aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-12-03io_uring: remove io_wq_current_is_workerJackie Liu1-6/+2
Since commit b18fdf71e01f ("io_uring: simplify io_req_link_next()"), the io_wq_current_is_worker function is no longer needed, clean it up. Signed-off-by: Jackie Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-03io_uring: remove parameter ctx of io_submit_state_startJackie Liu1-2/+2
Parameter ctx we have never used, clean it up. Signed-off-by: Jackie Liu <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-03io_uring: mark us with IORING_FEAT_SUBMIT_STABLEJens Axboe2-1/+3
If this flag is set, applications can be certain that any data for async offload has been consumed when the kernel has consumed the SQE. Signed-off-by: Jens Axboe <[email protected]>
2019-12-03io_uring: ensure async punted connect requests copy dataJens Axboe3-15/+57
Just like commit f67676d160c6 for read/write requests, this one ensures that the sockaddr data has been copied for IORING_OP_CONNECT if we need to punt the request to async context. Signed-off-by: Jens Axboe <[email protected]>
2019-12-03io_uring: ensure async punted sendmsg/recvmsg requests copy dataJens Axboe3-64/+156
Just like commit f67676d160c6 for read/write requests, this one ensures that the msghdr data is fully copied if we need to punt a recvmsg or sendmsg system call to async context. Signed-off-by: Jens Axboe <[email protected]>
2019-12-03drm/i915/ehl: Make icp_digital_port_connected() use phy instead of portMatt Roper1-7/+5
When looking at SDEISR to determine the connection status of combo outputs, we should use the phy index rather than the port index. Although they're usually the same thing, EHL's DDI-D (port D) is attached to PHY-A and SDEISR doesn't even have bits for a "D" output. It's also possible that future platforms may map DDIs (the internal display engine programming units) to PHYs (the output handling on the IO side) in ways where port!=phy, so let's look at the PHY index by default. v2: Rename to intel_combo_phy_connected. (Lucas) Fixes: 719d24002602 ("drm/i915/ehl: Enable DDI-D") Cc: José Roberto de Souza <[email protected]> Cc: Lucas De Marchi <[email protected]> Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Reviewed-by: José Roberto de Souza <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 3d1e388d4072dd240e558709d2f73605a742a723) Signed-off-by: Joonas Lahtinen <[email protected]>
2019-12-03firmware: dmi: Add dmi_memdev_handleJean Delvare2-0/+18
Add a utility function dmi_memdev_handle() which returns the DMI handle associated with a given memory slot. This will allow kernel drivers to iterate over the memory slots. Signed-off-by: Jean Delvare <[email protected]>
2019-12-03firmware: dmi: Remember the memory typeJean Delvare2-1/+26
Store the memory type while walking the memory slots, and provide a way to retrieve it later. Signed-off-by: Jean Delvare <[email protected]>
2019-12-03can: xilinx_can: Fix usage of skb memorySrinivas Neeli1-12/+13
As per linux can framework, driver not allowed to touch the skb memory after can_put_echo_skb() call. This patch fixes the same. https://www.spinics.net/lists/linux-can/msg02199.html Signed-off-by: Srinivas Neeli <[email protected]> Reviewed-by: Appana Durga Kedareswara Rao <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-12-03can: xilinx_can: skip error message on deferred probeVenkatesh Yadav Abbarapu1-1/+2
When the CAN bus clock is provided from the clock wizard, clock wizard driver may not be available when can driver probes resulting to the error message "bus clock not found error". As this error message is not very useful to the end user, skip printing in the case of deferred probe. Signed-off-by: Venkatesh Yadav Abbarapu <[email protected]> Signed-off-by: Srinivas Neeli <[email protected]> Signed-off-by: Michal Simek <[email protected]> Reviewed-by: Appana Durga Kedareswara Rao <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-12-03can: ucan: fix non-atomic allocation in completion handlerJohan Hovold1-1/+1
USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable <[email protected]> # 4.19 Cc: Jakob Unterwurzacher <[email protected]> Cc: Martin Elshuber <[email protected]> Cc: Philipp Tomsich <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-12-03can: slcan: Fix use-after-free Read in slcan_openJouni Hogander1-0/+1
Slcan_open doesn't clean-up device which registration failed from the slcan_devs device list. On next open this list is iterated and freed device is accessed. Fix this by calling slc_free_netdev in error path. Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was identified in slip_open by syzboz. Same bug is in slcan.c. Here is the trace from the Syzbot slip report: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path") Cc: Wolfgang Grandegger <[email protected]> Cc: Marc Kleine-Budde <[email protected]> Cc: David Miller <[email protected]> Cc: Oliver Hartkopp <[email protected]> Cc: Lukas Bulwahn <[email protected]> Signed-off-by: Jouni Hogander <[email protected]> Cc: linux-stable <[email protected]> # >= v5.4 Acked-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-12-03MAINTAINERS: add myself as maintainer of MCAN MMIO device driverSriram Dash1-0/+9
Since we are actively working on MMIO MCAN device driver, as discussed with Marc, I am adding myself as a maintainer. Signed-off-by: Sriram Dash <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-12-03MAINTAINERS: add fragment for xilinx CAN driverAppana Durga Kedareswara rao1-0/+8
Added entry for xilinx CAN driver. Signed-off-by: Appana Durga Kedareswara rao <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-12-03ALSA: hda: Modify stream stripe mask only when neededTakashi Iwai3-7/+18
The recent commit in HD-audio stream management for changing the stripe control seems causing a regression on some platforms. The stripe control is currently used only by HDMI codec, and applying the stripe mask unconditionally may lead to scratchy and static noises as seen on some MacBooks. For addressing the regression, this patch changes the stream management code to apply the stripe mask conditionally only when the codec driver requested. Fixes: 9b6f7e7a296e ("ALSA: hda: program stripe bits for controller") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477 Tested-by: Michael Pobega <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2019-12-02io_uring: ensure async punted read/write requests copy iovecJens Axboe1-62/+181
Currently we don't copy the iovecs when we punt to async context. This can be problematic for applications that store the iovec on the stack, as they often assume that it's safe to let the iovec go out of scope as soon as IO submission has been called. This isn't always safe, as we will re-copy the iovec once we're in async context. Make this 100% safe by copying the iovec just once. With this change, applications may safely store the iovec on the stack for all cases. Reported-by: 李通洲 <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-02xfs: don't check for AG deadlock for realtime files in bunmapiOmar Sandoval1-1/+1
Commit 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") added a check in __xfs_bunmapi() to stop early if we would touch multiple AGs in the wrong order. However, this check isn't applicable for realtime files. In most cases, it just makes us do unnecessary commits. However, without the fix from the previous commit ("xfs: fix realtime file data space leak"), if the last and second-to-last extents also happen to have different "AG numbers", then the break actually causes __xfs_bunmapi() to return without making any progress, which sends xfs_itruncate_extents_flags() into an infinite loop. Fixes: 5b094d6dac04 ("xfs: fix multi-AG deadlock in xfs_bunmapi") Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2019-12-02xfs: fix realtime file data space leakOmar Sandoval1-11/+14
Realtime files in XFS allocate extents in rextsize units. However, the written/unwritten state of those extents is still tracked in blocksize units. Therefore, a realtime file can be split up into written and unwritten extents that are not necessarily aligned to the realtime extent size. __xfs_bunmapi() has some logic to handle these various corner cases. Consider how it handles the following case: 1. The last extent is unwritten. 2. The last extent is smaller than the realtime extent size. 3. startblock of the last extent is not aligned to the realtime extent size, but startblock + blockcount is. In this case, __xfs_bunmapi() calls xfs_bmap_add_extent_unwritten_real() to set the second-to-last extent to unwritten. This should merge the last and second-to-last extents, so __xfs_bunmapi() moves on to the second-to-last extent. However, if the size of the last and second-to-last extents combined is greater than MAXEXTLEN, xfs_bmap_add_extent_unwritten_real() does not merge the two extents. When that happens, __xfs_bunmapi() skips past the last extent without unmapping it, thus leaking the space. Fix it by only unwriting the minimum amount needed to align the last extent to the realtime extent size, which is guaranteed to merge with the last extent. Signed-off-by: Omar Sandoval <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2019-12-02io_uring: add general async offload contextJens Axboe1-24/+32
Right now we just copy the sqe for async offload, but we want to store more context across an async punt. In preparation for doing so, put the sqe copy inside a structure that we can expand. With this pointer added, we can get rid of REQ_F_FREE_SQE, as that is now indicated by whether req->io is NULL or not. No functional changes in this patch. Signed-off-by: Jens Axboe <[email protected]>
2019-12-02block: don't send uevent for empty disk when not invalidatingEric Biggers1-1/+1
Commit 6917d0689993 ("block: merge invalidate_partitions into rescan_partitions") caused a regression where systemd-udevd spins forever using max CPU starting at boot time. It's caused by a behavior change where a KOBJ_CHANGE uevent is now sent in a case where previously it wasn't. Restore the old behavior. Fixes: 6917d0689993 ("block: merge invalidate_partitions into rescan_partitions") Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-02io_uring: transform send/recvmsg() -ERESTARTSYS to -EINTRJens Axboe1-0/+2
We should never return -ERESTARTSYS to userspace, transform it into -EINTR. Cc: [email protected] # v5.3+ Signed-off-by: Jens Axboe <[email protected]>
2019-12-02Merge tag 'kbuild-v5.5' of ↵Linus Torvalds43-1742/+452
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - remove unneeded asm headers from hexagon, ia64 - add 'dir-pkg' target, which works like 'tar-pkg' but skips archiving - add 'helpnewconfig' target, which shows help for new CONFIG options - support 'make nsdeps' for external modules - make rebuilds faster by deleting $(wildcard $^) checks - remove compile tests for kernel-space headers - refactor modpost to simplify modversion handling - make single target builds faster - optimize and clean up scripts/kallsyms.c - refactor various Makefiles and scripts * tag 'kbuild-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (59 commits) MAINTAINERS: update Kbuild/Kconfig maintainer's email address scripts/kallsyms: remove redundant initializers scripts/kallsyms: put check_symbol_range() calls close together scripts/kallsyms: make check_symbol_range() void function scripts/kallsyms: move ignored symbol types to is_ignored_symbol() scripts/kallsyms: move more patterns to the ignored_prefixes array scripts/kallsyms: skip ignored symbols very early scripts/kallsyms: add const qualifiers where possible scripts/kallsyms: make find_token() return (unsigned char *) scripts/kallsyms: replace prefix_underscores_count() with strspn() scripts/kallsyms: add sym_name() to mitigate cast ugliness scripts/kallsyms: remove unneeded length check for prefix matching scripts/kallsyms: remove redundant is_arm_mapping_symbol() scripts/kallsyms: set relative_base more effectively scripts/kallsyms: shrink table before sorting it scripts/kallsyms: fix definitely-lost memory leak scripts/kallsyms: remove unneeded #ifndef ARRAY_SIZE kbuild: make single target builds even faster modpost: respect the previous export when 'exported twice' is warned modpost: do not set ->preloaded for symbols from Module.symvers ...
2019-12-02Merge tag 'linux-kselftest-5.5-rc1-fixes2' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull more kselftest fixes from Shuah Khan: "This second Kselftest fixes update for Linux 5.5-rc1 consists of an urgent revert to fix regression in CI coverage" * tag 'linux-kselftest-5.5-rc1-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: Revert "selftests: Fix O= and KBUILD_OUTPUT handling for relative paths"
2019-12-02Merge branch 'linus' of ↵Linus Torvalds13-34/+56
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix build error in crypto lib code when crypto API is off - Fix NULL/error check in hisilicon - Fix Kconfig-related build error in talitos * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: hisilicon - fix a NULL vs IS_ERR() bug in sec_create_qp_ctx() crypto: talitos - Fix build error by selecting LIB_DES crypto: arch - conditionalize crypto api in arch glue for lib code
2019-12-02Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-13/+13
Pull OpenRISC update from Stafford Horne: "White space fixups in Kconfig files from Krzysztof Kozlowski" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Fix Kconfig indentation
2019-12-02Merge tag 'for-linus-5.5-rc1' of ↵Linus Torvalds8-58/+247
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML updates from Richard Weinberger: - Fixes for our new virtio code - Fix for the irqflags tracer - Kconfig coding style fixes - Allow BPF firmware loading in our vector driver * tag 'for-linus-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Loadable BPF "Firmware" for vector drivers um: Fix Kconfig indentation um: virtio_uml: Disallow modular build um: virtio: Keep reading on -EAGAIN um: virtio: Remove device on disconnect um: Don't trace irqflags during shutdown
2019-12-02Merge tag 'upstream-5.5-rc1' of ↵Linus Torvalds13-77/+85
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI/UBIFS/JFFS2 updates from Richard Weinberger: "This pull request contains mostly fixes for UBI, UBIFS and JFFS2: UBI: - Fix a regression around producing a anchor PEB for fastmap. Due to a change in our locking fastmap was unable to produce fresh anchors an re-used the existing one a way to often. UBIFS: - Fixes for endianness. A few places blindly assumed little endian. - Fix for a memory leak in the orphan code. - Fix for a possible crash during a commit. - Revert a wrong bugfix. JFFS2: - Revert a bad bugfix (false positive from a code checking tool)" * tag 'upstream-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: Revert "jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()" ubi: Fix producing anchor PEBs ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gaps ubifs: do_kill_orphans: Fix a memory leak bug Revert "ubifs: Fix memory leak bug in alloc_ubifs_info() error path" ubifs: Fix type of sup->hash_algo ubifs: Fixed missed le64_to_cpu() in journal ubifs: Force prandom result to __le32 ubifs: Remove obsolete TODO from dfs_file_write() ubi: Fix warning static is not at beginning of declaration ubi: Print skip_check in ubi_dump_vol_info()
2019-12-02smb3: remove unused flag passed into close functionsSteve French2-16/+5
close was relayered to allow passing in an async flag which is no longer needed in this path. Remove the unneeded parameter "flags" passed in on close. Signed-off-by: Steve French <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2019-12-02cifs: remove redundant assignment to pointer pneg_ctxtColin Ian King1-1/+1
The pointer pneg_ctxt is being initialized with a value that is never read and it is being updated later with a new value. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-12-02Merge tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds126-6266/+5823
Pull XFS updates from Darrick Wong: "For this release, we changed quite a few things. Highlights: - Fixed some long tail latency problems in the block allocator - Removed some long deprecated (and for the past several years no-op) mount options and ioctls - Strengthened the extended attribute and directory verifiers - Audited and fixed all the places where we could return EFSCORRUPTED without logging anything - Refactored the old SGI space allocation ioctls to make the equivalent fallocate calls - Fixed a race between fallocate and directio - Fixed an integer overflow when files have more than a few billion(!) extents - Fixed a longstanding bug where quota accounting could be incorrect when performing unwritten extent conversion on a freshly mounted fs - Fixed various complaints in scrub about soft lockups and unresponsiveness to signals - De-vtable'd the directory handling code, which should make it faster - Converted to the new mount api, for better or for worse - Cleaned up some memory leaks and quite a lot of other smaller fixes and cleanups. A more detailed summary: - Fill out the build string - Prevent inode fork extent count overflows - Refactor the allocator to reduce long tail latency - Rework incore log locking a little to reduce spinning - Break up the xfs_iomap_begin functions into smaller more cohesive parts - Fix allocation alignment being dropped too early when the allocation request is for more blocks than an AG is large - Other small cleanups - Clean up file buftarg retrieval helpers - Hoist the resvsp and unresvsp ioctls to the vfs - Remove the undocumented biosize mount option, since it has never been mentioned as existing or supported on linux - Clean up some of the mount option printing and parsing - Enhance attr leaf verifier to check block structure - Check dirent and attr names for invalid characters before passing them to the vfs - Refactor open-coded bmbt walking - Fix a few places where we return EIO instead of EFSCORRUPTED after failing metadata sanity checks - Fix a synchronization problem between fallocate and aio dio corrupting the file length - Clean up various loose ends in the iomap and bmap code - Convert to the new mount api - Make sure we always log something when returning EFSCORRUPTED - Fix some problems where long running scrub loops could trigger soft lockup warnings and/or fail to exit due to fatal signals pending - Fix various Coverity complaints - Remove most of the function pointers from the directory code to reduce indirection penalties - Ensure that dquots are attached to the inode when performing unwritten extent conversion after io - Deuglify incore projid and crtime types - Fix another AGI/AGF locking order deadlock when renaming - Clean up some quota typedefs - Remove the FSSETDM ioctls which haven't done anything in 20 years - Fix some memory leaks when mounting the log fails - Fix an underflow when updating an xattr leaf freemap - Remove some trivial wrappers - Report metadata corruption as an error, not a (potentially) fatal assertion - Clean up the dir/attr buffer mapping code - Allow fatal signals to kill scrub during parent pointer checks" * tag 'xfs-5.5-merge-16' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (198 commits) xfs: allow parent directory scans to be interrupted with fatal signals xfs: remove the mappedbno argument to xfs_da_get_buf xfs: remove the mappedbno argument to xfs_da_read_buf xfs: split xfs_da3_node_read xfs: remove the mappedbno argument to xfs_dir3_leafn_read xfs: remove the mappedbno argument to xfs_dir3_leaf_read xfs: remove the mappedbno argument to xfs_attr3_leaf_read xfs: remove the mappedbno argument to xfs_da_reada_buf xfs: improve the xfs_dabuf_map calling conventions xfs: refactor xfs_dabuf_map xfs: simplify mappedbno handling in xfs_da_{get,read}_buf xfs: report corruption only as a regular error xfs: Remove kmem_zone_free() wrapper xfs: Remove kmem_zone_destroy() wrapper xfs: Remove slab init wrappers xfs: fix attr leaf header freemap.size underflow xfs: fix some memory leaks in log recovery xfs: fix another missing include xfs: remove XFS_IOC_FSSETDM and XFS_IOC_FSSETDM_BY_HANDLE xfs: remove duplicated include from xfs_dir2_data.c ...
2019-12-02ia64: remove stale paravirt leftoversJuergen Gross4-77/+34
Remove the last leftovers from IA64 Xen pv-guest support. PARAVIRT is long gone from IA64 Kconfig and Xen IA64 support, too. Due to lack of infrastructure no testing done. Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Tony Luck <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-02Merge tag 'firewire-update' of ↵Linus Torvalds4-11/+3
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull FireWire updates from Stefan Richter: - another y2038 fix - janitorial code movement * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: core: code cleanup after vm_map_pages_zero introduction firewire: ohci: stop using get_seconds() for BUS_TIME
2019-12-02Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds163-1987/+5656
Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: aacraid, ufs, zfcp, NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx plus a whole load of minor updates and fixes. The major core changes are Al Viro's reworking of sg's handling of copy to/from user, Ming Lei's removal of the host busy counter to avoid contention in the multiqueue case and Damien Le Moal's fixing of residual tracking across error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits) scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort() scsi: target: core: Fix a pr_debug() argument scsi: iscsi: Don't send data to unbound connection scsi: target: iscsi: Wait for all commands to finish before freeing a session scsi: target: core: Release SPC-2 reservations when closing a session scsi: target: core: Document target_cmd_size_check() scsi: bnx2i: fix potential use after free Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails" scsi: NCR5380: Add disconnect_mask module parameter scsi: NCR5380: Unconditionally clear ICR after do_abort() scsi: NCR5380: Call scsi_set_resid() on command completion scsi: scsi_debug: num_tgts must be >= 0 scsi: lpfc: use hdwq assigned cpu for allocation scsi: arcmsr: fix indentation issues scsi: qla4xxx: fix double free bug scsi: pm80xx: Modified the logic to collect fatal dump scsi: pm80xx: Tie the interrupt name to the module instance scsi: pm80xx: Controller fatal error through sysfs scsi: pm80xx: Do not request 12G sas speeds scsi: pm80xx: Cleanup command when a reset times out ...
2019-12-02vfio/pci: call irq_bypass_unregister_producer() before freeing irqJiang Yi1-1/+1
Since irq_bypass_register_producer() is called after request_irq(), we should do tear-down in reverse order: irq_bypass_unregister_producer() then free_irq(). Specifically free_irq() may release resources required by the irqbypass del_producer() callback. Notably an example provided by Marc Zyngier on arm64 with GICv4 that he indicates has the potential to wedge the hardware: free_irq(irq) __free_irq(irq) irq_domain_deactivate_irq(irq) its_irq_domain_deactivate() [unmap the VLPI from the ITS] kvm_arch_irq_bypass_del_producer(cons, prod) kvm_vgic_v4_unset_forwarding(kvm, irq, ...) its_unmap_vlpi(irq) [Unmap the VLPI from the ITS (again), remap the original LPI] Signed-off-by: Jiang Yi <[email protected]> Cc: [email protected] # v4.4+ Fixes: 6d7425f109d26 ("vfio: Register/unregister irq_bypass_producer") Link: https://lore.kernel.org/kvm/[email protected] Reviewed-by: Marc Zyngier <[email protected]> Reviewed-by: Eric Auger <[email protected]> [aw: commit log] Signed-off-by: Alex Williamson <[email protected]>
2019-12-02fs: cifs: Fix atime update check vs mtimeDeepa Dinamani1-1/+1
According to the comment in the code and commit log, some apps expect atime >= mtime; but the introduced code results in atime==mtime. Fix the comparison to guard against atime<mtime. Fixes: 9b9c5bea0b96 ("cifs: do not return atime less than mtime") Signed-off-by: Deepa Dinamani <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Steve French <[email protected]>
2019-12-02CIFS: Fix NULL-pointer dereference in smb2_push_mandatory_locksPavel Shilovsky1-3/+4
Currently when the client creates a cifsFileInfo structure for a newly opened file, it allocates a list of byte-range locks with a pointer to the new cfile and attaches this list to the inode's lock list. The latter happens before initializing all other fields, e.g. cfile->tlink. Thus a partially initialized cifsFileInfo structure becomes available to other threads that walk through the inode's lock list. One example of such a thread may be an oplock break worker thread that tries to push all cached byte-range locks. This causes NULL-pointer dereference in smb2_push_mandatory_locks() when accessing cfile->tlink: [598428.945633] BUG: kernel NULL pointer dereference, address: 0000000000000038 ... [598428.945749] Workqueue: cifsoplockd cifs_oplock_break [cifs] [598428.945793] RIP: 0010:smb2_push_mandatory_locks+0xd6/0x5a0 [cifs] ... [598428.945834] Call Trace: [598428.945870] ? cifs_revalidate_mapping+0x45/0x90 [cifs] [598428.945901] cifs_oplock_break+0x13d/0x450 [cifs] [598428.945909] process_one_work+0x1db/0x380 [598428.945914] worker_thread+0x4d/0x400 [598428.945921] kthread+0x104/0x140 [598428.945925] ? process_one_work+0x380/0x380 [598428.945931] ? kthread_park+0x80/0x80 [598428.945937] ret_from_fork+0x35/0x40 Fix this by reordering initialization steps of the cifsFileInfo structure: initialize all the fields first and then add the new byte-range lock list to the inode's lock list. Cc: Stable <[email protected]> Signed-off-by: Pavel Shilovsky <[email protected]> Reviewed-by: Aurelien Aptel <[email protected]> Signed-off-by: Steve French <[email protected]>
2019-12-02Fixed updating of ethertype in function skb_mpls_popMartin Varghese4-5/+11
The skb_mpls_pop was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_pop function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x8847), mpls(label=12/0xfffff,tc=0/0,ttl=0/0x0,bos=1/1), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), pop_mpls(eth_type=0x800),4 Fixes: ed246cee09b9 ("net: core: move pop MPLS functionality from OvS to core helper") Signed-off-by: Martin Varghese <[email protected]> Acked-by: Pravin B Shelar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-02sch_cake: Add missing NLA policy entry TCA_CAKE_SPLIT_GSOVictorien Molle1-0/+1
This field has never been checked since introduction in mainline kernel Signed-off-by: Victorien Molle <[email protected]> Signed-off-by: Florent Fourcot <[email protected]> Fixes: 2db6dc2662ba "sch_cake: Make gso-splitting configurable from userspace" Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-02Merge tag 'docs-5.5a' of git://git.lwn.net/linuxLinus Torvalds89-780/+2559
Pull Documentation updates from Jonathan Corbet: "Here are the main documentation changes for 5.5: - Various kerneldoc script enhancements. - More RST conversions; those are slowing down as we run out of things to convert, but we're a ways from done still. - Dan's "maintainer profile entry" work landed at last. Now we just need to get maintainers to fill in the profiles... - A reworking of the parallel build setup to work better with a variety of systems (and to not take over huge systems entirely in particular). - The MAINTAINERS file is now converted to RST during the build. Hopefully nobody ever tries to print this thing, or they will need to load a lot of paper. - A script and documentation making it easy for maintainers to add Link: tags at commit time. Also included is the removal of a bunch of spurious CR characters" * tag 'docs-5.5a' of git://git.lwn.net/linux: (91 commits) docs: remove a bunch of stray CRs docs: fix up the maintainer profile document libnvdimm, MAINTAINERS: Maintainer Entry Profile Maintainer Handbook: Maintainer Entry Profile MAINTAINERS: Reclaim the P: tag for Maintainer Entry Profile docs, parallelism: Rearrange how jobserver reservations are made docs, parallelism: Do not leak blocking mode to other readers docs, parallelism: Fix failure path and add comment Documentation: Remove bootmem_debug from kernel-parameters.txt Documentation: security: core.rst: fix warnings Documentation/process/howto/kokr: Update for 4.x -> 5.x versioning Documentation/translation: Use Korean for Korean translation title docs/memory-barriers.txt: Remove remaining references to mmiowb() docs/memory-barriers.txt/kokr: Update I/O section to be clearer about CPU vs thread docs/memory-barriers.txt/kokr: Fix style, spacing and grammar in I/O section Documentation/kokr: Kill all references to mmiowb() docs/memory-barriers.txt/kokr: Rewrite "KERNEL I/O BARRIER EFFECTS" section docs: Add initial documentation for devfreq Documentation: Document how to get links with git am docs: Add request_irq() documentation ...
2019-12-02Merge tag 'devicetree-for-5.5' of ↵Linus Torvalds254-3792/+6314
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull Devicetree updates from Rob Herring: - DT schemas for PWM, syscon, power domains, SRAM, syscon-reboot, syscon-poweroff, renesas-irqc, simple-pm-bus, renesas-bsc, pwm-rcar, Renesas tpu, at24 eeprom, rtc-sh, Allwinner PS/2, sharp,ld-d5116z01b panel, Arm SMMU, max77650, Meson CEC, Amlogic canvas and DWC3 glue, Allwinner A10 mUSB and CAN, TI Davinci MDIO, QCom QCS404 interconnect, Unisoc/Spreadtrum SoCs and UART - Convert a bunch of Samsung bindings to DT schema - Convert a bunch of ST stm32 bindings to DT schema - Realtek and Exynos additions to Arm Mali bindings - Fix schema errors in RiscV CPU schema - Various schema fixes from improved meta-schema checks - Improve the handling of 'dma-ranges' and in particular fix DMA mask setup on PCI bridges - Fix a memory leak in add_changeset_property() and DT unit tests. - Several documentation improvements for schema validation - Rework build rules to improve schema validation errors - Color output for dtx_diff * tag 'devicetree-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (138 commits) libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h dt-bindings: arm: Remove leftover axentia.txt of: unittest: fix memory leak in attach_node_and_children of: overlay: add_changeset_property() memory leak dt-bindings: interrupt-controller: arm,gic-v3: Add missing type to interrupt-partition-* nodes dt-bindings: firmware: ixp4xx: Drop redundant minItems/maxItems dt-bindings: power: Rename back power_domain.txt bindings to fix references dt-bindings: i2c: stm32: Migrate i2c-stm32 documentation to yaml dt-bindings: mtd: Convert stm32 fmc2-nand bindings to json-schema dt-bindings: remoteproc: convert stm32-rproc to json-schema dt-bindings: mailbox: convert stm32-ipcc to json-schema dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema dt-bindings: interrupt-controller: Convert stm32-exti to json-schema dt-bindings: crypto: Convert stm32 HASH bindings to json-schema dt-bindings: rng: Convert stm32 RNG bindings to json-schema dt-bindings: pwm: Convert Samsung PWM bindings to json-schema dt-bindings: pwm: Convert PWM bindings to json-schema dt-bindings: serial: Add a new compatible string for SC9863A dt-bindings: serial: Convert sprd-uart to json-schema dt-bindings: arm: Add bindings for Unisoc SC9863A ...
2019-12-02Merge tag 'pstore-v5.5-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore bug fix from Kees Cook: - add missing "static" (Ben Dooks) * tag 'pstore-v5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: Make pstore_choose_compression() static
2019-12-02Merge tag 'iommu-updates-v5.5' of ↵Linus Torvalds43-1213/+1651
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Conversion of the AMD IOMMU driver to use the dma-iommu code for imlementing the DMA-API. This gets rid of quite some code in the driver itself, but also has some potential for regressions (non are known at the moment). - Support for the Qualcomm SMMUv2 implementation in the SDM845 SoC. This also includes some firmware interface changes, but those are acked by the respective maintainers. - Preparatory work to support two distinct page-tables per domain in the ARM-SMMU driver - Power management improvements for the ARM SMMUv2 - Custom PASID allocator support - Multiple PCI DMA alias support for the AMD IOMMU driver - Adaption of the Mediatek driver to the changed IO/TLB flush interface of the IOMMU core code. - Preparatory patches for the Renesas IOMMU driver to support future hardware. * tag 'iommu-updates-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (62 commits) iommu/rockchip: Don't provoke WARN for harmless IRQs iommu/vt-d: Turn off translations at shutdown iommu/vt-d: Check VT-d RMRR region in BIOS is reported as reserved iommu/arm-smmu: Remove duplicate error message iommu/arm-smmu-v3: Don't display an error when IRQ lines are missing iommu/ipmmu-vmsa: Add utlb_offset_base iommu/ipmmu-vmsa: Add helper functions for "uTLB" registers iommu/ipmmu-vmsa: Calculate context registers' offset instead of a macro iommu/ipmmu-vmsa: Add helper functions for MMU "context" registers iommu/ipmmu-vmsa: tidyup register definitions iommu/ipmmu-vmsa: Remove all unused register definitions iommu/mediatek: Reduce the tlb flush timeout value iommu/mediatek: Get rid of the pgtlock iommu/mediatek: Move the tlb_sync into tlb_flush iommu/mediatek: Delete the leaf in the tlb_flush iommu/mediatek: Use gather to achieve the tlb range flush iommu/mediatek: Add a new tlb_lock for tlb_flush iommu/mediatek: Correct the flush_iotlb_all callback iommu/io-pgtable-arm: Rename IOMMU_QCOM_SYS_CACHE and improve doc iommu/io-pgtable-arm: Rationalise MAIR handling ...
2019-12-02Merge tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds43-269/+4198
Pull dmaengine updates from Vinod Koul: "Here are the changes this time around, couple of new drivers and updates to few more: - New drivers for SiFive PDMA, Socionext Milbeaut HDMAC and XDMAC, Freescale dpaa2 qDMA - Support for X1000 in JZ4780 - Xilinx dma updates and support for Xilinx AXI MCDM controller - New bindings for rcar R8A774B1 - Minor updates to dw, dma-jz4780, ti-edma, sprd drivers" * tag 'dmaengine-5.5-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (61 commits) dmaengine: Fix Kconfig indentation dmaengine: sf-pdma: move macro to header file dmaengine: sf-pdma: replace /** with /* for non-function comment dmaengine: ti: edma: fix missed failure handling dmaengine: mmp_pdma: add missed of_dma_controller_free dmaengine: mmp_tdma: add missed of_dma_controller_free dmaengine: sprd: Add wrap address support for link-list mode MAINTAINERS: Add Green as SiFive PDMA driver maintainer dmaengine: sf-pdma: add platform DMA support for HiFive Unleashed A00 dt-bindings: dmaengine: sf-pdma: add bindins for SiFive PDMA dmaengine: zx: remove: removed dmam_pool_destroy dmaengine: mediatek: hsdma_probe: fixed a memory leak when devm_request_irq fails dmaengine: iop-adma: clean up an indentation issue dmaengine: milbeaut-xdmac: remove redundant error log dmaengine: milbeaut-hdmac: remove redundant error log dmaengine: dma-jz4780: add missed clk_disable_unprepare in remove dmaengine: JZ4780: Add support for the X1000. dt-bindings: dmaengine: Add X1000 bindings. dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support dmaengine: xilinx_dma: Extend dma_config struct to store irq routine handle ...
2019-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller10-51/+60
Daniel Borkmann says: ==================== pull-request: bpf 2019-12-02 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 6 day(s) which contain a total of 10 files changed, 60 insertions(+), 51 deletions(-). The main changes are: 1) Fix vmlinux BTF generation for binutils pre v2.25, from Stanislav Fomichev. 2) Fix libbpf global variable relocation to take symbol's st_value offset into account, from Andrii Nakryiko. 3) Fix libbpf build on powerpc where check_abi target fails due to different readelf output format, from Aurelien Jarno. 4) Don't set BPF insns RO for the case when they are JITed in order to avoid fragmenting the direct map, from Daniel Borkmann. 5) Fix static checker warning in btf_distill_func_proto() as well as a build error due to empty enum when BPF is compiled out, from Alexei Starovoitov. 6) Fix up generation of bpf_helper_defs.h for perf, from Arnaldo Carvalho de Melo. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-12-02tracing: Introduce trace event injectionCong Wang5-0/+348
We have been trying to use rasdaemon to monitor hardware errors like correctable memory errors. rasdaemon uses trace events to monitor various hardware errors. In order to test it, we have to inject some hardware errors, unfortunately not all of them provide error injections. MCE does provide a way to inject MCE errors, but errors like PCI error and devlink error don't, it is not easy to add error injection to each of them. Instead, it is relatively easier to just allow users to inject trace events in a generic way so that all trace events can be injected. This patch introduces trace event injection, where a new 'inject' is added to each tracepoint directory. Users could write into this file with key=value pairs to specify the value of each fields of the trace event, all unspecified fields are set to zero values by default. For example, for the net/net_dev_queue tracepoint, we can inject: INJECT=/sys/kernel/debug/tracing/events/net/net_dev_queue/inject echo "" > $INJECT echo "name='test'" > $INJECT echo "name='test' len=1024" > $INJECT cat /sys/kernel/debug/tracing/trace ... <...>-614 [000] .... 36.571483: net_dev_queue: dev= skbaddr=00000000fbf338c2 len=0 <...>-614 [001] .... 136.588252: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=0 <...>-614 [001] .N.. 208.431878: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=1024 Triggers could be triggered as usual too: echo "stacktrace if len == 1025" > /sys/kernel/debug/tracing/events/net/net_dev_queue/trigger echo "len=1025" > $INJECT cat /sys/kernel/debug/tracing/trace ... bash-614 [000] .... 36.571483: net_dev_queue: dev= skbaddr=00000000fbf338c2 len=0 bash-614 [001] .... 136.588252: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=0 bash-614 [001] .N.. 208.431878: net_dev_queue: dev=test skbaddr=00000000fbf338c2 len=1024 bash-614 [001] .N.1 284.236349: <stack trace> => event_inject_write => vfs_write => ksys_write => do_syscall_64 => entry_SYSCALL_64_after_hwframe The only thing that can't be injected is string pointers as they require constant string pointers, this can't be done at run time. Link: http://lkml.kernel.org/r/[email protected] Cc: Ingo Molnar <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2019-12-02io_uring: use current task creds instead of allocating a new oneJens Axboe3-4/+4
syzbot reports: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 9217 Comm: io_uring-sq Not tainted 5.4.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline] RIP: 0010:__validate_creds include/linux/cred.h:187 [inline] RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550 Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c 24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf RSP: 0018:ffff88809c45fda0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000043736564 RCX: ffffffff814f3318 RDX: 0000000000000002 RSI: ffffffff814f3329 RDI: 0000000000000010 RBP: ffff88809c45fdb8 R08: ffff8880a3aac240 R09: ffffed1014755849 R10: ffffed1014755848 R11: ffff8880a3aac247 R12: 0000000000000000 R13: ffff888098ab1600 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd51c40664 CR3: 0000000092641000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: io_sq_thread+0x1c7/0xa20 fs/io_uring.c:3274 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Modules linked in: ---[ end trace f2e1a4307fbe2245 ]--- RIP: 0010:creds_are_invalid kernel/cred.c:792 [inline] RIP: 0010:__validate_creds include/linux/cred.h:187 [inline] RIP: 0010:override_creds+0x9f/0x170 kernel/cred.c:550 Code: ac 25 00 81 fb 64 65 73 43 0f 85 a3 37 00 00 e8 17 ab 25 00 49 8d 7c 24 10 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 96 00 00 00 41 8b 5c 24 10 bf RSP: 0018:ffff88809c45fda0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000043736564 RCX: ffffffff814f3318 RDX: 0000000000000002 RSI: ffffffff814f3329 RDI: 0000000000000010 RBP: ffff88809c45fdb8 R08: ffff8880a3aac240 R09: ffffed1014755849 R10: ffffed1014755848 R11: ffff8880a3aac247 R12: 0000000000000000 R13: ffff888098ab1600 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffd51c40664 CR3: 0000000092641000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 which is caused by slab fault injection triggering a failure in prepare_creds(). We don't actually need to create a copy of the creds as we're not modifying it, we just need a reference on the current task creds. This avoids the failure case as well, and propagates the const throughout the stack. Fixes: 181e448d8709 ("io_uring: async workers should inherit the user creds") Reported-by: [email protected] Signed-off-by: Jens Axboe <[email protected]>
2019-12-02platform/chrome: wilco_ec: fix use after free issueWen Yang1-1/+1
This is caused by dereferencing 'dev_data' after put_device() in the telem_device_remove() function. This patch just moves the put_device() down a bit to avoid this issue. Fixes: 1210d1e6bad1 ("platform/chrome: wilco_ec: Add telemetry char device interface") Signed-off-by: Wen Yang <[email protected]> Cc: Benson Leung <[email protected]> Cc: Enric Balletbo i Serra <[email protected]> Cc: Nick Crews <[email protected]> Cc: [email protected] Signed-off-by: Enric Balletbo i Serra <[email protected]>
2019-12-02Merge tag 'gvt-next-fixes-2019-12-02' of https://github.com/intel/gvt-linux ↵Joonas Lahtinen2-5/+6
into drm-intel-next-fixes gvt-next-fixes-2019-12-02 - Fix cmd parser for MI_ATOMIC (Zhenyu) - Fix non-priv register access warning on CFL (Fred) Signed-off-by: Joonas Lahtinen <[email protected]> From: Zhenyu Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-12-02libbpf: Fix readelf output parsing on powerpc with recent binutilsAurelien Jarno1-2/+2
On powerpc with recent versions of binutils, readelf outputs an extra field when dumping the symbols of an object file. For example: 35: 0000000000000838 96 FUNC LOCAL DEFAULT [<localentry>: 8] 1 btf_is_struct The extra "[<localentry>: 8]" prevents the GLOBAL_SYM_COUNT variable to be computed correctly and causes the check_abi target to fail. Fix that by looking for the symbol name in the last field instead of the 8th one. This way it should also cope with future extra fields. Signed-off-by: Aurelien Jarno <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Tested-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2019-12-02drm/i915/gem: Take timeline->mutex to walk list-of-requestsChris Wilson1-2/+2
Though the context is closed and so no more requests can be added to the timeline, retirement can still be removing requests. It can even be removing the very request we are inspecting and so cause us to wander into dead links. Serialise with the retirement by taking the timeline->mutex used for guarding the timeline->requests list. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112404 Fixes: 4a3174152147 ("drm/i915/gem: Refine occupancy test in kill_context()") Signed-off-by: Chris Wilson <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Matthew Auld <[email protected]> Cc: Joonas Lahtinen <[email protected]> Reviewed-by: Tvrtko Ursulin <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 7ce596a8036cf3a4cb9ffa0c4edd8a76a7a43cc3) Signed-off-by: Joonas Lahtinen <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.