aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-28powerpc: cell: Use the core flow handlerThomas Gleixner2-49/+2
The core handler is a full equivalent replacement. Signed-off-by: Thomas Gleixner <[email protected]>
2011-03-28genirq: Provide edge_eoi flow handlerThomas Gleixner3-0/+50
This is a replacment for the cell flow handler which is in the way of cleanups. Must be selected to avoid general bloat. Signed-off-by: Thomas Gleixner <[email protected]>
2011-03-28genirq: Move INPROGRESS, MASKED and DISABLED state flags to irq_dataThomas Gleixner9-59/+64
We really need these flags for some of the interrupt chips. Move it from internal state to irq_data and provide proper accessors. Signed-off-by: Thomas Gleixner <[email protected]> Cc: David Daney <[email protected]>
2011-03-28Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds5-15/+11
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Ensure that rpc_release_resources_task() can be called twice. NFS: Don't leak RPC clients in NFSv4 secinfo negotiation NFS: Fix a hang in the writeback path
2011-03-28MFD: allow cs5535-mfd to build on X86 onlyAndres Salomon1-1/+1
Stephen ran into the following build error: drivers/mfd/cs5535-mfd.c:30:22: error: asm/olpc.h: No such file or directory olpc.h exists only on x86 (and in the future, ARM). Rather than wrapping the include in an #ifdef, just change cs5535-mfd to only build on x86. Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Andres Salomon <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-28drbd: fix up merge errorLinus Torvalds1-8/+6
In commit 95a0f10cddbf ("drbd: store in-core bitmap little endian, regardless of architecture") drbd had made the sane choice to use little-endian bitmap functions everywhere. However, it used the horrible old functions names from <asm-generic/bitops/le.h>, that were never really meant to be exported. In the meantime, things got cleaned up, and in commit c4945b9ed472 ("asm-generic: rename generic little-endian bitops functions") we renamed the LE bitops to something sane, exactly so that they could be used in random code without people gouging their eyes out when seeing the crazy jumble of letters that were the old internal names. As a result the drbd thing merged cleanly (commit 8d49a77568d1: "Merge branch 'for-2.6.39/drivers' of git://git.kernel.dk/linux-2.6-block"), since there was no data conflict - but the end result obviously doesn't actually compile. Reported-and-tested-by: Ingo Molnar <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Stephen Rothwell <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-03-28mmc: SDHI should depend on SUPERH || ARCH_SHMOBILEGuennadi Liakhovetski1-0/+1
Fix build breakage on platforms, not providing readsw and writesw functions, e.g., on x86(_64). Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Chris Ball <[email protected]>
2011-03-28NOMMU: support SMP dynamic percpu_allocGraf Yang1-0/+32
The percpu code requires more functions to be implemented in the mm core which nommu currently does not provide. So add inline implementations since these are largely meaningless on nommu systems. Signed-off-by: Graf Yang <[email protected]> Signed-off-by: Mike Frysinger <[email protected]> Signed-off-by: David Howells <[email protected]> Acked-by: Greg Ungerer <[email protected]>
2011-03-28NOMMU: percpu should use is_vmalloc_addr().David Howells1-2/+1
per_cpu_ptr_to_phys() uses VMALLOC_START and VMALLOC_END to determine if an address is in the vmalloc() region or not. This is incorrect on NOMMU as there is no real vmalloc() capability (vmalloc() is emulated by kmalloc()). The correct way to do this is to use is_vmalloc_addr(). This encapsulates the vmalloc() region test in MMU mode and just returns 0 in NOMMU mode. On FRV in NOMMU mode, the percpu compilation fails without this patch: mm/percpu.c: In function 'per_cpu_ptr_to_phys': mm/percpu.c:1011: error: 'VMALLOC_START' undeclared (first use in this function) mm/percpu.c:1011: error: (Each undeclared identifier is reported only once mm/percpu.c:1011: error: for each function it appears in.) mm/percpu.c:1012: error: 'VMALLOC_END' undeclared (first use in this function) mm/percpu.c:1018: warning: control reaches end of non-void function Signed-off-by: David Howells <[email protected]>
2011-03-28Merge branch 'x86-platform-next' into x86-platformMatthew Garrett8332-268637/+585058
2011-03-28xo15-ebook: Remove device.wakeup_countMatthew Garrett1-1/+0
This is handled automatically now. Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28ips: use interruptible waits in ips-monitorJesse Barnes1-1/+1
This is what I intended to do since: 1) the driver handles variable waits just fine, and 2) interruptible waits aren't reported as load in the load avg. Reported-and-tested-by: Andreas Hartmann <[email protected]> Signed-off-by: Jesse Barnes <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28acer-wmi: does not poll device status when WMI event is availableLee, Chun-Yi1-2/+18
Acer WMI hotkey event's result include current device status, just need sync the status to killswitch after acer-wmi driver receive hotkey event but not always poll device status. This is good for performance. But, if use EC raw mode, Acer BIOS will not emit wmi event and leave EC to control device status. So, still startup polling job when doesn't detect WMI event GUID or user choice to use ec_raw_mode. Tested on Acer TravelMate 8572 notebook. Cc: Carlos Corbacho <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Corentin Chary <[email protected]> Cc: Thomas Renninger <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28acer-wmi: does not set persistence state by rfkill_init_sw_stateLee, Chun-Yi1-5/+14
Acer BIOS keeps devices state when system reboot, but reset to default device states (Wlan on, Bluetooth off, wwan on) if system cold boot. That means BIOS's initial state is not always real persistence. So, removed rfkill_init_sw_state because it sets initial state to persistence then replicate to other new killswitch when rfkill-input enabled. After removed it, acer-wmi set initial soft-block state after rfkill register, and doesn't allow set_block until rfkill initial finished. Reference: bko#31002 https://bugzilla.kernel.org/show_bug.cgi?id=31002 Cc: Carlos Corbacho <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Corentin Chary <[email protected]> Cc: Oldřich Jedlička <[email protected]> Cc: Johannes Berg <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28platform-drivers: x86: fix common misspellingsLucas De Marchi7-10/+10
Signed-off-by: Lucas De Marchi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28acer-wmi: use pr_<level> for messagesLee, Chun-Yi1-40/+28
acer-wmi: use pr_<level> for messages Cc: Carlos Corbacho <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Corentin Chary <[email protected]> Cc: Dmitry Torokhov <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: potential NULL dereference in show_call()Dan Carpenter1-1/+1
In the earlier check we assumed that "obj" could be NULL. I looked at some of the other places that call evaluate_object() and they check for NULL as well. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: signedness bug in read_brightness()Dan Carpenter1-1/+2
"err" needs to be signed for the error handling to work. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28platform-driver-x86: samsung-laptop: make dmi_check_cb to return 1 instead of 0Axel Lin1-1/+1
dmi_check_system() walks the table running matching functions until someone returns non zero or we hit the end. This patch makes dmi_check_cb to return 1 so dmi_check_system() return immediately when a match is found. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28platform-driver-x86: fix wrong merge for compal-laptop.cAxel Lin1-3/+3
I found the commit 80183a4b "compal-laptop/fujitsu-laptop/msi-laptop: make dmi_check_cb to return 1 instead of 0" has wrong patch merge. The original patch change the return value for dmi_check_cb(): https://lkml.org/lkml/2010/7/2/88 But commit 80183a4b changed the return value for set_backlight_level. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28msi-laptop: use pr_<level> for messagesJoey Lee1-7/+7
msi-laptop: use pr_<level> for messages Cc: Carlos Corbacho <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Corentin Chary <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28Platform: add Samsung Laptop platform driverGreg Kroah-Hartman4-0/+865
This adds the samsung-laptop driver to the kernel. It now supports all known Samsung laptops that use the SABI interface. Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28acer-wmi: Fix WMI IDPali Rohár1-2/+2
This patch change WMI ID to upper characters. With this patch module acer-wmi is automatically loaded when WMI ID is detected. Signed-off-by: Pali Rohár <[email protected]> Tested-by: Pali Rohár <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28acer-wmi: deactive mail led when power offPali Rohár1-0/+14
This patch deactive mail led when laptop is going to hibernete/suspend or power off. After resume from hibernate/suspend correctly restore mail led state. Signed-off-by: Pali Rohár <[email protected]> Tested-by: Pali Rohár <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28msi-laptop: send out touchpad on/off keyLee, Chun-Yi1-2/+79
MSI BIOS's raw behavior is send out KEY_TOUCHPAD_TOGGLE key when user pressed touchpad hotkey. Actually, we can capture the real touchpad status by read 0xE4 EC address on MSI netbook/notebook. So, add msi-laptop input device for send out KEY_TOUCHPAD_ON or KEY_TOUCHPAD_OFF key when user pressed Fn+F3 touchpad hotkey. It leave userland applications to know the real touchpad status. Tested on MSI netbook U-100, U-115, U160(N051), U160DX, N014, N034 Tested on MSI notebook CR620 Cc: Carlos Corbacho <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Corentin Chary <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28acer-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLELee, Chun-Yi1-1/+1
Set the touchpad toggle key code from F22 to KEY_TOUCHPAD_TOGGLE, and userspace should use udev's key re-mapping facilities while X is unable to process keycodes above 255 to adjust to the keycode. Cc: Matthew Garrett <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Corentin Chary <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28platform-driver-x86: intel_mid_thermal: fix unterminated platform_device_id ↵Axel Lin1-0/+1
table The platform_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28sony-laptop: potential null dereferenceDan Carpenter1-1/+5
In the original code, if "device_enum" was NULL then it would dereference it when it printed the error message. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28sony-laptop: handle allocation failuresDan Carpenter1-0/+4
Return -ENOMEM if kzalloc() fails. The callers already handle error returns. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28sony-laptop: return negative on failure in sony_nc_add()Dan Carpenter1-2/+4
There were two places in sony_nc_add() where we returned zero on failure instead of a negative error code. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28sony-laptop: make a couple variables staticDan Carpenter1-2/+2
Sparse complains that these variables should be static. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28eeepc-wmi: set the touchpad toggle key code to KEY_TOUCHPAD_TOGGLEKeng-Yu Lin1-1/+1
Signed-off-by: Keng-Yu Lin <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28ideapad: read brightness setting on brightness key notifyIke Panhc1-0/+2
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=25922 On ideapad Y530, the brightness key notify will be blocked if the last notify is not responsed by getting the brightness value. Read value when we get the notify shall fix the problem and will not have any difference on other ideapads. Signed-off-by: Ike Panhc <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28eeepc-wmi: kconfig changes to fix build errorsRandy Dunlap1-0/+1
Fix eeepc-wmi build when CONFIG_HOTPLUG_PCI is not enabled: eeepc-wmi.c:(.text+0x3bc5e9): undefined reference to `pci_hp_deregister' eeepc-wmi.c:(.text+0x3bcca4): undefined reference to `__pci_hp_register' Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28eeepc-wmi: restore KEY_CAMERA_* keys lost in 190ca27Corentin Chary1-0/+6
Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: add hwmon interface and pwm1Corentin Chary2-0/+129
Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: add some common device ids and method idsCorentin Chary1-7/+37
I also found some leds ids (0x00020011-0x00020016 and 0x00040015), but since they are not really present on the notebook, I can't guess their name . Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-nb-wmi: Asus Notebooks WMI DriverCorentin Chary4-28/+117
Introduce a new driver for Asus Notebooks shipped with a WMI device instead of the old ACPI device. The WMI device is almost the same as the one present in Eee PC, but the event guid and the keymap are different. The keymap comes from asus-laptop module. On Asus notebooks, when you call the WMI device, you always need a 64bit buffer, even if you only want to get the state of a device (tested on a G73). Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: allow debugfs interface to call arbitrary methodCorentin Chary1-2/+45
Also add some # format flags to debugfs output. Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: add calls to INIT, SPEC and SFUN on initCorentin Chary1-0/+28
INIT() call is needed to enable hotkeys on G73 SPEC() and SFUN() allow us to know more about available features. Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: fix and clean backlight codeCorentin Chary1-15/+29
Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: try to guess the right DSTS methodsCorentin Chary1-33/+66
This is tricky, new WMI aware notebooks seems to use 0x53545344 while Eee PCs are using 0x53544344. But there is no way to know if there is an Eee PC in that wild that is using 0x53545344 or a notebook using 0x53544344. So the driver try to guess the available DSTS method ... But most Eee PCs never return 0xFFFFFFFE when a method is not available, they return 0 instead (and that's useless). So, first, try 0x53544344 then 0x53545344. We will find a better way when we got more data. Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: factorise wmi_evaluate_method callCorentin Chary1-97/+65
This patch create a single function to call the WMI methods. This function handle inexistent methods (when implemented by the WMI devices, and this is not the case on Eee PCs), ACPI errors, etc.. Also pack struct bios_arg, and make sure that we always send a 64bit buffer when calling a WMI method, because this is needed on Asus notebooks. Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: handle "unknown status" bitCorentin Chary1-0/+6
Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: introduce struct asus_rfkillCorentin Chary1-56/+59
First, this allow use to remove the custom asusrfkill_wlan_query, but this will also allow us to give struct asus_wmi * to get_devstate/set_devstate later. Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: minor cleanupsCorentin Chary2-18/+18
Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28eeepc-wmi: asus generic asus-wmi.ko moduleCorentin Chary6-498/+681
New Asus notebooks are using a WMI device similar to the one used in Eee PCs. Since we don't want to load eeepc-wmi module on Asus notebooks, and we want to keep the eeepc-wmi module for backward compatibility, this patch introduce a new module, named asus-wmi, that will be used by eeepc-wmi and the new Asus Notebook WMI Driver. eeepc-wmi's input device strings (device name and phys) are kept, but rfkill and led names are changed (s/eeepc/asus/). This should not break anything since rfkill are used by type or index, not by name, and the eeepc::touchpad led wasn't working correctly before 2.6.39 anyway. Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28asus-wmi: move generic code to asus-wmiCorentin Chary2-1/+1
New Asus notebooks are using a WMI device similar to the one used in Eee PCs. Since we don't want to load a module named eeepc-laptop on Asus Notebooks, start by copying all the code to asus-wmi.c. Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28medfield: Add Thermal DriverDurgadoss R3-1/+584
This is the basic thermal sensor driver for Intel MID platform using the Medfield chipset. It plugs in via the thermal drivers and provides sensor readings for the device sensors. Signed-off-by: Durgadoss R <[email protected]> Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2011-03-28hp-wmi: add rfkill support for wireless query 0x1bAnssi Hannula1-1/+187
Some recent HP laptops use a new wireless query command type 0x1b. Add support for it. Tested on HP Mini 5102. Signed-off-by: Anssi Hannula <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.