aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-12-16drm/tegra: submit: Remove pm_runtime_enabled() checksDmitry Osipenko1-10/+6
Runtime PM is now universally available, make it mandatory by removing the pm_runtime_enabled() checks. Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: nvdec: Stop channel on suspendDmitry Osipenko1-11/+18
CDMA must be stopped before hardware is suspended. Add channel stopping to RPM suspend callback. Add system level suspend-resume callbacks. Runtime PM initialization is moved to host1x client init phase because RPM callback now uses host1x channel that is available only when host1x client is registered. Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: vic: Stop channel on suspendDmitry Osipenko1-18/+18
CDMA must be stopped before hardware is suspended. Add channel stopping to RPM suspend callback. Add system level suspend-resume callbacks. Runtime PM initialization is moved to host1x client init phase because RPM callback now uses host1x channel that is available only when host1x client is registered. Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: gr3d: Support generic power domain and runtime PMDmitry Osipenko1-58/+305
Add runtime power management and support generic power domains. Reviewed-by: Ulf Hansson <[email protected]> Tested-by: Peter Geis <[email protected]> # Ouya T30 Tested-by: Paul Fertser <[email protected]> # PAZ00 T20 Tested-by: Nicolas Chauvet <[email protected]> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <[email protected]> # Ouya T30 Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: gr2d: Support generic power domain and runtime PMDmitry Osipenko1-36/+148
Add runtime power management and support generic power domains. Reviewed-by: Ulf Hansson <[email protected]> Tested-by: Peter Geis <[email protected]> # Ouya T30 Tested-by: Paul Fertser <[email protected]> # PAZ00 T20 Tested-by: Nicolas Chauvet <[email protected]> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <[email protected]> # Ouya T30 Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: hdmi: Add OPP supportDmitry Osipenko1-4/+11
The HDMI on Tegra belongs to the core power domain and we're going to enable GENPD support for the core domain. Now HDMI driver must use OPP API for driving the controller's clock rate because OPP API takes care of reconfiguring the domain's performance state based on HDMI clock rate. Add OPP support to the HDMI driver. Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: dc: Support OPP and SoC core voltage scalingDmitry Osipenko2-0/+81
Add OPP and SoC core voltage scaling support to the display controller driver. This is required for enabling system-wide DVFS on pre-Tegra186 SoCs. Reviewed-by: Ulf Hansson <[email protected]> Tested-by: Peter Geis <[email protected]> # Ouya T30 Tested-by: Paul Fertser <[email protected]> # PAZ00 T20 Tested-by: Nicolas Chauvet <[email protected]> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <[email protected]> # Ouya T30 Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: submit: Add missing pm_runtime_mark_last_busy()Dmitry Osipenko1-1/+3
Runtime PM auto-suspension doesn't work without pm_runtime_mark_last_busy(), add it. Cc: <[email protected]> Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16gpu: host1x: Add host1x_channel_stop()Dmitry Osipenko2-0/+9
Add host1x_channel_stop() which waits till channel becomes idle and then stops the channel hardware. This is needed for supporting suspend/resume by host1x drivers since the hardware state is lost after power-gating, thus the channel needs to be stopped before client enters into suspend. Tested-by: Peter Geis <[email protected]> # Ouya T30 Tested-by: Paul Fertser <[email protected]> # PAZ00 T20 Tested-by: Nicolas Chauvet <[email protected]> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <[email protected]> # Ouya T30 Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16gpu: host1x: Add initial runtime PM and OPP supportDmitry Osipenko6-56/+164
Add runtime PM and OPP support to the Host1x driver. For the starter we will keep host1x always-on because dynamic power management require a major refactoring of the driver code since lot's of code paths are missing the RPM handling and we're going to remove some of these paths in the future. Reviewed-by: Ulf Hansson <[email protected]> Tested-by: Peter Geis <[email protected]> # Ouya T30 Tested-by: Paul Fertser <[email protected]> # PAZ00 T20 Tested-by: Nicolas Chauvet <[email protected]> # PAZ00 T20 and TK1 T124 Tested-by: Matt Merhar <[email protected]> # Ouya T30 Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: vic: Handle tegra_drm_alloc() failureThierry Reding1-0/+2
This function can return one of several errors in an ERR_PTR()-encoded pointer, so make sure to propogate those on failure. Suggested-by: Robin Murphy <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16gpu: host1x: Add missing DMA API includeRobin Murphy1-0/+1
Host1x seems to be relying on picking up dma-mapping.h transitively from iova.h, which has no reason to include it in the first place. Fix the former issue before we totally break things by fixing the latter one. CC: Thierry Reding <[email protected]> CC: Mikko Perttunen <[email protected]> CC: [email protected] Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: vic: Fix DMA API misuseRobin Murphy1-4/+3
Upon failure, dma_alloc_coherent() returns NULL. If that does happen, passing some uninitialised stack contents to dma_mapping_error() - which belongs to a different API in the first place - has precious little chance of detecting it. Also include the correct header, because the fragile transitive inclusion currently providing it is going to break soon. Fixes: 20e7dce255e9 ("drm/tegra: Remove memory allocation from Falcon library") CC: Thierry Reding <[email protected]> CC: Mikko Perttunen <[email protected]> CC: [email protected] Signed-off-by: Robin Murphy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: hdmi: Register audio CODEC on Tegra20Dmitry Osipenko2-11/+145
Tegra20 SoC supports only S/PDIF source for HDMI audio. Register ASoC HDMI S/PDIF CODEC for Tegra20, it will be linked with the S/PDIF CPU DAI. Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: hdmi: Unwind tegra_hdmi_init() errorsDmitry Osipenko1-3/+12
Add missing error unwinding to tegra_hdmi_init(), for consistency. Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Mark nvdec PM functions as __maybe_unusedArnd Bergmann1-2/+2
The resume helper is called conditionally and causes a harmless warning when stubbed out: drivers/gpu/drm/tegra/nvdec.c:240:12: error: 'nvdec_runtime_resume' defined but not used [-Werror=unused-function] 240 | static int nvdec_runtime_resume(struct device *dev) Mark both suspend and resume as __maybe_unused for consistency to avoid this warning. Fixes: e76599df354d ("drm/tegra: Add NVDEC driver") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Mark nvdec_writel() as inlineArnd Bergmann1-1/+2
Without CONFIG_IOMMU_API, the nvdec_writel() function is unused, causing a warning: drivers/gpu/drm/tegra/nvdec.c:48:13: error: 'nvdec_writel' defined but not used [-Werror=unused-function] 48 | static void nvdec_writel(struct nvdec *nvdec, u32 value, unsigned int offset) | ^~~~~~~~~~~~ As this is a trivial wrapper around an inline function, mark it as inline itself, which avoids the warning as well. Fixes: e76599df354d ("drm/tegra: Add NVDEC driver") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: dc: rgb: Allow changing PLLD rate on Tegra30+Dmitry Osipenko3-12/+65
Asus Transformer TF700T is a Tegra30 tablet device which uses RGB->DSI bridge that requires a precise clock rate in order to operate properly. Tegra30 has a dedicated PLL for each display controller, hence the PLL rate can be changed freely. Allow PLL rate changes on Tegra30+ for RGB output. Configure the clock rate before display controller is enabled since DC itself may be running off this PLL and it's not okay to change the rate of the active PLL that doesn't support dynamic frequency switching since hardware will hang. Tested-by: Maxim Schwalm <[email protected]> #TF700T Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Remove duplicate struct declarationWan Jiabing1-1/+0
struct tegra_dc is declared at 13rd line. The declaration here is unnecessary. Remove it. Signed-off-by: Wan Jiabing <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: vic: Use autosuspendMikko Perttunen1-0/+2
When going idle, it's not unlikely that more work will follow. As such, use autosuspend with a 500ms suspend delay. Signed-off-by: Mikko Perttunen <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: gr2d: Explicitly control module resetThierry Reding1-2/+31
As of commit 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks"), module resets are no longer automatically deasserted when the module clock is enabled. To make sure that the gr2d module continues to work, we need to explicitly control the module reset. Fixes: 4782c0a5dd88 ("clk: tegra: Don't deassert reset on enabling clocks") Signed-off-by: Thierry Reding <[email protected]>
2021-12-16gpu: host1x: select CONFIG_DMA_SHARED_BUFFERArnd Bergmann1-0/+1
Linking fails when dma-buf is disabled: ld.lld: error: undefined symbol: dma_fence_release >>> referenced by fence.c >>> gpu/host1x/fence.o:(host1x_syncpt_fence_enable_signaling) in archive drivers/built-in.a >>> referenced by fence.c >>> gpu/host1x/fence.o:(host1x_fence_signal) in archive drivers/built-in.a >>> referenced by fence.c >>> gpu/host1x/fence.o:(do_fence_timeout) in archive drivers/built-in.a Fixes: 687db2207b1b ("gpu: host1x: Add DMA fence implementation") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Mikko Perttunen <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16gpu: host1x: Drop excess kernel-doc entry @keyRandy Dunlap1-1/+0
Fix kernel-doc warning in host1x: ../drivers/gpu/host1x/bus.c:774: warning: Excess function parameter 'key' description in '__host1x_client_register' Fixes: 0cfe5a6e758f ("gpu: host1x: Split up client initalization and registration") Signed-off-by: Randy Dunlap <[email protected]> Cc: Thierry Reding <[email protected]> Cc: [email protected] Cc: [email protected] Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: dc: rgb: Move PCLK shifter programming to CRTCDmitry Osipenko2-4/+6
Asus TF700T tablet uses TC358768 DPI->DSI bridge that sits between Tegra's DPI output and display panel input. Bridge requires to have stable PCLK output before RGB encoder is enabled because it uses PCLK by itself to clock internal logic and bridge is programmed before Tegra's encoder is enabled. Hence the PCLK clock shifter must be programmed when CRTC is enabled, otherwise clock is unstable and bridge hangs because of it. Move the shifter programming from RGB encoder into CRTC. Tested-by: Maxim Schwalm <[email protected]> #TF700T Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Bump VIC/NVDEC clock rates to FmaxMikko Perttunen2-0/+12
To get full performance out of these engines, bump their clock rates to maximum. In the future we may want something smarter but this should be fine for now. Signed-off-by: Mikko Perttunen <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Add NVDEC driverMikko Perttunen6-1/+491
Add support for booting and using NVDEC on Tegra210, Tegra186 and Tegra194 to the Host1x and TegraDRM drivers. Booting in secure mode is not currently supported. Signed-off-by: Mikko Perttunen <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Support asynchronous commits for cursorThierry Reding1-4/+76
This adds support for asynchronously updating the cursor plane, which enables support for the legacy cursor IOCTLs. Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Propagate errors from drm_gem_plane_helper_prepare_fb()Thierry Reding1-1/+4
Currently this function doesn't return an error, but that may change in the future, so make sure to propagate any error codes that it might return. Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Do not reference tegra_plane_funcs directlyThierry Reding1-2/+2
Instead of referencing the tegra_plane_funcs struct directly, use each plane's vtable instead. This makes it more future-proof in case any of the planes ever use a different set of functions. Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Implement buffer object cacheThierry Reding9-17/+141
This cache is used to avoid mapping and unmapping buffer objects unnecessarily. Mappings are cached per client and stay hot until the buffer object is destroyed. Signed-off-by: Thierry Reding <[email protected]>
2021-12-16drm/tegra: Implement correct DMA-BUF semanticsThierry Reding9-288/+268
DMA-BUF requires that each device that accesses a DMA-BUF attaches to it separately. To do so the host1x_bo_pin() and host1x_bo_unpin() functions need to be reimplemented so that they can return a mapping, which either represents an attachment or a map of the driver's own GEM object. Signed-off-by: Thierry Reding <[email protected]>
2021-12-16Merge branch 'tegra-for-5.17-soc-opp' of ↵Thierry Reding2-0/+40
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into drm/tegra/for-next
2021-12-16soc/tegra: Add devm_tegra_core_dev_init_opp_table_common()Dmitry Osipenko1-0/+15
Only couple drivers need to get the -ENODEV error code and majority of drivers need to explicitly initialize the performance state. Add new common helper which sets up OPP table for these drivers. Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-12-16soc/tegra: Enable runtime PM during OPP state-syncingDmitry Osipenko1-0/+25
GENPD core now can set up domain's performance state properly while device is RPM-suspended. Runtime PM of a device must be enabled during setup because GENPD checks whether device is suspended and check doesn't work while RPM is disabled. Instead of replicating the boilerplate RPM-enable code around OPP helper for each driver, let's make OPP helper to take care of enabling it. Reviewed-by: Ulf Hansson <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2021-11-21Linux 5.16-rc2Linus Torvalds1-1/+1
2021-11-21Merge tag 'x86-urgent-2021-11-21' of ↵Linus Torvalds2-33/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - Move the command line preparation and the early command line parsing earlier so that the command line parameters which affect early_reserve_memory(), e.g. efi=nosftreserve, are taken into account. This was broken when the invocation of early_reserve_memory() was moved recently. - Use an atomic type for the SGX page accounting, which is read and written locklessly, to plug various race conditions related to it. * tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Fix free page accounting x86/boot: Pull up cmdline preparation and early param parsing
2021-11-21Merge tag 'perf-urgent-2021-11-21' of ↵Linus Torvalds2-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fixes from Thomas Gleixner: - Remove unneded PEBS disabling when taking LBR snapshots to prevent an unchecked MSR access error. - Fix IIO event constraints for Snowridge and Skylake server chips. * tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/perf: Fix snapshot_branch_stack warning in VM perf/x86/intel/uncore: Fix IIO event constraints for Snowridge perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server
2021-11-21Merge tag 'powerpc-5.16-2' of ↵Linus Torvalds11-59/+52
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc fixes from Michael Ellerman: - Fix a bug in copying of sigset_t for 32-bit systems, which caused X to not start. - Fix handling of shared LSIs (rare) with the xive interrupt controller (Power9/10). - Fix missing TOC setup in some KVM code, which could result in oopses depending on kernel data layout. - Fix DMA mapping when we have persistent memory and only one DMA window available. - Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a recent fix. - A couple of other minor fixes. Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater, Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König. * tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xive: Change IRQ domain to a tree domain powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX powerpc/signal32: Fix sigset_t copy powerpc/book3e: Fix TLBCAM preset at boot powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window powerpc/pseries/ddw: simplify enable_ddw() powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory" powerpc/pseries: Fix numa FORM2 parsing fallback code powerpc/pseries: rename numa_dist_table to form2_distances powerpc: clean vdso32 and vdso64 directories powerpc/83xx/mpc8349emitx: Drop unused variable KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()
2021-11-21pstore/blk: Use "%lu" to format unsigned longGeert Uytterhoeven1-1/+1
On 32-bit: fs/pstore/blk.c: In function ‘__best_effort_init’: include/linux/kern_levels.h:5:18: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 3 has type ‘long unsigned int’ [-Wformat=] 5 | #define KERN_SOH "\001" /* ASCII Start Of Header */ | ^~~~~~ include/linux/kern_levels.h:14:19: note: in expansion of macro ‘KERN_SOH’ 14 | #define KERN_INFO KERN_SOH "6" /* informational */ | ^~~~~~~~ include/linux/printk.h:373:9: note: in expansion of macro ‘KERN_INFO’ 373 | printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) | ^~~~~~~~~ fs/pstore/blk.c:314:3: note: in expansion of macro ‘pr_info’ 314 | pr_info("attached %s (%zu) (no dedicated panic_write!)\n", | ^~~~~~~ Cc: [email protected] Fixes: 7bb9557b48fcabaa ("pstore/blk: Use the normal block device I/O path") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: Jens Axboe <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-20Merge branch 'akpm' (patches from Andrew)Linus Torvalds22-116/+254
Merge misc fixes from Andrew Morton: "15 patches. Subsystems affected by this patch series: ipc, hexagon, mm (swap, slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc" * emailed patches from Andrew Morton <[email protected]>: proc/vmcore: fix clearing user buffer by properly using clear_user() kmap_local: don't assume kmap PTEs are linear arrays in memory mm/damon/dbgfs: fix missed use of damon_dbgfs_lock mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation kasan: test: silence intentional read overflow warnings hugetlb, userfaultfd: fix reservation restore on userfaultfd error hugetlb: fix hugetlb cgroup refcounting during mremap mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag hexagon: ignore vmlinux.lds hexagon: clean up timer-regs.h hexagon: export raw I/O routines for modules mm: emit the "free" trace report before freeing memory in kmem_cache_free() shm: extend forced shm destroy to support objects from several IPC nses ipc: WARN if trying to remove ipc object which is absent mm/swap.c:put_pages_list(): reinitialise the page list
2021-11-20Merge tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-blockLinus Torvalds11-35/+59
Pull block fixes from Jens Axboe: - Flip a cap check to avoid a selinux error (Alistair) - Fix for a regression this merge window where we can miss a queue ref put (me) - Un-mark pstore-blk as broken, as the condition that triggered that change has been rectified (Kees) - Queue quiesce and sync fixes (Ming) - FUA insertion fix (Ming) - blk-cgroup error path put fix (Yu) * tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block: blk-mq: don't insert FUA request with data into scheduler queue blk-cgroup: fix missing put device in error path from blkg_conf_pref() block: avoid to quiesce queue in elevator_init_mq Revert "mark pstore-blk as broken" blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release() block: fix missing queue put in error path block: Check ADMIN before NICE for IOPRIO_CLASS_RT
2021-11-20Merge tag 'pinctrl-v5.16-2' of ↵Linus Torvalds10-176/+51
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "There is an ACPI stubs fix which is ACKed by the ACPI maintainer for merging through my tree. One item stand out and that is that I delete the <linux/sdb.h> header that is used by nothing. I deleted this subsystem (through the GPIO tree) a while back so I feel responsible for tidying up the floor. Other than that it is the usual mistakes, a bit noisy around build issue and Kconfig then driver fixes. Specifics: - Fix some stubs causing compile issues for ACPI. - Fix some wakeups on AMD IRQs shared between GPIO and SCI. - Fix a build warning in the Tegra driver. - Fix a Kconfig issue in the Qualcomm driver. - Add a missing include the RALink driver. - Return a valid type for the Apple pinctrl IRQs. - Implement some Qualcomm SDM845 dual-edge errata. - Remove the unused <linux/sdb.h> header. (The subsystem was once deleted by the pinctrl maintainer...) - Fix a duplicate initialized in the Tegra driver. - Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver" * tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: sm8350: Correct UFS and SDC offsets pinctrl: tegra194: remove duplicate initializer again Remove unused header <linux/sdb.h> pinctrl: qcom: sdm845: Enable dual edge errata pinctrl: apple: Always return valid type in apple_gpio_irq_type pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c' pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group() pinctrl: amd: Fix wakeups when IRQ is shared with SCI ACPI: Add stubs for wakeup handler functions
2021-11-20Merge tag 's390-5.16-3' of ↵Linus Torvalds21-138/+170
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Add missing Kconfig option for ftrace direct multi sample, so it can be compiled again, and also add s390 support for this sample. - Update Christian Borntraeger's email address. - Various fixes for memory layout setup. Besides other this makes it possible to load shared DCSS segments again. - Fix copy to user space of swapped kdump oldmem. - Remove -mstack-guard and -mstack-size compile options when building vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and results in broken vdso code which causes more or less random exceptions. Also remove the not needed -nostdlib option. - Fix memory leak on cpu hotplug and return code handling in kexec code. - Wire up futex_waitv system call. - Replace snprintf with sysfs_emit where appropriate. * tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: ftrace/samples: add s390 support for ftrace direct multi sample ftrace/samples: add missing Kconfig option for ftrace direct multi sample MAINTAINERS: update email address of Christian Borntraeger s390/kexec: fix memory leak of ipl report buffer s390/kexec: fix return code handling s390/dump: fix copying to user-space of swapped kdump oldmem s390: wire up sys_futex_waitv system call s390/vdso: filter out -mstack-guard and -mstack-size s390/vdso: remove -nostdlib compiler flag s390: replace snprintf in show functions with sysfs_emit s390/boot: simplify and fix kernel memory layout setup s390/setup: re-arrange memblock setup s390/setup: avoid using memblock_enforce_memory_limit s390/setup: avoid reserving memory above identity mapping
2021-11-20Merge tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds5-34/+21
Pull cifs fixes from Steve French: "Three small cifs/smb3 fixes: two to address minor coverity issues and one cleanup" * tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: introduce cifs_ses_mark_for_reconnect() helper cifs: protect srv_count with cifs_tcp_ses_lock cifs: move debug print out of spinlock
2021-11-20proc/vmcore: fix clearing user buffer by properly using clear_user()David Hildenbrand1-8/+12
To clear a user buffer we cannot simply use memset, we have to use clear_user(). With a virtio-mem device that registers a vmcore_cb and has some logically unplugged memory inside an added Linux memory block, I can easily trigger a BUG by copying the vmcore via "cp": systemd[1]: Starting Kdump Vmcore Save Service... kdump[420]: Kdump is using the default log level(3). kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/ kdump[465]: saving vmcore-dmesg.txt complete kdump[467]: saving vmcore BUG: unable to handle page fault for address: 00007f2374e01000 #PF: supervisor write access in kernel mode #PF: error_code(0x0003) - permissions violation PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867 Oops: 0003 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86 Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81 RSP: 0018:ffffc9000073be08 EFLAGS: 00010212 RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000 RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008 RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50 R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000 R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8 FS: 00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0 Call Trace: read_vmcore+0x236/0x2c0 proc_reg_read+0x55/0xa0 vfs_read+0x95/0x190 ksys_read+0x4f/0xc0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access Prevention (SMAP)", which is used to detect wrong access from the kernel to user buffers like this: SMAP triggers a permissions violation on wrong access. In the x86-64 variant of clear_user(), SMAP is properly handled via clac()+stac(). To fix, properly use clear_user() when we're dealing with a user buffer. Link: https://lkml.kernel.org/r/[email protected] Fixes: 997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages") Signed-off-by: David Hildenbrand <[email protected]> Acked-by: Baoquan He <[email protected]> Cc: Dave Young <[email protected]> Cc: Baoquan He <[email protected]> Cc: Vivek Goyal <[email protected]> Cc: Philipp Rudo <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-20kmap_local: don't assume kmap PTEs are linear arrays in memoryArd Biesheuvel3-11/+25
The kmap_local conversion broke the ARM architecture, because the new code assumes that all PTEs used for creating kmaps form a linear array in memory, and uses array indexing to look up the kmap PTE belonging to a certain kmap index. On ARM, this cannot work, not only because the PTE pages may be non-adjacent in memory, but also because ARM/!LPAE interleaves hardware entries and extended entries (carrying software-only bits) in a way that is not compatible with array indexing. Fortunately, this only seems to affect configurations with more than 8 CPUs, due to the way the per-CPU kmap slots are organized in memory. Work around this by permitting an architecture to set a Kconfig symbol that signifies that the kmap PTEs do not form a lineary array in memory, and so the only way to locate the appropriate one is to walk the page tables. Link: https://lore.kernel.org/linux-arm-kernel/[email protected]/ Link: https://lkml.kernel.org/r/[email protected] Fixes: 2a15ba82fa6c ("ARM: highmem: Switch to generic kmap atomic") Signed-off-by: Ard Biesheuvel <[email protected]> Reported-by: Quanyang Wang <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Acked-by: Russell King (Oracle) <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-20mm/damon/dbgfs: fix missed use of damon_dbgfs_lockSeongJae Park1-3/+9
DAMON debugfs is supposed to protect dbgfs_ctxs, dbgfs_nr_ctxs, and dbgfs_dirs using damon_dbgfs_lock. However, some of the code is accessing the variables without the protection. This fixes it by protecting all such accesses. Link: https://lkml.kernel.org/r/[email protected] Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts") Signed-off-by: SeongJae Park <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-20mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocationSeongJae Park1-4/+4
Patch series "DAMON fixes". This patch (of 2): DAMON users can trigger below warning in '__alloc_pages()' by invoking write() to some DAMON debugfs files with arbitrarily high count argument, because DAMON debugfs interface allocates some buffers based on the user-specified 'count'. if (unlikely(order >= MAX_ORDER)) { WARN_ON_ONCE(!(gfp & __GFP_NOWARN)); return NULL; } Because the DAMON debugfs interface code checks failure of the 'kmalloc()', this commit simply suppresses the warnings by adding '__GFP_NOWARN' flag. Link: https://lkml.kernel.org/r/[email protected] Link: https://lkml.kernel.org/r/[email protected] Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface") Signed-off-by: SeongJae Park <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-20kasan: test: silence intentional read overflow warningsKees Cook1-0/+2
As done in commit d73dad4eb5ad ("kasan: test: bypass __alloc_size checks") for __write_overflow warnings, also silence some more cases that trip the __read_overflow warnings seen in 5.16-rc1[1]: In file included from include/linux/string.h:253, from include/linux/bitmap.h:10, from include/linux/cpumask.h:12, from include/linux/mm_types_task.h:14, from include/linux/mm_types.h:5, from include/linux/page-flags.h:13, from arch/arm64/include/asm/mte.h:14, from arch/arm64/include/asm/pgtable.h:12, from include/linux/pgtable.h:6, from include/linux/kasan.h:29, from lib/test_kasan.c:10: In function 'memcmp', inlined from 'kasan_memcmp' at lib/test_kasan.c:897:2: include/linux/fortify-string.h:263:25: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter) 263 | __read_overflow(); | ^~~~~~~~~~~~~~~~~ In function 'memchr', inlined from 'kasan_memchr' at lib/test_kasan.c:872:2: include/linux/fortify-string.h:277:17: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter) 277 | __read_overflow(); | ^~~~~~~~~~~~~~~~~ [1] http://kisskb.ellerman.id.au/kisskb/buildresult/14660585/log/ Link: https://lkml.kernel.org/r/[email protected] Fixes: d73dad4eb5ad ("kasan: test: bypass __alloc_size checks") Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Andrey Konovalov <[email protected]> Acked-by: Marco Elver <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Dmitry Vyukov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-11-20hugetlb, userfaultfd: fix reservation restore on userfaultfd errorMina Almasry1-3/+4
Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we bail out using "goto out_release_unlock;" in the cases where idx >= size, or !huge_pte_none(), the code will detect that new_pagecache_page == false, and so call restore_reserve_on_error(). In this case I see restore_reserve_on_error() delete the reservation, and the following call to remove_inode_hugepages() will increment h->resv_hugepages causing a 100% reproducible leak. We should treat the is_continue case similar to adding a page into the pagecache and set new_pagecache_page to true, to indicate that there is no reservation to restore on the error path, and we need not call restore_reserve_on_error(). Rename new_pagecache_page to page_in_pagecache to make that clear. Link: https://lkml.kernel.org/r/[email protected] Fixes: c7b1850dfb41 ("hugetlb: don't pass page cache pages to restore_reserve_on_error") Signed-off-by: Mina Almasry <[email protected]> Reported-by: James Houghton <[email protected]> Reviewed-by: Mike Kravetz <[email protected]> Cc: Wei Xu <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.