aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-06-20ALSA: hda/conexant: Fix missing beep setupTakashi Iwai1-2/+2
Currently the Conexant codec driver sets up the beep NID after calling snd_hda_gen_parse_auto_config(). It turned out that this results in the insufficient setup for the beep control, as the generic parser handles the fake path in snd_hda_gen_parse_auto_config() only if the beep_nid is set up beforehand. For dealing with the beep widget properly, call cx_auto_parse_beep() before snd_hda_gen_parse_auto_config() call. Fixes: 51e19ca5f755 ("ALSA: hda/conexant - Clean up beep code") Cc: <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216152 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-06-20net/tls: fix tls_sk_proto_close executed repeatedlyZiyang Xuan1-0/+3
After setting the sock ktls, update ctx->sk_proto to sock->sk_prot by tls_update(), so now ctx->sk_proto->close is tls_sk_proto_close(). When close the sock, tls_sk_proto_close() is called for sock->sk_prot->close is tls_sk_proto_close(). But ctx->sk_proto->close() will be executed later in tls_sk_proto_close(). Thus tls_sk_proto_close() executed repeatedly occurred. That will trigger the following bug. ================================================================= KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:tls_sk_proto_close+0xd8/0xaf0 net/tls/tls_main.c:306 Call Trace: <TASK> tls_sk_proto_close+0x356/0xaf0 net/tls/tls_main.c:329 inet_release+0x12e/0x280 net/ipv4/af_inet.c:428 __sock_release+0xcd/0x280 net/socket.c:650 sock_close+0x18/0x20 net/socket.c:1365 Updating a proto which is same with sock->sk_prot is incorrect. Add proto and sock->sk_prot equality check at the head of tls_update() to fix it. Fixes: 95fa145479fb ("bpf: sockmap/tls, close can race with map free") Reported-by: [email protected] Signed-off-by: Ziyang Xuan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-20erspan: do not assume transport header is always setEric Dumazet2-10/+20
Rewrite tests in ip6erspan_tunnel_xmit() and erspan_fb_xmit() to not assume transport header is set. syzbot reported: WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 skb_transport_header include/linux/skbuff.h:2911 [inline] WARNING: CPU: 0 PID: 1350 at include/linux/skbuff.h:2911 ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Modules linked in: CPU: 0 PID: 1350 Comm: aoe_tx0 Not tainted 5.19.0-rc2-syzkaller-00160-g274295c6e53f #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:skb_transport_header include/linux/skbuff.h:2911 [inline] RIP: 0010:ip6erspan_tunnel_xmit+0x15af/0x2eb0 net/ipv6/ip6_gre.c:963 Code: 0f 47 f0 40 88 b5 7f fe ff ff e8 8c 16 4b f9 89 de bf ff ff ff ff e8 a0 12 4b f9 66 83 fb ff 0f 85 1d f1 ff ff e8 71 16 4b f9 <0f> 0b e9 43 f0 ff ff e8 65 16 4b f9 48 8d 85 30 ff ff ff ba 60 00 RSP: 0018:ffffc90005daf910 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000 RDX: ffff88801f032100 RSI: ffffffff882e8d3f RDI: 0000000000000003 RBP: ffffc90005dafab8 R08: 0000000000000003 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000000 R12: ffff888024f21d40 R13: 000000000000a288 R14: 00000000000000b0 R15: ffff888025a2e000 FS: 0000000000000000(0000) GS:ffff88802c800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e425000 CR3: 000000006d099000 CR4: 0000000000152ef0 Call Trace: <TASK> __netdev_start_xmit include/linux/netdevice.h:4805 [inline] netdev_start_xmit include/linux/netdevice.h:4819 [inline] xmit_one net/core/dev.c:3588 [inline] dev_hard_start_xmit+0x188/0x880 net/core/dev.c:3604 sch_direct_xmit+0x19f/0xbe0 net/sched/sch_generic.c:342 __dev_xmit_skb net/core/dev.c:3815 [inline] __dev_queue_xmit+0x14a1/0x3900 net/core/dev.c:4219 dev_queue_xmit include/linux/netdevice.h:2994 [inline] tx+0x6a/0xc0 drivers/block/aoe/aoenet.c:63 kthread+0x1e7/0x3b0 drivers/block/aoe/aoecmd.c:1229 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Fixes: d5db21a3e697 ("erspan: auto detect truncated ipv6 packets.") Reported-by: syzbot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Cc: William Tu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-20ipv4: fix bind address validity regression testsRiccardo Paolo Bestetti1-9/+27
Commit 8ff978b8b222 ("ipv4/raw: support binding to nonlocal addresses") introduces support for binding to nonlocal addresses, as well as some basic test coverage for some of the related cases. Commit b4a028c4d031 ("ipv4: ping: fix bind address validity check") fixes a regression which incorrectly removed some checks for bind address validation. In addition, it introduces regression tests for those specific checks. However, those regression tests are defective, in that they perform the tests using an incorrect combination of bind flags. As a result, those tests fail when they should succeed. This commit introduces additional regression tests for nonlocal binding and fixes the defective regression tests. It also introduces new set_sysctl calls for the ipv4_bind test group, as to perform the ICMP binding tests it is necessary to allow ICMP socket creation by setting the net.ipv4.ping_group_range knob. Fixes: b4a028c4d031 ("ipv4: ping: fix bind address validity check") Reported-by: Riccardo Paolo Bestetti <[email protected]> Signed-off-by: Riccardo Paolo Bestetti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-20ALSA: memalloc: Drop x86-specific hack for WC allocationsTakashi Iwai1-22/+1
The recent report for a crash on Haswell machines implied that the x86-specific (rather hackish) implementation for write-cache memory buffer allocation in ALSA core is buggy with the recent kernel in some corner cases. This patch drops the x86-specific implementation and uses the standard dma_alloc_wc() & co generically for avoiding the bug and also for simplification. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216112 Cc: <[email protected]> # v5.18+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-06-19Linux 5.19-rc3Linus Torvalds1-1/+1
2022-06-19Merge tag 'x86-urgent-2022-06-19' of ↵Linus Torvalds4-75/+159
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - Make RESERVE_BRK() work again with older binutils. The recent 'simplification' broke that. - Make early #VE handling increment RIP when successful. - Make the #VE code consistent vs. the RIP adjustments and add comments. - Handle load_unaligned_zeropad() across page boundaries correctly in #VE when the second page is shared. * tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page x86/tdx: Clarify RIP adjustments in #VE handler x86/tdx: Fix early #VE handling x86/mm: Fix RESERVE_BRK() for older binutils
2022-06-19Merge tag 'objtool-urgent-2022-06-19' of ↵Linus Torvalds6-19/+55
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull build tooling updates from Thomas Gleixner: - Remove obsolete CONFIG_X86_SMAP reference from objtool - Fix overlapping text section failures in faddr2line for real - Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it with finegrained annotations so objtool can validate that code correctly. * tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage faddr2line: Fix overlapping text section failures, the sequel objtool: Fix obsolete reference to CONFIG_X86_SMAP
2022-06-19Merge tag 'sched-urgent-2022-06-19' of ↵Linus Torvalds2-3/+38
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "A single scheduler fix plugging a race between sched_setscheduler() and balance_push(). sched_setscheduler() spliced the balance callbacks accross a lock break which makes it possible for an interleaving schedule() to observe an empty list" * tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix balance_push() vs __sched_setscheduler()
2022-06-19Merge tag 'locking-urgent-2022-06-19' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull lockdep fix from Thomas Gleixner: "A RT fix for lockdep. lockdep invokes prandom_u32() to create cookies. This worked until prandom_u32() was switched to the real random generator, which takes a spinlock for extraction, which does not work on RT when invoked from atomic contexts. lockdep has no requirement for real random numbers and it turns out sched_clock() is good enough to create the cookie. That works everywhere and is faster" * tag 'locking-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/lockdep: Use sched_clock() for random numbers
2022-06-19Merge tag 'irq-urgent-2022-06-19' of ↵Linus Torvalds9-6/+23
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt subsystem updates: Core: - Ensure runtime power management for chained interrupts Drivers: - A collection of OF node refcount fixes - Unbreak MIPS uniprocessor builds - Fix xilinx interrupt controller Kconfig dependencies - Add a missing compatible string to the Uniphier driver" * tag 'irq-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/loongson-liointc: Use architecture register to get coreid irqchip/uniphier-aidet: Add compatible string for NX1 SoC dt-bindings: interrupt-controller/uniphier-aidet: Add bindings for NX1 SoC irqchip/realtek-rtl: Fix refcount leak in map_interrupts irqchip/gic-v3: Fix refcount leak in gic_populate_ppi_partitions irqchip/gic-v3: Fix error handling in gic_populate_ppi_partitions irqchip/apple-aic: Fix refcount leak in aic_of_ic_init irqchip/apple-aic: Fix refcount leak in build_fiq_affinity irqchip/gic/realview: Fix refcount leak in realview_gic_of_init irqchip/xilinx: Remove microblaze+zynq dependency genirq: PM: Use runtime PM for chained interrupts
2022-06-19tools headers UAPI: Sync linux/prctl.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+9
To pick the changes in: 9e4ab6c891094720 ("arm64/sme: Implement vector length configuration prctl()s") That don't result in any changes in tooling: $ tools/perf/trace/beauty/prctl_option.sh > before $ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h $ tools/perf/trace/beauty/prctl_option.sh > after $ diff -u before after $ Just silences this perf tools build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h' diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h Cc: Catalin Marinas <[email protected]> Cc: Mark Brown <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19Merge tag 'char-misc-5.19-rc3-take2' of ↵Linus Torvalds7-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes for real from Greg KH: "Let's tag the proper branch this time... Here are some small char/misc driver fixes for 5.19-rc3 that resolve some reported issues. They include: - mei driver fixes - comedi driver fix - rtsx build warning fix - fsl-mc-bus driver fix All of these have been in linux-next for a while with no reported issues" This is what the merge in commit f0ec9c65a8d6 _should_ have merged, but Greg fat-fingered the pull request and I got some small changes from linux-next instead there. Credit to Nathan Chancellor for eagle-eyes. Link: https://lore.kernel.org/all/[email protected]/ * tag 'char-misc-5.19-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: bus: fsl-mc-bus: fix KASAN use-after-free in fsl_mc_bus_remove() mei: me: add raptor lake point S DID mei: hbm: drop capability response on early shutdown mei: me: set internal pg flag to off on hardware reset misc: rtsx: Fix clang -Wsometimes-uninitialized in rts5261_init_from_hw() comedi: vmk80xx: fix expression for tx buffer size
2022-06-19Merge tag 'i2c-for-5.19-rc3' of ↵Linus Torvalds5-10/+22
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "MAINTAINERS rectifications and a few minor driver fixes" * tag 'i2c-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mediatek: Fix an error handling path in mtk_i2c_probe() i2c: designware: Use standard optional ref clock implementation MAINTAINERS: core DT include belongs to core MAINTAINERS: add include/dt-bindings/i2c to I2C SUBSYSTEM HOST DRIVERS i2c: npcm7xx: Add check for platform_driver_register MAINTAINERS: Update Synopsys DesignWare I2C to Supported
2022-06-19Merge tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds7-25/+37
Pull xfs fixes from Darrick Wong: "There's not a whole lot this time around (I'm still on vacation) but here are some important fixes for new features merged in -rc1: - Fix a bug where inode flag changes would accidentally drop nrext64 - Fix a race condition when toggling LARP mode" * tag 'xfs-5.19-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: preserve DIFLAG2_NREXT64 when setting other inode attributes xfs: fix variable state usage xfs: fix TOCTOU race involving the new logged xattrs control knob
2022-06-19perf metrics: Ensure at least 1 id per metricIan Rogers1-0/+9
We may have no events for a metric evaluated to a constant. In such a case ensure a tool event is at least evaluated for metric parsing and displaying. Fixes: 8586d2744ff3065e ("perf metrics: Don't add all tool events for sharing") Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Xing Zhengjun <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo1-2/+10
To get the changes in: cae889302ebf5a9b ("KVM: arm64: vgic-v3: List M1 Pro/Max as requiring the SEIS workaround") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19tools headers UAPI: Sync x86's asm/kvm.h with the kernel sourcesArnaldo Carvalho de Melo1-5/+6
To pick the changes in: f1a9761fbb00639c ("KVM: x86: Allow userspace to opt out of hypercall patching") That just rebuilds kvm-stat.c on x86, no change in functionality. This silences these perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h' diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h Cc: Oliver Upton <[email protected]> Cc: Paolo Bonzini <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19perf arm-spe: Don't set data source if it's not a memory operationLeo Yan1-14/+8
Except for memory load and store operations, ARM SPE records also can support other operation types, bug when set the data source field the current code assumes a record is a either load operation or store operation, this leads to wrongly synthesize memory samples. This patch strictly checks the record operation type, it only sets data source only for the operation types ARM_SPE_LD and ARM_SPE_ST, otherwise, returns zero for data source. Therefore, we can synthesize memory samples only when data source is a non-zero value, the function arm_spe__is_memory_event() is useless and removed. Fixes: e55ed3423c1bb29f ("perf arm-spe: Synthesize memory event") Reviewed-by: Ali Saidi <[email protected]> Reviewed-by: German Gomez <[email protected]> Signed-off-by: Leo Yan <[email protected]> Tested-by: Ali Saidi <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: [email protected] Cc: Andrew Kilroy <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Leo Yan <[email protected]> Cc: Li Huafei <[email protected]> Cc: [email protected] Cc: Mark Rutland <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nick Forrington <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19perf expr: Allow exponents on floating point valuesIan Rogers2-1/+3
Pass the optional exponent component through to strtod that already supports it. We already have exponents in ScaleUnit and so this adds uniformity. Reported-by: Zhengjun Xing <[email protected]> Reviewed-By: Kajol Jain <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Richter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19perf test topology: Use !strncmp(right platform) to fix guest PPC ↵Athira Rajeev1-1/+1
comparision check commit cfd7092c31aed728 ("perf test session topology: Fix test to skip the test in guest environment") added check to skip the testcase if the socket_id can't be fetched from topology info. But the condition check uses strncmp which should be changed to !strncmp and to correctly match platform. Fix this condition check. Fixes: cfd7092c31aed728 ("perf test session topology: Fix test to skip the test in guest environment") Reported-by: Thomas Richter <[email protected]> Signed-off-by: Athira Jajeev <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Disha Goel <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: [email protected] Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nageswara R Sastry <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19perf test: Record only user callchains on the "Check Arm64 callgraphs are ↵Michael Petlan1-1/+1
complete in fp mode" test The testcase 'Check Arm64 callgraphs are complete in fp mode' wants to see the following output: 610 leaf 62f parent 648 main However, without excluding kernel callchains, the output might look like: ffffc2ff40ef1b5c arch_local_irq_enable ffffc2ff419d032c __schedule ffffc2ff419d06c0 schedule ffffc2ff40e4da30 do_notify_resume ffffc2ff40e421b0 work_pending 610 leaf 62f parent 648 main Adding '--user-callchains' leaves only the wanted symbols in the chain. Fixes: cd6382d82752737e ("perf test arm64: Test unwinding using fame-pointer (fp) mode") Suggested-by: German Gomez <[email protected]> Reviewed-by: German Gomez <[email protected]> Reviewed-by: Leo Yan <[email protected]> Signed-off-by: Michael Petlan <[email protected]> Cc: German Gomez <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19perf beauty: Update copy of linux/socket.h with the kernel sourcesArnaldo Carvalho de Melo1-1/+6
To pick the changes in: f94fd25cb0aaf77f ("tcp: pass back data left in socket after receive") That don't result in any changes in the tables generated from that header. This silences this perf build warning: Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h' diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h Cc: Jakub Kicinski <[email protected]> Cc: Jens Axboe <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19perf test: Fix variable length array undefined behavior in bp_accountIan Rogers1-2/+14
Fix: tests/bp_account.c:154:9: runtime error: variable length array bound evaluates to non-positive value 0 by switching from a variable length to an allocated array. Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19libperf evsel: Open shouldn't leak fd on failureIan Rogers1-5/+12
If perf_event_open() fails the fd is opened but it is only freed by closing (not by delete). Typically when an open fails you don't call close and so this results in a memory leak. To avoid this, add a close when open fails. Signed-off-by: Ian Rogers <[email protected]> Reviewed-By: Kajol Jain <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19perf test: Fix "perf stat CSV output linter" test on s390Thomas Richter2-72/+45
perf test -F 83 ("perf stat CSV output linter") fails on s390. Reason is the wrong number of fields for certain CPU core/die/socket related output. On x84_64 the output of command: # ./perf stat -x, -A -a --no-merge true CPU0,1.50,msec,cpu-clock,1502781,100.00,1.052,CPUs utilized CPU1,1.48,msec,cpu-clock,1476113,100.00,1.034,CPUs utilized ... results in 8 fields with 7 comma separators. On s390 the output of command: # ./perf stat -x, -A -a --no-merge -- true 0.95,msec,cpu-clock,949800,100.00,1.060,CPUs utilized ... results in 7 fields with 6 comma separators. Therefore this tests fails on s390. Similar issues exist for per-die and per-socket output which is not supported on s390. I have rewritten the python program to count commas in each output line into a bash function to achieve the same result. I hope this makes it a bit easier. Output before: # ./perf test -F 83 83: perf stat CSV output linter : Checking CSV output: no args [Success] Checking CSV output: system wide [Success] Checking CSV output: system wide Checking CSV output: \ system wide no aggregation 6.92,msec,cpu-clock,\ 6918131,100.00,6.972,CPUs utilized ... RuntimeError: wrong number of fields. expected 7 in \ 6.92,msec,cpu-clock,6918131,100.00,6.972,CPUs utilized FAILED! # Output after: # ./perf test -F 83 83: perf stat CSV output linter : Checking CSV output: no args [Success] Checking CSV output: system wide [Success] Checking CSV output: system wide Checking CSV output:\ system wide no aggregation [Success] Checking CSV output: interval [Success] Checking CSV output: event [Success] Checking CSV output: per core [Success] Checking CSV output: per thread [Success] Checking CSV output: per die [Success] Checking CSV output: per node [Success] Checking CSV output: per socket [Success] Ok # Committer notes: Continues to work on x86_64 $ perf test lint 89: perf stat CSV output linter : Ok $ perf test -v lint Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc 89: perf stat CSV output linter : --- start --- test child forked, pid 53133 Checking CSV output: no args [Success] Checking CSV output: system wide [Skip] paranoid and not root Checking CSV output: system wide [Skip] paranoid and not root Checking CSV output: interval [Success] Checking CSV output: event [Success] Checking CSV output: per core [Skip] paranoid and not root Checking CSV output: per thread [Skip] paranoid and not root Checking CSV output: per die [Skip] paranoid and not root Checking CSV output: per node [Skip] paranoid and not root Checking CSV output: per socket [Skip] paranoid and not root test child finished with 0 ---- end ---- perf stat CSV output linter: Ok $ Signed-off-by: Thomas Richter <[email protected]> Acked-by: Ian Rogers <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Claire Jensen <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Sumanth Korikkar <[email protected]> Cc: Sven Schnelle <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19perf unwind: Fix uninitialized variableIan Rogers1-1/+1
The 'ret' variable may be uninitialized on error goto paths. Fixes: dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects") Reported-by: Sedat Dilek <[email protected]> Reviewed-by: Fangrui Song <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Tested-by: Sedat Dilek <[email protected]> # LLVM-14 (x86-64) Cc: Fangrui Song <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: [email protected] Cc: Peter Zijlstra <[email protected]> Cc: Sebastian Ullrich <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-06-19net: phy: at803x: fix NULL pointer dereference on AR9331 PHYOleksij Rempel1-0/+6
Latest kernel will explode on the PHY interrupt config, since it depends now on allocated priv. So, run probe to allocate priv to fix it. ar9331_switch ethernet.1:10 lan0 (uninitialized): PHY [!ahb!ethernet@1a000000!mdio!switch@10:00] driver [Qualcomm Atheros AR9331 built-in PHY] (irq=13) CPU 0 Unable to handle kernel paging request at virtual address 0000000a, epc == 8050e8a8, ra == 80504b34 ... Call Trace: [<8050e8a8>] at803x_config_intr+0x5c/0xd0 [<80504b34>] phy_request_interrupt+0xa8/0xd0 [<8050289c>] phylink_bringup_phy+0x2d8/0x3ac [<80502b68>] phylink_fwnode_phy_connect+0x118/0x130 [<8074d8ec>] dsa_slave_create+0x270/0x420 [<80743b04>] dsa_port_setup+0x12c/0x148 [<8074580c>] dsa_register_switch+0xaf0/0xcc0 [<80511344>] ar9331_sw_probe+0x370/0x388 [<8050cb78>] mdio_probe+0x44/0x70 [<804df300>] really_probe+0x200/0x424 [<804df7b4>] __driver_probe_device+0x290/0x298 [<804df810>] driver_probe_device+0x54/0xe4 [<804dfd50>] __device_attach_driver+0xe4/0x130 [<804dcb00>] bus_for_each_drv+0xb4/0xd8 [<804dfac4>] __device_attach+0x104/0x1a4 [<804ddd24>] bus_probe_device+0x48/0xc4 [<804deb44>] deferred_probe_work_func+0xf0/0x10c [<800a0ffc>] process_one_work+0x314/0x4d4 [<800a17fc>] worker_thread+0x2a4/0x354 [<800a9a54>] kthread+0x134/0x13c [<8006306c>] ret_from_kernel_thread+0x14/0x1c Same Issue would affect some other PHYs (QCA8081, QCA9561), so fix it too. Fixes: 3265f4218878 ("net: phy: at803x: add fiber support") Signed-off-by: Oleksij Rempel <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-19drivers/net/ethernet/neterion/vxge: Fix a use-after-free bug in vxge-main.cWentao_Liang1-1/+1
The pointer vdev points to a memory region adjacent to a net_device structure ndev, which is a field of hldev. At line 4740, the invocation to vxge_device_unregister unregisters device hldev, and it also releases the memory region pointed by vdev->bar0. At line 4743, the freed memory region is referenced (i.e., iounmap(vdev->bar0)), resulting in a use-after-free vulnerability. We can fix the bug by calling iounmap before vxge_device_unregister. 4721. static void vxge_remove(struct pci_dev *pdev) 4722. { 4723. struct __vxge_hw_device *hldev; 4724. struct vxgedev *vdev; … 4731. vdev = netdev_priv(hldev->ndev); … 4740. vxge_device_unregister(hldev); 4741. /* Do not call pci_disable_sriov here, as it will break child devices */ 4742. vxge_hw_device_terminate(hldev); 4743. iounmap(vdev->bar0); … 4749 vxge_debug_init(vdev->level_trace, "%s:%d Device unregistered", 4750 __func__, __LINE__); 4751 vxge_debug_entryexit(vdev->level_trace, "%s:%d Exiting...", __func__, 4752 __LINE__); 4753. } This is the screenshot when the vulnerability is triggered by using KASAN. We can see that there is a use-after-free reported by KASAN. /***************************start**************************/ root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove [ 178.296316] vxge_remove [ 182.057081] ================================================================== [ 182.057548] BUG: KASAN: use-after-free in vxge_remove+0xe0/0x15c [ 182.057760] Read of size 8 at addr ffff888006c76598 by task bash/119 [ 182.057983] [ 182.058747] CPU: 0 PID: 119 Comm: bash Not tainted 5.18.0 #5 [ 182.058919] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 182.059463] Call Trace: [ 182.059726] <TASK> [ 182.060017] dump_stack_lvl+0x34/0x44 [ 182.060316] print_report.cold+0xb2/0x6b7 [ 182.060401] ? kfree+0x89/0x290 [ 182.060478] ? vxge_remove+0xe0/0x15c [ 182.060545] kasan_report+0xa9/0x120 [ 182.060629] ? vxge_remove+0xe0/0x15c [ 182.060706] vxge_remove+0xe0/0x15c [ 182.060793] pci_device_remove+0x5d/0xe0 [ 182.060968] device_release_driver_internal+0xf1/0x180 [ 182.061063] pci_stop_bus_device+0xae/0xe0 [ 182.061150] pci_stop_and_remove_bus_device_locked+0x11/0x20 [ 182.061236] remove_store+0xc6/0xe0 [ 182.061297] ? subordinate_bus_number_show+0xc0/0xc0 [ 182.061359] ? __mutex_lock_slowpath+0x10/0x10 [ 182.061438] ? sysfs_kf_write+0x6d/0xa0 [ 182.061525] kernfs_fop_write_iter+0x1b0/0x260 [ 182.061610] ? sysfs_kf_bin_read+0xf0/0xf0 [ 182.061695] new_sync_write+0x209/0x310 [ 182.061789] ? new_sync_read+0x310/0x310 [ 182.061865] ? cgroup_rstat_updated+0x5c/0x170 [ 182.061937] ? preempt_count_sub+0xf/0xb0 [ 182.061995] ? pick_next_entity+0x13a/0x220 [ 182.062063] ? __inode_security_revalidate+0x44/0x80 [ 182.062155] ? security_file_permission+0x46/0x2a0 [ 182.062230] vfs_write+0x33f/0x3e0 [ 182.062303] ksys_write+0xb4/0x150 [ 182.062369] ? __ia32_sys_read+0x40/0x40 [ 182.062451] do_syscall_64+0x3b/0x90 [ 182.062531] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 182.062894] RIP: 0033:0x7f3f37d17274 [ 182.063558] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 89 54 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 182.063797] RSP: 002b:00007ffd5ba9e178 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 182.064117] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f3f37d17274 [ 182.064219] RDX: 0000000000000002 RSI: 000055bbec327180 RDI: 0000000000000001 [ 182.064315] RBP: 000055bbec327180 R08: 000000000000000a R09: 00007f3f37de7cf0 [ 182.064414] R10: 000000000000000a R11: 0000000000000246 R12: 00007f3f37de8760 [ 182.064513] R13: 0000000000000002 R14: 00007f3f37de3760 R15: 0000000000000002 [ 182.064691] </TASK> [ 182.064916] [ 182.065224] The buggy address belongs to the physical page: [ 182.065804] page:00000000ef31e4f4 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x6c76 [ 182.067419] flags: 0x100000000000000(node=0|zone=1) [ 182.068997] raw: 0100000000000000 0000000000000000 ffffea00001b1d88 0000000000000000 [ 182.069118] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 182.069294] page dumped because: kasan: bad access detected [ 182.069331] [ 182.069360] Memory state around the buggy address: [ 182.070006] ffff888006c76480: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070136] ffff888006c76500: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070230] >ffff888006c76580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070305] ^ [ 182.070456] ffff888006c76600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070505] ffff888006c76680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 182.070606] ================================================================== [ 182.071374] Disabling lock debugging due to kernel taint /*****************************end*****************************/ After fixing the bug as done in the patch, we can find KASAN do not report the bug and the device(00:03.0) has been successfully removed. /*****************************start***************************/ root@kernel:~# echo 1 > /sys/bus/pci/devices/0000:00:03.0/remove root@kernel:~# /******************************end****************************/ Signed-off-by: Wentao_Liang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-18Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds26-895/+947
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Fix a variety of bugs, many of which were found by folks using fuzzing or error injection. Also fix up how test_dummy_encryption mount option is handled for the new mount API. Finally, fix/cleanup a number of comments and ext4 Documentation files" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix a doubled word "need" in a comment ext4: add reserved GDT blocks check ext4: make variable "count" signed ext4: correct the judgment of BUG in ext4_mb_normalize_request ext4: fix bug_on ext4_mb_use_inode_pa ext4: fix up test_dummy_encryption handling for new mount API ext4: use kmemdup() to replace kmalloc + memcpy ext4: fix super block checksum incorrect after mount ext4: improve write performance with disabled delalloc ext4: fix warning when submitting superblock in ext4_commit_super() ext4, doc: remove unnecessary escaping ext4: fix incorrect comment in ext4_bio_write_page() fs: fix jbd2_journal_try_to_free_buffers() kernel-doc comment
2022-06-18Merge tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds3-0/+43
Pull cifs client fixes from Steve French: "Two cifs debugging improvements - one found to deal with debugging a multichannel problem and one for a recent fallocate issue This does include the two larger multichannel reconnect (dynamically adjusting interfaces on reconnect) patches, because we recently found an additional problem with multichannel to one server type that I want to include at the same time" * tag '5.19-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: when a channel is not found for server, log its connection id smb3: add trace point for SMB2_set_eof
2022-06-18ext4: fix a doubled word "need" in a commentXiang wangx1-1/+1
Signed-off-by: Xiang wangx <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-06-18ext4: add reserved GDT blocks checkZhang Yi1-0/+10
We capture a NULL pointer issue when resizing a corrupt ext4 image which is freshly clear resize_inode feature (not run e2fsck). It could be simply reproduced by following steps. The problem is because of the resize_inode feature was cleared, and it will convert the filesystem to meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was not reduced to zero, so could we mistakenly call reserve_backup_gdb() and passing an uninitialized resize_inode to it when adding new group descriptors. mkfs.ext4 /dev/sda 3G tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck mount /dev/sda /mnt resize2fs /dev/sda 8G ======== BUG: kernel NULL pointer dereference, address: 0000000000000028 CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748 ... RIP: 0010:ext4_flex_group_add+0xe08/0x2570 ... Call Trace: <TASK> ext4_resize_fs+0xbec/0x1660 __ext4_ioctl+0x1749/0x24e0 ext4_ioctl+0x12/0x20 __x64_sys_ioctl+0xa6/0x110 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2dd739617b ======== The fix is simple, add a check in ext4_resize_begin() to make sure that the es->s_reserved_gdt_blocks is zero when the resize_inode feature is disabled. Cc: [email protected] Signed-off-by: Zhang Yi <[email protected]> Reviewed-by: Ritesh Harjani <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-06-18ext4: make variable "count" signedDing Xiang1-1/+2
Since dx_make_map() may return -EFSCORRUPTED now, so change "count" to be a signed integer so we can correctly check for an error code returned by dx_make_map(). Fixes: 46c116b920eb ("ext4: verify dir block before splitting it") Cc: [email protected] Signed-off-by: Ding Xiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-06-18ext4: correct the judgment of BUG in ext4_mb_normalize_requestBaokun Li1-1/+16
ext4_mb_normalize_request() can move logical start of allocated blocks to reduce fragmentation and better utilize preallocation. However logical block requested as a start of allocation (ac->ac_o_ex.fe_logical) should always be covered by allocated blocks so we should check that by modifying and to or in the assertion. Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Ritesh Harjani <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-06-18ext4: fix bug_on ext4_mb_use_inode_paBaokun Li1-0/+9
Hulk Robot reported a BUG_ON: ================================================================== kernel BUG at fs/ext4/mballoc.c:3211! [...] RIP: 0010:ext4_mb_mark_diskspace_used.cold+0x85/0x136f [...] Call Trace: ext4_mb_new_blocks+0x9df/0x5d30 ext4_ext_map_blocks+0x1803/0x4d80 ext4_map_blocks+0x3a4/0x1a10 ext4_writepages+0x126d/0x2c30 do_writepages+0x7f/0x1b0 __filemap_fdatawrite_range+0x285/0x3b0 file_write_and_wait_range+0xb1/0x140 ext4_sync_file+0x1aa/0xca0 vfs_fsync_range+0xfb/0x260 do_fsync+0x48/0xa0 [...] ================================================================== Above issue may happen as follows: ------------------------------------- do_fsync vfs_fsync_range ext4_sync_file file_write_and_wait_range __filemap_fdatawrite_range do_writepages ext4_writepages mpage_map_and_submit_extent mpage_map_one_extent ext4_map_blocks ext4_mb_new_blocks ext4_mb_normalize_request >>> start + size <= ac->ac_o_ex.fe_logical ext4_mb_regular_allocator ext4_mb_simple_scan_group ext4_mb_use_best_found ext4_mb_new_preallocation ext4_mb_new_inode_pa ext4_mb_use_inode_pa >>> set ac->ac_b_ex.fe_len <= 0 ext4_mb_mark_diskspace_used >>> BUG_ON(ac->ac_b_ex.fe_len <= 0); we can easily reproduce this problem with the following commands: `fallocate -l100M disk` `mkfs.ext4 -b 1024 -g 256 disk` `mount disk /mnt` `fsstress -d /mnt -l 0 -n 1000 -p 1` The size must be smaller than or equal to EXT4_BLOCKS_PER_GROUP. Therefore, "start + size <= ac->ac_o_ex.fe_logical" may occur when the size is truncated. So start should be the start position of the group where ac_o_ex.fe_logical is located after alignment. In addition, when the value of fe_logical or EXT4_BLOCKS_PER_GROUP is very large, the value calculated by start_off is more accurate. Cc: [email protected] Fixes: cd648b8a8fd5 ("ext4: trim allocation requests to group size") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Baokun Li <[email protected]> Reviewed-by: Ritesh Harjani <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-06-18ext4: fix up test_dummy_encryption handling for new mount APIEric Biggers1-63/+71
Since ext4 was converted to the new mount API, the test_dummy_encryption mount option isn't being handled entirely correctly, because the needed fscrypt_set_test_dummy_encryption() helper function combines parsing/checking/applying into one function. That doesn't work well with the new mount API, which split these into separate steps. This was sort of okay anyway, due to the parsing logic that was copied from fscrypt_set_test_dummy_encryption() into ext4_parse_param(), combined with an additional check in ext4_check_test_dummy_encryption(). However, these overlooked the case of changing the value of test_dummy_encryption on remount, which isn't allowed but ext4 wasn't detecting until ext4_apply_options() when it's too late to fail. Another bug is that if test_dummy_encryption was specified multiple times with an argument, memory was leaked. Fix this up properly by using the new helper functions that allow splitting up the parse/check/apply steps for test_dummy_encryption. Fixes: cebe85d570cf ("ext4: switch to the new mount api") Signed-off-by: Eric Biggers <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-06-18ext4: use kmemdup() to replace kmalloc + memcpyShuqi Zhang1-2/+1
Replace kmalloc + memcpy with kmemdup() Signed-off-by: Shuqi Zhang <[email protected]> Reviewed-by: Ritesh Harjani <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-06-18ext4: fix super block checksum incorrect after mountYe Bin1-8/+8
We got issue as follows: [home]# mount /dev/sda test EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended [home]# dmesg EXT4-fs (sda): warning: mounting fs with errors, running e2fsck is recommended EXT4-fs (sda): Errors on filesystem, clearing orphan list. EXT4-fs (sda): recovery complete EXT4-fs (sda): mounted filesystem with ordered data mode. Quota mode: none. [home]# debugfs /dev/sda debugfs 1.46.5 (30-Dec-2021) Checksum errors in superblock! Retrying... Reason is ext4_orphan_cleanup will reset ‘s_last_orphan’ but not update super block checksum. To solve above issue, defer update super block checksum after ext4_orphan_cleanup. Signed-off-by: Ye Bin <[email protected]> Cc: [email protected] Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Ritesh Harjani <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-06-18cifs: when a channel is not found for server, log its connection idShyam Prasad N1-0/+3
cifs_ses_get_chan_index gets the index for a given server pointer. When a match is not found, we warn about a possible bug. However, printing details about the non-matching server could be more useful to debug here. Signed-off-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-06-17net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platformsPeilin Ye1-2/+2
As reported by Yuming, currently tc always show a latency of UINT_MAX for netem Qdisc's on 32-bit platforms: $ tc qdisc add dev dummy0 root netem latency 100ms $ tc qdisc show dev dummy0 qdisc netem 8001: root refcnt 2 limit 1000 delay 275s 275s ^^^^^^^^^^^^^^^^ Let us take a closer look at netem_dump(): qopt.latency = min_t(psched_tdiff_t, PSCHED_NS2TICKS(q->latency, UINT_MAX); qopt.latency is __u32, psched_tdiff_t is signed long, (psched_tdiff_t)(UINT_MAX) is negative for 32-bit platforms, so qopt.latency is always UINT_MAX. Fix it by using psched_time_t (u64) instead. Note: confusingly, users have two ways to specify 'latency': 1. normally, via '__u32 latency' in struct tc_netem_qopt; 2. via the TCA_NETEM_LATENCY64 attribute, which is s64. For the second case, theoretically 'latency' could be negative. This patch ignores that corner case, since it is broken (i.e. assigning a negative s64 to __u32) anyways, and should be handled separately. Thanks Ted Lin for the analysis [1] . [1] https://github.com/raspberrypi/linux/issues/3512 Reported-by: Yuming Chen <[email protected]> Fixes: 112f9cb65643 ("netem: convert to qdisc_watchdog_schedule_ns") Reviewed-by: Cong Wang <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Acked-by: Stephen Hemminger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-17ethtool: Fix get module eeprom fallbackIvan Vecera1-1/+1
Function fallback_set_params() checks if the module type returned by a driver is ETH_MODULE_SFF_8079 and in this case it assumes that buffer returns a concatenated content of page A0h and A2h. The check is wrong because the correct type is ETH_MODULE_SFF_8472. Fixes: 96d971e307cc ("ethtool: Add fallback to get_module_eeprom from netlink command") Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-17bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiersJay Vosburgh1-1/+3
The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by: Jonathan Toppins <[email protected]> Signed-off-by: Jay Vosburgh <[email protected]> Fixes: b0929915e035 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/[email protected]/ Tested-by: Jonathan Toppins <[email protected]> Reviewed-by: Jonathan Toppins <[email protected]> Link: https://lore.kernel.org/r/9400.1655407960@famine Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-17igb: fix a use-after-free issue in igb_clean_tx_ringLorenzo Bianconi1-2/+5
Fix the following use-after-free bug in igb_clean_tx_ring routine when the NIC is running in XDP mode. The issue can be triggered redirecting traffic into the igb NIC and then closing the device while the traffic is flowing. [ 73.322719] CPU: 1 PID: 487 Comm: xdp_redirect Not tainted 5.18.3-apu2 #9 [ 73.330639] Hardware name: PC Engines APU2/APU2, BIOS 4.0.7 02/28/2017 [ 73.337434] RIP: 0010:refcount_warn_saturate+0xa7/0xf0 [ 73.362283] RSP: 0018:ffffc9000081f798 EFLAGS: 00010282 [ 73.367761] RAX: 0000000000000000 RBX: ffffc90000420f80 RCX: 0000000000000000 [ 73.375200] RDX: ffff88811ad22d00 RSI: ffff88811ad171e0 RDI: ffff88811ad171e0 [ 73.382590] RBP: 0000000000000900 R08: ffffffff82298f28 R09: 0000000000000058 [ 73.390008] R10: 0000000000000219 R11: ffffffff82280f40 R12: 0000000000000090 [ 73.397356] R13: ffff888102343a40 R14: ffff88810359e0e4 R15: 0000000000000000 [ 73.404806] FS: 00007ff38d31d740(0000) GS:ffff88811ad00000(0000) knlGS:0000000000000000 [ 73.413129] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 73.419096] CR2: 000055cff35f13f8 CR3: 0000000106391000 CR4: 00000000000406e0 [ 73.426565] Call Trace: [ 73.429087] <TASK> [ 73.431314] igb_clean_tx_ring+0x43/0x140 [igb] [ 73.436002] igb_down+0x1d7/0x220 [igb] [ 73.439974] __igb_close+0x3c/0x120 [igb] [ 73.444118] igb_xdp+0x10c/0x150 [igb] [ 73.447983] ? igb_pci_sriov_configure+0x70/0x70 [igb] [ 73.453362] dev_xdp_install+0xda/0x110 [ 73.457371] dev_xdp_attach+0x1da/0x550 [ 73.461369] do_setlink+0xfd0/0x10f0 [ 73.465166] ? __nla_validate_parse+0x89/0xc70 [ 73.469714] rtnl_setlink+0x11a/0x1e0 [ 73.473547] rtnetlink_rcv_msg+0x145/0x3d0 [ 73.477709] ? rtnl_calcit.isra.0+0x130/0x130 [ 73.482258] netlink_rcv_skb+0x8d/0x110 [ 73.486229] netlink_unicast+0x230/0x340 [ 73.490317] netlink_sendmsg+0x215/0x470 [ 73.494395] __sys_sendto+0x179/0x190 [ 73.498268] ? move_addr_to_user+0x37/0x70 [ 73.502547] ? __sys_getsockname+0x84/0xe0 [ 73.506853] ? netlink_setsockopt+0x1c1/0x4a0 [ 73.511349] ? __sys_setsockopt+0xc8/0x1d0 [ 73.515636] __x64_sys_sendto+0x20/0x30 [ 73.519603] do_syscall_64+0x3b/0x80 [ 73.523399] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 73.528712] RIP: 0033:0x7ff38d41f20c [ 73.551866] RSP: 002b:00007fff3b945a68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 73.559640] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff38d41f20c [ 73.567066] RDX: 0000000000000034 RSI: 00007fff3b945b30 RDI: 0000000000000003 [ 73.574457] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 [ 73.581852] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff3b945ab0 [ 73.589179] R13: 0000000000000000 R14: 0000000000000003 R15: 00007fff3b945b30 [ 73.596545] </TASK> [ 73.598842] ---[ end trace 0000000000000000 ]--- Fixes: 9cbc948b5a20c ("igb: add XDP support") Signed-off-by: Lorenzo Bianconi <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Link: https://lore.kernel.org/r/e5c01d549dc37bff18e46aeabd6fb28a7bcf84be.1655388571.git.lorenzo@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-17Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski14-107/+305
Daniel Borkmann says: ==================== pull-request: bpf 2022-06-17 We've added 12 non-merge commits during the last 4 day(s) which contain a total of 14 files changed, 305 insertions(+), 107 deletions(-). The main changes are: 1) Fix x86 JIT tailcall count offset on BPF-2-BPF call, from Jakub Sitnicki. 2) Fix a kprobe_multi link bug which misplaces BPF cookies, from Jiri Olsa. 3) Fix an infinite loop when processing a module's BTF, from Kumar Kartikeya Dwivedi. 4) Fix getting a rethook only in RCU available context, from Masami Hiramatsu. 5) Fix request socket refcount leak in sk lookup helpers, from Jon Maxwell. 6) Fix xsk xmit behavior which wrongly adds skb to already full cq, from Ciara Loftus. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: rethook: Reject getting a rethook if RCU is not watching fprobe, samples: Add use_trace option and show hit/missed counter bpf, docs: Update some of the JIT/maintenance entries selftest/bpf: Fix kprobe_multi bench test bpf: Force cookies array to follow symbols sorting ftrace: Keep address offset in ftrace_lookup_symbols selftests/bpf: Shuffle cookies symbols in kprobe multi test selftests/bpf: Test tail call counting with bpf2bpf and data on stack bpf, x86: Fix tail call count offset calculation on bpf2bpf call bpf: Limit maximum modifier chain length in btf_check_type_tags bpf: Fix request_sock leak in sk lookup helpers xsk: Fix generic transmit when completion queue reservation fails ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-17x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared pageKirill A. Shutemov1-1/+14
load_unaligned_zeropad() can lead to unwanted loads across page boundaries. The unwanted loads are typically harmless. But, they might be made to totally unrelated or even unmapped memory. load_unaligned_zeropad() relies on exception fixup (#PF, #GP and now #VE) to recover from these unwanted loads. In TDX guests, the second page can be shared page and a VMM may configure it to trigger #VE. The kernel assumes that #VE on a shared page is an MMIO access and tries to decode instruction to handle it. In case of load_unaligned_zeropad() it may result in confusion as it is not MMIO access. Fix it by detecting split page MMIO accesses and failing them. load_unaligned_zeropad() will recover using exception fixups. The issue was discovered by analysis and reproduced artificially. It was not triggered during testing. [ dhansen: fix up changelogs and comments for grammar and clarity, plus incorporate Kirill's off-by-one fix] Signed-off-by: Kirill A. Shutemov <[email protected]> Signed-off-by: Dave Hansen <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2022-06-17netfilter: cttimeout: fix slab-out-of-bounds read typo in cttimeout_net_exitFlorian Westphal1-1/+1
syzbot reports: BUG: KASAN: slab-out-of-bounds in __list_del_entry_valid+0xcc/0xf0 lib/list_debug.c:42 [..] list_del include/linux/list.h:148 [inline] cttimeout_net_exit+0x211/0x540 net/netfilter/nfnetlink_cttimeout.c:617 Problem is the wrong name of the list member, so container_of() result is wrong. Reported-by: <[email protected]> Fixes: 78222bacfca9 ("netfilter: cttimeout: decouple unlink and free on netns destruction") Signed-off-by: Florian Westphal <[email protected]>
2022-06-17Merge tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds6-6/+20
Pull NFS client fixes from Anna Schumaker: - Add FMODE_CAN_ODIRECT support to NFSv4 so opens don't fail - Fix trunking detection & cl_max_connect setting - Avoid pnfs_update_layout() livelocks - Don't keep retrying pNFS if the server replies with NFS4ERR_UNAVAILABLE * tag 'nfs-for-5.19-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFSv4: Add FMODE_CAN_ODIRECT after successful open of a NFS4.x file sunrpc: set cl_max_connect when cloning an rpc_clnt pNFS: Avoid a live lock condition in pnfs_update_layout() pNFS: Don't keep retrying if the server replied NFS4ERR_LAYOUTUNAVAILABLE
2022-06-17Merge tag 'pci-v5.19-fixes-2' of ↵Linus Torvalds4-17/+18
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: "Revert clipping of PCI host bridge windows to avoid E820 regions, which broke several machines by forcing unnecessary BAR reassignments (Hans de Goede)" * tag 'pci-v5.19-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: x86/PCI: Revert "x86/PCI: Clip only host bridge windows for E820 regions"
2022-06-17Merge tag 'printk-for-5.19-rc3' of ↵Linus Torvalds6-1/+50
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fixes from Petr Mladek: "Make the global console_sem available for CPU that is handling panic() or shutdown. This is an old problem when an existing console lock owner might block console output, but it became more visible with the kthreads" * tag 'printk-for-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Wait for the global console lock when the system is going down printk: Block console kthreads when direct printing will be required
Powered by cgit, Gruvboxed by Blaster4385.