-off-by: Andy Chiu <[email protected]>
Reported-by: Max Hsu <[email protected]>
Reviewed-by: Greentime Hu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
initialization
Currently in driver initialization process, driver will set shapping
parameters of tm port to default speed read from firmware. However, the
speed of SFP module may not be default speed, so shapping parameters of
tm port may be incorrect.
To fix this problem, driver sets new shapping parameters for tm port
after getting exact speed of SFP module in this case.
Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type")
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently hns3 driver misuses the VF rss size to initialize the PF rss size
in hclge_tm_vport_tc_info_update. So this patch fix it by checking the
vport id before initialization.
Fixes: 7347255ea389 ("net: hns3: refactor PF rss get APIs with new common rss get APIs")
Signed-off-by: Jie Wang <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, settings parameters of schedule mode, dwrr, shaper of tm
priority or qset of one tc are only be set when tc is enabled, they are
not restored to the default settings when tc is disabled. It confuses
users when they cat tm_priority or tm_qset files of debugfs. So this
patch fixes it.
Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver")
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently tx push is also a ring param. So the original ring param print
info in hns3_is_ringparam_changed should be adjusted.
Fixes: 07fdc163ac88 ("net: hns3: refactor hns3_set_ringparam()")
Signed-off-by: Jie Wang <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It's unnecessary to push link state to unalive VF, and the VF will
query link state from PF when it being start works.
Fixes: 18b6e31f8bf4 ("net: hns3: PF add support for pushing link status to VFs")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When modify port base vlan, the port base vlan tbl_sta needs to set to
false before removing old vlan, to indicate this operation is not finish.
Fixes: c0f46de30c96 ("net: hns3: fix port base vlan add fail when concurrent with reset")
Signed-off-by: Guangbin Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Xin Long says:
====================
Documentation: add description for a couple of sctp sysctl options
These are a couple of sysctl options I recently added, but missed adding
documents for them. Especially for net.sctp.intl_enable, it's hard for
users to setup stream interleaving, as it also needs to call some socket
options.
This patchset is to add documents for them.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: 2f5268a9249b ("sctp: allow users to set netns ecn flag with sysctl")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Describe it in networking/ip-sysctl.rst like other SCTP options.
We need to document this especially as when using the feature
of User Message Interleaving, some socket options also needs
to be set.
Fixes: 463118c34a35 ("sctp: support sysctl to allow users to use stream interleave")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Describe it in networking/ip-sysctl.rst like other SCTP options.
Fixes: c0d8bab6ae51 ("sctp: add get and set sockopt for reconf_enable")
Signed-off-by: Xin Long <[email protected]>
Acked-by: Marcelo Ricardo Leitner <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-06-09
Grzegorz prevents addition of TC flower filters to TC0 and fixes queue
iteration for VF ADQ to number of actual queues for i40e.
Aleksandr prevents running of ethtool tests when device is being reset
for i40e.
Michal resolves an issue where iavf does not report its MAC address
properly.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix issue with MAC address of VF shown as zero
i40e: Fix call trace in setup_tx_descriptors
i40e: Fix calculating the number of queue pairs
i40e: Fix adding ADQ filter to TC0
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree fixes from Rob Herring:
- More DT meta-schema check fixes from new bindings in merge window
- Fix stale DT binding references from Mauro
- Update various binding maintainers
- Fix in arm,malidp properties to match reality
- Add deprecated 'atheros' vendor prefix
* tag 'devicetree-fixes-for-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: display: arm,malidp: remove bogus RQOS property
dt-bindings: pinctrl: ralink: Fix 'enum' lists with duplicate entries
dt-bindings: Drop more redundant 'maxItems/minItems' in if/then schemas
dt-bindings: nvme: apple,nvme-ans: Drop 'maxItems' from 'apple,sart'
MAINTAINERS: rectify entries for ARM DRM DRIVERS after dt conversion
MAINTAINERS: update snps,axs10x-reset.yaml reference
MAINTAINERS: update dongwoon,dw9807-vcm.yaml reference
MAINTAINERS: update cortina,gemini-ethernet.yaml reference
dt-bindings: mfd: rk808: update rockchip,rk808.yaml reference
dt-bindings: reset: update st,stih407-powerdown.yaml references
dt-bindings: arm: update vexpress-config.yaml references
dt-bindings: interrupt-controller: update brcm,l2-intc.yaml reference
dt-bindings: mfd: bd9571mwv: update rohm,bd9571mwv.yaml reference
dt-bindings: update Luca Ceresoli's e-mail address
dt-bindings: msm: update maintainers list with proper id
dt-bindings: vendor-prefixes: document deprecated Atheros
dt-bindings: Update QCOM USB subsystem maintainer information
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix an intel_idle issue introduced during the 5.16 development
cycle and two recent regressions in the system reboot/poweroff code.
Specifics:
- Fix CPUIDLE_FLAG_IRQ_ENABLE handling in intel_idle (Peter Zijlstra)
- Allow all platforms to use the global poweroff handler and make
non-syscall poweroff code paths work again (Dmitry Osipenko)"
* tag 'pm-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle,intel_idle: Fix CPUIDLE_FLAG_IRQ_ENABLE
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
|
|
There's a rule in certs/Makefile for which the command begins with eight
spaces. This results in:
../certs/Makefile:21: FORCE prerequisite is missing
../certs/Makefile:21: *** missing separator. Stop.
Fix this by turning the spaces into a tab.
Fixes: addf466389d9 ("certs: Check that builtin blacklist hashes are valid")
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jarkko Sakkinen <[email protected]>
Reviewed-by: Mickaël Salaün <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ # v1
Signed-off-by: Linus Torvalds <[email protected]>
|
|
As Liviu pointed out, the arm,malidp-arqos-high-level property
mentioned in the original .txt binding was a mistake, and
arm,malidp-arqos-value needs to take its place.
The binding commit ce6eb0253cba ("dt/bindings: display: Add optional
property node define for Mali DP500") mentions the right name in the
commit message, but has the wrong name in the diff.
Commit d298e6a27a81 ("drm/arm/mali-dp: Add display QoS interface
configuration for Mali DP500") uses the property in the driver, but uses
the shorter name.
Remove the wrong property from the binding, and use the proper name in
the example. The actual property was already documented properly.
Fixes: 2c8b082a3ab1 ("dt-bindings: display: convert Arm Mali-DP to DT schema")
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/
Signed-off-by: Andre Przywara <[email protected]>
Reported-by: Liviu Dudau <[email protected]>
Reviewed-by: Liviu Dudau <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Merge fixes for regressions introduced by the recent rework of the
system reboot/poweroff code.
* pm-sysoff:
kernel/reboot: Fix powering off using a non-syscall code paths
kernel/reboot: Use static handler for register_platform_power_off()
|
|
There's no reason to list the same value twice in an 'enum'. This was fixed
treewide in commit c3b006819426 ("dt-bindings: Fix 'enum' lists with
duplicate entries"), but this one got added in the merge window.
A meta-schema change will catch future cases.
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Sergio Paracuellos <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Pull documentation fixes from Jonathan Corbet:
"A few documentation fixes for 5.19, including moving the new HTE docs
to a more suitable location, adding loongarch to the features lists,
and a couple of typo fixes"
* tag 'docs-5.19-3' of git://git.lwn.net/linux:
docs: arm: tcm: Fix typo in description of TCM and MMU usage
docs: Move the HTE documentation to driver-api/
docs: usb: fix literal block marker in usbmon verification example
Documentation/features: Update the arch support status files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- SME save/restore for EFI fix - incorrect logic for detecting the need
for saving/restoring the FFR state.
- SME fix for a CPU ID field value.
- Sysreg generation awk script fix (comparison operator).
- Some typos in documentation or comments and silence a sparse warning
(missing prototype).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Add kasan_hw_tags_enable() prototype to silence sparse
arm64/sme: Fix EFI save/restore
arm64/fpsimd: Fix typo in comment
arm64/sysreg: Fix typo in Enum element regex
arm64/sme: Fix SVE/SME typo in ABI documentation
arm64/sme: Fix tests for 0b1111 value ID registers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs fixes from Damien Le Moal:
- Fix handling of the explicit-open mount option, and in particular the
conditions under which this option can be ignored.
- Fix a problem with zonefs iomap_begin method, causing a hang in
iomap_readahead() when a readahead request reaches the end of a file.
* tag 'zonefs-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: fix zonefs_iomap_begin() for reads
zonefs: Do not ignore explicit_open with active zone limit
zonefs: fix handling of explicit_open option on mount
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Several small fixes for rc2:
- Remove unused field in struct ata_port (Hannes)
- Fix a potential (very unlikely) NULL pointer dereference in
ata_host_alloc_pinfo() (Sergey)
- Fix a device reference leak in the pata_octeon_cf driver (Miaoqian)
- Fixes for handling access to the concurrent positioning ranges log
page used with multi-actuator HDDs (Tyler)
- Fix the values shown by the pio_mode and dma_mode sysfs device
attributes (Sergey)
- Update the MAINTAINERS file to add libata sysfs ABI documentation
file (Sergey)"
* tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
MAINTAINERS: add ATA sysfs file documentation to libata entry
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
libata: fix translation of concurrent positioning ranges
libata: fix reading concurrent positioning ranges log
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
ata: libata: drop 'sas_last_tag'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of fixes; almost all changes are device-specific small
fixes over ASoC, HD-audio and USB-audio. No sign of serious breakage,
so far"
* tag 'sound-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Add quirk for HP Dev One
ALSA: hda/realtek - Add HW8326 support
ALSA: hda/conexant - Fix loopback issue with CX20632
ALSA: hda: MTL: add HD Audio PCI ID and HDMI codec vendor ID
ALSA: usb-audio: Set up (implicit) sync for Saffire 6
ALSA: usb-audio: Skip generic sync EP parse for secondary EP
ASoC: wm_adsp: Fix event generation for wm_adsp_fw_put()
ASoC: es8328: Fix event generation for deemphasis control
ASoC: wm8962: Fix suspend while playing music
ASoC: SOF: ipc-msg-injector: Fix reversed if statement
ASoC: SOF: ipc-msg-injector: Propagate write errors correctly
ASoC: fsl_sai: Add support for i.MX8MN
ASoC: SOF: Fix potential NULL pointer dereference
ALSA: hda/realtek: Fix for quirk to enable speaker output on the Lenovo Yoga DuetITL 2021
ASoC: cs42l51: Correct minimum value for SX volume control
ASoC: cs42l56: Correct typo in minimum level for SX volume controls
ASoC: cs42l52: Correct TLV for Bypass Volume
ASoC: cs53l30: Correct number of volume levels on SX controls
ASoC: cs35l36: Update digital volume TLV
ASoC: cs42l52: Fix TLV scales for mixer controls
...
|
|
Pull drm fixes from Dave Airlie:
"Not a huge amount here, mainly a bunch of scattered amdgpu fixes, and
then some misc panfrost, bridge/panel ones, and one ast fix for
multi-monitors. Probably pick up a bit more next week like rc3 often
does.
amdgpu:
- DCN 3.1 golden settings fix
- eDP fixes
- DMCUB fixes
- GFX11 fixes and cleanups
- VCN fix for yellow carp
- GMC11 fixes
- RAS fixes
- GPUVM TLB flush fixes
- SMU13 fixes
- VCN3 AV1 regression fix
- VCN2 JPEG fix
- Other misc fixes
amdkfd:
- MMU notifier fix
- Support for more GC 10.3.x families
- Pinned BO handling fix
- Partial migration bug fix
panfrost:
- fix a use after free
ti-sn65dsi83:
- fix invalid DT configuration
panel:
- two self refresh fixes
ast:
- multiple output fix"
* tag 'drm-fixes-2022-06-10' of git://anongit.freedesktop.org/drm/drm: (37 commits)
drm/ast: Support multiple outputs
drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.
drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit
drm/amdgpu: always flush the TLB on gfx8
drm/amdgpu: fix limiting AV1 to the first instance on VCN3
drm/amdkfd:Fix fw version for 10.3.6
drm/amdgpu: Add MODE register to wave debug info in gfx11
Revert "drm/amd/display: Pass the new context into disable OTG WA"
Revert "drm/amdgpu: Ensure the DMA engine is deactivated during set ups"
drm/atomic: Force bridge self-refresh-exit on CRTC switch
drm/bridge: analogix_dp: Support PSR-exit to disable transition
drm/amdgpu: suppress the compile warning about 64 bit type
drm/amd/pm: suppress compile warnings about possible unaligned accesses
drm/amdkfd: Fix partial migration bugs
drm/amdkfd: add pinned BOs to kfd_bo_list
drm/amdgpu: Update PDEs flush TLB if PTB/PDB moved
drm/amdgpu: enable tmz by default for GC 10.3.7
drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions
drm/amdkfd: Use mmget_not_zero in MMU notifier
drm/amdgpu: Resolve RAS GFX error count issue after cold boot on Arcturus
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Quick follow up, to cleanly fast-forward net again.
Current release - new code bugs:
- Revert "net/mlx5e: Allow relaxed ordering over VFs"
Previous releases - regressions:
- seg6: fix seg6_lookup_any_nexthop() to handle VRFs using
flowi_l3mdev
Misc:
- rename TLS_INFO_ZC_SENDFILE to better express the meaning"
* tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev
nfp: flower: restructure flow-key for gre+vlan combination
nfp: avoid unnecessary check warnings in nfp_app_get_vf_config
tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
|
|
This function is only called from assembly, no need for a prototype
declaration in a header file. In addition, add #ifdef around the
function since it is only used when CONFIG_KASAN_HW_TAGS.
Signed-off-by: Catalin Marinas <[email protected]>
Reported-by: kernel test robot <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a small cleanup removing "export" of an __init function
- a small series adding a new infrastructure for platform flags
- a series adding generic virtio support for Xen guests (frontend side)
* tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices
xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices
xen/grant-dma-iommu: Introduce stub IOMMU driver
dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops
xen/virtio: Enable restricted memory access using Xen grant mappings
xen/grant-dma-ops: Add option to restrict memory access under Xen
xen/grants: support allocating consecutive grants
arm/xen: Introduce xen_setup_dma_ops()
virtio: replace arch_has_restricted_virtio_memory_access()
kernel: add platform_has() infrastructure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Build fix for Loongson-3"
* tag 'mips-fixes_5.19_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson-3: fix compile mips cpu_hwmon as module build error.
|
|
The EFI save/restore code is confused. When saving the check for saving
FFR is inverted due to confusion with the streaming mode check, and when
restoring we check if we need to restore FFR by checking the percpu
efi_sm_state without the required wrapper rather than based on the
combination of FA64 support and streaming mode.
Fixes: e0838f6373e5 ("arm64/sme: Save and restore streaming mode over EFI runtime calls")
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Delete the redundant word 'in'.
Signed-off-by: Xiang wangx <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
In the awk script, there was a typo with the comparison operator when
checking if the matched pattern is inside an Enum block.
This prevented the generation of the whole sysreg-defs.h header.
Fixes: 66847e0618d7 ("arm64: Add sysreg header generation scripting")
Signed-off-by: Alejandro Tafalla <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2022-06-08
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif
reset for port devices") adds a new entry (flowi_l3mdev) in the common
flow struct used for indicating the l3mdev index for later rule and
table matching.
The l3mdev_update_flow() has been adapted to properly set the
flowi_l3mdev based on the flowi_oif/flowi_iif. In fact, when a valid
flowi_iif is supplied to the l3mdev_update_flow(), this function can
update the flowi_l3mdev entry only if it has not yet been set (i.e., the
flowi_l3mdev entry is equal to 0).
The SRv6 End.DT6 behavior in VRF mode leverages a VRF device in order to
force the routing lookup into the associated routing table. This routing
operation is performed by seg6_lookup_any_nextop() preparing a flowi6
data structure used by ip6_route_input_lookup() which, in turn,
(indirectly) invokes l3mdev_update_flow().
However, seg6_lookup_any_nexthop() does not initialize the new
flowi_l3mdev entry which is filled with random garbage data. This
prevents l3mdev_update_flow() from properly updating the flowi_l3mdev
with the VRF index, and thus SRv6 End.DT6 (VRF mode)/DT46 behaviors are
broken.
This patch correctly initializes the flowi6 instance allocated and used
by seg6_lookup_any_nexhtop(). Specifically, the entire flowi6 instance
is wiped out: in case new entries are added to flowi/flowi6 (as happened
with the flowi_l3mdev entry), we should no longer have incorrectly
initialized values. As a result of this operation, the value of
flowi_l3mdev is also set to 0.
The proposed fix can be tested easily. Starting from the commit
referenced in the Fixes, selftests [1],[2] indicate that the SRv6
End.DT6 (VRF mode)/DT46 behaviors no longer work correctly. By applying
this patch, those behaviors are back to work properly again.
[1] - tools/testing/selftests/net/srv6_end_dt46_l3vpn_test.sh
[2] - tools/testing/selftests/net/srv6_end_dt6_l3vpn_test.sh
Fixes: 40867d74c374 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: Anton Makarov <[email protected]>
Signed-off-by: Andrea Mayer <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Simon Horman says:
====================
nfp: fixes for v5.19
this short series includes two fixes for the NFP driver.
1. Restructure GRE+VLAN flower offload to address a miss match
between the NIC firmware and driver implementation which
prevented these features from working in combination.
2. Prevent unnecessary warnings regarding rate limiting support.-
It is expected that this feature to not _always_ be present
but this was not taken into account when the code to check
for this feature was added.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Swap around the GRE and VLAN parts in the flow-key offloaded by
the driver to fit in with other tunnel types and the firmware.
Without this change used cases with GRE+VLAN on the outer header
does not get offloaded as the flow-key mismatches what the
firmware expect.
Fixes: 0d630f58989a ("nfp: flower: add support to offload QinQ match")
Fixes: 5a2b93041646 ("nfp: flower-ct: compile match sections of flow_payload")
Signed-off-by: Etienne van der Linde <[email protected]>
Signed-off-by: Louis Peens <[email protected]>
Signed-off-by: Yinjun Zhang <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
nfp_net_sriov_check is added in nfp_app_get_vf_config which intends
to ensure ivi->vlan_proto and ivi->max_tx_rate/min_tx_rate can be
read from VF config table only when firmware supports corresponding
capability.
However, "nfp_app_get_vf_config" can be called by commands like
"ip a", "ip link set $DEV up" and "ip link set $DEV vf $NUM vlan
$param" (with VF). When using commands above, many warnings
"ndo_set_vf_<cap_x> not supported" would appear if firmware doesn't
support VF rate limit and 802.1ad VLAN assingment. If more VFs are
created, things could get worse.
Thus, this patch add an extra bool parameter for nfp_net_sriov_check
to enable/disable the cap check warning report. Unnecessary warnings
in nfp_app_get_vf_config can be avoided. Valid warnings in kinds of
vf setting function can be reserved.
Fixes: e0d0e1fdf1ed ("nfp: VF rate limit support")
Fixes: 59359597b010 ("nfp: support 802.1ad VLAN assingment to VF")
Signed-off-by: Fei Qin <[email protected]>
Signed-off-by: Yinjun Zhang <[email protected]>
Signed-off-by: Louis Peens <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
To embrace possible future optimizations of TLS, rename zerocopy
sendfile definitions to more generic ones:
* setsockopt: TLS_TX_ZEROCOPY_SENDFILE- > TLS_TX_ZEROCOPY_RO
* sock_diag: TLS_INFO_ZC_SENDFILE -> TLS_INFO_ZC_RO_TX
RO stands for readonly and emphasizes that the application shouldn't
modify the data being transmitted with zerocopy to avoid potential
disconnection.
Fixes: c1318b39c7d3 ("tls: Add opt-in zerocopy mode of sendfile()")
Signed-off-by: Maxim Mikityanskiy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
two fixes for panel self-refresh handling, and one to fix
multiple output support on AST.
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20220609100754.kvrkjy67gqabjuee@houat
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A use-after-free fix for panfrost, and a DT invalid configuration fix for
ti-sn65dsi83
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20220526090532.nvhlmwev5qgln3nb@houat
|
|
While randstruct was satisfied with using an open-coded "void *" offset
cast for the netfs_i_context <-> inode casting, __builtin_object_size() as
used by FORTIFY_SOURCE was not as easily fooled. This was causing the
following complaint[1] from gcc v12:
In file included from include/linux/string.h:253,
from include/linux/ceph/ceph_debug.h:7,
from fs/ceph/inode.c:2:
In function 'fortify_memset_chk',
inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2,
inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2:
include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
242 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by embedding a struct inode into struct netfs_i_context (which
should perhaps be renamed to struct netfs_inode). The struct inode
vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode
structs and vfs_inode is then simply changed to "netfs.inode" in those
filesystems.
Further, rename netfs_i_context to netfs_inode, get rid of the
netfs_inode() function that converted a netfs_i_context pointer to an
inode pointer (that can now be done with &ctx->inode) and rename the
netfs_i_context() function to netfs_inode() (which is now a wrapper
around container_of()).
Most of the changes were done with:
perl -p -i -e 's/vfs_inode/netfs.inode/'g \
`git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]`
Kees suggested doing it with a pair structure[2] and a special
declarator to insert that into the network filesystem's inode
wrapper[3], but I think it's cleaner to embed it - and then it doesn't
matter if struct randomisation reorders things.
Dave Chinner suggested using a filesystem-specific VFS_I() function in
each filesystem to convert that filesystem's own inode wrapper struct
into the VFS inode struct[4].
Version #2:
- Fix a couple of missed name changes due to a disabled cifs option.
- Rename nfs_i_context to nfs_inode
- Use "netfs" instead of "nic" as the member name in per-fs inode wrapper
structs.
[ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily
disable '-Wattribute-warning' for now") that is no longer needed ]
Fixes: bc899ee1c898 ("netfs: Add a netfs inode context")
Reported-by: Jeff Layton <[email protected]>
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
cc: Jonathan Corbet <[email protected]>
cc: Eric Van Hensbergen <[email protected]>
cc: Latchesar Ionkov <[email protected]>
cc: Dominique Martinet <[email protected]>
cc: Christian Schoenebeck <[email protected]>
cc: Marc Dionne <[email protected]>
cc: Ilya Dryomov <[email protected]>
cc: Steve French <[email protected]>
cc: William Kucharski <[email protected]>
cc: "Matthew Wilcox (Oracle)" <[email protected]>
cc: Dave Chinner <[email protected]>
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]/ [2]
Link: https://lore.kernel.org/r/[email protected]/ [3]
Link: https://lore.kernel.org/r/[email protected]/ [4]
Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2
Signed-off-by: Linus Torvalds <[email protected]>
|
|
set cpu_hwmon as a module build with loongson_sysconf, loongson_chiptemp
undefined error,fix cpu_hwmon compile options to be bool.Some kernel
compilation error information is as follows:
Checking missing-syscalls for N32
CALL scripts/checksyscalls.sh
Checking missing-syscalls for O32
CALL scripts/checksyscalls.sh
CALL scripts/checksyscalls.sh
CHK include/generated/compile.h
CC [M] drivers/platform/mips/cpu_hwmon.o
Building modules, stage 2.
MODPOST 200 modules
ERROR: "loongson_sysconf" [drivers/platform/mips/cpu_hwmon.ko] undefined!
ERROR: "loongson_chiptemp" [drivers/platform/mips/cpu_hwmon.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92：__modpost] 错误 1
make: *** [Makefile:1261：modules] 错误 2
Signed-off-by: Yupeng Li <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Reviewed-by: Huacai Chen <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, writeback, and quota fixes and cleanups from Jan Kara:
"A fix for race in writeback code and two cleanups in quota and ext2"
* tag 'fs_for_v5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Prevent memory allocation recursion while holding dq_lock
writeback: Fix inode->i_io_list not be protected by inode->i_lock error
fs: Fix syntax errors in comments
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- On 32-bit fix overread/overwrite of thread_struct via ptrace
PEEK/POKE.
- Fix softirqs not switching to the softirq stack since we moved
irq_exit().
- Force thread size increase when KASAN is enabled to avoid stack
overflows.
- On Book3s 64 mark more code as not to be instrumented by KASAN to
avoid crashes.
- Exempt __get_wchan() from KASAN checking, as it's inherently racy.
- Fix a recently introduced crash in the papr_scm driver in some
configurations.
- Remove include of <generated/compile.h> which is forbidden.
Thanks to Ariel Miculas, Chen Jingwen, Christophe Leroy, Erhard Furtner,
He Ying, Kees Cook, Masahiro Yamada, Nageswara R Sastry, Paul Mackerras,
Sachin Sant, Vaibhav Jain, and Wanming Hu.
* tag 'powerpc-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix overread/overwrite of thread_struct via ptrace
powerpc/book3e: get rid of #include <generated/compile.h>
powerpc/kasan: Force thread size increase with KASAN
powerpc/papr_scm: don't requests stats with '0' sized stats buffer
powerpc: Don't select HAVE_IRQ_EXIT_ON_IRQ_STACK
powerpc/kasan: Silence KASAN warnings in __get_wchan()
powerpc/kasan: Mark more real-mode code as not to be instrumented
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- eth: amt: fix possible null-ptr-deref in amt_rcv()
Previous releases - regressions:
- tcp: use alloc_large_system_hash() to allocate table_perturb
- af_unix: fix a data-race in unix_dgram_peer_wake_me()
- nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
- eth: ixgbe: fix unexpected VLAN rx in promisc mode on VF
Previous releases - always broken:
- ipv6: fix signed integer overflow in __ip6_append_data
- netfilter:
- nat: really support inet nat without l3 address
- nf_tables: memleak flow rule from commit path
- bpf: fix calling global functions from BPF_PROG_TYPE_EXT programs
- openvswitch: fix misuse of the cached connection on tuple changes
- nfc: nfcmrvl: fix memory leak in nfcmrvl_play_deferred
- eth: altera: fix refcount leak in altera_tse_mdio_create
Misc:
- add Quentin Monnet to bpftool maintainers"
* tag 'net-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
net: amd-xgbe: fix clang -Wformat warning
tcp: use alloc_large_system_hash() to allocate table_perturb
net: dsa: realtek: rtl8365mb: fix GMII caps for ports with internal PHY
net: dsa: mv88e6xxx: correctly report serdes link failure
net: dsa: mv88e6xxx: fix BMSR error to be consistent with others
net: dsa: mv88e6xxx: use BMSR_ANEGCOMPLETE bit for filling an_complete
net: altera: Fix refcount leak in altera_tse_mdio_create
net: openvswitch: fix misuse of the cached connection on tuple changes
net: ethernet: mtk_eth_soc: fix misuse of mem alloc interface netdev[napi]_alloc_frag
ip_gre: test csum_start instead of transport header
au1000_eth: stop using virt_to_bus()
ipv6: Fix signed integer overflow in l2tp_ip6_sendmsg
ipv6: Fix signed integer overflow in __ip6_append_data
nfc: nfcmrvl: Fix memory leak in nfcmrvl_play_deferred
nfc: st21nfca: fix incorrect sizing calculations in EVT_TRANSACTION
nfc: st21nfca: fix memory leaks in EVT_TRANSACTION handling
nfc: st21nfca: fix incorrect validating logic in EVT_TRANSACTION
net: ipv6: unexport __init-annotated seg6_hmac_init()
net: xfrm: unexport __init-annotated xfrm4_protocol_init()
net: mdio: unexport __init-annotated mdio_bus_init()
...
|
|
Correct a typo in the description of interaction between
the TCM and MMU.
Found by inspection.
Signed-off-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
This is a pure band-aid so that I can continue merging stuff from people
while some of the gcc-12 fallout gets sorted out.
In particular, gcc-12 is very unhappy about the kinds of pointer
arithmetic tricks that netfs does, and that makes the fortify checks
trigger in afs and ceph:
In function ‘fortify_memset_chk’,
inlined from ‘netfs_i_context_init’ at include/linux/netfs.h:327:2,
inlined from ‘afs_set_netfs_context’ at fs/afs/inode.c:61:2,
inlined from ‘afs_root_iget’ at fs/afs/inode.c:543:2:
include/linux/fortify-string.h:258:25: warning: call to ‘__write_overflow_field’ declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
258 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
and the reason is that netfs_i_context_init() is passed a 'struct inode'
pointer, and then it does
struct netfs_i_context *ctx = netfs_i_context(inode);
memset(ctx, 0, sizeof(*ctx));
where that netfs_i_context() function just does pointer arithmetic on
the inode pointer, knowing that the netfs_i_context is laid out
immediately after it in memory.
This is all truly disgusting, since the whole "netfs_i_context is laid
out immediately after it in memory" is not actually remotely true in
general, but is just made to be that way for afs and ceph.
See for example fs/cifs/cifsglob.h:
struct cifsInodeInfo {
struct {
/* These must be contiguous */
struct inode vfs_inode; /* the VFS's inode record */
struct netfs_i_context netfs_ctx; /* Netfslib context */
};
[...]
and realize that this is all entirely wrong, and the pointer arithmetic
that netfs_i_context() is doing is also very very wrong and wouldn't
give the right answer if netfs_ctx had different alignment rules from a
'struct inode', for example).
Anyway, that's just a long-winded way to say "the gcc-12 warning is
actually quite reasonable, and our code happens to work but is pretty
disgusting".
This is getting fixed properly, but for now I made the mistake of
thinking "the week right after the merge window tends to be calm for me
as people take a breather" and I did a sustem upgrade. And I got gcc-12
as a result, so to continue merging fixes from people and not have the
end result drown in warnings, I am fixing all these gcc-12 issues I hit.
Including with these kinds of temporary fixes.
Cc: Kees Cook <[email protected]>
Cc: David Howells <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Linus Torvalds <[email protected]>
|