aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-19netdevsim: Fix hwstats debugfs file permissionsIdo Schimmel1-3/+3
The hwstats debugfs files are only writeable, but they are created with read and write permissions, causing certain selftests to fail [1]. Fix by creating the files with write permission only. [1] # ./test_offload.py Test destruction of generic XDP... Traceback (most recent call last): File "/home/idosch/code/linux/tools/testing/selftests/bpf/./test_offload.py", line 810, in <module> simdev = NetdevSimDev() [...] Exception: Command failed: cat /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex cat: /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex: Invalid argument Fixes: 1a6d7ae7d63c ("netdevsim: Introduce support for L3 offload xstats") Reported-by: Jie2x Zhou <[email protected]> Tested-by: Jie2x Zhou <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Petr Machata <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-19i40e: Fix set max_tx_rate when it is lower than 1 MbpsMichal Jaron1-6/+26
While converting max_tx_rate from bytes to Mbps, this value was set to 0, if the original value was lower than 125000 bytes (1 Mbps). This would cause no transmission rate limiting to occur. This happened due to lack of check of max_tx_rate against the 1 Mbps value for max_tx_rate and the following division by 125000. Fix this issue by adding a helper i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of 50 Mbps, if its value is less than 1 Mbps, otherwise do the required conversion by dividing by 125000. Fixes: 5ecae4120a6b ("i40e: Refactor VF BW rate limiting") Signed-off-by: Michal Jaron <[email protected]> Signed-off-by: Andrii Staikov <[email protected]> Tested-by: Bharathi Sreenivas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-19i40e: Fix VF set max MTU sizeMichal Jaron1-0/+20
Max MTU sent to VF is set to 0 during memory allocation. It cause that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not depend on data from HW. Set max_mtu field in virtchnl_vf_resource struct to inform VF in GET_VF_RESOURCES msg what size should be max frame. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-19iavf: Fix set max MTU size with port VLAN and jumbo framesMichal Jaron1-2/+5
After setting port VLAN and MTU to 9000 on VF with ice driver there was an iavf error "PF returned error -5 (IAVF_ERR_PARAM) to our request 6". During queue configuration, VF's max packet size was set to IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN due to making some space for port VLAN as VF is not aware whether it's in a port VLAN. This mismatch in sizes caused ice to reject queue configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF to VF with GET_VF_RESOURCES msg but VF does not look at this. In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu received from pf with GET_VF_RESOURCES msg to make vf's max_frame_size dependent from pf. Add check if received max_mtu is not in eligible range then set it to IAVF_MAX_RXBUFFER. Fixes: dab86afdbbd1 ("i40e/i40evf: Change the way we limit the maximum frame size for Rx") Signed-off-by: Michal Jaron <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-19mlxbf_gige: clear MDIO gateway lock after readDavid Thompson1-0/+6
The MDIO gateway (GW) lock in BlueField-2 GIGE logic is set after read. This patch adds logic to make sure the lock is always cleared at the end of each MDIO transaction. Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <[email protected]> Signed-off-by: David Thompson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-19iavf: Fix bad page stateNorbert Zulinski1-2/+2
Fix bad page state, free inappropriate page in handling dummy descriptor. iavf_build_skb now has to check not only if rx_buffer is NULL but also if size is zero, same thing in iavf_clean_rx_irq. Without this patch driver would free page that will be used by napi_build_skb. Fixes: a9f49e006030 ("iavf: Fix handling of dummy receive descriptors") Signed-off-by: Norbert Zulinski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-09-19um: Prevent KASAN splats in dump_stack()Vincent Whitchurch1-1/+2
Use READ_ONCE_NOCHECK() when reading the stack to prevent KASAN splats when dump_stack() is used. Fixes: 5b301409e8bc5d7fad ("UML: add support for KASAN under x86_64") Signed-off-by: Vincent Whitchurch <[email protected]> Reviewed-by: Dmitry Vyukov <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2022-09-19um: fix default console kernel parameterChristian Lamparter1-1/+1
OpenWrt's UML with 5.15 was producing odd errors/warnings during preinit part of the early userspace portion: |[ 0.000000] Kernel command line: ubd0=root.img root=98:0 console=tty |[...] |[ 0.440000] random: jshn: uninitialized urandom read (4 bytes read) |[ 0.460000] random: jshn: uninitialized urandom read (4 bytes read) |/etc/preinit: line 47: can't create /dev/tty: No such device or address |/etc/preinit: line 48: can't create /dev/tty: No such device or address |/etc/preinit: line 58: can't open /dev/tty: No such device or address |[...] repeated many times That "/dev/tty" came from the command line (which is automatically added if no console= parameter was specified for the uml binary). The TLDP project tells the following about the /dev/tty: <https://tldp.org/HOWTO/Text-Terminal-HOWTO-7.html#ss7.3> | /dev/tty stands for the controlling terminal (if any) for the current | process.[...] | /dev/tty is something like a link to the actually terminal device[..] The "(if any)" is important here, since it's possible for processes to not have a controlling terminal. I think this was a simple typo and the author wanted tty0 there. CC: Thomas Meyer <[email protected]> Fixes: d7ffac33631b ("um: stdio_console: Make preferred console") Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: Richard Weinberger <[email protected]>
2022-09-19um: Cleanup compiler warning in arch/x86/um/tls_32.cLukas Straub1-6/+0
arch.tls_array is statically allocated so checking for NULL doesn't make sense. This causes the compiler warning below. Remove the checks to silence these warnings. ../arch/x86/um/tls_32.c: In function 'get_free_idx': ../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress] 68 | if (!t->arch.tls_array) | ^ In file included from ../arch/x86/um/asm/processor.h:10, from ../include/linux/rcupdate.h:30, from ../include/linux/rculist.h:11, from ../include/linux/pid.h:5, from ../include/linux/sched.h:14, from ../arch/x86/um/tls_32.c:7: ../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here 22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; | ^~~~~~~~~ ../arch/x86/um/tls_32.c: In function 'get_tls_entry': ../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress] 243 | if (!t->arch.tls_array) | ^ ../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here 22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES]; | ^~~~~~~~~ Signed-off-by: Lukas Straub <[email protected]> Acked-by: Randy Dunlap <[email protected]> # build-tested Signed-off-by: Richard Weinberger <[email protected]>
2022-09-19um: Cleanup syscall_handler_t cast in syscalls_32.hLukas Straub1-3/+2
Like in f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9 "um: Cleanup syscall_handler_t definition/cast, fix warning", remove the cast to to fix the compiler warning. Signed-off-by: Lukas Straub <[email protected]> Acked-by: Randy Dunlap <[email protected]> # build-tested Signed-off-by: Richard Weinberger <[email protected]>
2022-09-19MIPS: Loongson32: Fix PHY-mode being left unspecifiedSerge Semin1-8/+8
commit 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") has changed the plat->interface field semantics from containing the PHY-mode to specifying the MAC-PCS interface mode. Due to that the loongson32 platform code will leave the phylink interface uninitialized with the PHY-mode intended by the means of the actual platform setup. The commit-author most likely has just missed the arch-specific code to fix. Let's mend the Loongson32 platform code then by assigning the PHY-mode to the phy_interface field of the STMMAC platform data. Fixes: 0060c8783330 ("net: stmmac: implement support for passive mode converters via dt") Signed-off-by: Serge Semin <[email protected]> Signed-off-by: Keguang Zhang <[email protected]> Tested-by: Keguang Zhang <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-09-19MIPS: lantiq: export clk_get_io() for lantiq_wdt.koRandy Dunlap1-0/+1
The lantiq WDT driver uses clk_get_io(), which is not exported, so export it to fix a build error: ERROR: modpost: "clk_get_io" [drivers/watchdog/lantiq_wdt.ko] undefined! Fixes: 287e3f3f4e68 ("MIPS: lantiq: implement support for clkdev api") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: kernel test robot <[email protected]> Cc: Thomas Bogendoerfer <[email protected]> Cc: John Crispin <[email protected]> Cc: [email protected] Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-09-19ALSA: core: Fix double-free at snd_card_new()Takashi Iwai1-5/+5
During the code change to add the support for devres-managed card instance, we put an explicit kfree(card) call at the error path in snd_card_new(). This is needed for the early error path before the card is initialized with the device, but is rather superfluous and causes a double-free at the error path after the card instance is initialized, as the destructor of the card object already contains a kfree() call. This patch fixes the double-free situation by removing the superfluous kfree(). Meanwhile we need to call kfree() explicitly for the early error path, so it's added there instead. Fixes: e8ad415b7a55 ("ALSA: core: Add managed card creation") Reported-by: Rondreis <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-19ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LEDDaniel Houldsworth1-0/+1
Similair to the HP OMEN 15, the HP OMEN 16 also needs ALC285_FIXUP_HP_MUTE_LED for the mute LED to work. [ Rearranged the entry in PCI SSID order by tiwai ] Signed-off-by: Daniel Houldsworth <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-18Linux 6.0-rc6Linus Torvalds1-1/+1
2022-09-18Merge tag 'parisc-for-6.0-3' of ↵Linus Torvalds5-14/+16
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "Some small parisc architecture fixes for 6.0-rc6: One patch lightens up a previous commit and thus unbreaks building the debian kernel, which tries to configure a 64-bit kernel with the ARCH=parisc environment variable set. The other patches fixes asm/errno.h includes in the tools directory and cleans up memory allocation in the iosapic driver. Summary: - Allow configuring 64-bit kernel with ARCH=parisc - Fix asm/errno.h includes in tools directory for parisc and xtensa - Clean up iosapic memory allocation - Minor typo and spelling fixes" * tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Allow CONFIG_64BIT with ARCH=parisc parisc: remove obsolete manual allocation aligning in iosapic tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa Input: hp_sdc: fix spelling typo in comment parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
2022-09-18Merge tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linuxLinus Torvalds2-9/+9
Pull io_uring fixes from Jens Axboe: "Nothing really major here, but figured it'd be nicer to just get these flushed out for -rc6 so that the 6.1 branch will have them as well. That'll make our lives easier going forward in terms of development, and avoid trivial conflicts in this area. - Simple trace rename so that the returned opcode name is consistent with the enum definition (Stefan) - Send zc rsrc request vs notification lifetime fix (Pavel)" * tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux: io_uring/opdef: rename SENDZC_NOTIF to SEND_ZC io_uring/net: fix zc fixed buf lifetime
2022-09-18io_uring/opdef: rename SENDZC_NOTIF to SEND_ZCStefan Metzmacher1-1/+1
It's confusing to see the string SENDZC_NOTIF in ftrace output when using IORING_OP_SEND_ZC. Fixes: b48c312be05e8 ("io_uring/net: simplify zerocopy send user API") Signed-off-by: Stefan Metzmacher <[email protected]> Cc: Pavel Begunkov <[email protected]> Cc: Jens Axboe <[email protected]> Cc: [email protected] Reviewed-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/8e5cd8616919c92b6c3c7b6ea419fdffd5b97f3c.1663363798.git.metze@samba.org Signed-off-by: Jens Axboe <[email protected]>
2022-09-18io_uring/net: fix zc fixed buf lifetimePavel Begunkov1-8/+8
Notifications usually outlive requests, so we need to pin buffers with it by assigning a rsrc to it instead of the request. Fixed: b48c312be05e8 ("io_uring/net: simplify zerocopy send user API") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/dd6406ff8a90887f2b36ed6205dac9fda17c1f35.1663366886.git.asml.silence@gmail.com Reviewed-by: Stefan Metzmacher <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-09-16Merge tag 'gpio-fixes-for-v6.0-rc6' of ↵Linus Torvalds4-10/+31
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - fix the level-low interrupt type support in gpio-mpc8xxx - convert another two drivers to using immutable irq chips - MAINTAINERS update * tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: mt7621: Make the irqchip immutable gpio: ixp4xx: Make irqchip immutable MAINTAINERS: Update HiSilicon GPIO Driver maintainer gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
2022-09-16tcp: Use WARN_ON_ONCE() in tcp_read_skb()Peilin Ye1-1/+1
Prevent tcp_read_skb() from flooding the syslog. Suggested-by: Jakub Sitnicki <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16ALSA: hda/hdmi: Fix the converter reuse for the silent streamJaroslav Kysela1-0/+1
When the user space pcm stream uses the silent stream converter, it is no longer allocated for the silent stream. Clear the appropriate flag in the hdmi_pcm_open() function. The silent stream setup may be applied in hdmi_pcm_close() (and the error path - open fcn) again. If the flag is not cleared, the reuse conditions for the silent stream converter in hdmi_choose_cvt() may improperly share this converter. Cc: Kai Vehmanen <[email protected]> Signed-off-by: Jaroslav Kysela <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-16Merge tag 'pinctrl-v6.0-2' of ↵Linus Torvalds4-22/+105
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Nothing special, just driver fixes: - Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm SC8180x - Fix the Rockchip driver to support interrupt on both rising and falling edges. - Name the Allwinner A100 R_PIO properly - Fix several issues with the Ocelot interrupts" * tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: ocelot: Fix interrupt controller pinctrl: sunxi: Fix name for A100 R_PIO pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH pinctrl: qcom: sc8180x: Fix wrong pin numbers pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
2022-09-16Merge tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds2-5/+10
Pull block fixes from Jens Axboe: "Two fixes for -rc6: - Fix a mixup of sectors and bytes in the secure erase ioctl (Mikulas) - Fix for a bad return value for a non-blocking bio/blk queue enter call (me)" * tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block: blk-lib: fix blkdev_issue_secure_erase block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
2022-09-16Merge tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-blockLinus Torvalds2-2/+3
Pull io_uring fixes from Jens Axboe: "Two small patches: - Fix using an unsigned type for the return value, introduced in this release (Pavel) - Stable fix for a missing check for a fixed file on put (me)" * tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block: io_uring/msg_ring: check file type before putting io_uring/rw: fix error'ed retry return values
2022-09-16Merge tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drmLinus Torvalds59-908/+655
Pull drm fixes from Dave Airlie: "This is the regular drm fixes pull. The i915 and misc fixes are fairly regular, but the amdgpu contains fixes for new hw blocks, the dcn314 specific path hookups and also has a bunch of fixes for clang stack size warnings which are a bit churny but fairly straightforward. This means it looks a little larger than usual. amdgpu: - BACO fixes for some RDNA2 boards - PCI AER fixes uncovered by a core PCI change - Properly hook up dirtyfb helper - RAS fixes for GC 11.x - TMR fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - LLVM DML stack size fixes i915: - Revert a display patch around max DP source rate now that the proper WaEdpLinkRateDataReload is in place - Fix perf limit reasons bit position - Fix unclaimmed mmio registers on suspend flow with GuC - A vma_move_to_active fix for a regression with video decoding - DP DSP fix gma500: - Locking and IRQ fixes meson: - OSD1 display fixes panel-edp: - Fix Innolux timings rockchip: - DP/HDMI fixes" * tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm: (42 commits) drm/amdgpu: make sure to init common IP before gmc drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega drm/rockchip: Fix return type of cdn_dp_connector_mode_valid drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule() drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport() drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule() drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport() drm/amd/display: Refactor SubVP calculation to remove FPU drm/amd/display: Limit user regamma to a valid value drm/amd/display: add workaround for subvp cursor corruption for DCN32/321 drm/amd/display: SW cursor fallback for SubVP drm/amd/display: Round cursor width up for MALL allocation drm/amd/display: Correct dram channel width for dcn314 drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314 drm/amd/display: Hook up DCN314 specific dml implementation drm/amd/display: Enable dlg and vba compilation for dcn314 drm/amd/display: Fix compilation errors on DCN314 drm/amd/display: Fix divide by zero in DML ...
2022-09-16Merge tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-15/+12
Pull cifs fixes from Steve French: "Four smb3 fixes for stable: - important fix to revalidate mapping when doing direct writes - missing spinlock - two fixes to socket handling - trivial change to update internal version number for cifs.ko" * tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module number cifs: add missing spinlock around tcon refcount cifs: always initialize struct msghdr smb_msg completely cifs: don't send down the destination address to sendmsg for a SOCK_STREAM cifs: revalidate mapping when doing direct writes
2022-09-16Merge branch 'net-unsync-addresses-from-ports'David S. Miller14-32/+297
From: Benjamin Poirier <[email protected]> To: [email protected] Cc: Jay Vosburgh <[email protected]>, Veaceslav Falico <[email protected]>, Andy Gospodarek <[email protected]>, "David S. Miller" <[email protected]>, Eric Dumazet <[email protected]>, Jakub Kicinski <[email protected]>, Paolo Abeni <[email protected]>, Jiri Pirko <[email protected]>, Shuah Khan <[email protected]>, Jonathan Toppins <[email protected]>, [email protected] Subject: [PATCH net v3 0/4] Unsync addresses from ports when stopping aggregated devices Date: Wed, 7 Sep 2022 16:56:38 +0900 [thread overview] Message-ID: <[email protected]> (raw) This series fixes similar problems in the bonding and team drivers. Because of missing dev_{uc,mc}_unsync() calls, addresses added to underlying devices may be leftover after the aggregated device is deleted. Add the missing calls and a few related tests. v2: * fix selftest installation, see patch 3 v3: * Split lacpdu_multicast changes to their own patch, #1 * In ndo_{add,del}_slave methods, only perform address list changes when the aggregated device is up (patches 2 & 3) * Add selftest function related to the above change (patch 4) ==================== Acked-by: Jay Vosburgh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16net: Add tests for bonding and team address list managementBenjamin Poirier9-1/+237
Test that the bonding and team drivers clean up an underlying device's address lists (dev->uc, dev->mc) when the aggregated device is deleted. Test addition and removal of the LACPDU multicast address on underlying devices by the bonding driver. v2: * add lag_lib.sh to TEST_FILES v3: * extend bond_listen_lacpdu_multicast test to init_state up and down cases * remove some superfluous shell syntax and 'set dev ... up' commands Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16net: team: Unsync device addresses on ndo_stopBenjamin Poirier1-6/+18
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former team ports after a team device has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls at their expected location, team_close(). v3: * When adding or deleting a port, only sync/unsync addresses if the team device is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16net: bonding: Unsync device addresses on ndo_stopBenjamin Poirier1-12/+35
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former bond slaves after a bond has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls, via bond_hw_addr_flush(), at their expected location, bond_close(). Add dev_mc_add() call to bond_open() to match the above change. v3: * When adding or deleting a slave, only sync/unsync, add/del addresses if the bond is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16net: bonding: Share lacpdu_mcast_addr definitionBenjamin Poirier4-16/+10
There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16Merge branch '100GbE' of ↵David S. Miller4-25/+33
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-08 (ice, iavf) This series contains updates to ice and iavf drivers. Dave removes extra unplug of auxiliary bus on reset which caused a scheduling while atomic to be reported for ice. Ding Hui defers setting of queues for TCs to ensure valid configuration and restores old config if invalid for ice. Sylwester fixes a check of setting MAC address to occur after result is received from PF for iavf driver. Brett changes check of ring tail to use software cached value as not all devices have access to register tail for iavf driver. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-09-16net: marvell: prestera: add support for for Aldrin2Oleksandr Mazur1-0/+1
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support. Signed-off-by: Oleksandr Mazur <[email protected]> V2: - retarget to net tree instead of net-next; - fix missed colon in patch subject ('net marvell' vs 'net: mavell'); Signed-off-by: David S. Miller <[email protected]>
2022-09-16net/ieee802154: fix uninit value bug in dgram_sendmsgHaimin Zhang2-19/+60
There is uninit value bug in dgram_sendmsg function in net/ieee802154/socket.c when the length of valid data pointed by the msg->msg_name isn't verified. We introducing a helper function ieee802154_sockaddr_check_size to check namelen. First we check there is addr_type in ieee802154_addr_sa. Then, we check namelen according to addr_type. Also fixed in raw_bind, dgram_bind, dgram_connect. Signed-off-by: Haimin Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-16Merge tag 'drm-intel-fixes-2022-09-15' of ↵Dave Airlie6-40/+22
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Revert a display patch around max DP source rate now that the proper WaEdpLinkRateDataReload is in place. (Ville) - Fix perf limit reasons bit position. (Ashutosh) - Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh) - A vma_move_to_active fix for a regression with video decoding. (Nirmoy) - DP DSP fix. (Ankit) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-16Merge tag 'drm-misc-fixes-2022-09-15' of ↵Dave Airlie14-34/+38
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Short summary of fixes pull: * gma500: Locking and IRQ fixes * meson: OSD1 display fixes * panel-edp: Fix Innolux timings * rockchip: DP/HDMI fixes Signed-off-by: Dave Airlie <[email protected]> From: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/YyMUpP1w21CPXq+I@linux-uq9g
2022-09-16Merge tag 'amd-drm-fixes-6.0-2022-09-14' of ↵Dave Airlie39-834/+595
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.0-2022-09-14: amdgpu: - BACO fixes for some RDNA2 boards - PCI AER fixes uncovered by a core PCI change - Properly hook up dirtyfb helper - RAS fixes for GC 11.x - TMR fix - DCN 3.2.x fixes - DCN 3.1.4 fixes - LLVM DML stack size fixes Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-09-15io_uring/msg_ring: check file type before puttingJens Axboe1-1/+2
If we're invoked with a fixed file, follow the normal rules of not calling io_fput_file(). Fixed files are permanently registered to the ring, and do not need putting separately. Cc: [email protected] Fixes: aa184e8671f0 ("io_uring: don't attempt to IOPOLL for MSG_RING requests") Signed-off-by: Jens Axboe <[email protected]>
2022-09-15ALSA: hda/realtek: Add quirk for ASUS GA503R laptopLuke D. Jones1-0/+1
The ASUS G15 2022 (GA503R) series laptop has the same node-to-DAC pairs as early models and the G14, this includes bass speakers which are by default mapped incorrectly to the 0x06 node. Add a quirk to use the same DAC pairs as the G14. Signed-off-by: Luke D. Jones <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jackLuke D. Jones1-0/+11
Fixes up the pincfg for ASUS ROG Strix G15 (G533Z) headphone combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15ALSA: hda/realtek: Add pincfg for ASUS G513 HP jackLuke D. Jones1-0/+11
Fixes up the pincfg for ASUS ROG Strix G513 headphone and mic combo jack [ Fixed the position in the quirk table by tiwai ] Signed-off-by: Luke D. Jones <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15ALSA: hda/realtek: Re-arrange quirk table entriesTakashi Iwai1-3/+3
A few entries have been mistakenly inserted in wrong positions without considering the SSID ordering. Place them at right positions. Fixes: b7557267c233 ("ALSA: hda/realtek: Add quirk for ASUS GA402") Fixes: 94db9cc8f8fa ("ALSA: hda/realtek: Add quirk for ASUS GU603") Fixes: 739d0959fbed ("ALSA: hda: Add quirk for ASUS Flow x13") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptopCallum Osmotherly1-0/+1
Just as with the 5570 (and the other Dell laptops), this enables the two subwoofer speakers on the Dell Precision 5530 together with the main ones, significantly increasing the audio quality. I've tested this myself on a 5530 and can confirm it's working as expected. Signed-off-by: Callum Osmotherly <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha Signed-off-by: Takashi Iwai <[email protected]>
2022-09-15blk-lib: fix blkdev_issue_secure_eraseMikulas Patocka1-3/+8
There's a bug in blkdev_issue_secure_erase. The statement "unsigned int len = min_t(sector_t, nr_sects, max_sectors);" sets the variable "len" to the length in sectors, but the statement "bio->bi_iter.bi_size = len" treats it as if it were in bytes. The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len << SECTOR_SHIFT" are thinko. This patch fixes it. Signed-off-by: Mikulas Patocka <[email protected]> Cc: [email protected] # v5.19 Fixes: 44abff2c0b97 ("block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD") Link: https://lore.kernel.org/r/alpine.LRH.2.02.2209141549480.28100@file01.intranet.prod.int.rdu2.redhat.com Signed-off-by: Jens Axboe <[email protected]>
2022-09-15parisc: Allow CONFIG_64BIT with ARCH=pariscHelge Deller1-1/+11
The previous patch triggered a build failure for the debian kernel, which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment variable and uses ARCH=parisc to configure the kernel for 64-bit support. This patch weakens the previous patch while keeping the recommended way to configure the kernel with: ARCH=parisc -> build 32-bit kernel ARCH=parisc64 -> build 64-bit kernel while adding the possibility for debian to configure a 64-bit kernel even if ARCH=parisc is set (PA8X00 CPU has to be selected and CONFIG_64BIT needs to be enabled). The downside of this patch is, that we now have a small window open again where people may get it wrong: if they enable CONFIG_64BIT and try to compile with a 32-bit compiler. Fixes: 3dcfb729b5f4 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only") Signed-off-by: Helge Deller <[email protected]> Cc: <[email protected]> # 5.15+
2022-09-15parisc: remove obsolete manual allocation aligning in iosapicRolf Eike Beer1-10/+1
kmalloc() returns memory with __assume_kmalloc_alignment, which is __alignof__(unsigned long long) for parisc. Signed-off-by: Rolf Eike Beer <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-09-14drm/amdgpu: make sure to init common IP before gmcAlex Deucher1-3/+11
Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-09-14drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vegaAlex Deucher2-22/+5
This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-09-14drm/amdgpu: move nbio ih_doorbell_range() into ih code for vegaAlex Deucher3-3/+8
This mirrors what we do for other asics and this way we are sure the ih doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. In this case IH is initialized before GFX, so there should be no issue. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
Powered by cgit, Gruvboxed by Blaster4385.