Age | Commit message (Collapse) | Author | Files | Lines |
|
dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc.
Signed-off-by: Herve Codina <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some old IPs do not provide the hardware feature register.
On these IPs, this register is read 0x00000000.
In old driver version, this feature was handled but a regression came
with the commit f10a6a3541b4 ("stmmac: rework get_hw_feature function").
Indeed, this commit removes the return value in dma->get_hw_feature().
This return value was used to indicate the validity of retrieved
information and used later on in stmmac_hw_init() to override
priv->plat data if this hardware feature were valid.
This patch restores the return code in ->get_hw_feature() in order
to indicate the hardware feature validity and override priv->plat
data only if this hardware feature is valid.
Fixes: f10a6a3541b4 ("stmmac: rework get_hw_feature function")
Signed-off-by: Herve Codina <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
recvmsg() can enter an infinite loop if the caller provides the
MSG_WAITALL, the data present in the receive queue is not sufficient to
fulfill the request, and no more data is received by the peer.
When the above happens, mptcp_wait_data() will always return with
no wait, as the MPTCP_DATA_READY flag checked by such function is
set and never cleared in such code path.
Leveraging the above syzbot was able to trigger an RCU stall:
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 0-...!: (10499 ticks this GP) idle=0af/1/0x4000000000000000 softirq=10678/10678 fqs=1
(t=10500 jiffies g=13089 q=109)
rcu: rcu_preempt kthread starved for 10497 jiffies! g13089 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=1
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:R running task stack:28696 pid: 14 ppid: 2 flags:0x00004000
Call Trace:
context_switch kernel/sched/core.c:4955 [inline]
__schedule+0x940/0x26f0 kernel/sched/core.c:6236
schedule+0xd3/0x270 kernel/sched/core.c:6315
schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1955
rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2128
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 8510 Comm: syz-executor827 Not tainted 5.15.0-rc2-next-20210920-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:bytes_is_nonzero mm/kasan/generic.c:84 [inline]
RIP: 0010:memory_is_nonzero mm/kasan/generic.c:102 [inline]
RIP: 0010:memory_is_poisoned_n mm/kasan/generic.c:128 [inline]
RIP: 0010:memory_is_poisoned mm/kasan/generic.c:159 [inline]
RIP: 0010:check_region_inline mm/kasan/generic.c:180 [inline]
RIP: 0010:kasan_check_range+0xc8/0x180 mm/kasan/generic.c:189
Code: 38 00 74 ed 48 8d 50 08 eb 09 48 83 c0 01 48 39 d0 74 7a 80 38 00 74 f2 48 89 c2 b8 01 00 00 00 48 85 d2 75 56 5b 5d 41 5c c3 <48> 85 d2 74 5e 48 01 ea eb 09 48 83 c0 01 48 39 d0 74 50 80 38 00
RSP: 0018:ffffc9000cd676c8 EFLAGS: 00000283
RAX: ffffed100e9a110e RBX: ffffed100e9a110f RCX: ffffffff88ea062a
RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff888074d08870
RBP: ffffed100e9a110e R08: 0000000000000001 R09: ffff888074d08877
R10: ffffed100e9a110e R11: 0000000000000000 R12: ffff888074d08000
R13: ffff888074d08000 R14: ffff888074d08088 R15: ffff888074d08000
FS: 0000555556d8e300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
S: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000180 CR3: 0000000068909000 CR4: 00000000001506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
instrument_atomic_read_write include/linux/instrumented.h:101 [inline]
test_and_clear_bit include/asm-generic/bitops/instrumented-atomic.h:83 [inline]
mptcp_release_cb+0x14a/0x210 net/mptcp/protocol.c:3016
release_sock+0xb4/0x1b0 net/core/sock.c:3204
mptcp_wait_data net/mptcp/protocol.c:1770 [inline]
mptcp_recvmsg+0xfd1/0x27b0 net/mptcp/protocol.c:2080
inet6_recvmsg+0x11b/0x5e0 net/ipv6/af_inet6.c:659
sock_recvmsg_nosec net/socket.c:944 [inline]
____sys_recvmsg+0x527/0x600 net/socket.c:2626
___sys_recvmsg+0x127/0x200 net/socket.c:2670
do_recvmmsg+0x24d/0x6d0 net/socket.c:2764
__sys_recvmmsg net/socket.c:2843 [inline]
__do_sys_recvmmsg net/socket.c:2866 [inline]
__se_sys_recvmmsg net/socket.c:2859 [inline]
__x64_sys_recvmmsg+0x20b/0x260 net/socket.c:2859
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fc200d2dc39
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc5758e5a8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fc200d2dc39
RDX: 0000000000000002 RSI: 00000000200017c0 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000f0b5ff
R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000000003
R13: 00007ffc5758e5d0 R14: 00007ffc5758e5c0 R15: 0000000000000003
Fix the issue by replacing the MPTCP_DATA_READY bit with direct
inspection of the msk receive queue.
Reported-and-tested-by: [email protected]
Fixes: 7a6a6cbc3e59 ("mptcp: recvmsg() can drain data from multiple subflow")
Signed-off-by: Paolo Abeni <[email protected]>
Signed-off-by: Mat Martineau <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
It made -Werror sad.
Signed-off-by: Adam Borowski <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Ser Olmy reported a boot failure:
init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \
in libc-2.33.so[b7bed000+156000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU: 0 PID: 1 Comm: init Tainted: G W 5.14.9 #1
Hardware name: Hewlett-Packard HP PC/HP Board, BIOS JD.00.06 12/06/2001
Call Trace:
dump_stack_lvl
dump_stack
panic
do_exit.cold
do_group_exit
get_signal
arch_do_signal_or_restart
? force_sig_info_to_task
? force_sig
exit_to_user_mode_prepare
syscall_exit_to_user_mode
do_int80_syscall_32
entry_INT80_32
on an old 32-bit Intel CPU:
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
microcode : 0x3
Ser bisected the problem to the commit in Fixes.
tglx suggested reverting the rejection of invalid MXCSR values which
this commit introduced and replacing it with what the old code did -
simply masking them out to zero.
Further debugging confirmed his suggestion:
fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf
WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540
so restore the original behavior only for 32-bit kernels where you have
ancient machines with buggy hardware. For 32-bit programs on 64-bit
kernels, user space which supplies wrong MXCSR values is considered
malicious so fail the sigframe restoration there.
Fixes: 6f9866a166cd ("x86/fpu/signal: Let xrstor handle the features to init")
Reported-by: Ser Olmy <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Ser Olmy <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.15-2021-10-06:
amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix
amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Rebased drm-misc-fixes for v5.15-rc5:
- Dropped vc4 patches.
- Compiler fix for vc4.
- Cursor fix for nouveau.
- Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support.
- Small rockchip fixes.
- Fix DT bindings indent for ili9341.
- Fix y030xx067a init sequence to not get a yellow tint.
- Kconfig fix for fb_simple vs simpledrm.
- Assorted nouvaeu memory leaks.
- Fix gbefb when built with COMPILE_TEST.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.15-rc5:
- Fix RKL HDMI audio
- Fix runtime pm imbalance on i915_gem_shrink() error path
- Fix Type-C port access before hw/sw state sync
- Fix VBT backlight struct version/size check
- Fix VT-d async flip on SKL/BXT with plane stretch workaround
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
These can be replaced by statx(). Since rv32 has a 64-bit time_t we
just never ended up with them in the first place. This is now an error
due to -Werror.
Suggested-by: Arnd Bergmann <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Bug fixes for NFSD error handling paths"
* tag 'nfsd-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Keep existing listeners on portlist error
SUNRPC: fix sign error causing rpcsec_gss drops
nfsd: Fix a warning for nfsd_file_close_inode
nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
nfsd: fix error handling of register_pernet_subsys() in init_nfsd()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a larger than normal update for Arm SoC specific code, most of
it in device trees, but also drivers and the omap and at91/sama7
platforms:
- There are four new entries to the MAINTAINERS file: Sven Peter and
Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
and Vignesh Raghavendra for TI K3
- Build fixes to address randconfig warnings in sharpsl, dove, omap1,
and qcom platforms as well as the scmi and op-tee subsystems
- Regression fixes for missing CONFIG_FB and other options for
several defconfigs
- Several bug fixes for the newly added Microchip SAMA7 platform,
mostly regarding power management
- Missing SMP barriers to protect accesses to SCMI virtio device
- Regression fixes for TI OMAP, including a boot-time hang on am335x.
- Lots of bug fixes for NXP i.MX, mostly addressing incorrect
settings in devicetree files, and one revert for broken suspend.
- Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
of schema warnings.
- Regression fixes for qualcomm SoC specific drivers and devicetree
files, reverting an mdt_loader change and at least pastially
reverting some of the 5.15 DTS changes, plus some minor bugfixes"
* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
firmware: arm_scmi: Add proper barriers to scmi virtio device
firmware: arm_scmi: Simplify spinlocks in virtio transport
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
ARM: sharpsl_param: work around -Wstringop-overread warning
ARM: defconfig: gemini: Restore framebuffer
ARM: dove: mark 'putc' as inline
ARM: omap1: move omap15xx local bus handling to usb.c
MAINTAINERS: Add Vignesh to TI K3 platform maintainership
arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
arm64: dts: ls1028a: fix eSDHC2 node
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
ARM: at91: pm: preload base address of controllers in tlb
ARM: at91: pm: group constants and addresses loading
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
...
|
|
Error injection testing uncovered a case where we'd end up with a
corrupt file system with a missing extent in the middle of a file. This
occurs because the if statement to decide if we should abort is wrong.
The only way we would abort in this case is if we got a ret !=
-EOPNOTSUPP and we called from the file clone code. However the
prealloc code uses this path too. Instead we need to abort if there is
an error, and the only error we _don't_ abort on is -EOPNOTSUPP and only
if we came from the clone file code.
CC: [email protected] # 5.10+
Reviewed-by: Nikolay Borisov <[email protected]>
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
At replay_one_name(), we are treating any error from btrfs_lookup_inode()
as if the inode does not exists. Fix this by checking for an error and
returning it to the caller.
CC: [email protected] # 4.14+
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
btrfs_lookup_dir_index_item() and btrfs_lookup_dir_item() lookup for dir
entries and both are used during log replay or when updating a log tree
during an unlink.
However when the dir item does not exists, btrfs_lookup_dir_item() returns
NULL while btrfs_lookup_dir_index_item() returns PTR_ERR(-ENOENT), and if
the dir item exists but there is no matching entry for a given name or
index, both return NULL. This makes the call sites during log replay to
be more verbose than necessary and it makes it easy to miss this slight
difference. Since we don't need to distinguish between those two cases,
make btrfs_lookup_dir_index_item() always return NULL when there is no
matching directory entry - either because there isn't any dir entry or
because there is one but it does not match the given name and index.
Also rename the argument 'objectid' of btrfs_lookup_dir_index_item() to
'index' since it is supposed to match an index number, and the name
'objectid' is not very good because it can easily be confused with an
inode number (like the inode number a dir entry points to).
CC: [email protected] # 4.14+
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
At __inode_add_ref(), we treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.
So fix that and return the error to the caller when it is not -ENOENT.
CC: [email protected] # 4.14+
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
At replay_one_one(), we are treating any error returned from
btrfs_lookup_dir_item() or from btrfs_lookup_dir_index_item() as meaning
that there is no existing directory entry in the fs/subvolume tree.
This is not correct since we can get errors such as, for example, -EIO
when reading extent buffers while searching the fs/subvolume's btree.
So fix that and return the error to the caller when it is not -ENOENT.
CC: [email protected] # 4.14+
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Currently inode_in_dir() ignores errors returned from
btrfs_lookup_dir_index_item() and from btrfs_lookup_dir_item(), treating
any errors as if the directory entry does not exists in the fs/subvolume
tree, which is obviously not correct, as we can get errors such as -EIO
when reading extent buffers while searching the fs/subvolume's tree.
Fix that by making inode_in_dir() return the errors and making its only
caller, add_inode_ref(), deal with returned errors as well.
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
I hit a stuck relocation on btrfs/061 during my overnight testing. This
turned out to be because we had left over extent entries in our extent
root for a data reloc inode that no longer existed. This happened
because in btrfs_drop_extents() we only update refs if we have SHAREABLE
set or we are the tree_root. This regression was introduced by
aeb935a45581 ("btrfs: don't set SHAREABLE flag for data reloc tree")
where we stopped setting SHAREABLE for the data reloc tree.
The problem here is we actually do want to update extent references for
data extents in the data reloc tree, in fact we only don't want to
update extent references if the file extents are in the log tree.
Update this check to only skip updating references in the case of the
log tree.
This is relatively rare, because you have to be running scrub at the
same time, which is what btrfs/061 does. The data reloc inode has its
extents pre-allocated, and then we copy the extent into the
pre-allocated chunks. We theoretically should never be calling
btrfs_drop_extents() on a data reloc inode. The exception of course is
with scrub, if our pre-allocated extent falls inside of the block group
we are scrubbing, then the block group will be marked read only and we
will be forced to cow that extent. This means we will call
btrfs_drop_extents() on that range when we COW that file extent.
This isn't really problematic if we do this, the data reloc inode
requires that our extent lengths match exactly with the extent we are
copying, thankfully we validate the extent is correct with
get_new_location(), so if we happen to COW only part of the extent we
won't link it in when we do the relocation, so we are safe from any
other shenanigans that arise because of this interaction with scrub.
Fixes: aeb935a45581 ("btrfs: don't set SHAREABLE flag for data reloc tree")
CC: [email protected] # 5.8+
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
[BUG]
There is a bug report that injected ENOMEM error could leave a tree
block locked while we return to user-space:
BTRFS info (device loop0): enabling ssd optimizations
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
CPU: 0 PID: 7579 Comm: syz-executor Not tainted 5.15.0-rc1 #16
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106
fail_dump lib/fault-inject.c:52 [inline]
should_fail+0x13c/0x160 lib/fault-inject.c:146
should_failslab+0x5/0x10 mm/slab_common.c:1328
slab_pre_alloc_hook.constprop.99+0x4e/0xc0 mm/slab.h:494
slab_alloc_node mm/slub.c:3120 [inline]
slab_alloc mm/slub.c:3214 [inline]
kmem_cache_alloc+0x44/0x280 mm/slub.c:3219
btrfs_alloc_delayed_extent_op fs/btrfs/delayed-ref.h:299 [inline]
btrfs_alloc_tree_block+0x38c/0x670 fs/btrfs/extent-tree.c:4833
__btrfs_cow_block+0x16f/0x7d0 fs/btrfs/ctree.c:415
btrfs_cow_block+0x12a/0x300 fs/btrfs/ctree.c:570
btrfs_search_slot+0x6b0/0xee0 fs/btrfs/ctree.c:1768
btrfs_insert_empty_items+0x80/0xf0 fs/btrfs/ctree.c:3905
btrfs_new_inode+0x311/0xa60 fs/btrfs/inode.c:6530
btrfs_create+0x12b/0x270 fs/btrfs/inode.c:6783
lookup_open+0x660/0x780 fs/namei.c:3282
open_last_lookups fs/namei.c:3352 [inline]
path_openat+0x465/0xe20 fs/namei.c:3557
do_filp_open+0xe3/0x170 fs/namei.c:3588
do_sys_openat2+0x357/0x4a0 fs/open.c:1200
do_sys_open+0x87/0xd0 fs/open.c:1216
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x34/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x46ae99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48
89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d
01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f46711b9c48 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 000000000078c0a0 RCX: 000000000046ae99
RDX: 0000000000000000 RSI: 00000000000000a1 RDI: 0000000020005800
RBP: 00007f46711b9c80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000017
R13: 0000000000000000 R14: 000000000078c0a0 R15: 00007ffc129da6e0
================================================
WARNING: lock held when returning to user space!
5.15.0-rc1 #16 Not tainted
------------------------------------------------
syz-executor/7579 is leaving the kernel with locks still held!
1 lock held by syz-executor/7579:
#0: ffff888104b73da8 (btrfs-tree-01/1){+.+.}-{3:3}, at:
__btrfs_tree_lock+0x2e/0x1a0 fs/btrfs/locking.c:112
[CAUSE]
In btrfs_alloc_tree_block(), after btrfs_init_new_buffer(), the new
extent buffer @buf is locked, but if later operations like adding
delayed tree ref fail, we just free @buf without unlocking it,
resulting above warning.
[FIX]
Unlock @buf in out_free_buf: label.
Reported-by: Hao Sun <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/CACkBjsZ9O6Zr0KK1yGn=1rQi6Crh1yeCRdTSBxx9R99L4xdn-Q@mail.gmail.com/
CC: [email protected] # 5.4+
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
arm/fixes
Apple SoC fixes for 5.15; just two MAINTAINERS updates.
- MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
- MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
* tag 'asahi-soc-fixes-5.15' of https://github.com/AsahiLinux/linux:
MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
SCMI fixes for v5.15
A few fixes addressing:
- Kconfig dependency between VIRTIO and ARM_SCMI_PROTOCOL
- Link-time error with __exit annotation for virtio_scmi_exit
- Unnecessary nested irqsave/irqrestore spinlocks in virtio transport
- Missing SMP barriers to protect accesses to SCMI virtio device
* tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add proper barriers to scmi virtio device
firmware: arm_scmi: Simplify spinlocks in virtio transport
firmware: arm_scmi: Remove __exit annotation
firmware: arm_scmi: Fix virtio transport Kconfig dependency
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.15
Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:
- Fix compiler warning for sysc_init_soc() that got recently introduced
- Fix external abort for am335x pruss as otherwise some am335x will hang
- Use CLKDM_NOAUTO quirk also for dra7 dcan1
- Fix older NAND device node regression for omap3-sdp
* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
soc: ti: omap-prm: Fix external abort for am335x pruss
bus: ti-sysc: Add break in switch statement in sysc_init_soc()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfslib, cachefiles and afs fixes from David Howells:
- Fix another couple of oopses in cachefiles tracing stemming from the
possibility of passing in a NULL object pointer
- Fix netfs_clear_unread() to set READ on the iov_iter so that source
it is passed to doesn't do the wrong thing (some drivers look at the
flag on iov_iter rather than other available information to determine
the direction)
- Fix afs_launder_page() to write back at the correct file position on
the server so as not to corrupt data
* tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix afs_launder_page() to set correct start file position
netfs: Fix READ/WRITE confusion when calling iov_iter_xarray()
cachefiles: Fix oops with cachefiles_cull() due to NULL object
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix plugin static linking with libopencsd on ARM and ARM64
- Add missing -lstdc++ when linking with libopencsd
- Add missing topdown metrics events to 'perf test attr'
- Plug leak sys_event_tables list after processing JSON vendor events
entries
- Sync sound/asound.h copy with the kernel sources
* tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tests attr: Add missing topdown metrics events
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf build: Fix plugin static linking with libopencsd on ARM and ARM64
perf build: Add missing -lstdc++ when linking with libopencsd
perf jevents: Free the sys_event_tables list after processing entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from xfrm, bpf, netfilter, and wireless.
Current release - regressions:
- xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new
value in the middle of an enum
- unix: fix an issue in unix_shutdown causing the other end
read/write failures
- phy: mdio: fix memory leak
Current release - new code bugs:
- mlx5e: improve MQPRIO resiliency against bad configs
Previous releases - regressions:
- bpf: fix integer overflow leading to OOB access in map element
pre-allocation
- stmmac: dwmac-rk: fix ethernet on rk3399 based devices
- netfilter: conntrack: fix boot failure with
nf_conntrack.enable_hooks=1
- brcmfmac: revert using ISO3166 country code and 0 rev as fallback
- i40e: fix freeing of uninitialized misc IRQ vector
- iavf: fix double unlock of crit_lock
Previous releases - always broken:
- bpf, arm: fix register clobbering in div/mod implementation
- netfilter: nf_tables: correct issues in netlink rule change event
notifications
- dsa: tag_dsa: fix mask for trunked packets
- usb: r8152: don't resubmit rx immediately to avoid soft lockup on
device unplug
- i40e: fix endless loop under rtnl if FW fails to correctly respond
to capability query
- mlx5e: fix rx checksum offload coexistence with ipsec offload
- mlx5: force round second at 1PPS out start time and allow it only
in supported clock modes
- phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
sequence
Misc:
- xfrm: slightly rejig the new policy uAPI to make it less cryptic"
* tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
net: prefer socket bound to interface when not in VRF
iavf: fix double unlock of crit_lock
i40e: Fix freeing of uninitialized misc IRQ vector
i40e: fix endless loop under rtnl
dt-bindings: net: dsa: marvell: fix compatible in example
ionic: move filter sync_needed bit set
gve: report 64bit tx_bytes counter from gve_handle_report_stats()
gve: fix gve_get_stats()
rtnetlink: fix if_nlmsg_stats_size() under estimation
gve: Properly handle errors in gve_assign_qpl
gve: Avoid freeing NULL pointer
gve: Correct available tx qpl check
unix: Fix an issue in unix_shutdown causing the other end read/write failures
net: stmmac: trigger PCS EEE to turn off on link down
net: pcs: xpcs: fix incorrect steps on disable EEE
netlink: annotate data races around nlk->bound
net: pcs: xpcs: fix incorrect CL37 AN sequence
net: sfp: Fix typo in state machine debug string
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
net: bridge: fix under estimation in br_get_linkxstats_size()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Replace uuid.h with types.h in a header (Andy Shevchenko)
- Avoid sleeping in atomic context in PCI driver (Long Li)
- Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov)
* tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Avoid erroneously sending IPI to 'self'
hyper-v: Replace uuid.h with types.h
PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
|
|
If acpi_pci_find_companion() is called for a device whose parent
pointer is NULL, it will crash when attempting to get the ACPI
companion of the parent due to a NULL pointer dereference in
the ACPI_COMPANION() macro.
This was not a problem before commit 375553a93201 ("PCI: Setup ACPI
fwnode early and at the same time with OF") that made pci_setup_device()
call pci_set_acpi_fwnode() and so it allowed devices with NULL parent
pointers to be passed to acpi_pci_find_companion() which is the case
in pci_iov_add_virtfn(), for instance.
Fix this issue by making acpi_pci_find_companion() check the device's
parent pointer upfront and bail out if it is NULL.
While pci_iov_add_virtfn() can be changed to set the device's parent
pointer before calling pci_setup_device() for it, checking pointers
against NULL before dereferencing them is prudent anyway and looking
for ACPI companions of virtual functions isn't really useful.
Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF")
Link: https://lore.kernel.org/linux-acpi/[email protected]/
Reported-by: Niklas Schnelle <[email protected]>
Tested-by: Niklas Schnelle <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
|
|
Hector suggested I should add myself to help him maintain the
platform.
Acked-by: Hector Martin <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
|
|
Add myself as a reviewer for Asahi Linux (Apple M1) patches.
I would like to be CC'ed on Asahi Linux patches for review and testing.
I am also collecting Asahi Linux patches downstream, rebasing on
linux-next periodically, and would like to be notified of what to
cherry-pick from lists.
Cc: Hector Martin <[email protected]>
Cc: Sven Peter <[email protected]>
Acked-by: Hector Martin <[email protected]>
Acked-by: Sven Peter <[email protected]>
Signed-off-by: Alyssa Rosenzweig <[email protected]>
|
|
Marios reported kernel oops from fuse driver when ksmbd call
mark_inode_dirty(). This patch directly update ->i_ctime after removing
mark_inode_ditry() and notify_change will put inode to dirty list.
Cc: Tom Talpey <[email protected]>
Cc: Ronnie Sahlberg <[email protected]>
Cc: Ralph Böhme <[email protected]>
Cc: Hyunchul Lee <[email protected]>
Reported-by: Marios Makassikis <[email protected]>
Tested-by: Marios Makassikis <[email protected]>
Acked-by: Hyunchul Lee <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Fix version mismatch with out of tree, This updated version will be
matched with ksmbd-tools.
Cc: Tom Talpey <[email protected]>
Cc: Ronnie Sahlberg <[email protected]>
Cc: Ralph Böhme <[email protected]>
Cc: Steve French <[email protected]>
Cc: Hyunchul Lee <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Tom suggested to use buf_data_size that is already calculated, to verify
these offsets.
Cc: Tom Talpey <[email protected]>
Cc: Ronnie Sahlberg <[email protected]>
Cc: Ralph Böhme <[email protected]>
Suggested-by: Tom Talpey <[email protected]>
Acked-by: Hyunchul Lee <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Although ksmbd doesn't send SMB2.0 support in supported dialect list of smb
negotiate response, There is the leftover of smb2.0 dialect.
This patch remove it not to support SMB2.0 in ksmbd.
Cc: Tom Talpey <[email protected]>
Cc: Ronnie Sahlberg <[email protected]>
Cc: Ralph Böhme <[email protected]>
Cc: Hyunchul Lee <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
When invalid data offset and data length in request,
ksmbd_smb2_check_message check strictly and doesn't allow to process such
requests.
Cc: Tom Talpey <[email protected]>
Cc: Ronnie Sahlberg <[email protected]>
Cc: Ralph Böhme <[email protected]>
Acked-by: Hyunchul Lee <[email protected]>
Reviewed-by: Ralph Boehme <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Now that SCM can be a loadable module, we have to add another
dependency to avoid link failures when ipa or adreno-gpu are
built-in:
aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':
ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'
ld.lld: error: undefined symbol: qcom_scm_is_available
>>> referenced by adreno_gpu.c
>>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a
This can happen when CONFIG_ARCH_QCOM is disabled and we don't select
QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd
use a similar dependency here to what we have for QCOM_RPROC_COMMON,
but that causes dependency loops from other things selecting QCOM_SCM.
This appears to be an endless problem, so try something different this
time:
- CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on'
but that is simply selected by all of its users
- All the stubs in include/linux/qcom_scm.h can go away
- arm-smccc.h needs to provide a stub for __arm_smccc_smc() to
allow compile-testing QCOM_SCM on all architectures.
- To avoid a circular dependency chain involving RESET_CONTROLLER
and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement.
According to my testing this still builds fine, and the QCOM
platform selects this symbol already.
Acked-by: Kalle Valo <[email protected]>
Acked-by: Alex Elder <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Compile-testing drivers that require access to a firmware layer
fails when that firmware symbol is unavailable. This happened
twice this week:
- My proposed to change to rework the QCOM_SCM firmware symbol
broke on ppc64 and others.
- The cs_dsp firmware patch added device specific firmware loader
into drivers/firmware, which broke on the same set of
architectures.
We should probably do the same thing for other subsystems as well,
but fix this one first as this is a dependency for other patches
getting merged.
Reviewed-by: Bjorn Andersson <[email protected]>
Reviewed-by: Charles Keepax <[email protected]>
Acked-by: Will Deacon <[email protected]>
Acked-by: Bjorn Andersson <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Charles Keepax <[email protected]>
Cc: Simon Trimmer <[email protected]>
Cc: Michael Ellerman <[email protected]>
Reviewed-by: Mark Brown <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The commit 6da5b0f027a8 ("net: ensure unbound datagram socket to be
chosen when not in a VRF") modified compute_score() so that a device
match is always made, not just in the case of an l3mdev skb, then
increments the score also for unbound sockets. This ensures that
sockets bound to an l3mdev are never selected when not in a VRF.
But as unbound and bound sockets are now scored equally, this results
in the last opened socket being selected if there are matches in the
default VRF for an unbound socket and a socket bound to a dev that is
not an l3mdev. However, handling prior to this commit was to always
select the bound socket in this case. Reinstate this handling by
incrementing the score only for bound sockets. The required isolation
due to choosing between an unbound socket and a socket bound to an
l3mdev remains in place due to the device match always being made.
The same approach is taken for compute_score() for stream sockets.
Fixes: 6da5b0f027a8 ("net: ensure unbound datagram socket to be chosen when not in a VRF")
Fixes: e78190581aff ("net: ensure unbound stream socket to be chosen when not in a VRF")
Signed-off-by: Mike Manning <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-10-07
We've added 7 non-merge commits during the last 8 day(s) which contain
a total of 8 files changed, 38 insertions(+), 21 deletions(-).
The main changes are:
1) Fix ARM BPF JIT to preserve caller-saved regs for DIV/MOD JIT-internal
helper call, from Johan Almbladh.
2) Fix integer overflow in BPF stack map element size calculation when
used with preallocation, from Tatsuhiko Yasumatsu.
3) Fix an AF_UNIX regression due to added BPF sockmap support related
to shutdown handling, from Jiang Wang.
4) Fix a segfault in libbpf when generating light skeletons from objects
without BTF, from Kumar Kartikeya Dwivedi.
5) Fix a libbpf memory leak in strset to free the actual struct strset
itself, from Andrii Nakryiko.
6) Dual-license bpf_insn.h similarly as we did for libbpf and bpftool,
with ACKs from all contributors, from Luca Boccassi.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
On pseries LPAR when an empty slot is assigned to partition OR in single
LPAR mode, kdump kernel crashes during issuing PHB reset.
In the kdump scenario, we traverse all PHBs and issue reset using the
pe_config_addr of the first child device present under each PHB. However
the code assumes that none of the PHB slots can be empty and uses
list_first_entry() to get the first child device under the PHB. Since
list_first_entry() expects the list to be non-empty, it returns an
invalid pci_dn entry and ends up accessing NULL phb pointer under
pci_dn->phb causing kdump kernel crash.
This patch fixes the below kdump kernel crash by skipping empty slots:
audit: initializing netlink subsys (disabled)
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor menu
pstore: Registered nvram as persistent store backend
Issue PHB reset ...
audit: type=2000 audit(1631267818.000:1): state=initialized audit_enabled=0 res=1
BUG: Kernel NULL pointer dereference on read at 0x00000268
Faulting instruction address: 0xc000000008101fb0
Oops: Kernel access of bad area, sig: 7 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/7 Not tainted 5.14.0 #1
NIP: c000000008101fb0 LR: c000000009284ccc CTR: c000000008029d70
REGS: c00000001161b840 TRAP: 0300 Not tainted (5.14.0)
MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000224 XER: 20040002
CFAR: c000000008101f0c DAR: 0000000000000268 DSISR: 00080000 IRQMASK: 0
...
NIP pseries_eeh_get_pe_config_addr+0x100/0x1b0
LR __machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350
Call Trace:
0xc00000001161bb80 (unreliable)
__machine_initcall_pseries_eeh_pseries_init+0x2cc/0x350
do_one_initcall+0x60/0x2d0
kernel_init_freeable+0x350/0x3f8
kernel_init+0x3c/0x17c
ret_from_kernel_thread+0x5c/0x64
Fixes: 5a090f7c363fd ("powerpc/pseries: PCIE PHB reset")
Signed-off-by: Mahesh Salgaonkar <[email protected]>
[mpe: Tweak wording and trim oops]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/163215558252.413351.8600189949820258982.stgit@jupiter
|
|
At interrupt exit, kuap_kernel_restore() calls kuap_unlock() with the
value contained in regs->kuap. However, when regs->kuap contains
0xffffffff it means that KUAP was not unlocked so calling kuap_unlock()
is unrelevant and results in jeopardising the contents of kernel space
segment registers.
So check that regs->kuap doesn't contain KUAP_NONE before calling
kuap_unlock(). In the meantime it also means that if KUAP has not
been correcly locked back at interrupt exit, it must be locked
before continuing. This is done by checking the content of
current->thread.kuap which was returned by kuap_get_and_assert_locked()
Fixes: 16132529cee5 ("powerpc/32s: Rework Kernel Userspace Access Protection")
Reported-by: Stan Johnson <[email protected]>
Signed-off-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/0d0c4d0f050a637052287c09ba521bad960a2790.1631715131.git.christophe.leroy@csgroup.eu
|
|
The IPR drivers tests for MSI support at probe time with MSI vector 0
and when done, frees the IRQ with free_irq(). This test was introduced
by 95fecd90397e ("ipr: add test for MSI interrupt support") as an
improvement of commit 5a9ef25b14d3 ("[SCSI] ipr: add MSI support")
because a boot failure was reported on a Bimini PowerPC system:
https://lore.kernel.org/r/[email protected]
It was finally decided to remove MSI support on Bimini systems in
6eb0ac03899a ("powerpc/maple: Add a quirk to disable MSI for IPR on
Bimini").
Linux 5.15-rc1 added MSI domain support to the pseries machine and
when free_irq is called() in the driver, msi_domain_deactivate() also
is. This resets the MSI table entry of the associate vector by calling
__pci_write_msi_msg() with an empty message and breaks any further
activation of the same vector. In the case of the IPR driver, it
breaks the initialization sequence of the IOA.
Introduce an empty irq_write_msi_msg() handler in the MSI domain of
the pseries machine to avoid clearing the MSI vector entry. Updating
the entry is not strictly necessary since it is initialized by the
underlying hypervisor, PowerVM or QEMU/KVM.
Fixes: a5f3d2c17b07 ("powerpc/pseries/pci: Add MSI domains")
Signed-off-by: Cédric Le Goater <[email protected]>
Reported-by: Abdul Haleem <[email protected]>
Tested-by: Mahesh Salgaonkar <[email protected]>
[mpe: Tweak comment wording and formatting slightly]
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2021-10-07
1) Fix a sysbot reported shift-out-of-bounds in xfrm_get_default.
From Pavel Skripkin.
2) Fix XFRM_MSG_MAPPING ABI breakage. The new XFRM_MSG_MAPPING
messages were accidentally not paced at the end.
Fix by Eugene Syromiatnikov.
3) Fix the uapi for the default policy, use explicit field and macros
and make it accessible to userland.
From Nicolas Dichtel.
4) Fix a missing rcu lock in xfrm_notify_userpolicy().
From Nicolas Dichtel.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-10-06
This series contains updates to i40e and iavf drivers.
Jiri Benc expands an error check to prevent infinite loop for i40e.
Sylwester prevents freeing of uninitialized IRQ vector to resolve a
kernel oops for i40e.
Stefan Assmann fixes a double mutex unlock for iavf.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The machine check handler is not considered NMI on 64s. The early
handler is the true NMI handler, and then it schedules the
machine_check_exception handler to run when interrupts are enabled.
This works fine except the case of an unrecoverable MCE, where the true
NMI is taken when MSR[RI] is clear, it can not recover, so it calls
machine_check_exception directly so something might be done about it.
Calling an async handler from NMI context can result in irq state and
other things getting corrupted. This can also trigger the BUG at
arch/powerpc/include/asm/interrupt.h:168
BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE));
Fix this by making an _async version of the handler which is called
in the normal case, and a NMI version that is called for unrecoverable
interrupts.
Fixes: 2b43dd7653cc ("powerpc/64: enable MSR[EE] in irq replay pt_regs")
Signed-off-by: Nicholas Piggin <[email protected]>
Tested-by: Cédric Le Goater <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
If a NMI hits early in an interrupt handler before the irq soft-mask
state is reconciled, that can cause a false-positive BUG with a
CONFIG_PPC_IRQ_SOFT_MASK_DEBUG assertion.
Remove that assertion and instead check the case that if regs->msr has
EE clear, then regs->softe should be marked as disabled so the irq state
looks correct to NMI handlers, the same as how it's fixed up in the
case it was implicit soft-masked.
This doesn't fix a known problem -- the change that was fixed by commit
4ec5feec1ad02 ("powerpc/64s: Make NMI record implicitly soft-masked code
as irqs disabled") was the addition of a warning in the soft-nmi
watchdog interrupt which can never actually fire when MSR[EE]=0. However
it may be important if NMI handlers grow more code, and it's less
surprising to anything using 'regs' - (I tripped over this when working
in the area).
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
This can help catch bugs such as the one fixed by the previous change
to prevent _exception() from enabling irqs.
ppc32 could have a similar warning but it has no good config option to
debug this stuff (the test may be overkill to add for production
kernels).
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
_exception can be called by machine check handlers when the MCE hits
user code (e.g., pseries and powernv). This will enable local irqs
because, which is a dicey thing to do in NMI or hard irq context.
This seemed to worked out okay because a userspace MCE can basically be
treated like a synchronous interrupt (after async / imprecise MCEs are
filtered out). Since NMI and hard irq handlers have started growing
nmi_enter / irq_enter, and more irq state sanity checks, this has
started to cause problems (or at least trigger warnings).
The Fixes tag to the commit which introduced this rather than try to
work out exactly which commit was the first that could possibly cause a
problem because that may be difficult to prove.
Fixes: 9f2f79e3a3c1 ("powerpc: Disable interrupts in 64-bit kernel FP and vector faults")
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Emergency stack path was jumping into a 3: label inside the
__GEN_COMMON_BODY macro for the normal path after it had finished,
rather than jumping over it. By a small miracle this is the correct
place to build up a new interrupt frame with the existing stack
pointer, so things basically worked okay with an added weird looking
700 trap frame on top (which had the wrong ->nip so it didn't decode
bug messages either).
Fix this by avoiding using numeric labels when jumping over non-trivial
macros.
Before:
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 88 Comm: sh Not tainted 5.15.0-rc2-00034-ge057cdade6e5 #2637
NIP: 7265677368657265 LR: c00000000006c0c8 CTR: c0000000000097f0
REGS: c0000000fffb3a50 TRAP: 0700 Not tainted
MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 00000700 XER: 20040000
CFAR: c0000000000098b0 IRQMASK: 0
GPR00: c00000000006c964 c0000000fffb3cf0 c000000001513800 0000000000000000
GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299
GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8
GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001
GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8
GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158
GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300
GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80
NIP [7265677368657265] 0x7265677368657265
LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10
Call Trace:
[c0000000fffb3cf0] [c00000000000bdac] soft_nmi_common+0x13c/0x1d0 (unreliable)
--- interrupt: 700 at decrementer_common_virt+0xb8/0x230
NIP: c0000000000098b8 LR: c00000000006c0c8 CTR: c0000000000097f0
REGS: c0000000fffb3d60 TRAP: 0700 Not tainted
MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 22424282 XER: 20040000
CFAR: c0000000000098b0 IRQMASK: 0
GPR00: c00000000006c964 0000000000002400 c000000001513800 0000000000000000
GPR04: 0000000048ab0778 0000000042000000 0000000000000000 0000000000001299
GPR08: 000001e447c718ec 0000000022424282 0000000000002710 c00000000006bee8
GPR12: 9000000000009033 c0000000016b0000 00000000000000b0 0000000000000001
GPR16: 0000000000000000 0000000000000002 0000000000000000 0000000000000ff8
GPR20: 0000000000001fff 0000000000000007 0000000000000080 00007fff89d90158
GPR24: 0000000002000000 0000000002000000 0000000000000255 0000000000000300
GPR28: c000000001270000 0000000042000000 0000000048ab0778 c000000080647e80
NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230
LR [c00000000006c0c8] ___do_page_fault+0x3f8/0xb10
--- interrupt: 700
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace 6d28218e0cc3c949 ]---
After:
------------[ cut here ]------------
kernel BUG at arch/powerpc/kernel/exceptions-64s.S:491!
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in:
CPU: 0 PID: 88 Comm: login Not tainted 5.15.0-rc2-00034-ge057cdade6e5-dirty #2638
NIP: c0000000000098b8 LR: c00000000006bf04 CTR: c0000000000097f0
REGS: c0000000fffb3d60 TRAP: 0700 Not tainted
MSR: 9000000000021031 <SF,HV,ME,IR,DR,LE> CR: 24482227 XER: 00040000
CFAR: c0000000000098b0 IRQMASK: 0
GPR00: c00000000006bf04 0000000000002400 c000000001513800 c000000001271868
GPR04: 00000000100f0d29 0000000042000000 0000000000000007 0000000000000009
GPR08: 00000000100f0d29 0000000024482227 0000000000002710 c000000000181b3c
GPR12: 9000000000009033 c0000000016b0000 00000000100f0d29 c000000005b22f00
GPR16: 00000000ffff0000 0000000000000001 0000000000000009 00000000100eed90
GPR20: 00000000100eed90 0000000010000000 000000001000a49c 00000000100f1430
GPR24: c000000001271868 0000000002000000 0000000000000215 0000000000000300
GPR28: c000000001271800 0000000042000000 00000000100f0d29 c000000080647860
NIP [c0000000000098b8] decrementer_common_virt+0xb8/0x230
LR [c00000000006bf04] ___do_page_fault+0x234/0xb10
Call Trace:
Instruction dump:
4182000c 39400001 48000008 894d0932 714a0001 39400008 408225fc 718a4000
7c2a0b78 3821fcf0 41c20008 e82d0910 <0981fcf0> f92101a0 f9610170 f9810178
---[ end trace a5dbd1f5ea4ccc51 ]---
Fixes: 0a882e28468f4 ("powerpc/64s/exception: remove bad stack branch")
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Special case handling of the smallest 32-bit negative number for BPF_SUB.
Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32")
Signed-off-by: Naveen N. Rao <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/7135360a0cdf70adedbccf9863128b8daef18764.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Suppress emitting zero extend instruction for 64-bit BPF_END_FROM_[L|B]E
operation.
Fixes: 51c66ad849a703 ("powerpc/bpf: Implement extended BPF on PPC32")
Signed-off-by: Naveen N. Rao <[email protected]>
Reviewed-by: Christophe Leroy <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/b4e3c3546121315a8e2059b19a1bda84971816e4.1633464148.git.naveen.n.rao@linux.vnet.ibm.com
|