aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-11-14block: fix 32 bit overflow in __blkdev_issue_discard()Dave Chinner1-1/+3
A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to fall into an endless loop in the discard code. The test is creating a device that is exactly 2^32 sectors in size to test mkfs boundary conditions around the 32 bit sector overflow region. mkfs issues a discard for the entire device size by default, and hence this throws a sector count of 2^32 into blkdev_issue_discard(). It takes the number of sectors to discard as a sector_t - a 64 bit value. The commit ba5d73851e71 ("block: cleanup __blkdev_issue_discard") takes this sector count and casts it to a 32 bit value before comapring it against the maximum allowed discard size the device has. This truncates away the upper 32 bits, and so if the lower 32 bits of the sector count is zero, it starts issuing discards of length 0. This causes the code to fall into an endless loop, issuing a zero length discards over and over again on the same sector. Fixes: ba5d73851e71 ("block: cleanup __blkdev_issue_discard") Tested-by: Darrick J. Wong <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Killed pointless WARN_ON(). Signed-off-by: Jens Axboe <[email protected]>
2018-11-14drm/i915/icl: Drop spurious register read from icl_dbuf_slices_updateMika Kuoppala1-3/+1
Register DBUF_CTL_S2 is read and it's value is not used. As there is no explanation why we should prime the hardware with read, remove it as spurious. Fixes: aa9664ffe863 ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Cc: Mahesh Kumar <[email protected]> Cc: Rodrigo Vivi <[email protected]> Signed-off-by: Mika Kuoppala <[email protected]> Reviewed-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 8577c319b6511fbc391f3775225fecd8b979bc26) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-11-14drm/i915: fix broadwell EU computationLionel Landwerlin1-1/+1
subslice_mask is an array indexed by slice, not subslice. Signed-off-by: Lionel Landwerlin <[email protected]> Fixes: 8cc7669355136f ("drm/i915: store all subslice masks") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712 Reviewed-by: Chris Wilson <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 63ac3328f0d1d37f286e397b14d9596ed09d7ca5) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-11-14xtensa: fix boot parameters address translationMax Filippov1-2/+5
The bootloader may pass physical address of the boot parameters structure to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in the arch/xtensa/kernel/head.S is supposed to map that physical address to the virtual address in the configured virtual memory layout. This code haven't been updated when additional 256+256 and 512+512 memory layouts were introduced and it may produce wrong addresses when used with these layouts. Cc: [email protected] Signed-off-by: Max Filippov <[email protected]>
2018-11-14powerpc/numa: Suppress "VPHN is not supported" messagesSatheesh Rajendran1-1/+1
When VPHN function is not supported and during cpu hotplug event, kernel prints message 'VPHN function not supported. Disabling polling...'. Currently it prints on every hotplug event, it floods dmesg when a KVM guest tries to hotplug huge number of vcpus, let's just print once and suppress further kernel prints. Signed-off-by: Satheesh Rajendran <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-11-13selinux: fix non-MLS handling in mls_context_to_sid()Paul Moore1-3/+7
Commit 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter") inadvertently changed how we handle labels that did not contain MLS information. This patch restores the proper behavior in mls_context_to_sid() and adds a comment explaining the proper behavior to help ensure this doesn't happen again. Fixes: 95ffe194204a ("selinux: refactor mls_context_to_sid() and make it stricter") Reported-by: Stephen Smalley <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2018-11-13ASoC: pcm3060: Rename output widgetsKirill Marinushkin1-8/+4
In the initial commit [1], I added differential output of the codec as separate `+` and `-` widgets: OUTL+ OUTR+ OUTL- OUTR- Later, in the commit [2], I added a device tree property to configure the output as single-ended or differential. Having this property, the `+` and `-` separation in widgets seems for me confusing. There are no functional benefits in such separation, so I find reasonable to get rid of it: OUTL OUTR The new naming is more friendly for sound cards, and is better aligned with other codec drivers in kernel. Renaming the output widgets now should not be a problem from the backwards- compatibility perspective, as the driver for PCM3060 is added into the mainline very recently, and did not yet appear in any releases. [1] commit 6ee47d4a8dac ("ASoC: pcm3060: Add codec driver") [2] commit a78c62de00d5 ("ASoC: pcm3060: Add DT property for single-ended output") Signed-off-by: Kirill Marinushkin <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-11-13ASoC: qcom: Set dai_link id to each dai_linkRohit kumar1-3/+6
Frontend dai_link id is used for closing ADM sessions. During concurrent usecase when one session is closed, it closes other ADM session associated with other usecase too. Dai_link->id should always point to Frontend dai id. Set cpu_dai id as dai_link id to fix the issue. Signed-off-by: Rohit kumar <[email protected]> Acked-by: Srinivas Kandagatla <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-11-13ASoC: sun8i-codec: add missing route for ADCVasily Khoruzhick1-1/+5
sun8i-codec misses a route from ADC to AIF1 Slot 0 ADC. Add it to the driver to avoid adding it to every dts. Fixes: eda85d1fee05d ("ASoC: sun8i-codec: Add ADC support for a33") Signed-off-by: Vasily Khoruzhick <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-11-13NFSv4: Fix an Oops during delegation callbacksTrond Myklebust2-4/+11
If the server sends a CB_GETATTR or a CB_RECALL while the filesystem is being unmounted, then we can Oops when releasing the inode in nfs4_callback_getattr() and nfs4_callback_recall(). Signed-off-by: Trond Myklebust <[email protected]>
2018-11-13integrity: support new struct public_key_signature encoding fieldMimi Zohar1-0/+1
On systems with IMA-appraisal enabled with a policy requiring file signatures, the "good" signature values are stored on the filesystem as extended attributes (security.ima). Signature verification failure would normally be limited to just a particular file (eg. executable), but during boot signature verification failure could result in a system hang. Defining and requiring a new public_key_signature field requires all callers of asymmetric signature verification to be updated to reflect the change. This patch updates the integrity asymmetric_verify() caller. Fixes: 82f94f24475c ("KEYS: Provide software public key query function [ver #2]") Signed-off-by: Mimi Zohar <[email protected]> Cc: David Howells <[email protected]> Acked-by: Denis Kenzior <[email protected]> Signed-off-by: James Morris <[email protected]>
2018-11-13kdb: kdb_support: mark expected switch fall-throughsGustavo A. R. Silva1-3/+3
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: kdb_keyboard: mark expected switch fall-throughsGustavo A. R. Silva1-2/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that in this particular case, I replaced the code comments with a proper "fall through" annotation, which is what GCC is expecting to find. Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: kdb_main: refactor code in kdb_md_lineGustavo A. R. Silva1-18/+3
Replace the whole switch statement with a for loop. This makes the code clearer and easy to read. This also addresses the following Coverity warnings: Addresses-Coverity-ID: 115090 ("Missing break in switch") Addresses-Coverity-ID: 115091 ("Missing break in switch") Addresses-Coverity-ID: 114700 ("Missing break in switch") Suggested-by: Daniel Thompson <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> [[email protected]: Tiny grammar change in description] Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: Use strscpy with destination buffer sizePrarit Bhargava3-12/+15
gcc 8.1.0 warns with: kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’: kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=] strncpy(prefix_name, name, strlen(name)+1); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ kernel/debug/kdb/kdb_support.c:239:31: note: length computed here Use strscpy() with the destination buffer size, and use ellipses when displaying truncated symbols. v2: Use strscpy() Signed-off-by: Prarit Bhargava <[email protected]> Cc: Jonathan Toppins <[email protected]> Cc: Jason Wessel <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: [email protected] Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: print real address of pointers instead of hashed addressesChristophe Leroy2-13/+13
Since commit ad67b74d2469 ("printk: hash addresses printed with %p"), all pointers printed with %p are printed with hashed addresses instead of real addresses in order to avoid leaking addresses in dmesg and syslog. But this applies to kdb too, with is unfortunate: Entering kdb (current=0x(ptrval), pid 329) due to Keyboard Entry kdb> ps 15 sleeping system daemon (state M) processes suppressed, use 'ps A' to see all. Task Addr Pid Parent [*] cpu State Thread Command 0x(ptrval) 329 328 1 0 R 0x(ptrval) *sh 0x(ptrval) 1 0 0 0 S 0x(ptrval) init 0x(ptrval) 3 2 0 0 D 0x(ptrval) rcu_gp 0x(ptrval) 4 2 0 0 D 0x(ptrval) rcu_par_gp 0x(ptrval) 5 2 0 0 D 0x(ptrval) kworker/0:0 0x(ptrval) 6 2 0 0 D 0x(ptrval) kworker/0:0H 0x(ptrval) 7 2 0 0 D 0x(ptrval) kworker/u2:0 0x(ptrval) 8 2 0 0 D 0x(ptrval) mm_percpu_wq 0x(ptrval) 10 2 0 0 D 0x(ptrval) rcu_preempt The whole purpose of kdb is to debug, and for debugging real addresses need to be known. In addition, data displayed by kdb doesn't go into dmesg. This patch replaces all %p by %px in kdb in order to display real addresses. Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13kdb: use correct pointer when 'btc' calls 'btt'Christophe Leroy1-2/+2
On a powerpc 8xx, 'btc' fails as follows: Entering kdb (current=0x(ptrval), pid 282) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0x0 when booting the kernel with 'debug_boot_weak_hash', it fails as well Entering kdb (current=0xba99ad80, pid 284) due to Keyboard Entry kdb> btc btc: cpu status: Currently on cpu 0 Available cpus: 0 kdb_getarea: Bad address 0xba99ad80 On other platforms, Oopses have been observed too, see https://github.com/linuxppc/linux/issues/139 This is due to btc calling 'btt' with %p pointer as an argument. This patch replaces %p by %px to get the real pointer value as expected by 'btt' Fixes: ad67b74d2469 ("printk: hash addresses printed with %p") Cc: <[email protected]> Signed-off-by: Christophe Leroy <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Signed-off-by: Daniel Thompson <[email protected]>
2018-11-13ASoC: Intel: Power down links before turning off display audio powerPierre-Louis Bossart2-12/+11
On certain platforms, Display HDMI HDA codec was not going to sleep state after the use when links are powered down after turning off the display power. As per the HW recommendation, links are powered down before turning off the display power to ensure that the codec goes to sleep state. This patch was updated from an earlier version submitted upstream [1] which conflicted with the changes merged for HDaudio codec support with the Intel DSP. [1] https://patchwork.kernel.org/patch/10540213/ Signed-off-by: Sriram Periyasamy <[email protected]> Signed-off-by: Sanyog Kale <[email protected]> Signed-off-by: Pierre-Louis Bossart <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-11-13ASoC: wm_adsp: Fix dma-unsafe read of scratch registersRichard Fitzgerald1-17/+20
Stack memory isn't DMA-safe so it isn't safe to use either regmap_raw_read or regmap_bulk_read to read into stack memory. The two functions to read the scratch registers were using stack memory and regmap_raw_read. It's not worth allocating memory just for this trivial read, and it isn't time-critical. A simple regmap_read for each register is sufficient. Signed-off-by: Richard Fitzgerald <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-11-13ASoC: rockchip: add missing slave_config setting for I2SKatsuhiro Suzuki1-0/+1
This patch adds missing prepare_sleve_config that is needed for setup the DMA slave channel for I2S. Signed-off-by: Katsuhiro Suzuki <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2018-11-13selinux: check length properly in SCTP bind hookOndrej Mosnacek1-0/+3
selinux_sctp_bind_connect() must verify if the address buffer has sufficient length before accessing the 'sa_family' field. See __sctp_connect() for a similar check. The length of the whole address ('len') is already checked in the callees. Reported-by: Qian Cai <[email protected]> Fixes: d452930fd3b9 ("selinux: Add SCTP support") Cc: <[email protected]> # 4.17+ Cc: Richard Haines <[email protected]> Signed-off-by: Ondrej Mosnacek <[email protected]> Tested-by: Qian Cai <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2018-11-13drm/amdgpu: fix huge page handling on Vega10Christian König1-8/+10
We accidentially set the huge flag on the parent instead of the childs. This caused some VM faults under memory pressure. Signed-off-by: Christian König <[email protected]> Acked-by: Alex Deucher <[email protected]> Tested-by: Samuel Pitoiset <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-11-13drm/amd/pp: Fix truncated clock value when set watermarkRex Zhu1-16/+16
the clk value should be tranferred to MHz first and then transfer to uint16. otherwise, the clock value will be truncated. Reviewed-by: Alex Deucher <[email protected]> Reported-by: Hersen Wu <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-11-13drm/amdgpu: fix bug with IH ring setupPhilip Yang1-1/+1
The bug limits the IH ring wptr address to 40bit. When the system memory is bigger than 1TB, the bus address is more than 40bit, this causes the interrupt cannot be handled and cleared correctly. Reviewed-by: Christian König <[email protected]> Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-13Revert "ACPI/PCI: Pay attention to device-specific _PXM node values"Bjorn Helgaas1-5/+0
This reverts commit bad7dcd94f3956bcfc0a69ef71fdf0fcca3de4a8. bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") caused boot failures (no console output at all) for Martin [1] and Ingo [2] on AMD ThreadRipper systems. Revert the commit until we figure out how to safely use these device-specific _PXM values. [1] https://lore.kernel.org/linux-pci/[email protected] [2] https://lore.kernel.org/linux-pci/[email protected] Fixes: bad7dcd94f39 ("ACPI/PCI: Pay attention to device-specific _PXM node values") Signed-off-by: Bjorn Helgaas <[email protected]>
2018-11-13ALSA: oxfw: add support for APOGEE duet FireWireTakashi Sakamoto2-0/+9
This commit adds support for APOGEE duet FireWire, launched 2007, already discontinued. This model uses Oxford Semiconductor FW971 as its communication engine. Below is information on Configuration ROM of this unit. The unit supports some AV/C commands defined by Audio subunit specification and vendor dependent commands. $ ./hinawa-config-rom-printer /dev/fw1 { 'bus-info': { 'adj': False, 'bmc': False, 'chip_ID': 42949742248, 'cmc': False, 'cyc_clk_acc': 255, 'generation': 0, 'imc': False, 'isc': True, 'link_spd': 3, 'max_ROM': 0, 'max_rec': 64, 'name': '1394', 'node_vendor_ID': 987, 'pmc': False}, 'root-directory': [ ['VENDOR', 987], ['DESCRIPTOR', 'Apogee Electronics'], ['MODEL', 122333], ['DESCRIPTOR', 'Duet'], [ 'NODE_CAPABILITIES', { 'addressing': {'64': True, 'fix': True, 'prv': False}, 'misc': {'int': False, 'ms': False, 'spt': True}, 'state': { 'atn': False, 'ded': False, 'drq': True, 'elo': False, 'init': False, 'lst': True, 'off': False}, 'testing': {'bas': False, 'ext': False}}], [ 'UNIT', [ ['SPECIFIER_ID', 41005], ['VERSION', 65537], ['MODEL', 122333], ['DESCRIPTOR', 'Duet']]]]} Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-11-13drm/meson: venc: dmt mode must use encpJorge Ramirez-Ortiz1-7/+8
The video mode for DMT is only populated to support encp. Signed-off-by: Jorge Ramirez-Ortiz <[email protected]> Acked-by: Neil Armstrong <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-11-12RISC-V: Silence some module warnings on 32-bitOlof Johansson1-6/+6
Fixes: arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:23:27: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:104:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:146:23: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:190:60: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:214:24: note: format string is defined here arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=] arch/riscv/kernel/module.c:236:23: note: format string is defined here Signed-off-by: Olof Johansson <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-11-12RISC-V: lib: Fix build error for 64-bitOlof Johansson1-1/+1
Fixes the following build error from tinyconfig: riscv64-unknown-linux-gnu-ld: kernel/sched/fair.o: in function `.L8': fair.c:(.text+0x70): undefined reference to `__lshrti3' riscv64-unknown-linux-gnu-ld: kernel/time/clocksource.o: in function `.L0 ': clocksource.c:(.text+0x334): undefined reference to `__lshrti3' Fixes: 7f47c73b355f ("RISC-V: Build tishift only on 64-bit") Signed-off-by: Olof Johansson <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-11-12riscv: add missing vdso_install targetDavid Abdurachmanov1-0/+4
Building kernel 4.20 for Fedora as RPM fails, because riscv is missing vdso_install target in arch/riscv/Makefile. Signed-off-by: David Abdurachmanov <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-11-12riscv: fix spacing in struct pt_regsDavid Abdurachmanov1-2/+2
Replace 8 spaces with tab to match styling. Signed-off-by: David Abdurachmanov <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-11-12RISC-V: defconfig: Enable printk timestampsAnup Patel1-0/+1
The printk timestamps are very useful information to visually see where kernel is spending time during boot. It also helps us see the timing of hotplug events at runtime. This patch enables printk timestamps in RISC-V defconfig so that we have it enabled by default (similar to other architectures such as x86_64, arm64, etc). Signed-off-by: Anup Patel <[email protected]> Acked-by: Olof Johansson <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-11-12SUNRPC: Fix a bogus get/put in generic_key_to_expire()Trond Myklebust1-7/+1
Signed-off-by: Trond Myklebust <[email protected]>
2018-11-12SUNRPC: Fix a Oops when destroying the RPCSEC_GSS credential cacheTrond Myklebust1-19/+42
Commit 07d02a67b7fa causes a use-after free in the RPCSEC_GSS credential destroy code, because the call to get_rpccred() in gss_destroying_context() will now always fail to increment the refcount. While we could just replace the get_rpccred() with a refcount_set(), that would have the unfortunate consequence of resurrecting a credential in the credential cache for which we are in the process of destroying the RPCSEC_GSS context. Rather than do this, we choose to make a copy that is never added to the cache and use that to destroy the context. Fixes: 07d02a67b7fa ("SUNRPC: Simplify lookup code") Signed-off-by: Trond Myklebust <[email protected]>
2018-11-12NFSv4: Ensure that the state manager exits the loop on SIGKILLTrond Myklebust1-1/+1
Signed-off-by: Trond Myklebust <[email protected]>
2018-11-12NFSv4: Don't exit the state manager without clearing NFS4CLNT_MANAGER_RUNNINGTrond Myklebust1-3/+5
If we exit the NFSv4 state manager due to a umount, then we can end up leaving the NFS4CLNT_MANAGER_RUNNING flag set. If another mount causes the nfs4_client to be rereferenced before it is destroyed, then we end up never being able to recover state. Fixes: 47c2199b6eb5 ("NFSv4.1: Ensure state manager thread dies on last ...") Signed-off-by: Trond Myklebust <[email protected]> Cc: [email protected] # v4.15+
2018-11-12drm/amdgpu: set system aperture to cover whole FB regionshaoyunl2-6/+6
In XGMI configuration, the FB region covers vram region from peer device, adjust system aperture to cover all of them Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: shaoyunl <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-11-12libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSDDiego Viola1-1/+1
med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q). Set model_rev to NULL and blacklist the device. Cc: [email protected] Signed-off-by: Diego Viola <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-11-12block: copy ioprio in __bio_clone_fast() and bounceHannes Reinecke2-0/+2
We need to copy the io priority, too; otherwise the clone will run with a different priority than the original one. Fixes: 43b62ce3ff0a ("block: move bio io prio to a new field") Signed-off-by: Hannes Reinecke <[email protected]> Signed-off-by: Jean Delvare <[email protected]> Fixed up subject, and ordered stores. Signed-off-by: Jens Axboe <[email protected]>
2018-11-12kyber: fix wrong strlcpy() size in trace_kyber_latency()Omar Sandoval1-4/+4
When copying to the latency type, we should be passing LATENCY_TYPE_LEN, not DOMAIN_LEN (this isn't a problem in practice because we only pass "total" or "I/O"). Fix it by changing all of the strlcpy() calls to use sizeof(). Fixes: 6c3b7af1c975 ("kyber: add tracepoints") Reported-by: Jordan Glover <[email protected]> Tested-by: Jordan Glover <[email protected]> Signed-off-by: Omar Sandoval <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-11-12drm/i915: Fix hpd handling for pins with two encodersVille Syrjälä1-19/+47
In my haste to remove irq_port[] I accidentally changed the way we deal with hpd pins that are shared by multiple encoders (DP and HDMI for pre-DDI platforms). Previously we would only handle such pins via ->hpd_pulse(), but now we queue up the hotplug work for the HDMI encoder directly. Worse yet, we now count each hpd twice and this increment the hpd storm count twice as fast. This can lead to spurious storms being detected. Go back to the old way of doing things, ie. delegate to ->hpd_pulse() for any pin which has an encoder with that hook implemented. I don't really like the idea of adding irq_port[] back so let's loop through the encoders first to check if we have an encoder with ->hpd_pulse() for the pin, and then go through all the pins and decided on the correct course of action based on the earlier findings. I have occasionally toyed with the idea of unifying the pre-DDI HDMI and DP encoders into a single encoder as well. Besides the hotplug processing it would have the other benefit of preventing userspace from trying to enable both encoders at the same time. That is simply illegal as they share the same clock/data pins. We have some testcases that will attempt that and thus fail on many older machines. But for now let's stick to fixing just the hotplug code. Cc: [email protected] # 4.19+ Cc: Lyude Paul <[email protected]> Cc: Rodrigo Vivi <[email protected]> Fixes: b6ca3eee18ba ("drm/i915: Nuke dev_priv->irq_port[]") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Lyude Paul <[email protected]> (cherry picked from commit 5a3aeca97af1b6b3498d59a7fd4e8bb95814c108) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-11-12drm/i915/execlists: Force write serialisation into context image vs executionChris Wilson1-1/+13
Ensure that the writes into the context image are completed prior to the register mmio to trigger execution. Although previously we were assured by the SDM that all writes are flushed before an uncached memory transaction (our mmio write to submit the context to HW for execution), we have empirical evidence to believe that this is not actually the case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656 References: https://bugs.freedesktop.org/show_bug.cgi?id=108315 References: https://bugs.freedesktop.org/show_bug.cgi?id=106887 Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Acked-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Cc: [email protected] (cherry picked from commit 987abd5c62f92ee4970b45aa077f47949974e615) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-11-12drm/i915/icl: Fix power well 2 wrt. DC-off toggling orderImre Deak1-6/+6
To enable DC5/6 power well 2 has to be disabled as for previous platforms, so fix things up. Bspec: 4234 Fixes: 67ca07e7ac10 ("drm/i915/icl: Add power well support") Cc: Animesh Manna <[email protected]> Cc: Paulo Zanoni <[email protected]> Cc: Ville Syrjälä <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit a33e1ece777996ddddb1f23a30f8c66422ed0b68) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-11-12drm/i915: Fix NULL deref when re-enabling HPD IRQs on systems with MSTLyude Paul1-1/+3
Turns out that if you trigger an HPD storm on a system that has an MST topology connected to it, you'll end up causing the kernel to eventually hit a NULL deref: [ 332.339041] BUG: unable to handle kernel NULL pointer dereference at 00000000000000ec [ 332.340906] PGD 0 P4D 0 [ 332.342750] Oops: 0000 [#1] SMP PTI [ 332.344579] CPU: 2 PID: 25 Comm: kworker/2:0 Kdump: loaded Tainted: G O 4.18.0-rc3short-hpd-storm+ #2 [ 332.346453] Hardware name: LENOVO 20BWS1KY00/20BWS1KY00, BIOS JBET71WW (1.35 ) 09/14/2018 [ 332.348361] Workqueue: events intel_hpd_irq_storm_reenable_work [i915] [ 332.350301] RIP: 0010:intel_hpd_irq_storm_reenable_work.cold.3+0x2f/0x86 [i915] [ 332.352213] Code: 00 00 ba e8 00 00 00 48 c7 c6 c0 aa 5f a0 48 c7 c7 d0 73 62 a0 4c 89 c1 4c 89 04 24 e8 7f f5 af e0 4c 8b 04 24 44 89 f8 29 e8 <41> 39 80 ec 00 00 00 0f 85 43 13 fc ff 41 0f b6 86 b8 04 00 00 41 [ 332.354286] RSP: 0018:ffffc90000147e48 EFLAGS: 00010006 [ 332.356344] RAX: 0000000000000005 RBX: ffff8802c226c9d4 RCX: 0000000000000006 [ 332.358404] RDX: 0000000000000000 RSI: 0000000000000082 RDI: ffff88032dc95570 [ 332.360466] RBP: 0000000000000005 R08: 0000000000000000 R09: ffff88031b3dc840 [ 332.362528] R10: 0000000000000000 R11: 000000031a069602 R12: ffff8802c226ca20 [ 332.364575] R13: ffff8802c2268000 R14: ffff880310661000 R15: 000000000000000a [ 332.366615] FS: 0000000000000000(0000) GS:ffff88032dc80000(0000) knlGS:0000000000000000 [ 332.368658] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 332.370690] CR2: 00000000000000ec CR3: 000000000200a003 CR4: 00000000003606e0 [ 332.372724] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 332.374773] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 332.376798] Call Trace: [ 332.378809] process_one_work+0x1a1/0x350 [ 332.380806] worker_thread+0x30/0x380 [ 332.382777] ? wq_update_unbound_numa+0x10/0x10 [ 332.384772] kthread+0x112/0x130 [ 332.386740] ? kthread_create_worker_on_cpu+0x70/0x70 [ 332.388706] ret_from_fork+0x35/0x40 [ 332.390651] Modules linked in: i915(O) vfat fat joydev btusb btrtl btbcm btintel bluetooth ecdh_generic iTCO_wdt wmi_bmof i2c_algo_bit drm_kms_helper intel_rapl syscopyarea sysfillrect x86_pkg_temp_thermal sysimgblt coretemp fb_sys_fops crc32_pclmul drm psmouse pcspkr mei_me mei i2c_i801 lpc_ich mfd_core i2c_core tpm_tis tpm_tis_core thinkpad_acpi wmi tpm rfkill video crc32c_intel serio_raw ehci_pci xhci_pci ehci_hcd xhci_hcd [last unloaded: i915] [ 332.394963] CR2: 00000000000000ec This appears to be due to the fact that with an MST topology, not all intel_connector structs will have ->encoder set. So, fix this by skipping connectors without encoders in intel_hpd_irq_storm_reenable_work(). For those wondering, this bug was found on accident while simulating HPD storms using a Chamelium connected to a ThinkPad T450s (Broadwell). Changes since v1: - Check intel_connector->mst_port instead of intel_connector->encoder Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Cc: [email protected] Cc: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit fee61deecb1d850bf34f682a6a452e5ee51b7572) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-11-12drm/i915: Fix possible race in intel_dp_add_mst_connector()Lyude Paul1-4/+4
This hasn't caused any issues yet that I'm aware of, but as Ville Syrjälä pointed out - we need to make sure that intel_connector->mst_port is set before initializing MST connectors, since in theory we could potentially check intel_connector->mst_port in i915_hpd_poll_init_work() after registering the connector but before having written it's value. Signed-off-by: Lyude Paul <[email protected]> Reviewed-by: Ville Syrjälä <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 66a5ab1034be801630816d1fa6cfc30db1a2f0b0) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-11-12drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5Chris Wilson1-2/+36
Exercising the gpu reloc path strenuously revealed an issue where the updated relocations (from MI_STORE_DWORD_IMM) were not being observed upon execution. After some experiments with adding pipecontrols (a lot of pipecontrols (32) as gen4/5 do not have a bit to wait on earlier pipe controls or even the current on), it was discovered that we merely needed to delay the EMIT_INVALIDATE by several flushes. It is important to note that it is the EMIT_INVALIDATE as opposed to the EMIT_FLUSH that needs the delay as opposed to what one might first expect -- that the delay is required for the TLB invalidation to take effect (one presumes to purge any CS buffers) as opposed to a delay after flushing to ensure the writes have landed before triggering invalidation. Testcase: igt/gem_tiled_fence_blits Signed-off-by: Chris Wilson <[email protected]> Cc: [email protected] Reviewed-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 55f99bf2a9c331838c981694bc872cd1ec4070b2) Signed-off-by: Joonas Lahtinen <[email protected]>
2018-11-12ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap()Takashi Iwai1-1/+1
We need to call pci_iounmap() instead of iounmap() for the regions obtained via pci_iomap() call for some archs that need special treatment. Fixes: aa31704fd81c ("ALSA: hda/ca0132: Add PCI region2 iomap for SBZ") Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-11-12ARM: spectre-v2: per-CPU vtables to work around big.Little systemsRussell King4-15/+61
In big.Little systems, some CPUs require the Spectre workarounds in paths such as the context switch, but other CPUs do not. In order to handle these differences, we need per-CPU vtables. We are unable to use the kernel's per-CPU variables to support this as per-CPU is not initialised at times when we need access to the vtables, so we have to use an array indexed by logical CPU number. We use an array-of-pointers to avoid having function pointers in the kernel's read/write .data section. Reviewed-by: Julien Thierry <[email protected]> Signed-off-by: Russell King <[email protected]>
2018-11-12ARM: 8810/1: vfp: Fix wrong assignement to ufp_excJulien Thierry1-1/+1
In vfp_preserve_user_clear_hwstate, ufp_exc->fpinst2 gets assigned to itself. It should actually be hwstate->fpinst2 that gets assigned to the ufp_exc field. Fixes commit 3aa2df6ec2ca6bc143a65351cca4266d03a8bc41 ("ARM: 8791/1: vfp: use __copy_to_user() when saving VFP state"). Reported-by: David Binderman <[email protected]> Signed-off-by: Julien Thierry <[email protected]> Signed-off-by: Russell King <[email protected]>
2018-11-12ARM: add PROC_VTABLE and PROC_TABLE macrosRussell King2-16/+27
Allow the way we access members of the processor vtable to be changed at compile time. We will need to move to per-CPU vtables to fix the Spectre variant 2 issues on big.Little systems. However, we have a couple of calls that do not need the vtable treatment, and indeed cause a kernel warning due to the (later) use of smp_processor_id(), so also introduce the PROC_TABLE macro for these which always use CPU 0's function pointers. Reviewed-by: Julien Thierry <[email protected]> Signed-off-by: Russell King <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.