aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-08-08V4L/DVB: IR: replace spinlock with mutexMaxim Levitsky1-14/+14
Some handlers (lirc for example) allocates memory on initialization, doing so in atomic context is cumbersome. Fixes warning about sleeping function in atomic context. Signed-off-by: Maxim Levitsky <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: IR: minor fixesMaxim Levitsky3-9/+12
* lirc: Don't propagate reset event to userspace * lirc: Remove strange logic from lirc that would make first sample always be pulse * Make TO_US macro actualy print what it should. Signed-off-by: Maxim Levitsky <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: IR: Kconfig fixesMaxim Levitsky1-3/+7
Move IR drives below separate menu. This allows to disable them. Also correct a typo. Signed-off-by: Maxim Levitsky <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: IR: put newly ported streamzap driver in proper homeJarod Wilson5-7/+13
Moves drivers/staging/lirc/lirc_streamzap.c to drivers/media/IR/streamzap.c, along with making the requisite Kconfig and Makefile changes. Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: staging/lirc: port lirc_streamzap to ir-coreJarod Wilson4-446/+449
This ports lirc_streamzap.c over to ir-core in-place, to be followed by a patch moving the driver over to drivers/media/IR/streamzap.c and enabling the proper Kconfig bits. Presently, the in-kernel keymap doesn't work, as the stock Streamzap remote uses an RC-5-like, but not-quite-RC-5 protocol, which the in-kernel RC-5 decoder doesn't cope with. The remote can be used right now with the lirc bridge driver though, and other remotes (at least an RC-6(A) MCE remote) work perfectly with the driver. I'll take a look at making the existing RC-5 decoder cope with this odd duck, possibly implement another standalone decoder engine, or just throw up my hands and say "meh, use lirc"... But the driver itself should be perfectly sound. Remaining items on the streamzap TODO list: - add LIRC_SET_REC_TIMEOUT-alike support - add LIRC_GET_M{AX,IN}_TIMEOUT-alike support - add LIRC_GET_REC_RESOLUTION-alike support All of the above should be trivial to add. There are patches pending to add this support to ir-core from Maxim Levitsky, and I'll take care of these once his patches get integrated. None of them are currently essential though. Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: IR/mceusb: less generic callback name and remove cruftJarod Wilson1-4/+2
Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: staging/lirc: fix non-CONFIG_MODULES build horkageJarod Wilson2-5/+8
Fix when CONFIG_MODULES is not enabled: drivers/staging/lirc/lirc_parallel.c:243: error: implicit declaration of function 'module_refcount' drivers/staging/lirc/lirc_it87.c:150: error: implicit declaration of function 'module_refcount' drivers/built-in.o: In function `it87_probe': lirc_it87.c:(.text+0x4079b0): undefined reference to `init_chrdev' lirc_it87.c:(.text+0x4079cc): undefined reference to `drop_chrdev' drivers/built-in.o: In function `lirc_it87_exit': lirc_it87.c:(.exit.text+0x38a5): undefined reference to `drop_chrdev' Its a quick hack and untested beyond building, since I don't have the hardware, but it should do the trick. Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: staging/lirc: fix Kconfig dependenciesJanne Grunau1-9/+10
Signed-off-by: Janne Grunau <[email protected]> Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: IR/mceusb: remove bad ir_input_dev useJarod Wilson1-14/+1
The ir_input_dev gets filled in by __ir_input_register, the one allocated in mceusb_init_input_dev was being overwritten by the correct one shortly after it was initialized (ultimately resulting in a memory leak). This bug was inherited from imon.c, and was pointed out to me by Maxim Levitsky. v2: fix incorrect dev arg to dev_dbg Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: IR/imon: remove bad ir_input_dev useJarod Wilson1-15/+0
The ir_input_dev gets filled in by __ir_input_register, the one allocated in imon_init_idev was being overwritten by the correct one shortly after it was initialized (ultimately resulting in a memory leak). Additionally, there was an ill-advised memcpy into that extraneous ir_input_dev which gets fixed by this. Ill-advised memcpy pointed out by Dmitry Torokhov, bad usage of ir_input_dev pointed out by Maxim Levitsky. Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: IR/imon: remove incorrect calls to input_free_deviceJarod Wilson1-4/+1
Per Dmitry Torokhov, following input_unregister_device with an input_free_device is forbidden, the former is sufficient alone. Acked-by: Dmitry Torokhov <[email protected]> Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: v4l2_subdev: Get rid of now unused IR pulse width definesAndy Walls2-8/+3
Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885, cx25840: Change IR measurment records to use struct ↵Andy Walls3-71/+91
ir_raw_event The CX23885 and CX25840 modules were using their own simple IR pulse width measurement record type which required conversion when passing to the new IR core. This change makes that record type consistent with the new IR core and removes a data conversion. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885, cx25840: Report the actual length of an IR Rx timeout eventAndy Walls3-18/+16
Instead of reporting an IR Rx timeout event as a ridiculously long space, report it as a space of the lenght of the timeout. This partially fixes operation with LIRC without breaking interoperation with the in kernel decoders. The gaps lengths reported to LIRC are still not real however. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885, cx25840: Report IR max pulse width regardless of mod/demod useAndy Walls2-24/+28
Compute and report the maximum IR pulse measurment width, even if we are set to perform carrier modulation or demodulation and the number is fixed by the carrier freq. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Change Kconfig dependencies to new IR_CORE functionsAndy Walls1-1/+1
This driver no longer depends on the old IR functions selected by VIDEO_IR. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Require user to explicitly enable CX2388[57] IR via module ↵Andy Walls1-2/+19
param The CX23885 IR controller was reported to cause an interrupt storm on a TeVii S470 card, but was reported fine on an HVR-1250. Keep integrated IR disabled by default on CX2388[57] based cards to avoid a bad user experience in the general case. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Move AV Core irq handling to a work handlerAndy Walls6-15/+97
Interrupts from the AV Core are best handled by a workqueue handler since many I2C transactions are required to service the AV Core interrupt. The AV_CORE PCI interrupt is disabled by the IRQ handler and reenabled when the work handler is finished. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Protect PCI interrupt mask manipulations with a spinlockAndy Walls5-22/+103
This patch encapsulates access to the PCI_INT_MSK register and dev->pci_irqmask variable and protects them with a spinlock. This is needed because both the hard IRQ handler and a workhandler will need to manipulate the mask to disable the AV_CORE interrupt. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Add preliminary IR Rx support for the HVR-1250 and TeVii S470Andy Walls4-10/+111
Add initial IR Rx support using the intergrated IR controller in the A/V core of the CX23885 bridge chip. This initial support is flawed in that I2C transactions should not be performed in a hard irq context. That will be fixed in a follow on patch. The TeVii S470 support is reported to generate perptual interrupts that renders a user' system nearly unusable. The TeVii S470 IR will be disabled by default in a follow on patch. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Add a v4l2_subdev group id for the CX2388[578] integrated ↵Andy Walls2-2/+6
AV core Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx25840: Add support for CX2388[57] A/V core integrated IR controllersAndy Walls4-1/+1419
This patch is primarily a port of the integrated IR controller code in cx23885/cx23888-ir.c. Right now, only the CX2388[57] AV core will really try to set up IR. This IR support, by design, still requires the bridge driver to do final IO pin mux configuration and setup of the IR controller parameters. For the CX2388[578] chips, enabling the AV Core for IR also starts sending Audio and Video interrupts to the bridge driver. For CX2388[578] chips audio and video interrupts are ignored and acknowledged when they happen. IR interrupt handling and status logging is exluded for the CX23888 which does not have an IR controller on the AV core. Note that experimentation reveals that the IR irq enables on the CX23885 have an inverted logic sense. The CX23887 likely suffers from the same quirk. For these chips, those irq enable bits are handled as interrupt disables. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: v4l2_subdev: Move interrupt_service_routine ptr to v4l2_subdev_core_opsAndy Walls3-12/+9
The CX2584x and related cores are multifunction subdevices with a number of internal blocks that act as interrupt sources. Move the v4L2_subdev interrupt_service_routine callback from v4l_subdev_ir_ops to v4l2_subdev_core_ops, as the video and audio blocks of a CX2584x and related cores can generate interrupts along with the IR block. This change also makes sense for other subdev's that generate interrupts and do not have an IR block. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: For CX23888 IR, configure the IO pin mux IR pins explcitlyAndy Walls1-0/+31
Explicitly configure the IR Tx and IR Rx pins to be driven by the IR Rx and Tx pads from the AV core for CX23888 IR. For the HVR-1850 and HVR-1290 configure the IR Tx level inversion, so the Tx LED is off when idle. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: v4l2_subdev, cx23885: Differentiate IR carrier sense and I/O pin ↵Andy Walls3-10/+29
inversion There is a distinction on IR Tx for the CX2388[578] chips of carrier sense inversion (space is a carrier burst and mark is no burst) and I/O pin level inversion (0 is high output level, 1 is low output level). Allow the caller to set these parameters distinctly as v4l2_subdevice IR parameters. This permits the IR device to be configured and enabled without the IR Tx LED being on during idle/space time due to an external hardware level inversion Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx25840: Add s_io_pin_config core subdev ops for the CX2388[578]Andy Walls2-0/+228
Add s_io_pin_config core subdev op for the CX2388[578] AV cores. This is complete for IR_RX, IR_TX, GPIOs 16,19-23, and IRQ_N. It likely needs work for the I2S signal direction. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: v4l2_subdev: Add s_io_pin_config to v4l2_subdev_core_opsAndy Walls1-0/+23
Add a method to v4l2_sudev_core_ops to allow bridge drivers to manage what signal pads/functions are routed out to multiplexed IO pins on a pin by pin basis. The interface also allows specifying initial output settings for pins and disabling an IO pin altogether. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Add a VIDIOC_LOG_STATUS ioctl function for analog video ↵Andy Walls1-0/+16
devices Add a simple log_status function for raw analog video capture device nodes, to provide insight into the state of the CX2388[578] A/V decoder core. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Add correct detection of the HVR-1250 model 79501Andy Walls1-0/+10
The offset in the eeprom data for the 79501 version of the HVR-1250 is at 0xc0 vs. the standard 0x80. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx25840: Make cx25840 i2c register read transactions atomicAndy Walls1-19/+39
There was a small window between writing the cx25840 register address over the i2c bus and reading the register contents back from the cx25840 device that the i2c adapter lock was released. This change ensures the adapter lock is not released until the register read is done. Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: i2c_wait_done returns 0 or 1, don't check for < 0 return valueJean Delvare1-12/+3
Function i2c_wait_done() never returns negative values, so there is no point in checking for them. Signed-off-by: Jean Delvare <[email protected]> Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Check for slave nack on all transactionsJean Delvare1-0/+8
Don't just check for nacks on zero-length transactions. Check on other transactions too. Signed-off-by: Jean Delvare <[email protected]> Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: cx23885: Return -ENXIO on slave nackJean Delvare1-2/+2
Documentation/i2c/fault-codes says that i2c adapter drivers should return -ENXIO when no slave acks an address byte. Signed-off-by: Jean Delvare <[email protected]> Signed-off-by: Andy Walls <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - vc032x: Force main register write at probe time (poxxxx)Jean-François Moine1-1/+1
On laptops, the webcam sometimes disconnects when writing the first main register (b300). This patch prevents the creation of a new /dev/video<n> on streaming start. Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - vc032x: Do sensor probe at resume timeJean-François Moine1-28/+32
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - vc032x: Add more controls for poxxxxJean-François Moine1-34/+272
The added controls are exposure, gain, autogain and backlight compensation. Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - sq930x: Cleanup source, add commentsJean-François Moine1-5/+7
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - sq930x: Change the horizontal blanking of sensor mt9v111Jean-François Moine1-1/+2
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - sq930x: Change image format to Bayer modeJean-François Moine1-256/+56
The JPEG format did not work fine. The Bayer format offers correct VGA (640x480) resolution, but bad QQVGA (160x120). This last resolution is removed. Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - sq930x: Change the default values of gain and exposureJean-François Moine1-2/+2
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - sq930x: Change the gain value for Micron sensorsJean-François Moine1-1/+1
The bit 7 of the sensor gain register multiplies the 7bits value by two. It is now always set with half the user gain value. Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - sq930x: Bad init sequence for sensor mt9v111Jean-François Moine1-1/+1
The start_1 exchange must be done by (reg, val) * 5 and not 8. Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - main: Version changeJean-François Moine1-1/+1
Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08V4L/DVB: gspca - sonixj / sq930x / t613: Remove unused variable in struct sdJean-François Moine3-14/+12
The sensor enum definition was not at the right place. Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-08-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tileLinus Torvalds210-21/+39334
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/tile: check kmalloc() result arch/tile: catch up on various minor cleanups. arch/tile: avoid erroneous error return for PTRACE_POKEUSR. tile: set ARCH_KMALLOC_MINALIGN tile: remove homegrown L1_CACHE_ALIGN macro arch/tile: Miscellaneous cleanup changes. arch/tile: Split the icache flush code off to a generic <arch> header. arch/tile: Fix bug in support for atomic64_xx() ops. arch/tile: Shrink the tile-opcode files considerably. arch/tile: Add driver to enable access to the user dynamic network. arch/tile: Enable more sophisticated IRQ model for 32-bit chips. Move list types from <linux/list.h> to <linux/types.h>. Add wait4() back to the set of <asm-generic/unistd.h> syscalls. Revert adding some arch-specific signal syscalls to <linux/syscalls.h>. arch/tile: Do not use GFP_KERNEL for dma_alloc_coherent(). Feedback from [email protected]. arch/tile: core support for Tilera 32-bit chips. Fix up the "generic" unistd.h ABI to be more useful.
2010-08-08Merge branch 'for-linus' of git://www.jni.nu/crisLinus Torvalds54-742/+857
* 'for-linus' of git://www.jni.nu/cris: (51 commits) CRIS: Fix alignment problem for older ld CRIS: Always dump registers for segfaulting process. CRIS: Add config for pausing a seg-faulting process CRIS: Don't take faults while in_atomic CRIS: Fixup lookup for delay slot faults CRIS: Discard exit.text and .data at runtime CRIS: Add cache aligned and read mostly data sections CRIS: Return something from profile write CRIS: Add ARTPEC-3 and timestamps for sync-serial CRIS: Better ARTPEC-3 support for gpio CRIS: Add include guard CRIS: Better handling of pinmux settings CRIS: New DMA defines for ARTPEC-3 CRIS: __do_strncpy_from_user: Don't read the byte beyond the nil CRIS: Pagetable for ARTPEC-3 CRIS: Machine dependent memmap.h CRIS: Check if pointer is set before using it CRIS: Machine dependent dma.h CRIS: Define __read_mostly for CRISv32 CRIS: Discard .note.gnu.build-id section ...
2010-08-08Merge branch 'for-linus' of git://android.kernel.org/kernel/tegraLinus Torvalds42-5/+6061
* 'for-linus' of git://android.kernel.org/kernel/tegra: [ARM] tegra: add MAINTAINERS entry [ARM] tegra: harmony: Add harmony board file [ARM] tegra: add pinmux support [ARM] tegra: add GPIO support [ARM] tegra: Add timer support [ARM] tegra: SMP support [ARM] tegra: Add clock support [ARM] tegra: Add IRQ support [ARM] tegra: initial tegra support
2010-08-08Merge branch 'for-linus' of git://github.com/schandinat/linux-2.6Linus Torvalds12-902/+449
* 'for-linus' of git://github.com/schandinat/linux-2.6: drivers/video/via/via-gpio.c: fix warning viafb: Depends on X86 fbdev: section cleanup in viafb driver viafb: fix accel_flags check_var bug viafb: probe cleanups viafb: remove ioctls which break the framebuffer interface viafb: update fix before calculating depth viafb: PLL value cleanup viafb: simplify lcd size "detection" viafb: fix PCI table viafb: add lcd scaling support for some IGPs viafb: improve lcd code readability viafb: remove duplicated scaling code MAINTAINERS: update viafb entry
2010-08-08Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linuxLinus Torvalds18-586/+1265
* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux: (64 commits) OMAP: DSS2: OMAPFB: add support for FBIO_WAITFORVSYNC OMAP: DSS2: Replace strncmp() with sysfs_streq() in overlay_manager_store() OMAP: DSS2: Fix error path in omap_dsi_update() OMAP: DSS2: TDO35S: fix video signaling OMAP: DSS2: OMAPFB: Fix invalid bpp for PAL and NTSC modes OMAP: DSS2: OMAPFB: Fix probe error path OMAP3EVM: Replace vdvi regulator supply with vdds_dsi OMAP: DSS2: Remove extra return statement OMAP: DSS2: adjust YUV overlay width to be even OMAP: DSS2: OMAPFB: Fix sysfs mirror input check OMAP: DSS2: OMAPFB: Remove redundant color register range check OMAP: DSS2: OMAPFB: Remove redundant rotate range check OMAP: DSS2: OMAPFB: Check fb2display() return value OMAP: DSS2: Taal: Optimize enable_te, rotate, mirror when value unchanged OMAP: DSS2: DSI: detect unsupported update requests OMAP: DSS2: DSI: increase FIFO low threshold OMAP: DSS2: DSI: Add error IRQ mask for DSI complexIO OMAP: DSS2: DSI: Remove BTA after set_max_rx_packet_size OMAP: DSS2: change manual update scaling setup OMAP: DSS2: DSI: use BTA to end the frame transfer ...
2010-08-08Merge branch 'omap-for-linus' of ↵Linus Torvalds154-6534/+6420
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (143 commits) omap: mailbox: reorganize headers omap: mailbox: standarize on 'omap-mailbox' omap: mailbox: only compile for configured archs omap: mailbox: simplify omap_mbox_register() omap: mailbox: reorganize registering omap: mailbox: add IRQ names omap: mailbox: remove unecessary fields omap: mailbox: don't export unecessary symbols omap: mailbox: update omap1 probing omap: mailbox: use correct config for omap1 omap: mailbox: 2420 should be detected at run-time omap: mailbox: reorganize structures omap: mailbox: trivial cleanups omap mailbox: Set a device in logical mbox instance for traceability omap: mailbox: convert block api to kfifo omap: mailbox: remove (un)likely macros from cold paths omap: mailbox cleanup: split MODULE_AUTHOR line omap: mailbox: convert rwlocks to spinlock Mailbox: disable mailbox interrupt when request queue Mailbox: new mutext lock for h/w mailbox configuration ...
Powered by cgit, Gruvboxed by Blaster4385.