aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-22watchdog: ixp4xx: Rewrite driver to use coreLinus Walleij3-177/+155
This rewrites the IXP4xx watchdog driver as follows: - Spawn the watchdog driver as a platform device from the timer driver. It's one device in the hardware, and the fact that Linux splits the handling into two different devices is a Linux pecularity, and thus it becomes a Linux pecularity to spawn a separate watchdog driver. - Spawn the watchdog driver from the timer driver at probe(). This is well after the timer driver as actually registered and started and we know the register base is available. - Instead of looping back callbacks to the timer drivers for all watchdog calls, pass the register base to the watchdog driver and manage the registers there. The two drivers aren't even interested in the same register so the spinlock is totally surplus, delete it. - Replace pretty much all of the content in the watchdog driver with a simple, modern watchdog driver utilizing the watchdog core instead of registering its own misc device and ioctl() handling. - Drop module parameters as the same already exist in the watchdog core. What remains is a slim elegant (IMO) watchdog driver using the watchdog core, spawning from device tree or boardfile alike. Cc: Daniel Lezcano <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: Start watchdog in watchdog_set_last_hw_keepalive only if appropriateJan Kiszka1-1/+4
We must not pet a running watchdog when handle_boot_enabled is off because this will kick off automatic triggering before userland is running, defeating the purpose of the handle_boot_enabled control. Furthermore, don't ping in case watchdog_set_last_hw_keepalive was called incorrectly when the hardware watchdog is actually not running. Fixed: cef9572e9af3 ("watchdog: add support for adjusting last known HW keepalive time") Signed-off-by: Jan Kiszka <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: max63xx_wdt: Add device tree probingLinus Walleij1-4/+20
This adds device tree probing to the MAX63xx driver so it can be instantiated from the device tree. We use the generic fwnode-based method to get to the match data and clean up by constifying the functions as the match is indeed a const. Cc: Marc Zyngier <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22dt-bindings: watchdog: Add Maxim MAX63xx bindingsLinus Walleij1-0/+44
This adds devicetree bindings for the Maxim MAX63xx watchdog timers. Cc: [email protected] Cc: Marc Zyngier <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: mediatek: mt8195: add wdt supportChristine Zhu1-0/+6
Support MT8195 watchdog device. Signed-off-by: Christine Zhu <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Reviewed-by: Tzung-Bi Shih <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22dt-bindings: reset: mt8195: add toprgu reset-controller header fileChristine Zhu1-0/+29
Add toprgu reset-controller header file for MT8195 platform. Signed-off-by: Christine Zhu <[email protected]> Acked-by: Rob Herring <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: tqmx86: Constify static struct watchdog_opsRikard Falkeborn1-1/+1
The struct tqmx86_wdt_ops is only assigned to the ops pointer in the watchdog_device struct, which is a pointer to const struct watchdog_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: mpc8xxx_wdt: Constify static struct watchdog_opsRikard Falkeborn1-1/+1
The struct mpc8xxx_wdt_ops is only assigned to the ops pointer in the watchdog_device struct, which is a pointer to const struct watchdog_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: sl28cpld_wdt: Constify static struct watchdog_opsRikard Falkeborn1-1/+1
The struct sl28cpld_wdt_ops is only assigned to the ops pointer in the watchdog_device struct, which is a pointer to const struct watchdog_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: iTCO_wdt: Fix detection of SMI-off caseJan Kiszka1-1/+1
Obviously, the test needs to run against the register content, not its address. Fixes: cb011044e34c ("watchdog: iTCO_wdt: Account for rebooting on second timeout") Cc: [email protected] Reported-by: Mantas Mikulėnas <[email protected]> Signed-off-by: Jan Kiszka <[email protected]> Reviewed-by: Paolo Bonzini <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Tested-by: Mantas Mikulėnas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: bcm2835_wdt: consider system-power-controller propertyStefan Wahren1-3/+7
Until now all Raspberry Pi boards used the power off function of the SoC. But the Raspberry Pi 400 uses gpio-poweroff for the whole board which possibly cannot register the poweroff handler because the it's already registered by this watchdog driver. So consider the system-power-controller property for registering, which is already defined in soc/bcm/brcm,bcm2835-pm.txt . Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Nicolas Saenz Julienne <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: imx2_wdg: notify wdog core to stop ping worker on suspendGrzegorz Jaszczyk1-0/+1
Suspend routine disables wdog clk. Nevertheless, the watchdog subsystem is not aware of that and can still try to ping wdog through watchdog_ping_work. In order to prevent such condition and therefore prevent from system hang (caused by the wdog register access issued while the wdog clock is disabled) notify watchdog core that the ping worker should be canceled during watchdog core suspend and restored during resume. Signed-off-by: Michal Koziel <[email protected]> Signed-off-by: Grzegorz Jaszczyk <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: introduce watchdog_dev_suspend/resumeGrzegorz Jaszczyk3-0/+94
The watchdog drivers often disable wdog clock during suspend and then enable it again during resume. Nevertheless the ping worker is still running and can issue low-level ping while the wdog clock is disabled causing the system hang. To prevent such condition register pm notifier in the watchdog core which will call watchdog_dev_suspend/resume and actually cancel ping worker during suspend and restore it back, if needed, during resume. Signed-off-by: Grzegorz Jaszczyk <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: Fix NULL pointer dereference when releasing cdevCurtis Klein1-1/+2
watchdog_hrtimer_pretimeout_stop needs the watchdog device to have a valid pointer to the watchdog core data to stop the pretimeout hrtimer. Therefore it needs to be called before the pointers are cleared in watchdog_cdev_unregister. Fixes: 7b7d2fdc8c3e ("watchdog: Add hrtimer-based pretimeout feature") Reported-by: Colin Ian King <[email protected]> Signed-off-by: Curtis Klein <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: only run driver set_pretimeout op if device supports itCurtis Klein1-1/+1
Some watchdog devices might conditionally support pretimeouts (e.g. if an interrupt is exposed for the device) but some watchdog drivers might still define the set_pretimeout operation (e.g. the mtk_wdt driver) and indicate support at runtime through the WDIOF_PRETIMEOUT flag. If the kernel is compiled with CONFIG_WATCHDOG_HRTIMER_PRETIMEOUT enabled, watchdog_set_pretimeout would run the driver specific set_pretimeout even if WDIOF_PRETIMEOUT is not set which might have unintended consequences. So this change checks that the device flags and only runs the driver operation if pretimeouts are supported. Signed-off-by: Curtis Klein <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-22watchdog: bd70528 drop bd70528 supportMatti Vaittinen3-304/+0
The only known BD70528 use-cases are such that the PMIC is controlled from separate MCU which is not running Linux. I am not aware of any Linux driver users. Furthermore, it seems there is no demand for this IC. Let's ease the maintenance burden and drop the driver. We can always add it back if there is sudden need for it. Signed-off-by: Matti Vaittinen <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/994d2e374262c3f59f4465c03ef23d3116120778.1621937490.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2021-08-19Merge tag 'soc-fixes-5.14-3' of ↵Linus Torvalds10-75/+103
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Not much to see here. Half the fixes this time are for Qualcomm dts files, fixing small mistakes on certain machines. The other fixes are: - A 5.13 regression fix for freescale QE interrupt controller\ - A fix for TI OMAP gpt12 timer error handling - A randconfig build regression fix for ixp4xx - Another defconfig fix following the CONFIG_FB dependency rework" * tag 'soc-fixes-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: soc: fsl: qe: fix static checker warning ARM: ixp4xx: fix building both pci drivers ARM: configs: Update the nhk8815_defconfig bus: ti-sysc: Fix error handling for sysc_check_active_timer() soc: fsl: qe: convert QE interrupt controller to platform_device arm64: dts: qcom: sdm845-oneplus: fix reserved-mem arm64: dts: qcom: msm8994-angler: Disable cont_splash_mem arm64: dts: qcom: sc7280: Fixup cpufreq domain info for cpu7 arm64: dts: qcom: msm8992-bullhead: Fix cont_splash_mem mapping arm64: dts: qcom: msm8992-bullhead: Remove PSCI arm64: dts: qcom: c630: fix correct powerdown pin for WSA881x
2021-08-19Merge tag 'net-5.14-rc7' of ↵Linus Torvalds39-206/+418
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from bpf, wireless and mac80211 trees. Current release - regressions: - tipc: call tipc_wait_for_connect only when dlen is not 0 - mac80211: fix locking in ieee80211_restart_work() Current release - new code bugs: - bpf: add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() - ethernet: ice: fix perout start time rounding - wwan: iosm: prevent underflow in ipc_chnl_cfg_get() Previous releases - regressions: - bpf: clear zext_dst of dead insns - sch_cake: fix srchost/dsthost hashing mode - vrf: reset skb conntrack connection on VRF rcv - net/rds: dma_map_sg is entitled to merge entries Previous releases - always broken: - ethernet: bnxt: fix Tx path locking and races, add Rx path barriers" * tag 'net-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits) net: dpaa2-switch: disable the control interface on error path Revert "flow_offload: action should not be NULL when it is referenced" iavf: Fix ping is lost after untrusted VF had tried to change MAC i40e: Fix ATR queue selection r8152: fix the maximum number of PLA bp for RTL8153C r8152: fix writing USB_BP2_EN mptcp: full fully established support after ADD_ADDR mptcp: fix memory leak on address flush net/rds: dma_map_sg is entitled to merge entries net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU port net: asix: fix uninit value bugs ovs: clear skb->tstamp in forwarding path net: mdio-mux: Handle -EPROBE_DEFER correctly net: mdio-mux: Don't ignore memory allocation errors net: mdio-mux: Delete unnecessary devm_kfree net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, or worse sch_cake: fix srchost/dsthost hashing mode ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error path net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32 mac80211: fix locking in ieee80211_restart_work() ...
2021-08-19Merge tag 'platform-drivers-x86-v5.14-4' of ↵Linus Torvalds2-0/+30
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: - Enable SW_TABLET_MODE support for the TP200s - Enable WMI on two more Gigabyte motherboards * tag 'platform-drivers-x86-v5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: gigabyte-wmi: add support for B450M S2H V2 platform/x86: gigabyte-wmi: add support for X570 GAMING X platform/x86: asus-nb-wmi: Add tablet_mode_sw=lid-flip quirk for the TP200s platform/x86: asus-nb-wmi: Allow configuring SW_TABLET_MODE method with a module option
2021-08-19net: dpaa2-switch: disable the control interface on error pathVladimir Oltean1-18/+18
Currently dpaa2_switch_takedown has a funny name and does not do the opposite of dpaa2_switch_init, which makes probing fail when we need to handle an -EPROBE_DEFER. A sketch of what dpaa2_switch_init does: dpsw_open dpaa2_switch_detect_features dpsw_reset for (i = 0; i < ethsw->sw_attr.num_ifs; i++) { dpsw_if_disable dpsw_if_set_stp dpsw_vlan_remove_if_untagged dpsw_if_set_tci dpsw_vlan_remove_if } dpsw_vlan_remove alloc_ordered_workqueue dpsw_fdb_remove dpaa2_switch_ctrl_if_setup When dpaa2_switch_takedown is called from the error path of dpaa2_switch_probe(), the control interface, enabled by dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled, because dpaa2_switch_takedown does not call dpaa2_switch_ctrl_if_teardown. Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this means that a second probe of the driver will happen with the control interface directly enabled. This will trigger a second error: [ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed [ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13 [ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13 Which if we investigate the /dev/dpaa2_mc_console log, we find out is caused by: [E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in reasonable limits, no reason to change STP state, re-add VLANs etc), and rename it to something more conventional, like dpaa2_switch_teardown. Fixes: 613c0a5810b7 ("staging: dpaa2-switch: enable the control interface") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Ioana Ciornei <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-19Revert "flow_offload: action should not be NULL when it is referenced"Ido Schimmel1-7/+5
This reverts commit 9ea3e52c5bc8bb4a084938dc1e3160643438927a. Cited commit added a check to make sure 'action' is not NULL, but 'action' is already dereferenced before the check, when calling flow_offload_has_one_action(). Therefore, the check does not make any sense and results in a smatch warning: include/net/flow_offload.h:322 flow_action_mixed_hw_stats_check() warn: variable dereferenced before check 'action' (see line 319) Fix by reverting this commit. Cc: gushengxian <[email protected]> Fixes: 9ea3e52c5bc8 ("flow_offload: action should not be NULL when it is referenced") Signed-off-by: Ido Schimmel <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-19Merge branch 'intel-wired-lan-driver-updates-2021-08-18'Jakub Kicinski4-4/+48
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-08-18 This series contains updates to i40e and iavf drivers. Arkadiusz fixes Flow Director not using the correct queue due to calling the wrong pick Tx function for i40e. Sylwester resolves traffic loss for iavf when it attempts to change its MAC address when it does not have permissions to do so. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-19iavf: Fix ping is lost after untrusted VF had tried to change MACSylwester Dziedziuch3-2/+47
Make changes to MAC address dependent on the response of PF. Disallow changes to HW MAC address and MAC filter from untrusted VF, thanks to that ping is not lost if VF tries to change MAC. Add a new field in iavf_mac_filter, to indicate whether there was response from PF for given filter. Based on this field pass or discard the filter. If untrusted VF tried to change it's address, it's not changed. Still filter was changed, because of that ping couldn't go through. Fixes: c5c922b3e09b ("iavf: fix MAC address setting for VFs when filter is rejected") Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Sylwester Dziedziuch <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Gurucharan G <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-19i40e: Fix ATR queue selectionArkadiusz Kubalewski1-2/+1
Without this patch, ATR does not work. Receive/transmit uses queue selection based on SW DCB hashing method. If traffic classes are not configured for PF, then use netdev_pick_tx function for selecting queue for packet transmission. Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx, which ensures that packet is transmitted/received from CPU that is running the application. Reproduction steps: 1. Load i40e driver 2. Map each MSI interrupt of i40e port for each CPU 3. Disable ntuple, enable ATR i.e.: ethtool -K $interface ntuple off ethtool --set-priv-flags $interface flow-director-atr 4. Run application that is generating traffic and is bound to a single CPU, i.e.: taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10 5. Observe behavior: Application's traffic should be restricted to the CPU provided in taskset. Fixes: 89ec1f0886c1 ("i40e: Fix queue-to-TC mapping on Tx") Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Arkadiusz Kubalewski <[email protected]> Tested-by: Dave Switzer <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-19Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski3-6/+29
Daniel Borkmann says: ==================== pull-request: bpf 2021-08-19 We've added 3 non-merge commits during the last 3 day(s) which contain a total of 3 files changed, 29 insertions(+), 6 deletions(-). The main changes are: 1) Fix to clear zext_dst for dead instructions which was causing invalid program rejections on JITs with bpf_jit_needs_zext such as s390x, from Ilya Leoshkevich. 2) Fix RCU splat in bpf_get_current_{ancestor_,}cgroup_id() helpers when they are invoked from sleepable programs, from Yonghong Song. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests, bpf: Test that dead ldx_w insns are accepted bpf: Clear zext_dst of dead insns bpf: Add rcu_read_lock in bpf_get_current_[ancestor_]cgroup_id() helpers ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-19Merge tag 'omap-for-v5.14/gpt12-fix-signed' of ↵Arnd Bergmann1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fix for omap gpt12 timer error handling Two of the recent fixes for ti-sysc driver had bad interaction for a function return value that caused one of the fixes to not work so we need to change the return value handling. Otherwise early beagleboard variants still have a boot issue. * tag 'omap-for-v5.14/gpt12-fix-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: ti-sysc: Fix error handling for sysc_check_active_timer() Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2021-08-19Merge branch 'r8152-bp-settings'David S. Miller1-3/+20
Hayes Wang says: ==================== r8152: fix bp settings Fix the wrong bp settings of the firmware. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-08-19r8152: fix the maximum number of PLA bp for RTL8153CHayes Wang1-2/+19
The maximum PLA bp number of RTL8153C is 16, not 8. That is, the bp 0 ~ 15 are at 0xfc28 ~ 0xfc46, and the bp_en is at 0xfc48. Fixes: 195aae321c82 ("r8152: support new chips") Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-19r8152: fix writing USB_BP2_ENHayes Wang1-1/+1
The register of USB_BP2_EN is 16 bits, so we should use ocp_write_word(), not ocp_write_byte(). Fixes: 9370f2d05a2a ("support request_firmware for RTL8153") Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-19Merge branch 'mptcp-fixes'David S. Miller2-39/+15
Mat Martineau says: ==================== mptcp: Bug fixes Here are two bug fixes for the net tree: Patch 1 fixes a memory leak that could be encountered when clearing the list of advertised MPTCP addresses. Patch 2 fixes a protocol issue early in an MPTCP connection, to ensure both peers correctly understand that the full MPTCP connection handshake has completed even when the server side quickly sends an ADD_ADDR option. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-08-19mptcp: full fully established support after ADD_ADDRMatthieu Baerts1-7/+3
If directly after an MP_CAPABLE 3WHS, the client receives an ADD_ADDR with HMAC from the server, it is enough to switch to a "fully established" mode because it has received more MPTCP options. It was then OK to enable the "fully_established" flag on the MPTCP socket. Still, best to check if the ADD_ADDR looks valid by looking if it contains an HMAC (no 'echo' bit). If an ADD_ADDR echo is received while we are not in "fully established" mode, it is strange and then we should not switch to this mode now. But that is not enough. On one hand, the path-manager has be notified the state has changed. On the other hand, the "fully_established" flag on the subflow socket should be turned on as well not to re-send the MP_CAPABLE 3rd ACK content with the next ACK. Fixes: 84dfe3677a6f ("mptcp: send out dedicated ADD_ADDR packet") Signed-off-by: Matthieu Baerts <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-19mptcp: fix memory leak on address flushPaolo Abeni1-32/+12
The endpoint cleanup path is prone to a memory leak, as reported by syzkaller: BUG: memory leak unreferenced object 0xffff88810680ea00 (size 64): comm "syz-executor.6", pid 6191, jiffies 4295756280 (age 24.138s) hex dump (first 32 bytes): 58 75 7d 3c 80 88 ff ff 22 01 00 00 00 00 ad de Xu}<...."....... 01 00 02 00 00 00 00 00 ac 1e 00 07 00 00 00 00 ................ backtrace: [<0000000072a9f72a>] kmalloc include/linux/slab.h:591 [inline] [<0000000072a9f72a>] mptcp_nl_cmd_add_addr+0x287/0x9f0 net/mptcp/pm_netlink.c:1170 [<00000000f6e931bf>] genl_family_rcv_msg_doit.isra.0+0x225/0x340 net/netlink/genetlink.c:731 [<00000000f1504a2c>] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] [<00000000f1504a2c>] genl_rcv_msg+0x341/0x5b0 net/netlink/genetlink.c:792 [<0000000097e76f6a>] netlink_rcv_skb+0x148/0x430 net/netlink/af_netlink.c:2504 [<00000000ceefa2b8>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:803 [<000000008ff91aec>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000008ff91aec>] netlink_unicast+0x537/0x750 net/netlink/af_netlink.c:1340 [<0000000041682c35>] netlink_sendmsg+0x846/0xd80 net/netlink/af_netlink.c:1929 [<00000000df3aa8e7>] sock_sendmsg_nosec net/socket.c:704 [inline] [<00000000df3aa8e7>] sock_sendmsg+0x14e/0x190 net/socket.c:724 [<000000002154c54c>] ____sys_sendmsg+0x709/0x870 net/socket.c:2403 [<000000001aab01d7>] ___sys_sendmsg+0xff/0x170 net/socket.c:2457 [<00000000fa3b1446>] __sys_sendmsg+0xe5/0x1b0 net/socket.c:2486 [<00000000db2ee9c7>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<00000000db2ee9c7>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<000000005873517d>] entry_SYSCALL_64_after_hwframe+0x44/0xae We should not require an allocation to cleanup stuff. Rework the code a bit so that the additional RCU work is no more needed. Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-18net/rds: dma_map_sg is entitled to merge entriesGerd Rausch1-2/+2
Function "dma_map_sg" is entitled to merge adjacent entries and return a value smaller than what was passed as "nents". Subsequently "ib_map_mr_sg" needs to work with this value ("sg_dma_len") rather than the original "nents" parameter ("sg_len"). This old RDS bug was exposed and reliably causes kernel panics (using RDMA operations "rds-stress -D") on x86_64 starting with: commit c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops") Simply put: Linux 5.11 and later. Signed-off-by: Gerd Rausch <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-18net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU portVladimir Oltean1-0/+1
Currently we are unable to ping a bridge on top of a felix switch which uses the ocelot-8021q tagger. The packets are dropped on the ingress of the user port and the 'drop_local' counter increments (the counter which denotes drops due to no valid destinations). Dumping the PGID tables, it becomes clear that the PGID_SRC of the user port is zero, so it has no valid destinations. But looking at the code, the cpu_fwd_mask (the bit mask of DSA tag_8021q ports) is clearly missing from the forwarding mask of ports that are under a bridge. So this has always been broken. Looking at the version history of the patch, in v7 https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/ the code looked like this: /* Standalone ports forward only to DSA tag_8021q CPU ports */ unsigned long mask = cpu_fwd_mask; (...) } else if (ocelot->bridge_fwd_mask & BIT(port)) { mask |= ocelot->bridge_fwd_mask & ~BIT(port); while in v8 (the merged version) https://patchwork.kernel.org/project/netdevbpf/patch/[email protected]/ it looked like this: unsigned long mask; (...) } else if (ocelot->bridge_fwd_mask & BIT(port)) { mask = ocelot->bridge_fwd_mask & ~BIT(port); So the breakage was introduced between v7 and v8 of the patch. Fixes: e21268efbe26 ("net: dsa: felix: perform switch setup for tag_8021q") Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-18Merge tag 'for-5.14-rc6-tag' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One more fix for cross-rename, adding a missing check for directory and subvolume, this could lead to a crash" * tag 'for-5.14-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: prevent rename2 from exchanging a subvol with a directory from different parents
2021-08-18Merge tag 'sound-5.14-rc7' of ↵Linus Torvalds7-9/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Only a few regression fixes and trivial device quirks" * tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/via: Apply runtime PM workaround for ASUS B23E ALSA: hda: Fix hang during shutdown due to link reset ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop ALSA: oxfw: fix functioal regression for silence in Apogee Duet FireWire ALSA: hda - fix the 'Capture Switch' value change notifications
2021-08-18Merge tag 'cfi-v5.14-rc7' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull clang cfi fix from Kees Cook: - Use rcu_read_{un}lock_sched_notrace to avoid recursion (Elliot Berman) * tag 'cfi-v5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: cfi: Use rcu_read_{un}lock_sched_notrace
2021-08-18pipe: avoid unnecessary EPOLLET wakeups under normal loadsLinus Torvalds2-6/+11
I had forgotten just how sensitive hackbench is to extra pipe wakeups, and commit 3a34b13a88ca ("pipe: make pipe writes always wake up readers") ended up causing a quite noticeable regression on larger machines. Now, hackbench isn't necessarily a hugely meaningful benchmark, and it's not clear that this matters in real life all that much, but as Mel points out, it's used often enough when comparing kernels and so the performance regression shows up like a sore thumb. It's easy enough to fix at least for the common cases where pipes are used purely for data transfer, and you never have any exciting poll usage at all. So set a special 'poll_usage' flag when there is polling activity, and make the ugly "EPOLLET has crazy legacy expectations" semantics explicit to only that case. I would love to limit it to just the broken EPOLLET case, but the pipe code can't see the difference between epoll and regular select/poll, so any non-read/write waiting will trigger the extra wakeup behavior. That is sufficient for at least the hackbench case. Apart from making the odd extra wakeup cases more explicitly about EPOLLET, this also makes the extra wakeup be at the _end_ of the pipe write, not at the first write chunk. That is actually much saner semantics (as much as you can call any of the legacy edge-triggered expectations for EPOLLET "sane") since it means that you know the wakeup will happen once the write is done, rather than possibly in the middle of one. [ For stable people: I'm putting a "Fixes" tag on this, but I leave it up to you to decide whether you actually want to backport it or not. It likely has no impact outside of synthetic benchmarks - Linus ] Link: https://lore.kernel.org/lkml/20210802024945.GA8372@xsang-OptiPlex-9020/ Fixes: 3a34b13a88ca ("pipe: make pipe writes always wake up readers") Reported-by: kernel test robot <[email protected]> Tested-by: Sandeep Patil <[email protected]> Tested-by: Mel Gorman <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-08-18platform/x86: gigabyte-wmi: add support for B450M S2H V2Thomas Weißschuh1-0/+1
Reported as working here: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-901207693 Signed-off-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-08-18net: asix: fix uninit value bugsPavel Skripkin1-40/+30
Syzbot reported uninit-value in asix_mdio_read(). The problem was in missing error handling. asix_read_cmd() should initialize passed stack variable smsr, but it can fail in some cases. Then while condidition checks possibly uninit smsr variable. Since smsr is uninitialized stack variable, driver can misbehave, because smsr will be random in case of asix_read_cmd() failure. Fix it by adding error handling and just continue the loop instead of checking uninit value. Added helper function for checking Host_En bit, since wrong loop was used in 4 functions and there is no need in copy-pasting code parts. Cc: Robert Foss <[email protected]> Fixes: d9fe64e51114 ("net: asix: Add in_pm parameter") Reported-by: [email protected] Signed-off-by: Pavel Skripkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-18ovs: clear skb->tstamp in forwarding pathkaixi.fan1-0/+1
fq qdisc requires tstamp to be cleared in the forwarding path. Now ovs doesn't clear skb->tstamp. We encountered a problem with linux version 5.4.56 and ovs version 2.14.1, and packets failed to dequeue from qdisc when fq qdisc was attached to ovs port. Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Signed-off-by: kaixi.fan <[email protected]> Signed-off-by: xiexiaohui <[email protected]> Reviewed-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-18Merge branch 'mdio-fixes'David S. Miller1-13/+24
Saravana Kannan says: ==================== Clean up and fix error handling in mdio_mux_init() This patch series was started due to -EPROBE_DEFER not being handled correctly in mdio_mux_init() and causing issues [1]. While at it, I also did some more error handling fixes and clean ups. The -EPROBE_DEFER fix is the last patch. Ideally, in the last patch we'd treat any error similar to -EPROBE_DEFER but I'm not sure if it'll break any board/platforms where some child mdiobus never successfully registers. If we treated all errors similar to -EPROBE_DEFER, then none of the child mdiobus will work and that might be a regression. If people are sure this is not a real case, then I can fix up the last patch to always fail the entire mdio-mux init if any of the child mdiobus registration fails. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-08-18net: mdio-mux: Handle -EPROBE_DEFER correctlySaravana Kannan1-2/+6
When registering mdiobus children, if we get an -EPROBE_DEFER, we shouldn't ignore it and continue registering the rest of the mdiobus children. This would permanently prevent the deferring child mdiobus from working instead of reattempting it in the future. So, if a child mdiobus needs to be reattempted in the future, defer the entire mdio-mux initialization. This fixes the issue where PHYs sitting under the mdio-mux aren't initialized correctly if the PHY's interrupt controller is not yet ready when the mdio-mux is being probed. Additional context in the link below. Fixes: 0ca2997d1452 ("netdev/of/phy: Add MDIO bus multiplexer support.") Link: https://lore.kernel.org/lkml/CAGETcx95kHrv8wA-O+-JtfH7H9biJEGJtijuPVN0V5dUKUAB3A@mail.gmail.com/#t Signed-off-by: Saravana Kannan <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Marc Zyngier <[email protected]> Tested-by: Marc Zyngier <[email protected]> Acked-by: Kevin Hilman <[email protected]> Tested-by: Kevin Hilman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-18net: mdio-mux: Don't ignore memory allocation errorsSaravana Kannan1-10/+18
If we are seeing memory allocation errors, don't try to continue registering child mdiobus devices. It's unlikely they'll succeed. Fixes: 342fa1964439 ("mdio: mux: make child bus walking more permissive and errors more verbose") Signed-off-by: Saravana Kannan <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Marc Zyngier <[email protected]> Tested-by: Marc Zyngier <[email protected]> Acked-by: Kevin Hilman <[email protected]> Tested-by: Kevin Hilman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-18net: mdio-mux: Delete unnecessary devm_kfreeSaravana Kannan1-1/+0
The whole point of devm_* APIs is that you don't have to undo them if you are returning an error that's going to get propagated out of a probe() function. So delete unnecessary devm_kfree() call in the error return path. Fixes: b60161668199 ("mdio: mux: Correct mdio_mux_init error path issues") Signed-off-by: Saravana Kannan <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Marc Zyngier <[email protected]> Tested-by: Marc Zyngier <[email protected]> Acked-by: Kevin Hilman <[email protected]> Tested-by: Kevin Hilman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-18net: dsa: sja1105: fix use-after-free after calling of_find_compatible_node, ↵Vladimir Oltean1-4/+2
or worse It seems that of_find_compatible_node has a weird calling convention in which it calls of_node_put() on the "from" node argument, instead of leaving that up to the caller. This comes from the fact that of_find_compatible_node with a non-NULL "from" argument it only supposed to be used as the iterator function of for_each_compatible_node(). OF iterator functions call of_node_get on the next OF node and of_node_put() on the previous one. When of_find_compatible_node calls of_node_put, it actually never expects the refcount to drop to zero, because the call is done under the atomic devtree_lock context, and when the refcount drops to zero it triggers a kobject and a sysfs file deletion, which assume blocking context. So any driver call to of_find_compatible_node is probably buggy because an unexpected of_node_put() takes place. What should be done is to use the of_get_compatible_child() function. Fixes: 5a8f09748ee7 ("net: dsa: sja1105: register the MDIO buses for 100base-T1 and 100base-TX") Link: https://lore.kernel.org/netdev/20210814010139.kzryimmp4rizlznt@skbuf/ Suggested-by: Frank Rowand <[email protected]> Suggested-by: Rob Herring <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-18sch_cake: fix srchost/dsthost hashing modeToke Høiland-Jørgensen1-1/+1
When adding support for using the skb->hash value as the flow hash in CAKE, I accidentally introduced a logic error that broke the host-only isolation modes of CAKE (srchost and dsthost keywords). Specifically, the flow_hash variable should stay initialised to 0 in cake_hash() in pure host-based hashing mode. Add a check for this before using the skb->hash value as flow_hash. Fixes: b0c19ed6088a ("sch_cake: Take advantage of skb->hash where appropriate") Reported-by: Pete Heist <[email protected]> Tested-by: Pete Heist <[email protected]> Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-08-18platform/x86: gigabyte-wmi: add support for X570 GAMING XThomas Weißschuh1-0/+1
Reported as working here: https://github.com/t-8ch/linux-gigabyte-wmi-driver/issues/1#issuecomment-900263115 Signed-off-by: Thomas Weißschuh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Hans de Goede <[email protected]>
2021-08-17ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error pathWang Hai1-1/+4
In ixgbe_xsk_pool_enable(), if ixgbe_xsk_wakeup() fails, We should restore the previous state and clean up the resources. Add the missing clear af_xdp_zc_qps and unmap dma to fix this bug. Fixes: d49e286d354e ("ixgbe: add tracking of AF_XDP zero-copy state for each queue pair") Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Wang Hai <[email protected]> Acked-by: Magnus Karlsson <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-08-17Merge tag 'wireless-drivers-2021-08-17' of ↵Jakub Kicinski6-14/+91
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.14 First set of fixes for v5.14 and nothing major this time. New devices for iwlwifi and one fix for a compiler warning. iwlwifi * support for new devices mt76 * fix compiler warning about MT_CIPHER_NONE * tag 'wireless-drivers-2021-08-17' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers: mt76: fix enum type mismatch iwlwifi: add new so-jf devices iwlwifi: add new SoF with JF devices iwlwifi: pnvm: accept multiple HW-type TLVs ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.