aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-19net: qualcomm: rmnet: Fix warning seen with 64 bit statsSubash Abhinov Kasiviswanathan1-1/+1
With CONFIG_DEBUG_PREEMPT enabled, a warning was seen on device creation. This occurs due to the incorrect cpu API usage in ndo_get_stats64 handler. BUG: using smp_processor_id() in preemptible [00000000] code: rmnetcli/5743 caller is debug_smp_processor_id+0x1c/0x24 Call trace: [<ffffff9d48c8967c>] dump_backtrace+0x0/0x2a8 [<ffffff9d48c89bbc>] show_stack+0x20/0x28 [<ffffff9d4901fff8>] dump_stack+0xa8/0xe0 [<ffffff9d490421e0>] check_preemption_disabled+0x104/0x108 [<ffffff9d49042200>] debug_smp_processor_id+0x1c/0x24 [<ffffff9d494a36b0>] rmnet_get_stats64+0x64/0x13c [<ffffff9d49b014e0>] dev_get_stats+0x68/0xd8 [<ffffff9d49d58df8>] rtnl_fill_stats+0x54/0x140 [<ffffff9d49b1f0b8>] rtnl_fill_ifinfo+0x428/0x9cc [<ffffff9d49b23834>] rtmsg_ifinfo_build_skb+0x80/0xf4 [<ffffff9d49b23930>] rtnetlink_event+0x88/0xb4 [<ffffff9d48cd21b4>] raw_notifier_call_chain+0x58/0x78 [<ffffff9d49b028a4>] call_netdevice_notifiers_info+0x48/0x78 [<ffffff9d49b08bf8>] __netdev_upper_dev_link+0x290/0x5e8 [<ffffff9d49b08fcc>] netdev_master_upper_dev_link+0x3c/0x48 [<ffffff9d494a2e74>] rmnet_newlink+0xf0/0x1c8 [<ffffff9d49b23360>] rtnl_newlink+0x57c/0x6c8 [<ffffff9d49b2355c>] rtnetlink_rcv_msg+0xb0/0x244 [<ffffff9d49b5230c>] netlink_rcv_skb+0xb4/0xdc [<ffffff9d49b204f4>] rtnetlink_rcv+0x34/0x44 [<ffffff9d49b51af0>] netlink_unicast+0x1ec/0x294 [<ffffff9d49b51fdc>] netlink_sendmsg+0x320/0x390 [<ffffff9d49ae6858>] sock_sendmsg+0x54/0x60 [<ffffff9d49ae91bc>] SyS_sendto+0x1a0/0x1e4 [<ffffff9d48c83770>] el0_svc_naked+0x24/0x28 Fixes: 192c4b5d48f2 ("net: qualcomm: rmnet: Add support for 64 bit stats") Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-19net: qualcomm: rmnet: Fix crash on real dev unregistrationSubash Abhinov Kasiviswanathan1-54/+14
With CONFIG_DEBUG_PREEMPT enabled, a crash with the following call stack was observed when removing a real dev which had rmnet devices attached to it. To fix this, remove the netdev_upper link APIs and instead use the existing information in rmnet_port and rmnet_priv to get the association between real and rmnet devs. BUG: sleeping function called from invalid context in_atomic(): 0, irqs_disabled(): 0, pid: 5762, name: ip Preemption disabled at: [<ffffff9d49043564>] debug_object_active_state+0xa4/0x16c Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: PC is at ___might_sleep+0x13c/0x180 LR is at ___might_sleep+0x17c/0x180 [<ffffff9d48ce0924>] ___might_sleep+0x13c/0x180 [<ffffff9d48ce09c0>] __might_sleep+0x58/0x8c [<ffffff9d49d6253c>] mutex_lock+0x2c/0x48 [<ffffff9d48ed4840>] kernfs_remove_by_name_ns+0x48/0xa8 [<ffffff9d48ed6ec8>] sysfs_remove_link+0x30/0x58 [<ffffff9d49b05840>] __netdev_adjacent_dev_remove+0x14c/0x1e0 [<ffffff9d49b05914>] __netdev_adjacent_dev_unlink_lists+0x40/0x68 [<ffffff9d49b08820>] netdev_upper_dev_unlink+0xb4/0x1fc [<ffffff9d494a29f0>] rmnet_dev_walk_unreg+0x6c/0xc8 [<ffffff9d49b00b40>] netdev_walk_all_lower_dev_rcu+0x58/0xb4 [<ffffff9d494a30fc>] rmnet_config_notify_cb+0xf4/0x134 [<ffffff9d48cd21b4>] raw_notifier_call_chain+0x58/0x78 [<ffffff9d49b028a4>] call_netdevice_notifiers_info+0x48/0x78 [<ffffff9d49b0b568>] rollback_registered_many+0x230/0x3c8 [<ffffff9d49b0b738>] unregister_netdevice_many+0x38/0x94 [<ffffff9d49b1e110>] rtnl_delete_link+0x58/0x88 [<ffffff9d49b201dc>] rtnl_dellink+0xbc/0x1cc [<ffffff9d49b2355c>] rtnetlink_rcv_msg+0xb0/0x244 [<ffffff9d49b5230c>] netlink_rcv_skb+0xb4/0xdc [<ffffff9d49b204f4>] rtnetlink_rcv+0x34/0x44 [<ffffff9d49b51af0>] netlink_unicast+0x1ec/0x294 [<ffffff9d49b51fdc>] netlink_sendmsg+0x320/0x390 [<ffffff9d49ae6858>] sock_sendmsg+0x54/0x60 [<ffffff9d49ae6f94>] ___sys_sendmsg+0x298/0x2b0 [<ffffff9d49ae98f8>] SyS_sendmsg+0xb4/0xf0 [<ffffff9d48c83770>] el0_svc_naked+0x24/0x28 Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Fixes: 60d58f971c10 ("net: qualcomm: rmnet: Implement bridge mode") Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-19drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LAKai-Heng Feng1-0/+3
Similar to commit e10aec652f31 ("drm/edid: Add 6 bpc quirk for display AEO model 0."), the EDID reports "DFP 1.x compliant TMDS" but it support 6bpc instead of 8 bpc. Hence, use 6 bpc quirk for this panel. Fixes: 196f954e2509 ("drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"") BugLink: https://bugs.launchpad.net/bugs/1749420 Signed-off-by: Kai-Heng Feng <[email protected]> Reviewed-by: Mario Kleiner <[email protected]> Cc: <[email protected]> # v4.8+ Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-19gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfgJan Luebbe1-0/+2
The 10/12-bit config used for bayer formats is used for grayscale as well. Signed-off-by: Jan Luebbe <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
2018-02-19gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_imagePhilipp Zabel1-0/+1
Add the missing offset calculation for 16-bit grayscale images. Since the IPU only supports capturing greyscale in raw passthrough mode, it is the same as 16-bit bayer formats. Signed-off-by: Philipp Zabel <[email protected]>
2018-02-19gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandleTobias Jordan1-0/+3
Before returning, call of_node_put() for the device node returned by of_parse_phandle(). Fixes: ea9c260514c1 ("gpu: ipu-v3: add driver for Prefetch Resolve Gasket") Signed-off-by: Tobias Jordan <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
2018-02-19gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandleTobias Jordan1-0/+3
Before returning, call of_node_put() for the device node returned by of_parse_phandle(). Fixes: d2a34232580a ("gpu: ipu-v3: add driver for Prefetch Resolve Engine") Signed-off-by: Tobias Jordan <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
2018-02-19arm64: uaccess: Formalise types for access_ok()Robin Murphy3-8/+10
In converting __range_ok() into a static inline, I inadvertently made it more type-safe, but without considering the ordering of the relevant conversions. This leads to quite a lot of Sparse noise about the fact that we use __chk_user_ptr() after addr has already been converted from a user pointer to an unsigned long. Rather than just adding another cast for the sake of shutting Sparse up, it seems reasonable to rework the types to make logical sense (although the resulting codegen for __range_ok() remains identical). The only callers this affects directly are our compat traps where the inferred "user-pointer-ness" of a register value now warrants explicit casting. Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2018-02-19mac80211: Fix sending ADDBA response for an ongoing sessionIlan Peer1-3/+1
In case an ADDBA request is received while there is already an ongoing BA sessions with the same parameters, i.e., update flow, an ADBBA response with decline status was sent twice. Fix it. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-02-19mac80211: Do not disconnect on invalid operating classIlan Peer1-4/+3
Some APs include a non global operating class in their extended channel switch information element. In such a case, as the operating class is not known, mac80211 would decide to disconnect. However the specification states that the operating class needs to be taken from Annex E, but it does not specify from which table it should be taken, so it is valid for an AP to use a non global operating class. To avoid possibly unneeded disconnection, in such a case ignore the operating class and assume that the current band is used, and if the resulting channel and band configuration is invalid disconnect. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-02-19cfg80211: clear wep keys after disconnectionAvraham Stern1-0/+2
When a low level driver calls cfg80211_disconnected(), wep keys are not cleared. As a result, following connection requests will fail since cfg80211 internal state shows a connection is still in progress. Fix this by clearing the wep keys when disconnecting. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-02-19mac80211: fix calling sleeping function in atomic contextSara Sharon1-1/+1
sta_info_alloc can be called from atomic paths (such as RX path) so we need to call pcpu_alloc with the correct gfp. Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU") Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-02-19mac80211: fix a possible leak of station statsSara Sharon1-0/+1
If sta_info_alloc fails after allocating the per CPU statistics, they are not properly freed. Fixes: c9c5962b56c1 ("mac80211: enable collecting station statistics per-CPU") Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-02-19mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4Felix Fietkau1-1/+1
This ensures that mac80211 allocated management frames are properly aligned, which makes copying them more efficient. For instance, mt76 uses iowrite32_copy to copy beacon frames to beacon template memory on the chip. Misaligned 32-bit accesses cause CPU exceptions on MIPS and should be avoided. Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-02-19arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S filesBhupesh Sharma1-1/+1
Since commit e1a50de37860 (arm64: cputype: Silence Sparse warnings), compilation of arm64 architecture is broken with the following error messages: AR arch/arm64/kernel/built-in.o arch/arm64/kernel/head.S: Assembler messages: arch/arm64/kernel/head.S:677: Error: found 'L', expected: ')' arch/arm64/kernel/head.S:677: Error: found 'L', expected: ')' arch/arm64/kernel/head.S:677: Error: found 'L', expected: ')' arch/arm64/kernel/head.S:677: Error: junk at end of line, first unrecognized character is `L' arch/arm64/kernel/head.S:677: Error: unexpected characters following instruction at operand 2 -- `movz x1,:abs_g1_s:0xff00ffffffUL' arch/arm64/kernel/head.S:677: Error: unexpected characters following instruction at operand 2 -- `movk x1,:abs_g0_nc:0xff00ffffffUL' This patch fixes the same by using the UL() macro correctly for assigning the MPIDR_HWID_BITMASK macro value. Fixes: e1a50de37860 ("arm64: cputype: Silence Sparse warnings") Acked-by: Arnd Bergmann <[email protected]> Acked-by: Robin Murphy <[email protected]> Signed-off-by: Bhupesh Sharma <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2018-02-19mac80211_hwsim: don't use WQ_MEM_RECLAIMJohannes Berg1-1/+1
We're obviously not part of a memory reclaim path, so don't set the flag. This also causes a warning in check_flush_dependency() since we end up in a code path that flushes a non-reclaim workqueue, and we shouldn't do that if we were really part of reclaim. Reported-by: [email protected] Signed-off-by: Johannes Berg <[email protected]>
2018-02-19cfg80211: fix cfg80211_beacon_dupArnd Bergmann1-1/+1
gcc-8 warns about some obviously incorrect code: net/mac80211/cfg.c: In function 'cfg80211_beacon_dup': net/mac80211/cfg.c:2896:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] From the context, I conclude that we want to copy from beacon into new_beacon, as we do in the rest of the function. Cc: [email protected] Fixes: 73da7d5bab79 ("mac80211: add channel switch command and beacon callbacks") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-02-18Linux 4.16-rc2Linus Torvalds1-1/+1
2018-02-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 Kconfig fixes from Thomas Gleixner: "Three patchlets to correct HIGHMEM64G and CMPXCHG64 dependencies in Kconfig when CPU selections are explicitely set to M586 or M686" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig x86/Kconfig: Exclude i586-class CPUs lacking PAE support from the HIGHMEM64G Kconfig group x86/Kconfig: Add missing i586-class CPUs to the X86_CMPXCHG64 Kconfig group
2018-02-18Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds34-628/+1195
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Thomas Gleixner: "Perf tool updates and kprobe fixes: - perf_mmap overwrite mode fixes/overhaul, prep work to get 'perf top' using it, making it bearable to use it in large core count systems such as Knights Landing/Mill Intel systems (Kan Liang) - s/390 now uses syscall.tbl, just like x86-64 to generate the syscall table id -> string tables used by 'perf trace' (Hendrik Brueckner) - Use strtoull() instead of home grown function (Andy Shevchenko) - Synchronize kernel ABI headers, v4.16-rc1 (Ingo Molnar) - Document missing 'perf data --force' option (Sangwon Hong) - Add perf vendor JSON metrics for ARM Cortex-A53 Processor (William Cohen) - Improve error handling and error propagation of ftrace based kprobes so failures when installing kprobes are not silently ignored and create disfunctional tracepoints" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) kprobes: Propagate error from disarm_kprobe_ftrace() kprobes: Propagate error from arm_kprobe_ftrace() Revert "tools include s390: Grab a copy of arch/s390/include/uapi/asm/unistd.h" perf s390: Rework system call table creation by using syscall.tbl perf s390: Grab a copy of arch/s390/kernel/syscall/syscall.tbl tools/headers: Synchronize kernel ABI headers, v4.16-rc1 perf test: Fix test trace+probe_libc_inet_pton.sh for s390x perf data: Document missing --force option perf tools: Substitute yet another strtoull() perf top: Check the latency of perf_top__mmap_read() perf top: Switch default mode to overwrite mode perf top: Remove lost events checking perf hists browser: Add parameter to disable lost event warning perf top: Add overwrite fall back perf evsel: Expose the perf_missing_features struct perf top: Check per-event overwrite term perf mmap: Discard legacy interface for mmap read perf test: Update mmap read functions for backward-ring-buffer test perf mmap: Introduce perf_mmap__read_event() perf mmap: Introduce perf_mmap__read_done() ...
2018-02-18Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds11-51/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "A small set of updates mostly for irq chip drivers: - MIPS GIC fix for spurious, masked interrupts - fix for a subtle IPI bug in GICv3 - do not probe GICv3 ITSs that are marked as disabled - multi-MSI support for GICv2m - various small cleanups" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Re-use DEFINE_SHOW_ATTRIBUTE() macro irqchip/bcm: Remove hashed address printing irqchip/gic-v2m: Add PCI Multi-MSI support irqchip/gic-v3: Ignore disabled ITS nodes irqchip/gic-v3: Use wmb() instead of smb_wmb() in gic_raise_softirq() irqchip/gic-v3: Change pr_debug message to pr_devel irqchip/mips-gic: Avoid spuriously handling masked interrupts
2018-02-18Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fix from Thomas Gleixner: "A small fix which adds the missing for_each_cpu_wrap() stub for the UP case to avoid build failures" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpumask: Make for_each_cpu_wrap() available on UP as well
2018-02-17Merge tag 'for-linus-20180217' of git://git.kernel.dk/linux-blockLinus Torvalds9-171/+108
Pull block fixes from Jens Axboe: - NVMe pull request from Keith, with fixes all over the map for nvme. From various folks. - Classic polling fix, that avoids a latency issue where we still end up waiting for an interrupt in some cases. From Nitesh Shetty. - Comment typo fix from Minwoo Im. * tag 'for-linus-20180217' of git://git.kernel.dk/linux-block: block: fix a typo in comment of BLK_MQ_POLL_STATS_BKTS nvme-rdma: fix sysfs invoked reset_ctrl error flow nvmet: Change return code of discard command if not supported nvme-pci: Fix timeouts in connecting state nvme-pci: Remap CMB SQ entries on every controller reset nvme: fix the deadlock in nvme_update_formats blk: optimization for classic polling nvme: Don't use a stack buffer for keep-alive command nvme_fc: cleanup io completion nvme_fc: correct abort race condition on resets nvme: Fix discard buffer overrun nvme: delete NVME_CTRL_LIVE --> NVME_CTRL_CONNECTING transition nvme-rdma: use NVME_CTRL_CONNECTING state to mark init process nvme: rename NVME_CTRL_RECONNECTING state to NVME_CTRL_CONNECTING
2018-02-17Merge tag 'mmc-v4.16-rc1' of ↵Linus Torvalds2-19/+3
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - meson-gx: Revert to earlier tuning process - bcm2835: Don't overwrite max frequency unconditionally * tag 'mmc-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: bcm2835: Don't overwrite max frequency unconditionally Revert "mmc: meson-gx: include tx phase in the tuning process"
2018-02-17Merge tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtdLinus Torvalds2-5/+3
Pull mtd fixes from Boris Brezillon: - add missing dependency to NAND_MARVELL Kconfig entry - use the appropriate OOB layout in the VF610 driver * tag 'mtd/fixes-for-4.16-rc2' of git://git.infradead.org/linux-mtd: mtd: nand: MTD_NAND_MARVELL should depend on HAS_DMA mtd: nand: vf610: set correct ooblayout
2018-02-17Merge tag 'powerpc-4.16-3' of ↵Linus Torvalds5-10/+29
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "The main attraction is a fix for a bug in the new drmem code, which was causing an oops on boot on some versions of Qemu. There's also a fix for XIVE (Power9 interrupt controller) on KVM, as well as a few other minor fixes. Thanks to: Corentin Labbe, Cyril Bur, Cédric Le Goater, Daniel Black, Nathan Fontenot, Nicholas Piggin" * tag 'powerpc-4.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Check for zero filled ibm,dynamic-memory property powerpc/pseries: Add empty update_numa_cpu_lookup_table() for NUMA=n powerpc/powernv: IMC fix out of bounds memory access at shutdown powerpc/xive: Use hw CPU ids when configuring the CPU queues powerpc: Expose TSCR via sysfs only on powernv
2018-02-17Merge tag 'arm64-fixes' of ↵Linus Torvalds17-406/+448
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "The bulk of this is the pte accessors annotation to READ/WRITE_ONCE (we tried to avoid pushing this during the merge window to avoid conflicts) - Updated the page table accessors to use READ/WRITE_ONCE and prevent compiler transformation that could lead to an apparent loss of coherency - Enabled branch predictor hardening for the Falkor CPU - Fix interaction between kpti enabling and KASan causing the recursive page table walking to take a significant time - Fix some sparse warnings" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: cputype: Silence Sparse warnings arm64: mm: Use READ_ONCE/WRITE_ONCE when accessing page tables arm64: proc: Set PTE_NG for table entries to avoid traversing them twice arm64: Add missing Falkor part number for branch predictor hardening
2018-02-17Merge tag 'for-linus-4.16a-rc2-tag' of ↵Linus Torvalds7-114/+101
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - fixes for the Xen pvcalls frontend driver - fix for booting Xen pv domains - fix for the xenbus driver user interface * tag 'for-linus-4.16a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: pvcalls-front: wait for other operations to return when release passive sockets pvcalls-front: introduce a per sock_mapping refcount x86/xen: Calculate __max_logical_packages on PV domains xenbus: track caller request id
2018-02-17iio: buffer: check if a buffer has been set up when poll is calledStefan Windfeldt-Prytz1-1/+1
If no iio buffer has been set up and poll is called return 0. Without this check there will be a null pointer dereference when calling poll on a iio driver without an iio buffer. Cc: [email protected] Signed-off-by: Stefan Windfeldt-Prytz <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2018-02-17iio: adis_lib: Initialize trigger before requesting interruptLars-Peter Clausen1-3/+4
The adis_probe_trigger() creates a new IIO trigger and requests an interrupt associated with the trigger. The interrupt uses the generic iio_trigger_generic_data_rdy_poll() function as its interrupt handler. Currently the driver initializes some fields of the trigger structure after the interrupt has been requested. But an interrupt can fire as soon as it has been requested. This opens up a race condition. iio_trigger_generic_data_rdy_poll() will access the trigger data structure and dereference the ops field. If the ops field is not yet initialized this will result in a NULL pointer deref. It is not expected that the device generates an interrupt at this point, so typically this issue did not surface unless e.g. due to a hardware misconfiguration (wrong interrupt number, wrong polarity, etc.). But some newer devices from the ADIS family start to generate periodic interrupts in their power-on reset configuration and unfortunately the interrupt can not be masked in the device. This makes the race condition much more visible and the following crash has been observed occasionally when booting a system using the ADIS16460. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = c0004000 [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-04126-gf9739f0-dirty #257 Hardware name: Xilinx Zynq Platform task: ef04f640 task.stack: ef050000 PC is at iio_trigger_notify_done+0x30/0x68 LR is at iio_trigger_generic_data_rdy_poll+0x18/0x20 pc : [<c042d868>] lr : [<c042d924>] psr: 60000193 sp : ef051bb8 ip : 00000000 fp : ef106400 r10: c081d80a r9 : ef3bfa00 r8 : 00000087 r7 : ef051bec r6 : 00000000 r5 : ef3bfa00 r4 : ee92ab00 r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : ee97e400 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 18c5387d Table: 0000404a DAC: 00000051 Process swapper/0 (pid: 1, stack limit = 0xef050210) [<c042d868>] (iio_trigger_notify_done) from [<c0065b10>] (__handle_irq_event_percpu+0x88/0x118) [<c0065b10>] (__handle_irq_event_percpu) from [<c0065bbc>] (handle_irq_event_percpu+0x1c/0x58) [<c0065bbc>] (handle_irq_event_percpu) from [<c0065c30>] (handle_irq_event+0x38/0x5c) [<c0065c30>] (handle_irq_event) from [<c0068e28>] (handle_level_irq+0xa4/0x130) [<c0068e28>] (handle_level_irq) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c021ab7c>] (zynq_gpio_irqhandler+0xb8/0x13c) [<c021ab7c>] (zynq_gpio_irqhandler) from [<c0064e74>] (generic_handle_irq+0x24/0x34) [<c0064e74>] (generic_handle_irq) from [<c0065370>] (__handle_domain_irq+0x5c/0xb4) [<c0065370>] (__handle_domain_irq) from [<c000940c>] (gic_handle_irq+0x48/0x8c) [<c000940c>] (gic_handle_irq) from [<c0013e8c>] (__irq_svc+0x6c/0xa8) To fix this make sure that the trigger is fully initialized before requesting the interrupt. Fixes: ccd2b52f4ac6 ("staging:iio: Add common ADIS library") Reported-by: Robin Getz <[email protected]> Signed-off-by: Lars-Peter Clausen <[email protected]> Cc: <[email protected]> Signed-off-by: Jonathan Cameron <[email protected]>
2018-02-17pvcalls-front: wait for other operations to return when release passive socketsStefano Stabellini1-0/+6
Passive sockets can have ongoing operations on them, specifically, we have two wait_event_interruptable calls in pvcalls_front_accept. Add two wake_up calls in pvcalls_front_release, then wait for the potential waiters to return and release the sock_mapping refcount. Signed-off-by: Stefano Stabellini <[email protected]> Acked-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-02-17pvcalls-front: introduce a per sock_mapping refcountStefano Stabellini1-112/+79
Introduce a per sock_mapping refcount, in addition to the existing global refcount. Thanks to the sock_mapping refcount, we can safely wait for it to be 1 in pvcalls_front_release before freeing an active socket, instead of waiting for the global refcount to be 1. Signed-off-by: Stefano Stabellini <[email protected]> Acked-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-02-17x86/xen: Calculate __max_logical_packages on PV domainsPrarit Bhargava3-2/+11
The kernel panics on PV domains because native_smp_cpus_done() is only called for HVM domains. Calculate __max_logical_packages for PV domains. Fixes: b4c0a7326f5d ("x86/smpboot: Fix __max_logical_packages estimate") Signed-off-by: Prarit Bhargava <[email protected]> Tested-and-reported-by: Simon Gaiser <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Cc: Boris Ostrovsky <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Dou Liyang <[email protected]> Cc: Prarit Bhargava <[email protected]> Cc: Kate Stewart <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Vitaly Kuznetsov <[email protected]> Cc: [email protected] Reviewed-by: Boris Ostrovsky <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-02-17xenbus: track caller request idJoao Martins3-0/+5
Commit fd8aa9095a95 ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") optimized xenbus concurrent accesses but in doing so broke UABI of /dev/xen/xenbus. Through /dev/xen/xenbus applications are in charge of xenbus message exchange with the correct header and body. Now, after the mentioned commit the replies received by application will no longer have the header req_id echoed back as it was on request (see specification below for reference), because that particular field is being overwritten by kernel. struct xsd_sockmsg { uint32_t type; /* XS_??? */ uint32_t req_id;/* Request identifier, echoed in daemon's response. */ uint32_t tx_id; /* Transaction id (0 if not related to a transaction). */ uint32_t len; /* Length of data following this. */ /* Generally followed by nul-terminated string(s). */ }; Before there was only one request at a time so req_id could simply be forwarded back and forth. To allow simultaneous requests we need a different req_id for each message thus kernel keeps a monotonic increasing counter for this field and is written on every request irrespective of userspace value. Forwarding again the req_id on userspace requests is not a solution because we would open the possibility of userspace-generated req_id colliding with kernel ones. So this patch instead takes another route which is to artificially keep user req_id while keeping the xenbus logic as is. We do that by saving the original req_id before xs_send(), use the private kernel counter as req_id and then once reply comes and was validated, we restore back the original req_id. Cc: <[email protected]> # 4.11 Fixes: fd8aa9095a ("xen: optimize xenbus driver for multiple concurrent xenstore accesses") Reported-by: Bhavesh Davda <[email protected]> Signed-off-by: Joao Martins <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-02-17arm64: cputype: Silence Sparse warningsRobin Murphy1-1/+1
Sparse makes a fair bit of noise about our MPIDR mask being implicitly long - let's explicitly describe it as such rather than just relying on the value forcing automatic promotion. Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2018-02-16xtensa: support DMA buffers in high memoryMax Filippov1-10/+30
If a DMA buffer is allocated in high memory and kernel mapping is required use dma_common_contiguous_remap to map buffer to the vmalloc region and dma_common_free_remap to unmap it. Signed-off-by: Max Filippov <[email protected]>
2018-02-16drm/amdgpu: Fix deadlock on runtime suspendLukas Wunner1-20/+38
amdgpu's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in amdgpu's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Cc: [email protected] # v4.2+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: [email protected] # v4.2+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Alex Deucher <[email protected]> Tested-by: Mike Lothian <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/4c9bf72aacae1eef062bd134cd112e0770a7f121.1518338789.git.lukas@wunner.de
2018-02-16drm/radeon: Fix deadlock on runtime suspendLukas Wunner1-25/+49
radeon's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in radeon's ->detect hooks, which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if the ->detect hooks are called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Stack trace for posterity: INFO: task kworker/0:3:31847 blocked for more than 120 seconds Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x3c/0x90 rpm_resume+0x1e2/0x690 __pm_runtime_resume+0x3f/0x60 radeon_lvds_detect+0x39/0xf0 [radeon] output_poll_execute+0xda/0x1e0 [drm_kms_helper] process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 INFO: task kworker/2:0:10493 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x3c/0x90 schedule_timeout+0x1b3/0x240 wait_for_common+0xc2/0x180 wait_for_completion+0x1d/0x20 flush_work+0xfc/0x1a0 __cancel_work_timer+0xa5/0x1d0 cancel_delayed_work_sync+0x13/0x20 drm_kms_helper_poll_disable+0x1f/0x30 [drm_kms_helper] radeon_pmops_runtime_suspend+0x3d/0xa0 [radeon] pci_pm_runtime_suspend+0x61/0x1a0 vga_switcheroo_runtime_suspend+0x21/0x70 __rpm_callback+0x32/0x70 rpm_callback+0x24/0x80 rpm_suspend+0x12b/0x640 pm_runtime_work+0x6f/0xb0 process_one_work+0x14b/0x440 worker_thread+0x48/0x4a0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94147 Fixes: 10ebc0bc0934 ("drm/radeon: add runtime PM support (v2)") Cc: [email protected] # v3.13+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: [email protected] # v3.13+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Ismo Toijala <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Dave Airlie <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/64ea02c44f91dda19bc563902b97bbc699040392.1518338789.git.lukas@wunner.de
2018-02-16sctp: remove the left unnecessary check for chunk in sctp_renege_eventsXin Long1-3/+2
Commit fb23403536ea ("sctp: remove the useless check in sctp_renege_events") forgot to remove another check for chunk in sctp_renege_events. Dan found this when doing a static check. This patch is to remove that check, and also to merge two checks into one 'if statement'. Fixes: fb23403536ea ("sctp: remove the useless check in sctp_renege_events") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Xin Long <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Acked-by: Neil Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-16drm/nouveau: Fix deadlock on runtime suspendLukas Wunner1-5/+13
nouveau's ->runtime_suspend hook calls drm_kms_helper_poll_disable(), which waits for the output poll worker to finish if it's running. The output poll worker meanwhile calls pm_runtime_get_sync() in nouveau_connector_detect() which waits for the ongoing suspend to finish, causing a deadlock. Fix by not acquiring a runtime PM ref if nouveau_connector_detect() is called in the output poll worker's context. This is safe because the poll worker is only enabled while runtime active and we know that ->runtime_suspend waits for it to finish. Other contexts calling nouveau_connector_detect() do require a runtime PM ref, these comprise: status_store() drm sysfs interface ->fill_modes drm callback drm_fb_helper_probe_connector_modes() drm_mode_getconnector() nouveau_connector_hotplug() nouveau_display_hpd_work() nv17_tv_set_property() Stack trace for posterity: INFO: task kworker/0:1:58 blocked for more than 120 seconds. Workqueue: events output_poll_execute [drm_kms_helper] Call Trace: schedule+0x28/0x80 rpm_resume+0x107/0x6e0 __pm_runtime_resume+0x47/0x70 nouveau_connector_detect+0x7e/0x4a0 [nouveau] nouveau_connector_detect_lvds+0x132/0x180 [nouveau] drm_helper_probe_detect_ctx+0x85/0xd0 [drm_kms_helper] output_poll_execute+0x11e/0x1c0 [drm_kms_helper] process_one_work+0x184/0x380 worker_thread+0x2e/0x390 INFO: task kworker/0:2:252 blocked for more than 120 seconds. Workqueue: pm pm_runtime_work Call Trace: schedule+0x28/0x80 schedule_timeout+0x1e3/0x370 wait_for_completion+0x123/0x190 flush_work+0x142/0x1c0 nouveau_pmops_runtime_suspend+0x7e/0xd0 [nouveau] pci_pm_runtime_suspend+0x5c/0x180 vga_switcheroo_runtime_suspend+0x1e/0xa0 __rpm_callback+0xc1/0x200 rpm_callback+0x1f/0x70 rpm_suspend+0x13c/0x640 pm_runtime_work+0x6e/0x90 process_one_work+0x184/0x380 worker_thread+0x2e/0x390 Bugzilla: https://bugs.archlinux.org/task/53497 Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=870523 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388#c33 Fixes: 5addcf0a5f0f ("nouveau: add runtime PM support (v0.9)") Cc: [email protected] # v3.12+: 27d4ee03078a: workqueue: Allow retrieval of current task's work struct Cc: [email protected] # v3.12+: 25c058ccaf2e: drm: Allow determining if current task is output poll worker Cc: Ben Skeggs <[email protected]> Cc: Dave Airlie <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/b7d2cbb609a80f59ccabfdf479b9d5907c603ea1.1518338789.git.lukas@wunner.de
2018-02-16drm: Allow determining if current task is output poll workerLukas Wunner2-0/+21
Introduce a helper to determine if the current task is an output poll worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for the output poll worker to finish and the worker in turn calls a ->detect callback which waits for runtime suspend to finish. The ->detect callback is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. v2: Expand kerneldoc to specifically mention deadlock between output poll worker and autosuspend worker as use case. (Lyude) Cc: Dave Airlie <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Alex Deucher <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de
2018-02-16workqueue: Allow retrieval of current task's work structLukas Wunner2-0/+17
Introduce a helper to retrieve the current task's work struct if it is a workqueue worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for a specific worker to finish and that worker in turn calls a function which waits for runtime suspend to finish. That function is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. Cc: Lai Jiangshan <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Alex Deucher <[email protected]> Acked-by: Tejun Heo <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/2d8f603074131eb87e588d2b803a71765bd3a2fd.1518338788.git.lukas@wunner.de
2018-02-16rxrpc: Work around usercopy checkDavid Howells1-2/+3
Due to a check recently added to copy_to_user(), it's now not permitted to copy from slab-held data to userspace unless the slab is whitelisted. This affects rxrpc_recvmsg() when it attempts to place an RXRPC_USER_CALL_ID control message in the userspace control message buffer. A warning is generated by usercopy_warn() because the source is the copy of the user_call_ID retained in the rxrpc_call struct. Work around the issue by copying the user_call_ID to a variable on the stack and passing that to put_cmsg(). The warning generated looks like: Bad or missing usercopy whitelist? Kernel memory exposure attempt detected from SLUB object 'dmaengine-unmap-128' (offset 680, size 8)! WARNING: CPU: 0 PID: 1401 at mm/usercopy.c:81 usercopy_warn+0x7e/0xa0 ... RIP: 0010:usercopy_warn+0x7e/0xa0 ... Call Trace: __check_object_size+0x9c/0x1a0 put_cmsg+0x98/0x120 rxrpc_recvmsg+0x6fc/0x1010 [rxrpc] ? finish_wait+0x80/0x80 ___sys_recvmsg+0xf8/0x240 ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? __clear_rsb+0x25/0x3d ? __clear_rsb+0x15/0x3d ? finish_task_switch+0xa6/0x2b0 ? trace_hardirqs_on_caller+0xed/0x180 ? _raw_spin_unlock_irq+0x29/0x40 ? __sys_recvmsg+0x4e/0x90 __sys_recvmsg+0x4e/0x90 do_syscall_64+0x7a/0x220 entry_SYSCALL_64_after_hwframe+0x26/0x9b Reported-by: Jonathan Billings <[email protected]> Signed-off-by: David Howells <[email protected]> Acked-by: Kees Cook <[email protected]> Tested-by: Jonathan Billings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-16tun: fix tun_napi_alloc_frags() frag allocatorEric Dumazet1-10/+6
<Mark Rutland reported> While fuzzing arm64 v4.16-rc1 with Syzkaller, I've been hitting a misaligned atomic in __skb_clone:         atomic_inc(&(skb_shinfo(skb)->dataref)); where dataref doesn't have the required natural alignment, and the atomic operation faults. e.g. i often see it aligned to a single byte boundary rather than a four byte boundary. AFAICT, the skb_shared_info is misaligned at the instant it's allocated in __napi_alloc_skb() __napi_alloc_skb() </end of report> Problem is caused by tun_napi_alloc_frags() using napi_alloc_frag() with user provided seg sizes, leading to other users of this API getting unaligned page fragments. Since we would like to not necessarily add paddings or alignments to the frags that tun_napi_alloc_frags() attaches to the skb, switch to another page frag allocator. As a bonus skb_page_frag_refill() can use GFP_KERNEL allocations, meaning that we can not deplete memory reserves as easily. Fixes: 90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Mark Rutland <[email protected]> Tested-by: Mark Rutland <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-16udplite: fix partial checksum initializationAlexey Kodanev3-0/+11
Since UDP-Lite is always using checksum, the following path is triggered when calculating pseudo header for it: udp4_csum_init() or udp6_csum_init() skb_checksum_init_zero_check() __skb_checksum_validate_complete() The problem can appear if skb->len is less than CHECKSUM_BREAK. In this particular case __skb_checksum_validate_complete() also invokes __skb_checksum_complete(skb). If UDP-Lite is using partial checksum that covers only part of a packet, the function will return bad checksum and the packet will be dropped. It can be fixed if we skip skb_checksum_init_zero_check() and only set the required pseudo header checksum for UDP-Lite with partial checksum before udp4_csum_init()/udp6_csum_init() functions return. Fixes: ed70fcfcee95 ("net: Call skb_checksum_init in IPv4") Fixes: e4f45b7f40bd ("net: Call skb_checksum_init in IPv6") Signed-off-by: Alexey Kodanev <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-16skbuff: Fix comment mis-spelling.David S. Miller1-1/+1
'peform' --> 'perform' Signed-off-by: David S. Miller <[email protected]>
2018-02-16dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lockPaolo Abeni1-29/+33
After commit 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock only in the required scope"), the caller of nf_{get/set}sockopt() must not hold any lock, but, in such changeset, I forgot to cope with DECnet. This commit addresses the issue moving the nf call outside the lock, in the dn_{get,set}sockopt() with the same schema currently used by ipv4 and ipv6. Also moves the unhandled sockopts of the end of the main switch statements, to improve code readability. Reported-by: Petr Vandrovec <[email protected]> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198791#c2 Fixes: 3f34cfae1238 ("netfilter: on sockopt() acquire sock lock only in the required scope") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-16PCI/cxgb4: Extend T3 PCI quirk to T4+ devicesCasey Leedom2-26/+23
We've run into a problem where our device is attached to a Virtual Machine and the use of the new pci_set_vpd_size() API doesn't help. The VM kernel has been informed that the accesses are okay, but all of the actual VPD Capability Accesses are trapped down into the KVM Hypervisor where it goes ahead and imposes the silent denials. The right idea is to follow the kernel.org commit 1c7de2b4ff88 ("PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)") which Alexey Kardashevskiy authored to establish a PCI Quirk for our T3-based adapters. This commit extends that PCI Quirk to cover Chelsio T4 devices and later. The advantage of this approach is that the VPD Size gets set early in the Base OS/Hypervisor Boot and doesn't require that the cxgb4 driver even be available in the Base OS/Hypervisor. Thus PF4 can be exported to a Virtual Machine and everything should work. Fixes: 67e658794ca1 ("cxgb4: Set VPD size so we can read both VPD structures") Cc: <[email protected]> # v4.9+ Signed-off-by: Casey Leedom <[email protected]> Signed-off-by: Arjun Vynipadath <[email protected]> Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-16cxgb4: fix trailing zero in CIM LA dumpRahul Lakkireddy2-2/+2
Set correct size of the CIM LA dump for T6. Fixes: 27887bc7cb7f ("cxgb4: collect hardware LA dumps") Signed-off-by: Rahul Lakkireddy <[email protected]> Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-16cxgb4: free up resources of pf 0-3Ganesh Goudar1-12/+13
free pf 0-3 resources, commit baf5086840ab ("cxgb4: restructure VF mgmt code") erroneously removed the code which frees the pf 0-3 resources, causing the probe of pf 0-3 to fail in case of driver reload. Fixes: baf5086840ab ("cxgb4: restructure VF mgmt code") Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.