aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-15Merge branches 'acpi-ec', 'acpi-tables' and 'acpi-doc'Rafael J. Wysocki4-0/+86
* acpi-ec: ACPI / EC: Restore polling during noirq suspend/resume phases * acpi-tables: ACPI: SPCR: Mark expected switch fall-through in acpi_parse_spcr * acpi-doc: ACPI: dock: document sysfs interface ACPI / DPTF: Document dptf_power sysfs atttributes
2018-02-15Merge branches 'pm-cpuidle' and 'pm-opp'Rafael J. Wysocki3-4/+77
* pm-cpuidle: PM: cpuidle: Fix cpuidle_poll_state_init() prototype Documentation/ABI: update cpuidle sysfs documentation * pm-opp: opp: cpu: Replace GFP_ATOMIC with GFP_KERNEL in dev_pm_opp_init_cpufreq_table
2018-02-15platform/x86: dell-laptop: Removed duplicates in DMI whitelistAlexander Abrosimov1-18/+0
Fixed a mistake in which several entries were duplicated in the DMI list from the below commit fe486138 platform/x86: dell-laptop: Add 2-in-1 devices to the DMI whitelist Signed-off-by: Alexander Abrosimov <[email protected]> Reviewed-by: Pali Rohár <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2018-02-15platform/x86: dell-laptop: fix kbd_get_state's request valueLaszlo Toth1-1/+1
Commit 9862b43624a5 ("platform/x86: dell-laptop: Allocate buffer on heap rather than globally") broke one request, changed it back to the original value. Tested on a Dell E6540, backlight came back. Fixes: 9862b43624a5 ("platform/x86: dell-laptop: Allocate buffer on heap rather than globally") Signed-off-by: Laszlo Toth <[email protected]> Reviewed-by: Pali Rohár <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2018-02-15platform/x86: ideapad-laptop: Increase timeout to wait for EC answerAaron Ma1-1/+1
Lenovo E41-20 needs more time than 100ms to read VPC, the funtion keys always failed responding. Increase timeout to get the value from VPC, then the funtion keys like mic mute key work well. Signed-off-by: Aaron Ma <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2018-02-15platform/x86: wmi: fix off-by-one write in wmi_dev_probe()Andrey Ryabinin1-1/+1
wmi_dev_probe() allocates one byte less than necessary, thus subsequent sprintf() call writes trailing zero past the end of the 'buf': BUG: KASAN: slab-out-of-bounds in vsnprintf+0xda4/0x1240 Write of size 1 at addr ffff880423529caf by task kworker/1:1/32 Call Trace: dump_stack+0xb3/0x14d print_address_description+0xd7/0x380 kasan_report+0x166/0x2b0 vsnprintf+0xda4/0x1240 sprintf+0x9b/0xd0 wmi_dev_probe+0x1c3/0x400 driver_probe_device+0x5d1/0x990 bus_for_each_drv+0x109/0x190 __device_attach+0x217/0x360 bus_probe_device+0x1ad/0x260 deferred_probe_work_func+0x10f/0x5d0 process_one_work+0xa8b/0x1dc0 worker_thread+0x20d/0x17d0 kthread+0x311/0x3d0 ret_from_fork+0x3a/0x50 Allocated by task 32: kasan_kmalloc+0xa0/0xd0 __kmalloc+0x14f/0x3e0 wmi_dev_probe+0x182/0x400 driver_probe_device+0x5d1/0x990 bus_for_each_drv+0x109/0x190 __device_attach+0x217/0x360 bus_probe_device+0x1ad/0x260 deferred_probe_work_func+0x10f/0x5d0 process_one_work+0xa8b/0x1dc0 worker_thread+0x20d/0x17d0 kthread+0x311/0x3d0 ret_from_fork+0x3a/0x50 Increment allocation size to fix this. Fixes: 44b6b7661132 ("platform/x86: wmi: create userspace interface for drivers") Signed-off-by: Andrey Ryabinin <[email protected]> Cc: <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2018-02-14Merge branch 'nvme-4.16-rc' of git://git.infradead.org/nvme into for-linusJens Axboe7-170/+106
Pull NVMe fixes from Keith: "After syncing with Christoph and Sagi, we feel this is a good time to send our latest fixes across most of the nvme components for 4.16" * 'nvme-4.16-rc' of git://git.infradead.org/nvme: nvme-rdma: fix sysfs invoked reset_ctrl error flow nvmet: Change return code of discard command if not supported nvme-pci: Fix timeouts in connecting state nvme-pci: Remap CMB SQ entries on every controller reset nvme: fix the deadlock in nvme_update_formats nvme: Don't use a stack buffer for keep-alive command nvme_fc: cleanup io completion nvme_fc: correct abort race condition on resets nvme: Fix discard buffer overrun nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
2018-02-14Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds14-81/+146
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes all across the map: - /proc/kcore vsyscall related fixes - LTO fix - build warning fix - CPU hotplug fix - Kconfig NR_CPUS cleanups - cpu_has() cleanups/robustification - .gitignore fix - memory-failure unmapping fix - UV platform fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm, mm/hwpoison: Don't unconditionally unmap kernel 1:1 pages x86/error_inject: Make just_return_func() globally visible x86/platform/UV: Fix GAM Range Table entries less than 1GB x86/build: Add arch/x86/tools/insn_decoder_test to .gitignore x86/smpboot: Fix uncore_pci_remove() indexing bug when hot-removing a physical CPU x86/mm/kcore: Add vsyscall page to /proc/kcore conditionally vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page x86/Kconfig: Further simplify the NR_CPUS config x86/Kconfig: Simplify NR_CPUS config x86/MCE: Fix build warning introduced by "x86: do not use print_symbol()" x86/cpufeature: Update _static_cpu_has() to use all named variables x86/cpufeature: Reindent _static_cpu_has()
2018-02-14Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds69-362/+444
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 PTI and Spectre related fixes and updates from Ingo Molnar: "Here's the latest set of Spectre and PTI related fixes and updates: Spectre: - Add entry code register clearing to reduce the Spectre attack surface - Update the Spectre microcode blacklist - Inline the KVM Spectre helpers to get close to v4.14 performance again. - Fix indirect_branch_prediction_barrier() - Fix/improve Spectre related kernel messages - Fix array_index_nospec_mask() asm constraint - KVM: fix two MSR handling bugs PTI: - Fix a paranoid entry PTI CR3 handling bug - Fix comments objtool: - Fix paranoid_entry() frame pointer warning - Annotate WARN()-related UD2 as reachable - Various fixes - Add Add Peter Zijlstra as objtool co-maintainer Misc: - Various x86 entry code self-test fixes - Improve/simplify entry code stack frame generation and handling after recent heavy-handed PTI and Spectre changes. (There's two more WIP improvements expected here.) - Type fix for cache entries There's also some low risk non-fix changes I've included in this branch to reduce backporting conflicts: - rename a confusing x86_cpu field name - de-obfuscate the naming of single-TLB flushing primitives" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits) x86/entry/64: Fix CR3 restore in paranoid_exit() x86/cpu: Change type of x86_cache_size variable to unsigned int x86/spectre: Fix an error message x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_stepping selftests/x86/mpx: Fix incorrect bounds with old _sigfault x86/mm: Rename flush_tlb_single() and flush_tlb_one() to __flush_tlb_one_[user|kernel]() x86/speculation: Add <asm/msr-index.h> dependency nospec: Move array_index_nospec() parameter checking into separate macro x86/speculation: Fix up array_index_nospec_mask() asm constraint x86/debug: Use UD2 for WARN() x86/debug, objtool: Annotate WARN()-related UD2 as reachable objtool: Fix segfault in ignore_unreachable_insn() selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systems selftests/x86: Do not rely on "int $0x80" in single_step_syscall.c selftests/x86: Do not rely on "int $0x80" in test_mremap_vdso.c selftests/x86: Fix build bug caused by the 5lvl test which has been moved to the VM directory selftests/x86/pkeys: Remove unused functions selftests/x86: Clean up and document sscanf() usage selftests/x86: Fix vDSO selftest segfault for vsyscall=none x86/entry/64: Remove the unused 'icebp' macro ...
2018-02-15x86/entry/64: Fix CR3 restore in paranoid_exit()Ingo Molnar1-0/+1
Josh Poimboeuf noticed the following bug: "The paranoid exit code only restores the saved CR3 when it switches back to the user GS. However, even in the kernel GS case, it's possible that it needs to restore a user CR3, if for example, the paranoid exception occurred in the syscall exit path between SWITCH_TO_USER_CR3_STACK and SWAPGS." Josh also confirmed via targeted testing that it's possible to hit this bug. Fix the bug by also restoring CR3 in the paranoid_exit_no_swapgs branch. The reason we haven't seen this bug reported by users yet is probably because "paranoid" entry points are limited to the following cases: idtentry double_fault do_double_fault has_error_code=1 paranoid=2 idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK idtentry machine_check do_mce has_error_code=0 paranoid=1 Amongst those entry points only machine_check is one that will interrupt an IRQS-off critical section asynchronously - and machine check events are rare. The other main asynchronous entries are NMI entries, which can be very high-freq with perf profiling, but they are special: they don't use the 'idtentry' macro but are open coded and restore user CR3 unconditionally so don't have this bug. Reported-and-tested-by: Josh Poimboeuf <[email protected]> Reviewed-by: Andy Lutomirski <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Dan Williams <[email protected]> Cc: Dave Hansen <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15x86/cpu: Change type of x86_cache_size variable to unsigned intGustavo A. R. Silva4-5/+5
Currently, x86_cache_size is of type int, which makes no sense as we will never have a valid cache size equal or less than 0. So instead of initializing this variable to -1, it can perfectly be initialized to 0 and use it as an unsigned variable instead. Suggested-by: Thomas Gleixner <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Addresses-Coverity-ID: 1464429 Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15x86/spectre: Fix an error messageDan Carpenter1-1/+1
If i == ARRAY_SIZE(mitigation_options) then we accidentally print garbage from one space beyond the end of the mitigation_options[] array. Signed-off-by: Dan Carpenter <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: KarimAllah Ahmed <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Fixes: 9005c6834c0f ("x86/spectre: Simplify spectre_v2 command line parsing") Link: http://lkml.kernel.org/r/20180214071416.GA26677@mwanda Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15x86/cpu: Rename cpu_data.x86_mask to cpu_data.x86_steppingJia Zhang35-73/+73
x86_mask is a confusing name which is hard to associate with the processor's stepping. Additionally, correct an indent issue in lib/cpu.c. Signed-off-by: Jia Zhang <[email protected]> [ Updated it to more recent kernels. ] Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15selftests/x86/mpx: Fix incorrect bounds with old _sigfaultRui Wang1-2/+30
For distributions with old userspace header files, the _sigfault structure is different. mpx-mini-test fails with the following error: [root@Purley]# mpx-mini-test_64 tabletest XSAVE is supported by HW & OS XSAVE processor supported state mask: 0x2ff XSAVE OS supported state mask: 0x2ff BNDREGS: size: 64 user: 1 supervisor: 0 aligned: 0 BNDCSR: size: 64 user: 1 supervisor: 0 aligned: 0 starting mpx bounds table test ERROR: siginfo bounds do not match shadow bounds for register 0 Fix it by using the correct offset of _lower/_upper in _sigfault. RHEL needs this patch to work. Signed-off-by: Rui Wang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Fixes: e754aedc26ef ("x86/mpx, selftests: Add MPX self test") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15x86/mm: Rename flush_tlb_single() and flush_tlb_one() to ↵Andy Lutomirski13-26/+39
__flush_tlb_one_[user|kernel]() flush_tlb_single() and flush_tlb_one() sound almost identical, but they really mean "flush one user translation" and "flush one kernel translation". Rename them to flush_tlb_one_user() and flush_tlb_one_kernel() to make the semantics more obvious. [ I was looking at some PTI-related code, and the flush-one-address code is unnecessarily hard to understand because the names of the helpers are uninformative. This came up during PTI review, but no one got around to doing it. ] Signed-off-by: Andy Lutomirski <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Cc: Boris Ostrovsky <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Eduardo Valentin <[email protected]> Cc: Hugh Dickins <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Linux-MM <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lkml.kernel.org/r/3303b02e3c3d049dc5235d5651e0ae6d29a34354.1517414378.git.luto@kernel.org Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15x86/speculation: Add <asm/msr-index.h> dependencyPeter Zijlstra1-0/+1
Joe Konno reported a compile failure resulting from using an MSR without inclusion of <asm/msr-index.h>, and while the current code builds fine (by accident) this needs fixing for future patches. Reported-by: Joe Konno <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: 20ffa1caecca ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15nospec: Move array_index_nospec() parameter checking into separate macroWill Deacon1-15/+21
For architectures providing their own implementation of array_index_mask_nospec() in asm/barrier.h, attempting to use WARN_ONCE() to complain about out-of-range parameters using WARN_ON() results in a mess of mutually-dependent include files. Rather than unpick the dependencies, simply have the core code in nospec.h perform the checking for us. Signed-off-by: Will Deacon <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: Dan Williams <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15x86/speculation: Fix up array_index_nospec_mask() asm constraintDan Williams1-1/+1
Allow the compiler to handle @size as an immediate value or memory directly rather than allocating a register. Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Dan Williams <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15x86/debug: Use UD2 for WARN()Peter Zijlstra2-10/+7
Since the Intel SDM added an ModR/M byte to UD0 and binutils followed that specification, we now cannot disassemble our kernel anymore. This now means Intel and AMD disagree on the encoding of UD0. And instead of playing games with additional bytes that are valid ModR/M and single byte instructions (0xd6 for instance), simply use UD2 for both WARN() and BUG(). Requested-by: Linus Torvalds <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Acked-by: Linus Torvalds <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15x86/debug, objtool: Annotate WARN()-related UD2 as reachableJosh Poimboeuf1-1/+5
By default, objtool assumes that a UD2 is a dead end. This is mainly because GCC 7+ sometimes inserts a UD2 when it detects a divide-by-zero condition. Now that WARN() is moving back to UD2, annotate the code after it as reachable so objtool can follow the code flow. Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: kbuild test robot <[email protected]> Link: http://lkml.kernel.org/r/0e483379275a42626ba8898117f918e1bf661e40.1518130694.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15objtool: Fix segfault in ignore_unreachable_insn()Josh Poimboeuf1-3/+9
Peter Zijlstra's patch for converting WARN() to use UD2 triggered a bunch of false "unreachable instruction" warnings, which then triggered a seg fault in ignore_unreachable_insn(). The seg fault happened when it tried to dereference a NULL 'insn->func' pointer. Thanks to static_cpu_has(), some functions can jump to a non-function area in the .altinstr_aux section. That breaks ignore_unreachable_insn()'s assumption that it's always inside the original function. Make sure ignore_unreachable_insn() only follows jumps within the current function. Reported-by: Borislav Petkov <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arjan van de Ven <[email protected]> Cc: Brian Gerst <[email protected]> Cc: Denys Vlasenko <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: kbuild test robot <[email protected]> Link: http://lkml.kernel.org/r/bace77a60d5af9b45eddb8f8fb9c776c8de657ef.1518130694.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15selftests/x86: Disable tests requiring 32-bit support on pure 64-bit systemsDominik Brodowski1-7/+13
The ldt_gdt and ptrace_syscall selftests, even in their 64-bit variant, use hard-coded 32-bit syscall numbers and call "int $0x80". This will fail on 64-bit systems with CONFIG_IA32_EMULATION=y disabled. Therefore, do not build these tests if we cannot build 32-bit binaries (which should be a good approximation for CONFIG_IA32_EMULATION=y being enabled). Signed-off-by: Dominik Brodowski <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Dmitry Safonov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15selftests/x86: Do not rely on "int $0x80" in single_step_syscall.cDominik Brodowski2-1/+6
On 64-bit builds, we should not rely on "int $0x80" working (it only does if CONFIG_IA32_EMULATION=y is enabled). To keep the "Set TF and check int80" test running on 64-bit installs with CONFIG_IA32_EMULATION=y enabled, build this test only if we can also build 32-bit binaries (which should be a good approximation for that). Signed-off-by: Dominik Brodowski <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Dmitry Safonov <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-15powerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=nCorentin Labbe1-0/+3
When CONFIG_NUMA is not set, the build fails with: arch/powerpc/platforms/pseries/hotplug-cpu.c:335:4: error: déclaration implicite de la fonction « update_numa_cpu_lookup_table » So we have to add update_numa_cpu_lookup_table() as an empty function when CONFIG_NUMA is not set. Fixes: 1d9a090783be ("powerpc/numa: Invalidate numa_cpu_lookup_table on cpu remove") Signed-off-by: Corentin Labbe <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-02-15powerpc/powernv: IMC fix out of bounds memory access at shutdownNicholas Piggin1-2/+4
The OPAL IMC driver's shutdown handler disables nest PMU counters by walking nodes and taking the first CPU out of their cpumask, which is used to index into the paca (get_hard_smp_processor_id()). This does not always do the right thing, and in particular for CPU-less nodes it returns NR_CPUS and that overruns the paca and dereferences random memory. Fix it by being more careful about checking returned CPU, and only using online CPUs. It's not clear this shutdown code makes sense after commit 885dcd709b ("powerpc/perf: Add nest IMC PMU support"), but this should not make things worse Currently the bug causes us to call OPAL with a junk CPU number. A separate patch in development to change the way pacas are allocated escalates this bug into a crash: Unable to handle kernel paging request for data at address 0x2a21af1eeb000076 Faulting instruction address: 0xc0000000000a5468 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP opal_imc_counters_shutdown+0x148/0x1d0 LR opal_imc_counters_shutdown+0x134/0x1d0 Call Trace: opal_imc_counters_shutdown+0x134/0x1d0 (unreliable) platform_drv_shutdown+0x44/0x60 device_shutdown+0x1f8/0x350 kernel_restart_prepare+0x54/0x70 kernel_restart+0x28/0xc0 SyS_reboot+0x1d0/0x2c0 system_call+0x58/0x6c Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-02-15powerpc/xive: Use hw CPU ids when configuring the CPU queuesCédric Le Goater1-6/+10
The CPU event notification queues on sPAPR should be configured using a hardware CPU identifier. The problem did not show up on the Power Hypervisor because pHyp supports 8 threads per core which keeps CPU number contiguous. This is not the case on all sPAPR virtual machines, some use SMT=1. Also improve error logging by adding the CPU number. Fixes: eac1e731b59e ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Cc: [email protected] # v4.14+ Signed-off-by: Cédric Le Goater <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-02-15powerpc: Expose TSCR via sysfs only on powernvCyril Bur1-2/+4
The TSCR can only be accessed in hypervisor mode. Fixes: 88b5e12eeb11 ("powerpc: Expose TSCR via sysfs") Signed-off-by: Cyril Bur <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-02-14tls: getsockopt return record sequence numberBoris Pismenny1-0/+2
Return the TLS record sequence number in getsockopt. Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14tls: reset the crypto info if copy_from_user failsBoris Pismenny1-1/+1
copy_from_user could copy some partial information, as a result TLS_CRYPTO_INFO_READY(crypto_info) could be true while crypto_info is using uninitialzed data. This patch resets crypto_info when copy_from_user fails. fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14tls: retrun the correct IV in getsockoptBoris Pismenny1-1/+2
Current code returns four bytes of salt followed by four bytes of IV. This patch returns all eight bytes of IV. fixes: 3c4d7559159b ("tls: kernel TLS support") Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14Merge branch 'net-segmentation-offload-doc-fixes'David S. Miller1-4/+34
Daniel Axtens says: ==================== Updates to segmentation-offloads.txt I've been trying to wrap my head around GSO for a while now. This is a set of small changes to the docs that would probably have been helpful when I was starting out. I realise that GSO_DODGY is still a notable omission - I'm hesitant to write too much on it just yet as I don't understand it well and I think it's in the process of changing. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-14docs: segmentation-offloads.txt: add SCTP infoDaniel Axtens1-0/+26
Most of this is extracted from 90017accff61 ("sctp: Add GSO support"), with some extra text about GSO_BY_FRAGS and the need to check for it. Cc: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Daniel Axtens <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14docs: segmentation-offloads.txt: Fix ref to SKB_GSO_TUNNEL_REMCSUMDaniel Axtens1-4/+4
The doc originally called it SKB_GSO_REMCSUM. Fix it. Fixes: f7a6272bf3cb ("Documentation: Add documentation for TSO and GSO features") Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14docs: segmentation-offloads.txt: update for UFO depreciationDaniel Axtens1-0/+4
UFO is deprecated except for tuntap and packet per 0c19f846d582, ("net: accept UFO datagrams from tuntap and packet"). Update UFO docs to reflect this. Signed-off-by: Daniel Axtens <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14Merge branch 'tipc-locking-fixes'David S. Miller5-54/+91
Ying Xue says: ==================== tipc: Fix missing RTNL lock protection during setting link properties At present it's unsafe to configure link properties through netlink as the entire setting process is not under RTNL lock protection. Now TIPC supports two different sets of netlink APIs at the same time, and they share the same set of backend functions to configure bearer, media and net properties. In order to solve the missing RTNL issue, we have to make the whole __tipc_nl_compat_doit() protected by RTNL, which means any function called within it cannot take RTNL any more. So in the series we first introduce the following new functions which doesn't hold RTNl lock: - __tipc_nl_bearer_disable() - __tipc_nl_bearer_enable() - __tipc_nl_bearer_set() - __tipc_nl_media_set() - __tipc_nl_net_set() Meanwhile, __tipc_nl_compat_doit() has been reconstructed to minimize the time of holding RTNL lock. Changes in v4: - Per suggestion of Kirill Tkhai, divided original big one patch into seven small ones so that they can be easily reviewed. Changes in v3: - Optimized return method of __tipc_nl_bearer_enable() regarding the comments from David M and Kirill Tkhai - Moved the allocations of memory in __tipc_nl_compat_doit() out of RTNL lock to minimize the time of holding RTNL lock according to the suggestion of Kirill Tkhai. Changes in v2: - The whole operation of setting bearer/media properties has been protected under RTNL, as per feedback from David M. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-14tipc: Fix missing RTNL lock protection during setting link propertiesYing Xue1-6/+8
Currently when user changes link properties, TIPC first checks if user's command message contains media name or bearer name through tipc_media_find() or tipc_bearer_find() which is protected by RTNL lock. But when tipc_nl_compat_link_set() conducts the checking with the two functions, it doesn't hold RTNL lock at all, as a result, the following complaints were reported: audit: type=1400 audit(1514679888.244:9): avc: denied { write } for pid=3194 comm="syzkaller021477" path="socket:[11143]" dev="sockfs" ino=11143 scontext=unconfined_u:system_r:insmod_t:s0-s0:c0.c1023 tcontext=unconfined_u:system_r:insmod_t:s0-s0:c0.c1023 tclass=netlink_generic_socket permissive=1 Reviewed-by: Kirill Tkhai <[email protected]> ============================= WARNING: suspicious RCU usage 4.15.0-rc5+ #152 Not tainted ----------------------------- net/tipc/bearer.c:177 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by syzkaller021477/3194: #0: (cb_lock){++++}, at: [<00000000d20133ea>] genl_rcv+0x19/0x40 net/netlink/genetlink.c:634 #1: (genl_mutex){+.+.}, at: [<00000000fcc5d1bc>] genl_lock net/netlink/genetlink.c:33 [inline] #1: (genl_mutex){+.+.}, at: [<00000000fcc5d1bc>] genl_rcv_msg+0x115/0x140 net/netlink/genetlink.c:622 stack backtrace: CPU: 1 PID: 3194 Comm: syzkaller021477 Not tainted 4.15.0-rc5+ #152 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 lockdep_rcu_suspicious+0x123/0x170 kernel/locking/lockdep.c:4585 tipc_bearer_find+0x2b4/0x3b0 net/tipc/bearer.c:177 tipc_nl_compat_link_set+0x329/0x9f0 net/tipc/netlink_compat.c:729 __tipc_nl_compat_doit net/tipc/netlink_compat.c:288 [inline] tipc_nl_compat_doit+0x15b/0x660 net/tipc/netlink_compat.c:335 tipc_nl_compat_handle net/tipc/netlink_compat.c:1119 [inline] tipc_nl_compat_recv+0x112f/0x18f0 net/tipc/netlink_compat.c:1201 genl_family_rcv_msg+0x7b7/0xfb0 net/netlink/genetlink.c:599 genl_rcv_msg+0xb2/0x140 net/netlink/genetlink.c:624 netlink_rcv_skb+0x21e/0x460 net/netlink/af_netlink.c:2408 genl_rcv+0x28/0x40 net/netlink/genetlink.c:635 netlink_unicast_kernel net/netlink/af_netlink.c:1275 [inline] netlink_unicast+0x4e8/0x6f0 net/netlink/af_netlink.c:1301 netlink_sendmsg+0xa4a/0xe60 net/netlink/af_netlink.c:1864 sock_sendmsg_nosec net/socket.c:636 [inline] sock_sendmsg+0xca/0x110 net/socket.c:646 sock_write_iter+0x31a/0x5d0 net/socket.c:915 call_write_iter include/linux/fs.h:1772 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 do_syscall_32_irqs_on arch/x86/entry/common.c:327 [inline] do_fast_syscall_32+0x3ee/0xf9d arch/x86/entry/common.c:389 entry_SYSENTER_compat+0x54/0x63 arch/x86/entry/entry_64_compat.S:129 In order to correct the mistake, __tipc_nl_compat_doit() has been protected by RTNL lock, which means the whole operation of setting bearer/media properties is under RTNL protection. Signed-off-by: Ying Xue <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14tipc: Introduce __tipc_nl_net_setYing Xue2-3/+13
Introduce __tipc_nl_net_set() which doesn't hold RTNL lock. Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14tipc: Introduce __tipc_nl_media_setYing Xue2-9/+15
Introduce __tipc_nl_media_set() which doesn't hold RTNL lock. Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14tipc: Introduce __tipc_nl_bearer_setYing Xue2-9/+15
Introduce __tipc_nl_bearer_set() which doesn't holding RTNL lock. Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14tipc: Introduce __tipc_nl_bearer_enableYing Xue2-7/+11
Introduce __tipc_nl_bearer_enable() which doesn't hold RTNL lock. Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14tipc: Introduce __tipc_nl_bearer_disableYing Xue2-6/+14
Introduce __tipc_nl_bearer_disable() which doesn't hold RTNL lock. Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14tipc: Refactor __tipc_nl_compat_doitYing Xue1-14/+15
As preparation for adding RTNL to make (*cmd->transcode)() and (*cmd->transcode)() constantly protected by RTNL lock, we move out of memory allocations existing between them as many as possible so that the time of holding RTNL can be minimized in __tipc_nl_compat_doit(). Signed-off-by: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14drm/i915: Fix DSI panels with v1 MIPI sequences without a DEASSERT sequence v3Hans de Goede2-0/+85
So far models of the Dell Venue 8 Pro, with a panel with MIPI panel index = 3, one of which has been kindly provided to me by Jan Brummer, where not working with the i915 driver, giving a black screen on the first modeset. The problem with at least these Dells is that their VBT defines a MIPI ASSERT sequence, but not a DEASSERT sequence. Instead they DEASSERT the reset in their INIT_OTP sequence, but the deassert must be done before calling intel_dsi_device_ready(), so that is too late. Simply doing the INIT_OTP sequence earlier is not enough to fix this, because the INIT_OTP sequence also sends various MIPI packets to the panel, which can only happen after calling intel_dsi_device_ready(). This commit fixes this by splitting the INIT_OTP sequence into everything before the first DSI packet and everything else, including the first DSI packet. The first part (everything before the first DSI packet) is then used as deassert sequence. Changed in v2: -Split the init OTP sequence into a deassert reset and the actual init OTP sequence, instead of calling it earlier and then having the first mipi_exec_send_packet() call call intel_dsi_device_ready(). Changes in v3: -Move the whole shebang to intel_bios.c Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82880 References: https://bugs.freedesktop.org/show_bug.cgi?id=101205 Cc: Jan-Michael Brummer <[email protected]> Reported-by: Jan-Michael Brummer <[email protected]> Tested-by: Hans de Goede <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Acked-by: Jani Nikula <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit fb38e7ade9af4f3e96f5916c3f6f19bfc7d5f961) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-14drm/i915: Free memdup-ed DSI VBT data structures on driver_unloadHans de Goede1-0/+6
Make intel_bios_cleanup function free the DSI VBT data structures which are memdup-ed by parse_mipi_config() and parse_mipi_sequence(). Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit e1b86c85f6c2029c31dba99823b6f3d9e15eaacd) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-14drm/i915: Add intel_bios_cleanup() functionHans de Goede3-13/+17
Add an intel_bios_cleanup() function to act as counterpart of intel_bios_init() and move the cleanup of vbt related resources there, putting it in the same file as the allocation. Changed in v2: -While touching the code anyways, remove the unnecessary: if (dev_priv->vbt.child_dev) done before kfree(dev_priv->vbt.child_dev) Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 785f076b3ba781804f2b22b347b4431e3efb0ab3) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-14drm/i915/vlv: Add cdclk workaround for DSIHans de Goede1-0/+8
At least on the Chuwi Vi8 (non pro/plus) the LCD panel will show an image shifted aprox. 20% to the left (with wraparound) and sometimes also wrong colors, showing that the panel controller is starting with sampling the datastream somewhere mid-line. This happens after the first blanking and re-init of the panel. After looking at drm.debug output I noticed that initially we inherit the cdclk of 333333 KHz set by the GOP, but after the re-init we picked 266667 KHz, which turns out to be the cause of this problem, a quick hack to hard code the cdclk to 333333 KHz makes the problem go away. I've tested this on various Bay Trail devices, to make sure this not does cause regressions on other devices and the higher cdclk does not cause any problems on the following devices: -GP-electronic T701 1024x600 333333 KHz cdclk after this patch -PEAQ C1010 1920x1200 333333 KHz cdclk after this patch -PoV mobii-wintab-800w 800x1280 333333 KHz cdclk after this patch -Asus Transformer-T100TA 1368x768 320000 KHz cdclk after this patch Also interesting wrt this is the comment in vlv_calc_cdclk about the existing workaround to avoid 200 Mhz as clock because that causes issues in some cases. This commit extends the "do not use 200 Mhz" workaround with an extra check to require atleast 320000 KHz (avoiding 266667 KHz) when a DSI panel is active. Changes in v2: -Change the commit message and the code comment to not treat the GOP as a reference, the GOP should not be treated as a reference Acked-by: Ville Syrjälä <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit c8dae55a8ced625038d52d26e48273707fab2688) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-02-14Merge branch 'ibmvnic-leaks'David S. Miller1-1/+49
Thomas Falcon says: ==================== ibmvnic: Fix memory leaks in the driver This patch set is pretty self-explanatory. It includes a number of patches that fix memory leaks found with kmemleak in the ibmvnic driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-14ibmvnic: Clean RX pool buffers during device closeThomas Falcon1-1/+30
During device close or reset, there were some cases of outstanding RX socket buffers not being freed. Include a function similar to the one that already exists to clean TX socket buffers in this case. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14ibmvnic: Free RX socket buffer in case of adapter errorThomas Falcon1-0/+1
If a RX buffer is returned to the client driver with an error, free the corresponding socket buffer before continuing. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-14ibmvnic: Fix NAPI structures memory leakThomas Falcon1-0/+2
This memory is allocated during initialization but never freed, so do that now. Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.