| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Report the carrier/no-carrier state for the network interface
shared between the BMC and the passthrough channel. Without this
functionality the BMC is unable to reconfigure the NIC in the event
of a re-cabling to a different subnet.
Signed-off-by: Johnathan Mantey <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Syzkaller reported a sleep in atomic context bug relating to the HASHCHK
handler logic:
BUG: sleeping function called from invalid context at arch/powerpc/kernel/traps.c:1518
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 25040, name: syz-executor
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by syz-executor/25040.
irq event stamp: 34
hardirqs last enabled at (33): [<c000000000048b38>] prep_irq_for_enabled_exit arch/powerpc/kernel/interrupt.c:56 [inline]
hardirqs last enabled at (33): [<c000000000048b38>] interrupt_exit_user_prepare_main+0x148/0x600 arch/powerpc/kernel/interrupt.c:230
hardirqs last disabled at (34): [<c00000000003e6a4>] interrupt_enter_prepare+0x144/0x4f0 arch/powerpc/include/asm/interrupt.h:176
softirqs last enabled at (0): [<c000000000281954>] copy_process+0x16e4/0x4750 kernel/fork.c:2436
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 15 PID: 25040 Comm: syz-executor Not tainted 6.5.0-rc5-00001-g3ccdff6bb06d #3
Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1040.00 (NL1040_021) hv:phyp pSeries
Call Trace:
[c0000000a8247ce0] [c00000000032b0e4] __might_resched+0x3b4/0x400 kernel/sched/core.c:10189
[c0000000a8247d80] [c0000000008c7dc8] __might_fault+0xa8/0x170 mm/memory.c:5853
[c0000000a8247dc0] [c00000000004160c] do_program_check+0x32c/0xb20 arch/powerpc/kernel/traps.c:1518
[c0000000a8247e50] [c000000000009b2c] program_check_common_virt+0x3bc/0x3c0
To determine if a trap was caused by a HASHCHK instruction, we inspect
the user instruction that triggered the trap. However this may sleep
if the page needs to be faulted in (get_user_instr() reaches
__get_user(), which calls might_fault() and triggers the bug message).
Move the HASHCHK handler logic to after we allow IRQs, which is fine
because we are only interested in HASHCHK if it's a user space trap.
Fixes: 5bcba4e6c13f ("powerpc/dexcr: Handle hashchk exception")
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
It used to be impossible to select CONFIG_CPM2 without selecting
CONFIG_FSL_SOC at the same time because CONFIG_CPM2 was dependent
on CONFIG_8260 and CONFIG_8260 was selecting CONFIG_FSL_SOC.
But after commit eb5aa2137275 ("powerpc/82xx: Remove CONFIG_8260
and CONFIG_8272") CONFIG_CPM2 depends on CONFIG_PPC_82xx instead
but CONFIG_PPC_82xx doesn't directly selects CONFIG_FSL_SOC.
Fix it by forcing CONFIG_PPC_82xx to select CONFIG_FSL_SOC just
like already done by PPC_8xx, PPC_MPC512x, PPC_83xx, PPC_86xx.
Reported-by: Randy Dunlap <[email protected]>
Fixes: eb5aa2137275 ("powerpc/82xx: Remove CONFIG_8260 and CONFIG_8272")
Signed-off-by: Christophe Leroy <[email protected]>
Tested-by: Randy Dunlap <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/7ab513546148ebe33ddd4b0ea92c7bfd3cce3ad7.1694705016.git.christophe.leroy@csgroup.eu
|
|
FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
We recently added support for -fpatchable-function-entry and it is
enabled by default on ppc32 (ppc64 needs gcc v13.1.0). When building the
kernel for ppc32 and also enabling CONFIG_LD_DEAD_CODE_DATA_ELIMINATION,
we see the below build error with older gcc versions:
powerpc-linux-gnu-ld: init/main.o(__patchable_function_entries): error: need linked-to section for --gc-sections
This error is thrown since __patchable_function_entries section would be
garbage collected with --gc-sections since it does not reference any
other kept sections. This has subsequently been fixed with:
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=b7d072167715829eed0622616f6ae0182900de3e
Disable LD_DEAD_CODE_DATA_ELIMINATION for gcc versions before v11.1.0 if
using -fpatchable-function-entry to avoid this bug.
Fixes: 0f71dcfb4aef ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Reported-by: Michael Ellerman <[email protected]>
Signed-off-by: Naveen N Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
It can be easy to miss that the notifier mechanism invokes the callbacks
in an atomic context, so add some comments to that effect on the two
handlers we register here.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
This is called in an atomic context, so is not allowed to sleep if a
user page needs to be faulted in and has nowhere it can be deferred to.
The pagefault_disabled() function is documented as preventing user
access methods from sleeping.
In practice the page will be mapped in nearly always because we are
reading the instruction that just triggered the watchpoint trap.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
thread_change_pc() uses CPU local data, so must be protected from
swapping CPUs while it is reading the breakpoint struct.
The error is more noticeable after 1e60f3564bad ("powerpc/watchpoints:
Track perf single step directly on the breakpoint"), which added an
unconditional __this_cpu_read() call in thread_change_pc(). However the
existing __this_cpu_read() that runs if a breakpoint does need to be
re-inserted has the same issue.
Signed-off-by: Benjamin Gray <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has
check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But
the check for domain value 0 is missing.
Fix this issue by adding check for domain value 0.
Before:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Error:
The sys_perf_event_open() syscall returned with 5 (Input/output error) for
event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/).
/bin/dmesg | grep -i perf may provide additional information.
Result from dmesg:
[ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret
0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0
After:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel.
failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/
Fixes: ebd4a5a3ebd9 ("powerpc/perf/hv-24x7: Minor improvements")
Reported-by: Krishan Gopal Sarawast <[email protected]>
Signed-off-by: Kajol Jain <[email protected]>
Tested-by: Disha Goel <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Running commands such as
# ./perf stat -e cs -- true
Segmentation fault (core dumped)
# ./perf stat -e cpu-clock-- true
Segmentation fault (core dumped)
#
dump core. This should not happen as these events are defined
even when no hardware PMU is available.
Debugging this reveals this call chain:
perf_pmus__find_by_type(type=1)
+--> pmu_read_sysfs(core_only=false)
+--> perf_pmu__find2(dirfd=3, name=0x152a113 "software")
+--> perf_pmu__lookup(pmus=0x14f0568 <other_pmus>, dirfd=3,
lookup_name=0x152a113 "software")
+--> perf_pmu__find_events_table (pmu=0x1532130)
Now the pmu is "software" and it tries to find a proper table
generated by the pmu-event generation process for s390:
# cd pmu-events/
# ./jevents.py s390 all /root/linux/tools/perf/pmu-events/arch |\
grep -E '^const struct pmu_table_entry'
const struct pmu_table_entry pmu_events__cf_z10[] = {
const struct pmu_table_entry pmu_events__cf_z13[] = {
const struct pmu_table_entry pmu_metrics__cf_z13[] = {
const struct pmu_table_entry pmu_events__cf_z14[] = {
const struct pmu_table_entry pmu_metrics__cf_z14[] = {
const struct pmu_table_entry pmu_events__cf_z15[] = {
const struct pmu_table_entry pmu_metrics__cf_z15[] = {
const struct pmu_table_entry pmu_events__cf_z16[] = {
const struct pmu_table_entry pmu_metrics__cf_z16[] = {
const struct pmu_table_entry pmu_events__cf_z196[] = {
const struct pmu_table_entry pmu_events__cf_zec12[] = {
const struct pmu_table_entry pmu_metrics__cf_zec12[] = {
const struct pmu_table_entry pmu_events__test_soc_cpu[] = {
const struct pmu_table_entry pmu_metrics__test_soc_cpu[] = {
const struct pmu_table_entry pmu_events__test_soc_sys[] = {
#
However event "software" is not listed, as can be seen in the
generated const struct pmu_events_map pmu_events_map[].
So in function perf_pmu__find_events_table(), the variable
table is initialized to NULL, but never set to a proper
value. The function scans all generated &pmu_events_map[]
tables, but no table matches, because the tables are
s390 CPU Measurement unit specific:
i = 0;
for (;;) {
const struct pmu_events_map *map = &pmu_events_map[i++];
if (!map->arch)
break;
--> the maps are there because the build generated them
if (!strcmp_cpuid_str(map->cpuid, cpuid)) {
table = &map->event_table;
break;
}
--> Since no matching CPU string the table var remains 0x0
}
free(cpuid);
if (!pmu)
return table;
--> The pmu is "software" so it exists and no return
--> and here perf dies because table is 0x0
for (i = 0; i < table->num_pmus; i++) {
...
}
return NULL;
Fix this and do not access the table variable. Instead return 0x0
which is the same return code when the for-loop was not successful.
Output after:
# ./perf stat -e cs -- true
Performance counter stats for 'true':
0 cs
0.000853105 seconds time elapsed
0.000061000 seconds user
0.000827000 seconds sys
# ./perf stat -e cpu-clock -- true
Performance counter stats for 'true':
0.25 msec cpu-clock # 0.341 CPUs utilized
0.000728383 seconds time elapsed
0.000055000 seconds user
0.000706000 seconds sys
# ./perf stat -e cycles -- true
Performance counter stats for 'true':
<not supported> cycles
0.000767298 seconds time elapsed
0.000055000 seconds user
0.000739000 seconds sys
#
Fixes: 7c52f10c0d4d8 ("perf pmu: Cache JSON events table")
Signed-off-by: Thomas Richter <[email protected]>
Reviewed-by: Ian Rogers <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Fix an error detected by memory sanitizer:
```
==4033==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6
#1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2
#2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9
#3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32
#4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6
#5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8
#6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8
#7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9
#8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8
#9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15
#10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9
#11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8
#12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5
#13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9
#14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11
#15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8
#16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2
#17 0x55fb0f941dab in main tools/perf/perf.c:535:3
```
Fixes: 7b723dbb96e8 ("perf pmu: Be lazy about loading event info files from sysfs")
Signed-off-by: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
The parser wraps all strings as Events, so the input is an
Event. Using a string would be bad as functions like Simplify are
called on the arguments, which wouldn't be present on a string.
Fixes: 9d5da30e4ae9 ("perf jevents: Add a new expression builtin strcmp_cpuid_str()")
Signed-off-by: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Kajol Jain <[email protected]>
Cc: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Make part of an existing TODO conditional to avoid the following build
error:
```
tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:14: error: cannot combine with previous 'char' declaration specifier
26 | typedef char bool;
| ^
include/stdbool.h:20:14: note: expanded from macro 'bool'
20 | #define bool _Bool
| ^
tools/perf/util/bpf_skel/augmented_raw_syscalls.bpf.c:26:1: error: typedef requires a name [-Werror,-Wmissing-declarations]
26 | typedef char bool;
| ^~~~~~~~~~~~~~~~~
2 errors generated.
```
Signed-off-by: Ian Rogers <[email protected]>
Cc: Leo Yan <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
Commit 3d6dfae88917 ("perf parse-events: Remove BPF event support")
removed building bpf-prologue.c but failed to remove the actual file.
Fixes: 3d6dfae88917 ("perf parse-events: Remove BPF event support")
Signed-off-by: Ian Rogers <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Namhyung Kim <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix an UV boot crash
- Skip spurious ENDBR generation on _THIS_IP_
- Fix ENDBR use in putuser() asm methods
- Fix corner case boot crashes on 5-level paging
- and fix a false positive WARNING on LTO kernels"
* tag 'x86-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/purgatory: Remove LTO flags
x86/boot/compressed: Reserve more memory for page tables
x86/ibt: Avoid duplicate ENDBR in __put_user_nocheck*()
x86/ibt: Suppress spurious ENDBR
x86/platform/uv: Use alternate source for socket to node data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix a performance regression on large SMT systems, an Intel SMT4
balancing bug, and a topology setup bug on (Intel) hybrid processors"
* tag 'sched-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sched: Restore the SD_ASYM_PACKING flag in the DIE domain
sched/fair: Fix SMT4 group_smt_balance handling
sched/fair: Optimize should_we_balance() for large SMT systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Ingo Molnar:
"Fix a cold functions related false-positive objtool warning that
triggers on Clang"
* tag 'objtool-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix _THIS_IP_ detection for cold functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull WARN fix from Ingo Molnar:
"Fix a missing preempt-enable in the WARN() slowpath"
* tag 'core-urgent-2023-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
panic: Reenable preemption in WARN slowpath
|
|
The choose_32_64() macros were added to deal with an odd inconsistency
between the 32-bit and 64-bit layout of 'struct stat' way back when in
commit a52dd971f947 ("vfs: de-crapify "cp_new_stat()" function").
Then a decade later Mikulas noticed that said inconsistency had been a
mistake in the early x86-64 port, and shouldn't have existed in the
first place. So commit 932aba1e1690 ("stat: fix inconsistency between
struct stat and struct compat_stat") removed the uses of the helpers.
But the helpers remained around, unused.
Get rid of them.
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull smb client fixes from Steve French:
"Three small SMB3 client fixes, one to improve a null check and two
minor cleanups"
* tag '6.6-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix some minor typos and repeated words
smb3: correct places where ENOTSUPP is used instead of preferred EOPNOTSUPP
smb3: move server check earlier when setting channel sequence number
|
|
Pull smb server fixes from Steve French:
"Two ksmbd server fixes"
* tag '6.6-rc1-ksmbd' of git://git.samba.org/ksmbd:
ksmbd: fix passing freed memory 'aux_payload_buf'
ksmbd: remove unneeded mark_inode_dirty in set_info_sec()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes for ext4"
* tag 'ext4_for_linus-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix rec_len verify error
ext4: do not let fstrim block system suspend
ext4: move setting of trimmed bit into ext4_try_to_trim_range()
jbd2: Fix memory leak in journal_init_common()
jbd2: Remove page size assumptions
buffer: Make bh_offset() work for compound pages
|
|
queue
Tony Nguyen says:
====================
This series contains updates to iavf and i40e drivers.
Radoslaw prevents admin queue operations being added when the driver is
being removed for iavf.
Petr Oros immediately starts reconfiguration on changes to VLANs on
iavf.
Ivan Vecera moves reset of VF to occur after port VLAN values are set
on i40e.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Nothing prevents iscsi_sw_tcp_conn_bind() to receive file descriptor
pointing to non TCP socket (af_unix for example).
Return -EINVAL if this is attempted, instead of crashing the kernel.
Fixes: 7ba247138907 ("[SCSI] open-iscsi/linux-iscsi-5 Initiator: Initiator code")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Lee Duncan <[email protected]>
Cc: Chris Leech <[email protected]>
Cc: Mike Christie <[email protected]>
Cc: "James E.J. Bottomley" <[email protected]>
Cc: "Martin K. Petersen" <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Mike Christie <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, we assume the skb is associated with a device before calling
__ip_options_compile, which is not always the case if it is re-routed by
ipvs.
When skb->dev is NULL, dev_net(skb->dev) will become null-dereference.
This patch adds a check for the edge case and switch to use the net_device
from the rtable when skb->dev is NULL.
Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure")
Suggested-by: David Ahern <[email protected]>
Signed-off-by: Kyle Zeng <[email protected]>
Cc: Stephen Suryaputra <[email protected]>
Cc: Vadim Fedorenko <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
-flto* implies -ffunction-sections. With LTO enabled, ld.lld generates
multiple .text sections for purgatory.ro:
$ readelf -S purgatory.ro | grep " .text"
[ 1] .text PROGBITS 0000000000000000 00000040
[ 7] .text.purgatory PROGBITS 0000000000000000 000020e0
[ 9] .text.warn PROGBITS 0000000000000000 000021c0
[13] .text.sha256_upda PROGBITS 0000000000000000 000022f0
[15] .text.sha224_upda PROGBITS 0000000000000000 00002be0
[17] .text.sha256_fina PROGBITS 0000000000000000 00002bf0
[19] .text.sha224_fina PROGBITS 0000000000000000 00002cc0
This causes WARNING from kexec_purgatory_setup_sechdrs():
WARNING: CPU: 26 PID: 110894 at kernel/kexec_file.c:919
kexec_load_purgatory+0x37f/0x390
Fix this by disabling LTO for purgatory.
[ AFAICT, x86 is the only arch that supports LTO and purgatory. ]
We could also fix this with an explicit linker script to rejoin .text.*
sections back into .text. However, given the benefit of LTOing purgatory
is small, simply disable the production of more .text.* sections for now.
Fixes: b33fff07e3e3 ("x86, build: allow LTO to be selected")
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Sami Tolvanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The decompressor has a hard limit on the number of page tables it can
allocate. This limit is defined at compile-time and will cause boot
failure if it is reached.
The kernel is very strict and calculates the limit precisely for the
worst-case scenario based on the current configuration. However, it is
easy to forget to adjust the limit when a new use-case arises. The
worst-case scenario is rarely encountered during sanity checks.
In the case of enabling 5-level paging, a use-case was overlooked. The
limit needs to be increased by one to accommodate the additional level.
This oversight went unnoticed until Aaron attempted to run the kernel
via kexec with 5-level paging and unaccepted memory enabled.
Update wost-case calculations to include 5-level paging.
To address this issue, let's allocate some extra space for page tables.
128K should be sufficient for any use-case. The logic can be simplified
by using a single value for all kernel configurations.
[ Also add a warning, should this memory run low - by Dave Hansen. ]
Fixes: 34bbb0009f3b ("x86/boot/compressed: Enable 5-level paging during decompression stage")
Reported-by: Aaron Lu <[email protected]>
Signed-off-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid long argument lists in make modules_install
kbuild: fix kernel-devel RPM package and linux-headers Deb package
|
|
Commit 408579cd627a ("mm: Update do_vmi_align_munmap() return
semantics") seems to have updated one of the callers of do_vmi_munmap()
incorrectly: it used to check for the error case (which didn't
change: negative means error).
That commit changed the check to the success case (which did change:
before that commit, 0 was success, and 1 was "success and lock
downgraded". After the change, it's always 0 for success, and the lock
will have been released if requested).
This didn't change any actual VM behavior _except_ for memory accounting
when 'VM_ACCOUNT' was set on the vma. Which made the wrong return value
test fairly subtle, since everything continues to work.
Or rather - it continues to work but the "Committed memory" accounting
goes all wonky (Committed_AS value in /proc/meminfo), and depending on
settings that then causes problems much much later as the VM relies on
bogus statistics for its heuristics.
Revert that one line of the change back to the original logic.
Fixes: 408579cd627a ("mm: Update do_vmi_align_munmap() return semantics")
Reported-by: Christoph Biedl <[email protected]>
Reported-bisected-and-tested-by: Michael Labiuk <[email protected]>
Cc: Bagas Sanjaya <[email protected]>
Cc: Liam R. Howlett <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"16 small(ish) fixes all in drivers.
The major fixes are in pm8001 (fixes MSI-X issue going back to its
origin), the qla2xxx endianness fix, which fixes a bug on big endian
and the lpfc ones which can cause an oops on module removal without
them"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Prevent use-after-free during rmmod with mapped NVMe rports
scsi: lpfc: Early return after marking final NLP_DROPPED flag in dev_loss_tmo
scsi: lpfc: Fix the NULL vs IS_ERR() bug for debugfs_create_file()
scsi: target: core: Fix target_cmd_counter leak
scsi: pm8001: Setup IRQs on resume
scsi: pm80xx: Avoid leaking tags when processing OPC_INB_SET_CONTROLLER_CONFIG command
scsi: pm80xx: Use phy-specific SAS address when sending PHY_START command
scsi: ufs: core: Poll HCS.UCRDY before issuing a UIC command
scsi: ufs: core: Move __ufshcd_send_uic_cmd() outside host_lock
scsi: qedf: Add synchronization between I/O completions and abort
scsi: target: Replace strlcpy() with strscpy()
scsi: qla2xxx: Fix NULL vs IS_ERR() bug for debugfs_create_dir()
scsi: qla2xxx: Use raw_smp_processor_id() instead of smp_processor_id()
scsi: qla2xxx: Correct endianness for rqstlen and rsplen
scsi: ppa: Fix accidentally reversed conditions for 16-bit and 32-bit EPP
scsi: megaraid_sas: Fix deadlock on firmware crashdump
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Fix link power management transitions to disallow unsupported states
(Niklas)
- A small string handling fix for the sata_mv driver (Christophe)
- Clear port pending interrupts before reset, as per AHCI
specifications (Szuying).
Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in
ata_eh_reset() to allow EH to continue on with other actions recorded
with error interrupts triggered before EH completes. And an
additional fix to avoid thawing a port twice in EH (Niklas)
- Small code style fixes in the pata_parport driver to silence the
build bot as it keeps complaining about bad indentation (me)
- A fix for the recent CDL code to avoid fetching sense data for
successful commands when not necessary for correct operation (Niklas)
* tag 'ata-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: fetch sense data for successful commands iff CDL enabled
ata: libata-eh: do not thaw the port twice in ata_eh_reset()
ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset()
ata: pata_parport: Fix code style issues
ata: libahci: clear pending interrupt status
ata: sata_mv: Fix incorrect string length computation in mv_dump_mem()
ata: libata: disallow dev-initiated LPM transitions to unsupported states
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fix from Greg KH:
"Here is a single USB fix for a much-reported regression for 6.6-rc1.
It resolves a crash in the typec debugfs code for many systems. It's
been in linux-next with no reported issues, and many people have
reported it resolving their problem with 6.6-rc1"
* tag 'usb-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Fix NULL pointer dereference
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is a single driver core fix for a much-reported-by-sysbot issue
that showed up in 6.6-rc1. It's been submitted by many people, all in
the same way, so it obviously fixes things for them all.
Also in here is a single documentation update adding riscv to the
embargoed hardware document in case there are any future issues with
that processor family.
Both of these have been in linux-next with no reported problems"
* tag 'driver-core-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for RISC-V
driver core: return an error when dev_set_name() hasn't happened
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg KH:
"Here is a single patch for 6.6-rc2 that reverts a 6.5 change for the
comedi subsystem that has ended up being incorrect and caused drivers
that were working for people to be unable to be able to be selected to
build at all.
To fix this, the Kconfig change needs to be reverted and a future set
of fixes for the ioport dependancies will show up in 6.7-rc1 (there's
no rush for them.)
This has been in linux-next with no reported issues"
* tag 'char-misc-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "comedi: add HAS_IOPORT dependencies"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The main thing is the removal of 'probe_new' because all i2c client
drivers are converted now. Thanks Uwe, this marks the end of a long
conversion process.
Other than that, we have a few Kconfig updates and driver bugfixes"
* tag 'i2c-for-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: cadence: Fix the kernel-doc warnings
i2c: aspeed: Reset the i2c controller when timeout occurs
i2c: I2C_MLXCPLD on ARM64 should depend on ACPI
i2c: Make I2C_ATR invisible
i2c: Drop legacy callback .probe_new()
w1: ds2482: Switch back to use struct i2c_driver's .probe()
|
|
When an XDP redirect happens before the link is ready, that
transmission will not finish and will timeout, causing an adapter
reset. If the redirects do not stop, the adapter will not stop
resetting.
Wait for the driver to signal that there's a carrier before allowing
transmissions to proceed.
Previous code was relying that when __IGC_DOWN is cleared, the NIC is
ready to transmit as all the queues are ready, what happens is that
the carrier presence will only be signaled later, after the watchdog
workqueue has a chance to run. And during this interval (between
clearing __IGC_DOWN and the watchdog running) if any transmission
happens the timeout is emitted (detected by igc_tx_timeout()) which
causes the reset, with the potential for the infinite loop.
Fixes: 4ff320361092 ("igc: Add support for XDP_REDIRECT action")
Reported-by: Ferenc Fejes <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Tested-by: Ferenc Fejes <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Tested-by: Naama Meir <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use bitmap_zalloc() and bitmap_free() instead of hand-writing them.
It is less verbose and it improves the type checking and semantic.
While at it, add missing header inclusion (should be bitops.h,
but with the above change it becomes bitmap.h).
Suggested-by: Sergey Ryazanov <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Andy Shevchenko <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, we fetch sense data for a _successful_ command if either:
1) Command was NCQ and ATA_DFLAG_CDL_ENABLED flag set (flag
ATA_DFLAG_CDL_ENABLED will only be set if the Successful NCQ command
sense data supported bit is set); or
2) Command was non-NCQ and regular sense data reporting is enabled.
This means that case 2) will trigger for a non-NCQ command which has
ATA_SENSE bit set, regardless if CDL is enabled or not.
This decision was by design. If the device reports that it has sense data
available, it makes sense to fetch that sense data, since the sk/asc/ascq
could be important information regardless if CDL is enabled or not.
However, the fetching of sense data for a successful command is done via
ATA EH. Considering how intricate the ATA EH is, we really do not want to
invoke ATA EH unless absolutely needed.
Before commit 18bd7718b5c4 ("scsi: ata: libata: Handle completion of CDL
commands using policy 0xD") we never fetched sense data for successful
commands.
In order to not invoke the ATA EH unless absolutely necessary, even if the
device claims support for sense data reporting, only fetch sense data for
successful (NCQ and non-NCQ commands) commands that are using CDL.
[Damien] Modified the check to test the qc flag ATA_QCFLAG_HAS_CDL
instead of the device support for CDL, which is implied for commands
using CDL.
Fixes: 3ac873c76d79 ("ata: libata-core: fix when to fetch sense data for successful commands")
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
commit 1e641060c4b5 ("libata: clear eh_info on reset completion") added
a workaround that broke the retry mechanism in ATA EH.
Tejun himself suggested to remove this workaround when it was identified
to cause additional problems:
https://lore.kernel.org/linux-ide/[email protected]/
He even said:
"Hmm... it seems I wasn't thinking straight when I added that work around."
https://lore.kernel.org/linux-ide/[email protected]/
While removing the workaround solved the issue, however, the workaround was
kept to avoid "spurious hotplug events during reset", and instead another
workaround was added on top of the existing workaround in commit
8c56cacc724c ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Because these IRQs happened when the port was frozen, we know that they
were actually a side effect of PxIS and IS.IPS(x) not being cleared before
the COMRESET. This is now done in commit 94152042eaa9 ("ata: libahci: clear
pending interrupt status"), so these workarounds can now be removed.
Since commit 1e641060c4b5 ("libata: clear eh_info on reset completion") has
now been reverted, the ATA EH retry mechanism is functional again, so there
is once again no need to thaw the port more than once in ata_eh_reset().
This reverts "the workaround on top of the workaround" introduced in commit
8c56cacc724c ("libata: fix unexpectedly frozen port after ata_eh_reset()").
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4b5 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3db ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4b5 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4b5 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
The ionic device supports a maximum buffer length of 16 bits (see
ionic_rxq_desc or ionic_rxq_sg_elem). When adding new buffers to
the receive rings, the function ionic_rx_fill() uses 16bit math when
calculating the number of pages to allocate for an RX descriptor,
given the interface's MTU setting. If the system PAGE_SIZE >= 64KB,
and the buf_info->page_offset is 0, the remain_len value will never
decrement from the original MTU value and the frag_len value will
always be 0, causing additional pages to be allocated as scatter-
gather elements unnecessarily.
A similar math issue exists in ionic_rx_frags(), but no failures
have been observed here since a 64KB page should not normally
require any scatter-gather elements at any legal Ethernet MTU size.
Fixes: 4b0a7539a372 ("ionic: implement Rx page reuse")
Signed-off-by: David Christensen <[email protected]>
Reviewed-by: Shannon Nelson <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
At the implementation of the optional proc fs in rawmidi, I forgot
that rmidi->ops itself is optional and can be NULL.
Add the proper NULL check for avoiding the Oops.
Fixes: fa030f666d24 ("ALSA: ump: Additional proc output")
Reported-and-tested-by: Mark Hills <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more kselftest fixes from Shuah Khan
"Fixes to user_events test and ftrace test.
The user_events test was enabled by default in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- add checks for dependencies and skip the test if they aren't met.
The user_events test requires root access, and tracefs and
user_events enabled. It leaves tracefs mounted and a fix is in
progress for that missing piece.
- create user_events test-specific Kconfig fragments
ftrace test fixes:
- unmount tracefs for recovering environment. Fix identified during
the above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage"
* tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Fix to unmount tracefs for recovering environment
selftests: user_events: create test-specific Kconfig fragments
ftrace/selftests: Add softlink to latest log directory
selftests/user_events: Fix failures when user_events is not installed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Use correct order when encoding NFSv4 RENAME change_info
- Fix a potential oops during NFSD shutdown
* tag 'nfsd-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix possible oops when nfsd/pool_stats is closed.
nfsd: fix change_info in NFSv4 RENAME replies
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"Fix the handling of block devices in the test_resume mode of
hibernation (Chen Yu)"
* tag 'pm-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix the exclusive get block device in test_resume mode
PM: hibernate: Rename function parameter from snapshot_test to exclusive
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"These fix a thermal core breakage introduced by one of the recent
changes, amend those changes by adding 'const' to a new callback
argument and fix two memory leaks.
Specifics:
- Unbreak disabled trip point check in handle_thermal_trip() that may
cause it to skip enabled trip points (Rafael Wysocki)
- Add missing of_node_put() to of_find_trip_id() and
thermal_of_for_each_cooling_maps() that each break out of a
for_each_child_of_node() loop without dropping the reference to the
child object (Julia Lawall)
- Constify the recently added trip argument of the .get_trend()
thermal zone callback (Rafael Wysocki)"
* tag 'thermal-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: core: Fix disabled trip point check in handle_thermal_trip()
thermal: Constify the trip argument of the .get_trend() zone callback
thermal/of: add missing of_node_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM core retrieve_deps() UAF race due to missing locking of a DM
table's list of devices that is managed using dm_{get,put}_device.
- Revert DM core's half-baked RCU optimization if IO submitter has set
REQ_NOWAIT. Can be revisited, and properly justified, after
comprehensively auditing all of DM to also pass GFP_NOWAIT for any
allocations if REQ_NOWAIT used.
* tag 'for-6.6/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: don't attempt to queue IO under RCU protection
dm: fix a race condition in retrieve_deps
|
|
Pull block fixes from Jens Axboe:
- NVMe pull via Keith:
- nvme-tcp iov len fix (Varun)
- nvme-hwmon const qualifier for safety (Krzysztof)
- nvme-fc null pointer checks (Nigel)
- nvme-pci no numa node fix (Pratyush)
- nvme timeout fix for non-compliant controllers (Keith)
- MD pull via Song fixing regressions with both 6.5 and 6.6
- Fix a use-after-free regression in resizing blk-mq tags (Chengming)
* tag 'block-6.6-2023-09-15' of git://git.kernel.dk/linux:
nvme: avoid bogus CRTO values
md: Put the right device in md_seq_next
nvme-pci: do not set the NUMA node of device if it has none
blk-mq: fix tags UAF when shrinking q->nr_hw_queues
md/raid1: fix error: ISO C90 forbids mixed declarations
md: fix warning for holder mismatch from export_rdev()
md: don't dereference mddev after export_rdev()
nvme-fc: Prevent null pointer dereference in nvme_fc_io_getuuid()
nvme: host: hwmon: constify pointers to hwmon_channel_info
nvmet-tcp: pass iov_len instead of sg->length to bvec_set_page()
|
|
Pull io_uring fix from Jens Axboe:
"Just a single fix, fixing a regression with poll first, recvmsg, and
using a provided buffer"
* tag 'io_uring-6.6-2023-09-15' of git://git.kernel.dk/linux:
io_uring/net: fix iter retargeting for selected buf
|