| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
|
|
Kuniyuki Iwashima says:
====================
dccp/tcp: Relocate security_inet_conn_request().
security_inet_conn_request() reads reqsk's remote address, but it's not
initialised in some places.
Let's make sure the address is set before security_inet_conn_request().
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Initially, commit 4237c75c0a35 ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated. The hook is added just after the allocation,
so reqsk's IPv6 remote address was not initialised then.
However, SELinux/Smack started to read it in netlbl_req_setattr()
after commit e1adea927080 ("calipso: Allow request sockets to be
relabelled by the lsm.").
Commit 284904aa7946 ("lsm: Relocate the IPv4 security_inet_conn_request()
hooks") fixed that kind of issue only in TCPv4 because IPv6 labeling was
not supported at that time. Finally, the same issue was introduced again
in IPv6.
Let's apply the same fix on DCCPv6 and TCPv6.
Fixes: e1adea927080 ("calipso: Allow request sockets to be relabelled by the lsm.")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Initially, commit 4237c75c0a35 ("[MLSXFRM]: Auto-labeling of child
sockets") introduced security_inet_conn_request() in some functions
where reqsk is allocated. The hook is added just after the allocation,
so reqsk's IPv4 remote address was not initialised then.
However, SELinux/Smack started to read it in netlbl_req_setattr()
after the cited commits.
This bug was partially fixed by commit 284904aa7946 ("lsm: Relocate
the IPv4 security_inet_conn_request() hooks").
This patch fixes the last bug in DCCPv4.
Fixes: 389fb800ac8b ("netlabel: Label incoming TCP connections correctly in SELinux")
Fixes: 07feee8f812f ("netlabel: Cleanup the Smack/NetLabel code to fix incoming TCP connections")
Signed-off-by: Kuniyuki Iwashima <[email protected]>
Acked-by: Paul Moore <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Since commit 833bac7ec392 ("net/smc: Fix setsockopt and sysctl to
specify same buffer size again") the SMC protocol uses its own
default values for the smc.rmem and smc.wmem sysctl variables
which are no longer derived from the TCP IPv4 buffer sizes.
Fixup the kernel documentation to reflect this change, too.
Fixes: 833bac7ec392 ("net/smc: Fix setsockopt and sysctl to specify same buffer size again")
Signed-off-by: Gerd Bayer <[email protected]>
Reviewed-by: Wenjia Zhang <[email protected]>
Reviewed-by: Dust Li <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When ptr_ring_init() returns failure in page_pool_init(), free_percpu()
is not called to free pool->recycle_stats, which may cause memory
leak.
Fixes: ad6fa1e1ab1b ("page_pool: Add recycle stats")
Signed-off-by: Jian Shen <[email protected]>
Signed-off-by: Jijie Shao <[email protected]>
Reviewed-by: Yunsheng Lin <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Somnath Kotur <[email protected]>
Reviewed-by: Ilias Apalodimas <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
This function takes a pointer to a pointer, unlike sprintf() which is
passed a plain pointer. Fix up the documentation to make this clear.
Fixes: 7888fe53b706 ("ethtool: Add common function for filling out strings")
Cc: Alexander Duyck <[email protected]>
Cc: Justin Stitt <[email protected]>
Cc: [email protected]
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Justin Stitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When LAN9303 is MDIO-connected two callchains exist into
mdio->bus->write():
1. switch ports 1&2 ("physical" PHYs):
virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})->
lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested
2. LAN9303 virtual PHY:
virtual MDIO bus (lan9303_phy_{read|write}) ->
lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write}
If the latter functions just take
mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP
false-positive splat. It's false-positive because the first
mdio_lock in the second callchain above belongs to virtual MDIO bus, the
second mdio_lock belongs to physical MDIO bus.
Consequent annotation in lan9303_mdio_{read|write} as nested lock
(similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus)
prevents the following splat:
WARNING: possible circular locking dependency detected
5.15.71 #1 Not tainted
------------------------------------------------------
kworker/u4:3/609 is trying to acquire lock:
ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex
but task is already holding lock:
ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&bus->mdio_lock){+.+.}-{3:3}:
lock_acquire
__mutex_lock
mutex_lock_nested
lan9303_mdio_read
_regmap_read
regmap_read
lan9303_probe
lan9303_mdio_probe
mdio_probe
really_probe
__driver_probe_device
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork
-> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}:
__lock_acquire
lock_acquire.part.0
lock_acquire
__mutex_lock
mutex_lock_nested
regmap_lock_mutex
regmap_read
lan9303_phy_read
dsa_slave_phy_read
__mdiobus_read
mdiobus_read
get_phy_device
mdiobus_scan
__mdiobus_register
dsa_register_switch
lan9303_probe
lan9303_mdio_probe
mdio_probe
really_probe
__driver_probe_device
driver_probe_device
__device_attach_driver
bus_for_each_drv
__device_attach
device_initial_probe
bus_probe_device
deferred_probe_work_func
process_one_work
worker_thread
kthread
ret_from_fork
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&bus->mdio_lock);
lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock);
lock(&bus->mdio_lock);
lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock);
*** DEADLOCK ***
5 locks held by kworker/u4:3/609:
#0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work
#1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work
#2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach
#3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch
#4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read
stack backtrace:
CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1
Workqueue: events_unbound deferred_probe_work_func
Call trace:
dump_backtrace
show_stack
dump_stack_lvl
dump_stack
print_circular_bug
check_noncircular
__lock_acquire
lock_acquire.part.0
lock_acquire
__mutex_lock
mutex_lock_nested
regmap_lock_mutex
regmap_read
lan9303_phy_read
dsa_slave_phy_read
__mdiobus_read
mdiobus_read
get_phy_device
mdiobus_scan
__mdiobus_register
dsa_register_switch
lan9303_probe
lan9303_mdio_probe
...
Cc: [email protected]
Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support")
Signed-off-by: Alexander Sverdlin <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Error code strings are not getting printed properly
due to holes. Print error code as well.
Fixes: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]")
Signed-off-by: Ratheesh Kannoth <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Some of error codes were wrong. Fix the same.
Fixes: 51afe9026d0c ("octeontx2-pf: NIX TX overwrites SQ_CTX_HW_S[SQ_INT]")
Signed-off-by: Ratheesh Kannoth <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Use __generic_cmpxchg_local() for arch_cmpxchg_local() implementation
on SH architecture because it does not implement arch_cmpxchg_local().
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: John Paul Adrian Glaubitz <[email protected]>
Link: https://lore.kernel.org/r/169824660459.24340.14614817132696360531.stgit@devnote2
Signed-off-by: John Paul Adrian Glaubitz <[email protected]>
|
|
I am looking at syzbot reports triggering kernel stack overflows
involving a cascade of ipvlan devices.
We can save 8 bytes in struct flowi_common.
This patch alone will not fix the issue, but is a start.
Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: wenxu <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"The only thing worth highligthing is that gzip moves to use vmalloc()
instead of kmalloc just as we had a fix for this for zstd on v6.6-rc1.
The rest is regular house keeping, keeping things neat, tidy, and
boring"
[ The kmalloc -> vmalloc conversion is not the right approach.
Unless you know you need huge areas or know you need to use virtual
mappings for some reason (playing with protection bits or whatever),
you should use kvmalloc()/kvfree, which automatically picks the right
allocation model - Linus ]
* tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Annotate struct module_notes_attrs with __counted_by
module: Fix comment typo
module: Make is_valid_name() return bool
module: Make is_mapping_symbol() return bool
module/decompress: use vmalloc() for gzip decompression workspace
MAINTAINERS: add include/linux/module*.h to modules
module: Clarify documentation of module_param_call()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
Shung-Hsi Yu says:
====================
bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
Changes since v1:
- add test for negation and bswap (Alexei, Eduard)
- add test for BPF_TO_LE as well to cover all types of BPF_END opcode
- remove vals map and trigger backtracking with jump instead, based of
Eduard's code
- v1 at https://lore.kernel.org/bpf/[email protected]
This patchset fixes and adds selftest for the issue reported by Mohamed
Mahmoud and Toke Høiland-Jørgensen where the kernel can run into a
verifier bug during backtracking of BPF_ALU | BPF_TO_BE | BPF_END
instruction[0]. As seen in the verifier log below, r0 was incorrectly
marked as precise even tough its value was not being used.
Patch 1 fixes the issue based on Andrii's analysis, and patch 2 adds a
selftest for such case using inline assembly. Please see individual
patch for detail.
...
mark_precise: frame2: regs=r2 stack= before 1891: (77) r2 >>= 56
mark_precise: frame2: regs=r2 stack= before 1890: (dc) r2 = be64 r2
mark_precise: frame2: regs=r0,r2 stack= before 1889: (73) *(u8 *)(r1 +47) = r3
...
mark_precise: frame2: regs=r0 stack= before 212: (85) call pc+1617
BUG regs 1
processed 5112 insns (limit 1000000) max_states_per_insn 4 total_states 92 peak_states 90 mark_read 20
0: https://lore.kernel.org/r/[email protected]
Shung-Hsi Yu (2):
bpf: Fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
selftests/bpf: precision tracking test for BPF_NEG and BPF_END
kernel/bpf/verifier.c | 7 +-
.../selftests/bpf/prog_tests/verifier.c | 2 +
.../selftests/bpf/progs/verifier_precision.c | 93 +++++++++++++++++++
3 files changed, 101 insertions(+), 1 deletion(-)
create mode 100644 tools/testing/selftests/bpf/progs/verifier_precision.c
base-commit: c17cda15cc86e65e9725641daddcd7a63cc9ad01
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
As seen from previous commit that fix backtracking for BPF_ALU | BPF_TO_BE
| BPF_END, both BPF_NEG and BPF_END require special handling. Add tests
written with inline assembly to check that the verifier does not incorrecly
use the src_reg field of BPF_NEG and BPF_END (including bswap added in v4).
Suggested-by: Eduard Zingerman <[email protected]>
Signed-off-by: Shung-Hsi Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
BPF_END and BPF_NEG has a different specification for the source bit in
the opcode compared to other ALU/ALU64 instructions, and is either
reserved or use to specify the byte swap endianness. In both cases the
source bit does not encode source operand location, and src_reg is a
reserved field.
backtrack_insn() currently does not differentiate BPF_END and BPF_NEG
from other ALU/ALU64 instructions, which leads to r0 being incorrectly
marked as precise when processing BPF_ALU | BPF_TO_BE | BPF_END
instructions. This commit teaches backtrack_insn() to correctly mark
precision for such case.
While precise tracking of BPF_NEG and other BPF_END instructions are
correct and does not need fixing, this commit opt to process all BPF_NEG
and BPF_END instructions within the same if-clause to better align with
current convention used in the verifier (e.g. check_alu_op).
Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking")
Cc: [email protected]
Reported-by: Mohamed Mahmoud <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]
Tested-by: Toke Høiland-Jørgensen <[email protected]>
Tested-by: Tao Lyu <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Signed-off-by: Shung-Hsi Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Chuyi Zhou says:
====================
Relax allowlist for open-coded css_task iter
Hi,
The patchset aims to relax the allowlist for open-coded css_task iter
suggested by Alexei[1].
Please see individual patches for more details. And comments are always
welcome.
Patch summary:
* Patch #1: Relax the allowlist and let css_task iter can be used in
bpf iters and any sleepable progs.
* Patch #2: Add a test in cgroup_iters.c which demonstrates how
css_task iters can be combined with cgroup iter.
* Patch #3: Add a test to prove css_task iter can be used in normal
* sleepable progs.
link[1]:https://lore.kernel.org/lkml/CAADnVQKafk_junRyE=-FVAik4hjTRDtThymYGEL8hGTuYoOGpA@mail.gmail.com/
---
Changes in v2:
* Fix the incorrect logic in check_css_task_iter_allowlist. Use
expected_attach_type to check whether we are using bpf_iters.
* Link to v1:https://lore.kernel.org/bpf/[email protected]/T/#m946f9cde86b44a13265d9a44c5738a711eb578fd
Changes in v3:
* Add a testcase to prove css_task can be used in fentry.s
* Link to v2:https://lore.kernel.org/bpf/[email protected]/T/#m14a97041ff56c2df21bc0149449abd275b73f6a3
Changes in v4:
* Add Yonghong's ack for patch #1 and patch #2.
* Solve Yonghong's comments for patch #2
* Move prog 'iter_css_task_for_each_sleep' from iters_task_failure.c to
iters_css_task.c. Use RUN_TESTS to prove we can load this prog.
* Link to v3:https://lore.kernel.org/bpf/[email protected]/T/#m3200d8ad29af4ffab97588e297361d0a45d7585d
---
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This Patch add a test to prove css_task iter can be used in normal
sleepable progs.
Signed-off-by: Chuyi Zhou <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
This patch adds a test which demonstrates how css_task iter can be combined
with cgroup iter and it won't cause deadlock, though cgroup iter is not
sleepable.
Signed-off-by: Chuyi Zhou <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The newly added open-coded css_task iter would try to hold the global
css_set_lock in bpf_iter_css_task_new, so the bpf side has to be careful in
where it allows to use this iter. The mainly concern is dead locking on
css_set_lock. check_css_task_iter_allowlist() in verifier enforced css_task
can only be used in bpf_lsm hooks and sleepable bpf_iter.
This patch relax the allowlist for css_task iter. Any lsm and any iter
(even non-sleepable) and any sleepable are safe since they would not hold
the css_set_lock before entering BPF progs context.
This patch also fixes the misused BPF_TRACE_ITER in
check_css_task_iter_allowlist which compared bpf_prog_type with
bpf_attach_type.
Fixes: 9c66dc94b62ae ("bpf: Introduce css_task open-coded iterator kfuncs")
Signed-off-by: Chuyi Zhou <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Use LIBBPF_OPTS() macro to properly initialize bpf_map_create_opts in
test_maps' tests.
Signed-off-by: Andrii Nakryiko <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
When there are concurrent uref release and bpf timer init operations,
the following sequence diagram is possible. It will break the guarantee
provided by bpf_timer: bpf_timer will still be alive after userspace
application releases or unpins the map. It also will lead to kmemleak
for old kernel version which doesn't release bpf_timer when map is
released.
bpf program X:
bpf_timer_init()
lock timer->lock
read timer->timer as NULL
read map->usercnt != 0
process Y:
close(map_fd)
// put last uref
bpf_map_put_uref()
atomic_dec_and_test(map->usercnt)
array_map_free_timers()
bpf_timer_cancel_and_free()
// just return
read timer->timer is NULL
t = bpf_map_kmalloc_node()
timer->timer = t
unlock timer->lock
Fix the problem by checking map->usercnt after timer->timer is assigned,
so when there are concurrent uref release and bpf timer init, either
bpf_timer_cancel_and_free() from uref release reads a no-NULL timer
or the newly-added atomic64_read() returns a zero usercnt.
Because atomic_dec_and_test(map->usercnt) and READ_ONCE(timer->timer)
in bpf_timer_cancel_and_free() are not protected by a lock, so add
a memory barrier to guarantee the order between map->usercnt and
timer->timer. Also use WRITE_ONCE(timer->timer, x) to match the lockless
read of timer->timer in bpf_timer_cancel_and_free().
Reported-by: Hsin-Wei Hung <[email protected]>
Closes: https://lore.kernel.org/bpf/CABcoxUaT2k9hWsS1tNgXyoU3E-=PuOgMn737qK984fbFmfYixQ@mail.gmail.com
Fixes: b00628b1c7d5 ("bpf: Introduce bpf timers.")
Signed-off-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
IPQ95xx SoCs have different OPPs available for the CPU based on
the SoC variant. This can be determined from an eFuse register
present in the silicon.
Added support for ipq95xx on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Signed-off-by: Praveenkumar I <[email protected]>
Signed-off-by: Kathiravan T <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
[ Viresh: Fixed subject ]
Signed-off-by: Viresh Kumar <[email protected]>
|
|
IPQ53xx have different OPPs available for the CPU based on
SoC variant. This can be determined through use of an eFuse
register present in the silicon.
Added support for ipq53xx on nvmem driver which helps to
determine OPPs at runtime based on the eFuse register which
has the CPU frequency limits. opp-supported-hw dt binding
can be used to indicate the available OPPs for each limit.
nvmem driver also creates the "cpufreq-dt" platform_device after
passing the version matching data to the OPP framework so that the
cpufreq-dt handles the actual cpufreq implementation.
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Bryan O'Donoghue <[email protected]>
Signed-off-by: Kathiravan T <[email protected]>
Signed-off-by: Varadarajan Narayanan <[email protected]>
[ Viresh: Fixed subject ]
Signed-off-by: Viresh Kumar <[email protected]>
|
|
IPQ8074 comes in 3 families:
* IPQ8070A/IPQ8071A (Acorn) up to 1.4GHz
* IPQ8172/IPQ8173/IPQ8174 (Oak) up to 1.4GHz
* IPQ8072A/IPQ8074A/IPQ8076A/IPQ8078A (Hawkeye) up to 2.2GHz
So, in order to be able to share one OPP table lets add support for IPQ8074
family based of SMEM SoC ID-s as speedbin fuse is always 0 on IPQ8074.
IPQ8074 compatible is blacklisted from DT platdev as the cpufreq device
will get created by NVMEM CPUFreq driver.
Signed-off-by: Robert Marko <[email protected]>
Acked-by: Konrad Dybcio <[email protected]>
[ Viresh: Fixed rebase conflict. ]
Signed-off-by: Viresh Kumar <[email protected]>
|
|
Merge base changes for cpufreq support for IPQ8074.
|
|
Not all uses of __diag_ignore_all(...) in BPF-related code in order to
suppress warnings are wrapping kfunc definitions. Some "hook point"
definitions - small functions meant to be used as attach points for
fentry and similar BPF progs - need to suppress -Wmissing-declarations.
We could use __bpf_kfunc_{start,end}_defs added in the previous patch in
such cases, but this might be confusing to someone unfamiliar with BPF
internals. Instead, this patch adds __bpf_hook_{start,end} macros,
currently having the same effect as __bpf_kfunc_{start,end}_defs, then
uses them to suppress warnings for two hook points in the kernel itself
and some bpf_testmod hook points as well.
Signed-off-by: Dave Marchevsky <[email protected]>
Cc: Yafang Shao <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: Yafang Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
BPF kfuncs are meant to be called from BPF programs. Accordingly, most
kfuncs are not called from anywhere in the kernel, which the
-Wmissing-prototypes warning is unhappy about. We've peppered
__diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are
defined in the codebase to suppress this warning.
This patch adds two macros meant to bound one or many kfunc definitions.
All existing kfunc definitions which use these __diag calls to suppress
-Wmissing-prototypes are migrated to use the newly-introduced macros.
A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the
__bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier
version of this patch [0] and another recent mailing list thread [1].
In the future we might need to ignore different warnings or do other
kfunc-specific things. This change will make it easier to make such
modifications for all kfunc defs.
[0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/
[1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/
Signed-off-by: Dave Marchevsky <[email protected]>
Suggested-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Cc: Jiri Olsa <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Acked-by: David Vernet <[email protected]>
Acked-by: Yafang Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently this tests tries to umount /sys/kernel/debug (TDIR) but the
system it is running on may have mounts below.
For example, danobi/vmtest [0] VMs have
mount -t tracefs tracefs /sys/kernel/debug/tracing
as part of their init.
This change instead creates a "random" directory under /tmp and uses this
as TDIR.
If the directory already exists, ignore the error and keep moving on.
Test:
Originally:
$ vmtest -k $KERNEL_REPO/arch/x86_64/boot/bzImage "./test_progs -vv -a test_bpffs"
=> bzImage
===> Booting
===> Setting up VM
===> Running command
[ 2.138818] bpf_testmod: loading out-of-tree module taints kernel.
[ 2.140913] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_test_bpffs:PASS:clone 0 nsec
fn:PASS:unshare 0 nsec
fn:PASS:mount / 0 nsec
fn:FAIL:umount /sys/kernel/debug unexpected error: -1 (errno 16)
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_test_bpffs:PASS:clone 0 nsec
test_test_bpffs:PASS:waitpid 0 nsec
test_test_bpffs:FAIL:bpffs test failed 255#282 test_bpffs:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Successfully unloaded bpf_testmod.ko.
Command failed with exit code: 1
After this change:
$ vmtest -k $(make image_name) 'cd tools/testing/selftests/bpf && ./test_progs -vv -a test_bpffs'
=> bzImage
===> Booting
===> Setting up VM
===> Running command
[ 2.295696] bpf_testmod: loading out-of-tree module taints kernel.
[ 2.296468] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_test_bpffs:PASS:clone 0 nsec
fn:PASS:unshare 0 nsec
fn:PASS:mount / 0 nsec
fn:PASS:mount tmpfs 0 nsec
fn:PASS:mkdir /tmp/test_bpffs_testdir/fs1 0 nsec
fn:PASS:mkdir /tmp/test_bpffs_testdir/fs2 0 nsec
fn:PASS:mount bpffs /tmp/test_bpffs_testdir/fs1 0 nsec
fn:PASS:mount bpffs /tmp/test_bpffs_testdir/fs2 0 nsec
fn:PASS:reading /tmp/test_bpffs_testdir/fs1/maps.debug 0 nsec
fn:PASS:reading /tmp/test_bpffs_testdir/fs2/progs.debug 0 nsec
fn:PASS:creating /tmp/test_bpffs_testdir/fs1/a 0 nsec
fn:PASS:creating /tmp/test_bpffs_testdir/fs1/a/1 0 nsec
fn:PASS:creating /tmp/test_bpffs_testdir/fs1/b 0 nsec
fn:PASS:create_map(ARRAY) 0 nsec
fn:PASS:pin map 0 nsec
fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/a) 0 nsec
fn:PASS:renameat2(/fs1/a, /fs1/b, RENAME_EXCHANGE) 0 nsec
fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
fn:PASS:b should have a's inode 0 nsec
fn:PASS:access(/tmp/test_bpffs_testdir/fs1/b/1) 0 nsec
fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/map) 0 nsec
fn:PASS:renameat2(/fs1/c, /fs1/b, RENAME_EXCHANGE) 0 nsec
fn:PASS:stat(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
fn:PASS:b should have c's inode 0 nsec
fn:PASS:access(/tmp/test_bpffs_testdir/fs1/c/1) 0 nsec
fn:PASS:renameat2(RENAME_NOREPLACE) 0 nsec
fn:PASS:access(/tmp/test_bpffs_testdir/fs1/b) 0 nsec
bpf_testmod.ko is already unloaded.
Loading bpf_testmod.ko...
Successfully loaded bpf_testmod.ko.
test_test_bpffs:PASS:clone 0 nsec
test_test_bpffs:PASS:waitpid 0 nsec
test_test_bpffs:PASS:bpffs test 0 nsec
#282 test_bpffs:OK
Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED
Successfully unloaded bpf_testmod.ko.
[0] https://github.com/danobi/vmtest
This is a follow-up of https://lore.kernel.org/bpf/[email protected]/T/
v1 -> v2:
- use a TDIR name that is related to test
- use C-style comments
Signed-off-by: Manu Bretelle <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Hao Sun says:
====================
bpf: Fix incorrect immediate spill
Immediate is incorrectly cast to u32 before being spilled, losing sign
information. The range information is incorrect after load again. Fix
immediate spill by remove the cast. The second patch add a test case
for this.
Signed-off-by: Hao Sun <[email protected]>
---
Changes in v3:
- Change the expected log to fix the test case
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Add fix and cc tags.
- Link to v1: https://lore.kernel.org/r/[email protected]
---
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a test to check if the verifier correctly reason about the sign
of an immediate spilled to stack by BPF_ST instruction.
Signed-off-by: Hao Sun <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In check_stack_write_fixed_off(), imm value is cast to u32 before being
spilled to the stack. Therefore, the sign information is lost, and the
range information is incorrect when load from the stack again.
For the following prog:
0: r2 = r10
1: *(u64*)(r2 -40) = -44
2: r0 = *(u64*)(r2 - 40)
3: if r0 s<= 0xa goto +2
4: r0 = 1
5: exit
6: r0 = 0
7: exit
The verifier gives:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
1: (7a) *(u64 *)(r2 -40) = -44 ; R2_w=fp0 fp-40_w=4294967252
2: (79) r0 = *(u64 *)(r2 -40) ; R0_w=4294967252 R2_w=fp0
fp-40_w=4294967252
3: (c5) if r0 s< 0xa goto pc+2
mark_precise: frame0: last_idx 3 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r0 stack= before 2: (79) r0 = *(u64 *)(r2 -40)
3: R0_w=4294967252
4: (b7) r0 = 1 ; R0_w=1
5: (95) exit
verification time 7971 usec
stack depth 40
processed 6 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0
So remove the incorrect cast, since imm field is declared as s32, and
__mark_reg_known() takes u64, so imm would be correctly sign extended
by compiler.
Fixes: ecdf985d7615 ("bpf: track immediate values written to stack by BPF_ST instruction")
Cc: [email protected]
Signed-off-by: Hao Sun <[email protected]>
Acked-by: Shung-Hsi Yu <[email protected]>
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Fix two connection reaping bugs:
(1) rxrpc_connection_expiry is in units of seconds, so
rxrpc_disconnect_call() needs to multiply it by HZ when adding it to
jiffies.
(2) rxrpc_client_conn_reap_timeout() should set RXRPC_CLIENT_REAP_TIMER if
local->kill_all_client_conns is clear, not if it is set (in which case
we don't need the timer). Without this, old client connections don't
get cleaned up until the local endpoint is cleaned up.
Fixes: 5040011d073d ("rxrpc: Make the local endpoint hold a ref on a connected call")
Fixes: 0d6bf319bc5a ("rxrpc: Move the client conn cache management to the I/O thread")
Signed-off-by: David Howells <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Our MPTCP CI complained [1] -- and KBuild too -- that it was no longer
possible to build the kernel without CONFIG_CGROUPS:
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_new':
kernel/bpf/task_iter.c:919:14: error: 'CSS_TASK_ITER_PROCS' undeclared (first use in this function)
919 | case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
| ^~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c:919:14: note: each undeclared identifier is reported only once for each function it appears in
kernel/bpf/task_iter.c:919:36: error: 'CSS_TASK_ITER_THREADED' undeclared (first use in this function)
919 | case CSS_TASK_ITER_PROCS | CSS_TASK_ITER_THREADED:
| ^~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c:927:60: error: invalid application of 'sizeof' to incomplete type 'struct css_task_iter'
927 | kit->css_it = bpf_mem_alloc(&bpf_global_ma, sizeof(struct css_task_iter));
| ^~~~~~
kernel/bpf/task_iter.c:930:9: error: implicit declaration of function 'css_task_iter_start'; did you mean 'task_seq_start'? [-Werror=implicit-function-declaration]
930 | css_task_iter_start(css, flags, kit->css_it);
| ^~~~~~~~~~~~~~~~~~~
| task_seq_start
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_next':
kernel/bpf/task_iter.c:940:16: error: implicit declaration of function 'css_task_iter_next'; did you mean 'class_dev_iter_next'? [-Werror=implicit-function-declaration]
940 | return css_task_iter_next(kit->css_it);
| ^~~~~~~~~~~~~~~~~~
| class_dev_iter_next
kernel/bpf/task_iter.c:940:16: error: returning 'int' from a function with return type 'struct task_struct *' makes pointer from integer without a cast [-Werror=int-conversion]
940 | return css_task_iter_next(kit->css_it);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/bpf/task_iter.c: In function 'bpf_iter_css_task_destroy':
kernel/bpf/task_iter.c:949:9: error: implicit declaration of function 'css_task_iter_end' [-Werror=implicit-function-declaration]
949 | css_task_iter_end(kit->css_it);
| ^~~~~~~~~~~~~~~~~
This patch simply surrounds with a #ifdef the new code requiring CGroups
support. It seems enough for the compiler and this is similar to
bpf_iter_css_{new,next,destroy}() functions where no other #ifdef have
been added in kernel/bpf/helpers.c and in the selftests.
Fixes: 9c66dc94b62a ("bpf: Introduce css_task open-coded iterator kfuncs")
Link: https://github.com/multipath-tcp/mptcp_net-next/actions/runs/6665206927
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Matthieu Baerts <[email protected]>
[ added missing ifdefs for BTF_ID cgroup definitions ]
Signed-off-by: Jiri Olsa <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The "cpool_populated" variable is the number of elements in the cpool[]
array that have been populated. It is incremented in
tcp_sigpool_alloc_ahash() every time we populate a new element.
Unpopulated elements are NULL but if we have populated every element then
this code will read one element beyond the end of the array.
Fixes: 8c73b26315aa ("net/tcp: Prepare tcp_md5sig_pool for TCP-AO")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Dmitry Safonov <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
syzbot reported the following uninit-value access issue [1]:
=====================================================
BUG: KMSAN: uninit-value in strlen lib/string.c:418 [inline]
BUG: KMSAN: uninit-value in strstr+0xb8/0x2f0 lib/string.c:756
strlen lib/string.c:418 [inline]
strstr+0xb8/0x2f0 lib/string.c:756
tipc_nl_node_reset_link_stats+0x3ea/0xb50 net/tipc/node.c:2595
genl_family_rcv_msg_doit net/netlink/genetlink.c:971 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1051 [inline]
genl_rcv_msg+0x11ec/0x1290 net/netlink/genetlink.c:1066
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2545
genl_rcv+0x40/0x60 net/netlink/genetlink.c:1075
netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline]
netlink_unicast+0xf47/0x1250 net/netlink/af_netlink.c:1368
netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:559
__alloc_skb+0x318/0x740 net/core/skbuff.c:650
alloc_skb include/linux/skbuff.h:1286 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1214 [inline]
netlink_sendmsg+0xb34/0x13d0 net/netlink/af_netlink.c:1885
sock_sendmsg_nosec net/socket.c:730 [inline]
sock_sendmsg net/socket.c:753 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2541
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2595
__sys_sendmsg net/socket.c:2624 [inline]
__do_sys_sendmsg net/socket.c:2633 [inline]
__se_sys_sendmsg net/socket.c:2631 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
TIPC bearer-related names including link names must be null-terminated
strings. If a link name which is not null-terminated is passed through
netlink, strstr() and similar functions can cause buffer overrun. This
causes the above issue.
This patch changes the nla_policy for bearer-related names from NLA_STRING
to NLA_NUL_STRING. This resolves the issue by ensuring that only
null-terminated strings are accepted as bearer-related names.
syzbot reported similar uninit-value issue related to bearer names [2]. The
root cause of this issue is that a non-null-terminated bearer name was
passed. This patch also resolved this issue.
Fixes: 7be57fc69184 ("tipc: add link get/dump to new netlink api")
Fixes: 0655f6a8635b ("tipc: add bearer disable/enable to new netlink api")
Reported-and-tested-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=5138ca807af9d2b42574 [1]
Reported-and-tested-by: [email protected]
Closes: https://syzkaller.appspot.com/bug?extid=9425c47dccbcb4c17d51 [2]
Signed-off-by: Shigeru Yoshida <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The prp_fill_rct() function can fail. In that situation, it frees the
skb and returns NULL. Meanwhile on the success path, it returns the
original skb. So it's straight forward to fix bug by using the returned
value.
Fixes: 451d8123f897 ("net: prp: add packet handling support")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Paolo Abeni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
LLC reads the mac header with eth_hdr without verifying that the skb
has an Ethernet header.
Syzbot was able to enter llc_rcv on a tun device. Tun can insert
packets without mac len and with user configurable skb->protocol
(passing a tun_pi header when not configuring IFF_NO_PI).
BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline]
llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111
llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218
__netif_receive_skb_one_core net/core/dev.c:5523 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637
netif_receive_skb_internal net/core/dev.c:5723 [inline]
netif_receive_skb+0x58/0x660 net/core/dev.c:5782
tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555
tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002
Add a mac_len test before all three eth_hdr(skb) calls under net/llc.
There are further uses in include/net/llc_pdu.h. All these are
protected by a test skb->protocol == ETH_P_802_2. Which does not
protect against this tun scenario.
But the mac_len test added in this patch in llc_fixup_skb will
indirectly protect those too. That is called from llc_rcv before any
other LLC code.
It is tempting to just add a blanket mac_len check in llc_rcv, but
not sure whether that could break valid LLC paths that do not assume
an Ethernet header. 802.2 LLC may be used on top of non-802.3
protocols in principle. The below referenced commit shows that used
to, on top of Token Ring.
At least one of the three eth_hdr uses goes back to before the start
of git history. But the one that syzbot exercises is introduced in
this commit. That commit is old enough (2008), that effectively all
stable kernels should receive this.
Fixes: f83f1768f833 ("[LLC]: skb allocation size for responses")
Reported-by: [email protected]
Signed-off-by: Willem de Bruijn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
For some cargoculted reason on incomplete cleanup, we have a
PHY number which refers to nothing and gives confusing messages
about PHY 0 on all ports.
Print the name of the actual PHY device instead.
Reported-by: Howard Harte <[email protected]>
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
I often regenerate all YNL files in the tree to make sure they
are in sync with the codegen and specs. Generator rewrites
the files unconditionally, so since make looks at file modification
time to decide what to rebuild - my next build takes longer.
We already generate the code to a tempfile most of the time,
only overwrite the target when we have to.
Before:
$ stat include/uapi/linux/netdev.h
File: include/uapi/linux/netdev.h
Size: 2307 Blocks: 8 IO Block: 4096 regular file
Access: 2023-10-27 15:19:56.347071940 -0700
Modify: 2023-10-27 15:19:45.089000900 -0700
Change: 2023-10-27 15:19:45.089000900 -0700
Birth: 2023-10-27 15:19:45.088000894 -0700
$ ./tools/net/ynl/ynl-regen.sh -f
[...]
$ stat include/uapi/linux/netdev.h
File: include/uapi/linux/netdev.h
Size: 2307 Blocks: 8 IO Block: 4096 regular file
Access: 2023-10-27 15:19:56.347071940 -0700
Modify: 2023-10-27 15:22:18.417968446 -0700
Change: 2023-10-27 15:22:18.417968446 -0700
Birth: 2023-10-27 15:19:45.088000894 -0700
After:
$ stat include/uapi/linux/netdev.h
File: include/uapi/linux/netdev.h
Size: 2307 Blocks: 8 IO Block: 4096 regular file
Access: 2023-10-27 15:22:41.520114221 -0700
Modify: 2023-10-27 15:22:18.417968446 -0700
Change: 2023-10-27 15:22:18.417968446 -0700
Birth: 2023-10-27 15:19:45.088000894 -0700
$ ./tools/net/ynl/ynl-regen.sh -f
[...]
$ stat include/uapi/linux/netdev.h
File: include/uapi/linux/netdev.h
Size: 2307 Blocks: 8 IO Block: 4096 regular file
Access: 2023-10-27 15:22:41.520114221 -0700
Modify: 2023-10-27 15:22:18.417968446 -0700
Change: 2023-10-27 15:22:18.417968446 -0700
Birth: 2023-10-27 15:19:45.088000894 -0700
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Add two enum values that the blamed commit omitted.
Fixes: f2f9dd164db0 ("netlink: specs: devlink: add the remaining command to generate complete split_ops")
Signed-off-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Andrew Lunn says:
====================
Add missing MODULE_DESCRIPTIONS
Fixup PHY and MDIO drivers which are missing MODULE_DESCRIPTION.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
W=1 builds now warn if a module is built without a
MODULE_DESCRIPTION(). Fill them in based on the Kconfig text, or
similar.
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Andrew Jeffery <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
W=1 builds now warn if a module is built without a
MODULE_DESCRIPTION(). Fill them in based on the Kconfig text, or
similar.
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Acked-by: Russell King (Oracle) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Victor Nogueira says:
====================
net: sched: Fill in missing MODULE_DESCRIPTIONs for net/sched
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Fill in the missing MODULE_DESCRIPTIONs for net/sched
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Fill in missing MODULE_DESCRIPTIONs for TC qdiscs.
Signed-off-by: Victor Nogueira <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Reviewed-by: Vinicius Costa Gomes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Fill in missing MODULE_DESCRIPTIONs for TC classifiers.
Signed-off-by: Victor Nogueira <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Reviewed-by: Vinicius Costa Gomes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Gate is the only TC action that is lacking such description.
Fill MODULE_DESCRIPTION for Gate TC ACTION.
Signed-off-by: Victor Nogueira <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Reviewed-by: Vinicius Costa Gomes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|