aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-14dt-bindings: display: fix panel warningsSam Ravnborg8-9/+9
Fix following type af warnings in the panel bindings: Warning (unit_address_vs_reg): /example-0/dsi/panel: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /example-0/dsi@ff450000: node has a unit name, but no reg property Removing the "@xxx" from the node name fixed first warning. Adding a missing reg property fixed the second warning v2: - renamed mdss_dsi to dsi in panel-simple-dsi.yaml (Rob) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Rob Herring <robh@kernel.org> Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200308115017.18563-2-sam@ravnborg.org
2020-03-13drm/dp_mst: Convert drm_dp_mst_topology_mgr.is_waiting_for_dwn_reply to bitfieldLyude Paul1-5/+5
Small nitpick that I noticed a second ago - we can save some space in the struct by making this a bitfield and sticking it with the rest of the bitfields. Also, some small cleanup to the kdocs for this member. There should be no functional changes in this patch. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: Wayne Lin <Wayne.Lin@amd.com> Reviewed-by: Wayne Lin <Wayne.Lin@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200122194846.16025-1-lyude@redhat.com
2020-03-11drm: Remove drm dp mst destroy_connector callbacksPankaj Bharadiya3-33/+0
drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical amongst every driver and don't do anything other than cleaning up the connector((drm_connector_unregister()/drm_connector_put())) except for amdgpu_dm driver where some amdgpu_dm specific code in there. This connector cleaning up is now being handled in the drm core so driver destroy_connector callbacks are not needed (except for amdgpu_dm) hence remove them. Removal is done with below sementic patch: @r1@ identifier func, E; @@ struct drm_dp_mst_topology_cbs E = { ..., - .destroy_connector = func }; @delete depends on r1@ identifier r1.func; @@ - static void func(...){...} Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Suggested-by: Emil Velikov <emil.velikov@collabora.com> Suggested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-6-pankaj.laxminarayan.bharadiya@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2020-03-11drm: Add drm_dp_destroy_connector helper and use itPankaj Bharadiya1-2/+14
drm_dp_mst_topology_mgr_cbs.destroy_connector callbacks are identical amongst every driver and don't do anything other than cleaning up the connector (drm_connector_unregister()/drm_connector_put()) except for amdgpu_dm driver where some amdgpu_dm specific code in there which I an not sure if it should stay or not. Create and use a helper which calls driver's destroy_connector hook if available otherwise does cleanup internally. This is the step towards removing identical hooks from every driver. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Suggested-by: Emil Velikov <emil.velikov@collabora.com> Suggested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-5-pankaj.laxminarayan.bharadiya@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2020-03-11drm/dp_mst: Remove register_connector callbackPankaj Bharadiya1-1/+0
Now drm_dp_mst_topology_cbs.register_connector callback is not getting used anymore hence remove it. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Suggested-by: Emil Velikov <emil.velikov@collabora.com> Suggested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-4-pankaj.laxminarayan.bharadiya@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2020-03-11drm: Remove dp mst register connector callbacksPankaj Bharadiya4-25/+0
drm_dp_mst_port_add_connector() directly calls the drm_connector_register() now and drm_dp_mst_topology_mgr_cbs.register_connector callback is not getting called anymore. Hence remove all drm_dp_mst_topology_mgr_cbs.register_connector callbacks. This is the preparatory step for removing the drm_dp_mst_topology_mgr_cbs.register_connector callback hook. The removal is done with below sementic patch: @r1@ identifier func, E; @@ struct drm_dp_mst_topology_cbs E = { ..., - .register_connector = func }; @delete depends on r1@ identifier r1.func; @@ - static void func(...){...} Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Suggested-by: Emil Velikov <emil.velikov@collabora.com> Suggested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-3-pankaj.laxminarayan.bharadiya@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2020-03-11drm: Register connector instead of calling register_connector callbackPankaj Bharadiya1-1/+1
drm_dp_mst_topology_mgr_cbs.register_connector callbacks are literally identical amongst every driver and don't do anything other than calling drm_connector_register(). Hence call drm_connector_register() directly instead of a callback. This is the preparatory step for removing the drm_dp_mst_topology_mgr_cbs.register_connector callback hook. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Suggested-by: Emil Velikov <emil.velikov@collabora.com> Suggested-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200307083023.76498-2-pankaj.laxminarayan.bharadiya@intel.com Reviewed-by: Lyude Paul <lyude@redhat.com>
2020-03-11drm/edid: Add function to parse EDID descriptors for monitor rangeManasi Navare2-0/+66
Adaptive Sync is a VESA feature so add a DRM core helper to parse the EDID's detailed descritors to obtain the adaptive sync monitor range. Store this info as part fo drm_display_info so it can be used across all drivers. This part of the code is stripped out of amdgpu's function amdgpu_dm_update_freesync_caps() to make it generic and be used across all DRM drivers v6: * Call it monitor_range (Ville) v5: * Use the renamed flags v4: * Use is_display_descriptor() (Ville) * Name the monitor range flags (Ville) v3: * Remove the edid parsing restriction for just DP (Nicholas) * Use drm_for_each_detailed_block (Ville) * Make the drm_get_adaptive_sync_range function static (Harry, Jani) v2: * Change vmin and vmax to use u8 (Ville) * Dont store pixel clock since that is just a max dotclock and not related to VRR mode (Manasi) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-2-manasi.d.navare@intel.com
2020-03-11drm/edid: Name the detailed monitor range flagsManasi Navare1-0/+5
This patch adds defines for the detailed monitor range flags as per the EDID specification. v2: * Rename the flags with DRM_EDID_ (Jani N) Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Clinton A Taylor <clinton.a.taylor@intel.com> Cc: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200310231651.13841-1-manasi.d.navare@intel.com
2020-03-11drm/panel-simple: Fix dotclock for Logic PD Type 28Ville Syrjälä1-1/+1
The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. Someone tell me which (if either) of the dotclock or vreresh is correct? Cc: Adam Ford <aford173@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-22-ville.syrjala@linux.intel.com Reviewed-by: Adam Ford <aford173@gmail.com>
2020-03-11drm/panel-sony-acx424akp: Fix dotclocksVille Syrjälä1-2/+2
The currently listed dotclocks disagree with the currently listed vrefresh rates. Change the dotclocks to match the vrefresh. Someone tell me which (if either) of the dotclock or vreresh is correct? Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-9-ville.syrjala@linux.intel.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-11drm/panel-lg-lg4573: Fix dotclockVille Syrjälä1-1/+1
The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. Someone tell me which (if either) of the dotclock or vreresh is correct? Cc: Heiko Schocher <hs@denx.de> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-7-ville.syrjala@linux.intel.com Reviewed-by: Heiko Schocher <hs@denx.de>
2020-03-11drm/panel-ilitek-ili9322: Fix dotclocksVille Syrjälä1-7/+7
The listed dotclocks are two orders of mangnitude out. Fix them. v2: Just divide everything by 100 (Linus) Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200309133809.32585-1-ville.syrjala@linux.intel.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-11drm/panel-novatek-nt35510: Fix dotclockVille Syrjälä1-1/+1
The dotclock is three orders of magnitude out. Fix it. v2: Just set it to 20MHz (Linus) Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200309133644.32385-1-ville.syrjala@linux.intel.com Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-11drm: sysfs: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-1/+1
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200311073540.7108-1-tiwai@suse.de
2020-03-11drm/ttm: Use scnprintf() for avoiding potential buffer overflowTakashi Iwai1-1/+1
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Huang Rui <ray.huang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/357174/ Signed-off-by: Christian König <christian.koenig@amd.com>
2020-03-11drm/ttm: fix false positive assertChristian König1-3/+2
The assert sometimes incorrectly triggers when pinned BOs are destroyed. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Link: https://patchwork.freedesktop.org/patch/356737/
2020-03-11drm/rockchip: rgb: don't count non-existent devices when determining subdriversHeiko Stuebner1-1/+2
rockchip_drm_endpoint_is_subdriver() may also return error codes. For example if the target-node is in the disabled state, so no platform-device is getting created for it. In that case current code would count that as external rgb device, which in turn would make probing the rockchip-drm device fail. So only count the target as rgb device if the function actually returns 0. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200121224828.4070067-1-heiko@sntech.de
2020-03-10dt-bindings: display: Add idk-2121wr bindingFabrizio Castro1-0/+122
Add binding for the idk-2121wr LVDS panel from Advantech. Some panel-specific documentation can be found here: https://buy.advantech.eu/Displays/Embedded-LCD-Kits-High-Brightness/model-IDK-2121WR-K2FHA2E.htm Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1583869169-1006-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
2020-03-10drm/dp_mst: Fix drm_dp_check_mstb_guid() return codeLyude Paul1-2/+11
We actually expect this to return a 0 on success, or negative error code on failure. In order to do that, we check whether or not we managed to write the whole GUID and then return 0 if so, otherwise return a negative error code. Also, let's add an error message here so it's a little more obvious when this fails in the middle of a link address probe. This should fix issues with certain MST hubs seemingly stopping for no reason in the middle of the link address probe process. Fixes: cb897542c6d2 ("drm/dp_mst: Fix W=1 warnings") Cc: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: Sean Paul <sean@poorly.run> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234923.547873-3-lyude@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-10drm/dp_mst: Make drm_dp_mst_dpcd_write() consistent with drm_dp_dpcd_write()Lyude Paul1-7/+4
Noticed this while having some problems with hubs sometimes not being detected on the first plug. Every single dpcd read or write function returns the number of bytes transferred on success or a negative error code, except apparently for drm_dp_mst_dpcd_write() - which returns 0 on success. There's not really any good reason for this difference that I can tell, and having the two functions give differing behavior means that drm_dp_dpcd_write() will end up returning 0 on success for MST devices, but the number of bytes transferred for everything else. So, fix that and update the kernel doc. Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 2f221a5efed4 ("drm/dp_mst: Add MST support to DP DPCD R/W functions") Cc: Hans de Goede <hdegoede@redhat.com> Cc: Mikita Lipski <mikita.lipski@amd.com> Cc: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20200306234923.547873-2-lyude@redhat.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2020-03-10drm/panel-simple: Fix dotclock for Ortustech COM37H3MH. Nikolaus Schaller1-6/+6
The currently listed dotclock disagrees with the currently listed vrefresh rate. Change the dotclock to match the vrefresh. There are two variants of the COM37H3M panel. The older one's COM37H3M05DTC data sheet specifies: MIN TYP MAX CLK frequency fCLK -- 22.4 26.3 MHz (in VGA mode) VSYNC Frequency fVSYNC 54 60 66 Hz VSYNC cycle time tv -- 650 -- H HSYNC frequency fHSYNC -- 39.3 -- kHz HSYNC cycle time th -- 570 -- CLK The newer one's COM37H3M99DTC data sheet says: MIN TYP MAX CLK frequency fCLK 18 19.8 27 MHz VSYNC Frequency fVSYNC 54 60 66 Hz VSYNC cycle time tv 646 650 700 H HSYNC frequency fHSYNC -- 39.0 50.0 kHz HSYNC cycle time th 504 508 630 CLK So we choose a parameter set that lies within the specs of both variants. We start at .vrefresh = 60, choose .htotal = 570 and .vtotal = 650 and end up in a clock of 22.230 MHz. Reported-by: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/e63a0533ad5b5142373437ef758aedbdb716152d.1583826198.git.hns@goldelico.com
2020-03-10drm: panel: Set connector type for OrtusTech COM43H4M85ULC panelLaurent Pinchart1-0/+1
The OrtusTech COM43H4M85ULC is a DPI panel, set the connector type accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200309184210.10042-1-laurent.pinchart@ideasonboard.com
2020-03-10drm/mm: Remove redundant assignment in drm_mm_reserve_nodeAkeem G Abodunrin1-1/+1
In Pete Goodliffe words, "You can improve a system by adding new code. You can also improve a system by removing code" - In this case, commit "202b52b7fbf70" added new code to initialize end of the node. So, there is no need for duplicated initialization, and this patch simply removes it. Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200309151156.25040-1-akeem.g.abodunrin@intel.com
2020-03-10drm/meson: Add YUV420 output supportNeil Armstrong1-21/+70
This patch adds support for the YUV420 output from the Amlogic Meson SoCs Video Processing Unit to the HDMI Controller. The YUV420 is obtained by generating a YUV444 pixel stream like the classic HDMI display modes, but then the Video Encoder output can be configured to down-sample the YUV444 pixel stream to a YUV420 stream. In addition if pixel stream down-sampling, the Y Cb Cr components must also be mapped differently to align with the HDMI2.0 specifications. This mode needs a different clock generation scheme since the TMDS PHY clock must match the 10x ratio with the YUV420 pixel clock, but the video encoder must run at 2x the pixel clock. This patch enables the bridge bus format negociation, and handles the YUV420 case if selected by the negociation. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-12-narmstrong@baylibre.com
2020-03-10drm/meson: vclk: add support for YUV420 setupNeil Armstrong4-35/+95
This patch adds clocking support for the YUV420 output from the Amlogic Meson SoCs Video Processing Unit to the HDMI Controller. The YUV420 is obtained by generating a YUV444 pixel stream like the classic HDMI display modes, but then the Video Encoder output can be configured to down-sample the YUV444 pixel stream to a YUV420 stream. This mode needs a different clock generation scheme since the TMDS PHY clock must match the 10x ratio with the YUV420 pixel clock, but the video encoder must run at 2x the pixel clock. This patch adds the TMDS PHY clock value in all the video clock setup in order to better support these specific uses cases and switch to the Common Clock framework for clocks handling in the future. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-11-narmstrong@baylibre.com
2020-03-10drm/meson: venc: add support for YUV420 setupNeil Armstrong3-4/+9
This patch adds encoding support for the YUV420 output from the Amlogic Meson SoCs Video Processing Unit to the HDMI Controller. The YUV420 is obtained by generating a YUV444 pixel stream like the classic HDMI display modes, but then the Video Encoder output can be configured to down-sample the YUV444 pixel stream to a YUV420 stream. In addition if pixel stream down-sampling, the Y Cb Cr components must also be mapped differently to align with the HDMI2.0 specifications. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-10-narmstrong@baylibre.com
2020-03-10drm/meson: dw-hdmi: stop enforcing input_bus_formatNeil Armstrong1-1/+0
To allow using formats from negotiation, stop enforcing input_bus_format in the private dw-plat-data struct. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-9-narmstrong@baylibre.com
2020-03-10drm/meson: meson_dw_hdmi: add bridge and switch to drm_bridge_funcsNeil Armstrong1-20/+65
Switch the dw-hdmi driver to drm_bridge_funcs by implementing a new local bridge, connecting it to the dw-hdmi bridge, then implement the atomic_get_input_bus_fmts/atomic_get_output_bus_fmts. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-8-narmstrong@baylibre.com
2020-03-10drm/meson: venc: make drm_display_mode constNeil Armstrong2-2/+2
Before switching to bridge funcs, make sure drm_display_mode is passed as const to the venc functions. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-7-narmstrong@baylibre.com
2020-03-10drm/bridge: synopsys: dw-hdmi: allow ycbcr420 modes for >= 0x200aNeil Armstrong2-0/+7
Now the DW-HDMI Controller supports the HDMI2.0 modes, enable support for these modes in the connector if the platform supports them. We limit these modes to DW-HDMI IP version >= 0x200a which are designed to support HDMI2.0 display modes. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-6-narmstrong@baylibre.com
2020-03-10drm/bridge: synopsys: dw-hdmi: add bus format negociationNeil Armstrong1-4/+277
Add the atomic_get_output_bus_fmts, atomic_get_input_bus_fmts to negociate the possible output and input formats for the current mode and monitor, and use the negotiated formats in a basic atomic_check callback. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-5-narmstrong@baylibre.com
2020-03-10drm/bridge: dw-hdmi: Plug atomic state hooks to the default implementationNeil Armstrong1-0/+3
Add atomic_duplicate_state/atomic_destroy_state/atomic_reset bridge funcs to allow setup of atomic bridge state. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-4-narmstrong@baylibre.com
2020-03-10drm/bridge: dw-hdmi: add max bpc connector propertyJonas Karlman1-0/+8
Add the max_bpc property to the dw-hdmi connector to prepare support for 10, 12 & 16bit output support. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-3-narmstrong@baylibre.com
2020-03-10drm/bridge: dw-hdmi: set mtmdsclock for deep colorJonas Karlman1-1/+20
Configure the correct mtmdsclock for deep colors to prepare support for 10, 12 & 16bit output. Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jernej Škrabec <jernej.skrabec@siol.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200304104052.17196-2-narmstrong@baylibre.com
2020-03-09drm/virtio: add case for shmem objects in virtio_gpu_cleanup_object(..)Gurchetan Singh2-15/+20
This function can be reused for hostmem objects. v2: move virtio_gpu_is_shmem() check to virtio_gpu_cleanup_object() v3: use-after free fix Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200305013212.130640-2-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-03-09drm/virtio: factor out the sg_table from virtio_gpu_objectGurchetan Singh3-20/+30
A resource will be a shmem based resource or a (planned) vram based resource, so it makes sense to factor out common fields (resource handle, dumb). v2: move mapped field to shmem object Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200305013212.130640-1-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-03-09drm: Make drm_pci_agp_init legacyChris Wilson1-12/+12
Pull the drm_pci_agp_init() underneath the legacy ifdeffry alongside its only caller. The diff chooses it to so it by moving drm_pci_agp_destroy earlier, but the important bit is moving the #ifdef earlier before drm_pci_agp_init. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200307093702.2269-1-chris@chris-wilson.co.uk
2020-03-07Revert "drm/panel: simple: Add support for Sharp LQ150X1LG11 panels"Peter Rosin1-27/+0
This reverts commit 0f9cdd743f7f8d470fff51b11250f02fc554cf1b. The interface of the panel is LVDS, not parallel. The color depth is RGB888, not RGB565. The panel has additional features, making it not so simple. The only user (upstream) of this panel is appropriately using panel-lvds. Suggested-by: Thierry Reding <thierry.reding@gmail.com> Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200305130536.26011-1-peda@axentia.se
2020-03-07drm/vboxvideo/vboxvideo.h: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200305105558.GA19124@embeddedor
2020-03-06dt-bindings: convert rockchip-drm.txt to rockchip-drm.yamlDafna Hirschfeld2-19/+40
convert the binding file rockchip-drm.txt to yaml format. This was tested and verified on ARM and ARM64 with: make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/display/rockchip/rockchip-drm.yaml Changes since v2: - add a missing ">" sign in maintainers list - change the licens to GPL-2.0-only - add "additionalProperties: false" - change the commit message to conform that it was tested on both ARM and ARM64 Changes since v1: - fixed worng sign-off - fixed the path of the $id property to be the path of the yaml file Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200121154314.3444-1-dafna.hirschfeld@collabora.com
2020-03-06drm/pci: Unexport drm_get_pci_devDaniel Vetter2-32/+5
Only user left is the shadow attach for legacy drivers. v2: Shift the #ifdef CONFIG_DRM_LEGACY to now also include drm_get_pci_dev() (Thomas) Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200225165835.2394442-1-daniel.vetter@ffwll.ch
2020-03-06drm/todo: Update drm_fb_helper tasksPankaj Bharadiya1-17/+0
drm_fb_helper tasks are completed now hence remove them from todo list. Changes since v1: * remove entire drm_fb_helper tasks from todo list. Daniel's "64914da24ea9 drm/fbdev-helper: don't force restores" already fixes first one (Daniel) Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-8-pankaj.laxminarayan.bharadiya@intel.com
2020-03-06drm/fb-helper: Remove drm_fb_helper add, add_all and remove connector functionsPankaj Bharadiya1-21/+0
drm_fb_helper_single_add_all_connectors(), drm_fb_helper_add_one_connector() and drm_fb_helper_remove_one_connector() don't keep an array of connectors anymore and are just dummy. Now we have no callers to these functions hence remove them. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-7-pankaj.laxminarayan.bharadiya@intel.com
2020-03-06drm: Remove drm_fb_helper add, add all and remove connector callsPankaj Bharadiya14-62/+0
drm_fb_helper_{add,remove}_one_connector() and drm_fb_helper_single_add_all_connectors() are dummy functions now and serve no purpose. Hence remove their calls. This is the preparatory step for removing the drm_fb_helper_{add,remove}_one_connector() functions from drm_fb_helper.h This removal is done using below sementic patch and unused variable compilation warnings are fixed manually. @@ @@ - drm_fb_helper_single_add_all_connectors(...); @@ expression e1; statement S; @@ - e1 = drm_fb_helper_single_add_all_connectors(...); - S @@ @@ - drm_fb_helper_add_one_connector(...); @@ @@ - drm_fb_helper_remove_one_connector(...); Changes since v1: * Squashed warning fixes into the patch that introduced the warnings (into 5/7) (Laurent, Emil, Lyude) Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-6-pankaj.laxminarayan.bharadiya@intel.com
2020-03-06drm/i915/display: Remove drm_fb_helper_{add,remove}_one_connector callsPankaj Bharadiya1-12/+0
drm_fb_helper_{add,remove}_one_connector() are dummy functions now and serve no purpose. Hence remove their calls. This is the preparatory step for removing the drm_fb_helper_{add,remove}_one_connector() functions from drm_fb_helper.h Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-5-pankaj.laxminarayan.bharadiya@intel.com
2020-03-06drm/amdgpu: Remove drm_fb_helper_{add,remove}_one_connector callsPankaj Bharadiya1-13/+0
drm_fb_helper_{add,remove}_one_connector() are dummy functions now and serve no purpose. Hence remove their calls. This is the preparatory step for removing the drm_fb_helper_{add,remove}_one_connector() functions from drm_fb_helper.h Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-4-pankaj.laxminarayan.bharadiya@intel.com
2020-03-06drm/radeon: remove radeon_fb_{add,remove}_connector functionsPankaj Bharadiya3-25/+0
drm_fb_helper_{add,remove}_one_connector() are dummy functions now and serve no purpose. Hence remove their calls. This is the preparatory step for removing the drm_fb_helper_{add,remove}_one_connector() functions from drm_fb_helper.h Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-3-pankaj.laxminarayan.bharadiya@intel.com
2020-03-06drm: Remove unused arg from drm_fb_helper_initPankaj Bharadiya13-21/+15
The max connector argument for drm_fb_helper_init() isn't used anymore hence remove it. All the drm_fb_helper_init() calls are modified with below sementic patch. @@ expression E1, E2, E3; @@ - drm_fb_helper_init(E1,E2, E3) + drm_fb_helper_init(E1,E2) Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200305120434.111091-2-pankaj.laxminarayan.bharadiya@intel.com
2020-03-06MAINTAINERS: adjust to reservation.h renamingLukas Bulwahn1-1/+1
Commit 52791eeec1d9 ("dma-buf: rename reservation_object to dma_resv") renamed include/linux/reservation.h to include/linux/dma-resv.h, but missed the reference in the MAINTAINERS entry. Since then, ./scripts/get_maintainer.pl --self-test complains: warning: no file matches F: include/linux/reservation.h Adjust the DMA BUFFER SHARING FRAMEWORK entry in MAINTAINERS. Co-developed-by: Sebastian Duda <sebastian.duda@fau.de> Signed-off-by: Sebastian Duda <sebastian.duda@fau.de> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/356414/ Signed-off-by: Christian König <christian.koenig@amd.com>
Powered by cgit, Gruvboxed by Blaster4385.