Age | Commit message (Collapse) | Author | Files | Lines |
|
The handling of notify->work did not properly maintain notify->kref in two
cases:
1) where the work was already scheduled, another irq_set_affinity_locked()
would get the ref and (no-op-ly) schedule the work. Thus when
irq_affinity_notify() ran, it would drop the original ref but not the
additional one.
2) when cancelling the (old) work in irq_set_affinity_notifier(), if there
was outstanding work a ref had been got for it but was never put.
Fix both by checking the return values of the work handling functions
(schedule_work() for (1) and cancel_work_sync() for (2)) and put the
extra ref if the return value indicates preexisting work.
Fixes: cd7eab44e994 ("genirq: Add IRQ affinity notifiers")
Fixes: 59c39840f5ab ("genirq: Prevent use-after-free and work list corruption")
Signed-off-by: Edward Cree <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Acked-by: Ben Hutchings <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Two fixes for bugs introduced this cycle:
- fix a crash when shutting down a KVM PR guest (our original style
of KVM which doesn't use hypervisor mode)
- fix for the recently added 32-bit KASAN_VMALLOC support
Thanks to: Christophe Leroy, Greg Kurz, Sean Christopherson"
* tag 'powerpc-5.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Fix kernel crash with PR KVM
powerpc/kasan: Fix shadow memory protection with CONFIG_KASAN_VMALLOC
|
|
A stitch in time saves nine.
Signed-off-by: Len Brown <[email protected]>
|
|
Print cpuidle driver and governor.
Originally-by: Antti Laakso <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
In rare cases retransmit logic will make a full skb copy, which will not
trigger the zeroing added in recent change
b738a185beaa ("tcp: ensure skb->dev is NULL before leaving TCP stack").
Cc: Eric Dumazet <[email protected]>
Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue")
Fixes: 28f8bfd1ac94 ("netfilter: Support iif matches in POSTROUTING")
Signed-off-by: Florian Westphal <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Refetch IP header pointer after pskb_may_pull() in flowtable,
from Haishuang Yan.
2) Fix memleak in flowtable offload in nf_flow_table_free(),
from Paul Blakey.
3) Set control.addr_type mask in flowtable offload, from Edward Cree.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull NVMe fixes from Keith:
"Two late nvme fabrics fixes for 5.6: a double free with the rdma
transport, and a regression fix for tcp; please pull."
* 'nvme-5.6-rc6' of git://git.infradead.org/nvme:
nvmet-tcp: set MSG_MORE only if we actually have more to send
nvme-rdma: Avoid double freeing of async event data
|
|
We are incorrectly dropping the raid56 and raid1c34 incompat flags when
there are still raid56 and raid1c34 block groups, not when we do not any
of those anymore. The logic just got unintentionally broken after adding
the support for the raid1c34 modes.
Fix this by clear the flags only if we do not have block groups with the
respective profiles.
Fixes: 9c907446dce3 ("btrfs: drop incompat bit for raid1c34 after last block group is gone")
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Trying to initialize a structure with "= {};" will not always clean out
all padding locations in a structure. So be explicit and call memset to
initialize everything for a number of bpf information structures that
are then copied from userspace, sometimes from smaller memory locations
than the size of the structure.
Reported-by: Daniel Borkmann <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
For the bpf syscall, we are relying on the compiler to properly zero out
the bpf_attr union that we copy userspace data into. Unfortunately that
doesn't always work properly, padding and other oddities might not be
correctly zeroed, and in some tests odd things have been found when the
stack is pre-initialized to other values.
Fix this by explicitly memsetting the structure to 0 before using it.
Reported-by: Maciej Żenczykowski <[email protected]>
Reported-by: John Stultz <[email protected]>
Reported-by: Alexander Potapenko <[email protected]>
Reported-by: Alistair Delva <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Yonghong Song <[email protected]>
Link: https://android-review.googlesource.com/c/kernel/common/+/1235490
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When we send PDU data, we want to optimize the tcp stack
operation if we have more data to send. So when we set MSG_MORE
when:
- We have more fragments coming in the batch, or
- We have a more data to send in this PDU
- We don't have a data digest trailer
- We optimize with the SUCCESS flag and omit the NVMe completion
(used if sq_head pointer update is disabled)
This addresses a regression in QD=1 with SUCCESS flag optimization
as we unconditionally set MSG_MORE when we didn't actually have
more data to send.
Fixes: 70583295388a ("nvmet-tcp: implement C2HData SUCCESS optimization")
Reported-by: Mark Wunderlich <[email protected]>
Tested-by: Mark Wunderlich <[email protected]>
Signed-off-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
Userspace has no way to query if SEV has been disabled with the
sev module parameter of kvm-amd.ko. Actually it has one, but it
is a hack: do ioctl(KVM_MEM_ENCRYPT_OP, NULL) and check if it
returns EFAULT. Make it a little nicer by returning zero for
SEV enabled and NULL argument, and while at it document the
ioctl arguments.
Cc: Brijesh Singh <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The WARN_ON is essentially comparing a user-provided value with 0. It is
trivial to trigger it just by passing garbage to KVM_SET_CLOCK. Guests
can break if you do so, but the same applies to every KVM_SET_* ioctl.
So, if it hurts when you do like this, just do not do it.
Reported-by: [email protected]
Fixes: 9446e6fce0ab ("KVM: x86: fix WARN_ON check of an unsigned less than zero")
Cc: Sean Christopherson <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
As seen in the Vivante kernel driver, most GPUs with the BLT engine have
a broken TS cache flush. The workaround is to temporarily set the BLT
command to CLEAR_IMAGE, without actually executing the clear. Apparently
this state change is enough to trigger the required TS cache flush. As
the BLT engine is completely asychronous, we also need a few more stall
states to synchronize the flush with the frontend.
Root-caused-by: Jonathan Marek <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
|
|
Some Vivante GPUs are found in systems that have interconnects restricted
to 32 address bits, but may have system memory mapped above the 4GB mark.
As this region isn't accessible to the GPU via DMA any GPU memory allocated
in the upper part needs to go through SWIOTLB bounce buffering. This kills
performance if it happens too often, as well as overrunning the available
bounce buffer space, as the GPU buffer may stay mapped for a long time.
Avoid bounce buffering by checking the addressing restrictions. If the
GPU is unable to access memory above the 4GB mark, request our SHM buffers
to be located in the DMA32 zone.
Signed-off-by: Lucas Stach <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix panic() when it occurs during secondary CPU startup
- Fix "kpti=off" when KASLR is enabled
- Fix howler in compat syscall table for vDSO clock_getres() fallback
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: compat: Fix syscall number of compat_clock_getres
arm64: kpti: Fix "kpti=off" when KASLR is enabled
arm64: smp: fix crash_smp_send_stop() behaviour
arm64: smp: fix smp_send_stop() behaviour
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small different driver fixes for 5.6-rc7:
- binderfs fix, yet again
- slimbus new device id added
- hwtracing bugfixes for reported issues and a new device id
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
intel_th: pci: Add Elkhart Lake CPU support
intel_th: Fix user-visible error codes
intel_th: msu: Fix the unexpected state warning
stm class: sys-t: Fix the use of time_after()
slimbus: ngd: add v2.1.0 compatible
binderfs: use refcount for binder control devices too
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO fixes from Greg KH:
"Here are a number of small staging and IIO driver fixes for 5.6-rc7
Nothing major here, just resolutions for some reported problems:
- iio bugfixes for a number of different drivers
- greybus loopback_test fixes
- wfx driver fixes
All of these have been in linux-next with no reported issues"
* tag 'staging-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8188eu: Add device id for MERCUSYS MW150US v2
staging: greybus: loopback_test: fix potential path truncations
staging: greybus: loopback_test: fix potential path truncation
staging: greybus: loopback_test: fix poll-mask build breakage
staging: wfx: fix RCU usage between hif_join() and ieee80211_bss_get_ie()
staging: wfx: fix RCU usage in wfx_join_finalize()
staging: wfx: make warning about pending frame less scary
staging: wfx: fix lines ending with a comma instead of a semicolon
staging: wfx: fix warning about freeing in-use mutex during device unregister
staging/speakup: fix get_word non-space look-ahead
iio: ping: set pa_laser_ping_cfg in of_ping_match
iio: chemical: sps30: fix missing triggered buffer dependency
iio: st_sensors: remap SMO8840 to LIS2DH12
iio: light: vcnl4000: update sampling periods for vcnl4040
iio: light: vcnl4000: update sampling periods for vcnl4200
iio: accel: adxl372: Set iio_chan BE
iio: magnetometer: ak8974: Fix negative raw values in sysfs
iio: trigger: stm32-timer: disable master mode when stopping
iio: adc: stm32-dfsdm: fix sleep in atomic context
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt
driver fix thrown in for good measure as well.
These fixes are:
- new device ids for usb-serial drivers
- thunderbolt error code fix
- xhci driver fixes
- typec fixes
- cdc-acm driver fixes
- chipidea driver fix
- more USB quirks added for devices that need them.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-acm: fix rounding error in TIOCSSERIAL
USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
usb: chipidea: udc: fix sleeping function called from invalid context
USB: serial: pl2303: add device-id for HP LD381
USB: serial: option: add ME910G1 ECM composition 0x110b
usb: host: xhci-plat: add a shutdown
usb: typec: ucsi: displayport: Fix a potential race during registration
usb: typec: ucsi: displayport: Fix NULL pointer dereference
USB: Disable LPM on WD19's Realtek Hub
usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
xhci: Do not open code __print_symbolic() in xhci trace events
thunderbolt: Fix error code in tb_port_is_width_supported()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fixes from Greg KH:
"Here are three small tty_io bugfixes for reported issues that Eric has
resolved for 5.6-rc7
All of these have been in linux-next with no reported issues"
* tag 'tty-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix compat TIOCGSERIAL checking wrong function ptr
tty: fix compat TIOCGSERIAL leaking uninitialized memory
tty: drop outdated comments about release_tty() locking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few fixes covering the issues reported by syzkaller, a couple of
fixes for the MIDI decoding bug, and a few usual HD-audio quirks.
Some of them are about ALSA core stuff, but they are small fixes just
for corner cases, and nothing thrilling"
* tag 'sound-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Enable the headset of Acer N50-600 with ALC662
ALSA: hda/realtek - Enable headset mic of Acer X2660G with ALC662
ALSA: seq: oss: Fix running status after receiving sysex
ALSA: seq: virmidi: Fix running status after receiving sysex
ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks
ALSA: hda/realtek: Fix pop noise on ALC225
ALSA: line6: Fix endless MIDI read loop
ALSA: pcm: oss: Avoid plugin buffer overflow
|
|
Pull drm fixes from Dave Airlie:
"Hope you are well hiding out above the garage. A few amdgpu changes
but nothing too major. I've had a wisdom tooth out this week so
haven't been to on top of things, but all seems good.
core:
- fix lease warning
i915:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
amdgpu:
- Pageflip fix
- VCN clockgating fixes
- GPR debugfs fix for umr
- GPU reset fix
- eDP fix for MBP
- DCN2.x fix
dw-hdmi:
- fix AVI frame colorimetry
komeda:
- fix compiler warning
bochs:
- downgrade a binding failure to a warning"
* tag 'drm-fixes-2020-03-20' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Fix pageflip event race condition for DCN.
drm/amdgpu: fix typo for vcn2.5/jpeg2.5 idle check
drm/amdgpu: fix typo for vcn2/jpeg2 idle check
drm/amdgpu: fix typo for vcn1 idle check
drm/lease: fix WARNING in idr_destroy
drm/i915: Handle all MCR ranges
Revert "drm/i915/tgl: Add extra hdc flush workaround"
drm/i915/execlists: Track active elements during dequeue
drm/bochs: downgrade pci_request_region failure from error to warning
drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017
drm/amdgpu: add fbdev suspend/resume on gpu reset
drm/amd/amdgpu: Fix GPR read from debugfs (v2)
drm/amd/display: fix typos for dcn20_funcs and dcn21_funcs struct
drm/komeda: mark PM functions as __maybe_unused
drm/bridge: dw-hdmi: fix AVI frame colorimetry
|
|
Just like commit 4022e7af86be, this fixes the fact that
IORING_OP_ACCEPT ends up using get_unused_fd_flags(), which checks
current->signal->rlim[] for limits.
Add an extra argument to __sys_accept4_file() that allows us to pass
in the proper nofile limit, and grab it at request prep time.
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Dmitry reports that a test case shows that io_uring isn't honoring a
modified rlimit nofile setting. get_unused_fd_flags() checks the task
signal->rlimi[] for the limits. As this isn't easily inheritable,
provide a __get_unused_fd_flags() that takes the value instead. Then we
can grab it when the request is prepared (from the original task), and
pass that in when we do the async part part of the open.
Reported-by: Dmitry Kadashev <[email protected]>
Tested-by: Dmitry Kadashev <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
RLCG is enabled by host driver, no need to enable it in guest for none-PSP load path
Signed-off-by: shaoyunl <[email protected]>
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
MMHub EDC becomes dirty after BACO reset
EDC registers should be cleared early on in reset phase
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: John Clements <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The GMU has very few memory allocations and uses a flat memory space so
there is no good reason to go out of our way to bypass the DMA APIs which
were basically designed for this exact scenario.
v7: Check return value of dma_set_mask_and_coherent
v4: Use dma_alloc_wc()
v3: Set the dma mask correctly and use dma_addr_t for the iova type
v2: Pass force_dma false to of_dma_configure to require that the DMA
region be set up and return error from of_dma_configure to fail probe.
Reviewed-by: Michael J. Ruhl <[email protected]>
Signed-off-by: Jordan Crouse <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
Convert display/msm/gmu.txt to display/msm/gmu.yaml and remove the old
text bindings. The 'sram' text from the old binding never applied to
the GMU so it was not converted but all the other properties were correct.
Acked-by: Sam Ravnborg <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Jordan Crouse <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
|
|
On running several back to back perf capture sessions involving closing
and opening the perf stream, invalid OA reports are seen in the
beginning of the OA buffer in some sessions. Fix this by invalidating OA
TLB when the perf stream is closed or disabled on gen12.
Signed-off-by: Umesh Nerlige Ramappa <[email protected]>
Reviewed-by: Lionel Landwerlin <[email protected]>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Lionel Landwerlin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a639b0c15065df930467695b76ef38d5edaed049)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Beware that the context may already be closed as we try to lookup an
engine.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1389
Fixes: 130a95e9098e ("drm/i915/gem: Consolidate ctx->engines[] release")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Tvrtko Ursulin <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Reviewed-by: Tvrtko Ursulin <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a22f34783476a39d157b60485285aaa43554cb2d)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
The residual w/a batch is causing system instablity on Ivybridge and
Baytrail under some workloads, so disable until resolved.
Closes: https://gitlab.freedesktop.org/drm/intel/issues/1405
Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts")
Signed-off-by: Chris Wilson <[email protected]>
Cc: Mika Kuoppala <[email protected]>
Cc: Prathap Kumar Valsan <[email protected]>
Cc: Akeem G Abodunrin <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Joonas Lahtinen <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Acked-by: Mika Kuoppala <[email protected]>
Reviewed-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
(cherry picked from commit a62774782b994026ac3198bf115717d55d536166)
Signed-off-by: Rodrigo Vivi <[email protected]>
|
|
Building an arm64 defconfig with clang's integrated assembler, this error
occurs:
<instantiation>:2:2: error: unrecognized instruction mnemonic
_ASM_EXTABLE 9999b, 9f
^
arch/arm64/mm/cache.S:50:1: note: while in macro instantiation
user_alt 9f, "dc cvau, x4", "dc civac, x4", 0
^
While GNU as seems fine with case-sensitive macro instantiations, clang
doesn't, so use the actual macro name (_asm_extable) as in the rest of
the file.
Also checked that the generated assembly matches the GCC output.
Reviewed-by: Nick Desaulniers <[email protected]>
Tested-by: Nick Desaulniers <[email protected]>
Fixes: 290622efc76e ("arm64: fix "dc cvau" cache operation on errata-affected core")
Link: https://github.com/ClangBuiltLinux/linux/issues/924
Signed-off-by: Ilie Halip <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
skb->rbnode is sharing three skb fields : next, prev, dev
When a packet is sent, TCP keeps the original skb (master)
in a rtx queue, which was converted to rbtree a while back.
__tcp_transmit_skb() is responsible to clone the master skb,
and add the TCP header to the clone before sending it
to network layer.
skb_clone() already clears skb->next and skb->prev, but copies
the master oskb->dev into the clone.
We need to clear skb->dev, otherwise lower layers could interpret
the value as a pointer to a netdev.
This old bug surfaced recently when commit 28f8bfd1ac94
("netfilter: Support iif matches in POSTROUTING") was merged.
Before this netfilter commit, skb->dev value was ignored and
changed before reaching dev_queue_xmit()
Fixes: 75c119afe14f ("tcp: implement rb-tree based retransmit queue")
Fixes: 28f8bfd1ac94 ("netfilter: Support iif matches in POSTROUTING")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Martin Zaharinov <[email protected]>
Cc: Florian Westphal <[email protected]>
Cc: Pablo Neira Ayuso <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
warning: `turbostat' uses 32-bit capabilities (legacy support in use)
Signed-off-by: Len Brown <[email protected]>
|
|
Some Chromebook BIOS' do not export an ACPI LPIT, which is how
Linux finds the residency counter for CPU and SYSTEM low power states,
that is exports in /sys/devices/system/cpu/cpuidle/*residency_us
When these sysfs attributes are missing, check the debugfs attrubte
from the pmc_core driver, which accesses the same counter value.
Signed-off-by: Len Brown <[email protected]>
|
|
From a turbostat point of view the Tremont-based Elkhart Lake
is very similar to Goldmont, reuse the code of Goldmont.
Elkhart Lake does not support 'group turbo limit counter'
nor C3, adjust the code accordingly.
Signed-off-by: Chen Yu <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
Jasper Lake, like Elkhart Lake, uses a Tremont CPU.
So reuse the code.
Signed-off-by: Chen Yu <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
From a turbostat point of view, Ice Lake server looks like Sky Lake server.
Signed-off-by: Chen Yu <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
From a turbostat point of view, Tiger Lake looks like Ice Lake.
Signed-off-by: Chen Yu <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
Warning: ‘__builtin_strncpy’ specified bound 20 equals destination size
[-Wstringop-truncation]
reduce param to strncpy, to guarantee that a null byte is always copied
into destination buffer.
Signed-off-by: Len Brown <[email protected]>
|
|
From a turbostat point of view, Cometlake is like Kabylake.
Suggested-by: Rui Zhang <[email protected]>
Signed-off-by: Chen Yu <[email protected]>
Signed-off-by: Len Brown <[email protected]>
|
|
Driver reclaims descriptors in much smaller batches, even if hardware
indicates more to reclaim, during backpressure. So, fix the check to
restart the Txq during backpressure, by looking at how many
descriptors hardware had indicated to reclaim, and not on how many
descriptors that driver had actually reclaimed. Once the Txq is
restarted, driver will reclaim even more descriptors when Tx path
is entered again.
Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
commit 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page")
reverted back to getting Tx CIDX updates via DMA, instead of interrupts,
introduced by commit d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE
doorbell queue timer")
However, it missed reverting back several code changes where Tx CIDX
updates are not explicitly requested during backpressure when using
interrupt mode. These missed changes cause slow recovery during
backpressure because the corresponding interrupt no longer comes and
hence results in Tx throughput drop.
So, revert back these missed code changes, as well, which will allow
explicitly requesting Tx CIDX updates when backpressure happens.
This enables the corresponding interrupt with Tx CIDX update message
to get generated and hence speed up recovery and restore back
throughput.
Fixes: 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page")
Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer")
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Andrew reported:
After a number of network port link up/down changes, sometimes the switch
port gets stuck in a state where it thinks it is still transmitting packets
but the cpu port is not actually transmitting anymore. In this state you
will see a message on the console
"mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter
in ifconfig will be incrementing on virtual port, but not incrementing on
cpu port.
The issue is that MAC TX/RX status has no impact on the link status or
queue manager of the switch. So the queue manager just queues up packets
of a disabled port and sends out pause frames when the queue is full.
Change the LINK bit to reflect the link status.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Reported-by: Andrew Smith <[email protected]>
Signed-off-by: René van Dorst <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Prior, passing in chunks of 2, 3, or 4, followed by any additional
chunks would result in the chacha state counter getting out of sync,
resulting in incorrect encryption/decryption, which is a pretty nasty
crypto vuln: "why do images look weird on webpages?" WireGuard users
never experienced this prior, because we have always, out of tree, used
a different crypto library, until the recent Frankenzinc addition. This
commit fixes the issue by advancing the pointers and state counter by
the actual size processed. It also fixes up a bug in the (optional,
costly) stride test that prevented it from running on arm64.
Fixes: b3aad5bad26a ("crypto: arm64/chacha - expose arm64 ChaCha routine as library function")
Reported-and-tested-by: Emil Renner Berthing <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Cc: [email protected] # v5.5+
Signed-off-by: Jason A. Donenfeld <[email protected]>
Reviewed-by: Eric Biggers <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc, afs: Interruptibility fixes
Here are a number of fixes for AF_RXRPC and AFS that make AFS system calls
less interruptible and so less likely to leave the filesystem in an
uncertain state. There's also a miscellaneous patch to make tracing
consistent.
(1) Firstly, abstract out the Tx space calculation in sendmsg. Much the
same code is replicated in a number of places that subsequent patches
are going to alter, including adding another copy.
(2) Fix Tx interruptibility by allowing a kernel service, such as AFS, to
request that a call be interruptible only when waiting for a call slot
to become available (ie. the call has not taken place yet) or that a
call be not interruptible at all (e.g. when we want to do writeback
and don't want a signal interrupting a VM-induced writeback).
(3) Increase the minimum delay on MSG_WAITALL for userspace sendmsg() when
waiting for Tx buffer space as a 2*RTT delay is really small over 10G
ethernet and a 1 jiffy timeout might be essentially 0 if at the end of
the jiffy period.
(4) Fix some tracing output in AFS to make it consistent with rxrpc.
(5) Make sure aborted asynchronous AFS operations are tidied up properly
so we don't end up with stuck rxrpc calls.
(6) Make AFS client calls uninterruptible in the Rx phase. If we don't
wait for the reply to be fully gathered, we can't update the local VFS
state and we end up in an indeterminate state with respect to the
server.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
During initialization the driver issues a software reset command and
then waits for the system status to change back to "ready" state.
However, before issuing the reset command the driver does not check that
the system is actually in "ready" state. On Spectrum-{1,2} systems this
was always the case as the hardware initialization time is very short.
On Spectrum-3 systems this is no longer the case. This results in the
software reset command timing-out and the driver failing to load:
[ 6.347591] mlxsw_spectrum3 0000:06:00.0: Cmd exec timed-out (opcode=40(ACCESS_REG),opcode_mod=0,in_mod=0)
[ 6.358382] mlxsw_spectrum3 0000:06:00.0: Reg cmd access failed (reg_id=9023(mrsr),type=write)
[ 6.368028] mlxsw_spectrum3 0000:06:00.0: cannot register bus device
[ 6.375274] mlxsw_spectrum3: probe of 0000:06:00.0 failed with error -110
Fix this by waiting for the system to become ready both before issuing
the reset command and afterwards. In case of failure, print the last
system status to aid in debugging.
Fixes: da382875c616 ("mlxsw: spectrum: Extend to support Spectrum-3 ASIC")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
https://github.com/ckhu-mediatek/linux.git-tags into drm-next
Mediatek DRM Next for Linux 5.7
This include MT8183 DPI support.
Signed-off-by: Dave Airlie <[email protected]>
From: CK Hu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/1584580683.29614.5.camel@mtksdaap41
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
amd-drm-next-5.7-2020-03-19:
amdgpu:
- SR-IOV fixes
- RAS fixes
- Fallthrough cleanups
- Kconfig fix for ACP
- Fix load balancing with VCN
- DC fixes
- GPU reset fixes
- Various cleanups
scheduler:
- Revert job distribution optimization
- Add a helper to pick the least loaded scheduler
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.6-rc7:
- Track active elements during dequeue
- Fix failure to handle all MCR ranges
- Revert unnecessary workaround
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|