aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-20net/mlx5e: Fix TCP checksum in LRO buffersGal Pressman1-14/+35
When receiving an LRO packet, the checksum field is set by the hardware to the checksum of the first coalesced packet. Obviously, this checksum is not valid for the merged LRO packet and should be fixed. We can use the CQE checksum which covers the checksum of the entire merged packet TCP payload to help us calculate the checksum incrementally. Tested by sending IPv4/6 traffic with LRO enabled, RX checksum disabled and watching nstat checksum error counters (in addition to the obvious bandwidth drop caused by checksum errors). This bug is usually "hidden" since LRO packets would go through the CHECKSUM_UNNECESSARY flow which does not validate the packet checksum. It's important to note that previous to this patch, LRO packets provided with CHECKSUM_UNNECESSARY are indeed packets with a correct validated checksum (even though the checksum inside the TCP header is incorrect), since the hardware LRO aggregation is terminated upon receiving a packet with bad checksum. Fixes: e586b3b0baee ("net/mlx5: Ethernet Datapath files") Signed-off-by: Gal Pressman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2018-02-20tools/libbpf: Avoid possibly using uninitialized variableJeremy Cline1-2/+3
Fixes a GCC maybe-uninitialized warning introduced by 48cca7e44f9f. "text" is only initialized inside the if statement so only print debug info there. Fixes: 48cca7e44f9f ("libbpf: add support for bpf_call") Signed-off-by: Jeremy Cline <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-20ibmvnic: Check for NULL skb's in NAPI poll routineThomas Falcon1-0/+5
After introduction of commit d0869c0071e4, there were some instances of RX queue entries from a previous session (before the device was closed and reopened) returned to the NAPI polling routine. Since the corresponding socket buffers were freed, this resulted in a panic on reopen. Include a check for a NULL skb here to avoid this. Fixes: d0869c0071e4 ("ibmvnic: Clean RX pool buffers during device close") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-20Rename sbi_save to parse_dtb to improve code readabilityMichael Clark2-2/+2
The sbi_ prefix would seem to indicate an SBI interface, and save is not very specific. After applying this patch, reading head.S makes more sense. Signed-off-by: Michael Clark <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-02-20RISC-V: Enable IRQ during exception handling[email protected]1-2/+3
Interrupt is allowed during exception handling. There are warning messages if the kernel enables the configuration 'CONFIG_DEBUG_ATOMIC_SLEEP=y'. BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23 in_atomic(): 0, irqs_disabled(): 1, pid: 43, name: ash CPU: 0 PID: 43 Comm: ash Tainted: G W 4.15.0-rc8-00089-g89ffdae-dirty #17 Call Trace: [<000000009abb1587>] walk_stackframe+0x0/0x7a [<00000000d4f3d088>] ___might_sleep+0x102/0x11a [<00000000b1fd792a>] down_read+0x18/0x28 [<000000000289ec01>] do_page_fault+0x86/0x2f6 [<00000000012441f6>] _do_fork+0x1b4/0x1e0 [<00000000f46c3e3b>] ret_from_syscall+0xa/0xe Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Zong Li <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-02-20RISC-V: kconfig cleanupsPalmer Dabbelt1-3/+0
These three kconfig cleanups were found by ulfalyzer. They're all things we were selecting that were undefined, either because they'd been remove upstream or are part of a future RISC-V submission. * ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE is obselete. * RISCV_IRQ_INTC is the old name for our interrupt controller driver, it'll be changed for the final submission and doesn't exist now. * ARCH_WANT_OPTIONAL_GPIOLIB is obselete.
2018-02-20riscv: Remove ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE selectUlf Magnusson1-1/+0
The ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE symbol was removed in commit 51a021244b9d ("atomic64: no need for CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE"). Remove the ARCH_HAS_ATOMIC64_DEC_IS_POSITIVE select from RISCV. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <[email protected]> Reviewed-by: Jonathan Neuschäfer <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-02-20riscv: kconfig: Remove RISCV_IRQ_INTC selectUlf Magnusson1-1/+0
The RISCV_IRQ_INTC configuration symbol is undefined, but RISCV selects it. Quoting Palmer Dabbelt: It looks like this slipped through, the symbol has been renamed RISCV_INTC. No RISCV_INTC configuration symbol has been merged either. Just remove the RISCV_IRQ_INTC select for now. Signed-off-by: Ulf Magnusson <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-02-20riscv: Remove ARCH_WANT_OPTIONAL_GPIOLIB selectUlf Magnusson1-1/+0
The ARCH_WANT_OPTIONAL_GPIOLIB symbol was removed in commit 65053e1a7743 ("gpio: delete ARCH_[WANTS_OPTIONAL|REQUIRE]_GPIOLIB"). GPIOLIB should just be selected explicitly if needed. Remove the ARCH_WANT_OPTIONAL_GPIOLIB select from RISCV. See commit 0145071b3314 ("x86: Do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") and commit da9a1c6767 ("arm64: do away with ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB") as well. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Ulf Magnusson <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-02-20Merge tag 'leds_for-4.16-rc3' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED maintainer update: "LED update to MAINTAINERS, to admit the reality. Message from Richard: "I've been looking at some of the emails but not needed to be involved for a while now, you're doing fine without me!" [0] Many thanks to Richard for his work as a founder of the LED subsystem!" [0] https://lkml.org/lkml/2018/2/18/145 * tag 'leds_for-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: Remove Richard Purdie from LED maintainers
2018-02-20RDMA/bnxt_re: Avoid system hang during device un-regSelvin Xavier2-5/+4
BNXT_RE_FLAG_TASK_IN_PROG doesn't handle multiple work requests posted together. Track schedule of multiple workqueue items by maintaining a per device counter and proceed with IB dereg only if this counter is zero. flush_workqueue is no longer required from NETDEV_UNREGISTER path. Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-02-20RDMA/bnxt_re: Fix system crash during load/unloadSelvin Xavier1-0/+5
During driver unload, the driver proceeds with cleanup without waiting for the scheduled events. So the device pointers get freed up and driver crashes when the events are scheduled later. Flush the bnxt_re_task work queue before starting device removal. Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-02-20RDMA/bnxt_re: Synchronize destroy_qp with poll_cqSelvin Xavier4-19/+47
Avoid system crash when destroy_qp is invoked while the driver is processing the poll_cq. Synchronize these functions using the cq_lock. Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-02-20RDMA/bnxt_re: Unpin SQ and RQ memory if QP create failsDevesh Sharma1-1/+8
Driver leaves the QP memory pinned if QP create command fails from the FW. Avoids this scenario by adding a proper exit path if the FW command fails. Signed-off-by: Devesh Sharma <[email protected]> Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-02-20RDMA/bnxt_re: Disable atomic capability on bnxt_re adaptersDevesh Sharma2-17/+3
More testing needs to be done before enabling this feature. Disabling the feature temporarily Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2018-02-20MIPS: Drop spurious __unused in struct compat_flockJames Hogan1-1/+0
MIPS' struct compat_flock doesn't match the 32-bit struct flock, as it has an extra short __unused before pad[4], which combined with alignment increases the size to 40 bytes compared with struct flock's 36 bytes. Since commit 8c6657cb50cb ("Switch flock copyin/copyout primitives to copy_{from,to}_user()"), put_compat_flock() writes the full compat_flock struct to userland, which results in corruption of the userland word after the struct flock when running 32-bit userlands on 64-bit kernels. This was observed to cause a bus error exception when starting Firefox on Debian 8 (Jessie). Reported-by: Peter Mamonov <[email protected]> Signed-off-by: James Hogan <[email protected]> Tested-by: Peter Mamonov <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Al Viro <[email protected]> Cc: [email protected] Cc: <[email protected]> # 4.13+ Patchwork: https://patchwork.linux-mips.org/patch/18646/
2018-02-20Revert "usb: musb: host: don't start next rx urb if current one failed"Bin Liu1-7/+1
This reverts commit dbac5d07d13e330e6706813c9fde477140fb5d80. commit dbac5d07d13e ("usb: musb: host: don't start next rx urb if current one failed") along with commit b5801212229f ("usb: musb: host: clear rxcsr error bit if set") try to solve the issue described in [1], but the latter alone is sufficient, and the former causes the issue as in [2], so now revert it. [1] https://marc.info/?l=linux-usb&m=146173995117456&w=2 [2] https://marc.info/?l=linux-usb&m=151689238420622&w=2 Cc: [email protected] # v4.7+ Signed-off-by: Bin Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-20usb: musb: fix enumeration after resumeAndreas Kemnade1-1/+2
On dm3730 there are enumeration problems after resume. Investigation led to the cause that the MUSB_POWER_SOFTCONN bit is not set. If it was set before suspend (because it was enabled via musb_pullup()), it is set in musb_restore_context() so the pullup is enabled. But then musb_start() is called which overwrites MUSB_POWER and therefore disables MUSB_POWER_SOFTCONN, so no pullup is enabled and the device is not enumerated. So let's do a subset of what musb_start() does in the same way as musb_suspend() does it. Platform-specific stuff it still called as there might be some phy-related stuff which needs to be enabled. Also interrupts are enabled, as it was the original idea of calling musb_start() in musb_resume() according to Commit 6fc6f4b87cb3 ("usb: musb: Disable interrupts on suspend, enable them on resume") Signed-off-by: Andreas Kemnade <[email protected]> Tested-by: Tony Lindgren <[email protected]> Signed-off-by: Bin Liu <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-20arm64: perf: correct PMUVer probingMark Rutland1-2/+2
The ID_AA64DFR0_EL1.PMUVer field doesn't follow the usual ID registers scheme. While value 0xf indicates a non-architected PMU is implemented, values 0x1 to 0xe indicate an increasingly featureful architected PMU, as if the field were unsigned. For more details, see ARM DDI 0487C.a, D10.1.4, "Alternative ID scheme used for the Performance Monitors Extension version". Currently, we treat the field as signed, and erroneously bail out for values 0x8 to 0xe. Let's correct that. Signed-off-by: Mark Rutland <[email protected]> Reviewed-by: Robin Murphy <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-20arm_pmu: acpi: request IRQs up-frontMark Rutland4-38/+23
We can't request IRQs in atomic context, so for ACPI systems we'll have to request them up-front, and later associate them with CPUs. This patch reorganises the arm_pmu code to do so. As we no longer have the arm_pmu structure at probe time, a number of prototypes need to be adjusted, requiring changes to the common arm_pmu code and arm_pmu platform code. Signed-off-by: Mark Rutland <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-20arm_pmu: note IRQs and PMUs per-cpuMark Rutland2-18/+52
To support ACPI systems, we need to request IRQs before we know the associated PMU, and thus we need some percpu variable that the IRQ handler can find the PMU from. As we're going to request IRQs without the PMU, we can't rely on the arm_pmu::active_irqs mask, and similarly need to track requested IRQs with a percpu variable. Signed-off-by: Mark Rutland <[email protected]> [will: made armpmu_count_irq_users static] Signed-off-by: Will Deacon <[email protected]>
2018-02-20arm_pmu: explicitly enable/disable SPIs at hotplugMark Rutland1-5/+10
To support ACPI systems, we need to request IRQs before CPUs are hotplugged, and thus we need to request IRQs before we know their associated PMU. This is problematic if a PMU IRQ is pending out of reset, as it may be taken before we know the PMU, and thus the IRQ handler won't be able to handle it, leaving it screaming. To avoid such problems, lets request all IRQs in a disabled state, and explicitly enable/disable them at hotplug time, when we're sure the PMU has been probed. Signed-off-by: Mark Rutland <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-20arm_pmu: acpi: check for mismatched PPIsMark Rutland3-24/+42
The arm_pmu platform code explicitly checks for mismatched PPIs at probe time, while the ACPI code leaves this to the core code. Future refactoring will make this difficult for the core code to check, so let's have the ACPI code check this explicitly. As before, upon a failure we'll continue on without an interrupt. Ho hum. Signed-off-by: Mark Rutland <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-20arm_pmu: add armpmu_alloc_atomic()Mark Rutland3-4/+16
In ACPI systems, we don't know the makeup of CPUs until we hotplug them on, and thus have to allocate the PMU datastructures at hotplug time. Thus, we must use GFP_ATOMIC allocations. Let's add an armpmu_alloc_atomic() that we can use in this case. Signed-off-by: Mark Rutland <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-20arm_pmu: fold platform helpers into platform codeMark Rutland3-23/+21
The armpmu_{request,free}_irqs() helpers are only used by arm_pmu_platform.c, so let's fold them in and make them static. Signed-off-by: Mark Rutland <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-20arm_pmu: kill arm_pmu_platdataMark Rutland2-40/+4
Now that we have no platforms passing platform data to the arm_pmu code, we can get rid of the platdata and associated hooks, paving the way for rework of our IRQ handling. Signed-off-by: Mark Rutland <[email protected]> Cc: Will Deacon <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-20ARM: ux500: remove PMU IRQ bouncerMark Rutland1-35/+0
The ux500 PMU IRQ bouncer is getting in the way of some fundametnal changes to the ARM PMU driver, and it's the only special case that exists today. Let's remove it. Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Mark Rutland <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-20drm/meson: fix vsync buffer updateNeil Armstrong3-4/+12
The plane buffer address/stride/height was incorrectly updated in the plane_atomic_update operation instead of the vsync irq. This patch delays this operation in the vsync irq along with the other plane delayed setup. This issue was masked using legacy framebuffer and X11 modesetting, but is clearly visible using gbm rendering when buffer is submitted late after vblank, like using software decoding and OpenGL rendering in Kodi. With this patch, tearing and other artifacts disappears completely. Cc: Michal Lazo <[email protected]> Fixes: bbbe775ec5b5 ("drm: Add support for Amlogic Meson Graphic Controller") Signed-off-by: Neil Armstrong <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-20Merge tag 'iio-fixes-for-4.16a' of ↵Greg Kroah-Hartman7-21/+35
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First round of IIO fixes for the 4.16 cycle. One nasty very old crash around polling for buffers that aren't there - though that can only cause effects on drivers that support events but not buffers. * buffer / kfifo handling in the core. - Check there is a buffer and return 0 from poll directly if there isn't. Poll doesn't make sense in this circumstances, but best to close the hole. * ad5933 - Change the marked buffer mode to a software buffer as the meaning of the hardware buffer label has long since changed and this uses a front end software buffer anyway. * ad7192 - Fix the fact the external clock frequency was only set when using the internal clock which was less than helpful. * adis_lib - Initialize the trigger before requesting the interrupt. Some newer parts can power up with interrupt generation enabled so ordering now matters. * aspeed-adc - Fix an errror handling path as labels and general ordering were wrong. * srf08 - Fix a link error due to undefined devm_iio_triggered_buffer_setup. * stm32-adc - Fix error handling unwind squence in stm32h7_adc_enable.
2018-02-20drm: Handle unexpected holes in color-evictionChris Wilson1-3/+18
During eviction, the driver may free more than one hole in the drm_mm due to the side-effects in evicting the scanned nodes. However, drm_mm_scan_color_evict() expects that the scan result is the first available hole (in the mru freed hole_stack list): kernel BUG at drivers/gpu/drm/drm_mm.c:844! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: i915 snd_hda_codec_analog snd_hda_codec_generic coretemp snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core lpc_ich snd_pcm e1000e mei_me prime_numbers mei CPU: 1 PID: 1490 Comm: gem_userptr_bli Tainted: G U 4.16.0-rc1-g740f57c54ecf-kasan_6+ #1 Hardware name: Dell Inc. OptiPlex 755 /0PU052, BIOS A08 02/19/2008 RIP: 0010:drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: 0018:ffff880057a573f8 EFLAGS: 00010287 RAX: ffff8800611f5980 RBX: ffff880057a575d0 RCX: dffffc0000000000 RDX: 00000000029d5000 RSI: 1ffff1000af4aec1 RDI: ffff8800611f5a10 RBP: ffff88005ab884d0 R08: ffff880057a57600 R09: 000000000afff000 R10: 1ffff1000b5710b5 R11: 0000000000001000 R12: 1ffff1000af4ae82 R13: ffff8800611f59b0 R14: ffff8800611f5980 R15: ffff880057a57608 FS: 00007f2de0c2e8c0(0000) GS:ffff88006ac40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ddde1e000 CR3: 00000000609b2000 CR4: 00000000000006e0 Call Trace: ? drm_mm_scan_remove_block+0x330/0x330 ? drm_mm_scan_remove_block+0x151/0x330 i915_gem_evict_something+0x711/0xbd0 [i915] ? igt_evict_contexts+0x50/0x50 [i915] ? nop_clear_range+0x10/0x10 [i915] ? igt_evict_something+0x90/0x90 [i915] ? i915_gem_gtt_reserve+0x1a1/0x320 [i915] i915_gem_gtt_insert+0x237/0x400 [i915] __i915_vma_do_pin+0xc25/0x1a20 [i915] eb_lookup_vmas+0x1c63/0x3790 [i915] ? i915_gem_check_execbuffer+0x250/0x250 [i915] ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irqrestore+0x39/0x60 ? __pm_runtime_resume+0x7d/0xf0 i915_gem_do_execbuffer+0x86a/0x2ff0 [i915] ? __kmalloc+0x132/0x340 ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? drm_ioctl_kernel+0x12e/0x1c0 ? drm_ioctl+0x662/0x980 ? eb_relocate_slow+0xa90/0xa90 [i915] ? i915_gem_execbuffer2_ioctl+0x10f/0x760 [i915] ? __might_fault+0xea/0x1a0 i915_gem_execbuffer2_ioctl+0x3cc/0x760 [i915] ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? lock_acquire+0x3c0/0x3c0 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] drm_ioctl_kernel+0x12e/0x1c0 drm_ioctl+0x662/0x980 ? i915_gem_execbuffer_ioctl+0xba0/0xba0 [i915] ? drm_getstats+0x20/0x20 ? debug_check_no_obj_freed+0x2a6/0x8c0 do_vfs_ioctl+0x170/0xe70 ? ioctl_preallocate+0x170/0x170 ? task_work_run+0xbe/0x160 ? lock_acquire+0x3c0/0x3c0 ? trace_hardirqs_on_caller+0x33f/0x590 ? _raw_spin_unlock_irq+0x2f/0x50 SyS_ioctl+0x36/0x70 ? do_vfs_ioctl+0xe70/0xe70 do_syscall_64+0x18c/0x5d0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7f2ddf13b587 RSP: 002b:00007fff15c4f9d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f2ddf13b587 RDX: 00007fff15c4fa20 RSI: 0000000040406469 RDI: 0000000000000003 RBP: 00007fff15c4fa20 R08: 0000000000000000 R09: 00007f2ddf3fe120 R10: 0000000000000073 R11: 0000000000000246 R12: 0000000040406469 R13: 0000000000000003 R14: 00007fff15c4fa20 R15: 00000000000000c7 Code: 00 00 00 4a c7 44 22 08 00 00 00 00 42 c7 44 22 10 00 00 00 00 48 81 c4 b8 00 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 0f 0b 0f 0b <0f> 0b 31 c0 eb c0 4c 89 ef e8 9a 09 41 ff e9 1e fe ff ff 4c 89 RIP: drm_mm_scan_color_evict+0x2b8/0x3d0 RSP: ffff880057a573f8 We can trivially relax this assumption by searching the hole_stack for the scan result and warn instead if the driver called us without any result. Fixes: 3fa489dabea9 ("drm: Apply tight eviction scanning to color_adjust") Signed-off-by: Chris Wilson <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: <[email protected]> # v4.11+ Reviewed-by: Joonas Lahtinen <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-20mei: me: add cannon point device ids for 4th deviceTomas Winkler2-0/+4
Add cannon point device ids for 4th (itouch) device. Cc: <[email protected]> 4.14+ Signed-off-by: Tomas Winkler <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-20mei: me: add cannon point device idsAlexander Usyskin2-0/+6
Add CNP LP and CNP H device ids for cannon lake and coffee lake platforms. Cc: <[email protected]> 4.14+ Signed-off-by: Alexander Usyskin <[email protected]> Signed-off-by: Tomas Winkler <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-02-20Merge tag 'extcon-fixes-for-4.16-rc3' of ↵Greg Kroah-Hartman2-33/+6
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus Chanwoo writes: Update extcon for v4.16-rc3 This patch fixes issue of X-power extcon-axp288 and Intel extcon-int3496 driver. - For extcon-int3496 driver, Process id-pin first so that we start with the right status in order to fix a race where the initial work might still be running while other drivers were already calling extcon_get_state(). - For extcon-axp288 driver, Revert the patch[1] which were applied to v4.16-rc1 because there are better ways with usb-role-switch and constify the axp288_pwr_up_down_info array. [1] 60ed99961469a3 ("extcon: axp288: Redo charger type detection a couple of seconds after probe()")
2018-02-20x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>KarimAllah Ahmed1-9/+9
... since u64 has a hidden header dependency that was not there before using it (i.e. it breaks our VMM build). Also, __u64 is the right way to expose data types through UAPI. Signed-off-by: KarimAllah Ahmed <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: Haiyang Zhang <[email protected]> Cc: K. Y. Srinivasan <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephen Hemminger <[email protected]> Cc: [email protected] Fixes: 93286261 ("x86/hyperv: Reenlightenment notifications support") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-20drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1Sylwester Nawrocki2-3/+6
Bit field [2:0] of HDMI_I2S_PIN_SEL_1 corresponds to SDATA_0, not SDATA_2. This patch removes redefinition of HDMI_I2S_SEL_DATA2 constant and adds missing HDMI_I2S_SEL_DATA0. The value of bit field selecting SDATA_1 (pin_sel_3) is also changed, so it is 3 as suggested in the Exynos TRMs. Signed-off-by: Sylwester Nawrocki <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-02-20drm/exynos: remove exynos_drm_rotator.hCorentin Labbe1-19/+0
Since its inclusion in 2012 via commit bea8a429d91a ("drm/exynos: add rotator ipp driver") this header is not used by any source files and is empty. Lets just remove it. Signed-off-by: Corentin Labbe <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-02-20drm/exynos: g2d: Delete an error message for a failed memory allocation in ↵Markus Elfring1-4/+2
two functions Omit an extra message for a memory allocation failure in these functions. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-02-20drm/exynos: fix comparison to bitshift when dealing with a maskWolfram Sang1-1/+1
Due to a typo, the mask was destroyed by a comparison instead of a bit shift. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-02-20drm/exynos: g2d: use monotonic timestampsArnd Bergmann1-3/+3
The exynos DRM driver uses real-time 'struct timeval' values for exporting its timestamps to user space. This has multiple problems: 1. signed seconds overflow in y2038 2. the 'struct timeval' definition is deprecated in the kernel 3. time may jump or go backwards after a 'settimeofday()' syscall 4. other DRM timestamps are in CLOCK_MONOTONIC domain, so they can't be compared 5. exporting microseconds requires a division by 1000, which may be slow on some architectures. The code existed in two places before, but the IPP portion was removed in 8ded59413ccc ("drm/exynos: ipp: Remove Exynos DRM IPP subsystem"), so we no longer need to worry about it. Ideally timestamps should just use 64-bit nanoseconds instead, but of course we can't change that now. Instead, this tries to address the first four points above by using monotonic 'timespec' values. According to Tobias Jakobi, user space doesn't care about the timestamp at the moment, so we can change the format. Even if there is something looking at them, it will work just fine with monotonic times as long as the application only looks at the relative values between two events. Link: https://patchwork.kernel.org/patch/10038593/ Cc: Tobias Jakobi <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Tobias Jakobi <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2018-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds52-395/+504
Pull networking fixes from David Miller: 1) Prevent index integer overflow in ptr_ring, from Jason Wang. 2) Program mvpp2 multicast filter properly, from Mikulas Patocka. 3) The bridge brport attribute file is write only and doesn't have a ->show() method, don't blindly invoke it. From Xin Long. 4) Inverted mask used in genphy_setup_forced(), from Ingo van Lil. 5) Fix multiple definition issue with if_ether.h UAPI header, from Hauke Mehrtens. 6) Fix GFP_KERNEL usage in atomic in RDS protocol code, from Sowmini Varadhan. 7) Revert XDP redirect support from thunderx driver, it is not implemented properly. From Jesper Dangaard Brouer. 8) Fix missing RTNL protection across some tipc operations, from Ying Xue. 9) Return the correct IV bytes in the TLS getsockopt code, from Boris Pismenny. 10) Take tclassid into consideration properly when doing FIB rule matching. From Stefano Brivio. 11) cxgb4 device needs more PCI VPD quirks, from Casey Leedom. 12) TUN driver doesn't align frags properly, and we can end up doing unaligned atomics on misaligned metadata. From Eric Dumazet. 13) Fix various crashes found using DEBUG_PREEMPT in rmnet driver, from Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) tg3: APE heartbeat changes mlxsw: spectrum_router: Do not unconditionally clear route offload indication net: qualcomm: rmnet: Fix possible null dereference in command processing net: qualcomm: rmnet: Fix warning seen with 64 bit stats net: qualcomm: rmnet: Fix crash on real dev unregistration sctp: remove the left unnecessary check for chunk in sctp_renege_events rxrpc: Work around usercopy check tun: fix tun_napi_alloc_frags() frag allocator udplite: fix partial checksum initialization skbuff: Fix comment mis-spelling. dn_getsockoptdecnet: move nf_{get/set}sockopt outside sock lock PCI/cxgb4: Extend T3 PCI quirk to T4+ devices cxgb4: fix trailing zero in CIM LA dump cxgb4: free up resources of pf 0-3 fib_semantics: Don't match route with mismatching tclassid NFC: llcp: Limit size of SDP URI tls: getsockopt return record sequence number tls: reset the crypto info if copy_from_user fails tls: retrun the correct IV in getsockopt docs: segmentation-offloads.txt: add SCTP info ...
2018-02-19MAINTAINERS: Remove Richard Purdie from LED maintainersJacek Anaszewski1-1/+0
Richard has been inactive on the linux-leds list for a long time. After email discussion we agreed on removing him from the LED maintainers, which will better reflect the actual status. Acked-by: Richard Purdie <[email protected]> Signed-off-by: Jacek Anaszewski <[email protected]>
2018-02-19tg3: APE heartbeat changesPrashant Sreedharan2-11/+29
In ungraceful host shutdown or driver crash case BMC connectivity is lost. APE firmware is missing the driver state in this case to keep the BMC connectivity alive. This patch has below change to address this issue. Heartbeat mechanism with APE firmware. This heartbeat mechanism is needed to notify the APE firmware about driver state. This patch also has the change in wait time for APE event from 1ms to 20ms as there can be some delay in getting response. v2: Drop inline keyword as per David suggestion. Signed-off-by: Prashant Sreedharan <[email protected]> Signed-off-by: Satish Baddipadige <[email protected]> Signed-off-by: Siva Reddy Kallam <[email protected]> Acked-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-19netfilter: IDLETIMER: be syzkaller friendlyEric Dumazet1-3/+6
We had one report from syzkaller [1] First issue is that INIT_WORK() should be done before mod_timer() or we risk timer being fired too soon, even with a 1 second timer. Second issue is that we need to reject too big info->timeout to avoid overflows in msecs_to_jiffies(info->timeout * 1000), or risk looping, if result after overflow is 0. [1] WARNING: CPU: 1 PID: 5129 at kernel/workqueue.c:1444 __queue_work+0xdf4/0x1230 kernel/workqueue.c:1444 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 5129 Comm: syzkaller159866 Not tainted 4.16.0-rc1+ #230 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1dc/0x200 kernel/panic.c:547 report_bug+0x211/0x2d0 lib/bug.c:184 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178 fixup_bug arch/x86/kernel/traps.c:247 [inline] do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x22/0x40 arch/x86/entry/entry_64.S:988 RIP: 0010:__queue_work+0xdf4/0x1230 kernel/workqueue.c:1444 RSP: 0018:ffff8801db507538 EFLAGS: 00010006 RAX: ffff8801aeb46080 RBX: ffff8801db530200 RCX: ffffffff81481404 RDX: 0000000000000100 RSI: ffffffff86b42640 RDI: 0000000000000082 RBP: ffff8801db507758 R08: 1ffff1003b6a0de5 R09: 000000000000000c R10: ffff8801db5073f0 R11: 0000000000000020 R12: 1ffff1003b6a0eb6 R13: ffff8801b1067ae0 R14: 00000000000001f8 R15: dffffc0000000000 queue_work_on+0x16a/0x1c0 kernel/workqueue.c:1488 queue_work include/linux/workqueue.h:488 [inline] schedule_work include/linux/workqueue.h:546 [inline] idletimer_tg_expired+0x44/0x60 net/netfilter/xt_IDLETIMER.c:116 call_timer_fn+0x228/0x820 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x7ee/0xb70 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2d7/0xb85 kernel/softirq.c:285 invoke_softirq kernel/softirq.c:365 [inline] irq_exit+0x1cc/0x200 kernel/softirq.c:405 exiting_irq arch/x86/include/asm/apic.h:541 [inline] smp_apic_timer_interrupt+0x16b/0x700 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xa9/0xb0 arch/x86/entry/entry_64.S:829 </IRQ> RIP: 0010:arch_local_irq_restore arch/x86/include/asm/paravirt.h:777 [inline] RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0x5e/0xba kernel/locking/spinlock.c:184 RSP: 0018:ffff8801c20173c8 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff12 RAX: dffffc0000000000 RBX: 0000000000000282 RCX: 0000000000000006 RDX: 1ffffffff0d592cd RSI: 1ffff10035d68d23 RDI: 0000000000000282 RBP: ffff8801c20173d8 R08: 1ffff10038402e47 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff8820e5c8 R13: ffff8801b1067ad8 R14: ffff8801aea7c268 R15: ffff8801aea7c278 __debug_object_init+0x235/0x1040 lib/debugobjects.c:378 debug_object_init+0x17/0x20 lib/debugobjects.c:391 __init_work+0x2b/0x60 kernel/workqueue.c:506 idletimer_tg_create net/netfilter/xt_IDLETIMER.c:152 [inline] idletimer_tg_checkentry+0x691/0xb00 net/netfilter/xt_IDLETIMER.c:213 xt_check_target+0x22c/0x7d0 net/netfilter/x_tables.c:850 check_target net/ipv6/netfilter/ip6_tables.c:533 [inline] find_check_entry.isra.7+0x935/0xcf0 net/ipv6/netfilter/ip6_tables.c:575 translate_table+0xf52/0x1690 net/ipv6/netfilter/ip6_tables.c:744 do_replace net/ipv6/netfilter/ip6_tables.c:1160 [inline] do_ip6t_set_ctl+0x370/0x5f0 net/ipv6/netfilter/ip6_tables.c:1686 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x67/0xc0 net/netfilter/nf_sockopt.c:115 ipv6_setsockopt+0x10b/0x130 net/ipv6/ipv6_sockglue.c:927 udpv6_setsockopt+0x45/0x80 net/ipv6/udp.c:1422 sock_common_setsockopt+0x95/0xd0 net/core/sock.c:2976 SYSC_setsockopt net/socket.c:1850 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1829 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzkaller <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-19arm64: __show_regs: Only resolve kernel symbols when running at EL1Will Deacon1-2/+9
__show_regs pretty prints PC and LR by attempting to map them to kernel function names to improve the utility of crash reports. Unfortunately, this mapping is applied even when the pt_regs corresponds to user mode, resulting in a KASLR oracle. Avoid this issue by only looking up the function symbols when the register state indicates that we're actually running at EL1. Cc: <[email protected]> Reported-by: NCSC Security <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-19arm64: Remove unimplemented syscall log messageMichael Weiser1-8/+0
Stop printing a (ratelimited) kernel message for each instance of an unimplemented syscall being called. Userland making an unimplemented syscall is not necessarily misbehaviour and to be expected with a current userland running on an older kernel. Also, the current message looks scary to users but does not actually indicate a real problem nor help them narrow down the cause. Just rely on sys_ni_syscall() to return -ENOSYS. Cc: <[email protected]> Acked-by: Will Deacon <[email protected]> Signed-off-by: Michael Weiser <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-19arm64: Disable unhandled signal log messages by defaultMichael Weiser1-1/+1
aarch64 unhandled signal kernel messages are very verbose, suggesting them to be more of a debugging aid: sigsegv[33]: unhandled level 2 translation fault (11) at 0x00000000, esr 0x92000046, in sigsegv[400000+71000] CPU: 1 PID: 33 Comm: sigsegv Tainted: G W 4.15.0-rc3+ #3 Hardware name: linux,dummy-virt (DT) pstate: 60000000 (nZCv daif -PAN -UAO) pc : 0x4003f4 lr : 0x4006bc sp : 0000fffffe94a060 x29: 0000fffffe94a070 x28: 0000000000000000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 00000000004001b0 x23: 0000000000486ac8 x22: 00000000004001c8 x21: 0000000000000000 x20: 0000000000400be8 x19: 0000000000400b30 x18: 0000000000484728 x17: 000000000865ffc8 x16: 000000000000270f x15: 00000000000000b0 x14: 0000000000000002 x13: 0000000000000001 x12: 0000000000000000 x11: 0000000000000000 x10: 0008000020008008 x9 : 000000000000000f x8 : ffffffffffffffff x7 : 0004000000000000 x6 : ffffffffffffffff x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000004003e4 x2 : 0000fffffe94a1e8 x1 : 000000000000000a x0 : 0000000000000000 Disable them by default, so they can be enabled using /proc/sys/debug/exception-trace. Cc: <[email protected]> Signed-off-by: Michael Weiser <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2018-02-19arm64: cpufeature: Fix CTR_EL0 field definitionsWill Deacon1-2/+4
Our field definitions for CTR_EL0 suffer from a number of problems: - The IDC and DIC fields are missing, which causes us to enable CTR trapping on CPUs with either of these returning non-zero values. - The ERG is FTR_LOWER_SAFE, whereas it should be treated like CWG as FTR_HIGHER_SAFE so that applications can use it to avoid false sharing. - [nit] A RES1 field is described as "RAO" This patch updates the CTR_EL0 field definitions to fix these issues. Cc: <[email protected]> Cc: Shanker Donthineni <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2018-02-19mlxsw: spectrum_router: Do not unconditionally clear route offload indicationIdo Schimmel1-0/+3
When mlxsw replaces (or deletes) a route it removes the offload indication from the replaced route. This is problematic for IPv4 routes, as the offload indication is stored in the fib_info which is usually shared between multiple routes. Instead of unconditionally clearing the offload indication, only clear it if no other route is using the fib_info. Fixes: 3984d1a89fe7 ("mlxsw: spectrum_router: Provide offload indication using nexthop flags") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Alexander Petrovskiy <[email protected]> Tested-by: Alexander Petrovskiy <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-19Merge branch 'qualcomm-rmnet-Fix-issues-with-CONFIG_DEBUG_PREEMPT-enabled'David S. Miller3-55/+20
Subash Abhinov Kasiviswanathan says: ==================== net: qualcomm: rmnet: Fix issues with CONFIG_DEBUG_PREEMPT enabled Patch 1 and 2 fixes issues identified when CONFIG_DEBUG_PREEMPT was enabled. These involve APIs which were called in invalid contexts. Patch 3 is a null derefence fix identified by code inspection. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-19net: qualcomm: rmnet: Fix possible null dereference in command processingSubash Abhinov Kasiviswanathan1-0/+5
If a command packet with invalid mux id is received, the packet would not have a valid endpoint. This invalid endpoint maybe dereferenced leading to a crash. Identified by manual code inspection. Fixes: 3352e6c45760 ("net: qualcomm: rmnet: Convert the muxed endpoint to hlist") Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.