aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-05-31nfp: add missing fall through statementsJakub Kicinski1-0/+2
GCC 7 checks for fall through comments, add the two missing ones. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31sched: add helper for updating statistics on all actionsJakub Kicinski4-27/+23
Forgetting to disable preemption around tcf_action_stats_update() seems to be a common mistake. Add a helper function for updating stats on all actions of a filter. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31Merge branch '10GbE' of ↵David S. Miller9-80/+180
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 10GbE Intel Wired LAN Driver Updates 2017-05-31 This series contains updates to ixgbe and ixgbevf only. Scott enables support for TSO & GSO for MPLS encapsulated packets for both ixgbe and ixgbevf. Liwei Song fixes an issue where seqcount/seqlock in ixgbe_get_stats64() are not initialized in time, so move the initialization into probe routine after the transmit and receive rings are initialized. Paul cleans up led_[on|off] for X550EM_X, since the firmware configures the PHY & MAC and we have no PHY access so LED on/off is not supported with this device. Emil provides several fixes, starting with enabling RSS on VF to VF traffic on the same PF. Fixed PHY identification, where the previous method was unreliable, so use a different register to ensure proper identification. Cleaned up the logic which could cause us to skip the link configuration, this skipping over the link configuration was leaving SFP+ PHY's in an unstable state, so always call setup_mac_link(). Added RS1 (rate select 1) support for ixgbe. Lastly, fixed incorrect logic in the setting up of SFP+ link speed. Mark fixes the thermal sensor event logic, where it was being executed when there really was no thermal event. So simplify the logic to only execute when there is a thermal event. Tony adds additional error checks and reporting when setting a VF MAC address to ensure that the MAC filter was successfully added. Also fixed possible truncation warnings, as well as implicit fallthrough warnings. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31Merge branch '40GbE' of ↵David S. Miller9-19/+77
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-05-31 This series contains updates to i40e and i40evf only. Jesse provides a couple of fixes, starting with cleaning up duplicate lines of code. Fixed a missing line which enables RSS as a negotiated feature. Since the VF does not have any way of reporting FCoE enabled, so just force the code to always report FCoE as disabled. Jake provides several fixes and changes, starting with fixing a race condition in i40e. The hardware has a limitation on transmit PTP packets, which requires us to limit the driver to timestamping a single packet at once. This is done using a state bitlock which enforces that only one timestamp request is honored at a time, unfortunately this suffers from a race condition. Fixed a corner case where we failed to cleanup the bit lock after a failed transmit, and resulted in a state bit being locked forever. Added a new statistic which tracks when a transmit timestamp request is skipped/ignored, since the driver can only handle one transmit timestamp request at a time. Christophe Jaillet fixes a NULL pointer dereference if kzalloc fails. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31netvsc: Add #include's for csum_* function declarationsMichael Kelley1-0/+2
Add direct #include statements for declarations of csum_tcpudp_magic() and csum_ipv6_magic(). While the needed #include's are picked up indirectly for the x86 architecture, they aren't on other architectures, resulting in compile errors. Signed-off-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31rtnetlink: use the new rtnl_get_event() interfaceVlad Yasevich1-1/+1
Small clean-up to rtmsg_ifinfo() to use the rtnl_get_event() interface instead of using 'internal' values directly. Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31samples/bpf: bpf_load.c order of prog_fd[] should correspond with ELF orderJesper Dangaard Brouer1-14/+5
An eBPF ELF file generated with LLVM can contain several program section, which can be used for bpf tail calls. The bpf prog file descriptors are accessible via array prog_fd[]. At-least XDP samples assume ordering, and uses prog_fd[0] is the main XDP program to attach. The actual order of array prog_fd[] depend on whether or not a bpf program section is referencing any maps or not. Not using a map result in being loaded/processed after all other prog section. Thus, this can lead to some very strange and hard to debug situation, as the user can only see a FD and cannot correlated that with the ELF section name. The fix is rather simple, and even removes duplicate memcmp code. Simply load program sections as the last step, instead of load_and_attach while processing the relocation section. When working with tail calls, it become even more essential that the order of prog_fd[] is consistant, like the current dependency of the map_fd[] order. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net/mlxfw: select CONFIG_XZ_DECArnd Bergmann1-0/+1
The new mlxfw code fails to build without the xz library: drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.o: In function `mlxfw_mfa2_xz_dec_run': :(.text.mlxfw_mfa2_xz_dec_run+0x8): undefined reference to `xz_dec_run' drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.o: In function `mlxfw_mfa2_file_component_get': :(.text.mlxfw_mfa2_file_component_get+0x218): undefined reference to `xz_dec_init' :(.text.mlxfw_mfa2_file_component_get+0x2c0): undefined reference to `xz_dec_end' This adds a Kconfig 'select' statement for it, which is also what the other user of that library has. Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: remove dev arg of dsa_register_switchVivien Didelot8-12/+12
The current dsa_register_switch function takes a useless struct device pointer argument, which always equals ds->dev. Drivers either call it with ds->dev, or with the same device pointer passed to dsa_switch_alloc, which ends up being assigned to ds->dev. This patch removes the second argument of the dsa_register_switch and _dsa_register_switch functions. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31Merge branch 'dsa-mv88e6xxx-PHY-nitpicks'David S. Miller3-40/+45
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: PHY nitpicks This patchset isolates more PPU code into phy.c and makes distinction between PHY Registers read and write implementations vs. generic PHY routines. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: mv88e6xxx: rename PHY PPU functionsVivien Didelot1-19/+19
Respect the implicit naming convention used in all register sets specific files, by renaming the mv88e6xxx_ppu_* functions with the mv88e6xxx_phy_* prefix. This is simply a s/xxx_ppu/xxx_phy_ppu/ substitution. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: mv88e6xxx: rename PHY PPU accessorsVivien Didelot3-14/+17
Make it clear that mv88e6xxx_phy_ppu_{read,write} are an implementation of the .phy_{read,write} operations, by renaming them with the mv88e6185 prefix, since 88E6185 it is the reference switch model supported in an upstream board (ZII Dev Rev B), which makes use of them. Distinguish the signatures of implementation specific and generic PHY functions in the phy.h header. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: mv88e6xxx: provide a PHY setup helperVivien Didelot3-9/+11
Similarly to the VTU, PVT and ATU setup, provide a mv88e6xxx_phy_setup helper which wraps mv88e6xxx_ppu_enable, so that no more PPU-related functions are exposed outside of phy.c. Thus make mv88e6xxx_ppu_enable static. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31ixgbe: fix incorrect status checkEmil Tantilov1-4/+4
Check for ret_val instead of !ret_val to allow the rest of the code to execute and configure the speed properly. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: add missing configuration for rate select 1Emil Tantilov1-0/+19
Add RS1 configuration to ixgbe_set_soft_rate_select_speed() Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: always call setup_mac_link for multispeed fiberEmil Tantilov1-18/+0
Remove the logic which would previously skip the link configuration in the case where we are already at the requested speed in ixgbe_setup_mac_link_multispeed_fiber(). By exiting early we are skipping the link configuration and as such the driver may not always configure the PHY correctly for SFP+. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: add write flush when configuring CS4223/7Emil Tantilov1-2/+18
Make sure the writes are processed immediately. Without the flush it is possible for operations on one port to spill over the other as the resource is shared. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: correct CS4223/7 PHY identificationEmil Tantilov2-6/+7
Previous method was unreliable. Use a different register to differentiate between the SKUs. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbevf: Resolve warnings for -Wimplicit-fallthroughTony Nguyen1-0/+2
Additions to gcc 7 now warn whenever a switch statement falls through implicitly. This patch adds explicit fall through comments to address the following warnings: drivers/net/ethernet/intel/ixgbevf/vf.c: In function ‘ixgbevf_get_reta_locked’: drivers/net/ethernet/intel/ixgbevf/vf.c:336:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->mac.type < ixgbe_mac_X550_vf) ^ drivers/net/ethernet/intel/ixgbevf/vf.c:338:2: note: here default: ^~~~~~~ drivers/net/ethernet/intel/ixgbevf/vf.c: In function ‘ixgbevf_get_rss_key_locked’: drivers/net/ethernet/intel/ixgbevf/vf.c:402:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->mac.type < ixgbe_mac_X550_vf) ^ drivers/net/ethernet/intel/ixgbevf/vf.c:404:2: note: here default: ^~~~~~~ Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbevf: Resolve truncation warning for q_vector->nameTony Nguyen1-7/+7
The following warning is now shown as a result of new checks added for gcc 7: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_open’: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1363:13: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size between 3 and 18 [-Wformat-truncation=] "%s-%s-%d", netdev->name, "TxRx", ri++); ^~ drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1363:6: note: directive argument in the range [0, 2147483647] "%s-%s-%d", netdev->name, "TxRx", ri++); ^~~~~~~~~~ drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1362:4: note: ‘snprintf’ output between 8 and 32 bytes into a destination of size 24 snprintf(q_vector->name, sizeof(q_vector->name) - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-%s-%d", netdev->name, "TxRx", ri++); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Resolve this warning by making a couple of changes. - Don't reserve space for the null terminator. Since snprintf adds the null terminator automatically, there is no need for us to reserve a byte for it. - Change a couple variables that can never be negative from int to unsigned int. While we're making changes to the format string, move the constant strings into the format string instead of providing them as specifiers. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Resolve warnings for -Wimplicit-fallthroughTony Nguyen5-11/+18
This patch adds/changes fall through comments to address new warnings produced by gcc 7. Fixed formatting on a couple of comments in the function. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Resolve truncation warning for q_vector->nameTony Nguyen1-7/+7
The following warning is now shown as a result of new checks added for gcc 7: drivers/net/ethernet/intel/ixgbe/ixgbe_main.c: In function ‘ixgbe_open’: drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3118:13: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size between 3 and 18 [-Wformat-truncation=] "%s-%s-%d", netdev->name, "TxRx", ri++); ^~ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3118:6: note: directive argument in the range [0, 2147483647] "%s-%s-%d", netdev->name, "TxRx", ri++); ^~~~~~~~~~ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c:3117:4: note: ‘snprintf’ output between 8 and 32 bytes into a destination of size 24 snprintf(q_vector->name, sizeof(q_vector->name) - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-%s-%d", netdev->name, "TxRx", ri++); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Resolve this warning by making a couple of changes. - Don't reserve space for the null terminator. Since snprintf adds the null terminator automatically, there is no need for us to reserve a byte for it. - Change a couple variables that can never be negative from int to unsigned int. While we're making changes to the format string, move the constant strings into the format string instead of providing them as specifiers. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Add error checking to setting VF MACTony Nguyen1-13/+41
Currently, when setting a VF MAC address there are no error checks to ensure that the MAC filter was successfully added. This patch adds additional error checks, reporting, and propagation of errors. It also will not set the MAC address unless adding the MAC filter was successful. With these changes, setting the mac address to zeros can no longer call ixgbe_set_vf_mac() as adding a zero MAC address filter is not valid. Instead directly delete the filter and, if successful, clear the MAC address. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Correct thermal sensor event checkMark Rustad1-2/+1
The thermal sensor event logic is messed up, because it can execute the code when there is no thermal event. The current logic is that it will exit when !capable && !event whereas it really should exit when !capable || !event. For one thing, it means that the service task is doing too much work. It probably has some other symptoms as well. So, correct the logic, simplifying to only execute when there is a thermal event. The capable check is redundant. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: enable L3/L4 filtering for Tx switched packetsEmil Tantilov1-0/+3
This will ensure that VF-to-VF traffic on the same PF is filtered to allow RSS operation. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: Remove MAC X550EM_X 1Gbase-t led_[on|off] supportPaul Greenwalt3-2/+29
Since FW configures the PHY and MAC X550EM_X has no PHY access, led_[on|off] is not supported with the 1Gbase-t design. Removed MAC X550EM_X 1Gbase-t led_[on|off] support by setting function pointers to NULL and added NULL pointer checks. Also set init_led_link_act to NULL and added NULL pointer check. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe: initialize u64_stats_sync structures early at ixgbe_probeLiwei Song1-4/+4
Fix the following CallTrace: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 71 PID: 1 Comm: swapper/0 Not tainted 4.8.8-WR9.0.0.1_standard #11 Hardware name: Intel Corporation S2600WTT/S2600WTT, BIOS GRNDSDP1.86B.0036.R05.1407140519 07/14/2014 00200086 00200086 eb5e1ab8 c144dd70 00000000 00000000 eb5e1af8 c10af89a c1d23de4 eb5e1af8 00000009 eb5d8600 eb5d8638 eb5e1af8 c10b14d8 00000009 0000000a c1d32911 00000000 00000000 e44c826c eb5d8000 eb5e1b74 c10b214e Call Trace: [<c144dd70>] dump_stack+0x5f/0x8f [<c10af89a>] register_lock_class+0x25a/0x4c0 [<c10b14d8>] ? check_irq_usage+0x88/0xc0 [<c10b214e>] __lock_acquire+0x5e/0x17a0 [<c1abdb9b>] ? _raw_spin_unlock_irqrestore+0x3b/0x70 [<c10cf14a>] ? rcu_read_lock_sched_held+0x8a/0x90 [<c10b3c5f>] lock_acquire+0x9f/0x1f0 [<c1922dcf>] ? dev_get_stats+0x5f/0x110 [<c176e6b3>] ixgbe_get_stats64+0x113/0x320 [<c1922dcf>] ? dev_get_stats+0x5f/0x110 [<c1922dcf>] dev_get_stats+0x5f/0x110 [<c1ab5415>] rtnl_fill_stats+0x40/0x105 [<c193dd45>] rtnl_fill_ifinfo+0x4c5/0xd20 [<c11c5115>] ? __kmalloc_node_track_caller+0x1a5/0x410 [<c1917487>] ? __kmalloc_reserve.isra.42+0x27/0x80 [<c191754f>] ? __alloc_skb+0x6f/0x270 [<c1942291>] rtmsg_ifinfo_build_skb+0x71/0xd0 [<c194230a>] rtmsg_ifinfo.part.23+0x1a/0x50 [<c1923dad>] ? call_netdevice_notifiers_info+0x2d/0x60 [<c194236b>] rtmsg_ifinfo+0x2b/0x40 [<c192f997>] register_netdevice+0x3d7/0x4d0 [<c192faa7>] register_netdev+0x17/0x30 [<c177b83d>] ixgbe_probe+0x118d/0x1610 [<c1498202>] local_pci_probe+0x32/0x80 [<c1498172>] ? pci_match_device+0xd2/0x100 [<c14991e0>] pci_device_probe+0xc0/0x110 [<c1652cc5>] driver_probe_device+0x1c5/0x280 [<c1498172>] ? pci_match_device+0xd2/0x100 [<c1652e09>] __driver_attach+0x89/0x90 [<c1652d80>] ? driver_probe_device+0x280/0x280 [<c165114f>] bus_for_each_dev+0x4f/0x80 [<c165269e>] driver_attach+0x1e/0x20 [<c1652d80>] ? driver_probe_device+0x280/0x280 [<c1652317>] bus_add_driver+0x1a7/0x220 [<c1653a79>] driver_register+0x59/0xe0 [<c1f897b8>] ? igb_init_module+0x49/0x49 [<c1497b2a>] __pci_register_driver+0x4a/0x50 [<c1f8985d>] ixgbe_init_module+0xa5/0xc4 [<c1000485>] do_one_initcall+0x35/0x150 [<c107e818>] ? parameq+0x18/0x70 [<c1f395d8>] ? repair_env_string+0x12/0x51 [<c107ead0>] ? parse_args+0x260/0x3b0 [<c1074f73>] ? __usermodehelper_set_disable_depth+0x43/0x50 [<c1f39e90>] kernel_init_freeable+0x19b/0x267 [<c1f395c6>] ? set_debug_rodata+0xf/0xf [<c10b1e7b>] ? trace_hardirqs_on+0xb/0x10 [<c1abdc02>] ? _raw_spin_unlock_irq+0x32/0x50 [<c1085f0b>] ? finish_task_switch+0xab/0x1f0 [<c1085ec9>] ? finish_task_switch+0x69/0x1f0 [<c1ab6a30>] kernel_init+0x10/0x110 [<c108bd65>] ? schedule_tail+0x25/0x80 [<c1abe422>] ret_from_kernel_thread+0xe/0x24 [<c1ab6a20>] ? rest_init+0x130/0x130 This CallTrace occurred on 32-bit kernel with CONFIG_PROVE_LOCKING enabled. This happens at ixgbe driver probe hardware stage, when comes to ixgbe_get_stats64, the seqcount/seqlock still not initialize, although this was initialize in TX/RX resources setup routin, but it was too late, then lockdep give this Warning. To fix this, move the u64_stats_init function to driver probe stage, which before we get the status of seqcount and after the RX/TX ring was finished init. Signed-off-by: Liwei Song <liwei.song@windriver.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
2017-05-31ixgbe/ixgbevf: Enables TSO for MPLS encapsulated packetsScott Peterson2-4/+20
This patch advertises TSO & GSO features in netdev->mpls_features. In ixgbe(vf)_tso() where we set up segmentation offload, the IP header will be the inner network header when eth_p_mpls() indicates the Ethernet protocol is MPLS (UC or MC). Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Scott Peterson <scott.d.peterson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40e: Check for memory allocation failureChristophe Jaillet1-0/+2
If 'kzalloc' fails, a NULL pointer will be dereferenced. Return -ENOMEM instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40e: check for Tx timestamp timeouts during watchdogJacob Keller4-0/+34
The i40e driver has logic to handle only one Tx timestamp at a time, using a state bit lock to avoid multiple requests at once. It may be possible, if incredibly unlikely, that a Tx timestamp event is requested but never completes. Since we use an interrupt scheme to determine when the Tx timestamp occurred we would never clear the state bit in this case. Add an i40e_ptp_tx_hang() function similar to the already existing i40e_ptp_rx_hang() function. This function runs in the watchdog routine and makes sure we eventually recover from this case instead of permanently disabling Tx timestamps. Note: there is no currently known way to cause this without hacking the driver code to force it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40e: use pf data structure directly in i40e_ptp_rx_hangJacob Keller3-4/+4
There's no reason to pass a *vsi pointer if we already have the *pf pointer in the only location where we call this function. Lets update the signature and directly pass the *pf data structure pointer. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40e: add statistic indicating number of skipped Tx timestampsJacob Keller3-0/+3
The i40e driver can only handle one Tx timestamp request at a time. This means it is possible for an application timestamp request to be ignored. There is no easy way for an administrator to determine if this occurred. Add a new statistic which tracks this, tx_hwtstamp_skipped. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40e: avoid permanent lock of *_PTP_TX_IN_PROGRESSJacob Keller1-6/+20
The i40e driver uses a bit lock to indicate when a Tx timestamp is in progress to avoid attempting to timestamp multiple packets at once. This is required because hardware only has registers to handle one request at a time. There is a corner case where we failed to cleanup the bit lock after a failed transmit. This can potentially result in a state bit being locked forever. Add some cleanup code to i40e_xmit_frame_ring to check and make sure we cleanup incase of these failures. We also modify i40e_tx_map to return an error code indication DMA failure. Reported-by: Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40e: fix race condition with PTP_TX_IN_PROGRESS bitsJacob Keller1-3/+11
Hardware related to the i40e driver has a limitation on Tx PTP packets. This requires us to limit the driver to timestamping a single packet at once. This is done using a state bitlock which enforces that only one timestamp request is honored at a time. Unfortunately this suffers from a race condition. The bit lock is not cleared until after skb_tstamp_tx() is called notifying applications of a new Tx timestamp. Even a well behaved application sending only one packet at a time and waiting for a response can wake up and send a new timestamped packet request before the bit lock is cleared. This results in needlessly dropping some Tx timestamp requests. We can fix this by unlocking the state bit as soon as we read the Timestamp register, as this is the first point at which it is safe to timestamp another packet. To avoid issues with the skb pointer, we'll use a copy of the pointer and set the global variable in the driver structure to NULL first. This ensures that the next timestamp request does not modify our local copy of the skb pointer. Now, a well behaved application which has at most one outstanding timestamp request will not accidentally race with the driver unlock bit. Obviously an application attempting to timestamp faster than one request at a time will have some timestamp requests skipped. Unfortunately there is nothing we can do about that. Reported-by: David Mirabito <davidm@metamako.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40evf: disable unused flagsJesse Brandeburg2-4/+2
The i40evf hardware doesn't have any way to ever report FCoE enabled so just force the code to always report FCoE is disabled, remove the unused defines, and mark the OP as reserved. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40evf: fix merge error in older patchJesse Brandeburg1-0/+1
This patch fixes a missing line that was missed while merging, which results in a driver feature in the VF not working to enable RSS as a negotiated feature. Fixes: 43a3d9ba34c9c ("i40evf: Allow PF driver to configure RSS") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31i40evf: fix duplicate linesJesse Brandeburg1-2/+0
This removes two duplicate lines that snuck into the code somehow. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-30bnxt_en: Fix xmit_more with BQL.Michael Chan1-1/+1
We need to write the doorbell if BQL has stopped the queue and skb->xmit_more is set. Otherwise it is possible for the tx queue to rot and cause tx timeout. Fixes: 4d172f21cefe ("bnxt_en: Implement xmit_more.") Suggested-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30Merge branch 'bnxt_en-Misc-updates-for-net-next'David S. Miller6-33/+149
Michael Chan says: ==================== bnxt_en: Misc. updates for net-next. The 1st 2 patches add short firmware message support for new VF devices. The 3rd patch adds a pci shutdown callback for the RDMA driver for proper shutdown. The next 3 patches improve the doorbell operations by elimiating the double doorbell workaround on newer chips, and by adding xmit_more support. The last patch adds a parameter to bnxt_set_dflt_rings(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Pass in sh parameter to bnxt_set_dflt_rings().Michael Chan1-3/+2
In the existing code, the local variable sh is hardcoded to true to calculate default rings for shared ring configuration. It is better to have the caller determine the value of sh. Reported-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Implement xmit_more.Michael Chan1-1/+5
Do not write the TX doorbell if skb->xmit_more is set unless the TX queue is full. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Optimize doorbell write operations for newer chips.Michael Chan4-21/+23
Older chips require the doorbells to be written twice, but newer chips do not. Add a new common function bnxt_db_write() to write all doorbells appropriately depending on the chip. Eliminating the extra doorbell on newer chips has a significant performance improvement on pktgen. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Add additional chip ID definitions.Michael Chan2-8/+27
Add additional chip definitions and macros for all supported chips. Add a new macro BNXT_CHIP_P4_PLUS for the newer generation of chips and use the macro to properly determine the features supported by these newer chips. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.Michael Chan3-0/+22
When bnxt_en gets a PCI shutdown call, we need to have a new callback to inform the RDMA driver to do proper shutdown and removal. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Add PCI IDs for BCM57454 VF devices.Deepak Khungar1-0/+2
Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30bnxt_en: Support for Short Firmware MessageDeepak Khungar2-1/+69
The new short message format is used on the new BCM57454 VFs. Each firmware message is a fixed 16-byte message sent using the standard firmware communication channel. The short message has a DMA address pointing to the legacy long firmware message. Signed-off-by: Deepak Khungar <deepak.khungar@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30net: dsa: b53: remove unused dev argumentVivien Didelot1-5/+3
The port net device passed to b53_fdb_copy is not used. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30net: dsa: remove dsa_port_is_bridgedVivien Didelot1-9/+4
The helper is only used once and makes the code more complicated that it should. Remove it and reorganize the variables so that it fits on 80 columns. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30cxgb4: Fix netdev_features flagArjun Vynipadath1-0/+11
GRO is not supported by Chelsio HW when rx_csum is disabled. Update the netdev features flag when rx_csum is modified. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30cxgb4: FW upgrade fixesArjun Vynipadath1-3/+18
Disable FW_OK flag while flashing Firmware. This will help to fix any potential mailbox timeouts during Firmware flash. Grab new devlog parameters after Firmware restart. When we FLASH new Firmware onto an adapter, the new Firmware may have the Firmware Device Log located at a different memory address or have a different size for it. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.