aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-08-16drm/amd/display: Fix plug/unplug external monitor will hang while playback ↵Tom Chung1-2/+9
MPO video [Why] Pipes for MPO primary and overlay will be power down and power up during plug/unplug external monitor while MPO video playback. But the pipes were the same after plug/unplug and should not need to be power down and power up or it will make page flip interrupt disabled and cause hang issue. [How] Add pipe split change condition that not only check the top pipe pointer but also check the index of top pipe if both top pipes are available. Reviewed-by: Sun peng Li <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Tom Chung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/display: Add debug parameter to retain default clock tableDaniel Miess3-2/+3
[Why] Need a way to retain default clock table to aid the investigation into why 8k@30 display not lighting up on dcn314 [How] Use flag to prevent execution of bw_params helper function and function for updating bw_bounding_box Reviewed-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: Increase tlb flush timeout for sriovDusica Milinkovic3-3/+5
[Why] During multi-vf executing benchmark (Luxmark) observed kiq error timeout. It happenes because all of VFs do the tlb invalidation at the same time. Although each VF has the invalidate register set, from hardware side the invalidate requests are queue to execute. [How] In case of 12 VF increase timeout on 12*100ms Signed-off-by: Dusica Milinkovic <[email protected]> Acked-by: Shaoyun Liu <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/display: do not compare integers of different widthsJosip Pavic1-1/+2
[Why & How] Increase width of some variables to avoid comparing integers of different widths. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Josip Pavic <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/display: Add reserved dc_log_type.Ian Chen1-1/+3
Reviewed-by: Anthony Koo <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Ian Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/display: Fix pixel clock programmingIlya Bakoulin1-0/+2
[Why] Some pixel clock values could cause HDMI TMDS SSCPs to be misaligned between different HDMI lanes when using YCbCr420 10-bit pixel format. BIOS functions for transmitter/encoder control take pixel clock in kHz increments, whereas the function for setting the pixel clock is in 100Hz increments. Setting pixel clock to a value that is not on a kHz boundary will cause the issue. [How] Round pixel clock down to nearest kHz in 10/12-bpc cases. Reviewed-by: Aric Cyr <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Ilya Bakoulin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/display: 3.2.198Aric Cyr1-1/+1
This version brings along following fixes: -Fix edp panel missing event -Set ARGB16161616 pixel format to 26 -Fix dcn32 interger issue -Clear optc underflow bit after ODM clock off -Fix issue with stereo3D -Fix DML2 lightup issue -Correct DTBCLK for dcn314 -Revert for a regression -Fix clocks and bugs in DML2 -Enable SubVP by defalut on DCN32 & DCN321 -Corret boundary condition for engin ID on DCN303 -Fix FRL encoder override registry key -Fix VPG for dcn314 HPO -Fix Linux compile-time warning -Add new prefetch modes in DML for DCN32 Acked-by: Brian Chang <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/display: reverted limiting vscsdp_for_colorimetry and ARGB16161616 ↵Ethan Wellenreiter5-12/+0
pixel format addition [WHY] Limiting vscsdp_for_colorimetry for YCbCr420/BT2020 resulted in red/green point failures in HDR10 DTN tests. The re-implementation of ARGB16161616 was to fix this however it did not actually fix this issue but a side effect of the issue. [HOW] Change ARGB16161616 pixel format to 26. Reviewed-by: Martin Leung <[email protected]> Acked-by: Brian Chang <[email protected]> Signed-off-by: Ethan Wellenreiter <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/pm: Enable GFXOFF feature for SMU IP v13.0.4Tim Huang1-2/+2
The driver needs to set EnableGfxImu message parameter to tell the PMFW to set the flag that enables the GFXOFF feature. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: enable IH Clock Gating for OSS IP v6.0.1Tim Huang1-0/+1
Enable AMD_CG_SUPPORT_IH_CG support. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdkfd: potential crash in kfd_create_indirect_link_prop()Dan Carpenter1-4/+7
This code has two bugs. If kfd_topology_device_by_proximity_domain() failed on the first iteration through the loop then "cpu_link" is uninitialized and should not be dereferenced. The second bug is that we cannot dereference a list iterator when it points to the list head. In other words, if we exit the list_for_each_entry() loop exits without hitting a break then "cpu_link" is not a valid pointer and should not be dereferenced. Fix both of these problems by setting "cpu_link" to NULL when it is invalid and non-NULL when it is valid. That makes it easier to test for valid vs invalid. Fixes: 0f28cca87e9a ("drm/amdkfd: Extend KFD device topology to surface peer-to-peer links") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdkfd: reserve 2 queues for sdma 6.0.1 in bitmapYifan Zhang1-1/+6
There is only one engine in sdma 6.0.1, the total number of reserved queues should be 2, reflect this number in bitmap as well. Signed-off-by: Yifan Zhang <[email protected]> Reviewed-by: Tim Huang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: enable ATHUB IP v3.0.1 Clock GatingTim Huang1-0/+2
Enable AMD_CG_SUPPORT_ATHUB_MGCG and AMD_CG_SUPPORT_ATHUB_LS support. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: enable HDP IP v5.2.1 Clock GatingTim Huang1-0/+6
Enable AMD_CG_SUPPORT_HDP_MGCG and AMD_CG_SUPPORT_HDP_LS support. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: enable MMHUB IP v3.0.1 Clock GatingTim Huang1-0/+2
Enable AMD_CG_SUPPORT_MC_MGCG and AMD_CG_SUPPORT_MC_LS support. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: add ATHUB IP v3.0.1 Clock Gating supportTim Huang1-5/+37
Add ATHUB IP v3.0.1 in athub_v3_0_set_clockgating. The regATHUB_MISC_CNTL has different offset for ATHUB IP v3.0.1, so need to add IP version checking to use the right REG offset. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: add HDP IP v5.2.1 Clock Gating supportTim Huang1-0/+150
Add set/get_clockgating for HDP IP v5.2.1. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: add MMHUB IP v3.0.1 Clock Gating supportTim Huang1-3/+39
Add set/get_clockgating for MMHUB IP v3.0.1. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/pm: update the smu driver interface version for SMU IP v13.0.4Tim Huang1-1/+1
The pmfw has changed the driver interface version, so keep same with the fw. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdkfd: Fix mm reference in SVM eviction workerFelix Kuehling2-11/+7
Use the mm reference from the fence. This allows removing the svm_bo->svms pointer, which was problematic because we cannot assume that the struct kfd_process containing the svms is still allocated without holding a refcount on the process. Use mmget_not_zero to ensure the mm is still valid, and drop the svm_bo reference if it isn't. Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Philip Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/pm: add mode1 support on smu_v13_0_7Kenneth Feng1-0/+12
add mode1 support since it's missing on smu_v13_0_7 Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Yang Wang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/amdgpu: add ih cg and hdp sd on smu_v13_0_7Kenneth Feng1-1/+4
add ih cg and hdp sd on smu_v13_0_7 Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/pm: add missing ->fini_xxxx interfaces for some SMU13 asicsEvan Quan2-0/+4
Without these, potential memory leak may be induced. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amd/pm: add missing ->fini_microcode interface for Sienna CichlidEvan Quan1-0/+1
To avoid any potential memory leak. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16drm/amdgpu: disable 3DCGCG/CGLS temporarily due to stability issueEvan Quan1-0/+2
Some stability issues were reported with these features. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-08-16gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a fileAndrew Donnellan1-1/+1
Commit 36d4b36b6959 ("lib/nodemask: inline next_node_in() and node_random()") refactored some code by moving node_random() from lib/nodemask.c to include/linux/nodemask.h, thus requiring nodemask.h to include random.h, which conditionally defines add_latent_entropy() depending on whether the macro LATENT_ENTROPY_PLUGIN is defined. This broke the build on powerpc, where nodemask.h is indirectly included in arch/powerpc/kernel/prom_init.c, part of the early boot machinery that is excluded from the latent entropy plugin using DISABLE_LATENT_ENTROPY_PLUGIN. It turns out that while we add a gcc flag to disable the actual plugin, we don't undefine LATENT_ENTROPY_PLUGIN. This leads to the following: CC arch/powerpc/kernel/prom_init.o In file included from ./include/linux/nodemask.h:97, from ./include/linux/mmzone.h:17, from ./include/linux/gfp.h:7, from ./include/linux/xarray.h:15, from ./include/linux/radix-tree.h:21, from ./include/linux/idr.h:15, from ./include/linux/kernfs.h:12, from ./include/linux/sysfs.h:16, from ./include/linux/kobject.h:20, from ./include/linux/pci.h:35, from arch/powerpc/kernel/prom_init.c:24: ./include/linux/random.h: In function 'add_latent_entropy': ./include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy)); | ^~~~~~~~~~~~~~ | add_latent_entropy ./include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [scripts/Makefile.build:249: arch/powerpc/kernel/prom_init.o] Fehler 1 make[1]: *** [scripts/Makefile.build:465: arch/powerpc/kernel] Fehler 2 make: *** [Makefile:1855: arch/powerpc] Error 2 Change the DISABLE_LATENT_ENTROPY_PLUGIN flags to undefine LATENT_ENTROPY_PLUGIN for files where the plugin is disabled. Cc: Yury Norov <[email protected]> Fixes: 38addce8b600 ("gcc-plugins: Add latent_entropy plugin") Link: https://bugzilla.kernel.org/show_bug.cgi?id=216367 Link: https://lore.kernel.org/linuxppc-dev/[email protected]/ Reported-by: Erhard Furtner <[email protected]> Signed-off-by: Andrew Donnellan <[email protected]> Reviewed-by: Yury Norov <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-16LoadPin: Return EFAULT on copy_from_user() failuresKees Cook1-4/+2
The copy_from_user() function returns the number of bytes remaining to be copied on a failure. Such failures should return -EFAULT to high levels. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Fixes: 3f805f8cc23b ("LoadPin: Enable loading from trusted dm-verity devices") Cc: Matthias Kaehlcke <[email protected]> Cc: James Morris <[email protected]> Cc: "Serge E. Hallyn" <[email protected]> Cc: [email protected] Signed-off-by: Kees Cook <[email protected]>
2022-08-16exec: Replace kmap{,_atomic}() with kmap_local_page()Fabio M. De Francesco1-7/+7
The use of kmap() and kmap_atomic() are being deprecated in favor of kmap_local_page(). There are two main problems with kmap(): (1) It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization and (2) it also requires global TLB invalidation when the kmap’s pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. With kmap_local_page() the mappings are per thread, CPU local, can take page faults, and can be called from any context (including interrupts). It is faster than kmap() in kernels with HIGHMEM enabled. Furthermore, the tasks can be preempted and, when they are scheduled to run again, the kernel virtual addresses are restored and are still valid. Since the use of kmap_local_page() in exec.c is safe, it should be preferred everywhere in exec.c. As said, since kmap_local_page() can be also called from atomic context, and since remove_arg_zero() doesn't (and shouldn't ever) rely on an implicit preempt_disable(), this function can also safely replace kmap_atomic(). Therefore, replace kmap() and kmap_atomic() with kmap_local_page() in fs/exec.c. Tested with xfstests on a QEMU/KVM x86_32 VM, 6GB RAM, booting a kernel with HIGHMEM64GB enabled. Cc: Eric W. Biederman <[email protected]> Suggested-by: Ira Weiny <[email protected]> Reviewed-by: Ira Weiny <[email protected]> Signed-off-by: Fabio M. De Francesco <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-08-16Merge tag 'nios2_fixes_v6.0' of ↵Linus Torvalds5-9/+22
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux Pull NIOS2 fixes from Dinh Nguyen: - Security fixes from Al Viro * tag 'nios2_fixes_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: nios2: add force_successful_syscall_return() nios2: restarts apply only to the first sigframe we build... nios2: fix syscall restart checks nios2: traced syscall does need to check the syscall number nios2: don't leave NULLs in sys_call_table[] nios2: page fault et.al. are *not* restartable syscalls...
2022-08-16Merge tag 'spi-fix-v6.0-rc1' of ↵Linus Torvalds6-39/+112
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few fixes that came in since my pull request, the Meson fix is a little large since it's fixing all possible cases of the problem that was observed with the driver and clock API trying to share configuration by integrating the device clocking fully with the clock API rather than spot fixing the one instance that was observed" * tag 'spi-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: dt-bindings: Drop Pratyush Yadav spi: meson-spicc: add local pow2 clock ops to preserve rate between messages MAINTAINERS: rectify entry for ARM/HPE GXP ARCHITECTURE spi: spi.c: Add missing __percpu annotations in users of spi_statistics
2022-08-16Merge tag 'regulator-fix-v6.0-rc1' of ↵Linus Torvalds2-12/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A couple of small fixes that came in since my pull request, nothing major here" * tag 'regulator-fix-v6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: core: Fix missing error return from regulator_bulk_get() regulator: pca9450: Remove restrictions for regulator-name
2022-08-16x86: simplify load_unaligned_zeropad() implementationLinus Torvalds3-43/+60
The exception for the "unaligned access at the end of the page, next page not mapped" never happens, but the fixup code ends up causing trouble for compilers to optimize well. clang in particular ends up seeing it being in the middle of a loop, and tries desperately to optimize the exception fixup code that is never really reached. The simple solution is to just move all the fixups into the exception handler itself, which moves it all out of the hot case code, and means that the compiler never sees it or needs to worry about it. Acked-by: Peter Zijlstra <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-08-16locking/atomic: Make test_and_*_bit() ordered on failureHector Martin2-7/+1
These operations are documented as always ordered in include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer type use cases where one side needs to ensure a flag is left pending after some shared data was updated rely on this ordering, even in the failure case. This is the case with the workqueue code, which currently suffers from a reproducible ordering violation on Apple M1 platforms (which are notoriously out-of-order) that ends up causing the TTY layer to fail to deliver data to userspace properly under the right conditions. This change fixes that bug. Change the documentation to restrict the "no order on failure" story to the _lock() variant (for which it makes sense), and remove the early-exit from the generic implementation, which is what causes the missing barrier semantics in that case. Without this, the remaining atomic op is fully ordered (including on ARM64 LSE, as of recent versions of the architecture spec). Suggested-by: Linus Torvalds <[email protected]> Cc: [email protected] Fixes: e986a0d6cb36 ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs") Fixes: 61e02392d3c7 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()") Signed-off-by: Hector Martin <[email protected]> Acked-by: Will Deacon <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-08-16i40e: Fix to stop tx_timeout recovery if GLOBR failsAlan Brady1-1/+3
When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-08-16i40e: Fix tunnel checksum offload with fragmented trafficPrzemyslaw Patynowski1-3/+5
Fix checksum offload on VXLAN tunnels. In case, when mpls protocol is not used, set l4 header to transport header of skb. This fixes case, when user tries to offload checksums of VXLAN tunneled traffic. Steps for reproduction (requires link partner with tunnels): ip l s enp130s0f0 up ip a f enp130s0f0 ip a a 10.10.110.2/24 dev enp130s0f0 ip l s enp130s0f0 mtu 1600 ip link add vxlan12_sut type vxlan id 12 group 238.168.100.100 dev \ enp130s0f0 dstport 4789 ip l s vxlan12_sut up ip a a 20.10.110.2/24 dev vxlan12_sut iperf3 -c 20.10.110.1 #should connect Without this patch, TX descriptor was using wrong data, due to l4 header pointing wrong address. NIC would then drop those packets internally, due to incorrect TX descriptor data, which increased GLV_TEPC register. Fixes: b4fb2d33514a ("i40e: Add support for MPLS + TSO") Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Marek Szlosek <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-08-16RDMA: Handle the return code from dma_resv_wait_timeout() properlyJason Gunthorpe1-1/+7
ib_umem_dmabuf_map_pages() returns 0 on success and -ERRNO on failure. dma_resv_wait_timeout() uses a different scheme: * Returns -ERESTARTSYS if interrupted, 0 if the wait timed out, or * greater than zero on success. This results in ib_umem_dmabuf_map_pages() being non-functional as a positive return will be understood to be an error by drivers. Fixes: f30bceab16d1 ("RDMA: use dma_resv_wait() instead of extracting the fence") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Tested-by: Maor Gottlieb <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2022-08-16RDMA/erdma: Correct the max_qp and max_cq capacities of the deviceCheng Xu1-2/+2
QP0 in HW is used for CMDQ, and the rest is for RDMA QPs. So the actual max_qp capacity reported to core should be max_qp (reported by HW) - 1. So does max_cq. Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation") Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Cheng Xu <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2022-08-16RDMA/erdma: Using the key in FMR WR instead of MR structureCheng Xu1-1/+1
RDMA driver should get the MR key from FMR WR, not the MR structure passed in. Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Cheng Xu <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2022-08-16ALSA: hda/realtek: Add quirk for Lenovo Yoga7 14IAL7Takashi Iwai1-0/+1
Lenovo Yoga7 14IAL7 requires the same quirk as Lenovo Yoga9 14IAP7 for fixing the bass speaker problems. Reported-by: Pascal Gross <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-08-16RDMA/cxgb4: fix accept failure due to increased cpl_t5_pass_accept_rpl sizePotnuri Bharat Teja2-17/+10
Commit 'c2ed5611afd7' has increased the cpl_t5_pass_accept_rpl{} structure size by 8B to avoid roundup. cpl_t5_pass_accept_rpl{} is a HW specific structure and increasing its size will lead to unwanted adapter errors. Current commit reverts the cpl_t5_pass_accept_rpl{} back to its original and allocates zeroed skb buffer there by avoiding the memset for iss field. Reorder code to minimize chip type checks. Fixes: c2ed5611afd7 ("iw_cxgb4: Use memset_startat() for cpl_t5_pass_accept_rpl") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Potnuri Bharat Teja <[email protected]> Signed-off-by: Rahul Lakkireddy <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2022-08-16RDMA/mlx5: Use the proper number of portsMark Bloch1-18/+16
The cited commit allowed the driver to operate over HCAs that have 4 physical ports. Use the number of ports of the RDMA device in the for loop instead of using the struct size. Fixes: 4cd14d44b11d ("net/mlx5: Support devices with more than 2 ports") Link: https://lore.kernel.org/r/a54a56c2ede16044a29d119209b35189c662ac72.1659944855.git.leonro@nvidia.com Signed-off-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2022-08-16ALSA: hda: cs35l41: Clarify support for CSC3551 without _DSD PropertiesStefan Binding1-0/+5
For devices which use HID CSC3551, correct ACPI _DSD properties are required to be able support those systems. Add error message to clarify this. Signed-off-by: Stefan Binding <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-08-16Merge tag 'asoc-fix-v6.0-rc1' of ↵Takashi Iwai12-76/+116
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.0 A relatively large batch of fixes that came in since my pull request, none of them too major and mostly device specific apart from a series of security/robustness improvements from Takashi.
2022-08-16IB/iser: Fix login with authenticationSergey Gorenko1-1/+6
The iSER Initiator uses two types of receive buffers: - one big login buffer posted by iser_post_recvl(); - several small message buffers posted by iser_post_recvm(). The login buffer is used at the login phase and full feature phase in the discovery session. It may take a few requests and responses to complete the login phase. The message buffers are only used in the normal operational session at the full feature phase. After the commit referred in the fixes line, the login operation fails if the authentication is enabled. That happens because the Initiator posts a small receive buffer after the first response from Target. So, the next send operation fails because Target's second response does not fit into the small receive buffer. This commit adds additional checks to prevent posting small receive buffers until the full feature phase. Fixes: 39b169ea0d36 ("IB/iser: Fix RNR errors") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Sergey Gorenko <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2022-08-16ublk_drv: do not add a re-issued request aborted previously to ioucmd's ↵ZiyangZhang1-1/+17
task_work In ublk_queue_rq(), Assume current request is a re-issued request aborted previously in monitor_work because the ubq_daemon(ioucmd's task) is PF_EXITING. For this request, we cannot call io_uring_cmd_complete_in_task() anymore because at that moment io_uring context may be freed in case that no inflight ioucmd exists. Otherwise, we may cause null-deref in ctx->fallback_work. Add a check on UBLK_IO_FLAG_ABORTED to prevent the above situation. This check is safe and makes sense. Note: monitor_work sets UBLK_IO_FLAG_ABORTED and ends this request (releasing the tag). Then the request is restarted(allocating the tag) and we are here. Since releasing/allocating a tag implies smp_mb(), finding UBLK_IO_FLAG_ABORTED guarantees that here is a re-issued request aborted previously. Suggested-by: Ming Lei <[email protected]> Signed-off-by: ZiyangZhang <[email protected]> Reviewed-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-16ublk_drv: update comment for __ublk_fail_req()ZiyangZhang1-2/+3
Since __ublk_rq_task_work always fails requests immediately during exiting, __ublk_fail_req() is only called from abort context during exiting. So lock is unnecessary. Signed-off-by: ZiyangZhang <[email protected]> Reviewed-by: Ming Lei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-16ublk_drv: check ubq_daemon_is_dying() in __ublk_rq_task_work()ZiyangZhang1-3/+2
Replace direct check on PF_EXITING in __ublk_rq_task_work() by the existing wrapper. Also inline ubq_daemon_is_dying(). Reviewed-by: Ming Lei <[email protected]> Signed-off-by: ZiyangZhang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-08-16x86/entry: Fix entry_INT80_compat for Xen PV guestsJuergen Gross1-1/+1
Commit c89191ce67ef ("x86/entry: Convert SWAPGS to swapgs and remove the definition of SWAPGS") missed one use case of SWAPGS in entry_INT80_compat(). Removing of the SWAPGS macro led to asm just using "swapgs", as it is accepting instructions in capital letters, too. This in turn leads to splats in Xen PV guests like: [ 36.145223] general protection fault, maybe for address 0x2d: 0000 [#1] PREEMPT SMP NOPTI [ 36.145794] CPU: 2 PID: 1847 Comm: ld-linux.so.2 Not tainted 5.19.1-1-default #1 \ openSUSE Tumbleweed f3b44bfb672cdb9f235aff53b57724eba8b9411b [ 36.146608] Hardware name: HP ProLiant ML350p Gen8, BIOS P72 11/14/2013 [ 36.148126] RIP: e030:entry_INT80_compat+0x3/0xa3 Fix that by open coding this single instance of the SWAPGS macro. Fixes: c89191ce67ef ("x86/entry: Convert SWAPGS to swapgs and remove the definition of SWAPGS") Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Cc: <[email protected]> # 5.19 Link: https://lore.kernel.org/r/[email protected]
2022-08-16virtio: kerneldocs fixes and enhancementsRicardo Cañuelo4-11/+25
Fix variable names in some kerneldocs, naming in others. Add kerneldocs for struct vring_desc and vring_interrupt. Signed-off-by: Ricardo Cañuelo <[email protected]> Message-Id: <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Reviewed-by: Cornelia Huck <[email protected]>
2022-08-16virtio: Revert "virtio: find_vqs() add arg sizes"Michael S. Tsirkin10-22/+10
This reverts commit a10fba0377145fccefea4dc4dd5915b7ed87e546: the proposed API isn't supported on all transports but no effort was made to address this. It might not be hard to fix if we want to: maybe just rename size to size_hint and make sure legacy transports ignore the hint. But it's not sure what the benefit is in any case, so let's drop it. Fixes: a10fba037714 ("virtio: find_vqs() add arg sizes") Signed-off-by: Michael S. Tsirkin <[email protected]> Message-Id: <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.