aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-03-29rtc: mc146818-lib: Fix the AltCentury for AMD platformsMario Limonciello2-1/+17
Setting the century forward has been failing on AMD platforms. There was a previous attempt at fixing this for family 0x17 as part of commit 7ad295d5196a ("rtc: Fix the AltCentury value on AMD/Hygon platform") but this was later reverted due to some problems reported that appeared to stem from an FW bug on a family 0x17 desktop system. The same comments mentioned in the previous commit continue to apply to the newer platforms as well. ``` MC146818 driver use function mc146818_set_time() to set register RTC_FREQ_SELECT(RTC_REG_A)'s bit4-bit6 field which means divider stage reset value on Intel platform to 0x7. While AMD/Hygon RTC_REG_A(0Ah)'s bit4 is defined as DV0 [Reference]: DV0 = 0 selects Bank 0, DV0 = 1 selects Bank 1. Bit5-bit6 is defined as reserved. DV0 is set to 1, it will select Bank 1, which will disable AltCentury register(0x32) access. As UEFI pass acpi_gbl_FADT.century 0x32 (AltCentury), the CMOS write will be failed on code: CMOS_WRITE(century, acpi_gbl_FADT.century). Correct RTC_REG_A bank select bit(DV0) to 0 on AMD/Hygon CPUs, it will enable AltCentury(0x32) register writing and finally setup century as expected. ``` However in closer examination the change previously submitted was also modifying bits 5 & 6 which are declared reserved in the AMD documentation. So instead modify just the DV0 bank selection bit. Being cognizant that there was a failure reported before, split the code change out to a static function that can also be used for exclusions if any regressions such as Mikhail's pop up again. Cc: Jinke Fan <[email protected]> Cc: Mikhail Gavrilov <[email protected]> Link: https://lore.kernel.org/all/CABXGCsMLob0DC25JS8wwAYydnDoHBSoMh2_YLPfqm3TTvDE-Zw@mail.gmail.com/ Link: https://www.amd.com/system/files/TechDocs/51192_Bolton_FCH_RRG.pdf Signed-off-by: Raul E Rangel <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Alexandre Belloni <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-29io_uring: defer msg-ring file validity check until command issueJens Axboe1-4/+7
In preparation for not using the file at prep time, defer checking if this file refers to a valid io_uring instance until issue time. Signed-off-by: Jens Axboe <[email protected]>
2022-03-29parisc: Fix patch code locking and flushingJohn David Anglin1-14/+11
This change fixes the following: 1) The flags variable is not initialized. Always use raw_spin_lock_irqsave and raw_spin_unlock_irqrestore to serialize patching. 2) flush_kernel_vmap_range is primarily intended for DMA flushes. Since __patch_text_multiple is often called with interrupts disabled, it is better to directly call flush_kernel_dcache_range_asm and flush_kernel_icache_range_asm. This avoids an extra call. 3) The final call to flush_icache_range is unnecessary. Signed-off-by: John David Anglin <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Find a new timesync master if current CPU is removedHelge Deller3-1/+10
When CPU hotplugging is enabled, the user may want to remove the current CPU which is providing the timer ticks. If this happens we need to find a new timesync master. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Move common_stext into .text section when CONFIG_HOTPLUG_CPU=yHelge Deller1-2/+9
Move the common_stext function into the non-init text section if hotplug is enabled. This function is called from the firmware when hotplugged CPUs are brought up. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Rewrite arch_cpu_idle_dead() for CPU hotpluggingHelge Deller1-3/+24
Let the PDC firmware put the CPU into firmware idle loop with the pdc_cpu_rendezvous() function. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Implement __cpu_die() and __cpu_disable() for CPU hotpluggingHelge Deller3-22/+90
Add relevant code to __cpu_die() and __cpu_disable() to finally enable the CPU hotplugging features. Reset the irq count values in smp_callin() to zero before bringing up the CPU. It seems that the firmware may need up to 8 seconds to fully stop a CPU in which no other PDC calls are allowed to be made. Use a timeout __cpu_die() to accommodate for this. Use "chcpu -d 1" to bring CPU1 down, and "chcpu -e 1" to bring it up. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Add PDC locking functions for rendezvous codeHelge Deller3-1/+42
Add pdc_cpu_rendezvous_lock() and pdc_cpu_rendezvous_unlock() to lock PDC while CPU is transitioning into rendezvous state. This is needed, because the transition phase may take up to 8 seconds. Add pdc_pat_get_PDC_entrypoint() to get PDC entry point for current CPU. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Move disable_sr_hashing_asm() into .text sectionHelge Deller1-1/+1
Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Move CPU startup-related functions into .text sectionHelge Deller4-4/+4
If CONFIG_HOTPLUG_CPU is enabled, those functions will be run again after bootup. So they need to reside in the .text section. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Move store_cpu_topology() into text sectionHelge Deller1-2/+3
Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Switch from GENERIC_CPU_DEVICES to GENERIC_ARCH_TOPOLOGYHelge Deller5-88/+24
Switch away from the own cpu topology code to common code which is used by ARM64 and RISCV. That will allow us to enable CPU hotplug later on. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Ensure set_firmware_width() is called only onceHelge Deller1-1/+6
Call set_firmware_width() only once at runtime. This prevents that hotplugged CPUs will get stuck in spinlocks later on. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Add constants for control registers and clean up mfctl()Helge Deller1-9/+8
Clean up the code for the mfctl() and mtctl() functions and add often used constants. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Detect hppa-suse-linux-gcc compiler for cross-buildingHelge Deller1-2/+2
Allow the system to find the SUSE hppa compiler and linker to set CROSS32_COMPILE and CROSS_COMPILE. Suggested-by: Jiri Slaby <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Clean up cpu_check_affinity() and drop cpu_set_affinity_irq()Helge Deller1-21/+2
The cpu_set_affinity_irq() isn't needed. Not the CPU irqs need to change, but the slave irq chips simply need to be reprogrammed to a new CPU irq with the txn_* functions. Signed-off-by: Helge Deller <[email protected]>
2022-03-29parisc: Fix CPU affinity for Lasi, WAX and Dino chipsHelge Deller5-16/+71
Add the missing logic to allow Lasi, WAX and Dino to set the CPU affinity. This fixes IRQ migration to other CPUs when a CPU is shutdown which currently holds the IRQs for one of those chips. Signed-off-by: Helge Deller <[email protected]>
2022-03-29x86/fpu: Remove redundant XCOMP_BV initializationThomas Gleixner1-3/+0
fpu_copy_uabi_to_guest_fpstate() initializes the XCOMP_BV field in the XSAVE header. That's a leftover from the old KVM FPU buffer handling code. Since d69c1382e1b7 ("x86/kvm: Convert FPU handling to a single swap buffer") KVM uses the FPU core allocation code, which initializes the XCOMP_BV field already. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-29Merge tag 'devprop-5.18-rc1' of ↵Linus Torvalds2-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties code update from Rafael Wysocki: "This is based on new i2c material for 5.18-rc1 and simply reorganizes the code on top of it so as to group similar functions together (Andy Shevchenko)" * tag 'devprop-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Don't split fwnode_get_irq*() APIs in the code
2022-03-29Merge tag 'pm-5.18-rc1-2' of ↵Linus Torvalds26-1220/+1171
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These update ARM cpufreq drivers, the OPP (Operating Performance Points) library and the power management documentation. Specifics: - Add per core DVFS support for QCom SoC (Bjorn Andersson), convert to yaml binding (Manivannan Sadhasivam) and various other fixes to the QCom drivers (Luca Weiss). - Add OPP table for imx7s SoC (Denys Drozdov) and minor fixes (Stefan Agner). - Fix CPPC driver's freq/performance conversions (Pierre Gondois). - Minor generic cleanups (Yury Norov). - Introduce opp-microwatt property to the OPP core, bindings, etc (Lukasz Luba). - Convert DT bindings to schema format and various related fixes (Yassine Oudjana). - Expose OPP's OF node in debugfs (Viresh Kumar). - Add Intel uncore frequency scaling documentation file to its MAINTAINERS entry (Srinivas Pandruvada). - Clean up the AMD P-state driver documentation (Jan Engelhardt)" * tag 'pm-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) Documentation: amd-pstate: grammar and sentence structure updates dt-bindings: cpufreq: cpufreq-qcom-hw: Convert to YAML bindings dt-bindings: dvfs: Use MediaTek CPUFREQ HW as an example Documentation: EM: Describe new registration method using DT OPP: Add support of "opp-microwatt" for EM registration PM: EM: add macro to set .active_power() callback conditionally OPP: Add "opp-microwatt" supporting code dt-bindings: opp: Add "opp-microwatt" entry in the OPP MAINTAINERS: Add additional file to uncore frequency control cpufreq: blocklist Qualcomm sc8280xp and sa8540p in cpufreq-dt-platdev cpufreq: qcom-hw: Add support for per-core-dcvs dt-bindings: power: avs: qcom,cpr: Convert to DT schema arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables arm64: dts: qcom: msm8996: Rename cluster OPP tables dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema dt-bindings: opp: qcom-opp: Convert to DT schema arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles opp: Expose of-node's name in debugfs cpufreq: CPPC: Fix performance/frequency conversion ...
2022-03-29KVM: x86: Forbid VMM to set SYNIC/STIMER MSRs when SynIC wasn't activatedVitaly Kuznetsov1-3/+6
Setting non-zero values to SYNIC/STIMER MSRs activates certain features, this should not happen when KVM_CAP_HYPERV_SYNIC{,2} was not activated. Note, it would've been better to forbid writing anything to SYNIC/STIMER MSRs, including zeroes, however, at least QEMU tries clearing HV_X64_MSR_STIMER0_CONFIG without SynIC. HV_X64_MSR_EOM MSR is somewhat 'special' as writing zero there triggers an action, this also should not happen when SynIC wasn't activated. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29KVM: x86: Avoid theoretical NULL pointer dereference in ↵Vitaly Kuznetsov1-0/+4
kvm_irq_delivery_to_apic_fast() When kvm_irq_delivery_to_apic_fast() is called with APIC_DEST_SELF shorthand, 'src' must not be NULL. Crash the VM with KVM_BUG_ON() instead of crashing the host. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29KVM: x86: Check lapic_in_kernel() before attempting to set a SynIC irqVitaly Kuznetsov1-0/+3
When KVM_CAP_HYPERV_SYNIC{,2} is activated, KVM already checks for irqchip_in_kernel() so normally SynIC irqs should never be set. It is, however, possible for a misbehaving VMM to write to SYNIC/STIMER MSRs causing erroneous behavior. The immediate issue being fixed is that kvm_irq_delivery_to_apic() (kvm_irq_delivery_to_apic_fast()) crashes when called with 'irq.shorthand = APIC_DEST_SELF' and 'src == NULL'. Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29Documentation: KVM: add API issues sectionPaolo Bonzini1-0/+46
Add a section to document all the different ways in which the KVM API sucks. I am sure there are way more, give people a place to vent so that userspace authors are aware. Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29Documentation: KVM: add virtual CPU errata documentationPaolo Bonzini2-0/+40
Add a file to document all the different ways in which the virtual CPU emulation is imperfect. Include an example to show how to document such errata. Signed-off-by: Paolo Bonzini <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29Documentation: KVM: add separate directories for architecture-specific ↵Paolo Bonzini15-19/+37
documentation ARM already has an arm/ subdirectory, but s390 and x86 do not even though they have a relatively large number of files specific to them. Create new directories in Documentation/virt/kvm for these two architectures as well. While at it, group the API documentation and the developer documentation in the table of contents. Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29Documentation: kvm: include new locksPaolo Bonzini1-0/+15
kvm->mn_invalidate_lock and kvm->slots_arch_lock were not included in the documentation, add them. Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29Documentation: kvm: fixes for locking.rstPaolo Bonzini1-9/+19
Separate the various locks clearly, and include the new names of blocked_vcpu_on_cpu_lock and blocked_vcpu_on_cpu. Signed-off-by: Paolo Bonzini <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29KVM: x86: Fix clang -Wimplicit-fallthrough in do_host_cpuid()Nathan Chancellor1-0/+1
Clang warns: arch/x86/kvm/cpuid.c:739:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough] default: ^ arch/x86/kvm/cpuid.c:739:2: note: insert 'break;' to avoid fall-through default: ^ break; 1 error generated. Clang is a little more pedantic than GCC, which does not warn when falling through to a case that is just break or return. Clang's version is more in line with the kernel's own stance in deprecated.rst, which states that all switch/case blocks must end in either break, fallthrough, continue, goto, or return. Add the missing break to silence the warning. Fixes: f144c49e8c39 ("KVM: x86: synthesize CPUID leaf 0x80000021h if useful") Reported-by: kernel test robot <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29Merge branches 'clk-sifive' and 'clk-visconti' into clk-nextStephen Boyd16-279/+259
* clk-sifive: clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being * clk-visconti: clk: visconti: prevent array overflow in visconti_clk_register_gates()
2022-03-29Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into ↵Stephen Boyd54-1042/+6666
clk-next - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...
2022-03-29Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' ↵Stephen Boyd57-1851/+700
into clk-next - Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags
2022-03-29Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into ↵Stephen Boyd49-362/+1724
clk-next - Mark mux table as const in clk-mux - Make the all_lists array const * clk-mvebu: clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it * clk-const: clk: Mark clk_core_evict_parent_cache_subtree() 'target' const clk: Mark 'all_lists' as const clk: pistachio: Declare mux table as const u32[] clk: qcom: Declare mux table as const u32[] clk: mmp: Declare mux tables as const u32[] clk: hisilicon: Remove unnecessary cast of mux table to u32 * clk: mux: Declare u32 *table parameter as const clk: nxp: Declare mux table parameter as const u32 * clk: nxp: Remove unused variable * clk-imx: (28 commits) dt-bindings: clock: drop useless consumer example clk: imx: Select MXC_CLK for i.MX93 clock driver clk: imx: remove redundant re-assignment of pll->base MAINTAINERS: clk: imx: add git tree and dt-bindings files clk: imx: pll14xx: Support dynamic rates clk: imx: pll14xx: Add pr_fmt clk: imx: pll14xx: explicitly return lowest rate clk: imx: pll14xx: name variables after usage clk: imx: pll14xx: consolidate rate calculation clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP clk: imx: pll14xx: Drop wrong shifting clk: imx: pll14xx: Use register defines consistently clk: imx8mp: remove SYS PLL 1/2 clock gates clk: imx8mn: remove SYS PLL 1/2 clock gates clk: imx8mm: remove SYS PLL 1/2 clock gates clk: imx: add i.MX93 clk clk: imx: support fracn gppll clk: imx: add i.MX93 composite clk dt-bindings: clock: add i.MX93 clock definition dt-bindings: clock: Add imx93 clock support ... * clk-rockchip: clk: rockchip: re-add rational best approximation algorithm to the fractional divider clk/rockchip: Use of_device_get_match_data() clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568 clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568 clk: rockchip: Add more PLL rates for rk3568
2022-03-29Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' ↵Stephen Boyd28-337/+1744
into clk-next - Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks
2022-03-29Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' ↵Stephen Boyd69-460/+1516
into clk-next - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code * clk-microchip: clk: microchip: Add driver for Microchip PolarFire SoC dt-bindings: clk: microchip: Add Microchip PolarFire host binding * clk-si: clk-si5341: replace snprintf in show functions with sysfs_emit clk: si5341: fix reported clk_rate when output divider is 2 * clk-mtk: (32 commits) clk: mediatek: Warn if clk IDs are duplicated clk: mediatek: mt8195: Implement remove functions clk: mediatek: mt8195: Implement error handling in probe functions clk: mediatek: mt8195: Hook up mtk_clk_simple_remove() clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path clk: mediatek: mtk: Implement error handling in register APIs clk: mediatek: pll: Implement error handling in register API clk: mediatek: mux: Implement error handling in register API clk: mediatek: mux: Reverse check for existing clk to reduce nesting level clk: mediatek: gate: Implement error handling in register API clk: mediatek: cpumux: Implement error handling in register API clk: mediatek: mtk: Clean up included headers clk: mediatek: Add mtk_clk_simple_remove() clk: mediatek: Implement mtk_clk_unregister_composites() API clk: mediatek: Implement mtk_clk_unregister_divider_clks() API clk: mediatek: Implement mtk_clk_unregister_factors() API clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API clk: mediatek: pll: Clean up included headers clk: mediatek: pll: Implement unregister API clk: mediatek: pll: Split definitions into separate header file ... * clk-at91: clk: at91: clk-master: remove dead code clk: at91: sama7g5: fix parents of PDMCs' GCLK clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT * clk-st: clk: stm32mp1: Add parent_data to ETHRX clock clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock
2022-03-29clk: zynq: Update the parameters to zynq_clk_register_periph_clkShubhrajyoti Datta1-6/+6
In case there are only one gate or the two_gate is 0 the clk1 clock passed is not used. We are passing 0 which is arm_pll. Pass a invalid clock instead. Signed-off-by: Shubhrajyoti Datta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2022-03-29clk: zynq: trivial warning fixShubhrajyoti Datta1-0/+1
Fix the below warning WARNING: Missing a blank line after declarations + int enable = !!(fclk_enable & BIT(i - fclk0)); + zynq_clk_register_fclk(i, clk_output_name[i], Signed-off-by: Shubhrajyoti Datta <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2022-03-29Revert "KVM: set owner of cpu and vm file operations"David Matlack1-4/+2
This reverts commit 3d3aab1b973b01bd2a1aa46307e94a1380b1d802. Now that the KVM module's lifetime is tied to kvm.users_count, there is no need to also tie it's lifetime to the lifetime of the VM and vCPU file descriptors. Suggested-by: Sean Christopherson <[email protected]> Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29KVM: Prevent module exit until all VMs are freedDavid Matlack1-0/+13
Tie the lifetime the KVM module to the lifetime of each VM via kvm.users_count. This way anything that grabs a reference to the VM via kvm_get_kvm() cannot accidentally outlive the KVM module. Prior to this commit, the lifetime of the KVM module was tied to the lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU file descriptors by their respective file_operations "owner" field. This approach is insufficient because references grabbed via kvm_get_kvm() do not prevent closing any of the aforementioned file descriptors. This fixes a long standing theoretical bug in KVM that at least affects async page faults. kvm_setup_async_pf() grabs a reference via kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing prevents the VM file descriptor from being closed and the KVM module from being unloaded before this callback runs. Fixes: af585b921e5d ("KVM: Halt vcpu if page it tries to access is swapped out") Fixes: 3d3aab1b973b ("KVM: set owner of cpu and vm file operations") Cc: [email protected] Suggested-by: Ben Gardon <[email protected]> [ Based on a patch from Ben implemented for Google's kernel. ] Signed-off-by: David Matlack <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-03-29Merge branch 'pm-docs'Rafael J. Wysocki2-68/+68
Merge additional power management documentation udates for 5.18-rc1: - Add Intel uncore frequency scaling documentation file to its MAINTAINERS entry (Srinivas Pandruvada). - Clean up the AMD P-state driver documentation (Jan Engelhardt). * pm-docs: Documentation: amd-pstate: grammar and sentence structure updates MAINTAINERS: Add additional file to uncore frequency control
2022-03-29Merge branch 'pm-opp'Rafael J. Wysocki20-957/+851
Merge OPP (Operating Performance Points) changes for 5.18-rc1. * pm-opp: Documentation: EM: Describe new registration method using DT OPP: Add support of "opp-microwatt" for EM registration PM: EM: add macro to set .active_power() callback conditionally OPP: Add "opp-microwatt" supporting code dt-bindings: opp: Add "opp-microwatt" entry in the OPP dt-bindings: power: avs: qcom,cpr: Convert to DT schema arm64: dts: qcom: qcs404: Rename CPU and CPR OPP tables arm64: dts: qcom: msm8996: Rename cluster OPP tables dt-bindings: opp: Convert qcom-nvmem-cpufreq to DT schema dt-bindings: opp: qcom-opp: Convert to DT schema arm64: dts: qcom: msm8996-mtp: Add msm8996 compatible dt-bindings: arm: qcom: Add msm8996 and apq8096 compatibles opp: Expose of-node's name in debugfs
2022-03-29io_uring: fail links if msg-ring doesn't succeeedJens Axboe1-0/+2
We must always call req_set_fail() if the request is failed, otherwise we won't sever links for dependent chains correctly. Fixes: 4f57f06ce218 ("io_uring: add support for IORING_OP_MSG_RING command") Signed-off-by: Jens Axboe <[email protected]>
2022-03-29Merge tag 'devicetree-fixes-for-5.18-1' of ↵Linus Torvalds28-353/+338
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Clean-up missing '/schemas' in $ref paths - Fix MediaTek Vcodec decoder example 'dma-ranges' errors - Expand available values of PBL for snps,dwmac to fix warnings in mediatek-dwmac.yaml example - Fix warnings in MediaTek display bindings * tag 'devicetree-fixes-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Fix missing '/schemas' in $ref paths dt-bindings: media: mediatek,vcodec: Fix addressing cell sizes dt-bindings: net: snps,dwmac: modify available values of PBL dt-bindings: display: mediatek: Fix examples on new bindings dt-bindings: display: mediatek, ovl: Fix 'iommu' required property typo dt-bindings: display: mediatek, mutex: Fix mediatek, gce-events type Revert "dt-bindings: display: mediatek: add ethdr definition for mt8195"
2022-03-29Merge tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds18-160/+105
Pull dma-mapping updates from Christoph Hellwig: - do not zero buffer in set_memory_decrypted (Kirill A. Shutemov) - fix return value of dma-debug __setup handlers (Randy Dunlap) - swiotlb cleanups (Robin Murphy) - remove most remaining users of the pci-dma-compat.h API (Christophe JAILLET) - share the ABI header for the DMA map_benchmark with userspace (Tian Tao) - update the maintainer for DMA MAPPING BENCHMARK (Xiang Chen) - remove CONFIG_DMA_REMAP (me) * tag 'dma-mapping-5.18' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: benchmark: extract a common header file for map_benchmark definition dma-debug: fix return value of __setup handlers dma-mapping: remove CONFIG_DMA_REMAP media: v4l2-pci-skeleton: Remove usage of the deprecated "pci-dma-compat.h" API rapidio/tsi721: Remove usage of the deprecated "pci-dma-compat.h" API sparc: Remove usage of the deprecated "pci-dma-compat.h" API agp/intel: Remove usage of the deprecated "pci-dma-compat.h" API alpha: Remove usage of the deprecated "pci-dma-compat.h" API MAINTAINERS: update maintainer list of DMA MAPPING BENCHMARK swiotlb: simplify array allocation swiotlb: tidy up includes swiotlb: simplify debugfs setup swiotlb: do not zero buffer in set_memory_decrypted()
2022-03-29phy: PHY_FSL_LYNX_28G should depend on ARCH_LAYERSCAPEGeert Uytterhoeven1-2/+3
Freescale Layerscape Lynx 28G SerDes PHYs are only present on Freescale/NXP Layerscape SoCs. Move PHY_FSL_LYNX_28G outside the block for ARCH_MXC, as the latter is meant for i.MX8 SoCs, which is a different family than Layerscape. Add a dependency on ARCH_LAYERSCAPE, to prevent asking the user about this driver when configuring a kernel without Layerscape SoC support. Fixes: 02e2af20f4f9f2aa ("Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc") Fixes: 8f73b37cf3fbda67 ("phy: add support for the Layerscape SerDes 28G") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-03-29Revert "parisc: Fix invalidate/flush vmap routines"Helge Deller1-19/+5
This reverts commit 53d862fac4a09b9c56cca0433fa9de5732fd05a1. It turned out that flush_kernel_vmap_range() is being called with interrupts disabled. There's no way to flush entire cache with interrupts disabled. Signed-off-by: Helge Deller <[email protected]>
2022-03-29x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IOJoerg Roedel1-8/+57
The io-specific memcpy/memset functions use string mmio accesses to do their work. Under SEV, the hypervisor can't emulate these instructions because they read/write directly from/to encrypted memory. KVM will inject a page fault exception into the guest when it is asked to emulate string mmio instructions for an SEV guest: BUG: unable to handle page fault for address: ffffc90000065068 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 8000100000067 P4D 8000100000067 PUD 80001000fb067 PMD 80001000fc067 PTE 80000000fed40173 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-rc7 #3 As string mmio for an SEV guest can not be supported by the hypervisor, unroll the instructions for CC_ATTR_GUEST_UNROLL_STRING_IO enabled kernels. This issue appears when kernels are launched in recent libvirt-managed SEV virtual machines, because virt-install started to add a tpm-crb device to the guest by default and proactively because, raisins: https://github.com/virt-manager/virt-manager/commit/eb58c09f488b0633ed1eea012cd311e48864401e and as that commit says, the default adding of a TPM can be disabled with "virt-install ... --tpm none". The kernel driver for tpm-crb uses memcpy_to/from_io() functions to access MMIO memory, resulting in a page-fault injected by KVM and crashing the kernel at boot. [ bp: Massage and extend commit message. ] Fixes: d8aa7eea78a1 ('x86/mm: Add Secure Encrypted Virtualization (SEV) support') Signed-off-by: Joerg Roedel <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Tom Lendacky <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-03-29Merge tag 'nvme-5.18-2022-03-29' of git://git.infradead.org/nvme into ↵Jens Axboe16-57/+133
for-5.18/drivers Pull NVMe fixes from Christoph: "- fix multipath hang when disk goes live over reconnect (Anton Eidelman) - fix RCU hole that allowed for endless looping in multipath round robin (Chris Leech) - remove redundant assignment after left shift (Colin Ian King) - add quirks for Samsung X5 SSDs (Monish Kumar R) - fix the read-only state for zoned namespaces with unsupposed features (Pankaj Raghav) - use a private workqueue instead of the system workqueue in nvmet (Sagi Grimberg) - allow duplicate NSIDs for private namespaces (Sungup Moon) - expose use_threaded_interrupts read-only in sysfs (Xin Hao)" * tag 'nvme-5.18-2022-03-29' of git://git.infradead.org/nvme: nvme-multipath: fix hang when disk goes live over reconnect nvme: fix RCU hole that allowed for endless looping in multipath round robin nvme: allow duplicate NSIDs for private namespaces nvmet: remove redundant assignment after left shift nvmet: use a private workqueue instead of the system workqueue nvme-pci: add quirks for Samsung X5 SSDs nvme-pci: expose use_threaded_interrupts read-only in sysfs nvme: fix the read-only state for zoned namespaces with unsupposed features
2022-03-29net: lan966x: fix kernel oops on ioctl when I/F is downMichael Walle1-0/+3
ioctls handled by phy_mii_ioctl() will cause a kernel oops when the interface is down. Fix it by making sure there is a PHY attached. Fixes: 735fec995b21 ("net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP") Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-03-29Merge branch 'fix-uaf-bugs-caused-by-ax25_release'Paolo Abeni1-4/+9
Duoming Zhou says: ==================== Fix UAF bugs caused by ax25_release() The first patch fixes UAF bugs in ax25_send_control, and the second patch fixes UAF bugs in ax25 timers. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.