aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-02-20Merge tag 'arm-dt-v5.12' of ↵Linus Torvalds569-4410/+31065
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC devicetree updates from Arnd Bergmann: "After the last release contained a surprising amount of new 32-bit machines, this time two thirds of the code changes are for 64-bit. The usual updates to existing files include: - Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA, nomadik, stm32, Allwinner, TI Keystone - Support for additional devices on existing machines on Renesas, SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom, ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic, Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba - Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung, stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm, i.MX, Rockchip, ASpeed, Zynq Only three new SoCs this time, but a number of boards across: Renesas: - Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based) Intel SoCFPGA: - eASIC N5X board (N5X) ST-Ericsson Ux500: - Samsung GT-I9070 (Janice) phone (u8500) TI OMAP: - MYIR Tech Limited development board (AM335X) Allwinner/sunxi: - SL631 Action Camera (V3) - PineTab Early Adopter tablet (A64) Broadcom: - BCM4906 networking chip - Netgear R8000P router (BCM4906) AMLogic: - Hardkernel ODROID-HC4 development board (SM1) - Beelink GS-King-X TV Box (S922X) Qualcomm: - Snapdragon 888 / SM8350 high-end phone SoC - Qualcomm SDX55 5G modem as standalone SoC - Snapdragon MTP reference board (SM8350) - Snapdragon MTP reference board (SDX55) - Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094) - Alcatel Idol 3 phone (MSM8916) - ASUS Zenfone 2 Laser phone (MSM8916) - BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916) - OnePlus6 phone (SDM845) - OnePlus6T phone (SDM845) - Alfa Network AP120C-AC access point (IPQ4018) NXP i.MX6 (32-bit): - Plymovent BAS base system controller for filter systems (imx6dl) - Protonic MVT industrial touchscreen terminals (imx6dl) - Protonic PRTI6G reference board (imx6ul) - Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp) NXP i.MX8 (64-bit) - Beacon i.MX8M Nano development kit (imx8mn) - Boundary Devices i.MX8MM Nitrogen SBC (imx8mm) - Gateworks Venice i.MX 8M Mini Development Kits (imx8mm) - phyBOARD-Pollux-i.MX8MP (imx8mp) - Purism Librem5 Evergreen phone (imx8mp) - Kontron SMARC-sAL28 system-on-module(imx8mp) Rockchip: - NanoPi M4B Single-board computer (RK3399) - Radxa Rock Pi E router SBC (RK3328) ASpeed: - Ampere Mt. Jade, a BMC for an x86 server (AST2500) - IBM Everest, a BMC for a Power10 server (AST2600) - Supermicro x11spi, a BMC for an ARM server (AST2500) Zynq: - Ebang EBAZ4205, FPGA board (Zynq-7000) - ZynqMP zcu104 revC reference platform (ZynqMP)" * tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits) ARM: dts: aspeed: align GPIO hog names with dtschema ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci ARM: dts: aspeed: mowgli: Add i2c rtc device ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address dt-bindings: arm: xilinx: Add missing Zturn boards ARM: dts: ebaz4205: add pinctrl entries for switches ARM: dts: add Ebang EBAZ4205 device tree dt-bindings: arm: add Ebang EBAZ4205 board dt-bindings: add ebang vendor prefix ARM: dts: aspeed: Add Everest BMC machine ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names ARM: dts: aspeed: Add Supermicro x11spi BMC machine ARM: dts: aspeed: g220a: Fix some gpio ARM: dts: aspeed: g220a: Enable ipmb ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ARM: dts: aspeed: Add LCLK to lpc-snoop ...
2021-02-20Merge tag 'arm-defconfig-v5.12' of ↵Linus Torvalds9-38/+88
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC defconfig updates from Arnd Bergmann: "As usual, a number of additional device drivers that were added to the kernel are now enabled in the respective configuration files. A few of the files get updated to match the current Kconfig files for removed or renamed options" * tag 'arm-defconfig-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits) ARM: configs: sama5_defconfig: add QSPI driver ARM: configs: at91_dt_defconfig: add ov7740 module ARM: configs: at91_dt_defconfig: add useful helper options ARM: configs: at91: DT/ATAG defconfig modifications ARM: configs: sama5_defconfig: update and remove unneeded options ARM: configs: at91: enable drivers for sam9x60 arm64: defconfig: Enable RT5659 arm64: configs: Support DEVAPC on MediaTek platforms arm64: configs: Support pwrap on Mediatek MT6779 platform arm64: defconfig: Enable PF8x00 as builtin ARM: multi_v7_defconfig: add STM32 CEC support arm64: defconfig: Enable vibra-pwm ARM: omap2plus_defconfig: Update for dropped options ARM: omap2plus_defconfig: Update for moved options ARM: multi_v7_defconfig: Enable nvmem's rmem driver arm64: defconfig: Enable nvmem's rmem driver ARM: multi_v7_defconfig: Enable support for the ADC thermal sensor ARM: qcom_defconfig: Enable Command DB driver ARM: qcom_defconfig: Enable RPMh power domain driver ARM: qcom_defconfig: Enable ARM PSCI support ...
2021-02-20Merge tag 'arm-soc-v5.12' of ↵Linus Torvalds19-213/+286
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC updates from Arnd Bergmann: "This is mostly 32-bit code for SoC platforms, and looks smaller than any such branch I remember from previous kernels, as most of this is now handled in other subsystems for modern platforms: - Minor bugfixes and Kconfig updates for Tegra, Broadcom, i.MX, Renesas, and Samsung - Updates to the MAINTAINERS listing for Actions, OMAP, and Samsung - Samsung SoC driver updates to make them loadable modules" * tag 'arm-soc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: MAINTAINERS: arm: samsung: include S3C headers in platform entry MAINTAINERS: Add linux-actions ML for Actions Semi Arch ARM: s3c: irq-s3c24xx: staticize local functions ARM: s3c: irq-s3c24xx: include headers for missing declarations ARM: s3c: fix fiq for clang IAS ARM: imx: Remove unused IMX_GPIO_NR() macro soc: renesas: rcar-sysc: Mark device node OF_POPULATED after init ARM: OMAP2+: fix spellint typo MAINTAINERS: Update address for OMAP GPMC driver soc: renesas: rcar-sysc: Use readl_poll_timeout_atomic() ARM: bcm: Select BRCMSTB_L2_IRQ for bcm2835 ARM: brcmstb: Add debug UART entry for 72116 ARM: tegra: Don't enable unused PLLs on resume from suspend soc: samsung: pm_domains: Convert to regular platform driver soc: samsung: exynos-chipid: correct helpers __init annotation ARM: mach-imx: imx6ul: Print SOC revision on boot ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup soc: samsung: exynos-chipid: convert to driver and merge exynos-asv soc: samsung: exynos-asv: handle reading revision register error soc: samsung: exynos-asv: don't defer early on not-supported SoCs
2021-02-20Merge tag 'arm-platform-removal-v5.12' of ↵Linus Torvalds221-21464/+11
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC platform removals from Arnd Bergmann: "There are a lot of platforms that have not seen any interesting code changes in the past five years or more. I made a list and asked around which ones are no longer in use, and received confirmation about six ARM platforms and the TI C6x architecture that have all reached the end of their life upstream, with no known users remaining: - efm32 - added in 2011, first Cortex-M, no notable changes after 2013 - picoxcell - added in 2011, abandoned after 2012 acquisition - prima2 - added in 20111, no notable changes since 2015 - tango - added in 2015, sporadic changes until 2017, but abandoned - u300 - added in 2009, no notable changes since 2013 - zx - added in 2015 for both 32, 2017 for 64 bit, no notable changes - arch/c6x - added in 2011, but work stalled soon after that A number of other platforms on the original list turned out to still have users. In some cases there are out-of-tree patches and users that plan to contribute them in the future, in other cases the code is complete and works reliably" Link: https://lore.kernel.org/lkml/CAK8P3a2DZ8xQp7R=H=wewHnT2=a_=M53QsZOueMVEf7tOZLKNg@mail.gmail.com/ * tag 'arm-platform-removal-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: remove u300 platform ARM: remove tango platform ARM: remove zte zx platform ARM: remove sirf prima2/atlas platforms c6x: remove architecture MAINTAINERS: Remove deleted platform efm32 ARM: drop efm32 platform ARM: Remove PicoXcell platform support ARM: dts: Remove PicoXcell platforms
2021-02-20Merge tag 'arm-fixes-v5.12' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "There are only two left-over remaining non-urgent ARM SoC bug fixes: - A build fix for the Atmel SAM9 platform to allow building with the clang integrated assembler - A DT fix for ethernet on Intel SoCFPGA, this has been broken since it was added in v5.4" * tag 'arm-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: ARM: at91: use proper asm syntax in pm_suspend arm64: dts: agilex: fix phy interface bit shift for gmac1 and gmac2
2021-02-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds1581-32960/+110365
Pull networking updates from David Miller: "Here is what we have this merge window: 1) Support SW steering for mlx5 Connect-X6Dx, from Yevgeny Kliteynik. 2) Add RSS multi group support to octeontx2-pf driver, from Geetha Sowjanya. 3) Add support for KS8851 PHY. From Marek Vasut. 4) Add support for GarfieldPeak bluetooth controller from Kiran K. 5) Add support for half-duplex tcan4x5x can controllers. 6) Add batch skb rx processing to bcrm63xx_enet, from Sieng Piaw Liew. 7) Rework RX port offload infrastructure, particularly wrt, UDP tunneling, from Jakub Kicinski. 8) Add BCM72116 PHY support, from Florian Fainelli. 9) Remove Dsa specific notifiers, they are unnecessary. From Vladimir Oltean. 10) Add support for picosecond rx delay in dwmac-meson8b chips. From Martin Blumenstingl. 11) Support TSO on xfrm interfaces from Eyal Birger. 12) Add support for MP_PRIO to mptcp stack, from Geliang Tang. 13) Support BCM4908 integrated switch, from Rafał Miłecki. 14) Support for directly accessing kernel module variables via module BTF info, from Andrii Naryiko. 15) Add DASH (esktop and mobile Architecture for System Hardware) support to r8169 driver, from Heiner Kallweit. 16) Add rx vlan filtering to dpaa2-eth, from Ionut-robert Aron. 17) Add support for 100 base0x SFP devices, from Bjarni Jonasson. 18) Support link aggregation in DSA, from Tobias Waldekranz. 19) Support for bitwidse atomics in bpf, from Brendan Jackman. 20) SmartEEE support in at803x driver, from Russell King. 21) Add support for flow based tunneling to GTP, from Pravin B Shelar. 22) Allow arbitrary number of interconnrcts in ipa, from Alex Elder. 23) TLS RX offload for bonding, from Tariq Toukan. 24) RX decap offklload support in mac80211, from Felix Fietkou. 25) devlink health saupport in octeontx2-af, from George Cherian. 26) Add TTL attr to SCM_TIMESTAMP_OPT_STATS, from Yousuk Seung 27) Delegated actionss support in mptcp, from Paolo Abeni. 28) Support receive timestamping when doin zerocopy tcp receive. From Arjun Ray. 29) HTB offload support for mlx5, from Maxim Mikityanskiy. 30) UDP GRO forwarding, from Maxim Mikityanskiy. 31) TAPRIO offloading in dsa hellcreek driver, from Kurt Kanzenbach. 32) Weighted random twos choice algorithm for ipvs, from Darby Payne. 33) Fix netdev registration deadlock, from Johannes Berg. 34) Various conversions to new tasklet api, from EmilRenner Berthing. 35) Bulk skb allocations in veth, from Lorenzo Bianconi. 36) New ethtool interface for lane setting, from Danielle Ratson. 37) Offload failiure notifications for routes, from Amit Cohen. 38) BCM4908 support, from Rafał Miłecki. 39) Support several new iwlwifi chips, from Ihab Zhaika. 40) Flow drector support for ipv6 in i40e, from Przemyslaw Patynowski. 41) Support for mhi prrotocols, from Loic Poulain. 42) Optimize bpf program stats. 43) Implement RFC6056, for better port randomization, from Eric Dumazet. 44) hsr tag offloading support from George McCollister. 45) Netpoll support in qede, from Bhaskar Upadhaya. 46) 2005/400g speed support in bonding 3ad mode, from Nikolay Aleksandrov. 47) Netlink event support in mptcp, from Florian Westphal. 48) Better skbuff caching, from Alexander Lobakin. 49) MRP (Media Redundancy Protocol) offloading in DSA and a few drivers, from Horatiu Vultur. 50) mqprio saupport in mvneta, from Maxime Chevallier. 51) Remove of_phy_attach, no longer needed, from Florian Fainelli" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1766 commits) octeontx2-pf: Fix otx2_get_fecparam() cteontx2-pf: cn10k: Prevent harmless double shift bugs net: stmmac: Add PCI bus info to ethtool driver query output ptp: ptp_clockmatrix: clean-up - parenthesis around a == b are unnecessary ptp: ptp_clockmatrix: Simplify code - remove unnecessary `err` variable. ptp: ptp_clockmatrix: Coding style - tighten vertical spacing. ptp: ptp_clockmatrix: Clean-up dev_*() messages. ptp: ptp_clockmatrix: Remove unused header declarations. ptp: ptp_clockmatrix: Add alignment of 1 PPS to idtcm_perout_enable. ptp: ptp_clockmatrix: Add wait_for_sys_apll_dpll_lock. net: stmmac: dwmac-sun8i: Add a shutdown callback net: stmmac: dwmac-sun8i: Minor probe function cleanup net: stmmac: dwmac-sun8i: Use reset_control_reset net: stmmac: dwmac-sun8i: Remove unnecessary PHY power check net: stmmac: dwmac-sun8i: Return void from PHY unpower r8169: use macro pm_ptr net: mdio: Remove of_phy_attach() net: mscc: ocelot: select PACKING in the Kconfig net: re-solve some conflicts after net -> net-next merge net: dsa: tag_rtl4_a: Support also egress tags ...
2021-02-20fix handling of nd->depth on LOOKUP_CACHED failures in try_to_unlazy*Al Viro1-4/+5
After switching to non-RCU mode, we want nd->depth to match the number of entries in nd->stack[] that need eventual path_put(). legitimize_links() takes care of that on failures; unfortunately, failure exits added for LOOKUP_CACHED do not. We could add the logics for that into those failure exits, both in try_to_unlazy() and in try_to_unlazy_next(), but since both checks are immediately followed by legitimize_links() and there's no calls of legitimize_links() other than those two... It's easier to move the check (and required handling of nd->depth on failure) into legitimize_links() itself. [caught by Jens: ... and since we are zeroing ->depth here, we need to do drop_links() first] Fixes: 6c6ec2b0a3e0 "fs: add support for LOOKUP_CACHED" Tested-by: Jens Axboe <[email protected]> Signed-off-by: Al Viro <[email protected]>
2021-02-19kprobes: Fix to delay the kprobes jump optimizationMasami Hiramatsu1-10/+21
Commit 36dadef23fcc ("kprobes: Init kprobes in early_initcall") moved the kprobe setup in early_initcall(), which includes kprobe jump optimization. The kprobes jump optimizer involves synchronize_rcu_tasks() which depends on the ksoftirqd and rcu_spawn_tasks_*(). However, since those are setup in core_initcall(), kprobes jump optimizer can not run at the early_initcall(). To avoid this issue, make the kprobe optimization disabled in the early_initcall() and enables it in subsys_initcall(). Note that non-optimized kprobes is still available after early_initcall(). Only jump optimization is delayed. Link: https://lkml.kernel.org/r/161365856280.719838.12423085451287256713.stgit@devnote2 Fixes: 36dadef23fcc ("kprobes: Init kprobes in early_initcall") Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: RCU <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Daniel Axtens <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Neeraj Upadhyay <[email protected]> Cc: Joel Fernandes <[email protected]> Cc: Michal Hocko <[email protected]> Cc: "Theodore Y . Ts'o" <[email protected]> Cc: Oleksiy Avramchenko <[email protected]> Cc: [email protected] Reported-by: Paul E. McKenney <[email protected]> Reported-by: Sebastian Andrzej Siewior <[email protected]> Reported-by: Uladzislau Rezki <[email protected]> Acked-by: Paul E. McKenney <[email protected]> Signed-off-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2021-02-19Input: applespi - fix occasional crc errors under load.Ronald Tschalär1-0/+2
For some reason, when the system is under heavy CPU load, the read following the write sometimes occurs unusually quickly, resulting in the read data not being quite ready and hence a bad packet getting read. Adding another delay after reading the status message appears to fix this. Signed-off-by: Ronald Tschalär <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2021-02-19Input: applespi - don't wait for responses to commands indefinitely.Ronald Tschalär1-6/+15
The response to a command may never arrive or it may be corrupted (and hence dropped) for some reason. While exceedingly rare, when it did happen it blocked all further commands. One way to fix this was to do a suspend/resume. However, recovering automatically seems like a nicer option. Hence this puts a time limit (1 sec) on how long we're willing to wait for a response, after which we assume it got lost. Signed-off-by: Ronald Tschalär <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2021-02-19Input: st1232 - add IDLE state as ready conditionMichael Tretter1-1/+1
The st1232 can switch from NORMAL to IDLE state after the configured idle time (by default 8 s). If the st1232 is not reset during probe, it might already be ready but in IDLE state. Since it does not enter NORMAL state in this case, probe fails. Fix the wait function to report the IDLE state as ready, too. Fixes: f605be6a57b4 ("Input: st1232 - wait until device is ready before reading resolution") Signed-off-by: Michael Tretter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2021-02-19Input: zinitix - fix return type of zinitix_init_touch()Dmitry Torokhov1-1/+1
zinitix_init_touch() returns error code or 0 for success and therefore return type must be int, not bool. Fixes: 26822652c85e ("Input: add zinitix touchscreen driver") Reported-by: kernel test robot <[email protected]> Reported-by: Jiapeng Chong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2021-02-19Input: i8042 - add ASUS Zenbook Flip to noselftest listMarcos Paulo de Souza1-0/+4
After commit 77b425399f6d ("Input: i8042 - use chassis info to skip selftest on Asus laptops"), all modern Asus laptops have the i8042 selftest disabled. It has done by using chassys type "10" (laptop). The Asus Zenbook Flip suffers from similar suspend/resume issues, but it _sometimes_ work and sometimes it doesn't. Setting noselftest makes it work reliably. In this case, we need to add chassis type "31" (convertible) in order to avoid selftest in this device. Reported-by: Ludvig Norgren Guldhag <[email protected]> Signed-off-by: Marcos Paulo de Souza <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2021-02-19Input: add missing dependencies on CONFIG_HAS_IOMEMDmitry Torokhov3-4/+4
devm_ioremap_resource() is only guaranteed to be present if CONFIG_HAS_IOMEM is set. Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2021-02-19Input: joydev - prevent potential read overflow in ioctlDan Carpenter1-2/+5
The problem here is that "len" might be less than "joydev->nabs" so the loops which verfy abspam[i] and keypam[] might read beyond the buffer. Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/YCyzR8WvFRw4HWw6@mwanda [dtor: additional check for len being even in joydev_handle_JSIOCSBTNMAP] Cc: [email protected] Signed-off-by: Dmitry Torokhov <[email protected]>
2021-02-19vfio/pci: remove CONFIG_VFIO_PCI_ZDEV from KconfigMax Gurtovoy4-21/+7
In case we're running on s390 system always expose the capabilities for configuration of zPCI devices. In case we're running on different platform, continue as usual. Signed-off-by: Max Gurtovoy <[email protected]> Reviewed-by: Matthew Rosato <[email protected]> Reviewed-by: Cornelia Huck <[email protected]> Signed-off-by: Alex Williamson <[email protected]>
2021-02-19cxl/mem: Return -EFAULT if copy_to_user() failsDan Carpenter1-1/+4
The copy_to_user() function returns the number of bytes remaining to be copied, but we want to return -EFAULT if the copy doesn't complete. Fixes: b754ffbbc0ee ("cxl/mem: Add basic IOCTL interface") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/YC+K3kgzqm20zCWY@mwanda Signed-off-by: Dan Williams <[email protected]>
2021-02-19cpufreq: Fix typo in kerneldoc commentYue Hu1-1/+1
Change 'Terget' to 'Target'. Should be Target. Signed-off-by: Yue Hu <[email protected]> Acked-by: Viresh Kumar <[email protected]> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-02-19cpufreq: schedutil: Remove update_lock comment from struct sugov_policy ↵Yue Hu1-1/+1
definition Currently, update_lock is also used in sugov_update_single_freq(). The comment is not helpful anymore. Signed-off-by: Yue Hu <[email protected]> Acked-by: Viresh Kumar <[email protected]> [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-02-19cpufreq: schedutil: Remove needless sg_policy parameter from ↵Yue Hu1-7/+5
ignore_dl_rate_limit() Since sg_policy is a member of struct sugov_cpu. Also remove the local variable in sugov_update_single_common() to make the code more clean. Signed-off-by: Yue Hu <[email protected]> Acked-by: Viresh Kumar <[email protected]> [ rjw: Minor subject edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-02-19ACPICA: Remove some code duplication from acpi_ev_address_space_dispatchHans de Goede1-18/+5
ACPICA commit 383f50ff8cb7424ca16a6c0234f103b41d4a783e The handling of the space_id == ACPI_ADR_SPACE_GSBUS and space_id == ACPI_ADR_SPACE_GPIO cases is almost identical, fold the 2 cases into 1 to remove some code duplication. Link: https://github.com/acpica/acpica/commit/383f50ff Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-02-19ACPICA: Fix race in generic_serial_bus (I2C) and GPIO op_region parameter ↵Hans de Goede4-17/+57
handling ACPICA commit c9e0116952363b0fa815143dca7e9a2eb4fefa61 The handling of the generic_serial_bus (I2C) and GPIO op_regions in acpi_ev_address_space_dispatch() passes a number of extra parameters to the address-space handler through the address-space Context pointer (instead of using more function parameters). The Context is shared between threads, so if multiple threads try to call the handler for the same address-space at the same time, then a second thread could change the parameters of a first thread while the handler is running for the first thread. An example of this race hitting is the Lenovo Yoga Tablet2 1015L, where there are both attrib_bytes accesses and attrib_byte accesses to the same address-space. The attrib_bytes access stores the number of bytes to transfer in Context->access_length. Where as for the attrib_byte access the number of bytes to transfer is always 1 and field_obj->Field.access_length is unused (so 0). Both types of accesses racing from different threads leads to the following problem: 1. Thread a. starts an attrib_bytes access, stores a non 0 value from field_obj->Field.access_length in Context->access_length 2. Thread b. starts an attrib_byte access, stores 0 in Context->access_length 3. Thread a. calls i2c_acpi_space_handler() (under Linux). Which sees that the access-type is ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE and calls acpi_gsb_i2c_read_bytes(..., Context->access_length) 4. At this point Context->access_length is 0 (set by thread b.) rather then the field_obj->Field.access_length value from thread a. This 0 length reads leads to the following errors being logged: i2c i2c-0: adapter quirk: no zero length (addr 0x0078, size 0, read) i2c i2c-0: i2c read 0 bytes from client@0x78 starting at reg 0x0 failed, error: -95 Note this is just an example of the problems which this race can cause. There are likely many more (sporadic) problems caused by this race. This commit adds a new context_mutex to struct acpi_object_addr_handler and makes acpi_ev_address_space_dispatch() take that mutex when using the shared Context to pass extra parameters to an address-space handler, fixing this race. Note the new mutex must be taken *after* exiting the interpreter, therefor the existing acpi_ex_exit_interpreter() call is moved to above the code which stores the extra parameters in the Context. Link: https://github.com/acpica/acpica/commit/c9e01169 Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Bob Moore <[email protected]> Signed-off-by: Erik Kaneda <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-02-19Revert "driver core: Set fw_devlink=on by default"Greg Kroah-Hartman1-1/+1
This reverts commit e590474768f1cc04852190b61dec692411b22e2a. While things are _almost_ there and working for almost all systems, there are still reported regressions happening, so let's revert this default for 5.12. We can bring it back in linux-next after 5.12-rc1 is out to get more testing and hopefully solve the remaining different subsystem and driver issues that people are running into. Cc: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-02-19of: property: fw_devlink: Ignore interrupts property for some configsSaravana Kannan1-0/+3
When CONFIG_OF_IRQ is not defined, it doesn't make sense to parse interrupts property. Also, parsing and tracking interrupts property breaks some PPC devices[1]. But none of the IRQ drivers in PPC seem ready to be converted to a proper platform (or any bus) driver. So, there's not much of a point in tracking the interrupts property for CONFIG_PPC. So, let's stop parsing interrupts for CONFIG_PPC. [1] - https://lore.kernel.org/lkml/[email protected]/ Fixes: 4104ca776ba3 ("of: property: Add fw_devlink support for interrupts") Reported-by: Guenter Roeck <[email protected]> Tested-by: Guenter Roeck <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-02-19nios2: Don't use _end for calculating min_low_pfnAndreas Oetken1-9/+12
If there is a initramfs linked into the kernel which will be freed later on there is free memory somewhere between _etext and _end, thus using _end for min_low_pfn is not correct. This may lead to issues in dma_capable when checking 'min(addr, end) < phys_to_dma(dev, PFN_PHYS(min_low_pfn)))' as the address addr might be below min_low_pfn. Picked find_limits from architecture arm for applying min_low_pfn and max_low_pfn. Maybe using _etext for min_low_pfn would be fine too. Signed-off-by: Andreas Oetken <[email protected]> Signed-off-by: Ley Foon Tan <[email protected]>
2021-02-19nios2: fixed broken sys_clone syscallAndreas Oetken1-0/+3
The tls pointer must be pushed on the stack prior to calling nios2_clone as it is the 5th function argument. Prior handling of the tls pointer was done inside former called function copy_thread_tls using the r8 register from the current_pt_regs directly. This was a bad design and resulted in the current bug introduced in 04bd52fb. Fixes: 04bd52fb ("nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args") Signed-off-by: Andreas Oetken <[email protected]> Signed-off-by: Ley Foon Tan <[email protected]> Acked-by: Christian Brauner <[email protected]>
2021-02-19Take mmap lock in cacheflush syscallJann Horn1-2/+9
We need to take the mmap lock around find_vma() and subsequent use of the VMA. Otherwise, we can race with concurrent operations like munmap(), which can lead to use-after-free accesses to freed VMAs. Fixes: 1000197d8013 ("nios2: System calls handling") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Ley Foon Tan <[email protected]>
2021-02-19Merge tag 'drm-intel-next-fixes-2021-02-18' of ↵Dave Airlie16-60/+115
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Restrict DRM_I915_DEBUG to developer builds (Chris) - Fix return and error codes (Dan) - Suspend/Resume fix (Chris) - Disable atomics in L3 for gen9 (Chris) - Flush before changing register state (Chris) - Fix for GLK's HDMI (Ville) - Fix ILK+'s plane strides with Xtiling (Ville) - Correct surface base address for renderclear (Chris) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-02-19Merge tag 'amd-drm-next-5.12-2021-02-18' of ↵Dave Airlie86-342/+1147
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.12-2021-02-18: amdgpu: - Prefer Bhawan's unused variable fix - Fixes for high priority queues on gfx8,9 - swSMU fixes for sienna cichlid - swSMU fixes for renoir - mmhub client id fixes for arcturus - SMUIO fixes for navi family - swSMU fixes for vangogh - GPU reset cleanup - Display fixes - GFX harvesting fix for sienna cichlid - Fix reference clock on Renoir - Misc fixes and cleanups amdkfd: - Fix for unique id query - Fix recursive lock warnings radeon: - Remove confusing VCE messages on Oland Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-02-18sparc: make xchg() into a statement expressionRandy Dunlap1-1/+1
Fix several of the same warning by using a GCC statement expression (extension): ../arch/sparc/include/asm/cmpxchg_32.h:28:22: warning: value computed is not used [-Wunused-value] 28 | #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) Passes sparc32 allmodconfig with no xchg warnings. Signed-off-by: Randy Dunlap <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc64: Use arch_validate_flags() to validate ADI flagKhalid Aziz1-25/+29
When userspace calls mprotect() to enable ADI on an address range, do_mprotect_pkey() calls arch_validate_prot() to validate new protection flags. arch_validate_prot() for sparc looks at the first VMA associated with address range to verify if ADI can indeed be enabled on this address range. This has two issues - (1) Address range might cover multiple VMAs while arch_validate_prot() looks at only the first VMA, (2) arch_validate_prot() peeks at VMA without holding mmap lock which can result in race condition. arch_validate_flags() from commit c462ac288f2c ("mm: Introduce arch_validate_flags()") allows for VMA flags to be validated for all VMAs that cover the address range given by user while holding mmap lock. This patch updates sparc code to move the VMA check from arch_validate_prot() to arch_validate_flags() to fix above two issues. Suggested-by: Jann Horn <[email protected]> Suggested-by: Christoph Hellwig <[email protected]> Suggested-by: Catalin Marinas <[email protected]> Signed-off-by: Khalid Aziz <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc32: Fix comparing pointer to 0 coccicheck warningKaixu Xia1-1/+1
Fixes coccicheck warning: /arch/sparc/mm/srmmu.c:354:42-43: WARNING comparing pointer to 0 Avoid pointer type value compared to 0. Reported-by: Tosk Robot <[email protected]> Signed-off-by: Kaixu Xia <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc: fix led.c driver when PROC_FS is not enabledRandy Dunlap1-0/+2
Fix Sparc build when CONFIG_PROC_FS is not enabled. Fixes this build error: arch/sparc/kernel/led.c:107:30: error: 'led_proc_ops' defined but not used [-Werror=unused-const-variable=] 107 | static const struct proc_ops led_proc_ops = { | ^~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: 97a32539b956 ("proc: convert everything to "struct proc_ops"") Reported-by: kernel test robot <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Cc: Alexey Dobriyan <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Lars Kotthoff <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc: Fix handling of page table constructor failureMatthew Wilcox (Oracle)1-1/+1
The page has just been allocated, so its refcount is 1. free_unref_page() is for use on pages which have a zero refcount. Use __free_page() like the other implementations of pte_alloc_one(). Fixes: 1ae9ae5f7df7 ("sparc: handle pgtable_page_ctor() fail") Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Reviewed-by: Mike Rapoport <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc64: only select COMPAT_BINFMT_ELF if BINFMT_ELF is setRandy Dunlap1-1/+1
Currently COMPAT on SPARC64 selects COMPAT_BINFMT_ELF unconditionally, even when BINFMT_ELF is not enabled. This causes a kconfig warning. Instead, just select COMPAT_BINFMT_ELF if BINFMT_ELF is enabled. This builds cleanly with no kconfig warnings. WARNING: unmet direct dependencies detected for COMPAT_BINFMT_ELF Depends on [n]: COMPAT [=y] && BINFMT_ELF [=n] Selected by [y]: - COMPAT [=y] && SPARC64 [=y] Fixes: 26b4c912185a ("sparc,sparc64: unify Kconfig files") Signed-off-by: Randy Dunlap <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: [email protected] Cc: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18tty: hvcs: Drop unnecessary if blockUwe Kleine-König1-3/+0
If hvcs_probe() succeeded dev_set_drvdata() is called with a non-NULL value, and if hvcs_probe() failed hvcs_remove() isn't called. So there is no way dev_get_drvdata() can return NULL in hvcs_remove() and the check can just go away. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Jiri Slaby <[email protected]> Reviewed-by: Tyrel Datwyler <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18tty: vcc: Drop unnecessary if blockUwe Kleine-König1-3/+0
If vcc_probe() succeeded dev_set_drvdata() is called with a non-NULL value, and if vcc_probe() failed vcc_remove() isn't called. So there is no way dev_get_drvdata() can return NULL in vcc_remove() and the check can just go away. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Jiri Slaby <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18tty: vcc: Drop impossible to hit WARN_ONUwe Kleine-König1-5/+2
vcc_get() returns the port that has provided port->index. As the port that is about to be removed isn't removed yet this trivially will find this port. So simplify the call to not assign an identical value to the port pointer and drop the warning that is never hit. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Jiri Slaby <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc: sparc64_defconfig: add necessary configs for qemuCorentin Labbe1-0/+6
The sparc64 qemu machines uses sunhme network hardware by default, so for simple NFS boot testing using qemu, having CONFIG_HAPPYMEAL is useful. And so we need also IP_PNP_DHCP for NFS boot. For the same reason we need to enable its storage which is a PATA_CMD64. And finally, we need CONFIG_DEVTMPFS for handling recent udev/systemd. All those options will permit to enable boot testing in both kernelCI and gentoo's kernelCI. Signed-off-by: Corentin Labbe <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc64: switch defconfig from the legacy ide driver to libataChristoph Hellwig1-3/+2
Replace the ide options with the equivalent libata options. This has been carried by various downstreams like the linux-build-test repo for years already. Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc32: Preserve clone syscall flags argument for restarts due to signalsAndreas Larsson2-6/+4
This fixes a bug where a clone syscall that is restarted due to a pending signal is restarted with garbage in the register %o0 that holds the clone flags. This keep the original %i0 of a syscall (as seen from the trap handler) in %l6 rather than %l5. This is done because for clone (and also qfork) %l5 is used as a temporary variable in the same register window. Before this, that temporary value would be the value that was then incorrectly used as the orig_i0 argument to do_notify_resume. In order to preserve %l6, the temporary usage of %l6 in ret_sys_call is changed to use %l5 instead and the setting %l6 to 0 or 1 was removed. The use of that 0 or 1 value in %l6 was removed in commit 28e6103665301ce60634e8a77f0b657c6cc099de. Signed-off-by: Andreas Larsson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc32: Limit memblock allocation to low memoryAndreas Larsson1-0/+3
Commit cca079ef8ac29a7c02192d2bad2ffe4c0c5ffdd0 changed sparc32 to use memblocks instead of bootmem, but also made high memory available via memblock allocation which does not work together with e.g. phys_to_virt and can lead to kernel panic. This changes back to only low memory being allocatable in the early stages, now using memblock allocation. Signed-off-by: Andreas Larsson <[email protected]> Acked-by: Mike Rapoport <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18sparc: Replace test_ti_thread_flag() with test_tsk_thread_flag()Tiezhu Yang1-1/+1
Use test_tsk_thread_flag() directly instead of test_ti_thread_flag() to improve readability when the argument type is struct task_struct, it is similar with commit 5afc78551bf5 ("arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP"). Signed-off-by: Tiezhu Yang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-02-18PCI: acpiphp: Remove unused acpiphp_callback typedefChen Lin1-3/+0
Remove the 'acpiphp_callback' typedef as it is not used. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Chen Lin <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Krzysztof Wilczyński <[email protected]> Reviewed-by: Rafael J. Wysocki <[email protected]>
2021-02-18Input: elo - fix an error code in elo_connect()Dan Carpenter1-1/+3
If elo_setup_10() fails then this should return an error code instead of success. Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda Signed-off-by: Dmitry Torokhov <[email protected]>
2021-02-18drm/amdgpu: Set reference clock to 100Mhz on Renoir (v2)Alex Deucher1-0/+2
Fixes the rlc reference clock used for GPU timestamps. Value is 100Mhz. Confirmed with hardware team. v2: reword commit message. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1480 Acked-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-02-18drm/radeon: OLAND boards don't have VCEAlex Deucher3-2/+3
Disable it on those boards. No functional change, this just removes the message about VCE failing to initialize. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197327 Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-02-18drm/amdkfd: Fix recursive lock warningsFelix Kuehling1-2/+2
memalloc_nofs_save/restore are no longer sufficient to prevent recursive lock warnings when holding locks that can be taken in MMU notifiers. Use memalloc_noreclaim_save/restore instead. Fixes: f920e413ff9c ("mm: track mmu notifiers in fs_reclaim_acquire/release") CC: Daniel Vetter <[email protected]> Reviewed-by: Philip Yang <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.10.x
2021-02-18drm/amd/display: Add FPU wrappers to dcn21_validate_bandwidth()Jan Kokemüller2-3/+19
dcn21_validate_bandwidth() calls functions that use floating point math. On my machine this sometimes results in simd exceptions when there are other FPU users such as KVM virtual machines running. The screen freezes completely in this case. Wrapping the function with DC_FP_START()/DC_FP_END() seems to solve the problem. This mirrors the approach used for dcn20_validate_bandwidth. Tested on a AMD Ryzen 7 PRO 4750U (Renoir). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206987 Signed-off-by: Jan Kokemüller <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-02-18drm/amd/display: Fix potential integer overflowGustavo A. R. Silva1-1/+1
Fix potential integer overflow by casting actual_calculated_clock_100hz to u64, in order to give the compiler complete information about the proper arithmetic to use. Notice that such variable is used in a context that expects an expression of type u64 (64 bits, unsigned) and the following expression is currently being evaluated using 32-bit arithmetic: actual_calculated_clock_100hz * post_divider Fixes: 7a03fdf628af ("drm/amd/display: fix 64bit division issue on 32bit OS") Addresses-Coverity-ID: 1501691 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.