aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-14pinctrl: ocelot: Fix interrupt controllerHoratiu Vultur1-14/+97
When an external device generated a level based interrupt then the interrupt controller could miss the interrupt. The reason is that the interrupt controller can detect only link changes. In the following example, if there is a PHY that generates an interrupt then the following would happen. The GPIO detected that the interrupt line changed, and then the 'ocelot_irq_handler' was called. Here it detects which GPIO line saw the change and for that will call the following: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask And this works fine for simple cases, but if the PHY generates many interrupts, for example when doing PTP timestamping, then the following could happen. Again the function 'ocelot_irq_handler' will be called and then from here the following could happen: 1. irq_mask 2. phy interrupt routine 3. irq_eoi 4. irq_unmask Right before step 3(irq_eoi), the PHY will generate another interrupt. Now the interrupt controller will acknowledge the change in the interrupt line. So we miss the interrupt. A solution will be to use 'handle_level_irq' instead of 'handle_fasteoi_irq', because for this will change routine order of handling the interrupt. 1. irq_mask 2. irq_ack 3. phy interrupt routine 4. irq_unmask And now if the PHY will generate a new interrupt before irq_unmask, the interrupt controller will detect this because it already acknowledge the change in interrupt line at step 2(irq_ack). But this is not the full solution because there is another issue. In case there are 2 PHYs that share the interrupt line. For example phy1 generates an interrupt, then the following can happen: 1.irq_mask 2.irq_ack 3.phy0 interrupt routine 4.phy1 interrupt routine 5.irq_unmask In case phy0 will generate an interrupt while clearing the interrupt source in phy1, then the interrupt line will be kept down by phy0. So the interrupt controller will not see any changes in the interrupt line. The solution here is to update 'irq_unmask' such that it can detect if the interrupt line is still active or not. And if it is active then call again the procedure to clear the interrupts. But we don't want to do it every time, only if we know that the interrupt controller has not seen already that the interrupt line has changed. While at this, add support also for IRQ_TYPE_LEVEL_LOW. Fixes: be36abb71d878f ("pinctrl: ocelot: add support for interrupt controller") Signed-off-by: Horatiu Vultur <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2022-09-14gpio: mt7621: Make the irqchip immutableSergio Paracuellos1-6/+15
Commit 6c846d026d49 ("gpio: Don't fiddle with irqchips marked as immutable") added a warning to indicate if the gpiolib is altering the internals of irqchips. Following this change the following warnings are now observed for the mt7621 driver: gpio gpiochip0: (1e000600.gpio-bank0): not an immutable chip, please consider fixing it! gpio gpiochip1: (1e000600.gpio-bank1): not an immutable chip, please consider fixing it! gpio gpiochip2: (1e000600.gpio-bank2): not an immutable chip, please consider fixing it! Fix this by making the irqchip in the mt7621 driver immutable. Tested-by: Arınç ÜNAL <[email protected]> Signed-off-by: Sergio Paracuellos <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2022-09-14Merge tag 'devicetree-fixes-for-6.0-2' of ↵Linus Torvalds34-43/+44
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Update some stale binding maintainer emails - Fix property name error in apple,aic binding - Add missing param to of_dma_configure_id() stub - Fix an off-by-one error in unflatten_dt_nodes() * tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: pinctrl: qcom: drop non-working codeaurora.org emails dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails dt-bindings: apple,aic: Fix required item "apple,fiq-index" in affinity description dt-bindings: interconnect: fsl,imx8m-noc: drop Leonard Crestez of/device: Fix up of_dma_configure_id() stub MAINTAINERS: Update email of Neil Armstrong of: fdt: fix off-by-one error in unflatten_dt_nodes()
2022-09-14ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptopCallum Osmotherly1-0/+1
The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the previous Precision 5560. I replicated that patch onto this one, and can confirm that the audio is much better (the woofers are now working); I've tested it on my Dell Precision 5570. Signed-off-by: Callum Osmotherly <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha Signed-off-by: Takashi Iwai <[email protected]>
2022-09-14cifs: update internal module numberSteve French1-2/+2
To 2.39 Signed-off-by: Steve French <[email protected]>
2022-09-14cifs: add missing spinlock around tcon refcountPaulo Alcantara1-0/+3
Add missing spinlock to protect updates on tcon refcount in cifs_put_tcon(). Fixes: d7d7a66aacd6 ("cifs: avoid use of global locks for high contention data") Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-09-14drm/rockchip: Fix return type of cdn_dp_connector_mode_validNathan Huckleberry1-2/+3
The mode_valid field in drm_connector_helper_funcs is expected to be of type: enum drm_mode_status (* mode_valid) (struct drm_connector *connector, struct drm_display_mode *mode); The mismatched return type breaks forward edge kCFI since the underlying function definition does not match the function hook definition. The return type of cdn_dp_connector_mode_valid should be changed from int to enum drm_mode_status. Reported-by: Dan Carpenter <[email protected]> Link: https://github.com/ClangBuiltLinux/linux/issues/1703 Cc: [email protected] Signed-off-by: Nathan Huckleberry <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-13cifs: always initialize struct msghdr smb_msg completelyStefan Metzmacher2-13/+4
So far we were just lucky because the uninitialized members of struct msghdr are not used by default on a SOCK_STREAM tcp socket. But as new things like msg_ubuf and sg_from_iter where added recently, we should play on the safe side and avoid potention problems in future. Signed-off-by: Stefan Metzmacher <[email protected]> Cc: [email protected] Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-09-13cifs: don't send down the destination address to sendmsg for a SOCK_STREAMStefan Metzmacher1-2/+2
This is ignored anyway by the tcp layer. Signed-off-by: Stefan Metzmacher <[email protected]> Cc: [email protected] Reviewed-by: Ronnie Sahlberg <[email protected]> Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-09-13block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowaitStefan Roesch1-2/+2
Today blk_queue_enter() and __bio_queue_enter() return -EBUSY for the nowait code path. This is not correct: they should return -EAGAIN instead. This problem was detected by fio. The following command exposed the above problem: t/io_uring -p0 -d128 -b4096 -s32 -c32 -F1 -B0 -R0 -X1 -n24 -P1 -u1 -O0 /dev/ng0n1 By applying the patch, the retry case is handled correctly in the slow path. Signed-off-by: Stefan Roesch <[email protected]> Fixes: bfd343aa1718 ("blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set") Signed-off-by: Jens Axboe <[email protected]>
2022-09-13drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usageNathan Chancellor1-2/+1
This function consumes a lot of stack space and it blows up the size of dml30_ModeSupportAndSystemConfigurationFull() with clang: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Commit a0f7e7f759cf ("drm/amd/display: fix i386 frame size warning") aimed to address this for i386 but it did not help x86_64. To reduce the amount of stack space that dml30_ModeSupportAndSystemConfigurationFull() uses, mark UseMinimumDCFCLK() as noinline, using the _for_stack variant for documentation. While this will increase the total amount of stack usage between the two functions (1632 and 1304 bytes respectively), it will make sure both stay below the limit of 2048 bytes for these files. The aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage so it should not be reverted in favor of this change. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()Nathan Chancellor1-125/+47
Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with LLVM 16 (1976 -> 1864), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml31's ↵Nathan Chancellor1-196/+52
CalculateWatermarksAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with LLVM 16 (2216 -> 1976), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()Nathan Chancellor3-133/+78
Several of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with LLVM 16 (1936 -> 1728), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculatePrefetchSchedule(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Reduce number of arguments of ↵Nathan Chancellor3-259/+140
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer created at the top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the total amount of stack space that dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with LLVM 16 (2152 -> 1936), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Additionally, while modifying the arguments to dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v' consistently, instead of 'v' mixed with 'mode_lib->vba'. Link: https://github.com/ClangBuiltLinux/linux/issues/1681 Reported-by: "Sudip Mukherjee (Codethink)" <[email protected]> Tested-by: Maíra Canal <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Refactor SubVP calculation to remove FPUAlvin Lee1-45/+44
Refactor calculation to remove floating point operations from dmub_srv. To ensure that 32-bit compilation works well, we use the div64 family of macros to do integer division for SubVP-related timing parameters. Cc: Maíra Canal <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Isabella Basso <[email protected]> Cc: Magali Lemes <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Samson Tam <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Co-developed-by: Aurabindo Pillai <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Co-developed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Limit user regamma to a valid valueYao Wang11-0/+4
[Why] For HDR mode, we get total 512 tf_point and after switching to SDR mode we actually get 400 tf_point and the rest of points(401~512) still use dirty value from HDR mode. We should limit the rest of the points to max value. [How] Limit the value when coordinates_x.x > 1, just like what we do in translate_from_linear_space for other re-gamma build paths. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Yao Wang1 <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: add workaround for subvp cursor corruption for DCN32/321Aurabindo Pillai2-2/+4
[Why&How] Kernel does not have a means to tell the userspace to use software cursor. Due to lack of this functionality, reducing the max cursor size is the only way to ensure that power savings of Subview port feature is utilized for asics that support it. The workaround could be removed after cursor caching is fixed while a subviewport config is active. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: SW cursor fallback for SubVPAlvin Lee4-0/+8
[Description] Leverage SW cursor fall back for SubVP when the cursor is too big. We want to take advantage of being able to fallback to SW cursor when possible because it's not worth it to disable MCLK switching because the cursor is slightly too big. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Aurabindo Pillai <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Round cursor width up for MALL allocationTaimur Hassan2-2/+46
[Why & How] When calculating cursor size for MALL allocation, the cursor width should be the actual width rounded up to 64 alignment. Additionally, the bit depth should vary depending on color format. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Taimur Hassan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Correct dram channel width for dcn314Duncan Ma3-0/+6
[Why] The interpretation of the number of memory channels differ by memory type, and this affects channel width for the DML input. [How] Set dram channel width according to memory type for dcn314. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Duncan Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314Nicholas Kazlauskas1-3/+1
[Why] HW can support the display swizzle modes for video, and those are preferable over standard or linear for decode use. [How] Remove the check for DCN314. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Hook up DCN314 specific dml implementationNicholas Kazlauskas3-1/+14
[Why & How] Add support for the DML314 functions and hook up DCN314 to use them. This has some necessary additions for calculating Max VSTARTUP for future features, but there's also some changes that we have to make for pixel format/swizzle support. That will come in a following patch to make this transition easier to bisect. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Enable dlg and vba compilation for dcn314Rodrigo Siqueira1-0/+3
We were not using the VBA and DLG files for DCN314, but the next sequence of changes for DCN314 will require those files. This commit adds the necessary files to the Makefile. Cc: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fix compilation errors on DCN314Rodrigo Siqueira1-4/+5
We have some compilation errors in some DML files from DCN314 that we never noticed because we were not compiling some of the DML files. This commit fixes those syntax errors before we enable the compilation. Cc: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fix divide by zero in DMLAric Cyr2-18/+16
[why] Incorrectly using MicroTileWidth instead of MacroTileWidth for calculations. [how] Remove all unused references to MicroTile and change them to MacroTile. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Fixing DIG FIFO ErrorLeo Chen1-2/+1
[Why & How] DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software. Removed all instances of resetting the register to 0 Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Leo Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Update MBLK calculation for SubVPAlvin Lee2-8/+54
[Description] Update MBLK calculation according to hardware doc. For DCC case we were not allocation enough MALL due to an inaccurate MBLK calculation. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Alvin Lee <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/display: Revert "Fallback to SW cursor if SubVP + cursor too big"Aurabindo Pillai1-5/+0
This reverts commit a4f1b04216023ff0f4cd89328b59ee6890248130 since returning false in case of SubVP results in no cursor being visible on desktop as there is no sw cursor fallback path on all platforms. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Skip reset error status for psp v13_0_0Candice Li1-1/+2
No need to reset error status since only umc ras supported on psp v13_0_0. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: add HDP remap functionality to nbio 7.7Alex Deucher1-0/+9
Was missing before and would have resulted in a write to a non-existant register. Normally APUs don't use HDP, but other asics could use this code and APUs do use the HDP when used in passthrough. Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: change the alignment size of TMR BO to 1MYang Wang2-1/+2
align TMR BO size TO tmr size is not necessary, modify the size to 1M to avoid re-create BO fail when serious VRAM fragmentation. v2: add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size Signed-off-by: Yang Wang <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Enable full reset when RAS is supported on gc v11_0_0Candice Li1-0/+1
Enable full reset for RAS supported configuration on gc v11_0_0. v2: simplify the code. Signed-off-by: Candice Li <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: use dirty framebuffer helperHamza Mahfooz1-0/+2
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs struct. Signed-off-by: Hamza Mahfooz <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amdgpu: Don't enable LTR if not supportedLijo Lazar3-3/+24
As per PCIE Base Spec r4.0 Section 6.18 'Software must not enable LTR in an Endpoint unless the Root Complex and all intermediate Switches indicate support for LTR.' This fixes the Unsupported Request error reported through AER during ASPM enablement. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Reported-by: Gustaw Smolarczyk <[email protected]> Signed-off-by: Lijo Lazar <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2022-09-13drm/amd/pm: disable BACO entry/exit completely on several sienna cichlid cardsGuchun Chen1-0/+11
To avoid hardware intermittent failures. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-09-13Revert "fs/exec: allow to unshare a time namespace on vfork+exec"Andrei Vagin3-13/+2
This reverts commit 133e2d3e81de5d9706cab2dd1d52d231c27382e5. Alexey pointed out a few undesirable side effects of the reverted change. First, it doesn't take into account that CLONE_VFORK can be used with CLONE_THREAD. Second, a child process doesn't enter a target time name-space, if its parent dies before the child calls exec. It happens because the parent clears vfork_done. Eric W. Biederman suggests installing a time namespace as a task gets a new mm. It includes all new processes cloned without CLONE_VM and all tasks that call exec(). This is an user API change, but we think there aren't users that depend on the old behavior. It is too late to make such changes in this release, so let's roll back this patch and introduce the right one in the next release. Cc: Alexey Izbyshev <[email protected]> Cc: Christian Brauner <[email protected]> Cc: Dmitry Safonov <[email protected]> Cc: "Eric W. Biederman" <[email protected]> Cc: Florian Weimer <[email protected]> Cc: Kees Cook <[email protected]> Signed-off-by: Andrei Vagin <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13Revert "selftests/timens: add a test for vfork+exit"Andrei Vagin2-91/+1
The next patch reverts the code that this test verified. This reverts commit 6342140db6609a0c7d34f68c52b2947468e0e630. Signed-off-by: Andrei Vagin <[email protected]> Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-09-13dt-bindings: pinctrl: qcom: drop non-working codeaurora.org emailsKrzysztof Kozlowski2-2/+1
Emails to codeaurora.org bounce ("Recipient address rejected: undeliverable address: No such user here."). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2022-09-13dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emailsKrzysztof Kozlowski1-1/+1
Emails to codeaurora.org bounce ("Recipient address rejected: undeliverable address: No such user here."). Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2022-09-13gpio: ixp4xx: Make irqchip immutableLinus Walleij1-3/+14
This turns the IXP4xx GPIO irqchip into an immutable irqchip, a bit different from the standard template due to being hierarchical. Tested on the IXP4xx which uses drivers/ata/pata_ixp4xx_cf.c for a rootfs on compact flash with IRQs from this GPIO block to the CF ATA controller. Cc: Marc Zyngier <[email protected]> Signed-off-by: Linus Walleij <[email protected]> Acked-by: Marc Zyngier <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2022-09-13MAINTAINERS: Update HiSilicon GPIO Driver maintainerJay Fang1-1/+1
Add Jay Fang as the maintainer of the HiSilicon GPIO Driver, replacing Luo Jiaxing. Cc: Luo Jiaxing <[email protected]> Signed-off-by: Jay Fang <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Acked-by: Jiaxing Luo <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2022-09-13io_uring/rw: fix error'ed retry return valuesPavel Begunkov1-1/+1
Kernel test robot reports that we test negativity of an unsigned in io_fixup_rw_res() after a recent change, which masks error codes and messes up the return value in case I/O is re-retried and failed with an error. Fixes: 4d9cb92ca41dd ("io_uring/rw: fix short rw error handling") Reported-by: kernel test robot <[email protected]> Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/9754a0970af1861e7865f9014f735c70dc60bf79.1663071587.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-13Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-4/+8
Pull iov_iter fix from Al Viro: "Fix for a nfsd regression caused by the iov_iter stuff this window" * tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: nfsd_splice_actor(): handle compound pages
2022-09-13dt-bindings: apple,aic: Fix required item "apple,fiq-index" in affinity ↵Janne Grunau1-1/+1
description The required list used "fiq-index" instead of "apple,fiq-index" described as property and used in the dts. Add the missing "apple," prefix. Fixes: dba07ad11384 ("dt-bindings: apple,aic: Add affinity description for per-cpu pseudo-interrupts") Signed-off-by: Janne Grunau <[email protected]> Acked-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Herring <[email protected]>
2022-09-13btrfs: zoned: wait for extent buffer IOs before finishing a zoneNaohiro Aota1-2/+38
Before sending REQ_OP_ZONE_FINISH to a zone, we need to ensure that ongoing IOs already finished. Or, we will see a "Zone Is Full" error for the IOs, as the ZONE_FINISH command makes the zone full. We ensure that with btrfs_wait_block_group_reservations() and btrfs_wait_ordered_roots() for a data block group. And, for a metadata block group, the comparison of alloc_offset vs meta_write_pointer mostly ensures IOs for the allocated region already sent. However, there still can be a little time frame where the IOs are sent but not yet completed. Introduce wait_eb_writebacks() to ensure such IOs are completed for a metadata block group. It walks the buffer_radix to find extent buffers in the block group and calls wait_on_extent_buffer_writeback() on them. Fixes: afba2bc036b0 ("btrfs: zoned: implement active zone tracking") CC: [email protected] # 5.19+ Signed-off-by: Naohiro Aota <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-09-13btrfs: fix hang during unmount when stopping a space reclaim workerFilipe Manana1-0/+25
Often when running generic/562 from fstests we can hang during unmount, resulting in a trace like this: Sep 07 11:52:00 debian9 unknown: run fstests generic/562 at 2022-09-07 11:52:00 Sep 07 11:55:32 debian9 kernel: INFO: task umount:49438 blocked for more than 120 seconds. Sep 07 11:55:32 debian9 kernel: Not tainted 6.0.0-rc2-btrfs-next-122 #1 Sep 07 11:55:32 debian9 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Sep 07 11:55:32 debian9 kernel: task:umount state:D stack: 0 pid:49438 ppid: 25683 flags:0x00004000 Sep 07 11:55:32 debian9 kernel: Call Trace: Sep 07 11:55:32 debian9 kernel: <TASK> Sep 07 11:55:32 debian9 kernel: __schedule+0x3c8/0xec0 Sep 07 11:55:32 debian9 kernel: ? rcu_read_lock_sched_held+0x12/0x70 Sep 07 11:55:32 debian9 kernel: schedule+0x5d/0xf0 Sep 07 11:55:32 debian9 kernel: schedule_timeout+0xf1/0x130 Sep 07 11:55:32 debian9 kernel: ? lock_release+0x224/0x4a0 Sep 07 11:55:32 debian9 kernel: ? lock_acquired+0x1a0/0x420 Sep 07 11:55:32 debian9 kernel: ? trace_hardirqs_on+0x2c/0xd0 Sep 07 11:55:32 debian9 kernel: __wait_for_common+0xac/0x200 Sep 07 11:55:32 debian9 kernel: ? usleep_range_state+0xb0/0xb0 Sep 07 11:55:32 debian9 kernel: __flush_work+0x26d/0x530 Sep 07 11:55:32 debian9 kernel: ? flush_workqueue_prep_pwqs+0x140/0x140 Sep 07 11:55:32 debian9 kernel: ? trace_clock_local+0xc/0x30 Sep 07 11:55:32 debian9 kernel: __cancel_work_timer+0x11f/0x1b0 Sep 07 11:55:32 debian9 kernel: ? close_ctree+0x12b/0x5b3 [btrfs] Sep 07 11:55:32 debian9 kernel: ? __trace_bputs+0x10b/0x170 Sep 07 11:55:32 debian9 kernel: close_ctree+0x152/0x5b3 [btrfs] Sep 07 11:55:32 debian9 kernel: ? evict_inodes+0x166/0x1c0 Sep 07 11:55:32 debian9 kernel: generic_shutdown_super+0x71/0x120 Sep 07 11:55:32 debian9 kernel: kill_anon_super+0x14/0x30 Sep 07 11:55:32 debian9 kernel: btrfs_kill_super+0x12/0x20 [btrfs] Sep 07 11:55:32 debian9 kernel: deactivate_locked_super+0x2e/0xa0 Sep 07 11:55:32 debian9 kernel: cleanup_mnt+0x100/0x160 Sep 07 11:55:32 debian9 kernel: task_work_run+0x59/0xa0 Sep 07 11:55:32 debian9 kernel: exit_to_user_mode_prepare+0x1a6/0x1b0 Sep 07 11:55:32 debian9 kernel: syscall_exit_to_user_mode+0x16/0x40 Sep 07 11:55:32 debian9 kernel: do_syscall_64+0x48/0x90 Sep 07 11:55:32 debian9 kernel: entry_SYSCALL_64_after_hwframe+0x63/0xcd Sep 07 11:55:32 debian9 kernel: RIP: 0033:0x7fcde59a57a7 Sep 07 11:55:32 debian9 kernel: RSP: 002b:00007ffe914217c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 Sep 07 11:55:32 debian9 kernel: RAX: 0000000000000000 RBX: 00007fcde5ae8264 RCX: 00007fcde59a57a7 Sep 07 11:55:32 debian9 kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055b57556cdd0 Sep 07 11:55:32 debian9 kernel: RBP: 000055b57556cba0 R08: 0000000000000000 R09: 00007ffe91420570 Sep 07 11:55:32 debian9 kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 Sep 07 11:55:32 debian9 kernel: R13: 000055b57556cdd0 R14: 000055b57556ccb8 R15: 0000000000000000 Sep 07 11:55:32 debian9 kernel: </TASK> What happens is the following: 1) The cleaner kthread tries to start a transaction to delete an unused block group, but the metadata reservation can not be satisfied right away, so a reservation ticket is created and it starts the async metadata reclaim task (fs_info->async_reclaim_work); 2) Writeback for all the filler inodes with an i_size of 2K starts (generic/562 creates a lot of 2K files with the goal of filling metadata space). We try to create an inline extent for them, but we fail when trying to insert the inline extent with -ENOSPC (at cow_file_range_inline()) - since this is not critical, we fallback to non-inline mode (back to cow_file_range()), reserve extents, create extent maps and create the ordered extents; 3) An unmount starts, enters close_ctree(); 4) The async reclaim task is flushing stuff, entering the flush states one by one, until it reaches RUN_DELAYED_IPUTS. There it runs all current delayed iputs. After running the delayed iputs and before calling btrfs_wait_on_delayed_iputs(), one or more ordered extents complete, and btrfs_add_delayed_iput() is called for each one through btrfs_finish_ordered_io() -> btrfs_put_ordered_extent(). This results in bumping fs_info->nr_delayed_iputs from 0 to some positive value. So the async reclaim task blocks at btrfs_wait_on_delayed_iputs() waiting for fs_info->nr_delayed_iputs to become 0; 5) The current transaction is committed by the transaction kthread, we then start unpinning extents and end up calling btrfs_try_granting_tickets() through unpin_extent_range(), since we released some space. This results in satisfying the ticket created by the cleaner kthread at step 1, waking up the cleaner kthread; 6) At close_ctree() we ask the cleaner kthread to park; 7) The cleaner kthread starts the transaction, deletes the unused block group, and then calls kthread_should_park(), which returns true, so it parks. And at this point we have the delayed iputs added by the completion of the ordered extents still pending; 8) Then later at close_ctree(), when we call: cancel_work_sync(&fs_info->async_reclaim_work); We hang forever, since the cleaner was parked and no one else can run delayed iputs after that, while the reclaim task is waiting for the remaining delayed iputs to be completed. Fix this by waiting for all ordered extents to complete and running the delayed iputs before attempting to stop the async reclaim tasks. Note that we can not wait for ordered extents with btrfs_wait_ordered_roots() (or other similar functions) because that waits for the BTRFS_ORDERED_COMPLETE flag to be set on an ordered extent, but the delayed iput is added after that, when doing the final btrfs_put_ordered_extent(). So instead wait for the work queues used for executing ordered extent completion to be empty, which works because we do the final put on an ordered extent at btrfs_finish_ordered_io() (while we are in the unmount context). Fixes: d6fd0ae25c6495 ("Btrfs: fix missing delayed iputs on unmount") CC: [email protected] # 5.15+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-09-13btrfs: fix hang during unmount when stopping block group reclaim workerFilipe Manana1-6/+11
During early unmount, at close_ctree(), we try to stop the block group reclaim task with cancel_work_sync(), but that may hang if the block group reclaim task is currently at btrfs_relocate_block_group() waiting for the flag BTRFS_FS_UNFINISHED_DROPS to be cleared from fs_info->flags. During unmount we only clear that flag later, after trying to stop the block group reclaim task. Fix that by clearing BTRFS_FS_UNFINISHED_DROPS before trying to stop the block group reclaim task and after setting BTRFS_FS_CLOSING_START, so that if the reclaim task is waiting on that bit, it will stop immediately after being woken, because it sees the filesystem is closing (with a call to btrfs_fs_closing()), and then returns immediately with -EINTR. Fixes: 31e70e527806c5 ("btrfs: fix hang during unmount when block group reclaim task is running") CC: [email protected] # 5.15+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-09-13tools/include/uapi: Fix <asm/errno.h> for parisc and xtensaBen Hutchings1-2/+2
tools/include/uapi/asm/errno.h currently attempts to include non-existent arch-specific errno.h header for xtensa. Remove this case so that <asm-generic/errno.h> is used instead, and add the missing arch-specific header for parisc. References: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=ia64&ver=5.8.3-1%7Eexp1&stamp=1598340829&raw=1 Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Salvatore Bonaccorso <[email protected]> Cc: <[email protected]> # 5.10+ Signed-off-by: Helge Deller <[email protected]>
2022-09-13Input: hp_sdc: fix spelling typo in commentJiangshan Yi1-1/+1
Fix spelling typo in comment. Reported-by: k2ci <[email protected]> Signed-off-by: Jiangshan Yi <[email protected]> Signed-off-by: Helge Deller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.