aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-08-14Merge branch 'pm-cpufreq'Rafael J. Wysocki4-113/+229
* pm-cpufreq: cpufreq: intel_pstate: Implement passive mode with HWP enabled
2020-08-14igc: Fix PTP initializationVinicius Costa Gomes2-5/+2
Right now, igc_ptp_reset() is called from igc_reset(), which is called from igc_probe() before igc_ptp_init() has a chance to run. It is detected as an attempt to use an spinlock without registering its key first. See log below. To avoid this problem, simplify the initialization: igc_ptp_init() is only called from igc_probe(), and igc_ptp_reset() is only called from igc_reset(). [ 2.736332] INFO: trying to register non-static key. [ 2.736902] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10 [ 2.737513] the code is fine but needs lockdep annotation. [ 2.737513] turning off the locking correctness validator. [ 2.737515] CPU: 8 PID: 239 Comm: systemd-udevd Tainted: G E 5.8.0-rc7+ #13 [ 2.737515] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019 [ 2.737516] Call Trace: [ 2.737521] dump_stack+0x78/0xa0 [ 2.737524] register_lock_class+0x6b1/0x6f0 [ 2.737526] ? lockdep_hardirqs_on_prepare+0xca/0x160 [ 2.739177] ? _raw_spin_unlock_irq+0x24/0x50 [ 2.739179] ? trace_hardirqs_on+0x1c/0xf0 [ 2.740820] __lock_acquire+0x56/0x1ff0 [ 2.740823] ? __schedule+0x30c/0x970 [ 2.740825] lock_acquire+0x97/0x3e0 [ 2.740830] ? igc_ptp_reset+0x35/0xf0 [igc] [ 2.740833] ? schedule_hrtimeout_range_clock+0xb7/0x120 [ 2.742507] _raw_spin_lock_irqsave+0x3a/0x50 [ 2.742512] ? igc_ptp_reset+0x35/0xf0 [igc] [ 2.742515] igc_ptp_reset+0x35/0xf0 [igc] [ 2.742519] igc_reset+0x96/0xd0 [igc] [ 2.744148] igc_probe+0x68f/0x7d0 [igc] [ 2.745796] local_pci_probe+0x3d/0x70 [ 2.745799] pci_device_probe+0xd1/0x190 [ 2.745802] really_probe+0x15a/0x3f0 [ 2.759936] driver_probe_device+0xe1/0x150 [ 2.759937] device_driver_attach+0xa8/0xb0 [ 2.761786] __driver_attach+0x89/0x150 [ 2.761786] ? device_driver_attach+0xb0/0xb0 [ 2.761787] ? device_driver_attach+0xb0/0xb0 [ 2.761788] bus_for_each_dev+0x66/0x90 [ 2.765012] bus_add_driver+0x12e/0x1f0 [ 2.765716] driver_register+0x8b/0xe0 [ 2.766418] ? 0xffffffffc0230000 [ 2.767119] do_one_initcall+0x5a/0x310 [ 2.767826] ? kmem_cache_alloc_trace+0xe9/0x200 [ 2.768528] do_init_module+0x5c/0x260 [ 2.769206] __do_sys_finit_module+0x93/0xe0 [ 2.770048] do_syscall_64+0x46/0xa0 [ 2.770716] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2.771396] RIP: 0033:0x7f83534589e0 [ 2.772073] Code: 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 2e 2e 2e 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 80 24 0d 00 f7 d8 64 89 01 48 [ 2.772074] RSP: 002b:00007ffd31d0ed18 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 2.774854] RAX: ffffffffffffffda RBX: 000055d52816aba0 RCX: 00007f83534589e0 [ 2.774855] RDX: 0000000000000000 RSI: 00007f83535b982f RDI: 0000000000000006 [ 2.774855] RBP: 00007ffd31d0ed60 R08: 0000000000000000 R09: 00007ffd31d0ed30 [ 2.774856] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000000 [ 2.774856] R13: 0000000000020000 R14: 00007f83535b982f R15: 000055d527f5e120 Fixes: 5f2958052c58 ("igc: Add basic skeleton for PTP") Signed-off-by: Vinicius Costa Gomes <[email protected]> Reviewed-by: Andre Guedes <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-08-14dt-bindings: Remove more cases of 'allOf' containing a '$ref'Rob Herring12-70/+49
Another wack-a-mole pass of killing off unnecessary 'allOf + $ref' usage. json-schema versions draft7 and earlier have a weird behavior in that any keywords combined with a '$ref' are ignored (silently). The correct form was to put a '$ref' under an 'allOf'. This behavior is now changed in the 2019-09 json-schema spec and '$ref' can be mixed with other keywords. The json-schema library doesn't yet support this, but the tooling now does a fixup for this and either way works. This has been a constant source of review comments, so let's change this treewide so everyone copies the simpler syntax. Signed-off-by: Rob Herring <[email protected]>
2020-08-14dt-bindings: Whitespace clean-ups in schema filesRob Herring166-1118/+1107
Clean-up incorrect indentation, extra spaces, long lines, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (which I plan to integrate into the checks). Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Acked-by: Sam Ravnborg <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2020-08-14perf ftrace: Make option description initials all capital lettersArnaldo Carvalho de Melo1-14/+14
And improve a bit the -m description to state that a B/K/M/G suffix is needed. Cc: Changbin Du <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf build-ids: Fall back to debuginfod query if debuginfo not foundFrank Ch. Eigler6-1/+43
During a perf-record, use the -ldebuginfod API to query a debuginfod server, should the debug data not be found in the usual system locations. If successful, the usual $HOME/.debug dir is populated. Tested with: $ find . . ./ctags-debuginfo-5.8-26.fc31.x86_64.rpm ./usr ./usr/lib ./usr/lib/debug ./usr/lib/debug/.build-id ./usr/lib/debug/.build-id/ca ./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d ./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d.debug ./usr/lib/debug/usr ./usr/lib/debug/usr/bin ./usr/lib/debug/usr/bin/ctags-5.8-26.fc31.x86_64.debug $ debuginfod -F . ... $ rm -rf ~/.debug/ ; mkdir ~/.debug $ perf record make tags BUILD: Doing 'make -j8' parallel build GEN tags [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.107 MB perf.data (1483 samples) ] $ find ~/.debug | grep ctags /home/jolsa/.debug/usr/bin/ctags /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes $ rm -rf ~/.debug/ ; mkdir ~/.debug $ DEBUGINFOD_URLS=http://localhost:8002 perf record make tags BUILD: Doing 'make -j8' parallel build GEN tags [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.108 MB perf.data (1531 samples) ] $ find ~/.debug | grep ctag /home/jolsa/.debug/usr/bin/ctags /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/debug /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes Note the 'debug' file is created in the last run. Note that currently the debuginfo data are downloaded only on record path, we still need add this support to perf build-id/report.. and test ;-) Tested-by: Jiri Olsa <[email protected]> Signed-off-by: Jiri Olsa <[email protected]> Signed-off-by: Frank Ch. Eigler <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf bench numa: Remove dead code in parse_nodes_opt()Peng Fan1-2/+0
In the function parse_nodes_opt(), the statement "return 0;" is dead code, remove it. Signed-off-by: Peng Fan <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf stat: Update POWER9 metrics to utilize other metricsPaul A. Clarke1-24/+24
These changes take advantage of the new capability added in merge commit 00e4db51259a5f936fec1424b884f029479d3981 "Allow using computed metrics in calculating other metrics". The net is a simplification of the expressions for a handful of metrics, but no functional change. Signed-off-by: Paul Clarke <[email protected]> Reviewed-by: Kajol Jain <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add change logChangbin Du1-0/+1
Add a change log after previous enhancements. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf: ftrace: Add set_tracing_options() to set all trace optionsChangbin Du1-55/+63
Now the __cmd_ftrace() becomes a bit long. This moves the trace option setting code to a separate function set_tracing_options(). Suggested-by: Namhyung Kim <[email protected]> Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add option --tid to filter by thread idChangbin Du2-0/+6
This allows us to trace single thread instead of the whole process. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add option -D/--delay to delay tracingChangbin Du2-3/+20
This adds an option '-D/--delay' to allow us to start tracing some times later after workload is launched. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf: ftrace: Allow set graph depth by '--graph-opts'Changbin Du2-7/+3
This is to have a consistent view of all graph tracer options. The original option '--graph-depth' is marked as deprecated. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add support for trace option tracing_threshChangbin Du2-1/+26
This adds an option '--graph-opts thresh' to setup trace duration threshold for funcgraph tracer. $ sudo ./perf ftrace -G '*' --graph-opts thresh=100 3) ! 184.060 us | } /* schedule */ 3) ! 185.600 us | } /* exit_to_usermode_loop */ 2) ! 225.989 us | } /* schedule_idle */ 2) # 4140.051 us | } /* do_idle */ Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add option 'verbose' to show more info for graph tracerChangbin Du2-1/+29
Sometimes we want ftrace display more and longer information about the trace. $ sudo perf ftrace -G '*' 2) 0.979 us | mutex_unlock(); 2) 1.540 us | __fsnotify_parent(); 2) 0.433 us | fsnotify(); $ sudo perf ftrace -G '*' --graph-opts verbose 14160.770883 | 0) <...>-47814 | .... | 1.289 us | mutex_unlock(); 14160.770886 | 0) <...>-47814 | .... | 1.624 us | __fsnotify_parent(); 14160.770887 | 0) <...>-47814 | .... | 0.636 us | fsnotify(); 14160.770888 | 0) <...>-47814 | .... | 0.328 us | __sb_end_write(); 14160.770888 | 0) <...>-47814 | d... | 0.430 us | fpregs_assert_state_consistent(); 14160.770889 | 0) <...>-47814 | d... | | do_syscall_64() { 14160.770889 | 0) <...>-47814 | .... | | __x64_sys_close() { Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add support for tracing option 'irq-info'Changbin Du2-1/+21
This adds support to display irq context info for function tracer. To do this, just specify a '--func-opts irq-info' option. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add support for trace option funcgraph-irqsChangbin Du2-1/+21
This adds an option '--graph-opts noirqs' to filter out functions executed in irq context. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add support for trace option sleep-timeChangbin Du2-0/+45
This adds an option '--graph-opts nosleep-time' which allow us only to measure on-CPU time. This option is function_graph tracer only. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add support for tracing option 'func_stack_trace'Changbin Du2-0/+46
This adds support to display call trace for function tracer. To do this, just specify a '--func-opts call-graph' option. Example: $ sudo perf ftrace -T vfs_read --func-opts call-graph iio-sensor-prox-855 [003] 6168.369657: vfs_read <-ksys_read iio-sensor-prox-855 [003] 6168.369677: <stack trace> => vfs_read => ksys_read => __x64_sys_read => do_syscall_64 => entry_SYSCALL_64_after_hwframe ... Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf tools: Add general function to parse sublevel optionsChangbin Du4-44/+99
This factors out a general function perf_parse_sublevel_options() to parse sublevel options. The 'sublevel' options is something like the '--debug' options which allow more sublevel options. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add option '--inherit' to trace children processesChangbin Du2-0/+41
This adds an option '--inherit' to allow us trace children processes spawned by our target. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Show trace column headerChangbin Du1-0/+3
This makes 'perf ftrace' display column header before printing trace. $ sudo perf ftrace # tracer: function # # entries-in-buffer/entries-written: 0/0 #P:8 # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-9246 [006] 10726.262760: mutex_unlock <-rb_simple_write <...>-9246 [006] 10726.262764: __fsnotify_parent <-vfs_write <...>-9246 [006] 10726.262765: fsnotify <-vfs_write <...>-9246 [006] 10726.262766: __sb_end_write <-vfs_write <...>-9246 [006] 10726.262767: fpregs_assert_state_consistent <-do_syscall_64 Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer sizeChangbin Du2-0/+60
This adds an option '-m/--buffer-size' to allow us set the size of per-cpu tracing buffer. Committer testing: Before running with this option: # find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat 1408 1408 1408 1408 1408 1408 1408 1408 1408 # Then, run: # perf ftrace -m 2048K | head -10 2) | mutex_unlock() { 2) ==========> | 2) | smp_irq_work_interrupt() { 2) | irq_enter() { 2) 0.121 us | rcu_irq_enter(); 2) 0.128 us | irqtime_account_irq(); 2) 0.719 us | } 2) | __wake_up() { 2) | __wake_up_common_lock() { 2) 0.105 us | _raw_spin_lock_irqsave(); # Now look at those tracefs knobs: # find /sys/kernel/tracing/ -name buffer_size_kb | xargs cat 2048 2048 2048 2048 2048 2048 2048 2048 2048 # This should be similar to the -m option in the other perf tools, such as 'perf record', 'perf trace', etc. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Factor out function write_tracing_file_int()Changbin Du1-5/+12
We will reuse this function later. Signed-off-by: Changbin Du <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Add option '-F/--funcs' to list available functionsChangbin Du2-0/+50
This adds an option '-F/--funcs' to list all available functions to trace, which is read from tracing file 'available_filter_functions'. $ sudo ./perf ftrace -F | head trace_initcall_finish_cb initcall_blacklisted do_one_initcall do_one_initcall trace_initcall_start_cb run_init_process try_to_run_init_process match_dev_by_label match_dev_by_uuid rootfs_init_fs_context $ Committer notes: This is the same command line option and for the same purpose as in 'perf probe'. Signed-off-by: Changbin Du <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14perf ftrace: Select function/function_graph tracer automaticallyChangbin Du3-23/+48
The '-g/-G' options have already implied function_graph tracer should be used instead of function tracer. So we don't need extra option '--tracer' in this case. This patch changes the behavior as below: - If '-g' or '-G' option is on, then function_graph tracer is used. - If '-T' or '-N' option is on, then function tracer is used. - The function_graph has priority over function tracer. - The option '--tracer' only take effect if neither -g/-G nor -T/-N is specified. Here are some examples. This will start tracing all functions using default tracer: $ sudo perf ftrace This will trace all functions using function graph tracer: $ sudo perf ftrace -G '*' This will trace function vfs_read using function graph tracer: $ sudo perf ftrace -G vfs_read This will trace function vfs_read using function tracer: $ sudo perf ftrace -T vfs_read Committer notes: Using '-h -G' will tell what that option is about, so to further clarify the above examples: # perf ftrace -h -G -G, --graph-funcs <func> Set graph filter on given functions # perf ftrace -h -g -g, --nograph-funcs <func> Set nograph filter on given functions # perf ftrace -h -T -T, --trace-funcs <func> trace given functions only # perf ftrace -h -N -N, --notrace-funcs <func> do not trace given functions # Signed-off-by: Changbin Du <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Steven Rostedt (VMware) <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2020-08-14can: j1939: transport: j1939_xtp_rx_dat_one(): compare own packets to detect ↵Oleksij Rempel1-1/+14
corruptions Since the stack relays on receiving own packets, it was overwriting own transmit buffer from received packets. At least theoretically, the received echo buffer can be corrupt or changed and the session partner can request to resend previous data. In this case we will re-send bad data. With this patch we will stop to overwrite own TX buffer and use it for sanity checking. Signed-off-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-08-14can: j1939: transport: add j1939_session_skb_find_by_offset() functionOleksij Rempel1-7/+15
Sometimes it makes no sense to search the skb by pkt.dpo, since we need next the skb within the transaction block. This may happen if we have an ETP session with CTS set to less than 255 packets. After this patch, we will be able to work with ETP sessions where the block size (ETP.CM_CTS byte 2) is less than 255 packets. Reported-by: Henrique Figueira <[email protected]> Reported-by: https://github.com/linux-can/can-utils/issues/228 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-08-14can: j1939: socket: j1939_sk_bind(): make sure ml_priv is allocatedOleksij Rempel1-0/+8
This patch adds check to ensure that the struct net_device::ml_priv is allocated, as it is used later by the j1939 stack. The allocation is done by all mainline CAN network drivers, but when using bond or team devices this is not the case. Bail out if no ml_priv is allocated. Reported-by: [email protected] Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: linux-stable <[email protected]> # >= v5.4 Signed-off-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-08-14can: j1939: transport: j1939_session_tx_dat(): fix use-after-free read in ↵Oleksij Rempel1-0/+15
j1939_tp_txtimer() The current stack implementation do not support ECTS requests of not aligned TP sized blocks. If ECTS will request a block with size and offset spanning two TP blocks, this will cause memcpy() to read beyond the queued skb (which does only contain one TP sized block). Sometimes KASAN will detect this read if the memory region beyond the skb was previously allocated and freed. In other situations it will stay undetected. The ETP transfer in any case will be corrupted. This patch adds a sanity check to avoid this kind of read and abort the session with error J1939_XTP_ABORT_ECTS_TOO_BIG. Reported-by: [email protected] Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: linux-stable <[email protected]> # >= v5.4 Signed-off-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-08-14can: j1939: transport: j1939_simple_recv(): ignore local J1939 messages send ↵Oleksij Rempel2-0/+5
not by J1939 stack In current J1939 stack implementation, we process all locally send messages as own messages. Even if it was send by CAN_RAW socket. To reproduce it use following commands: testj1939 -P -r can0:0x80 & cansend can0 18238040#0123 This step will trigger false positive not critical warning: j1939_simple_recv: Received already invalidated message With this patch we add additional check to make sure, related skb is own echo message. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-08-14sched/debug: Fix the alignment of the show-state debug outputLibing Zhou1-11/+4
Current sysrq(t) output task fields name are not aligned with actual task fields value, e.g.: kernel: sysrq: Show State kernel: task PC stack pid father kernel: systemd S12456 1 0 0x00000000 kernel: Call Trace: kernel: ? __schedule+0x240/0x740 To make it more readable, print fields name together with task fields value in the same line, with fixed width: kernel: sysrq: Show State kernel: task:systemd state:S stack:12920 pid: 1 ppid: 0 flags:0x00000000 kernel: Call Trace: kernel: __schedule+0x282/0x620 Signed-off-by: Libing Zhou <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14perf/x86/rapl: Add support for Intel SPR platformZhang Rui1-0/+20
Intel SPR platform uses fixed 16 bit energy unit for DRAM RAPL domain, and fixed 0 bit energy unit for Psys RAPL domain. After this, on SPR platform the energy counters appear in perf list. Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Kan Liang <[email protected]> Acked-by: Len Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14perf/x86/rapl: Support multiple RAPL unit quirksZhang Rui1-9/+15
There will be more platforms with different fixed energy units. Enhance the code to support different RAPL unit quirks for different platforms. Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Kan Liang <[email protected]> Reviewed-by: Len Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14perf/x86/rapl: Fix missing psys sysfs attributesZhang Rui1-1/+1
This fixes a problem introduced by commit: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface") that perf event sysfs attributes for psys RAPL domain are missing. Fixes: 5fb5273a905c ("perf/x86/rapl: Use new MSR detection interface") Signed-off-by: Zhang Rui <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Reviewed-by: Kan Liang <[email protected]> Reviewed-by: Len Brown <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14can: j1939: fix kernel-infoleak in j1939_sk_sock2sockaddr_can()Eric Dumazet1-0/+5
syzbot found that at least 2 bytes of kernel information were leaked during getsockname() on AF_CAN CAN_J1939 socket. Since struct sockaddr_can has in fact two holes, simply clear the whole area before filling it with useful data. BUG: KMSAN: kernel-infoleak in kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 CPU: 0 PID: 8466 Comm: syz-executor511 Not tainted 5.8.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x21c/0x280 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 kmsan_internal_check_memory+0x238/0x3d0 mm/kmsan/kmsan.c:423 kmsan_copy_to_user+0x81/0x90 mm/kmsan/kmsan_hooks.c:253 instrument_copy_to_user include/linux/instrumented.h:91 [inline] _copy_to_user+0x18e/0x260 lib/usercopy.c:39 copy_to_user include/linux/uaccess.h:186 [inline] move_addr_to_user+0x3de/0x670 net/socket.c:237 __sys_getsockname+0x407/0x5e0 net/socket.c:1909 __do_sys_getsockname net/socket.c:1920 [inline] __se_sys_getsockname+0x91/0xb0 net/socket.c:1917 __x64_sys_getsockname+0x4a/0x70 net/socket.c:1917 do_syscall_64+0xad/0x160 arch/x86/entry/common.c:386 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x440219 Code: Bad RIP value. RSP: 002b:00007ffe5ee150c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000033 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440219 RDX: 0000000020000240 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401a20 R13: 0000000000401ab0 R14: 0000000000000000 R15: 0000000000000000 Local variable ----address@__sys_getsockname created at: __sys_getsockname+0x91/0x5e0 net/socket.c:1894 __sys_getsockname+0x91/0x5e0 net/socket.c:1894 Bytes 2-3 of 24 are uninitialized Memory access of size 24 starts at ffff8880ba2c7de8 Data copied to user address 0000000020000100 Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Cc: Robin van der Gracht <[email protected]> Cc: Oleksij Rempel <[email protected]> Cc: Pengutronix Kernel Team <[email protected]> Cc: [email protected] Acked-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2020-08-14netfilter: ebtables: reject bogus getopt len valueFlorian Westphal1-0/+4
syzkaller reports splat: ------------[ cut here ]------------ Buffer overflow detected (80 < 137)! Call Trace: do_ebt_get_ctl+0x2b4/0x790 net/bridge/netfilter/ebtables.c:2317 nf_getsockopt+0x72/0xd0 net/netfilter/nf_sockopt.c:116 ip_getsockopt net/ipv4/ip_sockglue.c:1778 [inline] caused by a copy-to-user with a too-large "*len" value. This adds a argument check on *len just like in the non-compat version of the handler. Before the "Fixes" commit, the reproducer fails with -EINVAL as expected: 1. core calls the "compat" getsockopt version 2. compat getsockopt version detects the *len value is possibly in 64-bit layout (*len != compat_len) 3. compat getsockopt version delegates everything to native getsockopt version 4. native getsockopt rejects invalid *len -> compat handler only sees len == sizeof(compat_struct) for GET_ENTRIES. After the refactor, event sequence is: 1. getsockopt calls "compat" version (len != native_len) 2. compat version attempts to copy *len bytes, where *len is random value from userspace Fixes: fc66de8e16ec ("netfilter/ebtables: clean up compat {get, set}sockopt handling") Reported-by: [email protected] Signed-off-by: Florian Westphal <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-08-14kconfig: qconf: move setOptionMode() to ConfigList from ConfigViewMasahiro Yamada2-28/+27
ConfigView::setOptionMode() only gets access to the 'list' member. Move it to the more relevant ConfigList class. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: do not limit the pop-up menu to the first rowMasahiro Yamada1-34/+34
If you right-click the first row in the option tree, the pop-up menu shows up, but if you right-click the second row or below, the event is ignored due to the following check: if (e->y() <= header()->geometry().bottom()) { Perhaps, the intention was to show the pop-menu only when the tree header was right-clicked, but this handler is not called in that case. Since the origin of e->y() starts from the bottom of the header, this check is odd. Going forward, you can right-click anywhere in the tree to get the pop-up menu. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: refactor icon setupsMasahiro Yamada2-14/+27
These icon data are used by ConfigItem, but stored in each instance of ConfigView. There is no point to keep the same data in each of 3 instances, "menu", "config", and "search". Move the icon data to the more relevant ConfigItem class, and make them static members. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: remove unused voidPix, menuInvPixMasahiro Yamada2-2/+2
These are initialized, but not used by anyone. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: remove ConfigItem::text/setTextMasahiro Yamada1-8/+0
Use QTreeWidgetItem::text/setText directly Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: remove ConfigList::addColumn/removeColumnMasahiro Yamada2-19/+11
Use QTreeView::showColumn/hideColumn directly. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: remove ConfigItem::pixmap/setPixmapMasahiro Yamada2-19/+11
Use QTreeWidgetItem::icon/setIcon directly. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: drop more localization codeMasahiro Yamada1-8/+3
This is a remnant of commit 694c49a7c01c ("kconfig: drop localization support"). Get it back to the code prior to commit 3b9fa0931dd8 ("[PATCH] Kconfig i18n support"). Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: remove 'parent' from ConfigList::updateMenuList()Masahiro Yamada2-10/+10
All the call-sites of this function pass 'this' to the first argument. So, 'parent' is always the 'this' pointer. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: remove unused argument from ConfigView::updateList()Masahiro Yamada2-5/+5
Now that ConfigList::updateList() takes no argument, the 'item' argument ConfigView::updateList() is no longer used. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: remove unused argument from ConfigList::updateList()Masahiro Yamada2-5/+5
This function allocates 'item' before using it, so the argument 'item' is always shadowed. Remove the meaningless argument. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: omit parent to QHBoxLayout()Masahiro Yamada1-1/+2
Instead of passing 0 (i.e. nullptr), leave it empty. Signed-off-by: Masahiro Yamada <[email protected]>
2020-08-14kconfig: qconf: remove name from ConfigSearchWindow constructorMasahiro Yamada2-24/+22
This constructor is only called with "search" as the second argument. Hard-code the name in the constructor, and drop it from the function argument. Signed-off-by: Masahiro Yamada <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.