| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 6.6
- Add support for TLB range invalidation of Stage-2 page tables,
avoiding unnecessary invalidations. Systems that do not implement
range invalidation still rely on a full invalidation when dealing
with large ranges.
- Add infrastructure for forwarding traps taken from a L2 guest to
the L1 guest, with L0 acting as the dispatcher, another baby step
towards the full nested support.
- Simplify the way we deal with the (long deprecated) 'CPU target',
resulting in a much needed cleanup.
- Fix another set of PMU bugs, both on the guest and host sides,
as we seem to never have any shortage of those...
- Relax the alignment requirements of EL2 VA allocations for
non-stack allocations, as we were otherwise wasting a lot of that
precious VA space.
- The usual set of non-functional cleanups, although I note the lack
of spelling fixes...
|
|
Recent commit [1] broke d_path test, because now filp_close is not called
directly from sys_close, but eventually later when the file is finally
released.
As suggested by Hou Tao we don't need to re-hook the bpf program, but just
instead we can use sys_close_range to trigger filp_close synchronously.
[1] 021a160abf62 ("fs: use __fput_sync in close(2)")
Suggested-by: Hou Tao <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
The num_fwd in MClientRequestForward is int32_t, while the num_fwd
in ceph_mds_request_head is __u8. This is buggy when the num_fwd
is larger than 256 it will always be truncate to 0 again. But the
client couldn't recoginize this.
This will make them to __u32 instead. Because the old cephs will
directly copy the raw memories when decoding the reqeust's head,
so we need to make sure this kclient will be compatible with old
cephs. For newer cephs they will decode the requests depending
the version, which will be much simpler and easier to extend new
members.
Link: https://tracker.ceph.com/issues/62145
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Alexander Mikhalitsyn <[email protected]>
Reviewed-by: Milind Changire <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
In ceph mainline it will allow to set the btime in the setattr request
and just add a 'btime' member in the union 'ceph_mds_request_args' and
then bump up the header version to 4. That means the total size of union
'ceph_mds_request_args' will increase sizeof(struct ceph_timespec) bytes,
but in kclient it will increase the sizeof(setattr_ext) bytes for each
request.
Since the MDS will always depend on the header's vesion and front_len
members to decode the 'ceph_mds_request_head' struct, at the same time
kclient hasn't supported the 'btime' feature yet in setattr request,
so it's safe to do this change here.
This will save 48 bytes memories for each request.
Fixes: 4f1ddb1ea874 ("ceph: implement updated ceph_mds_request_head structure")
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Milind Changire <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
The script bpf_doc.py generates multiple SyntaxWarnings related to invalid
escape sequences when executed with Python 3.12. These warnings do not appear
in Python 3.10 and 3.11 and do not affect the kernel build, which completes
successfully.
This patch resolves these SyntaxWarnings by converting the relevant string
literals to raw strings or by escaping backslashes. This ensures that
backslashes are interpreted as literal characters, eliminating the warnings.
Reported-by: Srikar Dronamraju <[email protected]>
Signed-off-by: Vishal Chourasia <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Quentin Monnet <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
ams.h uses struct platform_device, so the header should be used
to prevent build errors:
drivers/macintosh/ams/ams-input.c: In function 'ams_input_enable':
drivers/macintosh/ams/ams-input.c:68:45: error: invalid use of undefined type 'struct platform_device'
68 | input->dev.parent = &ams_info.of_dev->dev;
drivers/macintosh/ams/ams-input.c: In function 'ams_input_init':
drivers/macintosh/ams/ams-input.c:146:51: error: invalid use of undefined type 'struct platform_device'
146 | return device_create_file(&ams_info.of_dev->dev, &dev_attr_joystick);
drivers/macintosh/ams/ams-input.c: In function 'ams_input_exit':
drivers/macintosh/ams/ams-input.c:151:44: error: invalid use of undefined type 'struct platform_device'
151 | device_remove_file(&ams_info.of_dev->dev, &dev_attr_joystick);
drivers/macintosh/ams/ams-input.c: In function 'ams_input_init':
drivers/macintosh/ams/ams-input.c:147:1: error: control reaches end of non-void function [-Werror=return-type]
147 | }
Fixes: 233d687d1b78 ("macintosh: Explicitly include correct DT includes")
Signed-off-by: Randy Dunlap <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://msgid.link/[email protected]
|
|
Fix a use-after-free error that is possible if the xsk_diag interface
is used after the socket has been unbound from the device. This can
happen either due to the socket being closed or the device
disappearing. In the early days of AF_XDP, the way we tested that a
socket was not bound to a device was to simply check if the netdevice
pointer in the xsk socket structure was NULL. Later, a better system
was introduced by having an explicit state variable in the xsk socket
struct. For example, the state of a socket that is on the way to being
closed and has been unbound from the device is XSK_UNBOUND.
The commit in the Fixes tag below deleted the old way of signalling
that a socket is unbound, setting dev to NULL. This in the belief that
all code using the old way had been exterminated. That was
unfortunately not true as the xsk diagnostics code was still using the
old way and thus does not work as intended when a socket is going
down. Fix this by introducing a test against the state variable. If
the socket is in the state XSK_UNBOUND, simply abort the diagnostic's
netlink operation.
Fixes: 18b1ab7aa76b ("xsk: Fix race at socket teardown")
Reported-by: [email protected]
Signed-off-by: Magnus Karlsson <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: [email protected]
Tested-by: Maciej Fijalkowski <[email protected]>
Reviewed-by: Maciej Fijalkowski <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
NFS switch to open coding kill_anon_super in 7b14a213890a
("nfs: don't call bdi_unregister") to avoid the extra bdi_unregister
call. At that point bdi_destroy was called in nfs_free_server and
thus it required a later freeing of the anon dev_t. But since
0db10944a76b ("nfs: Convert to separately allocated bdi") the bdi has
been free implicitly by the sb destruction, so this isn't needed
anymore.
By not open coding kill_anon_super, nfs now inherits the fix in
dc3216b14160 ("super: ensure valid info"), and we remove the only
open coded version of kill_anon_super.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
The mtd driver has similar problems than the one that was fixed in
commit dc3216b14160 ("super: ensure valid info").
The kill_mtd_super() helper calls shuts the superblock down but leaves
the superblock on fs_supers as the devices are still in use but puts the
mtd device and cleans out the superblock's s_mtd field.
This means another mounter can find the superblock on the list accessing
its s_mtd field while it is curently in the process of being freed or
already freed.
Prevent that from happening by keying superblock by dev_t just as we do
in the generic code.
Link: https://lore.kernel.org/linux-fsdevel/20230829-weitab-lauwarm-49c40fc85863@brauner
Acked-by: Richard Weinberger <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
They will be used for mtd devices as well.
Acked-by: Richard Weinberger <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
|
|
New skbs allocated via nf_send_reset() have skb->dev == NULL.
fib*_rules_early_flow_dissect helpers already have a 'struct net'
argument but its not passed down to the flow dissector core, which
will then WARN as it can't derive a net namespace to use:
WARNING: CPU: 0 PID: 0 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0xa91/0x1cd0
[..]
ip_route_me_harder+0x143/0x330
nf_send_reset+0x17c/0x2d0 [nf_reject_ipv4]
nft_reject_inet_eval+0xa9/0xf2 [nft_reject_inet]
nft_do_chain+0x198/0x5d0 [nf_tables]
nft_do_chain_inet+0xa4/0x110 [nf_tables]
nf_hook_slow+0x41/0xc0
ip_local_deliver+0xce/0x110
..
Cc: Stanislav Fomichev <[email protected]>
Cc: David Ahern <[email protected]>
Cc: Ido Schimmel <[email protected]>
Fixes: 812fa71f0d96 ("netfilter: Dissect flow after packet mangling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217826
Signed-off-by: Florian Westphal <[email protected]>
Reviewed-by: Ido Schimmel <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
syzbot is playing with IPV6_ADDRFORM quite a lot these days,
and managed to hit the WARN_ON_ONCE(1) in sk_mc_loop()
We have many more similar issues to fix.
WARNING: CPU: 1 PID: 1593 at net/core/sock.c:782 sk_mc_loop+0x165/0x260
Modules linked in:
CPU: 1 PID: 1593 Comm: kworker/1:3 Not tainted 6.1.40-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Workqueue: events_power_efficient gc_worker
RIP: 0010:sk_mc_loop+0x165/0x260 net/core/sock.c:782
Code: 34 1b fd 49 81 c7 18 05 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 20 00 74 08 4c 89 ff e8 25 36 6d fd 4d 8b 37 eb 13 e8 db 33 1b fd <0f> 0b b3 01 eb 34 e8 d0 33 1b fd 45 31 f6 49 83 c6 38 4c 89 f0 48
RSP: 0018:ffffc90000388530 EFLAGS: 00010246
RAX: ffffffff846d9b55 RBX: 0000000000000011 RCX: ffff88814f884980
RDX: 0000000000000102 RSI: ffffffff87ae5160 RDI: 0000000000000011
RBP: ffffc90000388550 R08: 0000000000000003 R09: ffffffff846d9a65
R10: 0000000000000002 R11: ffff88814f884980 R12: dffffc0000000000
R13: ffff88810dbee000 R14: 0000000000000010 R15: ffff888150084000
FS: 0000000000000000(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 000000014ee5b000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
[<ffffffff8507734f>] ip6_finish_output2+0x33f/0x1ae0 net/ipv6/ip6_output.c:83
[<ffffffff85062766>] __ip6_finish_output net/ipv6/ip6_output.c:200 [inline]
[<ffffffff85062766>] ip6_finish_output+0x6c6/0xb10 net/ipv6/ip6_output.c:211
[<ffffffff85061f8c>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<ffffffff85061f8c>] ip6_output+0x2bc/0x3d0 net/ipv6/ip6_output.c:232
[<ffffffff852071cf>] dst_output include/net/dst.h:444 [inline]
[<ffffffff852071cf>] ip6_local_out+0x10f/0x140 net/ipv6/output_core.c:161
[<ffffffff83618fb4>] ipvlan_process_v6_outbound drivers/net/ipvlan/ipvlan_core.c:483 [inline]
[<ffffffff83618fb4>] ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:529 [inline]
[<ffffffff83618fb4>] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline]
[<ffffffff83618fb4>] ipvlan_queue_xmit+0x1174/0x1be0 drivers/net/ipvlan/ipvlan_core.c:677
[<ffffffff8361ddd9>] ipvlan_start_xmit+0x49/0x100 drivers/net/ipvlan/ipvlan_main.c:229
[<ffffffff84763fc0>] netdev_start_xmit include/linux/netdevice.h:4925 [inline]
[<ffffffff84763fc0>] xmit_one net/core/dev.c:3644 [inline]
[<ffffffff84763fc0>] dev_hard_start_xmit+0x320/0x980 net/core/dev.c:3660
[<ffffffff8494c650>] sch_direct_xmit+0x2a0/0x9c0 net/sched/sch_generic.c:342
[<ffffffff8494d883>] qdisc_restart net/sched/sch_generic.c:407 [inline]
[<ffffffff8494d883>] __qdisc_run+0xb13/0x1e70 net/sched/sch_generic.c:415
[<ffffffff8478c426>] qdisc_run+0xd6/0x260 include/net/pkt_sched.h:125
[<ffffffff84796eac>] net_tx_action+0x7ac/0x940 net/core/dev.c:5247
[<ffffffff858002bd>] __do_softirq+0x2bd/0x9bd kernel/softirq.c:599
[<ffffffff814c3fe8>] invoke_softirq kernel/softirq.c:430 [inline]
[<ffffffff814c3fe8>] __irq_exit_rcu+0xc8/0x170 kernel/softirq.c:683
[<ffffffff814c3f09>] irq_exit_rcu+0x9/0x20 kernel/softirq.c:695
Fixes: 7ad6848c7e81 ("ip: fix mc_loop checks for tunnels with multicast outer addresses")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
syzbot complained about a data-race in fib_table_lookup() [1]
Add appropriate annotations to document it.
[1]
BUG: KCSAN: data-race in fib_release_info / fib_table_lookup
write to 0xffff888150f31744 of 1 bytes by task 1189 on cpu 0:
fib_release_info+0x3a0/0x460 net/ipv4/fib_semantics.c:281
fib_table_delete+0x8d2/0x900 net/ipv4/fib_trie.c:1777
fib_magic+0x1c1/0x1f0 net/ipv4/fib_frontend.c:1106
fib_del_ifaddr+0x8cf/0xa60 net/ipv4/fib_frontend.c:1317
fib_inetaddr_event+0x77/0x200 net/ipv4/fib_frontend.c:1448
notifier_call_chain kernel/notifier.c:93 [inline]
blocking_notifier_call_chain+0x90/0x200 kernel/notifier.c:388
__inet_del_ifa+0x4df/0x800 net/ipv4/devinet.c:432
inet_del_ifa net/ipv4/devinet.c:469 [inline]
inetdev_destroy net/ipv4/devinet.c:322 [inline]
inetdev_event+0x553/0xaf0 net/ipv4/devinet.c:1606
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1962 [inline]
call_netdevice_notifiers_mtu+0xd2/0x130 net/core/dev.c:2037
dev_set_mtu_ext+0x30b/0x3e0 net/core/dev.c:8673
do_setlink+0x5be/0x2430 net/core/rtnetlink.c:2837
rtnl_setlink+0x255/0x300 net/core/rtnetlink.c:3177
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6445
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2549
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6463
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
sock_write_iter+0x1aa/0x230 net/socket.c:1129
do_iter_write+0x4b4/0x7b0 fs/read_write.c:860
vfs_writev+0x1a8/0x320 fs/read_write.c:933
do_writev+0xf8/0x220 fs/read_write.c:976
__do_sys_writev fs/read_write.c:1049 [inline]
__se_sys_writev fs/read_write.c:1046 [inline]
__x64_sys_writev+0x45/0x50 fs/read_write.c:1046
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888150f31744 of 1 bytes by task 21839 on cpu 1:
fib_table_lookup+0x2bf/0xd50 net/ipv4/fib_trie.c:1585
fib_lookup include/net/ip_fib.h:383 [inline]
ip_route_output_key_hash_rcu+0x38c/0x12c0 net/ipv4/route.c:2751
ip_route_output_key_hash net/ipv4/route.c:2641 [inline]
__ip_route_output_key include/net/route.h:134 [inline]
ip_route_output_flow+0xa6/0x150 net/ipv4/route.c:2869
send4+0x1e7/0x500 drivers/net/wireguard/socket.c:61
wg_socket_send_skb_to_peer+0x94/0x130 drivers/net/wireguard/socket.c:175
wg_socket_send_buffer_to_peer+0xd6/0x100 drivers/net/wireguard/socket.c:200
wg_packet_send_handshake_initiation drivers/net/wireguard/send.c:40 [inline]
wg_packet_handshake_send_worker+0x10c/0x150 drivers/net/wireguard/send.c:51
process_one_work+0x434/0x860 kernel/workqueue.c:2600
worker_thread+0x5f2/0xa10 kernel/workqueue.c:2751
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
value changed: 0x00 -> 0x01
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 21839 Comm: kworker/u4:18 Tainted: G W 6.5.0-syzkaller #0
Fixes: dccd9ecc3744 ("ipv4: Do not use dead fib_info entries.")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
sk->sk_wmem_queued can be read locklessly from sctp_poll()
Use sk_wmem_queued_add() when the field is changed,
and add READ_ONCE() annotations in sctp_writeable()
and sctp_assocs_seq_show()
syzbot reported:
BUG: KCSAN: data-race in sctp_poll / sctp_wfree
read-write to 0xffff888149d77810 of 4 bytes by interrupt on cpu 0:
sctp_wfree+0x170/0x4a0 net/sctp/socket.c:9147
skb_release_head_state+0xb7/0x1a0 net/core/skbuff.c:988
skb_release_all net/core/skbuff.c:1000 [inline]
__kfree_skb+0x16/0x140 net/core/skbuff.c:1016
consume_skb+0x57/0x180 net/core/skbuff.c:1232
sctp_chunk_destroy net/sctp/sm_make_chunk.c:1503 [inline]
sctp_chunk_put+0xcd/0x130 net/sctp/sm_make_chunk.c:1530
sctp_datamsg_put+0x29a/0x300 net/sctp/chunk.c:128
sctp_chunk_free+0x34/0x50 net/sctp/sm_make_chunk.c:1515
sctp_outq_sack+0xafa/0xd70 net/sctp/outqueue.c:1381
sctp_cmd_process_sack net/sctp/sm_sideeffect.c:834 [inline]
sctp_cmd_interpreter net/sctp/sm_sideeffect.c:1366 [inline]
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x12c7/0x31b0 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x2b2/0x430 net/sctp/associola.c:1051
sctp_inq_push+0x108/0x120 net/sctp/inqueue.c:80
sctp_rcv+0x116e/0x1340 net/sctp/input.c:243
sctp6_rcv+0x25/0x40 net/sctp/ipv6.c:1120
ip6_protocol_deliver_rcu+0x92f/0xf30 net/ipv6/ip6_input.c:437
ip6_input_finish net/ipv6/ip6_input.c:482 [inline]
NF_HOOK include/linux/netfilter.h:303 [inline]
ip6_input+0xbd/0x1b0 net/ipv6/ip6_input.c:491
dst_input include/net/dst.h:468 [inline]
ip6_rcv_finish+0x1e2/0x2e0 net/ipv6/ip6_input.c:79
NF_HOOK include/linux/netfilter.h:303 [inline]
ipv6_rcv+0x74/0x150 net/ipv6/ip6_input.c:309
__netif_receive_skb_one_core net/core/dev.c:5452 [inline]
__netif_receive_skb+0x90/0x1b0 net/core/dev.c:5566
process_backlog+0x21f/0x380 net/core/dev.c:5894
__napi_poll+0x60/0x3b0 net/core/dev.c:6460
napi_poll net/core/dev.c:6527 [inline]
net_rx_action+0x32b/0x750 net/core/dev.c:6660
__do_softirq+0xc1/0x265 kernel/softirq.c:553
run_ksoftirqd+0x17/0x20 kernel/softirq.c:921
smpboot_thread_fn+0x30a/0x4a0 kernel/smpboot.c:164
kthread+0x1d7/0x210 kernel/kthread.c:389
ret_from_fork+0x2e/0x40 arch/x86/kernel/process.c:145
ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304
read to 0xffff888149d77810 of 4 bytes by task 17828 on cpu 1:
sctp_writeable net/sctp/socket.c:9304 [inline]
sctp_poll+0x265/0x410 net/sctp/socket.c:8671
sock_poll+0x253/0x270 net/socket.c:1374
vfs_poll include/linux/poll.h:88 [inline]
do_pollfd fs/select.c:873 [inline]
do_poll fs/select.c:921 [inline]
do_sys_poll+0x636/0xc00 fs/select.c:1015
__do_sys_ppoll fs/select.c:1121 [inline]
__se_sys_ppoll+0x1af/0x1f0 fs/select.c:1101
__x64_sys_ppoll+0x67/0x80 fs/select.c:1101
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00019e80 -> 0x0000cc80
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 17828 Comm: syz-executor.1 Not tainted 6.5.0-rc7-syzkaller-00185-g28f20a19294d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Marcelo Ricardo Leitner <[email protected]>
Acked-by: Xin Long <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When setting a high number of flows (limit being 65536),
fq_pie_timer() is currently using too much time as syzbot reported.
Add logic to yield the cpu every 2048 flows (less than 150 usec
on debug kernels).
It should also help by not blocking qdisc fast paths for too long.
Worst case (65536 flows) would need 31 jiffies for a complete scan.
Relevant extract from syzbot report:
rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-.... } 2663 jiffies s: 873 root: 0x1/.
rcu: blocking rcu_node structures (internal RCU debug):
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 5177 Comm: syz-executor273 Not tainted 6.5.0-syzkaller-00453-g727dbda16b83 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline]
RIP: 0010:write_comp_data+0x21/0x90 kernel/kcov.c:236
Code: 2e 0f 1f 84 00 00 00 00 00 65 8b 05 01 b2 7d 7e 49 89 f1 89 c6 49 89 d2 81 e6 00 01 00 00 49 89 f8 65 48 8b 14 25 80 b9 03 00 <a9> 00 01 ff 00 74 0e 85 f6 74 59 8b 82 04 16 00 00 85 c0 74 4f 8b
RSP: 0018:ffffc90000007bb8 EFLAGS: 00000206
RAX: 0000000000000101 RBX: ffffc9000dc0d140 RCX: ffffffff885893b0
RDX: ffff88807c075940 RSI: 0000000000000100 RDI: 0000000000000001
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffc9000dc0d178
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000555555d54380(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b442f6130 CR3: 000000006fe1c000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<IRQ>
pie_calculate_probability+0x480/0x850 net/sched/sch_pie.c:415
fq_pie_timer+0x1da/0x4f0 net/sched/sch_fq_pie.c:387
call_timer_fn+0x1a0/0x580 kernel/time/timer.c:1700
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler")
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: [email protected]
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Michal Kubiak <[email protected]>
Reviewed-by: Jamal Hadi Salim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Apple devices fixes by Nimish Gåtam and Nils Tonnaett
|
|
Drop error checking for debugfs_create_file in the wiimote driver
by Osama Muhammad
|
|
Battery fixes by Aaron Armstrong Skomra
|
|
Add support for the Steelseries Arctis 1 XBox headset by Bastien Nocera
|
|
Allow multi-function sensor devices in sensor-hub by Daniel Thompson
|
|
Constify class struct by Ivan Orlov and Greg Kroah-Hartman
|
|
LED fixes and Battery support for the Nvidia Shield by
Rahul Rameshbabu
|
|
Various new device ID addition and a couple of HID++
fixes to tackle the last few opened bugs (Nikita Zhandarovich
and Benjamin Tissoires)
|
|
Add support for Google Stadia force feedback by Fabio Baltieri
|
|
Make use of panel follower for the Ilitek ili9882t
driver by Cong Yang
|
|
Some docs explaining how HID works by Marco Morandini
|
|
Fix a wrong devm attachment to the input device which
now triggers a use after free with a recent devm change
by Rahul Rameshbabu.
|
|
Cleanup of the hid-cp2112 driver by Andy Shevchenko
|
|
When building for ARCH=riscv using LLVM < 14, there is an error with
CONFIG_DEBUG_INFO_SPLIT=y:
error: A dwo section may not contain relocations
This was worked around in LLVM 15 by disallowing '-gsplit-dwarf' with
'-mrelax' (the default), so CONFIG_DEBUG_INFO_SPLIT is not selectable
with newer versions of LLVM:
$ clang --target=riscv64-linux-gnu -gsplit-dwarf -c -o /dev/null -x c /dev/null
clang: error: -gsplit-dwarf is unsupported with RISC-V linker relaxation (-mrelax)
GCC silently had a similar issue that was resolved with GCC 12.x.
Restrict CONFIG_DEBUG_INFO_SPLIT for RISC-V when using LLVM or GCC <
12.x to avoid these known issues.
Link: https://github.com/ClangBuiltLinux/linux/issues/1914
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99090
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Fangrui Song <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Charlie Jenkins <[email protected]> says:
Make sv48 the default address space for mmap as some applications
currently depend on this assumption. Users can now select a
desired address space using a non-zero hint address to mmap. Previously,
requesting the default address space from mmap by passing zero as the hint
address would result in using the largest address space possible. Some
applications depend on empty bits in the virtual address space, like Go and
Java, so this patch provides more flexibility for application developers.
* b4-shazam-merge:
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Jisheng Zhang <[email protected]> says:
Currently, riscv defines ARCH_DMA_MINALIGN as L1_CACHE_BYTES, I.E
64Bytes, if CONFIG_RISCV_DMA_NONCOHERENT=y. To support unified kernel
Image, usually we have to enable CONFIG_RISCV_DMA_NONCOHERENT, thus
it brings some bad effects to coherent platforms:
Firstly, it wastes memory, kmalloc-96, kmalloc-32, kmalloc-16 and
kmalloc-8 slab caches don't exist any more, they are replaced with
either kmalloc-128 or kmalloc-64.
Secondly, larger than necessary kmalloc aligned allocations results
in unnecessary cache/TLB pressure.
This issue also exists on arm64 platforms. From last year, Catalin
tried to solve this issue by decoupling ARCH_KMALLOC_MINALIGN from
ARCH_DMA_MINALIGN, limiting kmalloc() minimum alignment to
dma_get_cache_alignment() and replacing ARCH_KMALLOC_MINALIGN usage
in various drivers with ARCH_DMA_MINALIGN etc.[1]
One fact we can make use of for riscv: if the CPU doesn't support
ZICBOM or T-HEAD CMO, we know the platform is coherent. Based on
Catalin's work and above fact, we can easily solve the kmalloc align
issue for riscv: we can override dma_get_cache_alignment(), then let
it return ARCH_DMA_MINALIGN at the beginning and return 1 once we know
the underlying HW neither supports ZICBOM nor supports T-HEAD CMO.
So what about if the CPU supports ZICBOM or T-HEAD CMO, but all the
devices are dma coherent? Well, we use ARCH_DMA_MINALIGN as the
kmalloc minimum alignment, nothing changed in this case. This case
can be improved in the future once we see such platforms in mainline.
After this patch, a simple test of booting to a small buildroot rootfs
on qemu shows:
kmalloc-96 5041 5041 96 ...
kmalloc-64 9606 9606 64 ...
kmalloc-32 5128 5128 32 ...
kmalloc-16 7682 7682 16 ...
kmalloc-8 10246 10246 8 ...
So we save about 1268KB memory. The saving will be much larger in normal
OS env on real HW platforms.
patch1 allows kmalloc() caches aligned to the smallest value.
patch2 enables DMA_BOUNCE_UNALIGNED_KMALLOC.
After this series:
As for coherent platforms, kmalloc-{8,16,32,96} caches come back on
coherent both RV32 and RV64 platforms, I.E !ZICBOM and !THEAD_CMO.
As for noncoherent RV32 platforms, nothing changed.
As for noncoherent RV64 platforms, I.E either ZICBOM or THEAD_CMO, the
above kmalloc caches also come back if > 4GB memory or users pass
"swiotlb=mmnn,force" to force swiotlb creation if <= 4GB memory. How
much mmnn should be depends on the specific platform, it needs to be
tried and tested all possible usage case on the specific hardware. For
example, I can use the minimal I/O TLB slabs on Sipeed M1S Dock.
* b4-shazam-merge:
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/ [1]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Currently, each architecture can support PREEMPT_DYNAMIC through
either static calls or static keys. To support PREEMPT_DYNAMIC on
riscv, we face three choices:
1. only add static calls support to riscv
As Mark pointed out in commit 99cf983cc8bc ("sched/preempt: Add
PREEMPT_DYNAMIC using static keys"), static keys "...should have
slightly lower overhead than non-inline static calls, as this
effectively inlines each trampoline into the start of its callee. This
may avoid redundant work, and may integrate better with CFI schemes."
So even we add static calls(without inline static calls) to riscv,
static keys is still a better choice.
2. add static calls and inline static calls to riscv
Per my understanding, inline static calls requires objtool support
which is not easy.
3. use static keys
While riscv doesn't have static calls support, it supports static keys
perfectly. So this patch selects HAVE_PREEMPT_DYNAMIC_KEY to enable
support for PREEMPT_DYNAMIC on riscv, so that the preemption model can
be chosen at boot time. It also patches asm-generic/preempt.h, mainly
to add __preempt_schedule() and __preempt_schedule_notrace() macros
for PREEMPT_DYNAMIC case. Other architectures which use generic
preempt.h can also benefit from this patch by simply selecting
HAVE_PREEMPT_DYNAMIC_KEY to enable PREEMPT_DYNAMIC if they supports
static keys.
Signed-off-by: Jisheng Zhang <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Greg Ungerer <[email protected]> says:
The following changes add the ability to run ELF format binaries when
running RISC-V in nommu mode. That support is actually part of the
ELF-FDPIC loader, so these changes are all about making that work on
RISC-V.
The first issue to deal with is making the ELF-FDPIC loader capable of
handling 64-bit ELF files. As coded right now it only supports 32-bit
ELF files.
Secondly some changes are required to enable and compile the ELF-FDPIC
loader on RISC-V and to pass the ELF-FDPIC mapping addresses through to
user space when execing the new program.
These changes have not been used to run actual ELF-FDPIC binaries.
It is used to load and run normal ELF - compiled -pie format. Though the
underlying changes are expected to work with full ELF-FDPIC binaries if
or when that is supported on RISC-V in gcc.
To avoid needing changes to the C-library (tested with uClibc-ng
currently) there is a simple runtime dynamic loader (interpreter)
available to do the final relocations, https://github.com/gregungerer/uldso.
The nice thing about doing it this way is that the same program
binary can also be loaded with the usual ELF loader in MMU linux.
The motivation here is to provide an easy to use alternative to the
flat format binaries normally used for RISC-V nommu based systems.
* b4-shazam-merge:
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Sami Tolvanen <[email protected]> says:
This series adds KCFI support for RISC-V. KCFI is a fine-grained
forward-edge control-flow integrity scheme supported in Clang >=16,
which ensures indirect calls in instrumented code can only branch to
functions whose type matches the function pointer type, thus making
code reuse attacks more difficult.
Patch 1 implements a pt_regs based syscall wrapper to address
function pointer type mismatches in syscall handling. Patches 2 and 3
annotate indirectly called assembly functions with CFI types. Patch 4
implements error handling for indirect call checks. Patch 5 disables
CFI for arch/riscv/purgatory. Patch 6 finally allows CONFIG_CFI_CLANG
to be enabled for RISC-V.
Note that Clang 16 has a generic architecture-agnostic KCFI
implementation, which does work with the kernel, but doesn't produce
a stable code sequence for indirect call checks, which means
potential failures just trap and won't result in informative error
messages. Clang 17 includes a RISC-V specific back-end implementation
for KCFI, which emits a predictable code sequence for the checks and a
.kcfi_traps section with locations of the traps, which patch 5 uses to
produce more useful errors.
The type mismatch fixes and annotations in the first three patches
also become necessary in future if the kernel decides to support
fine-grained CFI implemented using the hardware landing pad
feature proposed in the in-progress Zicfisslp extension. Once the
specification is ratified and hardware support emerges, implementing
runtime patching support that replaces KCFI instrumentation with
Zicfisslp landing pads might also be feasible (similarly to KCFI to
FineIBT patching on x86_64), allowing distributions to ship a unified
kernel binary for all devices.
* b4-shazam-merge:
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
riscv: Implement syscall wrappers
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
This function is only used at boot time so mark it as __init.
Fixes: 96f9d4daf745 ("riscv: Rework kasan population functions")
Signed-off-by: Alexandre Ghiti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
tmp_pg_dir, tmp_p4d and tmp_pud are only used in kasan_init.c so they
should be declared as static.
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Fixes: 96f9d4daf745 ("riscv: Rework kasan population functions")
Signed-off-by: Alexandre Ghiti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
bitmap_zero() is faster than bitmap_clear(), so use bitmap_zero()
instead of bitmap_clear().
Signed-off-by: Ye Xingchen <[email protected]>
Reviewed-by: Anup Patel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Chen Jiahao <[email protected]> says:
On riscv, the current crash kernel allocation logic is trying to
allocate within 32bit addressible memory region by default, if
failed, try to allocate without 4G restriction.
In need of saving DMA zone memory while allocating a relatively large
crash kernel region, allocating the reserved memory top down in
high memory, without overlapping the DMA zone, is a mature solution.
Hence this patchset introduces the parameter option crashkernel=X,[high,low].
One can reserve the crash kernel from high memory above DMA zone range
by explicitly passing "crashkernel=X,high"; or reserve a memory range
below 4G with "crashkernel=X,low". Besides, there are few rules need
to take notice:
1. "crashkernel=X,[high,low]" will be ignored if "crashkernel=size"
is specified.
2. "crashkernel=X,low" is valid only when "crashkernel=X,high" is passed
and there is enough memory to be allocated under 4G.
3. When allocating crashkernel above 4G and no "crashkernel=X,low" is
specified, a 128M low memory will be allocated automatically for
swiotlb bounce buffer.
See Documentation/admin-guide/kernel-parameters.txt for more information.
To verify loading the crashkernel, adapted kexec-tools is attached below:
https://github.com/chenjh005/kexec-tools/tree/build-test-riscv-v2
Following test cases have been performed as expected:
1) crashkernel=256M //low=256M
2) crashkernel=1G //low=1G
3) crashkernel=4G //high=4G, low=128M(default)
4) crashkernel=4G crashkernel=256M,high //high=4G, low=128M(default), high is ignored
5) crashkernel=4G crashkernel=256M,low //high=4G, low=128M(default), low is ignored
6) crashkernel=4G,high //high=4G, low=128M(default)
7) crashkernel=256M,low //low=0M, invalid
8) crashkernel=4G,high crashkernel=256M,low //high=4G, low=256M
9) crashkernel=4G,high crashkernel=4G,low //high=0M, low=0M, invalid
10) crashkernel=512M@0xd0000000 //low=512M
11) crashkernel=1G,high crashkernel=0M,low //high=1G, low=0M
* b4-shazam-merge:
docs: kdump: Update the crashkernel description for riscv
riscv: kdump: Implement crashkernel=X,[high,low]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Nam Cao <[email protected]> says:
Simulate some currently rejected instructions. Still to be simulated are:
- c.jal
- c.ebreak
* b4-shazam-merge:
riscv: kprobes: simulate c.beqz and c.bnez
riscv: kprobes: simulate c.jr and c.jalr instructions
riscv: kprobes: simulate c.j instruction
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Allow to force all function address 64B aligned as it is possible for
other architectures. This may be useful when verify if performance
bump is caused by function alignment changes.
Before commit 1bf18da62106 ("lib/Kconfig.debug: add ARCH dependency
for FUNCTION_ALIGN option"), riscv supports enabling the
DEBUG_FORCE_FUNCTION_ALIGN_64B option, but after that commit, each
arch needs to claim the support explicitly.
Signed-off-by: Jisheng Zhang <[email protected]>
Reviewed-by: Conor Dooley <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
Some mv instructions were useful when first introduced to preserve a0 and
a1 before function calls. However the code has changed and they are now
redundant. Remove them.
Signed-off-by: Nam Cao <[email protected]>
Reviewed-by: Alexandre Ghiti <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull smb client updates from Steve French:
- fixes for excessive stack usage
- multichannel reconnect improvements
- DFS fix and cleanup patches
- move UCS-2 conversion code to fs/nls and update cifs and jfs to use
them
- cleanup patch for compounding, one to fix confusing function name
- inode number collision fix
- reparse point fixes (including avoiding an extra unneeded query on
symlinks) and a minor cleanup
- directory lease (caching) improvement
* tag '6.6-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (24 commits)
fs/jfs: Use common ucs2 upper case table
fs/smb/client: Use common code in client
fs/smb: Swing unicode common code from smb->NLS
fs/smb: Remove unicode 'lower' tables
SMB3: rename macro CIFS_SERVER_IS_CHAN to avoid confusion
[SMB3] send channel sequence number in SMB3 requests after reconnects
cifs: update desired access while requesting for directory lease
smb: client: reduce stack usage in smb2_query_reparse_point()
smb: client: reduce stack usage in smb2_query_info_compound()
smb: client: reduce stack usage in smb2_set_ea()
smb: client: reduce stack usage in smb_send_rqst()
smb: client: reduce stack usage in cifs_demultiplex_thread()
smb: client: reduce stack usage in cifs_try_adding_channels()
smb: cilent: set reparse mount points as automounts
smb: client: query reparse points in older dialects
smb: client: do not query reparse points twice on symlinks
smb: client: parse reparse point flag in create response
smb: client: get rid of dfs code dep in namespace.c
smb: client: get rid of dfs naming in automount code
smb: client: rename cifs_dfs_ref.c to namespace.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull nvdimm updates from Dave Jiang:
"This is mostly small cleanups, fixes, and with a change to prevent
zero-sized namespace exposed to user for nvdimm.
Summary:
- kstrtobool() conversion for nvdimm
- Add REQ_OP_WRITE for virtio_pmem
- Header files update for of_pmem
- Restrict zero-sized namespace from being exposed to user
- Avoid unnecessary endian conversion
- Fix mem leak in nvdimm pmu
- Fix dereference after free in nvdimm pmu"
* tag 'libnvdimm-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Fix dereference after free in register_nvdimm_pmu()
nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
nvdimm/pfn_dev: Avoid unnecessary endian conversion
nvdimm/pfn_dev: Prevent the creation of zero-sized namespaces
nvdimm: Explicitly include correct DT includes
virtio_pmem: add the missing REQ_OP_WRITE for flush bio
nvdimm: Use kstrtobool() instead of strtobool()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"On top of the vfio updates is built some new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that
hold the translation mapping. This is the basic functionality for
the normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors
when emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
that owns a VFIO device. This includes support for the Intel iommu,
and patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kernel APIs: iommufd_ctx_has_group(),
iommufd_device_to_ictx(), iommufd_device_to_id(),
iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some
per-group data
- Reorganize how the internal hwpt allocation flows to have more
robust locking
- Improve the access interfaces to support detach and replace of an
IOAS from an access
- New selftests and a rework of how the selftests creates a mock
iommu driver to be more like a real iommu driver"
Link: https://lore.kernel.org/lkml/ZO%[email protected]/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
iommufd/selftest: Don't leak the platform device memory when unloading the module
iommu/vt-d: Implement hw_info for iommu capability query
iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
iommufd: Add IOMMU_GET_HW_INFO
iommu: Add new iommu op to get iommu hardware information
iommu: Move dev_iommu_ops() to private header
iommufd: Remove iommufd_ref_to_users()
iommufd/selftest: Make the mock iommu driver into a real driver
vfio: Support IO page table replacement
iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
iommufd: Add iommufd_access_replace() API
iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
iommufd: Add iommufd_access_change_ioas(_id) helpers
iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
iommufd/selftest: Return the real idev id from selftest mock_domain
iommufd: Add IOMMU_HWPT_ALLOC
iommufd/selftest: Test iommufd_device_replace()
iommufd: Make destroy_rwsem use a lock class per object type
...
|
|
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Add locking to read/modify/write PCIe Capability Register accessors
for Link Control and Root Control
- Use pci_dev_id() when possible instead of manually composing ID
from dev->bus->number and dev->devfn
Resource management:
- Move prototypes for __weak sysfs resource files to linux/pci.h to
fix 'no previous prototype' warnings
- Make more I/O port accesses depend on HAS_IOPORT
- Use devm_platform_get_and_ioremap_resource() instead of open-coding
platform_get_resource() followed by devm_ioremap_resource()
Power management:
- Ensure devices are powered up while accessing VPD
- If device is powered-up, keep it that way while polling for PME
- Only read PCI_PM_CTRL register when available, to avoid reading the
wrong register and corrupting dev->current_state
Virtualization:
- Avoid Secondary Bus Reset on NVIDIA T4 GPUs
Error handling:
- Remove unused pci_disable_pcie_error_reporting()
- Unexport pci_enable_pcie_error_reporting(), used only by aer.c
- Unexport pcie_port_bus_type, used only by PCI core
VGA:
- Simplify and clean up typos in VGA arbiter
Apple PCIe controller driver:
- Initialize pcie->nvecs (number of available MSIs) before use
Broadcom iProc PCIe controller driver:
- Use of_property_read_bool() instead of low-level accessors for
boolean properties
Broadcom STB PCIe controller driver:
- Assert PERST# when probing BCM2711 because some bootloaders don't
do it
Freescale i.MX6 PCIe controller driver:
- Add .host_deinit() callback so we can clean up things like
regulators on probe failure or driver unload
Freescale Layerscape PCIe controller driver:
- Add support for link-down notification so the endpoint driver can
process LINK_DOWN events
- Add suspend/resume support, including manual
PME_Turn_off/PME_TO_Ack handshake
- Save Link Capabilities during probe so they can be restored when
handling a link-up event, since the controller loses the Link Width
and Link Speed values during reset
Intel VMD host bridge driver:
- Fix disable of bridge windows during domain reset; previously we
cleared the base/limit registers, which actually left the windows
enabled
Marvell MVEBU PCIe controller driver:
- Remove unused busn member
Microchip PolarFlare PCIe controller driver:
- Fix interrupt bit definitions so the SEC and DED interrupt handlers
work correctly
- Make driver buildable as a module
- Read FPGA MSI configuration parameters from hardware instead of
hard-coding them
Microsoft Hyper-V host bridge driver:
- To avoid a NULL pointer dereference, skip MSI restore after
hibernate if MSI/MSI-X hasn't been enabled
NVIDIA Tegra194 PCIe controller driver:
- Revert 'PCI: tegra194: Enable support for 256 Byte payload' because
Linux doesn't know how to reduce MPS from to 256 to 128 bytes for
endpoints below a switch (because other devices below the switch
might already be operating), which leads to 'Malformed TLP' errors
Qualcomm PCIe controller driver:
- Add DT and driver support for interconnect bandwidth voting for
'pcie-mem' and 'cpu-pcie' interconnects
- Fix broken SDX65 'compatible' DT property
- Configure controller so MHI bus master clock will be switched off
while in ASPM L1.x states
- Use alignment restriction from EPF core in EPF MHI driver
- Add Endpoint eDMA support
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driversupport
- Add MHI eDMA support
- Add Snapdragon SM8450 support to the EPF MHI driver
- Use iATU for EPF MHI transfers smaller than 4K to avoid eDMA setup
latency
- Add sa8775p DT binding and driver support
Rockchip PCIe controller driver:
- Use 64-bit mask on MSI 64-bit PCI address to avoid zeroing out the
upper 32 bits
SiFive FU740 PCIe controller driver:
- Set the supported number of MSI vectors so we can use all available
MSI interrupts
Synopsys DesignWare PCIe controller driver:
- Add generic dwc suspend/resume APIs (dw_pcie_suspend_noirq() and
dw_pcie_resume_noirq()) to be called by controller driver
suspend/resume ops, and a controller callback to send PME_Turn_Off
MicroSemi Switchtec management driver:
- Add support for PCIe Gen5 devices
Miscellaneous:
- Reorder and compress to reduce size of struct pci_dev
- Fix race in DOE destroy_work_on_stack()
- Add stubs to avoid casts between incompatible function types
- Explicitly include correct DT includes to untangle headers"
* tag 'pci-v6.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (96 commits)
PCI: qcom-ep: Add ICC bandwidth voting support
dt-bindings: PCI: qcom: ep: Add interconnects path
PCI: qcom-ep: Treat unknown IRQ events as an error
dt-bindings: PCI: qcom: Fix SDX65 compatible
PCI: endpoint: Add kernel-doc for pci_epc_mem_init() API
PCI: epf-mhi: Use iATU for small transfers
PCI: epf-mhi: Add support for SM8450
PCI: epf-mhi: Add eDMA support
PCI: qcom-ep: Add eDMA support
PCI: epf-mhi: Make use of the alignment restriction from EPF core
PCI/PM: Only read PCI_PM_CTRL register when available
PCI: qcom: Add support for sa8775p SoC
dt-bindings: PCI: qcom: Add sa8775p compatible
PCI: qcom-ep: Pass alignment restriction to the EPF core
PCI: Simplify pcie_capability_clear_and_set_word() control flow
PCI: Tidy config space save/restore messages
PCI: Fix code formatting inconsistencies
PCI: Fix typos in docs and comments
PCI: Fix pci_bus_resetable(), pci_slot_resetable() name typos
PCI: Simplify pci_dev_driver()
...
|
|
Pull documentation updates from Jonathan Corbet:
"Documentation work keeps chugging along; this includes:
- Work from Carlos Bilbao to integrate rustdoc output into the
generated HTML documentation. This took some work to figure out how
to do it without slowing the docs build and without creating people
who don't have Rust installed, but Carlos got there
- Move the loongarch and mips architecture documentation under
Documentation/arch/
- Some more maintainer documentation from Jakub
... plus the usual assortment of updates, translations, and fixes"
* tag 'docs-6.6' of git://git.lwn.net/linux: (56 commits)
Docu: genericirq.rst: fix irq-example
input: docs: pxrc: remove reference to phoenix-sim
Documentation: serial-console: Fix literal block marker
docs/mm: remove references to hmm_mirror ops and clean typos
docs/zh_CN: correct regi_chg(),regi_add() to region_chg(),region_add()
Documentation: Fix typos
Documentation/ABI: Fix typos
scripts: kernel-doc: fix macro handling in enums
scripts: kernel-doc: parse DEFINE_DMA_UNMAP_[ADDR|LEN]
Documentation: riscv: Update boot image header since EFI stub is supported
Documentation: riscv: Add early boot document
Documentation: arm: Add bootargs to the table of added DT parameters
docs: kernel-parameters: Refer to the correct bitmap function
doc: update params of memhp_default_state=
docs: Add book to process/kernel-docs.rst
docs: sparse: fix invalid link addresses
docs: vfs: clean up after the iterate() removal
docs: Add a section on surveys to the researcher guidelines
docs: move mips under arch
docs: move loongarch under arch
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk subsystem updates from Stephen Boyd:
"This pull request is full of clk driver changes. In fact, there aren't
any changes to the clk framework this time around. That's probably
because everyone was on vacation (yours truly included). We did lose a
couple clk drivers this time around because nobody was using those
devices. That skews the diffstat a bit, but either way, nothing looks
out of the ordinary here. The usual suspects are chugging along adding
support for more SoCs and fixing bugs.
If I had to choose, I'd say the theme for the past few months has been
"polish". There's quite a few patches that migrate to
devm_platform_ioremap_resource() in here. And there's more than a
handful of patches that move the NR_CLKS define from the DT binding
header to the driver. There's even patches that migrate drivers to use
clk_parent_data and clk_hw to describe clk tree topology. It seems
that the spring (summer?) cleaning bug got some folks, or the
semiconductor shortage finally hit the software side.
New Drivers:
- StarFive JH7110 SoC clock drivers
- Qualcomm IPQ5018 Global Clock Controller driver
- Versa3 clk generator to support 48KHz playback/record with audio
codec on RZ/G2L SMARC EVK
Removed Drivers:
- Remove non-OF mmp clk drivers
- Remove OXNAS clk driver
Updates:
- Add __counted_by to struct clk_hw_onecell_data and struct
spmi_pmic_div_clk_cc
- Move defines for numbers of clks (NR_CLKS) from DT headers to
drivers
- Introduce kstrdup_and_replace() and use it
- Add PLL rates for Rockchip rk3568
- Add the display clock tree for Rockchip rv1126
- Add Audio Clock Generator (ADG) clocks on Renesas R-Car Gen3 and
RZ/G2 SoCs
- Convert sun9i-mmc clock to use
devm_platform_get_and_ioremap_resource()
- Fix function name in a comment in ccu_mmc_timing.c
- Parameter name correction for ccu_nkm_round_rate()
- Implement CLK_SET_RATE_PARENT for Allwinner NKM clocks, i.e.
consider alternative parent rates when determining clock rates
- Set CLK_SET_RATE_PARENT for Allwinner A64 pll-mipi
- Support finding closest (as opposed to closest but not higher)
clock rate for NM, NKM, mux and div type clocks, as use it for
Allwinner A64 pll-video0
- Prefer current parent rate if able to generate ideal clock rate for
Allwinner NKM clocks
- Clean up Qualcomm SMD RPM driver, with interconnect bus clocks
moved out to the interconnect drivers
- Fix various PM runtime bugs across many Qualcomm clk drivers
- Migrate Qualcomm MDM9615 is to parent_hw and parent_data
- Add network related resets on Qualcomm IPQ4019
- Add a couple missing USB related clocks to Qualcomm IPQ9574
- Add missing gpll0_sleep_clk_src to Qualcomm MSM8917 global clock
controller
- In the Qualcomm QDU1000 global clock controller, GDSCs, clkrefs,
and GPLL1 are added, while PCIe pipe clock, SDCC rcg ops are
corrected
- Add missing GDSCs to and correct GDSCs for the SC8280XP global
clock controller driver
- Support retention for the Qualcomm SC8280XP display clock
controller GDSCs.
- Qualcommm's SDCC apps_clk_src is marked with CLK_OPS_PARENT_ENABLE
to fix issues with missing parent clocks across sc7180, sm7150,
sm6350 and sm8250, while sm8450 is corrected to use floor ops
- Correct Qualcomm SM6350 GPU clock controller's clock supplies
- Drop unwanted clocks from the Qualcomm IPQ5332 GCC driver
- Add missing OXILICX GDSC to Qualcomm MSM8226 GCC
- Change the delay in the Qualcomm reset controller to fsleep() for
correctness
- Extend the Qualcomm SM83550 Video clock controller to support
SC8280XP
- Add graphics clock support on Renesas RZ/G2M, RZ/G2N, RZ/G2E, and
R-Car H3, M3-W, and M3-N SoCs
- Add Clocked Serial Interface (CSI) clocks on Renesas RZ/V2M
- Add PWM (MTU3) clock and reset on Renesas RZ/G2UL and RZ/Five
- Add the PDM IPC clock for i.MX93
- Add 519.75MHz frequency support for i.MX9 PLL
- Simplify the .determine_rate() implementation for i.MX GPR mux
- Make the i.MX8QXP LPCG clock use devm_platform_ioremap_resource()
- Add the audio mux clock to i.MX8
- Fix the SPLL2 MULT range for PLLv4
- Update the SPLL2 type in i.MX8ULP
- Fix the SAI4 clock on i.MX8MP
- Add silicon revision print for i.MX25 on clocks init
- Drop the return value from __mx25_clocks_init()
- Fix the clock pauses on no-op set_rate for i.MX8M composite clock
- Drop restrictions for i.MX PLL14xx and fix its max prediv value
- Drop the 393216000 and 361267200 from i.MX PLL14xx rate table to
allow glitch free switching"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (207 commits)
clk: qcom: Fix SM_GPUCC_8450 dependencies
clk: lmk04832: Support using PLL1_LD as SPI readback pin
clk: lmk04832: Don't disable vco clock on probe fail
clk: lmk04832: Set missing parent_names for output clocks
clk: mvebu: Convert to devm_platform_ioremap_resource()
clk: nuvoton: Convert to devm_platform_ioremap_resource()
clk: socfpga: agilex: Convert to devm_platform_ioremap_resource()
clk: ti: Use devm_platform_get_and_ioremap_resource()
clk: mediatek: Convert to devm_platform_ioremap_resource()
clk: hsdk-pll: Convert to devm_platform_ioremap_resource()
clk: gemini: Convert to devm_platform_ioremap_resource()
clk: fsl-sai: Convert to devm_platform_ioremap_resource()
clk: bm1880: Convert to devm_platform_ioremap_resource()
clk: axm5516: Convert to devm_platform_ioremap_resource()
clk: actions: Convert to devm_platform_ioremap_resource()
clk: cdce925: Remove redundant of_match_ptr()
clk: pxa910: Move number of clocks to driver source
clk: pxa1928: Move number of clocks to driver source
clk: pxa168: Move number of clocks to driver source
clk: mmp2: Move number of clocks to driver source
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"We have some patches to DTS[I] files in arm and arm64 as well, that
were merged here as DT headers were being changed.
The most interesting stuff is the Intel Tangier chip support and
AMLogic C3 in my opinion.
No core changes this time.
Drivers:
- Intel Tangier SoC pin control support
- AMLogic C3 SoC pin control support
- Texas Instruments AM654 SoC pin control support
- Qualcomm SM8350 and SM6115 LPASS (Low Power Audio Sub-System) pin
control support
- Qualcomm PMX75 and PM7550BA (Power Management) pin control support
- Qualcomm PMC8180 and PMC8180C (Power Management) pin control
support
- DROP the Oxnas driver as there is not enough of community interest
to keep carrying this ARM(11) port
Enhancements:
- Bias control in the MT7986 pin control driver
- Misc device tree binding enhancements such as the Broadcom 11351
being converted to YAML
- New macro: DEFINE_NOIRQ_DEV_PM_OPS() put to use
- Clean up some SPDX headers
- Handle non-unique devicetree subnode names in two Renesas drivers"
* tag 'pinctrl-v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl: mlxbf3: Remove gpio_disable_free()
pinctrl: use capital "OR" for multiple licenses in SPDX
dt-bindings: pinctrl: renesas,rza2: Use 'additionalProperties' for child nodes
pinctrl: cherryview: fix address_space_handler() argument
pinctrl: intel: consolidate ACPI dependency
pinctrl: tegra: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: renesas: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mvebu: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: at91: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: cherryview: Switch to use DEFINE_NOIRQ_DEV_PM_OPS() helper
pm: Introduce DEFINE_NOIRQ_DEV_PM_OPS() helper
pinctrl: mediatek: assign functions to configure pin bias on MT7986
pinctrl: mediatek: fix pull_type data for MT7981
dt-bindings: pinctrl: aspeed: Allow only defined pin mux node properties
dt-bindings: pinctrl: Drop 'phandle' properties
pinctrl: lynxpoint: Make use of pm_ptr()
pinctrl: baytrail: Make use of pm_ptr()
pinctrl: intel: Switch to use exported namespace
pinctrl: lynxpoint: reuse common functions from pinctrl-intel
pinctrl: cherryview: reuse common functions from pinctrl-intel
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull intel EDAC fixes from Tony Luck:
- Old igen6 driver could lose pending events during initialization
- Sapphire Rapids workstations have fewer memory controllers than their
bigger siblings. This confused the driver.
* tag 'edac_updates_for_v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: Fix the issue of no error events
EDAC/i10nm: Skip the absent memory controllers
|