aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-01-16net/mlx4_core: Eliminate warning messages for SRQ_LIMIT under SRIOVJack Morgenstein1-9/+14
When running SRIOV, warnings for SRQ LIMIT events flood the Hypervisor's message log when (correct, normally operating) apps use SRQ LIMIT events as a trigger to post WQEs to SRQs. Add more information to the existing debug printout for SRQ_LIMIT, and output the warning messages only for the SRQ CATAS ERROR event. Fixes: acba2420f9d2 ("mlx4_core: Add wrapper functions and comm channel and slave event support to EQs") Fixes: e0debf9cb50d ("mlx4_core: Reduce warning message for SRQ_LIMIT event to debug level") Signed-off-by: Jack Morgenstein <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16net/mlx4_core: Fix when to save some qp context flags for dynamic VST to VGT ↵Jack Morgenstein1-2/+3
transitions Save the qp context flags byte containing the flag disabling vlan stripping in the RESET to INIT qp transition, rather than in the INIT to RTR transition. Per the firmware spec, the flags in this byte are active in the RESET to INIT transition. As a result of saving the flags in the incorrect qp transition, when switching dynamically from VGT to VST and back to VGT, the vlan remained stripped (as is required for VST) and did not return to not-stripped (as is required for VGT). Fixes: f0f829bf42cd ("net/mlx4_core: Add immediate activate for VGT->VST->VGT") Signed-off-by: Jack Morgenstein <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16net/mlx4_core: Fix racy CQ (Completion Queue) freeJack Morgenstein1-18/+20
In function mlx4_cq_completion() and mlx4_cq_event(), the radix_tree_lookup requires a rcu_read_lock. This is mandatory: if another core frees the CQ, it could run the radix_tree_node_rcu_free() call_rcu() callback while its being used by the radix tree lookup function. Additionally, in function mlx4_cq_event(), since we are adding the rcu lock around the radix-tree lookup, we no longer need to take the spinlock. Also, the synchronize_irq() call for the async event eliminates the need for incrementing the cq reference count in mlx4_cq_event(). Other changes: 1. In function mlx4_cq_free(), replace spin_lock_irq with spin_lock: we no longer take this spinlock in the interrupt context. The spinlock here, therefore, simply protects against different threads simultaneously invoking mlx4_cq_free() for different cq's. 2. In function mlx4_cq_free(), we move the radix tree delete to before the synchronize_irq() calls. This guarantees that we will not access this cq during any subsequent interrupts, and therefore can safely free the CQ after the synchronize_irq calls. The rcu_read_lock in the interrupt handlers only needs to protect against corrupting the radix tree; the interrupt handlers may access the cq outside the rcu_read_lock due to the synchronize_irq calls which protect against premature freeing of the cq. 3. In function mlx4_cq_event(), we change the mlx_warn message to mlx4_dbg. 4. We leave the cq reference count mechanism in place, because it is still needed for the cq completion tasklet mechanism. Fixes: 6d90aa5cf17b ("net/mlx4_core: Make sure there are no pending async events when freeing CQ") Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Jack Morgenstein <[email protected]> Signed-off-by: Matan Barak <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16net: stmmac: don't use netdev_[dbg, info, ..] before net_device is registeredHeiner Kallweit1-9/+10
Don't use netdev_info and friends before the net_device is registered. This avoids ugly messages like "meson8b-dwmac c9410000.ethernet (unnamed net_device) (uninitialized): Enable RX Mitigation via HW Watchdog Timer" Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16net/mlx5e: Fix a -Wmaybe-uninitialized warningArnd Bergmann1-4/+7
As found by Olof's build bot, we gain a harmless warning about a potential uninitialized variable reference in mlx5: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c: In function 'parse_tc_fdb_actions': drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:769:13: warning: 'out_dev' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:811:21: note: 'out_dev' was declared here This was introduced through the addition of an 'IS_ERR/PTR_ERR' pair that gcc is unfortunately unable to completely figure out. The problem being gcc cannot tell that if(IS_ERR()) in mlx5e_route_lookup_ipv4() is equivalent to checking if(err) later, so it assumes that 'out_dev' is used after the 'return PTR_ERR(rt)'. The PTR_ERR_OR_ZERO() case by comparison is fairly easy to detect by gcc, so it can't get that wrong, so it no longer warns. Hadar Hen Zion already attempted to fix the warning earlier by adding fake initializations, but that ended up not fully addressing all warnings, so I'm reverting it now that it is no longer needed. Link: http://arm-soc.lixom.net/buildlogs/mainline/v4.10-rc3-98-gcff3b2c/ Fixes: a42485eb0ee4 ("net/mlx5e: TC ipv4 tunnel encap offload error flow fixes") Fixes: a757d108dc1a ("net/mlx5e: Fix kbuild warnings for uninitialized parameters") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16ax25: Fix segfault after sock connection timeoutBasil Gunn1-1/+1
The ax.25 socket connection timed out & the sock struct has been previously taken down ie. sock struct is now a NULL pointer. Checking the sock_flag causes the segfault. Check if the socket struct pointer is NULL before checking sock_flag. This segfault is seen in timed out netrom connections. Please submit to -stable. Signed-off-by: Basil Gunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16bpf: rework prog_digest into prog_tagDaniel Borkmann9-21/+24
Commit 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") was recently discussed, partially due to admittedly suboptimal name of "prog_digest" in combination with sha1 hash usage, thus inevitably and rightfully concerns about its security in terms of collision resistance were raised with regards to use-cases. The intended use cases are for debugging resp. introspection only for providing a stable "tag" over the instruction sequence that both kernel and user space can calculate independently. It's not usable at all for making a security relevant decision. So collisions where two different instruction sequences generate the same tag can happen, but ideally at a rather low rate. The "tag" will be dumped in hex and is short enough to introspect in tracepoints or kallsyms output along with other data such as stack trace, etc. Thus, this patch performs a rename into prog_tag and truncates the tag to a short output (64 bits) to make it obvious it's not collision-free. Should in future a hash or facility be needed with a security relevant focus, then we can think about requirements, constraints, etc that would fit to that situation. For now, rework the exposed parts for the current use cases as long as nothing has been released yet. Tested on x86_64 and s390x. Fixes: 7bd509e311f4 ("bpf: add prog_digest and expose it via fdinfo/netlink") Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Cc: Andy Lutomirski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16tipc: allocate user memory with GFP_KERNEL flagParthasarathy Bhuvaragan5-13/+13
Until now, we allocate memory always with GFP_ATOMIC flag. When the system is under memory pressure and a user tries to send, the send fails due to low memory. However, the user application can wait for free memory if we allocate it using GFP_KERNEL flag. In this commit, we use allocate memory with GFP_KERNEL for all user allocation. Reported-by: Rune Torgersen <[email protected]> Acked-by: Jon Maloy <[email protected]> Signed-off-by: Parthasarathy Bhuvaragan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16net: phy: dp83867: allow RGMII_TXID/RGMII_RXID interface typesKaricheri, Muralidharan2-4/+10
Currently dp83867 driver returns error if phy interface type PHY_INTERFACE_MODE_RGMII_RXID is used to set the rx only internal delay. Similarly issue happens for PHY_INTERFACE_MODE_RGMII_TXID. Fix this by checking also the interface type if a particular delay value is missing in the phy dt bindings. Also update the DT document accordingly. Signed-off-by: Murali Karicheri <[email protected]> Signed-off-by: Sekhar Nori <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16ip6_tunnel: Account for tunnel header in tunnel MTUJakub Sitnicki1-2/+2
With ip6gre we have a tunnel header which also makes the tunnel MTU smaller. We need to reserve room for it. Previously we were using up space reserved for the Tunnel Encapsulation Limit option header (RFC 2473). Also, after commit b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") our contract with the caller has changed. Now we check if the packet length exceeds the tunnel MTU after the tunnel header has been pushed, unlike before. This is reflected in the check where we look at the packet length minus the size of the tunnel header, which is already accounted for in tunnel MTU. Fixes: b05229f44228 ("gre6: Cleanup GREv6 transmit path, call common GRE functions") Signed-off-by: Jakub Sitnicki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16mld: do not remove mld souce list info when set link downHangbin Liu1-21/+30
This is an IPv6 version of commit 24803f38a5c0 ("igmp: do not remove igmp souce list..."). In mld_del_delrec(), we will restore back all source filter info instead of flush them. Move mld_clear_delrec() from ipv6_mc_down() to ipv6_mc_destroy_dev() since we should not remove source list info when set link down. Remove igmp6_group_dropped() in ipv6_mc_destroy_dev() since we have called it in ipv6_mc_down(). Also clear all source info after igmp6_group_dropped() instead of in it because ipv6_mc_down() will call igmp6_group_dropped(). Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16Merge tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds5-7/+12
Pull nfsd fixes from Bruce Fields: "Miscellaneous nfsd bugfixes, one for a 4.10 regression, three for older bugs" * tag 'nfsd-4.10-1' of git://linux-nfs.org/~bfields/linux: svcrdma: avoid duplicate dma unmapping during error recovery sunrpc: don't call sleeping functions from the notifier block callbacks svcrpc: don't leak contexts on PROC_DESTROY nfsd: fix supported attributes for acl & labels
2017-01-16be2net: fix MAC addr setting on privileged BE3 VFsIvan Vecera1-2/+10
During interface opening MAC address stored in netdev->dev_addr is programmed in the HW with exception of BE3 VFs where the initial MAC is programmed by parent PF. This is OK when MAC address is not changed when an interfaces is down. In this case the requested MAC is stored to netdev->dev_addr and later is stored into HW during opening. But this is not done for all BE3 VFs so the NIC HW does not know anything about this change and all traffic is filtered. This is the case of bonding if fail_over_mac == 0 where the MACs of the slaves are changed while they are down. The be2net behavior is too restrictive because if a BE3 VF has the FILTMGMT privilege then it is able to modify its MAC without any restriction. To solve the described problem the driver should take care about these privileged BE3 VFs so the MAC is programmed during opening. And by contrast unpriviled BE3 VFs should not be allowed to change its MAC in any case. Cc: Sathya Perla <[email protected]> Cc: Ajit Khaparde <[email protected]> Cc: Sriharsha Basavapatna <[email protected]> Cc: Somnath Kotur <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16be2net: don't delete MAC on close on unprivileged BE3 VFsIvan Vecera1-1/+5
BE3 VFs without FILTMGMT privilege are not allowed to modify its MAC, VLAN table and UC/MC lists. So don't try to delete MAC on such VFs. Cc: Sathya Perla <[email protected]> Cc: Ajit Khaparde <[email protected]> Cc: Sriharsha Basavapatna <[email protected]> Cc: Somnath Kotur <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16be2net: fix status check in be_cmd_pmac_add()Ivan Vecera1-1/+1
Return value from be_mcc_notify_wait() contains a base completion status together with an additional status. The base_status() macro need to be used to access base status. Fixes: e3a7ae2 be2net: Changing MAC Address of a VF was broken Cc: Sathya Perla <[email protected]> Cc: Ajit Khaparde <[email protected]> Cc: Sriharsha Basavapatna <[email protected]> Cc: Somnath Kotur <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16cpmac: remove hopeless #warningArnd Bergmann1-1/+1
The #warning was present 10 years ago when the driver first got merged. As the platform is rather obsolete by now, it seems very unlikely that the warning will cause anyone to fix the code properly. kernelci.org reports the warning for every build in the meantime, so I think it's better to just turn it into a code comment to reduce noise. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16ravb: do not use zero-length alignment DMA descriptorMasaru Nagai1-0/+13
Due to alignment requirements of the hardware transmissions are split into two DMA descriptors, a small padding descriptor of 0 - 3 bytes in length followed by a descriptor for rest of the packet. In the case of IP packets the first descriptor will never be zero due to the way that the stack aligns buffers for IP packets. However, for non-IP packets it may be zero. In that case it has been reported that timeouts occur, presumably because transmission stops at the first zero-length DMA descriptor and thus the packet is not transmitted. However, in my environment a BUG is triggered as follows: [ 20.381417] ------------[ cut here ]------------ [ 20.386054] kernel BUG at lib/swiotlb.c:495! [ 20.390324] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 20.395805] Modules linked in: [ 20.398862] CPU: 0 PID: 2089 Comm: mz Not tainted 4.10.0-rc3-00001-gf13ad2db193f #162 [ 20.406689] Hardware name: Renesas Salvator-X board based on r8a7796 (DT) [ 20.413474] task: ffff80063b1f1900 task.stack: ffff80063a71c000 [ 20.419404] PC is at swiotlb_tbl_map_single+0x178/0x2ec [ 20.424625] LR is at map_single+0x4c/0x98 [ 20.428629] pc : [<ffff00000839c4c0>] lr : [<ffff00000839c680>] pstate: 800001c5 [ 20.436019] sp : ffff80063a71f9b0 [ 20.439327] x29: ffff80063a71f9b0 x28: ffff80063a20d500 [ 20.444636] x27: ffff000008ed5000 x26: 0000000000000000 [ 20.449944] x25: 000000067abe2adc x24: 0000000000000000 [ 20.455252] x23: 0000000000200000 x22: 0000000000000001 [ 20.460559] x21: 0000000000175ffe x20: ffff80063b2a0010 [ 20.465866] x19: 0000000000000000 x18: 0000ffffcae6fb20 [ 20.471173] x17: 0000ffffa09ba018 x16: ffff0000087c8b70 [ 20.476480] x15: 0000ffffa084f588 x14: 0000ffffa09cfa14 [ 20.481787] x13: 0000ffffcae87ff0 x12: 000000000063abe2 [ 20.487098] x11: ffff000008096360 x10: ffff80063abe2adc [ 20.492407] x9 : 0000000000000000 x8 : 0000000000000000 [ 20.497718] x7 : 0000000000000000 x6 : ffff000008ed50d0 [ 20.503028] x5 : 0000000000000000 x4 : 0000000000000001 [ 20.508338] x3 : 0000000000000000 x2 : 000000067abe2adc [ 20.513648] x1 : 00000000bafff000 x0 : 0000000000000000 [ 20.518958] [ 20.520446] Process mz (pid: 2089, stack limit = 0xffff80063a71c000) [ 20.526798] Stack: (0xffff80063a71f9b0 to 0xffff80063a720000) [ 20.532543] f9a0: ffff80063a71fa30 ffff00000839c680 [ 20.540374] f9c0: ffff80063b2a0010 ffff80063b2a0010 0000000000000001 0000000000000000 [ 20.548204] f9e0: 000000000000006e ffff80063b23c000 ffff80063b23c000 0000000000000000 [ 20.556034] fa00: ffff80063b23c000 ffff80063a20d500 000000013b1f1900 0000000000000000 [ 20.563864] fa20: ffff80063ffd18e0 ffff80063b2a0010 ffff80063a71fa60 ffff00000839cd10 [ 20.571694] fa40: ffff80063b2a0010 0000000000000000 ffff80063ffd18e0 000000067abe2adc [ 20.579524] fa60: ffff80063a71fa90 ffff000008096380 ffff80063b2a0010 0000000000000000 [ 20.587353] fa80: 0000000000000000 0000000000000001 ffff80063a71fac0 ffff00000864f770 [ 20.595184] faa0: ffff80063b23caf0 0000000000000000 0000000000000000 0000000000000140 [ 20.603014] fac0: ffff80063a71fb60 ffff0000087e6498 ffff80063a20d500 ffff80063b23c000 [ 20.610843] fae0: 0000000000000000 ffff000008daeaf0 0000000000000000 ffff000008daeb00 [ 20.618673] fb00: ffff80063a71fc0c ffff000008da7000 ffff80063b23c090 ffff80063a44f000 [ 20.626503] fb20: 0000000000000000 ffff000008daeb00 ffff80063a71fc0c ffff000008da7000 [ 20.634333] fb40: ffff80063b23c090 0000000000000000 ffff800600000037 ffff0000087e63d8 [ 20.642163] fb60: ffff80063a71fbc0 ffff000008807510 ffff80063a692400 ffff80063a20d500 [ 20.649993] fb80: ffff80063a44f000 ffff80063b23c000 ffff80063a69249c 0000000000000000 [ 20.657823] fba0: 0000000000000000 ffff80063a087800 ffff80063b23c000 ffff80063a20d500 [ 20.665653] fbc0: ffff80063a71fc10 ffff0000087e67dc ffff80063a20d500 ffff80063a692400 [ 20.673483] fbe0: ffff80063b23c000 0000000000000000 ffff80063a44f000 ffff80063a69249c [ 20.681312] fc00: ffff80063a5f1a10 000000103a087800 ffff80063a71fc70 ffff0000087e6b24 [ 20.689142] fc20: ffff80063a5f1a80 ffff80063a71fde8 000000000000000f 00000000000005ea [ 20.696972] fc40: ffff80063a5f1a10 0000000000000000 000000000000000f ffff00000887fbd0 [ 20.704802] fc60: fffffff43a5f1a80 0000000000000000 ffff80063a71fc80 ffff000008880240 [ 20.712632] fc80: ffff80063a71fd90 ffff0000087c7a34 ffff80063afc7180 0000000000000000 [ 20.720462] fca0: 0000ffffcae6fe18 0000000000000014 0000000060000000 0000000000000015 [ 20.728292] fcc0: 0000000000000123 00000000000000ce ffff0000088d2000 ffff80063b1f1900 [ 20.736122] fce0: 0000000000008933 ffff000008e7cb80 ffff80063a71fd80 ffff0000087c50a4 [ 20.743951] fd00: 0000000000008933 ffff000008e7cb80 ffff000008e7cb80 000000100000000e [ 20.751781] fd20: ffff80063a71fe4c 0000ffff00000300 0000000000000123 0000000000000000 [ 20.759611] fd40: 0000000000000000 ffff80063b1f0000 000000000000000e 0000000000000300 [ 20.767441] fd60: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 20.775271] fd80: 0000000000000000 0000000000000000 ffff80063a71fda0 ffff0000087c8c20 [ 20.783100] fda0: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.790930] fdc0: ffffffffffffffff 0000ffffa0903078 0000000000000000 000000001ea87232 [ 20.798760] fde0: 000000000000000f ffff80063a71fe40 ffff800600000014 ffff000000000001 [ 20.806590] fe00: 0000000000000000 0000000000000000 ffff80063a71fde8 0000000000000000 [ 20.814420] fe20: 0000000000000000 0000000000000000 0000000000000000 0000000000000001 [ 20.822249] fe40: 0000000203000011 0000000000000000 0000000000000000 ffff80063a68aa00 [ 20.830079] fe60: ffff80063a68aa00 0000000000000003 0000000000008933 ffff0000081f1b9c [ 20.837909] fe80: 0000000000000000 ffff000008082f30 0000000000000000 0000800637260000 [ 20.845739] fea0: ffffffffffffffff 0000ffffa07ca81c 0000000060000000 0000000000000015 [ 20.853569] fec0: 0000000000000003 000000001ea87232 000000000000000f 0000000000000000 [ 20.861399] fee0: 0000ffffcae6fe18 0000000000000014 0000000000000300 0000000000000000 [ 20.869228] ff00: 00000000000000ce 0000000000000000 00000000ffffffff 0000000000000000 [ 20.877059] ff20: 0000000000000002 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 20.884888] ff40: 0000000000000000 0000ffffa09ba018 0000ffffcae6fb20 000000001ea87010 [ 20.892718] ff60: 0000ffffa09b9000 0000ffffcae6fe30 0000ffffcae6fe18 000000000000000f [ 20.900548] ff80: 0000000000000003 000000001ea87232 0000000000000000 0000000000000000 [ 20.908378] ffa0: 0000000000000000 0000ffffcae6fdc0 0000ffffa09a7824 0000ffffcae6fdc0 [ 20.916208] ffc0: 0000ffffa0903078 0000000060000000 0000000000000003 00000000000000ce [ 20.924038] ffe0: 0000000000000000 0000000000000000 ffffffffffffffff ffffffffffffffff [ 20.931867] Call trace: [ 20.934312] Exception stack(0xffff80063a71f7e0 to 0xffff80063a71f910) [ 20.940750] f7e0: 0000000000000000 0001000000000000 ffff80063a71f9b0 ffff00000839c4c0 [ 20.948580] f800: ffff80063a71f840 ffff00000888a6e4 ffff80063a24c418 ffff80063a24c448 [ 20.956410] f820: 0000000000000000 ffff00000811cd54 ffff80063a71f860 ffff80063a24c458 [ 20.964240] f840: ffff80063a71f870 ffff00000888b258 ffff80063a24c418 0000000000000001 [ 20.972070] f860: ffff80063a71f910 ffff80063a7b7028 ffff80063a71f890 ffff0000088825e4 [ 20.979899] f880: 0000000000000000 00000000bafff000 000000067abe2adc 0000000000000000 [ 20.987729] f8a0: 0000000000000001 0000000000000000 ffff000008ed50d0 0000000000000000 [ 20.995560] f8c0: 0000000000000000 0000000000000000 ffff80063abe2adc ffff000008096360 [ 21.003390] f8e0: 000000000063abe2 0000ffffcae87ff0 0000ffffa09cfa14 0000ffffa084f588 [ 21.011219] f900: ffff0000087c8b70 0000ffffa09ba018 [ 21.016097] [<ffff00000839c4c0>] swiotlb_tbl_map_single+0x178/0x2ec [ 21.022362] [<ffff00000839c680>] map_single+0x4c/0x98 [ 21.027411] [<ffff00000839cd10>] swiotlb_map_page+0xa4/0x138 [ 21.033072] [<ffff000008096380>] __swiotlb_map_page+0x20/0x7c [ 21.038821] [<ffff00000864f770>] ravb_start_xmit+0x174/0x668 [ 21.044484] [<ffff0000087e6498>] dev_hard_start_xmit+0x8c/0x120 [ 21.050407] [<ffff000008807510>] sch_direct_xmit+0x108/0x1a0 [ 21.056064] [<ffff0000087e67dc>] __dev_queue_xmit+0x194/0x4cc [ 21.061807] [<ffff0000087e6b24>] dev_queue_xmit+0x10/0x18 [ 21.067214] [<ffff000008880240>] packet_sendmsg+0xf40/0x1220 [ 21.072873] [<ffff0000087c7a34>] sock_sendmsg+0x18/0x2c [ 21.078097] [<ffff0000087c8c20>] SyS_sendto+0xb0/0xf0 [ 21.083150] [<ffff000008082f30>] el0_svc_naked+0x24/0x28 [ 21.088462] Code: d34bfef7 2a1803f3 1a9f86d6 35fff878 (d4210000) [ 21.094611] ---[ end trace 5bc544ad491f3814 ]--- [ 21.099234] Kernel panic - not syncing: Fatal exception in interrupt [ 21.105587] Kernel Offset: disabled [ 21.109073] Memory Limit: none [ 21.112126] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Fixes: 2f45d1902acf ("ravb: minimize TX data copying") Signed-off-by: Masaru Nagai <[email protected] Signed-off-by: Simon Horman <[email protected]> Acked-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16mlx4: do not call napi_schedule() without careEric Dumazet1-1/+4
Disable BH around the call to napi_schedule() to avoid following warning [ 52.095499] NOHZ: local_softirq_pending 08 [ 52.421291] NOHZ: local_softirq_pending 08 [ 52.608313] NOHZ: local_softirq_pending 08 Fixes: 8d59de8f7bb3 ("net/mlx4_en: Process all completions in RX rings after port goes up") Signed-off-by: Eric Dumazet <[email protected]> Cc: Erez Shitrit <[email protected]> Cc: Eugenia Emantayev <[email protected]> Cc: Tariq Toukan <[email protected]> Acked-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-16Merge branch 'for-upstream' of ↵David S. Miller2-18/+45
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2017-01-16 Here are a couple of important 802.15.4 driver fixes for the 4.10 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-01-16mmc: core: Restore parts of the polling policy when switch to HS/HS DDRUlf Hansson1-13/+12
Regressions for not being able to detect an eMMC HS DDR mode card has been reported for the sdhci-esdhc-imx driver, but potentially other sdhci variants may suffer from the similar problem. The commit e173f8911f09 ("mmc: core: Update CMD13 polling policy when switch to HS DDR mode"), is causing the problem. It seems that change moved one step to far, regarding changing the host's timing before polling for a busy card. To fix this, let's move back to the behaviour when the host's timing is updated after the polling, but before the switch status is fetched and validated. In cases when polling with CMD13, we keep validating the switch status at each attempt. However, to align with the other card busy detections mechanism, let's fetch and validate the switch status also after the host's timing is updated. Reported-by: Clemens Gruber <[email protected]> Reported-by: Gary Bisson <[email protected]> Fixes: e173f8911f09 ("mmc: core: Update CMD13 polling policy when switch..") Cc: Shawn Lin <[email protected]> Cc: Dong Aisheng <[email protected]> Cc: Haibo Chen <[email protected]> Signed-off-by: Ulf Hansson <[email protected]> Tested-by: Clemens Gruber <[email protected]> Tested-by: Jagan Teki <[email protected]> Reviewed-by: Shawn Lin <[email protected]> Tested-by: Haibo Chen <[email protected]> Reviewed-by: Dong Aisheng <[email protected]>
2017-01-15Merge tag 'mac80211-for-davem-2017-01-13' of ↵David S. Miller10-38/+83
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== We have a number of fixes, in part because I was late in actually sending them out - will try to do better in the future: * handle VHT opmode properly when hostapd is controlling full station state * two fixes for minimum channel width in mac80211 * don't leave SMPS set to junk in HT capabilities * fix headroom when forwarding mesh packets, recently broken by another fix that failed to take into account frame encryption * fix the TID in null-data packets indicating EOSP (end of service period) in U-APSD * prevent attempting to use (and then failing which results in crashes) TXQs on stations that aren't added to the driver yet ==================== Signed-off-by: David S. Miller <[email protected]>
2017-01-15openvswitch: maintain correct checksum state in conntrack actionsLance Richardson1-2/+4
When executing conntrack actions on skbuffs with checksum mode CHECKSUM_COMPLETE, the checksum must be updated to account for header pushes and pulls. Otherwise we get "hw csum failure" logs similar to this (ICMP packet received on geneve tunnel via ixgbe NIC): [ 405.740065] genev_sys_6081: hw csum failure [ 405.740106] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G I 4.10.0-rc3+ #1 [ 405.740108] Call Trace: [ 405.740110] <IRQ> [ 405.740113] dump_stack+0x63/0x87 [ 405.740116] netdev_rx_csum_fault+0x3a/0x40 [ 405.740118] __skb_checksum_complete+0xcf/0xe0 [ 405.740120] nf_ip_checksum+0xc8/0xf0 [ 405.740124] icmp_error+0x1de/0x351 [nf_conntrack_ipv4] [ 405.740132] nf_conntrack_in+0xe1/0x550 [nf_conntrack] [ 405.740137] ? find_bucket.isra.2+0x62/0x70 [openvswitch] [ 405.740143] __ovs_ct_lookup+0x95/0x980 [openvswitch] [ 405.740145] ? netif_rx_internal+0x44/0x110 [ 405.740149] ovs_ct_execute+0x147/0x4b0 [openvswitch] [ 405.740153] do_execute_actions+0x22e/0xa70 [openvswitch] [ 405.740157] ovs_execute_actions+0x40/0x120 [openvswitch] [ 405.740161] ovs_dp_process_packet+0x84/0x120 [openvswitch] [ 405.740166] ovs_vport_receive+0x73/0xd0 [openvswitch] [ 405.740168] ? udp_rcv+0x1a/0x20 [ 405.740170] ? ip_local_deliver_finish+0x93/0x1e0 [ 405.740172] ? ip_local_deliver+0x6f/0xe0 [ 405.740174] ? ip_rcv_finish+0x3a0/0x3a0 [ 405.740176] ? ip_rcv_finish+0xdb/0x3a0 [ 405.740177] ? ip_rcv+0x2a7/0x400 [ 405.740180] ? __netif_receive_skb_core+0x970/0xa00 [ 405.740185] netdev_frame_hook+0xd3/0x160 [openvswitch] [ 405.740187] __netif_receive_skb_core+0x1dc/0xa00 [ 405.740194] ? ixgbe_clean_rx_irq+0x46d/0xa20 [ixgbe] [ 405.740197] __netif_receive_skb+0x18/0x60 [ 405.740199] netif_receive_skb_internal+0x40/0xb0 [ 405.740201] napi_gro_receive+0xcd/0x120 [ 405.740204] gro_cell_poll+0x57/0x80 [geneve] [ 405.740206] net_rx_action+0x260/0x3c0 [ 405.740209] __do_softirq+0xc9/0x28c [ 405.740211] irq_exit+0xd9/0xf0 [ 405.740213] do_IRQ+0x51/0xd0 [ 405.740215] common_interrupt+0x93/0x93 Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Signed-off-by: Lance Richardson <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-01-15Linux 4.10-rc4Linus Torvalds1-1/+1
2017-01-15Merge branch 'for-linus' of ↵Linus Torvalds5-27/+60
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "This tree contains 4 fixes. The first is a fix for a race that can causes oopses under the right circumstances, and that someone just recently encountered. Past that are several small trivial correct fixes. A real issue that was blocking development of an out of tree driver, but does not appear to have caused any actual problems for in-tree code. A potential deadlock that was reported by lockdep. And a deadlock people have experienced and took the time to track down caused by a cleanup that removed the code to drop a reference count" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: sysctl: Drop reference added by grab_header in proc_sys_readdir pid: fix lockdep deadlock warning due to ucount_lock libfs: Modify mount_pseudo_xattr to be clear it is not a userspace mount mnt: Protect the mountpoint hashtable with mount_lock
2017-01-15Merge tag 'char-misc-4.10-rc4' of ↵Linus Torvalds10-16/+34
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 4.10-rc4 that resolve some reported issues. The MEI driver issue resolves a lot of problems that people have been having, as does the mem driver fix. The other minor fixes resolve other reported issues. All of these have been in linux-next for a while" * tag 'char-misc-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: vme: Fix wrong pointer utilization in ca91cx42_slave_get auxdisplay: fix new ht16k33 build errors ppdev: don't print a free'd string extcon: return error code on failure drivers: char: mem: Fix thinkos in kmem address checks mei: bus: enable OS version only for SPT and newer
2017-01-15Merge tag 'driver-core-4.10-rc4' of ↵Linus Torvalds4-34/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single patch being reverted to remove a feature that was added in 4.10-rc1 that isn't quite ready for release. It will be redone as a debugfs file instead of a sysfs file in the future" * tag 'driver-core-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "driver core: Add deferred_probe attribute to devices in sysfs"
2017-01-15Merge tag 'tty-4.10-rc4' of ↵Linus Torvalds5-17/+25
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some small tty/serial driver fixes for 4.10-rc4 to resolve a number of reported issues. Nothing major here at all, one revert of a problematic patch, and some other tiny bugfixes. Full details are in the shortlog below. All have been in linux-next with no reported issues" * tag 'tty-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: sysrq: attach sysrq handler correctly for 32-bit kernel Revert "tty: serial: 8250: add CON_CONSDEV to flags" Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break 8250_pci: Fix potential use-after-free in error path tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done tty/serial: atmel_serial: BUG: stop DMA from transmitting in stop_tx
2017-01-15Merge tag 'usb-4.10-rc4' of ↵Linus Torvalds6-66/+98
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a few small USB driver fixes for 4.10-rc4 to resolve some reported issues. The "largest" here is a number of bugs being fixed in the ch341 usb-serial driver, to hopefully resolve the mess of different devices floating around that use this driver that have been having problems with the 4.10-rc1 release. There's also a tiny musb fix that I missed in the last pull request, as well as the traditional xhci fix rounding out the batch. All have been in linux-next with no reported issues" * tag 'usb-4.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: fix deadlock at host remove by running watchdog correctly USB: serial: ch341: fix control-message error handling usb: musb: fix runtime PM in debugfs wusbcore: Fix one more crypto-on-the-stack bug USB: serial: kl5kusb105: fix line-state error handling USB: serial: ch341: fix baud rate and line-control handling USB: serial: ch341: fix line settings after reset-resume USB: serial: ch341: fix resume after reset USB: serial: ch341: fix open error handling USB: serial: ch341: fix modem-control and B0 handling USB: serial: ch341: fix open and resume after B0 USB: serial: ch341: fix initial modem-control state
2017-01-15Merge branch 'i2c/for-current' of ↵Linus Torvalds5-12/+42
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Bugfixes for I2C. Mostly core this time which is a bit unusual but nothing really scary in there" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: piix4: Avoid race conditions with IMC i2c: fix spelling mistake: "insufficent" -> "insufficient" i2c: print correct device invalid address i2c: do not enable fall back to Host Notify by default i2c: fix kernel memory disclosure in dev interface
2017-01-15Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds18-100/+129
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - unwinder fixes - AMD CPU topology enumeration fixes - microcode loader fixes - x86 embedded platform fixes - fix for a bootup crash that may trigger when clearcpuid= is used with invalid values" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mpx: Use compatible types in comparison to fix sparse error x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc() x86/entry: Fix the end of the stack for newly forked tasks x86/unwind: Include __schedule() in stack traces x86/unwind: Disable KASAN checks for non-current tasks x86/unwind: Silence warnings for non-current tasks x86/microcode/intel: Use correct buffer size for saving microcode data x86/microcode/intel: Fix allocation size of struct ucode_patch x86/microcode/intel: Add a helper which gives the microcode revision x86/microcode: Use native CPUID to tickle out microcode revision x86/CPU: Add native CPUID variants returning a single datum x86/boot: Add missing declaration of string functions x86/CPU/AMD: Fix Bulldozer topology x86/platform/intel-mid: Rename 'spidev' to 'mrfld_spidev' x86/cpu: Fix typo in the comment for Anniedale x86/cpu: Fix bootup crashes by sanitizing the argument of the 'clearcpuid=' command-line option
2017-01-15Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull NOHZ fix from Ingo Molnar: "This fixes an old NOHZ race where we incorrectly calculate the next timer interrupt in certain circumstances where hrtimers are pending, that can cause hard to reproduce stalled-values artifacts in /proc/stat" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: Fix collision between tick and other hrtimers
2017-01-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds20-92/+257
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc race fixes uncovered by fuzzing efforts, a Sparse fix, two PMU driver fixes, plus miscellanous tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Reject non sampling events with precise_ip perf/x86/intel: Account interrupts for PEBS errors perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' race perf/core: Fix sys_perf_event_open() vs. hotplug perf/x86/intel: Use ULL constant to prevent undefined shift behaviour perf/x86/intel/uncore: Fix hardcoded socket 0 assumption in the Haswell init code perf/x86: Set pmu->module in Intel PMU modules perf probe: Fix to probe on gcc generated symbols for offline kernel perf probe: Fix --funcs to show correct symbols for offline module perf symbols: Robustify reading of build-id from sysfs perf tools: Install tools/lib/traceevent plugins with install-bin tools lib traceevent: Fix prev/next_prio for deadline tasks perf record: Fix --switch-output documentation and comment perf record: Make __record_options static tools lib subcmd: Add OPT_STRING_OPTARG_SET option perf probe: Fix to get correct modname from elf header samples/bpf trace_output_user: Remove duplicate sys/ioctl.h include samples/bpf sock_example: Avoid getting ethhdr from two includes perf sched timehist: Show total scheduling time
2017-01-15Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds7-43/+165
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "A number of regression fixes: - Fix a boot hang on machines that have somewhat unusual memory map entries of phys_addr=0x0 num_pages=0, which broke due to a recent commit. This commit got cherry-picked from the v4.11 queue because the bug is affecting real machines. - Fix a boot hang also reported by KASAN, caused by incorrect init ordering introduced by a recent optimization. - Fix a recent robustification fix to allocate_new_fdt_and_exit_boot() that introduced an invalid assumption. Neither bugs were seen in the wild AFAIK" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Prune invalid memory map entries and fix boot regression x86/efi: Don't allocate memmap through memblock after mm_init() efi/libstub/arm*: Pass latest memory map to the kernel
2017-01-15swiotlb: ensure that page-sized mappings are page-alignedNikita Yushchenko1-3/+3
Some drivers do depend on page mappings to be page aligned. Swiotlb already enforces such alignment for mappings greater than page, extend that to page-sized mappings as well. Without this fix, nvme hits BUG() in nvme_setup_prps(), because that routine assumes page-aligned mappings. Signed-off-by: Nikita Yushchenko <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Sagi Grimberg <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2017-01-14Merge branch 'for-linus' of ↵Linus Torvalds6-30/+59
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro. The most notable fix here is probably the fix for a splice regression ("fix a fencepost error in pipe_advance()") noticed by Alan Wylie. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fix a fencepost error in pipe_advance() coredump: Ensure proper size of sparse core files aio: fix lock dep warning tmpfs: clear S_ISGID when setting posix ACLs
2017-01-14Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds16-83/+66
Pull block fixes from Jens Axboe: - the virtio_blk stack DMA corruption fix from Christoph, fixing and issue with VMAP stacks. - O_DIRECT blkbits calculation fix from Chandan. - discard regression fix from Christoph. - queue init error handling fixes for nbd and virtio_blk, from Omar and Jeff. - two small nvme fixes, from Christoph and Guilherme. - rename of blk_queue_zone_size and bdev_zone_size to _sectors instead, to more closely follow what we do in other places in the block layer. This interface is new for this series, so let's get the naming right before releasing a kernel with this feature. From Damien. * 'for-linus' of git://git.kernel.dk/linux-block: block: don't try to discard from __blkdev_issue_zeroout sd: remove __data_len hack for WRITE SAME nvme: use blk_rq_payload_bytes scsi: use blk_rq_payload_bytes block: add blk_rq_payload_bytes block: Rename blk_queue_zone_size and bdev_zone_size nvme: apply DELAY_BEFORE_CHK_RDY quirk at probe time too nvme-rdma: fix nvme_rdma_queue_is_ready virtio_blk: fix panic in initialization error path nbd: blk_mq_init_queue returns an error code on failure, not NULL virtio_blk: avoid DMA to stack for the sense buffer do_direct_IO: Use inode->i_blkbits to compute block count to be cleaned
2017-01-14fix a fencepost error in pipe_advance()Al Viro1-23/+31
The logics in pipe_advance() used to release all buffers past the new position failed in cases when the number of buffers to release was equal to pipe->buffers. If that happened, none of them had been released, leaving pipe full. Worse, it was trivial to trigger and we end up with pipe full of uninitialized pages. IOW, it's an infoleak. Cc: [email protected] # v4.9 Reported-by: "Alan J. Wylie" <[email protected]> Tested-by: "Alan J. Wylie" <[email protected]> Signed-off-by: Al Viro <[email protected]>
2017-01-14coredump: Ensure proper size of sparse core filesDave Kleikamp3-0/+20
If the last section of a core file ends with an unmapped or zero page, the size of the file does not correspond with the last dump_skip() call. gdb complains that the file is truncated and can be confusing to users. After all of the vma sections are written, make sure that the file size is no smaller than the current file position. This problem can be demonstrated with gdb's bigcore testcase on the sparc architecture. Signed-off-by: Dave Kleikamp <[email protected]> Cc: Alexander Viro <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Al Viro <[email protected]>
2017-01-14aio: fix lock dep warningShaohua Li1-2/+4
lockdep reports a warnning. file_start_write/file_end_write only acquire/release the lock for regular files. So checking the files in aio side too. [ 453.532141] ------------[ cut here ]------------ [ 453.533011] WARNING: CPU: 1 PID: 1298 at ../kernel/locking/lockdep.c:3514 lock_release+0x434/0x670 [ 453.533011] DEBUG_LOCKS_WARN_ON(depth <= 0) [ 453.533011] Modules linked in: [ 453.533011] CPU: 1 PID: 1298 Comm: fio Not tainted 4.9.0+ #964 [ 453.533011] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014 [ 453.533011] ffff8803a24b7a70 ffffffff8196cffb ffff8803a24b7ae8 0000000000000000 [ 453.533011] ffff8803a24b7ab8 ffffffff81091ee1 ffff8803a5dba700 00000dba00000008 [ 453.533011] ffffed0074496f59 ffff8803a5dbaf54 ffff8803ae0f8488 fffffffffffffdef [ 453.533011] Call Trace: [ 453.533011] [<ffffffff8196cffb>] dump_stack+0x67/0x9c [ 453.533011] [<ffffffff81091ee1>] __warn+0x111/0x130 [ 453.533011] [<ffffffff81091f97>] warn_slowpath_fmt+0x97/0xb0 [ 453.533011] [<ffffffff81091f00>] ? __warn+0x130/0x130 [ 453.533011] [<ffffffff8191b789>] ? blk_finish_plug+0x29/0x60 [ 453.533011] [<ffffffff811205d4>] lock_release+0x434/0x670 [ 453.533011] [<ffffffff8198af94>] ? import_single_range+0xd4/0x110 [ 453.533011] [<ffffffff81322195>] ? rw_verify_area+0x65/0x140 [ 453.533011] [<ffffffff813aa696>] ? aio_write+0x1f6/0x280 [ 453.533011] [<ffffffff813aa6c9>] aio_write+0x229/0x280 [ 453.533011] [<ffffffff813aa4a0>] ? aio_complete+0x640/0x640 [ 453.533011] [<ffffffff8111df20>] ? debug_check_no_locks_freed+0x1a0/0x1a0 [ 453.533011] [<ffffffff8114793a>] ? debug_lockdep_rcu_enabled.part.2+0x1a/0x30 [ 453.533011] [<ffffffff81147985>] ? debug_lockdep_rcu_enabled+0x35/0x40 [ 453.533011] [<ffffffff812a92be>] ? __might_fault+0x7e/0xf0 [ 453.533011] [<ffffffff813ac9bc>] do_io_submit+0x94c/0xb10 [ 453.533011] [<ffffffff813ac2ae>] ? do_io_submit+0x23e/0xb10 [ 453.533011] [<ffffffff813ac070>] ? SyS_io_destroy+0x270/0x270 [ 453.533011] [<ffffffff8111d7b3>] ? mark_held_locks+0x23/0xc0 [ 453.533011] [<ffffffff8100201a>] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 453.533011] [<ffffffff813acb90>] SyS_io_submit+0x10/0x20 [ 453.533011] [<ffffffff824f96aa>] entry_SYSCALL_64_fastpath+0x18/0xad [ 453.533011] [<ffffffff81119190>] ? trace_hardirqs_off_caller+0xc0/0x110 [ 453.533011] ---[ end trace b2fbe664d1cc0082 ]--- Cc: Dmitry Monakhov <[email protected]> Cc: Jan Kara <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Shaohua Li <[email protected]> Signed-off-by: Al Viro <[email protected]>
2017-01-14Merge tag 'dmaengine-fix-4.10-rc4' of ↵Linus Torvalds9-48/+87
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "The fixes this time around are spread over drivers, pretty normal update: - PCI ID for SKL ioatdma, workaround for SKX and ioat_alloc_chan_resources sleepy allocation fix - dw kconfig typo fix - null pointer deref for stm32 - MAINTAINERS Update for at_hdmac - pl330 runtime pm fixes - omap-dma port window fix - rcar-dmac unmap slave resource fix" * tag 'dmaengine-fix-4.10-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: rcar-dmac: unmap slave resource when channel is freed dmaengine: omap-dma: Fix the port_window support dmaengine: iota: ioat_alloc_chan_resources should not perform sleeping allocations. dmaengine: pl330: Fix runtime PM support for terminated transfers MAINTAINERS: dmaengine: Update + Hand over the at_hdmac driver to Ludovic dmaengine: omap-dma: Fix dynamic lch_map allocation dmaengine: ti-dma-crossbar: Add some 'of_node_put()' in error path. dmaengine: stm32-dma: Fix null pointer dereference in stm32_dma_tx_status dmaengine: stm32-dma: Set correct args number for DMA request from DT dmaengine: dw: fix typo in Kconfig dmaengine: ioatdma: workaround SKX ioatdma version dmaengine: ioatdma: Add Skylake PCI Dev ID
2017-01-14efi/x86: Prune invalid memory map entries and fix boot regressionPeter Jones2-0/+67
Some machines, such as the Lenovo ThinkPad W541 with firmware GNET80WW (2.28), include memory map entries with phys_addr=0x0 and num_pages=0. These machines fail to boot after the following commit, commit 8e80632fb23f ("efi/esrt: Use efi_mem_reserve() and avoid a kmalloc()") Fix this by removing such bogus entries from the memory map. Furthermore, currently the log output for this case (with efi=debug) looks like: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0xffffffffffffffff] (0MB) This is clearly wrong, and also not as informative as it could be. This patch changes it so that if we find obviously invalid memory map entries, we print an error and skip those entries. It also detects the display of the address range calculation overflow, so the new output is: [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[0x0000000000000000-0x0000000000000000] (invalid) It also detects memory map sizes that would overflow the physical address, for example phys_addr=0xfffffffffffff000 and num_pages=0x0200000000000001, and prints: [ 0.000000] efi: [Firmware Bug]: Invalid EFI memory map entries: [ 0.000000] efi: mem45: [Reserved | | | | | | | | | | | | ] range=[phys_addr=0xfffffffffffff000-0x20ffffffffffffffff] (invalid) It then removes these entries from the memory map. Signed-off-by: Peter Jones <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]> [ardb: refactor for clarity with no functional changes, avoid PAGE_SHIFT] Signed-off-by: Matt Fleming <[email protected]> [Matt: Include bugzilla info in commit log] Cc: <[email protected]> # v4.9+ Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=191121 Signed-off-by: Ingo Molnar <[email protected]>
2017-01-14Revert "driver core: Add deferred_probe attribute to devices in sysfs"Greg Kroah-Hartman4-34/+0
This reverts commit 6751667a29d6fd64afb9ce30567ad616b68ed789. Rob Herring objected to it, and a replacement for it will be added using debugfs in the future. Cc: Ben Hutchings <[email protected]> Reported-by: Rob Herring <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-01-14perf/x86: Reject non sampling events with precise_ipJiri Olsa1-0/+4
As Peter suggested [1] rejecting non sampling PEBS events, because they dont make any sense and could cause bugs in the NMI handler [2]. [1] http://lkml.kernel.org/r/20170103094059.GC3093@worktop [2] http://lkml.kernel.org/r/[email protected] Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: Vince Weaver <[email protected]> Link: http://lkml.kernel.org/r/20170103142454.GA26251@krava Signed-off-by: Ingo Molnar <[email protected]>
2017-01-14perf/x86/intel: Account interrupts for PEBS errorsJiri Olsa3-17/+37
It's possible to set up PEBS events to get only errors and not any data, like on SNB-X (model 45) and IVB-EP (model 62) via 2 perf commands running simultaneously: taskset -c 1 ./perf record -c 4 -e branches:pp -j any -C 10 This leads to a soft lock up, because the error path of the intel_pmu_drain_pebs_nhm() does not account event->hw.interrupt for error PEBS interrupts, so in case you're getting ONLY errors you don't have a way to stop the event when it's over the max_samples_per_tick limit: NMI watchdog: BUG: soft lockup - CPU#22 stuck for 22s! [perf_fuzzer:5816] ... RIP: 0010:[<ffffffff81159232>] [<ffffffff81159232>] smp_call_function_single+0xe2/0x140 ... Call Trace: ? trace_hardirqs_on_caller+0xf5/0x1b0 ? perf_cgroup_attach+0x70/0x70 perf_install_in_context+0x199/0x1b0 ? ctx_resched+0x90/0x90 SYSC_perf_event_open+0x641/0xf90 SyS_perf_event_open+0x9/0x10 do_syscall_64+0x6c/0x1f0 entry_SYSCALL64_slow_path+0x25/0x25 Add perf_event_account_interrupt() which does the interrupt and frequency checks and call it from intel_pmu_drain_pebs_nhm()'s error path. We keep the pending_kill and pending_wakeup logic only in the __perf_event_overflow() path, because they make sense only if there's any data to deliver. Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: Vince Weaver <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-01-14perf/core: Fix concurrent sys_perf_event_open() vs. 'move_group' racePeter Zijlstra1-4/+54
Di Shen reported a race between two concurrent sys_perf_event_open() calls where both try and move the same pre-existing software group into a hardware context. The problem is exactly that described in commit: f63a8daa5812 ("perf: Fix event->ctx locking") ... where, while we wait for a ctx->mutex acquisition, the event->ctx relation can have changed under us. That very same commit failed to recognise sys_perf_event_context() as an external access vector to the events and thereby didn't apply the established locking rules correctly. So while one sys_perf_event_open() call is stuck waiting on mutex_lock_double(), the other (which owns said locks) moves the group about. So by the time the former sys_perf_event_open() acquires the locks, the context we've acquired is stale (and possibly dead). Apply the established locking rules as per perf_event_ctx_lock_nested() to the mutex_lock_double() for the 'move_group' case. This obviously means we need to validate state after we acquire the locks. Reported-by: Di Shen (Keen Lab) Tested-by: John Dias <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kees Cook <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Min Chong <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Fixes: f63a8daa5812 ("perf: Fix event->ctx locking") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-01-14perf/core: Fix sys_perf_event_open() vs. hotplugPeter Zijlstra1-22/+48
There is problem with installing an event in a task that is 'stuck' on an offline CPU. Blocked tasks are not dis-assosciated from offlined CPUs, after all, a blocked task doesn't run and doesn't require a CPU etc.. Only on wakeup do we ammend the situation and place the task on a available CPU. If we hit such a task with perf_install_in_context() we'll loop until either that task wakes up or the CPU comes back online, if the task waking depends on the event being installed, we're stuck. While looking into this issue, I also spotted another problem, if we hit a task with perf_install_in_context() that is in the middle of being migrated, that is we observe the old CPU before sending the IPI, but run the IPI (on the old CPU) while the task is already running on the new CPU, things also go sideways. Rework things to rely on task_curr() -- outside of rq->lock -- which is rather tricky. Imagine the following scenario where we're trying to install the first event into our task 't': CPU0 CPU1 CPU2 (current == t) t->perf_event_ctxp[] = ctx; smp_mb(); cpu = task_cpu(t); switch(t, n); migrate(t, 2); switch(p, t); ctx = t->perf_event_ctxp[]; // must not be NULL smp_function_call(cpu, ..); generic_exec_single() func(); spin_lock(ctx->lock); if (task_curr(t)) // false add_event_to_ctx(); spin_unlock(ctx->lock); perf_event_context_sched_in(); spin_lock(ctx->lock); // sees event So its CPU0's store of t->perf_event_ctxp[] that must not go 'missing'. Because if CPU2's load of that variable were to observe NULL, it would not try to schedule the ctx and we'd have a task running without its counter, which would be 'bad'. As long as we observe !NULL, we'll acquire ctx->lock. If we acquire it first and not see the event yet, then CPU0 must observe task_curr() and retry. If the install happens first, then we must see the event on sched-in and all is well. I think we can translate the first part (until the 'must not be NULL') of the scenario to a litmus test like: C C-peterz { } P0(int *x, int *y) { int r1; WRITE_ONCE(*x, 1); smp_mb(); r1 = READ_ONCE(*y); } P1(int *y, int *z) { WRITE_ONCE(*y, 1); smp_store_release(z, 1); } P2(int *x, int *z) { int r1; int r2; r1 = smp_load_acquire(z); smp_mb(); r2 = READ_ONCE(*x); } exists (0:r1=0 /\ 2:r1=1 /\ 2:r2=0) Where: x is perf_event_ctxp[], y is our tasks's CPU, and z is our task being placed on the rq of CPU2. The P0 smp_mb() is the one added by this patch, ordering the store to perf_event_ctxp[] from find_get_context() and the load of task_cpu() in task_function_call(). The smp_store_release/smp_load_acquire model the RCpc locking of the rq->lock and the smp_mb() of P2 is the context switch switching from whatever CPU2 was running to our task 't'. This litmus test evaluates into: Test C-peterz Allowed States 7 0:r1=0; 2:r1=0; 2:r2=0; 0:r1=0; 2:r1=0; 2:r2=1; 0:r1=0; 2:r1=1; 2:r2=1; 0:r1=1; 2:r1=0; 2:r2=0; 0:r1=1; 2:r1=0; 2:r2=1; 0:r1=1; 2:r1=1; 2:r2=0; 0:r1=1; 2:r1=1; 2:r2=1; No Witnesses Positive: 0 Negative: 7 Condition exists (0:r1=0 /\ 2:r1=1 /\ 2:r2=0) Observation C-peterz Never 0 7 Hash=e427f41d9146b2a5445101d3e2fcaa34 And the strong and weak model agree. Reported-by: Mark Rutland <[email protected]> Tested-by: Mark Rutland <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: Will Deacon <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-01-14x86/mpx: Use compatible types in comparison to fix sparse errorTobias Klauser1-1/+1
info->si_addr is of type void __user *, so it should be compared against something from the same address space. This fixes the following sparse error: arch/x86/mm/mpx.c:296:27: error: incompatible types in comparison expression (different address spaces) Signed-off-by: Tobias Klauser <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-01-14x86/tsc: Add the Intel Denverton Processor to native_calibrate_tsc()Len Brown1-0/+1
The Intel Denverton microserver uses a 25 MHz TSC crystal, so we can derive its exact [*] TSC frequency using CPUID and some arithmetic, eg.: TSC: 1800 MHz (25000000 Hz * 216 / 3 / 1000000) [*] 'exact' is only as good as the crystal, which should be +/- 20ppm Signed-off-by: Len Brown <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/306899f94804aece6d8fa8b4223ede3b48dbb59c.1484287748.git.len.brown@intel.com Signed-off-by: Ingo Molnar <[email protected]>
2017-01-13Merge branch 'for-linus-4.10' of ↵Linus Torvalds6-82/+117
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "These are all over the place. The tracepoint part of the pull fixes a crash and adds a little more information to two tracepoints, while the rest are good old fashioned fixes" * 'for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: make tracepoint format strings more compact Btrfs: add truncated_len for ordered extent tracepoints Btrfs: add 'inode' for extent map tracepoint btrfs: fix crash when tracepoint arguments are freed by wq callbacks Btrfs: adjust outstanding_extents counter properly when dio write is split Btrfs: fix lockdep warning about log_mutex Btrfs: use down_read_nested to make lockdep silent btrfs: fix locking when we put back a delayed ref that's too new btrfs: fix error handling when run_delayed_extent_op fails btrfs: return the actual error value from from btrfs_uuid_tree_iterate
2017-01-13Merge tag 'ceph-for-4.10-rc4' of git://github.com/ceph/ceph-clientLinus Torvalds2-2/+7
Pull ceph fixes from Ilya Dryomov: "Two small fixups for the filesystem changes that went into this merge window" * tag 'ceph-for-4.10-rc4' of git://github.com/ceph/ceph-client: ceph: fix get_oldest_context() ceph: fix mds cluster availability check
Powered by cgit, Gruvboxed by Blaster4385.