| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is one error handling path that does not free ref, which may cause
a minor memory leak.
CC: [email protected] # 4.19+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Dinghao Liu <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
If there is a device BTRFS_DEV_REPLACE_DEVID without the device replace
item, then it means the filesystem is inconsistent state. This is either
corruption or a crafted image. Fail the mount as this needs a closer
look what is actually wrong.
As of now if BTRFS_DEV_REPLACE_DEVID is present without the replace
item, in __btrfs_free_extra_devids() we determine that there is an
extra device, and free those extra devices but continue to mount the
device.
However, we were wrong in keeping tack of the rw_devices so the syzbot
testcase failed:
WARNING: CPU: 1 PID: 3612 at fs/btrfs/volumes.c:1166 close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 3612 Comm: syz-executor.2 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x198/0x1fd lib/dump_stack.c:118
panic+0x347/0x7c0 kernel/panic.c:231
__warn.cold+0x20/0x46 kernel/panic.c:600
report_bug+0x1bd/0x210 lib/bug.c:198
handle_bug+0x38/0x90 arch/x86/kernel/traps.c:234
exc_invalid_op+0x14/0x40 arch/x86/kernel/traps.c:254
asm_exc_invalid_op+0x12/0x20 arch/x86/include/asm/idtentry.h:536
RIP: 0010:close_fs_devices.part.0+0x607/0x800 fs/btrfs/volumes.c:1166
RSP: 0018:ffffc900091777e0 EFLAGS: 00010246
RAX: 0000000000040000 RBX: ffffffffffffffff RCX: ffffc9000c8b7000
RDX: 0000000000040000 RSI: ffffffff83097f47 RDI: 0000000000000007
RBP: dffffc0000000000 R08: 0000000000000001 R09: ffff8880988a187f
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88809593a130
R13: ffff88809593a1ec R14: ffff8880988a1908 R15: ffff88809593a050
close_fs_devices fs/btrfs/volumes.c:1193 [inline]
btrfs_close_devices+0x95/0x1f0 fs/btrfs/volumes.c:1179
open_ctree+0x4984/0x4a2d fs/btrfs/disk-io.c:3434
btrfs_fill_super fs/btrfs/super.c:1316 [inline]
btrfs_mount_root.cold+0x14/0x165 fs/btrfs/super.c:1672
The fix here is, when we determine that there isn't a replace item
then fail the mount if there is a replace target device (devid 0).
CC: [email protected] # 4.19+
Reported-by: [email protected]
Signed-off-by: Anand Jain <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Based on user feedback update the message printed when scrub fails to
start due to write requirements. To make a distinction add a device id
to the messages.
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Smatch complains that this code dereferences "entry" before checking
whether it's NULL on the next line. Fortunately, rb_entry() will never
return NULL so it doesn't cause a problem. We can clean up the NULL
checking a bit to silence the warning and make the code more clear.
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
The minimum reserve size was adjusted to take into account the height of
the tree we are merging, however we can have a root with a level == 0.
What we want is root_level + 1 to get the number of nodes we may have to
cow. This fixes the enospc_debug warning pops with btrfs/101.
Nikolay: this fixes failures on btrfs/060 btrfs/062 btrfs/063 and
btrfs/195 That I was seeing, the call trace was:
[ 3680.515564] ------------[ cut here ]------------
[ 3680.515566] BTRFS: block rsv returned -28
[ 3680.515585] WARNING: CPU: 2 PID: 8339 at fs/btrfs/block-rsv.c:521 btrfs_use_block_rsv+0x162/0x180
[ 3680.515587] Modules linked in:
[ 3680.515591] CPU: 2 PID: 8339 Comm: btrfs Tainted: G W 5.9.0-rc8-default #95
[ 3680.515593] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
[ 3680.515595] RIP: 0010:btrfs_use_block_rsv+0x162/0x180
[ 3680.515600] RSP: 0018:ffffa01ac9753910 EFLAGS: 00010282
[ 3680.515602] RAX: 0000000000000000 RBX: ffff984b34200000 RCX: 0000000000000027
[ 3680.515604] RDX: 0000000000000027 RSI: 0000000000000000 RDI: ffff984b3bd19e28
[ 3680.515606] RBP: 0000000000004000 R08: ffff984b3bd19e20 R09: 0000000000000001
[ 3680.515608] R10: 0000000000000004 R11: 0000000000000046 R12: ffff984b264fdc00
[ 3680.515609] R13: ffff984b13149000 R14: 00000000ffffffe4 R15: ffff984b34200000
[ 3680.515613] FS: 00007f4e2912b8c0(0000) GS:ffff984b3bd00000(0000) knlGS:0000000000000000
[ 3680.515615] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3680.515617] CR2: 00007fab87122150 CR3: 0000000118e42000 CR4: 00000000000006e0
[ 3680.515620] Call Trace:
[ 3680.515627] btrfs_alloc_tree_block+0x8b/0x340
[ 3680.515633] ? __lock_acquire+0x51a/0xac0
[ 3680.515646] alloc_tree_block_no_bg_flush+0x4f/0x60
[ 3680.515651] __btrfs_cow_block+0x14e/0x7e0
[ 3680.515662] btrfs_cow_block+0x144/0x2c0
[ 3680.515670] merge_reloc_root+0x4d4/0x610
[ 3680.515675] ? btrfs_lookup_fs_root+0x78/0x90
[ 3680.515686] merge_reloc_roots+0xee/0x280
[ 3680.515695] relocate_block_group+0x2ce/0x5e0
[ 3680.515704] btrfs_relocate_block_group+0x16e/0x310
[ 3680.515711] btrfs_relocate_chunk+0x38/0xf0
[ 3680.515716] btrfs_shrink_device+0x200/0x560
[ 3680.515728] btrfs_rm_device+0x1ae/0x6a6
[ 3680.515744] ? _copy_from_user+0x6e/0xb0
[ 3680.515750] btrfs_ioctl+0x1afe/0x28c0
[ 3680.515755] ? find_held_lock+0x2b/0x80
[ 3680.515760] ? do_user_addr_fault+0x1f8/0x418
[ 3680.515773] ? __x64_sys_ioctl+0x77/0xb0
[ 3680.515775] __x64_sys_ioctl+0x77/0xb0
[ 3680.515781] do_syscall_64+0x31/0x70
[ 3680.515785] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: Nikolay Borisov <[email protected]>
Fixes: 44d354abf33e ("btrfs: relocation: review the call sites which can be interrupted by signal")
CC: [email protected] # 5.4+
Reviewed-by: Nikolay Borisov <[email protected]>
Tested-by: Nikolay Borisov <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
To help with debugging, print the type of the block rsv when we fail to
use our target block rsv in btrfs_use_block_rsv.
This now produces:
[ 544.672035] BTRFS: block rsv 1 returned -28
which is still cryptic without consulting the enum in block-rsv.h but I
guess it's better than nothing.
Reviewed-by: Nikolay Borisov <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
[ add note from Nikolay ]
Signed-off-by: David Sterba <[email protected]>
|
|
On 32-bit systems, this shift will overflow for files larger than 4GB as
start_index is unsigned long while the calls to btrfs_delalloc_*_space
expect u64.
CC: [email protected] # 4.4+
Fixes: df480633b891 ("btrfs: extent-tree: Switch to new delalloc space reserve and release")
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Matthew Wilcox (Oracle) <[email protected]>
Reviewed-by: David Sterba <[email protected]>
[ define the variable instead of repeating the shift ]
Signed-off-by: David Sterba <[email protected]>
|
|
Only USB4 lane 0 adapter has the USB4 port capability for wakes so only
program wakes on such adapters.
Fixes: b2911a593a70 ("thunderbolt: Enable wakes from system suspend")
Signed-off-by: Mika Westerberg <[email protected]>
|
|
Some calls in the debugfs interface are made to the linux/uaccess.h header,
but the header is not referenced. So, for x86_64 architectures, this
dependency seems to be pulled in elsewhere, which leads to a successful
compilation. However, on arm/arm64 architectures, it was found to error out
on implicit declarations.
This change fixes the implicit declaration error by adding the
linux/uaccess.h header.
Fixes: 54e418106c76 ("thunderbolt: Add debugfs interface")
Signed-off-by: Casey Bowman <[email protected]>
Signed-off-by: Mika Westerberg <[email protected]>
|
|
The svc->key field is not released as it should be if ida_simple_get()
fails so fix that.
Fixes: 9aabb68568b4 ("thunderbolt: Fix to check return value of ida_simple_get")
Cc: [email protected]
Signed-off-by: Mika Westerberg <[email protected]>
|
|
It is useful for debugging to have the error message printed
when regmap initialisation fails. Add it to the driver.
Signed-off-by: Andy Shevchenko <[email protected]>
Cc: Martin Hundebøll <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Jan Kundrát <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
It appears that simplification of mcp23s08_spi_regmap_init() made
a regression due to wrong size calculation for dev_kmemdup() call.
It misses the fact that config variable is already a pointer, thus
the sizeof() calculation is wrong and only 4 or 8 bytes were copied.
Fix the parameters to devm_kmemdup() to copy a full chunk of memory.
Fixes: 0874758ecb2b ("pinctrl: mcp23s08: Refactor mcp23s08_spi_regmap_init()")
Reported-by: Martin Hundebøll <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Tested-by: Martin Hundebøll <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Tested-by: Jan Kundrát <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
|
|
The mcp2221 driver GPIO output handling has has several issues.
* A wrong value is used for the GPIO direction.
* Wrong offsets are calculated for some GPIO set value/set direction
operations, when offset is larger than 0.
This has been fixed by introducing proper manifest constants for the
direction encoding, and using 'offsetof' when calculating GPIO
register offsets.
The updated driver has been tested with the Sparx5 pcb134/pcb135
board, which has the mcp2221 device with several (output) GPIO's.
Fixes: 328de1c519c5c092 ("HID: mcp2221: add GPIO functionality support")
Reviewed-by: Rishi Gupta <[email protected]>
Signed-off-by: Lars Povlsen <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
Some HID devices don't use a report ID because they only have a single
report. In those cases, the report ID in struct hid_report will be zero
and the data for the report will start at the first byte, so don't skip
over the first byte.
Signed-off-by: Pablo Ceballos <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>
|
|
This patch fixes audio distortion on playback for the Allen&Heath
Qu-16.
Signed-off-by: Geoffrey D. Bennett <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Use the uic_cmd->cmd_active as a flag to track the lifecycle of an UIC cmd.
The flag is set before sending the UIC cmd and cleared in IRQ handler. When
a PMC or UIC cmd completion timeout happens, if the flag is not set,
instead of returning timeout error, we still treat it as a successful
operation. This is to deal with the scenario in which completion has been
raised but the one waiting for the completion cannot be awaken in time due
to kernel scheduling problem.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Stanley Chu <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
The scsi_block_reqs_cnt increased in ufshcd_hold() is supposed to be
decreased back in ufshcd_ungate_work() in a paired way. However, if
specific ufshcd_hold/release sequences are met, it is possible that
scsi_block_reqs_cnt is increased twice but only one ungate work is
queued. To make sure scsi_block_reqs_cnt is handled by ufshcd_hold() and
ufshcd_ungate_work() in a paired way, increase it only if queue_work()
returns true.
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Hongwu Su <[email protected]>
Reviewed-by: Stanley Chu <[email protected]>
Reviewed-by: Bean Huo <[email protected]>
Signed-off-by: Can Guo <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
There's no reason to flush an entire file when we're unsharing part of
a file. Therefore, only initiate writeback on the selected range.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Chandan Babu R <[email protected]>
|
|
Network problems with RTL8125B have been reported [0] and with help
from Realtek it turned out that this chip version has a hw problem
with short packets (similar to RTL8168evl). Having said that activate
the same workaround as for RTL8168evl.
Realtek suggested to activate the workaround for RTL8125A too, even
though they're not 100% sure yet which RTL8125 versions are affected.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=209839
Fixes: 0439297be951 ("r8169: add support for RTL8125B")
Reported-by: Maxim Plotnikov <[email protected]>
Tested-by: Maxim Plotnikov <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
noc/axi/ahb are bus clk, not peripheral clk.
Since peripheral clk has a limitation that for peripheral clock slice,
IP clock slices must be stopped to change the clock source.
However if the bus clk is marked as critical clk peripheral, the
assigned clock parent operation will fail.
So we added CLK_SET_PARENT_GATE flag to avoid glitch.
And add imx8m_clk_hw_composite_bus_critical for bus critical clock usage
Fixes: 936c383673b9e ("clk: imx: fix composite peripheral flags")
Reviewed-by: Abel Vesa <[email protected]>
Reported-by: Abel Vesa <[email protected]>
Signed-off-by: Peng Fan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Stephen Boyd <[email protected]>
|
|
Commit f89c696e7f63 ("drm/mediatek: mtk_dpi: Convert to bridge driver")
introduced the following build warning with W=1
drivers/gpu/drm/mediatek/mtk_dpi.c:530:39: warning: unused variable 'mtk_dpi_encoder_funcs' [-Wunused-const-variable]
static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
This struct is and the 'mtk_dpi_encoder_destroy()' are not needed
anymore, so remove them.
Fixes: f89c696e7f63 ("drm/mediatek: mtk_dpi: Convert to bridge driver")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Enric Balletbo i Serra <[email protected]>
Signed-off-by: Chun-Kuang Hu <[email protected]>
|
|
Andreas reported that commit ee0a49a6870e ("powerpc/uaccess: Switch
__put_user_size_allowed() to __put_user_asm_goto()") broke
CLONE_CHILD_SETTID.
Further inspection showed that the put_user() in schedule_tail() was
missing entirely, the store not emitted by the compiler.
<.schedule_tail>:
mflr r0
std r0,16(r1)
stdu r1,-112(r1)
bl <.finish_task_switch>
ld r9,2496(r3)
cmpdi cr7,r9,0
bne cr7,<.schedule_tail+0x60>
ld r3,392(r13)
ld r9,1392(r3)
cmpdi cr7,r9,0
beq cr7,<.schedule_tail+0x3c>
li r4,0
li r5,0
bl <.__task_pid_nr_ns>
nop
bl <.calculate_sigpending>
nop
addi r1,r1,112
ld r0,16(r1)
mtlr r0
blr
nop
nop
nop
bl <.__balance_callback>
b <.schedule_tail+0x1c>
Notice there are no stores other than to the stack. There should be a
stw in there for the store to current->set_child_tid.
This is only seen with GCC 4.9 era compilers (tested with 4.9.3 and
4.9.4), and only when CONFIG_PPC_KUAP is disabled.
When CONFIG_PPC_KUAP=y, the inline asm that's part of the isync()
and mtspr() inlined via allow_user_access() seems to be enough to
avoid the bug.
We already have a macro to work around this (or a similar bug), called
asm_volatile_goto which includes an empty asm block to tickle the
compiler into generating the right code. So use that.
With this applied the code generation looks more like it will work:
<.schedule_tail>:
mflr r0
std r31,-8(r1)
std r0,16(r1)
stdu r1,-144(r1)
std r3,112(r1)
bl <._mcount>
nop
ld r3,112(r1)
bl <.finish_task_switch>
ld r9,2624(r3)
cmpdi cr7,r9,0
bne cr7,<.schedule_tail+0xa0>
ld r3,2408(r13)
ld r31,1856(r3)
cmpdi cr7,r31,0
beq cr7,<.schedule_tail+0x80>
li r4,0
li r5,0
bl <.__task_pid_nr_ns>
nop
li r9,-1
clrldi r9,r9,12
cmpld cr7,r31,r9
bgt cr7,<.schedule_tail+0x80>
lis r9,16
rldicr r9,r9,32,31
subf r9,r31,r9
cmpldi cr7,r9,3
ble cr7,<.schedule_tail+0x80>
li r9,0
stw r3,0(r31) <-- stw
nop
bl <.calculate_sigpending>
nop
addi r1,r1,144
ld r0,16(r1)
ld r31,-8(r1)
mtlr r0
blr
nop
bl <.__balance_callback>
b <.schedule_tail+0x30>
Fixes: ee0a49a6870e ("powerpc/uaccess: Switch __put_user_size_allowed() to __put_user_asm_goto()")
Reported-by: Andreas Schwab <[email protected]>
Tested-by: Andreas Schwab <[email protected]>
Suggested-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Signed-off-by: Ryan Kosta <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Fix a possible use after free in xsk_socket__delete that will happen
if xsk_put_ctx() frees the ctx. To fix, save the umem reference taken
from the context and just use that instead.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Fix a possible null pointer dereference in xsk_socket__delete that
will occur if a null pointer is fed into the function.
Fixes: 2f6324a3937f ("libbpf: Support shared umems between queues and devices")
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Add the following Telit FN980 composition:
0x1055: tty, adb, tty, tty, tty, tty
Signed-off-by: Daniele Palmas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
Some messages sent by the MDS entail a session sequence number
increment, and the MDS will drop certain types of requests on the floor
when the sequence numbers don't match.
In particular, a REQUEST_CLOSE message can cross with one of the
sequence morphing messages from the MDS which can cause the client to
stall, waiting for a response that will never come.
Originally, this meant an up to 5s delay before the recurring workqueue
job kicked in and resent the request, but a recent change made it so
that the client would never resend, causing a 60s stall unmounting and
sometimes a blockisting event.
Add a new helper for incrementing the session sequence and then testing
to see whether a REQUEST_CLOSE needs to be resent, and move the handling
of CEPH_MDS_SESSION_CLOSING into that function. Change all of the
bare sequence counter increments to use the new helper.
Reorganize check_session_state with a switch statement. It should no
longer be called when the session is CLOSING, so throw a warning if it
ever is (but still handle that case sanely).
[ idryomov: whitespace, pr_err() call fixup ]
URL: https://tracker.ceph.com/issues/47563
Fixes: fa9967734227 ("ceph: fix potential mdsc use-after-free crash")
Reported-by: Patrick Donnelly <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Reviewed-by: Ilya Dryomov <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
With commit 669cbc708122 ("PCI: Move DT resource setup into
devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated
into resources when the host bridge is allocated. The resources are
requested as well, but that happens a second time for the mvebu driver in
mvebu_pcie_parse_request_resources(). We should only be requesting the
additional resources added in mvebu_pcie_parse_request_resources(). These
are not added by default because they use custom properties rather than
standard DT address translation.
Also, the bus ranges was also populated by default, so we can remove it
from mvebu_pci_host_probe().
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729
Fixes: 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()")
Link: https://lore.kernel.org/r/[email protected]
Reported-by: [email protected]
Tested-by: Jan Kundrát <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Lorenzo Pieralisi <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Russell King <[email protected]>
|
|
Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"),
the DWC driver was setting up the last memory resource rather than the
first memory resource. This doesn't matter for most platforms which only
have 1 memory resource, but it broke Tegra194 which has a 2nd
(prefetchable) memory region that requires an ATU entry. The first region
on Tegra194 relies on the default 1:1 pass-thru of outbound transactions
and doesn't need an ATU entry.
Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Vidya Sagar <[email protected]>
Signed-off-by: Rob Herring <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Lorenzo Pieralisi <[email protected]>
Acked-by: Jingoo Han <[email protected]>
Cc: Gustavo Pimentel <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2020-11-03
The first two patches are by Oleksij Rempel and they add a generic
can-controller Device Tree yaml binding and convert the text based binding
of the flexcan driver to a yaml based binding.
Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN
core.
A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload
helper.
Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in
hard IRQ context in can_get_echo_skb().
Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames
in the __can_get_echo_skb() helper.
Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in
can_create_echo_skb().
Yegor Yefremov contributes 4 patches to enhance the j1939 documentation.
Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind()
if the netdev is down.
Then there are three patches for the newly added CAN_ISOTP protocol. Geert
Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds
missing RX timeout handling in listen-only mode and Colin Ian King's patch
decreases the generated object code by 926 bytes.
Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the
error path in the probe function.
Navid Emamdoost's patch for the xilinx_can driver fixes the error handling
in case of failing pm_runtime_get_sync().
There are two patches for the peak_usb driver. Dan Carpenter adds range
checking in decode operations and Stephane Grosjean's patch fixes
a timestamp wrapping problem.
Stephane Grosjean's patch for th peak_canfd driver fixes echo management if
loopback is on.
The next three patches all target the mcp251xfd driver. The first one is
by me and it increased the severity of CRC read error messages. The kernel
test robot removes an unneeded semicolon and Tom Rix removes unneeded
break in several switch-cases.
The last 4 patches are by Joakim Zhang and target the flexcan driver,
the first three fix ECC related device specific quirks for the LS1021A,
LX2160A and the VF610 SoC. The last patch disable wakeup completely upon
driver remove.
* tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits)
can: flexcan: flexcan_remove(): disable wakeup completely
can: flexcan: add ECC initialization for VF610
can: flexcan: add ECC initialization for LX2160A
can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A
can: mcp251xfd: remove unneeded break
can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings
can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages
can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on
can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping
can: peak_usb: add range checking in decode operations
can: xilinx_can: handle failure cases of pm_runtime_get_sync
can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path
can: isotp: padlen(): make const array static, makes object smaller
can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode
can: isotp: Explain PDU in CAN_ISOTP help text
can: j1939: j1939_sk_bind(): return failure if netdev is down
can: j1939: use backquotes for code samples
can: j1939: swap addr and pgn in the send example
can: j1939: fix syntax and spelling
can: j1939: rename jacd tool
...
====================
Link: https://lore.kernel.org/r/<[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in
remove path"), this driver causes a "NULL pointer dereference"
in dspi_suspend/resume.
This is because since this commit, the drivers private data point to
"dspi" instead of "ctlr", the codes in suspend and resume func were
not modified correspondly.
Fixes: 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path")
Signed-off-by: Zhao Qiang <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The Validity bits (bit 28) must not be set in order to have the samples
valid. Some controllers look for this bit and ignore the samples if it
is set.
Fixes: 06ca24e98e6b ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller")
Signed-off-by: Codrin Ciubotariu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Current io_match_files() check in io_cqring_overflow_flush() is useless
because requests drop ->files before going to the overflow list, however
linked to it request do not, and we don't check them.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We can't bundle this into one operation, as the identity may not have
originated from the tctx to begin with. Drop one ref for each of them
separately, if they don't match the static assignment. If we don't, then
if the identity is a lookup from registered credentials, we could be
freeing that identity as we're dropping a reference assuming it came from
the tctx. syzbot reports this as a use-after-free, as the identity is
still referencable from idr lookup:
==================================================================
BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
BUG: KASAN: use-after-free in atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline]
BUG: KASAN: use-after-free in __refcount_add include/linux/refcount.h:193 [inline]
BUG: KASAN: use-after-free in __refcount_inc include/linux/refcount.h:250 [inline]
BUG: KASAN: use-after-free in refcount_inc include/linux/refcount.h:267 [inline]
BUG: KASAN: use-after-free in io_init_req fs/io_uring.c:6700 [inline]
BUG: KASAN: use-after-free in io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774
Write of size 4 at addr ffff888011e08e48 by task syz-executor165/8487
CPU: 1 PID: 8487 Comm: syz-executor165 Not tainted 5.10.0-rc1-next-20201102-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
check_memory_region_inline mm/kasan/generic.c:186 [inline]
check_memory_region+0x13d/0x180 mm/kasan/generic.c:192
instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline]
__refcount_add include/linux/refcount.h:193 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
io_init_req fs/io_uring.c:6700 [inline]
io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774
__do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x440e19
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 0f fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fff644ff178 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000440e19
RDX: 0000000000000000 RSI: 000000000000450c RDI: 0000000000000003
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000022b4850
R13: 0000000000000010 R14: 0000000000000000 R15: 0000000000000000
Allocated by task 8487:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:461
kmalloc include/linux/slab.h:552 [inline]
io_register_personality fs/io_uring.c:9638 [inline]
__io_uring_register fs/io_uring.c:9874 [inline]
__do_sys_io_uring_register+0x10f0/0x40a0 fs/io_uring.c:9924
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Freed by task 8487:
kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48
kasan_set_track+0x1c/0x30 mm/kasan/common.c:56
kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355
__kasan_slab_free+0x102/0x140 mm/kasan/common.c:422
slab_free_hook mm/slub.c:1544 [inline]
slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1577
slab_free mm/slub.c:3140 [inline]
kfree+0xdb/0x360 mm/slub.c:4122
io_identity_cow fs/io_uring.c:1380 [inline]
io_prep_async_work+0x903/0xbc0 fs/io_uring.c:1492
io_prep_async_link fs/io_uring.c:1505 [inline]
io_req_defer fs/io_uring.c:5999 [inline]
io_queue_sqe+0x212/0xed0 fs/io_uring.c:6448
io_submit_sqe fs/io_uring.c:6542 [inline]
io_submit_sqes+0x14f6/0x25f0 fs/io_uring.c:6784
__do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The buggy address belongs to the object at ffff888011e08e00
which belongs to the cache kmalloc-96 of size 96
The buggy address is located 72 bytes inside of
96-byte region [ffff888011e08e00, ffff888011e08e60)
The buggy address belongs to the page:
page:00000000a7104751 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e08
flags: 0xfff00000000200(slab)
raw: 00fff00000000200 ffffea00004f8540 0000001f00000002 ffff888010041780
raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888011e08d00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888011e08d80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
> ffff888011e08e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
^
ffff888011e08e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
ffff888011e08f00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
==================================================================
Reported-by: [email protected]
Fixes: 1e6fa5216a0e ("io_uring: COW io_identity on mismatch")
Signed-off-by: Jens Axboe <[email protected]>
|
|
Ensure we get a valid view of the task mm, by using task_lock() when
attempting to grab the original task mm.
Reported-by: [email protected]
Fixes: 2aede0e417db ("io_uring: stash ctx task reference for SQPOLL")
Signed-off-by: Jens Axboe <[email protected]>
|
|
Track if a given task io_uring context contains SQPOLL instances, so we
can iterate those for cancelation (and request counts). This ensures that
we properly wait on SQPOLL contexts, and find everything that needs
canceling.
Signed-off-by: Jens Axboe <[email protected]>
|
|
This can't currently happen, but will be possible shortly. Handle missing
files just like we do not being able to grab a needed mm, and mark the
request as needing cancelation.
Signed-off-by: Jens Axboe <[email protected]>
|
|
When an exception/interrupt hits kernel space and the kernel is not
currently in the idle task then RCU must be watching.
irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in
turn invokes lockdep when taking a lock. But at that point lockdep does not
yet know about the fact that interrupts have been disabled by the CPU,
which triggers a lockdep splat complaining about inconsistent state.
Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the
point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU.
So use the same sequence as for the idle case and tell lockdep about the
irq state change first, invoke the RCU check and then do the lockdep and
tracer update.
Fixes: a5497bab5f72 ("entry: Provide generic interrupt entry/exit code")
Reported-by: Mark Rutland <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Mark Rutland <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
The kernel has always allowed directories to have the rtinherit flag
set, even if there is no rt device, so this check is wrong.
Fixes: 80e4e1268802 ("xfs: scrub inodes")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
In commit 7588cbeec6df, we tried to fix a race stemming from the lack of
coordination between higher level code that wants to allocate and remap
CoW fork extents into the data fork. Christoph cites as examples the
always_cow mode, and a directio write completion racing with writeback.
According to the comments before the goto retry, we want to restart the
lookup to catch the extent in the data fork, but we don't actually reset
whichfork or cow_fsb, which means the second try executes using stale
information. Up until now I think we've gotten lucky that either
there's something left in the CoW fork to cause cow_fsb to be reset, or
either data/cow fork sequence numbers have advanced enough to force a
fresh lookup from the data fork. However, if we reach the retry with an
empty stable CoW fork and a stable data fork, neither of those things
happens. The retry foolishly re-calls xfs_convert_blocks on the CoW
fork which fails again. This time, we toss the write.
I've recently been working on extending reflink to the realtime device.
When the realtime extent size is larger than a single block, we have to
force the page cache to CoW the entire rt extent if a write (or
fallocate) are not aligned with the rt extent size. The strategy I've
chosen to deal with this is derived from Dave's blocksize > pagesize
series: dirtying around the write range, and ensuring that writeback
always starts mapping on an rt extent boundary. This has brought this
race front and center, since generic/522 blows up immediately.
However, I'm pretty sure this is a bug outright, independent of that.
Fixes: 7588cbeec6df ("xfs: retry COW fork delalloc conversion when no extent was found")
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
The iomap writepage error handling logic is a mash of old and
slightly broken XFS writepage logic. When keepwrite writeback state
tracking was introduced in XFS in commit 0d085a529b42 ("xfs: ensure
WB_SYNC_ALL writeback handles partial pages correctly"), XFS had an
additional cluster writeback context that scanned ahead of
->writepage() to process dirty pages over the current ->writepage()
extent mapping. This context expected a dirty page and required
retention of the TOWRITE tag on partial page processing so the
higher level writeback context would revisit the page (in contrast
to ->writepage(), which passes a page with the dirty bit already
cleared).
The cluster writeback mechanism was eventually removed and some of
the error handling logic folded into the primary writeback path in
commit 150d5be09ce4 ("xfs: remove xfs_cancel_ioend"). This patch
accidentally conflated the two contexts by using the keepwrite logic
in ->writepage() without accounting for the fact that the page is
not dirty. Further, the keepwrite logic has no practical effect on
the core ->writepage() caller (write_cache_pages()) because it never
revisits a page in the current function invocation.
Technically, the page should be redirtied for the keepwrite logic to
have any effect. Otherwise, write_cache_pages() may find the tagged
page but will skip it since it is clean. Even if the page was
redirtied, however, there is still no practical effect to keepwrite
since write_cache_pages() does not wrap around within a single
invocation of the function. Therefore, the dirty page would simply
end up retagged on the next writeback sequence over the associated
range.
All that being said, none of this really matters because redirtying
a partially processed page introduces a potential infinite redirty
-> writeback failure loop that deviates from the current design
principle of clearing the dirty state on writepage failure to avoid
building up too much dirty, unreclaimable memory on the system.
Therefore, drop the spurious keepwrite usage and dirty state
clearing logic from iomap_writepage_map(), treat the partially
processed page the same as a fully processed page, and let the
imminent ioend failure clean up the writeback state.
Signed-off-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
iomap writeback mapping failure only calls into ->discard_page() if
the current page has not been added to the ioend. Accordingly, the
XFS callback assumes a full page discard and invalidation. This is
problematic for sub-page block size filesystems where some portion
of a page might have been mapped successfully before a failure to
map a delalloc block occurs. ->discard_page() is not called in that
error scenario and the bio is explicitly failed by iomap via the
error return from ->prepare_ioend(). As a result, the filesystem
leaks delalloc blocks and corrupts the filesystem block counters.
Since XFS is the only user of ->discard_page(), tweak the semantics
to invoke the callback unconditionally on mapping errors and provide
the file offset that failed to map. Update xfs_discard_page() to
discard the corresponding portion of the file and pass the range
along to iomap_invalidatepage(). The latter already properly handles
both full and sub-page scenarios by not changing any iomap or page
state on sub-page invalidations.
Signed-off-by: Brian Foster <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
It is possible to expose non-zeroed post-EOF data in XFS if the new
EOF page is dirty, backed by an unwritten block and the truncate
happens to race with writeback. iomap_truncate_page() will not zero
the post-EOF portion of the page if the underlying block is
unwritten. The subsequent call to truncate_setsize() will, but
doesn't dirty the page. Therefore, if writeback happens to complete
after iomap_truncate_page() (so it still sees the unwritten block)
but before truncate_setsize(), the cached page becomes inconsistent
with the on-disk block. A mapped read after the associated page is
reclaimed or invalidated exposes non-zero post-EOF data.
For example, consider the following sequence when run on a kernel
modified to explicitly flush the new EOF page within the race
window:
$ xfs_io -fc "falloc 0 4k" -c fsync /mnt/file
$ xfs_io -c "pwrite 0 4k" -c "truncate 1k" /mnt/file
...
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400: 00 00 00 00 00 00 00 00 ........
$ umount /mnt/; mount <dev> /mnt/
$ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file
00000400: cd cd cd cd cd cd cd cd ........
Update xfs_setattr_size() to explicitly flush the new EOF page prior
to the page truncate to ensure iomap has the latest state of the
underlying block.
Fixes: 68a9f5e7007c ("xfs: implement iomap based buffered write path")
Signed-off-by: Brian Foster <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
1) Fix packet receiving of standard IP tunnels when the xfrm_interface
module is installed. From Xin Long.
2) Fix a race condition between spi allocating and hash list
resizing. From zhuoliang zhang.
====================
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since the kprobe handlers have protection that prohibits other handlers from
executing in other contexts (like if an NMI comes in while processing a
kprobe, and executes the same kprobe, it will get fail with a "busy"
return). Lockdep is unaware of this protection. Use lockdep's nesting api to
differentiate between locks taken in INT3 context and other context to
suppress the false warnings.
Link: https://lore.kernel.org/r/[email protected]
Cc: Peter Zijlstra <[email protected]>
Acked-by: Masami Hiramatsu <[email protected]>
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
Remove totally irq mappings create in probe, the gpio irq mapping will
be created when do
gpio_to_irq ->
rockchip_gpio_to_irq ->
irq_create_mapping
This patch can speed up system boot on, also abandon many unused irq
mappings' create.
Signed-off-by: Jianqun Xu <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Reviewed-by: Kever Yang<[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
There need to enable pclk_gpio when do irq_create_mapping, since it will
do access to gpio controller.
Signed-off-by: Jianqun Xu <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Reviewed-by: Kever Yang<[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Linus Walleij <[email protected]>
|
|
This patch fixes audio distortion on playback for the Yamaha MODX.
Signed-off-by: Geoffrey D. Bennett <[email protected]>
Tested-by: Frank Slotta <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Khadas audio devices ( USB_ID_VENDOR 0x3353 )
have DSD-capable implementations from XMOS
need add new usb vendor id for recognition
Signed-off-by: Artem Lapkin <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
No need for a separate config option at this point.
Reviewed-by: Luben Tuikov <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|