| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
A new field was introduced in 74d46992e0d9, bi_partno, instead of using
bdev->bd_contains and encoding the partition information in the bi_bdev
field. __bio_clone_fast was changed to copy the disk information, but
not the partition information. At minimum, this regressed bcache and
caused data corruption.
Signed-off-by: Michael Lyle <[email protected]>
Fixes: 74d46992e0d9 ("block: replace bi_bdev with a gendisk pointer and partitions index")
Reported-by: Pavel Goran <[email protected]>
Reported-by: Campbell Steven <[email protected]>
Reviewed-by: Coly Li <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Cc: <[email protected]> # 4.14
Signed-off-by: Jens Axboe <[email protected]>
|
|
A system booted with a small number of cores enabled per package
panics because the estimate of __max_logical_packages is too low.
This occurs when the total number of active cores across all packages is
less than the maximum core count for a single package. e.g.:
On a 4 package system with 20 cores/package where only 4 cores are
enabled on each package, the value of __max_logical_packages is
calculated as DIV_ROUND_UP(16 / 20) = 1 and not 4.
Calculate __max_logical_packages after the cpu enumeration has completed.
Use the boot cpu's data to extrapolate the number of packages.
Signed-off-by: Prarit Bhargava <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Tom Lendacky <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: He Chen <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Piotr Luc <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arvind Yadav <[email protected]>
Cc: Vitaly Kuznetsov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Mathias Krause <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Analyzing large early boot allocations unveiled the logical package id
storage as a prominent memory waste. Since commit 1f12e32f4cd5
("x86/topology: Create logical package id") every 64-bit system allocates a
128k array to convert logical package ids.
This happens because the array is sized for MAX_LOCAL_APIC which is always
32k on 64bit systems, and it needs 4 bytes for each entry.
This is fairly wasteful, especially for the common case of having only one
socket, which uses exactly 4 byte out of 128K.
There is no user of the package id map which is performance critical, so
the lookup is not required to be O(1). Store the logical processor id in
cpu_data and use a loop based lookup.
To keep the mapping stable accross cpu hotplug operations, add a flag to
cpu_data which is set when the CPU is brought up the first time. When the
flag is set, then cpu_data is not reinitialized by copying boot_cpu_data on
subsequent bringups.
[ tglx: Rename the flag to 'initialized', use proper pointers instead of
repeated cpu_data(x) evaluation and massage changelog. ]
Signed-off-by: Andi Kleen <[email protected]>
Signed-off-by: Prarit Bhargava <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Tom Lendacky <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: He Chen <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Piotr Luc <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arvind Yadav <[email protected]>
Cc: Vitaly Kuznetsov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Mathias Krause <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The SNB-EP uncore driver is the only user of topology_phys_to_logical_pkg
in a performance critical path.
Change it query the logical pkg ID only once at initialization time and
then cache it in box structure. This allows to change the logical package
management without affecting the performance critical path.
Signed-off-by: Andi Kleen <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Prarit Bhargava <[email protected]>
Cc: Tom Lendacky <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: He Chen <[email protected]>
Cc: Stephane Eranian <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Piotr Luc <[email protected]>
Cc: Andy Lutomirski <[email protected]>
Cc: Arvind Yadav <[email protected]>
Cc: Vitaly Kuznetsov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Tim Chen <[email protected]>
Cc: Mathias Krause <[email protected]>
Cc: "Kirill A. Shutemov" <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The new function mp_register_ioapic_irq() is a subset of the code in
mp_override_legacy_irq().
Replace the code duplication by invoking mp_register_ioapic_irq() from
mp_override_legacy_irq().
Signed-off-by: Vikas C Sajjan <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
Platforms which support only IOAPIC mode, pass the SCI information above
the legacy space (0-15) via the FADT mechanism and not via MADT.
In such cases mp_override_legacy_irq() which is invoked from
acpi_sci_ioapic_setup() to register SCI interrupts fails for interrupts
greater equal 16, since it is meant to handle only the legacy space and
emits error "Invalid bus_irq %u for legacy override".
Add a new function to handle SCI interrupts >= 16 and invoke it
conditionally in acpi_sci_ioapic_setup().
The code duplication due to this new function will be cleaned up in a
separate patch.
Co-developed-by: Sunil V L <[email protected]>
Signed-off-by: Vikas C Sajjan <[email protected]>
Signed-off-by: Sunil V L <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Tested-by: Abdul Lateef Attar <[email protected]>
Acked-by: Rafael J. Wysocki <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
When crosvm is used to boot a kernel as a VM, the SMP MP-table is found
at physical address 0x0. This causes mpf_base to be set to 0 and a
subsequent "if (!mpf_base)" check in default_get_smp_config() results in
the MP-table not being parsed. Further into the boot this results in an
oops when attempting a read_apic_id().
Add a boolean variable that is set to true when the MP-table is found.
Use this variable for testing if the MP-table was found so that even a
value of 0 for mpf_base will result in continued parsing of the MP-table.
Fixes: 5997efb96756 ("x86/boot: Use memremap() to map the MPF and MPC data")
Reported-by: Tomeu Vizoso <[email protected]>
Signed-off-by: Tom Lendacky <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
|
|
Fix duplicates for sparc and parisc. This was due these following commits.
1. commit 4c97a0c8fee3 ("arch: define CPU_BIG_ENDIAN for all fixed big
endian archs")
2. commit 97d9f969161d ("arch/sparc: Define config parameter
CPU_BIG_ENDIAN")
3. commit 74ad3d28af21 ("parisc: Define CONFIG_CPU_BIG_ENDIAN")
Remove duplicates.
Signed-off-by: Babu Moger <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
While working on a qemu and SeaBIOS-port to parisc, those PDC structures are
useful to have accessible from userspace.
Signed-off-by: Helge Deller <[email protected]>
|
|
parisc is big-endian only but sparse assumes the same endianness as the
building machine.
This is problematic for code which expect __BYTE_ORDER__ being correctly
predefined by the compiler which sparse can then pre-process differently
from what gcc would.
Fix this by letting sparse know about the architecture endianness.
To: James Bottomley <[email protected]>
To: Helge Deller <[email protected]>
CC: [email protected]
Signed-off-by: Luc Van Oostenryck <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
|
|
Add topology support, including multi-core scheduler support on
PA8800/PA8900 CPUs and enhanced output in /proc/cpuinfo, e.g.
lscpu now reports on a single-socket, dual-core machine:
Architecture: parisc64
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
CPU family: PA-RISC 2.0
Model name: PA8800 (Mako)
Signed-off-by: Helge Deller <[email protected]>
|
|
As noted by Christoph Biedl, passing a pointer size of 4 in the new CAS
implementation causes a kernel crash. The attached patch corrects the
off by one error in the argument validity check.
In reviewing the code, I noticed that we only perform word operations
with the pointer size argument. The subi instruction intentionally uses
a word condition on 64-bit kernels. Nullification was used instead of a
cmpib instruction as the branch should never be taken. The shlw
pseudo-operation generates a depw,z instruction and it clears the target
before doing a shift left word deposit. Thus, we don't need to clip the
upper 32 bits of this argument on 64-bit kernels.
Tested with a gcc testsuite run with a 64-bit kernel. The gcc atomic
code in libgcc is the only direct user of the new CAS implementation
that I am aware of.
Signed-off-by: John David Anglin <[email protected]>
Cc: [email protected] # 3.13+
Signed-off-by: Helge Deller <[email protected]>
|
|
* pm-core:
PM / runtime: Drop children check from __pm_runtime_set_status()
|
|
To simplify testing of these rarely used code paths, add a module parameter
that turns it on. One eventinj.flat test (NMI after iret) fails when
loading kvm_intel with vnmi=0.
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
|
|
This is more or less a revert of commit 2c82878b0cb3 ("KVM: VMX: require
virtual NMI support", 2017-03-27); it turns out that Core 2 Duo machines
only had virtual NMIs in some SKUs.
The revert is not trivial because in the meanwhile there have been several
fixes to nested NMI injection. Therefore, the entire vNMI state is moved
to struct loaded_vmcs.
Another change compared to before the patch is a simplification here:
if (unlikely(!cpu_has_virtual_nmis() && vmx->soft_vnmi_blocked &&
!(is_guest_mode(vcpu) && nested_cpu_has_virtual_nmis(
get_vmcs12(vcpu))))) {
The final condition here is always true (because nested_cpu_has_virtual_nmis
is always false) and is removed.
Fixes: 2c82878b0cb38fd516fd612c67852a6bbf282003
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1490803
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
|
|
For many years some users of assigned devices have reported worse
performance on AMD processors with NPT than on AMD without NPT,
Intel or bare metal.
The reason turned out to be that SVM is discarding the guest PAT
setting and uses the default (PA0=PA4=WB, PA1=PA5=WT, PA2=PA6=UC-,
PA3=UC). The guest might be using a different setting, and
especially might want write combining but isn't getting it
(instead getting slow UC or UC- accesses).
Thanks a lot to [email protected] for noticing the relation
to the g_pat setting. The patch has been tested also by a bunch
of people on VFIO users forums.
Fixes: 709ddebf81cb40e3c36c6109a7892e8b93a09464
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196409
Cc: [email protected]
Signed-off-by: Paolo Bonzini <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Tested-by: Nick Sarnie <[email protected]>
Signed-off-by: Radim Krčmář <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
GICv4 Support for KVM/ARM for v4.15
|
|
We got a regression report about the HD-audio HDMI chmap, where some
surround channels are reported as UNKNOWN. The git bisection pointed
the culprit at the commit 9b3dc8aa3fb1 ("ALSA: hda - Register chmap
obj as priv data instead of codec"). The story behind scene is like
this:
- While moving the code out of the legacy HDA to the HDA common place,
the patch modifies the code to obtain the chmap array indirectly in
a byte array, and it expands it to kctl value array.
- At the latter operation, the size of the array is wrongly passed by
sizeof() to the pointer.
- It can be 4 on 32bit arch, thus too short for 6+ channels.
(And that's the reason why it didn't hit other persons; it's 8 on
64bit arch, thus it's usually enough.)
The code was further changed meanwhile, but the problem persisted.
Let's fix it by correctly evaluating the array size.
Fixes: 9b3dc8aa3fb1 ("ALSA: hda - Register chmap obj as priv data instead of codec")
Reported-by: VDR User <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
When an interrupt occurs, the value of at least one of the belonging
controls should have changed. To make sure they get re-read from device
on the next read, invalidate the cache. This was correctly implemented
for uac2 already, but missing for uac1.
Signed-off-by: Julian Scheel <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Fix the AFS file locking whereby the use of the big kernel lock (which
could be slept with) was replaced by a spinlock (which couldn't). The
problem is that the AFS code was doing stuff inside the critical section
that might call schedule(), so this is a broken transformation.
Fix this by the following means:
(1) Use a state machine with a proper state that can only be changed under
the spinlock rather than using a collection of bit flags.
(2) Cache the key used for the lock and the lock type in the afs_vnode
struct so that the manager work function doesn't have to refer to a
file_lock struct that's been dequeued. This makes signal handling
safer.
(4) Move the unlock from afs_do_unlk() to afs_fl_release_private() which
means that unlock is achieved in other circumstances too.
(5) Unlock the file on the server before taking the next conflicting lock.
Also change:
(1) Check the permits on a file before actually trying the lock.
(2) fsync the file before effecting an explicit unlock operation. We
don't fsync if the lock is erased otherwise as we might not be in a
context where we can actually do that.
Further fixes:
(1) Fixed-fileserver address rotation is made to work. It's only used by
the locking functions, so couldn't be tested before.
Fixes: 72f98e72551f ("locks: turn lock_flocks into a spinlock")
Signed-off-by: David Howells <[email protected]>
cc: [email protected]
|
|
Jakub Kicinski says:
====================
nfp: flower fixes and typo in ethtool stats name
This set comes from the flower offload team. From Pieter we have a fix
to the semantics of the flag telling FW whether to allocate or free
a mask and correction of a typo in name of one of the MAC statistics
(reveive -> received, we use past participle to match HW docs).
Dirk fixes propagation of max MTU to representors.
John improves VXLAN offload. The old code was not using egress_dev at
all, so Jiri missed it in his conversion. The validation of ingress
port is still not perfect, we will have to wait for shared block dust
to settle to tackle it. This is how John explains the cases:
The following example rule is now correctly offloaded in net-next kernel:
tc filter add dev vxlan0 ... enc_dst_port 4789 ... skip_sw \
action redirect dev nfp_p0
The following rule will not be offloaded to the NFP (previously it
incorrectly matched vxlan packets - it shouldn't as ingress dev is not
a vxlan netdev):
tc filter add dev nfp_p0 ... enc_dst_port 4789 ... skip_sw \
action redirect dev nfp_p0
Rules that are not matching on tunnels and are an egress offload are
rejected. The standard match code assumes the offloaded repr is the
ingress port. Rejecting egress offloads removes the chances of false
interpretation of the rules on the NFP.
A know issue is that the following rule example could still be offloaded
and incorrectly match tunnel data:
tc filter add dev dummy ... enc_dst_port 4789 ... skip_sw \
action redirect dev nfp_p0
Because the egress register callback does not give information on the
ingress netdev, the patch assumes that if it is not a repr then it is
the correct tunnel netdev. This may not be the case. The chances of this
happening is reduced as it is enforced that the rule match on the well
known vxlan port but it is still possible.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Pass information to the match offload on whether or not the repr is the
ingress or egress dev. Only accept tunnel matches if repr is the egress
dev.
This means rules such as the following are successfully offloaded:
tc .. add dev vxlan0 .. enc_dst_port 4789 .. action redirect dev nfp_p0
While rules such as the following are rejected:
tc .. add dev nfp_p0 .. enc_dst_port 4789 .. action redirect dev vxlan0
Also reject non tunnel flows that are offloaded to an egress dev.
Non tunnel matches assume that the offload dev is the ingress port and
offload a match accordingly.
Fixes: 611aec101ab7 ("nfp: compile flower vxlan tunnel metadata match fields")
Signed-off-by: John Hurley <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Register a callback for offloading flows that have a repr as their egress
device. The new egdev_register function is added to net-next for the 4.15
release.
Signed-off-by: John Hurley <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The PF netdev is used for data transfer for reprs, so reprs inherit the
maximum MTU settings of the PF netdev.
Fixes: 5de73ee46704 ("nfp: general representor implementation")
Signed-off-by: Dirk van der Merwe <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Correct typo in vlan receive MAC stats. Previously the MAC statistics
reported in ethtool for vlan receive contained a typo resulting in ethtool
reporting rx_vlan_reveive_ok instead of rx_vlan_received_ok.
Fixes: a5950182c00e ("nfp: map mac_stats and vf_cfg BARs")
Fixes: 098ce840c9ef ("nfp: report MAC statistics in ethtool")
Reported-by: Brendan Galloway <[email protected]>
Signed-off-by: Pieter Jansen van Vuuren <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Hardware has no notion of new or last mask id, instead it makes use of the
message type (i.e. add flow or del flow) in combination with a single bit
in metadata flags to determine when to add or delete a mask id. Previously
we made use of the new or last flags to indicate that a new mask should be
allocated or deallocated, respectively. This incorrect behaviour is fixed
by making use single bit in metadata flags to indicate mask allocation or
deallocation.
Fixes: 43f84b72c50d ("nfp: add metadata to each flow offload")
Signed-off-by: Pieter Jansen van Vuuren <[email protected]>
Reviewed-by: Jakub Kicinski <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Looks like this was mistakenly added to the tree as part of
commit 186b3c998c50 ("virtio-net: support XDP_REDIRECT").
Signed-off-by: Joel Stanley <[email protected]>
Acked-by: Jason Wang <[email protected]>
Acked-by: Michael S. Tsirkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
On machines using rfkill interface the buffer needs to have been
allocated before the initial use (memset) of it.
Reported-by: Valdis Kletnieks <[email protected]>
Signed-off-by: Mario Limonciello <[email protected]>
Tested-by: Valdis Kletnieks <[email protected]>
Signed-off-by: Darren Hart (VMware) <[email protected]>
|
|
dell-wmi and dell-smbios-wmi are dependent upon dell-wmi-descriptor
finishing probe successfully to probe themselves.
Currently if dell-wmi-descriptor fails probing in a non-recoverable way
(such as invalid header) dell-wmi and dell-smbios-wmi will continue to
try to redo probing due to deferred probing.
To solve this have the dependent drivers query the dell-wmi-descriptor
driver whether the descriptor has been determined valid. The possible
results are:
-ENODEV: Descriptor GUID missing from WMI bus
-EPROBE_DEFER: Descriptor not yet probed, dependent driver should wait
and use deferred probing
< 0: Descriptor probed, invalid. Dependent driver should return an
error.
0: Successful descriptor probe, dependent driver can continue
Successful descriptor probe still doesn't mean that the descriptor driver
is necessarily bound at the time of initialization of dependent driver.
Userspace can unbind the driver, so all methods used from driver
should still be verified to return success values otherwise deferred
probing be used.
Signed-off-by: Mario Limonciello <[email protected]>
Reviewed-by: Pali Rohár <[email protected]>
Signed-off-by: Darren Hart (VMware) <[email protected]>
|
|
devm_kzalloc will return NULL pointer if no memory was allocated.
This should be checked. This problem also existed when the driver
was dell-wmi.c.
Signed-off-by: Mario Limonciello <[email protected]>
Reviewed-by: Pali Rohár <[email protected]>
Signed-off-by: Darren Hart (VMware) <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This branch contains platform-related driver updates for ARM and
ARM64, these are the areas that bring the changes:
New drivers:
- driver support for Renesas R-Car V3M (R8A77970)
- power management support for Amlogic GX
- a new driver for the Tegra BPMP thermal sensor
- a new bus driver for Technologic Systems NBUS
Changes for subsystems that prefer to merge through arm-soc:
- the usual updates for reset controller drivers from Philipp Zabel,
with five added drivers for SoCs in the arc, meson, socfpa,
uniphier and mediatek families
- updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla,
Heiner Kallweit and Lorenzo Pieralisi
Changes specific to some ARM-based SoC
- the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on
ARM as well
- several changes for power management on Broadcom SoCs
- various improvements on Qualcomm, Broadcom, Amlogic, Atmel,
Mediatek
- minor Cleanups for Samsung, TI OMAP SoCs"
[ NOTE! This doesn't work without the previous ARM SoC device-tree pull,
because the R8A77970 driver is missing a header file that came from
that pull.
The fact that this got merged afterwards only fixes it at this point,
and bisection of that driver will fail if/when you walk into the
history of that driver. - Linus ]
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits)
soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader
bus: add driver for the Technologic Systems NBUS
memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg()
soc: qcom: remove unused label
soc: amlogic: gx pm domain: add PM and OF dependencies
drivers/firmware: psci_checker: Add missing destroy_timer_on_stack()
dt-bindings: power: add amlogic meson power domain bindings
soc: amlogic: add Meson GX VPU Domains driver
soc: qcom: Remote filesystem memory driver
dt-binding: soc: qcom: Add binding for rmtfs memory
of: reserved_mem: Accessor for acquiring reserved_mem
of/platform: Generalize /reserved-memory handling
soc: mediatek: pwrap: fix fatal compiler error
soc: mediatek: pwrap: fix compiler errors
arm64: mediatek: cleanup message for platform selection
soc: Allow test-building of MediaTek drivers
soc: mediatek: place Kconfig for all SoC drivers under menu
soc: mediatek: pwrap: add support for MT7622 SoC
soc: mediatek: pwrap: add common way for setup CS timing extenstion
soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap
..
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Arnd Bergmann:
"We add device tree files for a couple of additional SoCs in various
areas:
Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for
networking, Amlogic A113D for audio, and Renesas R-Car V3M for
automotive.
As usual, lots of new boards get added based on those and other SoCs:
- Actions S500 based CubieBoard6 single-board computer
- Amlogic Meson-AXG A113D based development board
- Amlogic S912 based Khadas VIM2 single-board computer
- Amlogic S912 based Tronsmart Vega S96 set-top-box
- Allwinner H5 based NanoPi NEO Plus2 single-board computer
- Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers
- Allwinner A83T based TBS A711 Tablet
- Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8
- Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500
wireless access points and routers
- NXP i.MX51 based Zodiac Inflight Innovations RDU1 board
- NXP i.MX53 based GE Healthcare PPD biometric monitor
- NXP i.MX6 based Pistachio single-board computer
- NXP i.MX6 based Vining-2000 automotive diagnostic interface
- NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants
- Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone
- Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet
- Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA
- Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board
- Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards
- Renasas r8a7745 based iWave G22D-SODIMM SoM
- Rockchip rk3288 based Amarula Vyasa single-board computer
- Samsung Exynos5800 based Odroid HC1 single-board computer
For existing SoC support, there was a lot of ongoing work, as usual
most of that concentrated on the Renesas, Rockchip, OMAP, i.MX,
Amlogic and Allwinner platforms, but others were also active.
Rob Herring and many others worked on reducing the number of issues
that the latest version of 'dtc' now warns about. Unfortunately there
is still a lot left to do.
A rework of the ARM foundation model introduced several new files for
common variations of the model"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits)
arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3
dt-bindings: bus: Add documentation for the Technologic Systems NBUS
arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock
ARM: dts: owl-s500: Add CubieBoard6
dt-bindings: arm: actions: Add CubieBoard6
ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock
ARM: dts: owl-s500: Set power domains for CPU2 and CPU3
arm: dts: mt7623: remove unused compatible string for pio node
arm: dts: mt7623: update usb related nodes
arm: dts: mt7623: update crypto node
ARM: dts: sun8i: a711: Enable USB OTG
ARM: dts: sun8i: a711: Add regulator support
ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1
ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1
ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file
ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes
ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes
ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes
ARM: dts: sunxi: Add dtsi for AXP81x PMIC
arm64: dts: allwinner: H5: Restore EMAC changes
...
|
|
As per recommendation from Linus we should be using a distinct type for
blacklist flags.
[mkp: was cut against an older kernel, applied by hand]
Signed-off-by: Hannes Reinecke <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform updates from Arnd Bergmann:
"Most of the commits are for defconfig changes, to enable newly added
drivers or features that people have started using. For the changed
lines lines, we have mostly cleanups, the affected platforms are OMAP,
Versatile, EP93xx, Samsung, Broadcom, i.MX, and Actions.
The largest single change is the introduction of the TI "sysc" bus
driver, with the intention of cleaning up more legacy code.
Two new SoC platforms get added this time:
- Allwinner R40 is a modernized version of the A20 chip, now with a
Quad-Core ARM Cortex-A7. According to the manufacturer, it is
intended for "Smart Hardware"
- Broadcom Hurricane 2 (Aka Strataconnect BCM5334X) is a family of
chips meant for managed gigabit ethernet switches, based around a
Cortex-A9 CPU.
Finally, we gain SMP support for two platforms: Renesas R-Car E2 and
Amlogic Meson8/8b, which were previously added but only supported
uniprocessor operation"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
ARM: multi_v7_defconfig: Select RPMSG_VIRTIO as module
ARM: multi_v7_defconfig: enable CONFIG_GPIO_UNIPHIER
arm64: defconfig: enable CONFIG_GPIO_UNIPHIER
ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b
ARM: meson: Add SMP bringup code for Meson8 and Meson8b
ARM: smp_scu: allow the platform code to read the SCU CPU status
ARM: smp_scu: add a helper for powering on a specific CPU
dt-bindings: Amlogic: Add Meson8 and Meson8b SMP related documentation
ARM: OMAP3: Delete an unnecessary variable initialisation in omap3xxx_hwmod_init()
ARM: OMAP3: Use common error handling code in omap3xxx_hwmod_init()
ARM: defconfig: select the right SX150X driver
arm64: defconfig: Enable QCOM_IOMMU
arm64: Add ThunderX drivers to defconfig
arm64: defconfig: Enable Tegra PCI controller
cpufreq: imx6q: Move speed grading check to cpufreq driver
arm64: defconfig: re-enable Qualcomm DB410c USB
ARM: configs: stm32: Add MDMA support in STM32 defconfig
ARM: imx: Enable cpuidle for i.MX6DL starting at 1.1
bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
bus: ti-sysc: mark PM functions as __maybe_unused
...
|
|
The check for "active" children in __pm_runtime_set_status(), when
trying to set the parent device status to "suspended", doesn't
really make sense, because in fact it is not invalid to set the
status of a device with runtime PM disabled to "suspended" in any
case. It is invalid to enable runtime PM for a device with its
status set to "suspended" while its child_count reference counter
is nonzero, but the check in __pm_runtime_set_status() doesn't
really cover that situation.
For this reason, drop the children check from __pm_runtime_set_status()
and add a check against child_count reference counters of "suspended"
devices to pm_runtime_enable().
Fixes: a8636c89648a (PM / Runtime: Don't allow to suspend a device with an active child)
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Reviewed-by: Johan Hovold <[email protected]>
|
|
The default max_cache_size_bytes for dm-bufio is meant to be the lesser
of 25% of the size of the vmalloc area and 2% of the size of lowmem.
However, on 32-bit systems the intermediate result in the expression
(VMALLOC_END - VMALLOC_START) * DM_BUFIO_VMALLOC_PERCENT / 100
overflows, causing the wrong result to be computed. For example, on a
32-bit system where the vmalloc area is 520093696 bytes, the result is
1174405 rather than the expected 130023424, which makes the maximum
cache size much too small (far less than 2% of lowmem). This causes
severe performance problems for dm-verity users on affected systems.
Fix this by using mult_frac() to correctly multiply by a percentage. Do
this for all places in dm-bufio that multiply by a percentage. Also
replace (VMALLOC_END - VMALLOC_START) with VMALLOC_TOTAL, which contrary
to the comment is now defined in include/linux/vmalloc.h.
Depends-on: 9993bc635 ("sched/x86: Fix overflow in cyc2ns_offset")
Fixes: 95d402f057f2 ("dm: add bufio")
Cc: <[email protected]> # v3.2+
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Otherwise, it can happen that the QUEUE_FLAG_DISCARD isn't set but the
various discard attributes (which get exposed via sysfs) may be set.
Signed-off-by: Mike Snitzer <[email protected]>
|
|
The DM target's 'discards_supported' flag is intended to act as an
override. Meaning, even if the underlying storage doesn't support
discards the DM target will.
Signed-off-by: Mike Snitzer <[email protected]>
|
|
A DM device with a mix of discard capabilities (due to some underlying
devices not having discard support) _should_ just return -EOPNOTSUPP for
the region of the device that doesn't support discards (even if only by
way of the underlying driver formally not supporting discards). BUT,
that does ask the underlying driver to handle something that it never
advertised support for. In doing so we're exposing users to the
potential for a underlying disk driver hanging if/when a discard is
issued a the device that is incapable and never claimed to support
discards.
Fix this by requiring that each DM target in a DM table provide discard
support as a prereq for a DM device to advertise support for discards.
This may cause some configurations that were happily supporting discards
(even in the face of a mix of discard support) to stop supporting
discards -- but the risk of users hitting driver hangs, and forced
reboots, outweighs supporting those fringe mixed discard
configurations.
Cc: [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
|
|
It is very normal to see allocation failure, especially with blk-mq
request_queues, so it's unnecessary to report this error and annoy
people.
In practice this 'blk_get_request() returned -11' error gets logged
quite frequently when a blk-mq DM multipath device sees heavy IO.
This change is marked for stable@ because the annoying message in
question was included in stable@ commit 7083abbbf.
Fixes: 7083abbbf ("dm mpath: avoid that path removal can trigger an infinite loop")
Cc: [email protected]
Signed-off-by: Ming Lei <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Pull virtio updates from Michael Tsirkin:
"Fixes in qemu, vhost and virtio"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
fw_cfg: fix the command line module name
vhost/vsock: fix uninitialized vhost_vsock->guest_cid
vhost: fix end of range for access_ok
vhost/scsi: Use safe iteration in vhost_scsi_complete_cmd_work()
virtio_balloon: fix deadlock on OOM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen features and fixes for v4.15-rc1
Apart from several small fixes it contains the following features:
- a series by Joao Martins to add vdso support of the pv clock
interface
- a series by Juergen Gross to add support for Xen pv guests to be
able to run on 5 level paging hosts
- a series by Stefano Stabellini adding the Xen pvcalls frontend
driver using a paravirtualized socket interface"
* tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits)
xen/pvcalls: fix potential endless loop in pvcalls-front.c
xen/pvcalls: Add MODULE_LICENSE()
MAINTAINERS: xen, kvm: track pvclock-abi.h changes
x86/xen/time: setup vcpu 0 time info page
x86/xen/time: set pvclock flags on xen_time_init()
x86/pvclock: add setter for pvclock_pvti_cpu0_va
ptp_kvm: probe for kvm guest availability
xen/privcmd: remove unused variable pageidx
xen: select grant interface version
xen: update arch/x86/include/asm/xen/cpuid.h
xen: add grant interface version dependent constants to gnttab_ops
xen: limit grant v2 interface to the v1 functionality
xen: re-introduce support for grant v2 interface
xen: support priv-mapping in an HVM tools domain
xen/pvcalls: remove redundant check for irq >= 0
xen/pvcalls: fix unsigned less than zero error check
xen/time: Return -ENODEV from xen_get_wallclock()
xen/pvcalls-front: mark expected switch fall-through
xen: xenbus_probe_frontend: mark expected switch fall-throughs
xen/time: do not decrease steal time after live migration on xen
...
|
|
Pull KVM updates from Radim Krčmář:
"First batch of KVM changes for 4.15
Common:
- Python 3 support in kvm_stat
- Accounting of slabs to kmemcg
ARM:
- Optimized arch timer handling for KVM/ARM
- Improvements to the VGIC ITS code and introduction of an ITS reset
ioctl
- Unification of the 32-bit fault injection logic
- More exact external abort matching logic
PPC:
- Support for running hashed page table (HPT) MMU mode on a host that
is using the radix MMU mode; single threaded mode on POWER 9 is
added as a pre-requisite
- Resolution of merge conflicts with the last second 4.14 HPT fixes
- Fixes and cleanups
s390:
- Some initial preparation patches for exitless interrupts and crypto
- New capability for AIS migration
- Fixes
x86:
- Improved emulation of LAPIC timer mode changes, MCi_STATUS MSRs,
and after-reset state
- Refined dependencies for VMX features
- Fixes for nested SMI injection
- A lot of cleanups"
* tag 'kvm-4.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (89 commits)
KVM: s390: provide a capability for AIS state migration
KVM: s390: clear_io_irq() requests are not expected for adapter interrupts
KVM: s390: abstract conversion between isc and enum irq_types
KVM: s390: vsie: use common code functions for pinning
KVM: s390: SIE considerations for AP Queue virtualization
KVM: s390: document memory ordering for kvm_s390_vcpu_wakeup
KVM: PPC: Book3S HV: Cosmetic post-merge cleanups
KVM: arm/arm64: fix the incompatible matching for external abort
KVM: arm/arm64: Unify 32bit fault injection
KVM: arm/arm64: vgic-its: Implement KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: Document KVM_DEV_ARM_ITS_CTRL_RESET
KVM: arm/arm64: vgic-its: Free caches when GITS_BASER Valid bit is cleared
KVM: arm/arm64: vgic-its: New helper functions to free the caches
KVM: arm/arm64: vgic-its: Remove kvm_its_unmap_device
arm/arm64: KVM: Load the timer state when enabling the timer
KVM: arm/arm64: Rework kvm_timer_should_fire
KVM: arm/arm64: Get rid of kvm_timer_flush_hwstate
KVM: arm/arm64: Avoid phys timer emulation in vcpu entry/exit
KVM: arm/arm64: Move phys_timer_emulate function
KVM: arm/arm64: Use kvm_arm_timer_set/get_reg for guest register traps
...
|
|
As was discussed in September and October, add Jason along with
Doug to have a team maintainership model for the RDMA subystem.
Mellanox Technologies will be funding Jason's independent work on
the maintainership.
Signed-off-by: Jason Gunthorpe <[email protected]>
Signed-off-by: Doug Ledford <[email protected]>
|
|
Pull ARM updates from Russell King:
- add support for ELF fdpic binaries on both MMU and noMMU platforms
- linker script cleanups
- support for compressed .data section for XIP images
- discard memblock arrays when possible
- various cleanups
- atomic DMA pool updates
- better diagnostics of missing/corrupt device tree
- export information to allow userspace kexec tool to place images more
inteligently, so that the device tree isn't overwritten by the
booting kernel
- make early_printk more efficient on semihosted systems
- noMMU cleanups
- SA1111 PCMCIA update in preparation for further cleanups
* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits)
ARM: 8719/1: NOMMU: work around maybe-uninitialized warning
ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r"
ARM: 8713/1: NOMMU: Support MPU in XIP configuration
ARM: 8712/1: NOMMU: Use more MPU regions to cover memory
ARM: 8711/1: V7M: Add support for MPU to M-class
ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE
ARM: 8709/1: NOMMU: Disallow MPU for XIP
ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C
ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers
ARM: 8706/1: NOMMU: Move out MPU setup in separate module
ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel()
ARM: 8705/1: early_printk: use printascii() rather than printch()
ARM: 8703/1: debug.S: move hexbuf to a writable section
ARM: add additional table to compressed kernel
ARM: decompressor: fix BSS size calculation
pcmcia: sa1111: remove special sa1111 mmio accessors
pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources
ARM: better diagnostics with missing/corrupt dtb
ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size()
ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init
..
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"A bit of a small release, I suspect in part due to me travelling for
KS. But my backlog of patches to review is smaller than usual, so I
think in part folks just didn't send as much this cycle.
Non-highlights:
- Five fixes for the >128T address space handling, both to fix bugs
in our implementation and to bring the semantics exactly into line
with x86.
Highlights:
- Support for a new OPAL call on bare metal machines which gives us a
true NMI (ie. is not masked by MSR[EE]=0) for debugging etc.
- Support for Power9 DD2 in the CXL driver.
- Improvements to machine check handling so that uncorrectable errors
can be reported into the generic memory_failure() machinery.
- Some fixes and improvements for VPHN, which is used under PowerVM
to notify the Linux partition of topology changes.
- Plumbing to enable TM (transactional memory) without suspend on
some Power9 processors (PPC_FEATURE2_HTM_NO_SUSPEND).
- Support for emulating vector loads form cache-inhibited memory, on
some Power9 revisions.
- Disable the fast-endian switch "syscall" by default (behind a
CONFIG), we believe it has never had any users.
- A major rework of the API drivers use when initiating and waiting
for long running operations performed by OPAL firmware, and changes
to the powernv_flash driver to use the new API.
- Several fixes for the handling of FP/VMX/VSX while processes are
using transactional memory.
- Optimisations of TLB range flushes when using the radix MMU on
Power9.
- Improvements to the VAS facility used to access coprocessors on
Power9, and related improvements to the way the NX crypto driver
handles requests.
- Implementation of PMEM_API and UACCESS_FLUSHCACHE for 64-bit.
Thanks to: Alexey Kardashevskiy, Alistair Popple, Allen Pais, Andrew
Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Balbir Singh, Benjamin
Herrenschmidt, Breno Leitao, Christophe Leroy, Christophe Lombard,
Cyril Bur, Frederic Barrat, Gautham R. Shenoy, Geert Uytterhoeven,
Guilherme G. Piccoli, Gustavo Romero, Haren Myneni, Joel Stanley,
Kamalesh Babulal, Kautuk Consul, Markus Elfring, Masami Hiramatsu,
Michael Bringmann, Michael Neuling, Michal Suchanek, Naveen N. Rao,
Nicholas Piggin, Oliver O'Halloran, Paul Mackerras, Pedro Miraglia
Franco de Carvalho, Philippe Bergheaud, Sandipan Das, Seth Forshee,
Shriya, Stephen Rothwell, Stewart Smith, Sukadev Bhattiprolu, Tyrel
Datwyler, Vaibhav Jain, Vaidyanathan Srinivasan, and William A.
Kennington III"
* tag 'powerpc-4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (151 commits)
powerpc/64s: Fix Power9 DD2.0 workarounds by adding DD2.1 feature
powerpc/64s: Fix masking of SRR1 bits on instruction fault
powerpc/64s: mm_context.addr_limit is only used on hash
powerpc/64s/radix: Fix 128TB-512TB virtual address boundary case allocation
powerpc/64s/hash: Allow MAP_FIXED allocations to cross 128TB boundary
powerpc/64s/hash: Fix fork() with 512TB process address space
powerpc/64s/hash: Fix 128TB-512TB virtual address boundary case allocation
powerpc/64s/hash: Fix 512T hint detection to use >= 128T
powerpc: Fix DABR match on hash based systems
powerpc/signal: Properly handle return value from uprobe_deny_signal()
powerpc/fadump: use kstrtoint to handle sysfs store
powerpc/lib: Implement UACCESS_FLUSHCACHE API
powerpc/lib: Implement PMEM API
powerpc/powernv/npu: Don't explicitly flush nmmu tlb
powerpc/powernv/npu: Use flush_all_mm() instead of flush_tlb_mm()
powerpc/powernv/idle: Round up latency and residency values
powerpc/kprobes: refactor kprobe_lookup_name for safer string operations
powerpc/kprobes: Blacklist emulate_update_regs() from kprobes
powerpc/kprobes: Do not disable interrupts for optprobes and kprobes_on_ftrace
powerpc/kprobes: Disable preemption before invoking probe handler for optprobes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace update from Eric Biederman:
"The only change that is production ready this round is the work to
increase the number of uid and gid mappings a user namespace can
support from 5 to 340.
This code was carefully benchmarked and it was confirmed that in the
existing cases the performance remains the same. In the worst case
with 340 mappings an cache cold stat times go from 158ns to 248ns.
That is noticable but still quite small, and only the people who are
doing crazy things pay the cost.
This work uncovered some documentation and cleanup opportunities in
the mapping code, and patches to make those cleanups and improve the
documentation will be coming in the next merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Simplify insert_extent
userns: Make map_id_down a wrapper for map_id_range_down
userns: Don't read extents twice in m_start
userns: Simplify the user and group mapping functions
userns: Don't special case a count of 0
userns: bump idmap limits to 340
userns: use union in {g,u}idmap struct
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, we introduce sysfile-based quota support which is
required for Android by default. In addition, we allow that users are
able to reserve some blocks in runtime to mitigate performance drops
in low free space.
Enhancements:
- assign proper data segments according to write_hints given by user
- issue cache_flush on dirty devices only among multiple devices
- exploit cp_error flag and add more faults to enhance fault
injection test
- conduct more readaheads during f2fs_readdir
- add a range for discard commands
Bug fixes:
- fix zero stat->st_blocks when inline_data is set
- drop crypto key and free stale memory pointer while evict_inode is
failing
- fix some corner cases in free space and segment management
- fix wrong last_disk_size
This series includes lots of clean-ups and code enhancement in terms
of xattr operations, discard/flush command control. In addition, it
adds versatile debugfs entries to monitor f2fs status"
* tag 'f2fs-for-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (75 commits)
f2fs: deny accessing encryption policy if encryption is off
f2fs: inject fault in inc_valid_node_count
f2fs: fix to clear FI_NO_PREALLOC
f2fs: expose quota information in debugfs
f2fs: separate nat entry mem alloc from nat_tree_lock
f2fs: validate before set/clear free nat bitmap
f2fs: avoid opened loop codes in __add_ino_entry
f2fs: apply write hints to select the type of segments for buffered write
f2fs: introduce scan_curseg_cache for cleanup
f2fs: optimize the way of traversing free_nid_bitmap
f2fs: keep scanning until enough free nids are acquired
f2fs: trace checkpoint reason in fsync()
f2fs: keep isize once block is reserved cross EOF
f2fs: avoid race in between GC and block exchange
f2fs: save a multiplication for last_nid calculation
f2fs: fix summary info corruption
f2fs: remove dead code in update_meta_page
f2fs: remove unneeded semicolon
f2fs: don't bother with inode->i_version
f2fs: check curseg space before foreground GC
...
|
|
Be consistent about using uint32_t/uint8_t instead of u32/u8. This is
more so that we don't have to maintain /those/ types in xfsprogs.
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Eric Sandeen <[email protected]>
|
|
In commit f2e9ad21 ("xfs: check for race with xfs_reclaim_inode"), we
skip an inode if we're racing with freeing the inode via
xfs_reclaim_inode, but we forgot to release the rcu read lock when
dumping the inode, with the result that we exit to userspace with a lock
held. Don't do that; generic/320 with a 1k block size fails this
very occasionally.
================================================
WARNING: lock held when returning to user space!
4.14.0-rc6-djwong #4 Tainted: G W
------------------------------------------------
rm/30466 is leaving the kernel with locks still held!
1 lock held by rm/30466:
#0: (rcu_read_lock){....}, at: [<ffffffffa01364d3>] xfs_ifree_cluster.isra.17+0x2c3/0x6f0 [xfs]
------------[ cut here ]------------
WARNING: CPU: 1 PID: 30466 at kernel/rcu/tree_plugin.h:329 rcu_note_context_switch+0x71/0x700
Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug]
CPU: 1 PID: 30466 Comm: rm Tainted: G W 4.14.0-rc6-djwong #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1djwong0 04/01/2014
task: ffff880037680000 task.stack: ffffc90001064000
RIP: 0010:rcu_note_context_switch+0x71/0x700
RSP: 0000:ffffc90001067e50 EFLAGS: 00010002
RAX: 0000000000000001 RBX: ffff880037680000 RCX: ffff88003e73d200
RDX: 0000000000000002 RSI: ffffffff819e53e9 RDI: ffffffff819f4375
RBP: 0000000000000000 R08: 0000000000000000 R09: ffff880062c900d0
R10: 0000000000000000 R11: 0000000000000000 R12: ffff880037680000
R13: 0000000000000000 R14: ffffc90001067eb8 R15: ffff880037680690
FS: 00007fa3b8ce8700(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f69bf77c000 CR3: 000000002450a000 CR4: 00000000000006e0
Call Trace:
__schedule+0xb8/0xb10
schedule+0x40/0x90
exit_to_usermode_loop+0x6b/0xa0
prepare_exit_to_usermode+0x7a/0x90
retint_user+0x8/0x20
RIP: 0033:0x7fa3b87fda87
RSP: 002b:00007ffe41206568 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff02
RAX: 0000000000000000 RBX: 00000000010e88c0 RCX: 00007fa3b87fda87
RDX: 0000000000000000 RSI: 00000000010e89c8 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000003 R09: 0000000000000000
R10: 000000000000015e R11: 0000000000000246 R12: 00000000010c8060
R13: 00007ffe41206690 R14: 0000000000000000 R15: 0000000000000000
---[ end trace e88f83bf0cfbd07d ]---
Fixes: f2e9ad212def50bcf4c098c6288779dd97fff0f0
Cc: Omar Sandoval <[email protected]>
Signed-off-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Omar Sandoval <[email protected]>
|