aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-11-07test/vsock fix: add missing check on socket creationFilippo Storniolo1-0/+8
Add check on socket() return value in vsock_listen() and vsock_connect() Co-developed-by: Luigi Leonardi <[email protected]> Signed-off-by: Luigi Leonardi <[email protected]> Signed-off-by: Filippo Storniolo <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-07vsock/virtio: remove socket from connected/bound list on shutdownFilippo Storniolo1-5/+11
If the same remote peer, using the same port, tries to connect to a server on a listening port more than once, the server will reject the connection, causing a "connection reset by peer" error on the remote peer. This is due to the presence of a dangling socket from a previous connection in both the connected and bound socket lists. The inconsistency of the above lists only occurs when the remote peer disconnects and the server remains active. This bug does not occur when the server socket is closed: virtio_transport_release() will eventually schedule a call to virtio_transport_do_close() and the latter will remove the socket from the bound and connected socket lists and clear the sk_buff. However, virtio_transport_do_close() will only perform the above actions if it has been scheduled, and this will not happen if the server is processing the shutdown message from a remote peer. To fix this, introduce a call to vsock_remove_sock() when the server is handling a client disconnect. This is to remove the socket from the bound and connected socket lists without clearing the sk_buff. Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Reported-by: Daan De Meyer <[email protected]> Tested-by: Daan De Meyer <[email protected]> Co-developed-by: Luigi Leonardi <[email protected]> Signed-off-by: Luigi Leonardi <[email protected]> Signed-off-by: Filippo Storniolo <[email protected]> Reviewed-by: Stefano Garzarella <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-07tcp: Fix -Wc23-extensions in tcp_options_write()Nathan Chancellor1-31/+39
Clang warns (or errors with CONFIG_WERROR=y) when CONFIG_TCP_AO is set: net/ipv4/tcp_output.c:663:2: error: label at end of compound statement is a C23 extension [-Werror,-Wc23-extensions] 663 | } | ^ 1 error generated. On earlier releases (such as clang-11, the current minimum supported version for building the kernel) that do not support C23, this was a hard error unconditionally: net/ipv4/tcp_output.c:663:2: error: expected statement } ^ 1 error generated. While adding a semicolon after the label would resolve this, it is more in line with the kernel as a whole to refactor this block into a standalone function, which means the goto a label construct can just be replaced with a return statement. Do so to resolve the warning. Closes: https://github.com/ClangBuiltLinux/linux/issues/1953 Fixes: 1e03d32bea8e ("net/tcp: Add TCP-AO sign to outgoing packets") Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Dmitry Safonov <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-07tg3: Fix the TX ring stallAlex Pakhunov1-11/+42
The TX ring maintained by the tg3 driver can end up in the state, when it has packets queued for sending but the NIC hardware is not informed, so no progress is made. This leads to a multi-second interruption in network traffic followed by dev_watchdog() firing and resetting the queue. The specific sequence of steps is: 1. tg3_start_xmit() is called at least once and queues packet(s) without updating tnapi->prodmbox (netdev_xmit_more() returns true) 2. tg3_start_xmit() is called with an SKB which causes tg3_tso_bug() to be called. 3. tg3_tso_bug() determines that the SKB is too large, ... if (unlikely(tg3_tx_avail(tnapi) <= frag_cnt_est)) { ... stops the queue, and returns NETDEV_TX_BUSY: netif_tx_stop_queue(txq); ... if (tg3_tx_avail(tnapi) <= frag_cnt_est) return NETDEV_TX_BUSY; 4. Since all tg3_tso_bug() call sites directly return, the code updating tnapi->prodmbox is skipped. 5. The queue is stuck now. tg3_start_xmit() is not called while the queue is stopped. The NIC is not processing new packets because tnapi->prodmbox wasn't updated. tg3_tx() is not called by tg3_poll_work() because the all TX descriptions that could be freed has been freed: /* run TX completion thread */ if (tnapi->hw_status->idx[0].tx_consumer != tnapi->tx_cons) { tg3_tx(tnapi); 6. Eventually, dev_watchdog() fires triggering a reset of the queue. This fix makes sure that the tnapi->prodmbox update happens regardless of the reason tg3_start_xmit() returned. Signed-off-by: Alex Pakhunov <[email protected]> Signed-off-by: Vincent Wong <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-07s390/qeth: Fix typo 'weed' in commentKuan-Wei Chiu1-1/+1
Replace 'weed' with 'we' in the comment. Signed-off-by: Kuan-Wei Chiu <[email protected]> Reviewed-by: Alexandra Winter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-11-07Merge tag 'vfs-6.7.fsid' of ↵Linus Torvalds29-65/+168
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fanotify fsid updates from Christian Brauner: "This work is part of the plan to enable fanotify to serve as a drop-in replacement for inotify. While inotify is availabe on all filesystems, fanotify currently isn't. In order to support fanotify on all filesystems two things are needed: (1) all filesystems need to support AT_HANDLE_FID (2) all filesystems need to report a non-zero f_fsid This contains (1) and allows filesystems to encode non-decodable file handlers for fanotify without implementing any exportfs operations by encoding a file id of type FILEID_INO64_GEN from i_ino and i_generation. Filesystems that want to opt out of encoding non-decodable file ids for fanotify that don't support NFS export can do so by providing an empty export_operations struct. This also partially addresses (2) by generating f_fsid for simple filesystems as well as freevxfs. Remaining filesystems will be dealt with by separate patches. Finally, this contains the patch from the current exportfs maintainers which moves exportfs under vfs with Chuck, Jeff, and Amir as maintainers and vfs.git as tree" * tag 'vfs-6.7.fsid' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: MAINTAINERS: create an entry for exportfs fs: fix build error with CONFIG_EXPORTFS=m or not defined freevxfs: derive f_fsid from bdev->bd_dev fs: report f_fsid from s_dev for "simple" filesystems exportfs: support encoding non-decodeable file handles by default exportfs: define FILEID_INO64_GEN* file handle types exportfs: make ->encode_fh() a mandatory method for NFS export exportfs: add helpers to check if filesystem can encode/decode file handles
2023-11-07Merge tag 'vfs-6.7.iomap' of ↵Linus Torvalds1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull iomap maintainership rotation from Christian Brauner: "As discussed on list last week this makes fs/iomap part of vfs.git with Darrick as main reviewer" * tag 'vfs-6.7.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: iomap: rename iomap entry iomap: rotate maintainers
2023-11-07Merge tag 'gfs2-v6.6-rc2-fixes' of ↵Linus Torvalds30-433/+421
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2 Pull gfs2 updates from Andreas Gruenbacher: - Don't update inode timestamps for direct writes (performance regression fix) - Skip no-op quota records instead of panicing - Fix a RCU race in gfs2_permission() - Various other smaller fixes and cleanups all over the place * tag 'gfs2-v6.6-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (24 commits) gfs2: don't withdraw if init_threads() got interrupted gfs2: remove dead code in add_to_queue gfs2: Fix slab-use-after-free in gfs2_qd_dealloc gfs2: Silence "suspicious RCU usage in gfs2_permission" warning gfs2: fs: derive f_fsid from s_uuid gfs2: No longer use 'extern' in function declarations gfs2: Rename gfs2_lookup_{ simple => meta } gfs2: Convert gfs2_internal_read to folios gfs2: Convert stuffed_readpage to folios gfs2: Minor gfs2_write_jdata_batch PAGE_SIZE cleanup gfs2: Get rid of gfs2_alloc_blocks generation parameter gfs2: Add metapath_dibh helper gfs2: Clean up quota.c:print_message gfs2: Clean up gfs2_alloc_parms initializers gfs2: Two quota=account mode fixes gfs2: Stop using GFS2_BASIC_BLOCK and GFS2_BASIC_BLOCK_SHIFT gfs2: setattr_chown: Add missing initialization gfs2: fix an oops in gfs2_permission gfs2: ignore negated quota changes gfs2: Don't update inode timestamps for direct writes ...
2023-11-07Merge tag 'ovl-update-6.7' of ↵Linus Torvalds16-532/+929
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs Pull overlayfs updates from Amir Goldstein: - Overlayfs aio cleanups and fixes Cleanups and minor fixes in preparation for factoring out of read/write passthrough code. - Overlayfs lock ordering changes Hold mnt_writers only throughout copy up instead of a long lived elevated refcount. - Add support for nesting overlayfs private xattrs There are cases where you want to use an overlayfs mount as a lowerdir for another overlayfs mount. For example, if the system rootfs is on overlayfs due to composefs, or to make it volatile (via tmpfs), then you cannot currently store a lowerdir on the rootfs, because the inner overlayfs will eat all the whiteouts and overlay xattrs. This means you can't e.g. store on the rootfs a prepared container image for use with overlayfs. This adds support for nesting of overlayfs mounts by escaping the problematic features and unescaping them when exposing to the overlayfs user. - Add new mount options for appending lowerdirs * tag 'ovl-update-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: add support for appending lowerdirs one by one ovl: refactor layer parsing helpers ovl: store and show the user provided lowerdir mount option ovl: remove unused code in lowerdir param parsing ovl: Add documentation on nesting of overlayfs mounts ovl: Add an alternative type of whiteout ovl: Support escaped overlay.* xattrs ovl: Add OVL_XATTR_TRUSTED/USER_PREFIX_LEN macros ovl: Move xattr support to new xattrs.c file ovl: do not encode lower fh with upper sb_writers held ovl: do not open/llseek lower file with upper sb_writers held ovl: reorder ovl_want_write() after ovl_inode_lock() ovl: split ovl_want_write() into two helpers ovl: add helper ovl_file_modified() ovl: protect copying of realinode attributes to ovl inode ovl: punt write aio completion to workqueue ovl: propagate IOCB_APPEND flag on writes to realfile ovl: use simpler function to convert iocb to rw flags
2023-11-07Merge branch 'pm-tools'Rafael J. Wysocki1-1/+1
Merge cpupower utility update for 6.7-rc1: - Fix a reference to a removed document in the cpupower utility documentation (Vegard Nossum). * pm-tools: cpupower: fix reference to nonexistent document
2023-11-07Merge branch 'pm-cpufreq'Rafael J. Wysocki2-0/+63
Merge branch 'pm-cpufreq' Merge additional Qualcomm cpufreq driver updates for 6.7-rc1: - Add support for several Qualcomm SoC versions (Robert Marko, Varadarajan Narayanan). * pm-cpufreq: cpufreq: qcom-nvmem: Introduce cpufreq for ipq95xx cpufreq: qcom-nvmem: Enable cpufreq for ipq53xx cpufreq: qcom-nvmem: add support for IPQ8074
2023-11-07Merge tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefsLinus Torvalds109-2296/+3982
Pull more bcachefs updates from Kent Overstreet: "Here's the second big bcachefs pull request. This brings your tree up to date with my master branch, which is what existing bcachefs users are currently running. New features: - rebalance_work btree (and metadata version 1.3): the rebalance thread no longer has to scan to find extents that need processing - big scalability improvement. - sb_errors superblock section: this adds counters for each fsck error type, since filesystem creation, along with the date of the most recent error. It'll get us better bug reports (since users do not typically report errors that fsck was able to fix), and I might add telemetry for this in the future. Fixes include: - multiple snapshot deletion fixes - members_v2 fixups - deleted_inodes btree fixes - copygc thread no longer spins when a device is full but has no fragmented buckets (i.e. rebalance needs to move data around instead) - a fix for a memory reclaim issue with the btree key cache: we're now careful not to hold the srcu read lock that blocks key cache reclaim for too long - an early allocator locking fix, from Brian - endianness fixes, from Brian - CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y, a big performance improvement on multithreaded workloads" * tag 'bcachefs-2023-11-5' of https://evilpiepirate.org/git/bcachefs: (70 commits) bcachefs: Improve stripe checksum error message bcachefs: Simplify, fix bch2_backpointer_get_key() bcachefs: kill thing_it_points_to arg to backpointer_not_found() bcachefs: bch2_ec_read_extent() now takes btree_trans bcachefs: bch2_stripe_to_text() now prints ptr gens bcachefs: Don't iterate over journal entries just for btree roots bcachefs: Break up bch2_journal_write() bcachefs: Replace ERANGE with private error codes bcachefs: bkey_copy() is no longer a macro bcachefs: x-macro-ify inode flags enum bcachefs: Convert bch2_fs_open() to darray bcachefs: Move __bch2_members_v2_get_mut to sb-members.h bcachefs: bch2_prt_datetime() bcachefs: CONFIG_BCACHEFS_DEBUG_TRANSACTIONS no longer defaults to y bcachefs: Add a comment for BTREE_INSERT_NOJOURNAL usage bcachefs: rebalance_work btree is not a snapshots btree bcachefs: Add missing printk newlines bcachefs: Fix recovery when forced to use JSET_NO_FLUSH journal entry bcachefs: .get_parent() should return an error pointer bcachefs: Fix bch2_delete_dead_inodes() ...
2023-11-07parisc/pgtable: Do not drop upper 5 address bits of physical addressHelge Deller1-4/+3
When calculating the pfn for the iitlbt/idtlbt instruction, do not drop the upper 5 address bits. This doesn't seem to have an effect on physical hardware which uses less physical address bits, but in qemu the missing bits are visible. Signed-off-by: Helge Deller <[email protected]> Cc: <[email protected]>
2023-11-07nvme: common: make keyring and auth separate modulesArnd Bergmann7-14/+10
When only the keyring module is included but auth is not, modpost complains about the lack of a module license tag: ERROR: modpost: missing MODULE_LICENSE() in drivers/nvme/common/nvme-common.o Address this by making both modules buildable standalone, removing the now unnecessary CONFIG_NVME_COMMON symbol in the process. Also, now that NVME_KEYRING config symbol can be either a module or built-in, the stubs need to check for '#if IS_ENABLED' rather than a simple '#ifdef'. Fixes: 9d77eb5277849 ("nvme-keyring: register '.nvme' keyring") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2023-11-07riscv: split cache ops out of dma-noncoherent.cChristoph Hellwig3-15/+18
The cache ops are also used by the pmem code which is unconditionally built into the kernel. Move them into a separate file that is built based on the correct config option. Fixes: fd962781270e ("riscv: RISCV_NONSTANDARD_CACHE_OPS shouldn't depend on RISCV_DMA_NONCOHERENT") Reported-by: kernel test robot <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Conor Dooley <[email protected]> Tested-by: Conor Dooley <[email protected]> Reviewed-by: Lad Prabhakar <[email protected]> Tested-by: Lad Prabhakar <[email protected]> # Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-11-07drm/amdgpu: add RAS reset/query operations for XGMI v6_4Tao Zhou1-3/+43
Reset/query RAS error status and count. v2: use XGMI IP version instead of WAFL version. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amdgpu: handle extra UE register entries for gfx v9_4_3Tao Zhou1-0/+38
The UE registe list is larger than CE list. Reported-by: [email protected] Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Stanley.Yang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/pm: not stop rlc for IMU enabled APUs when suspendTim Huang1-0/+1
For IMU enabled APUs, after sending the PrepareMp1ForUnload message to SMU in system_features_control, the RLC registers can't be touched. The driver to stop the rlc in suspending is no longer required. Signed-off-by: Tim Huang <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: avoid variable reinitializationBragatheswaran Manickavel1-1/+0
The member variable enable_hpo_pg_support is already initialized and hence the reinitialization instruction can be removed. Issue identified using the doubleinit.cocci Coccinelle semantic patch script. Signed-off-by: Bragatheswaran Manickavel <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/pm: Hide irrelevant pm device attributesLijo Lazar3-8/+20
Change return code to EOPNOTSUPP for unsupported functions. Use the error code information to hide sysfs nodes not valid for the SOC. Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Yang Wang <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amdgpu: Fix sdma 4.4.2 doorbell rptr/wptr initLijo Lazar1-6/+19
Doorbell rptr/wptr can be set through multiple ways including direct register initialization. Disable doorbell during hw_fini once the ring is disabled so that during next module reload direct initialization takes effect. Also, move the direct initialization after minor update is set to 1 since rptr/wptr are reinitialized back to 0 which could be lower than the previous doorbell value (ex: cases like module reload). Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Le Ma <[email protected]> Reviewed-by: Asad Kamal <[email protected]> Tested-by: Asad Kamal <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amdgpu/soc21: add mode2 asic reset for SMU IP v14.0.0Jiadong Zhu1-0/+1
Set the default reset method to mode2 for SMU IP v14.0.0 Signed-off-by: Jiadong Zhu <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Set stream's DP test pattern upon test requestGeorge Shen1-0/+3
[Why] A recent refactor of DC's DP test pattern automation code requires the DC stream's test pattern and test pattern color space fields to be correctly populated before calling dc_link_dp_set_test_pattern. [How] Populate stream's test pattern type and color space fields before calling into DC to program DP test pattern. Reviewed-by: Aurabindo Pillai <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: George Shen <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Fix handling duplicate planes on one streamSung Joon Kim6-34/+90
[why] DML2 does not handle the case when we have a single stream sourcing 2 or more planes that are duplicates of one another. To properly handle this scenario, pipe index to plane index mapping is used to decide which plane is being processed and programmed. [how] Create static array of pipe index to plane index map. Populate the array properly and use in appropriate places. Reviewed-by: Xi (Alex) Liu <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Sung Joon Kim <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: For cursor P-State allow for SubVPAlvin Lee1-15/+2
[Description] - Similar to FPO, SubVP should also force cursor P-State allow instead of relying on natural assertion - Implement code path to force and unforce cursor P-State allow for SubVP Reviewed-by: Samson Tam <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Enable physymclk RCODaniel Miess5-37/+102
[Why] Enable the last of the RCO options for dcn35 [How] Breakout RCO from dccg35_set_physymclk so that physymclk RCO can be set in dccg_init without disabling physymclk Reviewed-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Remove references to unused dml arch versionChaitanya Dhere2-15/+2
Clean-up the code to remove references of all unused dml architecture versions since only dml2 is actively used. Reviewed-by: Jun Lei <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Chaitanya Dhere <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Promote DAL to 3.2.259Aric Cyr1-1/+1
Summary: - Enable DCN35 physymclk root clock gating - Fix DP automation test pattern bug - Disable OTG for mode timing switch on DCN35 - Refactor DML2 - Revert Fix handling duplicate planes on one stream - Revert Enable DCN clock gating - Implement cursor P-State allow for SubVP - Optimize pipe otg allocation - Save and restore mall state while switching from ODM to Subvp Acked-by: Hersen Wu <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: save and restore mall state when applying minimal transitionWenjing Liu1-0/+20
[why] There is a case when we are switching from ODM combine to Subvp where minimal transition based off subvp state is required. In thise case, we need to save and restore mall state when applying minimal transition. Reviewed-by: Dillon Varone <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Wenjing Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Remove unused duplicate register definitionJoshua Aberback1-15/+0
[Why] DCN32 uses ABM register definitions in dcn32_resource.h, remove duplicate from dce_abm.h to avoid confusion. Reviewed-by: Dillon Varone <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Joshua Aberback <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Create optc.h fileRodrigo Siqueira3-186/+221
For all the components that participate in DCN architecture, there is a header in the dc/inch/hw. For some reason, OPTC broke this pattern and added all the primary functions/structs associated with that in the dcn10_optc.h file. For consistency's sake, this commit introduces a new optc.h file and extracts the code from dcn10_optc to this new file. Reviewed-by: Hamza Mahfooz <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Disable OTG for mode timing switch on DCN35Ovidiu Bunea1-1/+2
[why] Doing a mode timing change causes a hang when OTG is not disabled. [how] Add link_enc null check in disable_otg_wa to cover this case. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Ovidiu Bunea <[email protected]> Signed-off-by: Hersen Wu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Revise Replay Desync Error IRQ handleDennis Chan2-0/+4
[Why] Current Desync IRQ handler will have some potential do not hit the desync error case. We change to check both desync error HPD and DPCD. Signed-off-by: Dennis Chan <[email protected]> Acked-by: Hersen Wu <[email protected]> Reviewed-by: Robin Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: [FW Promotion] Release 0.0.190.0Anthony Koo1-2/+2
- Increase number of bits for IPS boot option Reviewed-by: Aric Cyr <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: 3.2.258Aric Cyr1-1/+1
This version brings along following fixes: Update test link rate DPCD bit field to match spec Enable RCO options for dcn35 Add missing dml2 init value for dcn35 Enable DCN clock gating DCN35 Disable cm power optimization Allow 16 max_slices for DP2 DSC Fix OTG disable workaround logic Enable more IPS options Fix FRL assertion on boot Fix missing blendTF programming Update DP HPO MSA with colorimetry from test request Fix handling duplicate planes on one stream Acked-by: Hersen Wu <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Add missing dml2 init value for dcn35Roman Li1-0/+1
[Why] For lighting up, some dml2 params needs to be initialized. One of them escaped initial patch under: "drm/amd/display: Add DCN35 DML2 support" [How] Add missing initialization. Fixes: 115009d11ccf ("drm/amd/display: Add DCN35 DML2 support") Reviewed-by: Harry Wentland <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Fix OTG disable workaround logicTaimur Hassan1-4/+7
[Why] DENTIST was hanging when performing DISPCLK update with OTG enabled, as OTG disable workaround was not executing. [How] Workaround was checking against current_state before running, but when called from optimize_bandwidth (safe_to_lower), we should be checking against context instead. Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: amend HPD handler for ReplayChunTao Tso1-7/+4
[Why] For Replay, if we receive HPD, it doesn’t need to reboot the display. We don’t need to return anything exactly. [How] Return nothing just because we don’t need to reboot the display. Signed-off-by: ChunTao Tso <[email protected]> Acked-by: Hersen Wu <[email protected]> Reviewed-by: Jerry Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Introduce flag for disabling Replay desync recoveryDennis Chan2-1/+5
[why] It's useful to disable the recovery mechanism when debugging replay desync errors. Signed-off-by: Dennis Chan <[email protected]> Acked-by: Hersen Wu <[email protected]> Reviewed-by: Robin Chen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: DCN35 Disable cm power optimizationYihan Zhu1-1/+1
[WHY & HOW] Enabling SCE after boot up will cause color distortion. Reviewed-by: Ovidiu Bunea <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Yihan Zhu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Update DP HPO MSA with colorimetry from test requestGeorge Shen1-5/+4
[Why] Some DP link layer tests request a different colorimetry than the default one that is used. Currently, our test automation logic does not update the MSA with the test request value for DP HPO case. [How] Update HPO MSA colorimetry with test automation request value. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Update test link rate DPCD bit field to match specGeorge Shen2-2/+9
[Why] An SCR was made to the DP2.0 spec that updated the bit field definition for UHBR13.5 in the test link rate DPCD register. [How] Add new translation to match the SCR update. Keep old translation for backwards compatibility. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: George Shen <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Allow 16 max_slices for DP2 DSCFangzhi Zuo3-1/+22
Enable 12 and 16 max_slices for DP2 DSC Reviewed-by: Alvin Lee <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Fangzhi Zuo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Enable more IPS optionsSung Joon Kim3-8/+12
[why] To help isolate static screen and video playback tests, we want to enable an IPS option to allow IPS only on D3 cycle. [how] Add DISABLE_DYNAMIC and DISABLE_ALL IPS disable flags for user control. Reviewed-by: Jun Lei <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Sung Joon Kim <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Enable RCO options for dcn35Daniel Miess2-8/+9
[Why & How] Enable root clock optimization options for dcn35 for power savings Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Daniel Miess <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Fix FRL assertion on bootSung Joon Kim1-4/+5
[why] Make sure to ungate the clocks on boot so programming sequence is done successfully. [how] Move the ungate logic after bios init. Reviewed-by: Xi (Alex) Liu <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Sung Joon Kim <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: Fix missing blendTF programmingIlya Bakoulin1-0/+3
[Why] When MPO surface pixel format is not ARGB8888, fast update can miss programming blendTF. [How] Set the gamma_change update flag on blend_tf change. Reviewed-by: Aric Cyr <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Ilya Bakoulin <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: 3.2.257Aric Cyr1-1/+1
This version brings along following fixes: On boot disable domain22 force power on decouple dmcub execution to reduce lock granularity Enable fast update on blendTF change Fix blend LUT programming Program plane color setting correctly amend HPD handler for Replay Avoid NULL dereference of timing generator Acked-by: Hersen Wu <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: decouple dmcub execution to reduce lock granularityJinZe.Xu2-0/+82
[Why] On some systems dmub commands run at high IRQ, so long running commands will block other interrupts. [How] Decouple wait_for_idle from dmcub queue/execute/wait. Reviewed-by: Josip Pavic <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: JinZe.Xu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2023-11-07drm/amd/display: [FW Promotion] Release 0.0.189.0Anthony Koo1-7/+5
- Minor formatting changes - Update defines to match the bit width of the field it is used for - Add new boot up bits to control HW sub block regions power down Reviewed-by: Aric Cyr <[email protected]> Acked-by: Hersen Wu <[email protected]> Signed-off-by: Anthony Koo <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.