aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-06-08drm/nv50: fix iommu errors caused by device reading from address 0Ben Skeggs1-2/+8
Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/nouveau: off by one in init_i2c_device_find()Dan Carpenter1-1/+1
dcb->i2c[] has DCB_MAX_NUM_I2C_ENTRIES entries. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08nouveau: off by one in nv50_gpio_location()Dan Carpenter1-1/+1
If "gpio->line" is 32 then "nv50_gpio_reg[gpio->line >> 3]" reads past the end of the array. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/nouveau: completely fail init if we fail to map the PRAMIN BARBen Skeggs1-12/+7
On cards where there's a specific BAR for PRAMIN, we used to try and fall back to the "legacy" aperture within the mmio BAR. This is doomed to cause problems, so lets just fail completely as there's obviously something else very wrong anyway. Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/nouveau: match U/DP script against SOR linkBen Skeggs1-3/+20
It appears version 0x21 'U' and 'd' tables require us to take the SOR link into account when selecting the appropriate table for a particular output. Signed-off-by: Ben Skeggs <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-07Merge git://git.infradead.org/~dwmw2/mtd-2.6.35Linus Torvalds6-90/+106
* git://git.infradead.org/~dwmw2/mtd-2.6.35: jffs2: update ctime when changing the file's permission by setfacl jffs2: Fix NFS race by using insert_inode_locked() jffs2: Fix in-core inode leaks on error paths mtd: Fix NAND submenu mtd/r852: update card detect early. mtd/r852: Fixes in case of DMA timeout mtd/r852: register IRQ as last step drivers/mtd: Use memdup_user docbook: make mtd nand module init static
2010-06-07Merge branch 'upstream-linus' of ↵Linus Torvalds5-27/+30
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: ahci: redo stopping DMA engines on empty ports sata_sil24: fix kernel panic on ARM caused by unaligned access in sata_sil24 ahci: add pci quirk for JMB362 sata_via: explain the magic fix
2010-06-08drm/radeon/kms/pm: resurrect printing power statesRafał Miłecki1-0/+45
debug only agd5f: rebased Signed-off-by: Rafał Miłecki <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms: add trivial debugging for voltageRafał Miłecki4-0/+5
agd5f: rebased Signed-off-by: Rafał Miłecki <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms/r600+: use voltage from requested clock mode (v3)Rafał Miłecki3-10/+12
This fixes FDO bug #28375, it's kind of regression, so quite important to have it for .35. V2: Fix on RV770+ as well. All other chipsets have only one clock mode per state. V3: I'm out of luck today. Grepped for voltage in r*.c and missed evergreen. agd5f: rebased Signed-off-by: Rafał Miłecki <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms/pm: track current voltage (v2)Alex Deucher6-7/+22
track the current voltage level and avoid setting it if the requested voltage is already set. v2: check voltage type before checking current voltage Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms/pm: Disable voltage adjust on RS780/RS880Alex Deucher1-4/+1
The vddc value in the power tables is not an actual voltage like on discrete r6xx/r7xx/evergreen systems, but instead has a symbolic meaning (e.g., NONE, LOW, HIGH, etc.). See atombios.h Most RS780/RS880 vbioses don't have a SetVoltage table anyway, so it shouldn't be doing anything to the hardware at the moment. I need to figure out how voltage is supposed to work on the newer IGPs; until then, disable it. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms: fix typo in printing the HPD infoAlex Deucher1-2/+1
I forgot to fix this in 8e36ed00842668a39a6ed1b0a00b8ac92b7c4cd5 Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms/pm: add mid profileAlex Deucher5-13/+126
This adds an additional profile, mid, to the pm profile code which takes the place of the old low profile. The default behavior remains the same, e.g., auto profile now selects between mid and high profiles based on power source, however, you can now manually force the low profile which was previously only available as a dpms off state. Enabling the low profile when the displays are on has been known to cause display corruption in some cases. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms/pm: Misc fixesAlex Deucher1-16/+10
- don't rest the power state in pm_init() We already boot up to the default power state. Note this patch relies on: drm/radeon/kms/pm: patch default power state with default clocks/voltages on r6xx+ To make sure the default power state matches the boot up state. - In the pm resume path asic init will have set the power state back to the default so reset the tracking state values. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms/combios: fix typo in voltage fixAlex Deucher1-1/+1
Noticed by Rafał Miłecki. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon/kms/evergreen: set accel_enabledAlex Deucher4-3/+12
This is needed to enable accel in the ddx. However, due to a bug in older versions of the ddx, it relies on accel being disabled in order to load properly on evergreen chips. To maintain compatility, we add a new get accel param and call that from the ddx. The old one always returns false for evergreen cards. [this fixes a regression with older userspaces on newer kernels]. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/vmwgfx: return -EFAULT for copy_to_user errorsDan Carpenter2-2/+7
copy_to/from_user() returns the number of bytes remaining to be copied but we want to return a negative error code here. This gets returned to userspace. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/drm_crtc: return -EFAULT on copy_to_user errorsDan Carpenter1-1/+3
copy_from_user() returns the number of bytes left to be copied but we want to return a negative error code here. This is in the ioctl handler so the error code get returned to userspace. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/fb: use printk to print out the switching to text mode error.Dave Airlie1-1/+1
using DRM_ERROR, results in people blaming the drm code for the oops, and not looking at the oops. (sadly yes I've gotten reports). Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/radeon: fix PM on non-vram cards.Dave Airlie1-9/+0
PM attemps to unmap objects that aren't actually mapped into userspace ever, so just don't bother unmapping them at this point, since all you are doing is nothing. We should be making sure all access to these objects are locked in kernel space instead. In theory the VRAM gart table is already done, and both the shaders and stolen vga memory blocks are never accessed at runtime. fixes: https://bugzilla.kernel.org/show_bug.cgi?id=16127 Reported-by: Jure Repnic <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm: Propagate error from drm_fb_helper_init().Chris Wilson4-11/+38
The previous commit fixes the problem, these commits make sure we actually fail properly if it happens again. I've squashed the commits from Chris since they are all fixing one issue. Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-08drm/i915: fix oops on single crtc devices.Dave Airlie3-6/+6
(regression fix since fbdev/kms rework). My fb rework didn't remember about the 84/65s. Reported-by: Ondrej Zary <[email protected]> Tested-by: Ondrej Zary <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-06-07msm: dma: add completion.h headerDaniel Walker1-0/+1
At some point this was exposed (not sure how), linux-2.6/arch/arm/mach-msm/dma.c:92: error: field 'complete' has incomplete type linux-2.6/arch/arm/mach-msm/dma.c: In function 'dmov_exec_cmdptr_complete_func': linux-2.6/arch/arm/mach-msm/dma.c:108: error: implicit declaration of function 'complete' linux-2.6/arch/arm/mach-msm/dma.c: In function 'msm_dmov_exec_cmd': linux-2.6/arch/arm/mach-msm/dma.c:120: error: implicit declaration of function 'init_completion' linux-2.6/arch/arm/mach-msm/dma.c:123: error: implicit declaration of function 'wait_for_completion' and the fix is just to add the header. Signed-off-by: Daniel Walker <[email protected]>
2010-06-08PM / x86: Save/restore MISC_ENABLE registerOndrej Zary3-0/+8
Save/restore MISC_ENABLE register on suspend/resume. This fixes OOPS (invalid opcode) on resume from STR on Asus P4P800-VM, which wakes up with MWAIT disabled. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15385 Signed-off-by: Ondrej Zary <[email protected]> Tested-by: Alan Stern <[email protected]> Acked-by: H. Peter Anvin <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2010-06-07ahci: redo stopping DMA engines on empty portsTejun Heo1-18/+3
Commit 96d60303fd (ahci: Turn off DMA engines when there's no device) implemented stopping DMA engines on empty ports but it used single sampling of status registers to determine device presence which led to disabling of DMA engines on occupied ports. Do it after all EH actions are complete using device presence state determined by EH. This avoids spurious disabling of DMA engines and simplifies the code. Signed-off-by: Tejun Heo <[email protected]> Tested-by: Marc Dionne <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Robert Hancock <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-06-07sata_sil24: fix kernel panic on ARM caused by unaligned access in sata_sil24Colin Tuckley1-6/+6
The sata_sil24 driver has six 16-bit registers that are initialised with 32-bit writes. This cause a kernel panic on ARM due to the unaligned accesses which result. This patch changes the accesses to the correct 16-bit ones. Signed-off-by: Colin Tuckley <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-06-07ahci: add pci quirk for JMB362Tejun Heo2-1/+5
JMB362 is a new variant of jmicron controller which is similar to JMB360 but has two SATA ports instead of one. As there is no PATA port, single function AHCI mode can be used as in JMB360. Add pci quirk for JMB362. Signed-off-by: Tejun Heo <[email protected]> Reported-by: Aries Lee <[email protected]> Cc: [email protected] Signed-off-by: Jeff Garzik <[email protected]>
2010-06-07sata_via: explain the magic fixTejun Heo1-2/+16
Add Joseph Chan's explanation of the problem and workaround to the VT6421 magic fix. Signed-off-by: Tejun Heo <[email protected]> Cc: Joseph Chan <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2010-06-07mac80211: fix function pointer checkHolger Schurig1-1/+1
This makes "iw wlan0 dump survey" work again with mac80211-based drivers that support it, e.g. ath5k. Signed-off-by: Holger Schurig <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-06-07wireless: remove my name from the maintainer listZhu Yi1-4/+0
Remove my name from the MAINTAINERS file. Signed-off-by: Zhu Yi <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-06-07ath5k: fix NULL pointer in antenna configurationBruno Randolf1-0/+7
If the channel is not set yet and we configure the antennas just store the setting. It will be activated during the next reset, when the channel is set. Signed-off-by: Bruno Randolf <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-06-07p54usb: Add device ID for Dell WLA3310 USBJason Dravet1-0/+1
Add Dell WLA3310 USB wireless card, which has a Z-Com XG-705A chipset, to the USB Ids in p54usb. Signed-off-by: Jason Dravet <[email protected]> Tested-by: Richard Gregory Tillmore <[email protected]> Signed-off-by: Larry Finger <[email protected]> Acked-by: Christian Lamparter <[email protected]> Cc: <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-06-07wl1251: fix a memory leak in probeGrazvydas Ignotas1-0/+1
wl1251_sdio_probe() error path is missing wl1251_free_hw, add it. Signed-off-by: Grazvydas Ignotas <[email protected]> Acked-by: Kalle Valo <[email protected]> Cc: [email protected] Signed-off-by: John W. Linville <[email protected]>
2010-06-07pcmcia: avoid validate_cis failure on CIS overrideDominik Brodowski1-0/+1
Commit a8408c17 introduced a new check to pccard_validate_cis(), which avoids any "late" calls to this function. This broke the insertion of cards which require a CIS override which changes the number of card functions. Fix this by asserting that this is _not_ a late call, but a proper call early during the card insertion process. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=16138 Reported-by: Mikulas Patocka <[email protected]> CC: <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-06-07pcmcia: dev_node removal bugfixDominik Brodowski1-0/+1
Patch c7c2fa07 removed one line too much from smc91c92_cs.c. Reported-by: Komuro <[email protected]> CC: [email protected] CC: [email protected] Signed-off-by: Dominik Brodowski <[email protected]>
2010-06-07pcmcia: yenta_socket.c Remove extra #ifdef CONFIG_YENTA_TIJustin P. Mattock1-8/+6
Seems pointless to have two #ifdef's with the same CONFIG_YENTA_TI. Remove the extra one and move CARDBUS_TYPE_ENE with the others. [[email protected]: spelling & whitespace fixes] Signed-off-by: Justin P. Mattock <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-06-07pcmcia: only keep saved I365_CSCINT flag if there is no PCI irqDominik Brodowski1-2/+3
Keeping the saved I365_CSCINT flag around breaks PCMCIA on some system, and is only needed on a few systems to get PCMCIA to work. This patch allows PCMCIA to work on both types, and it fixes https://bugzilla.kernel.org/show_bug.cgi?id=16015 Reported-by: Justin P. Mattock <[email protected]> CC: <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-06-07[PATCH 2/11] drivers/watchdog: Eliminate a NULL pointer dereferenceJulia Lawall1-1/+1
At the point of the call to dev_err, wm8350 is NULL. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E,E1; identifier f; statement S1,S2,S3; @@ if ((E == NULL && ...) || ...) { ... when != if (...) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // </smpl> Signed-off-by: Julia Lawall <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2010-06-07ipmr: dont corrupt listsEric Dumazet2-2/+6
ipmr_rules_exit() and ip6mr_rules_exit() free a list of items, but forget to properly remove these items from list. List head is not changed and still points to freed memory. This can trigger a fault later when icmpv6_sk_exit() is called. Fix is to either reinit list, or use list_del() to properly remove items from list before freeing them. bugzilla report : https://bugzilla.kernel.org/show_bug.cgi?id=16120 Introduced by commit d1db275dd3f6e4 (ipv6: ip6mr: support multiple tables) and commit f0ad0860d01e (ipv4: ipmr: support multiple tables) Reported-by: Alex Zhavnerchik <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> CC: Patrick McHardy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-07powerpc/oprofile: fix potential buffer overrun in op_model_cell.cDenis Kirjanov1-1/+1
Fix potential initial_lfsr buffer overrun. Writing past the end of the buffer could happen when index == ENTRIES Signed-off-by: Denis Kirjanov <[email protected]> Cc: [email protected] Signed-off-by: Robert Richter <[email protected]>
2010-06-078139too: fix buffer overrun in rtl8139_init_boardDenis Kirjanov1-0/+1
Fix rtl_chip_info buffer overrun when we can't identify the chip. (i = ARRAY_SIZE (rtl_chip_info) in this case) Signed-off-by: Denis Kirjanov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-07asix: check packet size against mtu+ETH_HLEN instead of ETH_FRAME_LENJussi Kivilinna1-1/+1
Driver checks received packet is too large in asix_rx_fixup() and fails if it is. Problem is that MTU might be set larger than 1500 and asix fails to work correctly with VLAN tagged packets. The check should be 'dev->net->mtu + ETH_HLEN' instead. Tested with AX88772. Signed-off-by: Jussi Kivilinna <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-06Revert "tty: fix a little bug in scrup, vt.c"Linus Torvalds1-1/+1
This reverts commit 962400e8fd29981a7b166e463dd143b6ac6a3e76, which was entirely bogus. The code used to multiply the character offset by "vc->vc_cols", and that's actually correct, because 'd' itself is an 'unsigned short'. So the pointer arithmetic already takes the size of a VGA character into account. Changing it to use vc_size_row (which is just "vc_cols" shifted up to take the size of the character into account) ends up multiplying with the VGA character size twice. This got reported as bugs for various other subsystems, because what it actually results in is writing the 16-bit vc_video_erase_char pattern (usually 0x0720: 0x07 is the default attribute, 0x20 is ASCII space) into some random other allocation. So Markus ended up reporting this as a ext4 bug, while to Torsten Kaiser it looked like a problem with KMS or libata. Jeff Chua saw it in different places. And finally - Justin Mattock had slab poisoning enabled, and saw it as a slab poison overwritten. And bisected and reverted this to verify the buggy commit. Reported-by: Markus Trippelsdorf <[email protected]> Reported-by: Torsten Kaiser <[email protected]> Reported-by: Jeff Chua <[email protected]> Reported-by: Justin P. Mattock <[email protected]> Reported-bisected-and-tested-by: Justin P. Mattock <[email protected]> Acked-by: Dave Airlie <[email protected]> Cc: Frank Pan <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-06-06r8169: fix random mdio_write failuresTimo Teräs1-0/+5
Some configurations need delay between the "write completed" indication and new write to work reliably. Realtek driver seems to use longer delay when polling the "write complete" bit, so it waits long enough between writes with high probability (but could probably break too). This patch adds a new udelay to make sure we wait unconditionally some time after the write complete indication. This caused a regression with XID 18000000 boards when the board specific phy configuration writing many mdio registers was added in commit 2e955856ff (r8169: phy init for the 8169scd). Some of the configration mdio writes would almost always fail, and depending on failure might leave the PHY in non-working state. Signed-off-by: Timo Teräs <[email protected]> Acked-off-by: Francois Romieu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-06ip6mr: fix a typo in ip6mr_for_each_table()Eric Dumazet1-1/+1
Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-06-06jffs2: update ctime when changing the file's permission by setfaclJan Kara1-1/+2
jffs2 didn't update the ctime of the file when its permission was changed. Steps to reproduce: # touch aaa # stat -c %Z aaa 1275289822 # setfacl -m 'u::x,g::x,o::x' aaa # stat -c %Z aaa 1275289822 <- unchanged But, according to the spec of the ctime, jffs2 must update it. Port of ext3 patch by Miao Xie <[email protected]>. Signed-off-by: Jan Kara <[email protected]> Signed-off-by: David Woodhouse <[email protected]>
2010-06-05iwlwifi: move sysfs_create_group to post request firmwareEmmanuel Grumbach1-159/+159
Move the sysfs_create_group to iwl_ucode_callback after we have safely got the firmware. The motivation to do this comes from a warning from lockdep which detected that we request priv->mutex while holding s_active during a sysfs request (show_statistics in the example copy pasted). The reverse order exists upon request_firmware: request_firmware which is a sysfs operation that requires s_active is run under priv->mutex. This ensures that we don't get sysfs request before we finish to request the firmware, avoiding this deadlock. ======================================================= [ INFO: possible circular locking dependency detected ] ------------------------------------------------------- cat/2595 is trying to acquire lock: (&priv->mutex){+.+.+.}, at: [<facfa598>] show_statistics+0x48/0x100 [iwlagn] but task is already holding lock: (s_active){++++.+}, at: [<c0580ebd>] sysfs_get_active_two+0x1d/0x50 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (s_active){++++.+}: [<c0489b74>] __lock_acquire+0xc44/0x1230 [<c048a1ed>] lock_acquire+0x8d/0x110 [<c0581499>] sysfs_addrm_finish+0xe9/0x180 [<c057f64a>] sysfs_hash_and_remove+0x4a/0x80 [<c05829d4>] sysfs_remove_group+0x44/0xd0 [<c0714b75>] dpm_sysfs_remove+0x15/0x20 [<c070dac8>] device_del+0x38/0x170 [<c070dc1e>] device_unregister+0x1e/0x60 [<c071838d>] _request_firmware+0x29d/0x550 [<c07186c7>] request_firmware+0x17/0x20 [<fad01bf1>] iwl_mac_start+0xb1/0x1230 [iwlagn] [<fa46ba06>] ieee80211_open+0x436/0x6f0 [mac80211] [<c0808cd2>] dev_open+0x92/0xf0 [<c0808b2b>] dev_change_flags+0x7b/0x190 [<c08148e8>] do_setlink+0x178/0x3b0 [<c0815169>] rtnl_setlink+0xf9/0x130 [<c081453b>] rtnetlink_rcv_msg+0x1bb/0x1f0 [<c0827ce6>] netlink_rcv_skb+0x86/0xa0 [<c081436c>] rtnetlink_rcv+0x1c/0x30 [<c08279c3>] netlink_unicast+0x263/0x290 [<c0828768>] netlink_sendmsg+0x1c8/0x2a0 [<c07f85fd>] sock_sendmsg+0xcd/0x100 [<c07f964d>] sys_sendmsg+0x15d/0x290 [<c07f9e6b>] sys_socketcall+0xeb/0x2a0 [<c040ad9f>] sysenter_do_call+0x12/0x38 -> #0 (&priv->mutex){+.+.+.}: [<c0489f84>] __lock_acquire+0x1054/0x1230 [<c048a1ed>] lock_acquire+0x8d/0x110 [<c08bb358>] __mutex_lock_common+0x58/0x470 [<c08bb84a>] mutex_lock_nested+0x3a/0x50 [<facfa598>] show_statistics+0x48/0x100 [iwlagn] [<c070d219>] dev_attr_show+0x29/0x50 [<c057fecd>] sysfs_read_file+0xdd/0x190 [<c052880f>] vfs_read+0x9f/0x190 [<c0528d22>] sys_read+0x42/0x70 [<c040ad9f>] sysenter_do_call+0x12/0x38 other info that might help us debug this: 3 locks held by cat/2595: #0: (&buffer->mutex){+.+.+.}, at: [<c057fe25>] sysfs_read_file+0x35/0x190 #1: (s_active){++++.+}, at: [<c0580ecd>] sysfs_get_active_two+0x2d/0x50 #2: (s_active){++++.+}, at: [<c0580ebd>] sysfs_get_active_two+0x1d/0x50 stack backtrace: Pid: 2595, comm: cat Not tainted 2.6.33-tp-rc4 #2 Call Trace: [<c08b99ab>] ? printk+0x1d/0x22 [<c0487752>] print_circular_bug+0xc2/0xd0 [<c0489f84>] __lock_acquire+0x1054/0x1230 [<c0478d81>] ? sched_clock_cpu+0x121/0x180 [<c048a1ed>] lock_acquire+0x8d/0x110 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<c08bb358>] __mutex_lock_common+0x58/0x470 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<c08bb84a>] mutex_lock_nested+0x3a/0x50 [<facfa598>] ? show_statistics+0x48/0x100 [iwlagn] [<facfa598>] show_statistics+0x48/0x100 [iwlagn] [<c0580cf9>] ? sysfs_get_active+0x69/0xb0 [<facfa550>] ? show_statistics+0x0/0x100 [iwlagn] [<c070d219>] dev_attr_show+0x29/0x50 [<c057fecd>] sysfs_read_file+0xdd/0x190 [<c05ff314>] ? security_file_permission+0x14/0x20 [<c0528242>] ? rw_verify_area+0x62/0xd0 [<c052880f>] vfs_read+0x9f/0x190 [<c047745b>] ? up_read+0x1b/0x30 [<c057fdf0>] ? sysfs_read_file+0x0/0x190 [<c04af3b4>] ? audit_syscall_entry+0x1f4/0x220 [<c0528d22>] sys_read+0x42/0x70 [<c040ad9f>] sysenter_do_call+0x12/0x38 Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Reinette Chatre <[email protected]>
2010-06-05iwlwifi: add name to Maintainers listWey-Yi Guy1-0/+1
Add "Wey-Yi Guy" to maintainers list for iwlwifi. Signed-off-by: Wey-Yi Guy <[email protected]> Signed-off-by: Reinette Chatre <[email protected]>
2010-06-05iwl3945: fix internal scanAbhijeet Kolekar4-31/+96
Port of internal scan to iwl3945 missed introduction of iwl3945_get_single_channel_for_scan. Fix the following bug by introducing the iwl3945_get_single_channel_for_scan http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2208 Signed-off-by: Abhijeet Kolekar <[email protected]> Signed-off-by: Reinette Chatre <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.