| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
rejected
If enabled, we fallback to the platform keyring if the trusted keyring doesn't have
the key used to sign the roothash. But if pkcs7_verify() rejects the key for other
reasons, such as usage restrictions, we do not fallback. Do so.
Follow-up for 6fce1f40e95182ebbfe1ee3096b8fc0b37903269
Suggested-by: Serge Hallyn <[email protected]>
Signed-off-by: Luca Boccassi <[email protected]>
Acked-by: Jarkko Sakkinen <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Maxim Suhanov reported that dm-verity doesn't crash if an I/O error
happens. In theory, this could be used to subvert security, because an
attacker can create sectors that return error with the Write Uncorrectable
command. Some programs may misbehave if they have to deal with EIO.
This commit fixes dm-verity, so that if "panic_on_corruption" or
"restart_on_corruption" was specified and an I/O error happens, the
machine will panic or restart.
This commit also changes kernel_restart to emergency_restart -
kernel_restart calls reboot notifiers and these reboot notifiers may wait
for the bio that failed. emergency_restart doesn't call the notifiers.
Reported-by: Maxim Suhanov <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
Cc: [email protected]
|
|
Fixed some confusing spelling errors that were currently identified,
the details are as follows:
-in the code comments:
dm-cache-target.c: 1371: exclussive ==> exclusive
dm-raid.c: 2522: repective ==> respective
Signed-off-by: Shen Lichuan <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Smatch reported following:
'''
drivers/md/dm-cache-target.c:3204 parse_cblock_range() warn: sscanf doesn't return error codes
drivers/md/dm-cache-target.c:3217 parse_cblock_range() warn: sscanf doesn't return error codes
'''
Sscanf doesn't return negative values at all.
Signed-off-by: Dipendra Khadka <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Reset the data_vio properly for each discard block, and delay
acknowledgement and cleanup until all discard blocks are complete.
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
To ensure code clarity and prevent potential errors, it's advisable
to employ the ';' as a statement separator, except when ',' are
intentionally used for specific purposes.
Signed-off-by: Shen Lichuan <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Add a jump target so that a bit of exception handling can be better reused
at the end of this function implementation.
Signed-off-by: Markus Elfring <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
crypt_set_keyring_key()
The combination of the calls “up_read(&key->sem)” and “key_put(key)”
was immediately used after a return code check for a set_key() call
in this function implementation.
Thus use such a function call pair only once instead directly
before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
This reverts commit fa247089de9936a46e290d4724cb5f0b845600f5.
The following sequence of commands causes a livelock - there will be
workqueue process looping and consuming 100% CPU:
dmsetup create --notable test
truncate -s 1MiB testdata
losetup /dev/loop0 testdata
dmsetup load test --table '0 2048 linear /dev/loop0 0'
dd if=/dev/zero of=/dev/dm-0 bs=16k count=1 conv=fdatasync
The livelock is caused by the commit fa247089de99. The commit claims that
it fixes a race condition, however, it is unknown what the actual race
condition is and what program is involved in the race condition.
When the inactive table is loaded, the nodes /dev/dm-0 and
/sys/block/dm-0 are created. /dev/dm-0 has zero size at this point. When
the device is suspended and resumed, the nodes /dev/mapper/test and
/dev/disk/* are created.
If some program opens a block device before it is created by dmsetup or
lvm, the program is buggy, so dm could just report an error as it used to
do before.
Reported-by: Zdenek Kabelac <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
Fixes: fa247089de99 ("dm: requeue IO if mapping table not yet available")
|
|
sb_mac() verifies that the superblock + MAC don't exceed 512 bytes.
Because the superblock is currently 64 bytes, this really verifies
mac_size <= 448. This confuses smatch into thinking that mac_size may
be as large as 448, which is inconsistent with the later code that
assumes the MAC fits in a buffer of size HASH_MAX_DIGESTSIZE (64).
In fact mac_size <= HASH_MAX_DIGESTSIZE is guaranteed by the crypto API,
as that is the whole point of HASH_MAX_DIGESTSIZE. But, let's be
defensive and explicitly check for this. This suppresses the false
positive smatch warning. It does not fix an actual bug.
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Eric Biggers <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
In the kernel 6.11, dm-integrity was enhanced with an inline ('I') mode.
This mode uses devices with non-power-of-2 sector size. The extra
metadata after each sector are used to hold the integrity hash.
This commit enhances the inline mode, so that there is automatic
recalculation of the integrity hashes when the 'reclaculate' parameter is
used. It allows us to activate the device instantly, and the
recalculation is done on background.
If the device is deactivated while recalculation is in progress, it will
remember the point where it stopped and it will continue from this point
when activated again.
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <[email protected]>
Reviewed-by: Mike Snitzer <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
This commit fixes gcc 5 warning "logical not is only applied to the left
hand side of comparison"
Reported-by: Geert Uytterhoeven <[email protected]>
Fixes: fb0987682c62 ("dm-integrity: introduce the Inline mode")
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
We have for some time the __assign_bit() API to replace
open coded
if (foo)
__set_bit(n, bar);
else
__clear_bit(n, bar);
Use this API to simplify the code. No functional change
intended.
Signed-off-by: Hongbo Li <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
In IS_ERR, the unlikely is used for the input parameter,
so these is no need to use it again outside.
Signed-off-by: Hongbo Li <[email protected]>
Signed-off-by: Kunwu Chan <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Use ERR_CAST() as it is designed for casting an error pointer to
another type.
This macro utilizes the __force and __must_check modifiers, which instruct
the compiler to verify for errors at the locations where it is employed.
Signed-off-by: Yuesong Li <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
list_entry() will never return a NULL pointer, thus remove the
check.
Signed-off-by: Yuesong Li <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
For the MAC based integrity operation, the integrity key size (i.e.
key_mac_size) is currently set to the digest size of the used digest.
For wrapped key HMAC algorithms, the key size is independent of the
cryptographic key size. So there is no known size of the mac key in
such cases. The desired key size can optionally be specified as argument
when the dm-crypt device is configured via 'integrity_key_size:%u'.
If no integrity_key_size argument is specified, the mac key size
is still set to the digest size, as before.
Increase version number to 1.28.0 so that support for the new
argument can be detected by user space (i.e. cryptsetup).
Signed-off-by: Ingo Franzki <[email protected]>
Reviewed-by: Milan Broz <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
dm_zone_map_bio() has beed removed since commit f211268ed1f9 ("dm: Use
the block layer zone append emulation"), remain the declaration unused in
header files. So, let's remove this unused declaration and empty
definition.
Signed-off-by: Zhang Zekun <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
This commit improves documentation of the dm-delay target.
Signed-off-by: Heinz Mauelshagen <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Commit ae6ad75e5c3c ("dm: remove unused dm_get_rq_mapinfo()")
removed the implementation but leave declaration.
Signed-off-by: Yue Haibing <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Ensure the recovery journal does not attempt recovery when blocks
with mismatched metadata versions are detected. This check is
performed after determining that the blocks are otherwise valid
so that it does not interfere with normal recovery.
Signed-off-by: Susan LeGendre-McGhee <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Abort the load process with status code VDO_UNSUPPORTED_VERSION
without forcing read-only mode when a journal block with the
old format version is detected.
Forcing the VDO volume into read-only mode and thus requiring
a read-only rebuild should only be done when absolutely necessary.
Signed-off-by: Susan LeGendre-McGhee <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Add a new dmsetup message called config, which will return
useful configuration information for the vdo volume and
the uds index associated with it. The output is a YAML
string, and contains a version number to allow future
additions to the content.
Signed-off-by: Bruce Johnston <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Remove this check to prevent spurious warning messages due to
the behavior of other storage layers. This check was intended
to make sure dm-vdo does not chain metadata bios together.
However, vdo has no control over underlying storage layers,
so the assertion is not always true.
Signed-off-by: Ken Raeburn <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
Clear the dedupe_context pointer in a data_vio whenever ownership of
the context is lost, so that vdo can't examine it accidentally.
Signed-off-by: Ken Raeburn <[email protected]>
Signed-off-by: Matthew Sakai <[email protected]>
Signed-off-by: Mikulas Patocka <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two driver fixes for regressions from 6.11-rc1 due to the
driver core change making a structure in a driver core callback const.
These were missed by all testing EXCEPT for what Bart happened to be
running, so I appreciate the fixes provided here for some
odd/not-often-used driver subsystems that nothing else happened to
catch.
Both of these fixes have been in linux-next all week with no reported
issues"
* tag 'driver-core-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
mips: sgi-ip22: Fix the build
ARM: riscpc: ecard: Fix the build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc fixes from Greg KH:
"Here are some small char/misc fixes for 6.11-rc4 to resolve reported
problems. Included in here are:
- fastrpc revert of a change that broke userspace
- xillybus fixes for reported issues
Half of these have been in linux-next this week with no reported
problems, I don't know if the last bit of xillybus driver changes made
it in, but they are 'obviously correct' so will be safe :)"
* tag 'char-misc-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
char: xillybus: Check USB endpoints when probing device
char: xillybus: Refine workqueue handling
Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"
char: xillybus: Don't destroy workqueue from work item running on it
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.11-rc4 to
resolve some reported problems. Included in here are:
- conmakehash.c userspace build issues
- fsl_lpuart driver fix
- 8250_omap revert for reported regression
- atmel_serial rts flag fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: 8250_omap: Set the console genpd always on if no console suspend"
tty: atmel_serial: use the correct RTS flag.
tty: vt: conmakehash: remove non-portable code printing comment header
tty: serial: fsl_lpuart: mark last busy before uart_add_one_port
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.11-rc4 to
resolve some reported issues. Included in here are:
- thunderbolt driver fixes for reported problems
- typec driver fixes
- xhci fixes
- new device id for ljca usb driver
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
usb: misc: ljca: Add Lunar Lake ljca GPIO HID to ljca_gpio_hids[]
Revert "usb: typec: tcpm: clear pd_event queue in PORT_RESET"
usb: typec: ucsi: Fix the return value of ucsi_run_command()
usb: xhci: fix duplicate stall handling in handle_tx_event()
usb: xhci: Check for xhci->interrupters being allocated in xhci_mem_clearup()
thunderbolt: Mark XDomain as unplugged when router is removed
thunderbolt: Fix memory leaks in {port|retimer}_sb_regs_write()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull more btrfs fixes from David Sterba:
"A more fixes. We got reports that shrinker added in 6.10 still causes
latency spikes and the fixes don't handle all corner cases. Due to
summer holidays we're taking a shortcut to disable it for release
builds and will fix it in the near future.
- only enable extent map shrinker for DEBUG builds, temporary quick
fix to avoid latency spikes for regular builds
- update target inode's ctime on unlink, mandated by POSIX
- properly take lock to read/update block group's zoned variables
- add counted_by() annotations"
* tag 'for-6.11-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: only enable extent map shrinker for DEBUG builds
btrfs: zoned: properly take lock to read/update block group's zoned variables
btrfs: tree-checker: add dev extent item checks
btrfs: update target inode's ctime on unlink
btrfs: send: annotate struct name_cache_entry with __counted_by()
|
|
fuse_notify_store(), unlike fuse_do_readpage(), does not enable page
zeroing (because it can be used to change partial page contents).
So fuse_notify_store() must be more careful to fully initialize page
contents (including parts of the page that are beyond end-of-file)
before marking the page uptodate.
The current code can leave beyond-EOF page contents uninitialized, which
makes these uninitialized page contents visible to userspace via mmap().
This is an information leak, but only affects systems which do not
enable init-on-alloc (via CONFIG_INIT_ON_ALLOC_DEFAULT_ON=y or the
corresponding kernel command line parameter).
Link: https://bugs.chromium.org/p/project-zero/issues/detail?id=2574
Cc: [email protected]
Fixes: a1d75f258230 ("fuse: add store request")
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"16 hotfixes. All except one are for MM. 10 of these are cc:stable and
the others pertain to post-6.10 issues.
As usual with these merges, singletons and doubletons all over the
place, no identifiable-by-me theme. Please see the lovingly curated
changelogs to get the skinny"
* tag 'mm-hotfixes-stable-2024-08-17-19-34' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/migrate: fix deadlock in migrate_pages_batch() on large folios
alloc_tag: mark pages reserved during CMA activation as not tagged
alloc_tag: introduce clear_page_tag_ref() helper function
crash: fix riscv64 crash memory reserve dead loop
selftests: memfd_secret: don't build memfd_secret test on unsupported arches
mm: fix endless reclaim on machines with unaccepted memory
selftests/mm: compaction_test: fix off by one in check_compaction()
mm/numa: no task_numa_fault() call if PMD is changed
mm/numa: no task_numa_fault() call if PTE is changed
mm/vmalloc: fix page mapping if vm_area_alloc_pages() with high order fallback to order 0
mm/memory-failure: use raw_spinlock_t in struct memory_failure_cpu
mm: don't account memmap per-node
mm: add system wide stats items category
mm: don't account memmap on failure
mm/hugetlb: fix hugetlb vs. core-mm PT locking
mseal: fix is_madv_discard()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix crashes on 85xx with some configs since the recent hugepd rework.
- Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL on some
platforms.
- Don't enable offline cores when changing SMT modes, to match existing
userspace behaviour.
Thanks to Christophe Leroy, Dr. David Alan Gilbert, Guenter Roeck, Nysal
Jan K.A, Shrikanth Hegde, Thomas Gleixner, and Tyrel Datwyler.
* tag 'powerpc-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/topology: Check if a core is online
cpu/SMT: Enable SMT only if a core is online
powerpc/mm: Fix boot warning with hugepages and CONFIG_DEBUG_VIRTUAL
powerpc/mm: Fix size of allocated PGDIR
soc: fsl: qbman: remove unused struct 'cgr_comp'
|
|
Pull smb client fixes from Steve French:
- fix for clang warning - additional null check
- fix for cached write with posix locks
- flexible structure fix
* tag 'v6.11-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: smb2pdu.h: Use static_assert() to check struct sizes
smb3: fix lock breakage for cached writes
smb/client: avoid possible NULL dereference in cifs_free_subrequest()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C core fix replacing IS_ENABLED() with IS_REACHABLE()
For host drivers, there are two fixes:
- Tegra I2C Controller: Addresses a potential double-locking issue
during probe. ACPI devices are not IRQ-safe when invoking runtime
suspend and resume functions, so the irq_safe flag should not be
set.
- Qualcomm GENI I2C Controller: Fixes an oversight in the exit path
of the runtime_resume() function, which was missed in the previous
release"
* tag 'i2c-for-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Do not mark ACPI devices as irq safe
i2c: Use IS_REACHABLE() for substituting empty ACPI functions
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes to the mpi3mr driver. One to avoid oversize
allocations in tracing and the other to fix an uninitialized spinlock
in the user to driver feature request code (used to trigger dumps and
the like)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpi3mr: Avoid MAX_PAGE_ORDER WARNING for buffer allocations
scsi: mpi3mr: Add missing spin_lock_init() for mrioc->trigger_lock
|
|
Pull xfs fixes from Chandan Babu:
- Check for presence of only 'attr' feature before scrubbing an inode's
attribute fork.
- Restore the behaviour of setting AIL thread to TASK_INTERRUPTIBLE for
long (i.e. 50ms) sleep durations to prevent high load averages.
- Do not allow users to change the realtime flag of a file unless the
datadev and rtdev both support fsdax access modes.
* tag 'xfs-6.11-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: conditionally allow FS_XFLAG_REALTIME changes if S_DAX is set
xfs: revert AIL TASK_KILLABLE threshold
xfs: attr forks require attr, not attr2
|
|
Pull bcachefs fixes from Kent OverstreetL
- New on disk format version, bcachefs_metadata_version_disk_accounting_inum
This adds one more disk accounting counter, which counts disk usage
and number of extents per inode number. This lets us track
fragmentation, for implementing defragmentation later, and it also
counts disk usage per inode in all snapshots, which will be a useful
thing to expose to users.
- One performance issue we've observed is threads spinning when they
should be waiting for dirty keys in the key cache to be flushed by
journal reclaim, so we now have hysteresis for the waiting thread, as
well as improving the tracepoint and a new time_stat, for tracking
time blocked waiting on key cache flushing.
... and various assorted smaller fixes.
* tag 'bcachefs-2024-08-16' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix locking in __bch2_trans_mark_dev_sb()
bcachefs: fix incorrect i_state usage
bcachefs: avoid overflowing LRU_TIME_BITS for cached data lru
bcachefs: Fix forgetting to pass trans to fsck_err()
bcachefs: Increase size of cuckoo hash table on too many rehashes
bcachefs: bcachefs_metadata_version_disk_accounting_inum
bcachefs: Kill __bch2_accounting_mem_mod()
bcachefs: Make bkey_fsck_err() a wrapper around fsck_err()
bcachefs: Fix warning in __bch2_fsck_err() for trans not passed in
bcachefs: Add a time_stat for blocked on key cache flush
bcachefs: Improve trans_blocked_journal_reclaim tracepoint
bcachefs: Add hysteresis to waiting on btree key cache flush
lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
bcachefs: Convert for_each_btree_node() to lockrestart_do()
bcachefs: Add missing downgrade table entry
bcachefs: disk accounting: ignore unknown types
bcachefs: bch2_accounting_invalid() fixup
bcachefs: Fix bch2_trigger_alloc when upgrading from old versions
bcachefs: delete faulty fastpath in bch2_btree_path_traverse_cached()
|
|
We run this in full RW mode now, so we have to guard against the
superblock buffer being reallocated.
Signed-off-by: Kent Overstreet <[email protected]>
|
|
Pull memcg-v1 fix from Al Viro:
"memcg_write_event_control() oops fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
memcg_write_event_control(): fix a user-triggerable oops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Fix the arm64 __get_mem_asm() to use the _ASM_EXTABLE_##type##ACCESS()
macro instead of the *_ERR() one in order to avoid writing -EFAULT to
the value register in case of a fault
- Initialise all elements of the acpi_early_node_map[] to NUMA_NO_NODE.
Prior to this fix, only the first element was initialised
- Move the KASAN random tag seed initialisation after the per-CPU areas
have been initialised (prng_state is __percpu)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix KASAN random tag seed initialization
arm64: ACPI: NUMA: initialize all values of acpi_early_node_map to NUMA_NO_NODE
arm64: uaccess: correct thinko in __get_mem_asm()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One fix for the new T-Head TH1520 clk driver that marks a bus clk
critical so that it isn't turned off during late init which breaks
emmc-sdio"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: thead: fix dependency on clk_ignore_unused
|
|
Pull block fixes from Jens Axboe:
- Fix corruption issues with s390/dasd (Eric, Stefan)
- Fix a misuse of non irq locking grab of a lock (Li)
- MD pull request with a single data corruption fix for raid1 (Yu)
* tag 'block-6.11-20240824' of git://git.kernel.dk/linux:
block: Fix lockdep warning in blk_mq_mark_tag_wait
md/raid1: Fix data corruption for degraded array with slow disk
s390/dasd: fix error recovery leading to data corruption on ESE devices
s390/dasd: Remove DMA alignment
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a comment in the uapi header using the wrong member name (Caleb)
- Fix KCSAN warning for a debug check in sqpoll (me)
- Two more NAPI tweaks (Olivier)
* tag 'io_uring-6.11-20240824' of git://git.kernel.dk/linux:
io_uring: fix user_data field name in comment
io_uring/sqpoll: annotate debug task == current with data_race()
io_uring/napi: remove duplicate io_napi_entry timeout assignation
io_uring/napi: check napi_enabled in io_napi_add() before proceeding
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix a possible (but unlikely) out-of-bounds read in interrupts
parsing code
- Add AT25 EEPROM "fujitsu,mb85rs256" compatible
- Update Konrad Dybcio's email
* tag 'devicetree-fixes-for-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of/irq: Prevent device address out-of-bounds read in interrupt map walk
dt-bindings: eeprom: at25: add fujitsu,mb85rs256 compatible
dt-bindings: Batch-update Konrad Dybcio's email
|
|
Although there are several patches improving the extent map shrinker,
there are still reports of too frequent shrinker behavior, taking too
much CPU for the kswapd process.
So let's only enable extent shrinker for now, until we got more
comprehensive understanding and a better solution.
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
Link: https://lore.kernel.org/linux-btrfs/[email protected]/
Fixes: 956a17d9d050 ("btrfs: add a shrinker for extent maps")
CC: [email protected] # 6.10+
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a Bang-bang thermal governor issue causing it to fail to reset the
state of cooling devices if they are 'on' to start with, but the
thermal zone temperature is always below the corresponding trip point
(Rafael Wysocki)"
* tag 'thermal-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_bang_bang: Use governor_data to reduce overhead
thermal: gov_bang_bang: Add .manage() callback
thermal: gov_bang_bang: Split bang_bang_control()
thermal: gov_bang_bang: Call __thermal_cdev_update() directly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix an issue related to the ACPI EC device handling that causes the
_REG control method to be evaluated for EC operation regions that are
not expected to be used.
This confuses the platform firmware and provokes various types of
misbehavior on some systems (Rafael Wysocki)"
* tag 'acpi-6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: EC: Evaluate _REG outside the EC scope more carefully
ACPICA: Add a depth argument to acpi_execute_reg_methods()
Revert "ACPI: EC: Evaluate orphan _REG under EC device"
|