| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a done_before argument to iomap_dio_rw that indicates how much of
the request has already been transferred. When the request succeeds, we
report that done_before additional bytes were tranferred. This is
useful for finishing a request asynchronously when part of the request
has already been completed synchronously.
We'll use that to allow iomap_dio_rw to be used with page faults
disabled: when a page fault occurs while submitting a request, we
synchronously complete the part of the request that has already been
submitted. The caller can then take care of the page fault and call
iomap_dio_rw again for the rest of the request, passing in the number of
bytes already tranferred.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
In iomap_dio_rw, when iomap_apply returns an -EFAULT error and the
IOMAP_DIO_PARTIAL flag is set, complete the request synchronously and
return a partial result. This allows the caller to deal with the page
fault and retry the remainder of the request.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
|
|
When a user copy fails in one of the helpers of iomap_dio_rw, fail with
-EFAULT instead of returning 0. This matches what iomap_dio_bio_actor
returns when it gets an -EFAULT from bio_iov_iter_get_pages. With these
changes, iomap_dio_actor now consistently fails with -EFAULT when a user
page cannot be faulted in.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Darrick J. Wong <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
In the .read_iter and .write_iter file operations, we're accessing
user-space memory while holding the inode glock. There is a possibility
that the memory is mapped to the same file, in which case we'd recurse
on the same glock.
We could detect and work around this simple case of recursive locking,
but more complex scenarios exist that involve multiple glocks,
processes, and cluster nodes, and working around all of those cases
isn't practical or even possible.
Avoid these kinds of problems by disabling page faults while holding the
inode glock. If a page fault would occur, we either end up with a
partial read or write or with -EFAULT if nothing could be read or
written. In either case, we know that we're not done with the
operation, so we indicate that we're willing to give up the inode glock
and then we fault in the missing pages. If that made us lose the inode
glock, we return a partial read or write. Otherwise, we resume the
operation.
This locking problem was originally reported by Jan Kara. Linus came up
with the idea of disabling page faults. Many thanks to Al Viro and
Matthew Wilcox for their feedback.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Now that gfs2_file_buffered_write is the only remaining user of
ip->i_gh, we can move the glock holder to the stack (or rather, use the
one we already have on the stack); there is no need for keeping the
holder in the inode anymore.
This is slightly complicated by the fact that we're using ip->i_gh for
the statfs inode in gfs2_file_buffered_write as well. Writing to the
statfs inode isn't very common, so allocate the statfs holder
dynamically when needed.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
So far, for buffered writes, we were taking the inode glock in
gfs2_iomap_begin and dropping it in gfs2_iomap_end with the intention of
not holding the inode glock while iomap_write_actor faults in user
pages. It turns out that iomap_write_actor is called inside iomap_begin
... iomap_end, so the user pages were still faulted in while holding the
inode glock and the locking code in iomap_begin / iomap_end was
completely pointless.
Move the locking into gfs2_file_buffered_write instead. We'll take care
of the potential deadlocks due to faulting in user pages while holding a
glock in a subsequent patch.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
This patch introduces a new HIF_MAY_DEMOTE flag and infrastructure that
will allow glocks to be demoted automatically on locking conflicts.
When a locking request comes in that isn't compatible with the locking
state of an active holder and that holder has the HIF_MAY_DEMOTE flag
set, the holder will be demoted before the incoming locking request is
granted.
Note that this mechanism demotes active holders (with the HIF_HOLDER
flag set), while before we were only demoting glocks without any active
holders. This allows processes to keep hold of locks that may form a
cyclic locking dependency; the core glock logic will then break those
dependencies in case a conflicting locking request occurs. We'll use
this to avoid giving up the inode glock proactively before faulting in
pages.
Processes that allow a glock holder to be taken away indicate this by
calling gfs2_holder_allow_demote(), which sets the HIF_MAY_DEMOTE flag.
Later, they call gfs2_holder_disallow_demote() to clear the flag again,
and then they check if their holder is still queued: if it is, they are
still holding the glock; if it isn't, they can re-acquire the glock (or
abort).
Signed-off-by: Bob Peterson <[email protected]>
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Pass the first current glock holder into function may_grant and
deobfuscate the logic there.
While at it, switch from BUG_ON to GLOCK_BUG_ON in may_grant. To make
that build cleanly, de-constify the may_grant arguments.
We're now using function find_first_holder in do_promote, so move the
function's definition above do_promote.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Add a wrapper around iomap_file_buffered_write. We'll add code for when
the operation needs to be retried here later.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Introduce a new fault_in_iov_iter_writeable helper for safely faulting
in an iterator for writing. Uses get_user_pages() to fault in the pages
without actually writing to them, which would be destructive.
We'll use fault_in_iov_iter_writeable in gfs2 once we've determined that
the iterator passed to .read_iter isn't in memory.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Turn iov_iter_fault_in_readable into a function that returns the number
of bytes not faulted in, similar to copy_to_user, instead of returning a
non-zero value when any of the requested pages couldn't be faulted in.
This supports the existing users that require all pages to be faulted in
as well as new users that are happy if any pages can be faulted in.
Rename iov_iter_fault_in_readable to fault_in_iov_iter_readable to make
sure this change doesn't silently break things.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Turn fault_in_pages_{readable,writeable} into versions that return the
number of bytes not faulted in, similar to copy_to_user, instead of
returning a non-zero value when any of the requested pages couldn't be
faulted in. This supports the existing users that require all pages to
be faulted in as well as new users that are happy if any pages can be
faulted in.
Rename the functions to fault_in_{readable,writeable} to make sure
this change doesn't silently break things.
Neither of these functions is entirely trivial and it doesn't seem
useful to inline them, so move them to mm/gup.c.
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
When switching from __get_user to fault_in_pages_readable, commit
9f9eae5ce717 broke kvm_use_magic_page: like __get_user,
fault_in_pages_readable returns 0 on success.
Fixes: 9f9eae5ce717 ("powerpc/kvm: Prefer fault_in_pages_readable function")
Cc: [email protected] # v4.18+
Signed-off-by: Andreas Gruenbacher <[email protected]>
|
|
Both iov_iter_get_pages and iov_iter_get_pages_alloc return the number
of bytes of the iovec they could get the pages for. When they cannot
get any pages, they're supposed to return 0, but when the start of the
iovec isn't page aligned, the calculation goes wrong and they return a
negative value. Fix both functions.
In addition, change iov_iter_get_pages_alloc to return NULL in that case
to prevent resource leaks.
Signed-off-by: Andreas Gruenbacher <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A bit of a big batch, partly because I didn't send any last week, and
also just because the BPF fixes happened to land this week.
Summary:
- Fix a regression hit by the IPR SCSI driver, introduced by the
recent addition of MSI domains on pseries.
- A big series including 8 BPF fixes, some with potential security
impact and the rest various code generation issues.
- Fix our program check assembler entry path, which was accidentally
jumping into a gas macro and generating strange stack frames, which
could confuse find_bug().
- A couple of fixes, and related changes, to fix corner cases in our
machine check handling.
- Fix our DMA IOMMU ops, which were not always returning the optimal
DMA mask, leading to at least one device falling back to 32-bit DMA
when it shouldn't.
- A fix for KUAP handling on 32-bit Book3S.
- Fix crashes seen when kdumping on some pseries systems.
Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric
Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem,
Christoph Hellwig, Johan Almbladh, Stan Johnson"
* tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
powerpc/32s: Fix kuap_kernel_restore()
powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler
powerpc/64s: Fix unrecoverable MCE calling async handler from NMI
powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG
powerpc/64: warn if local irqs are enabled in NMI or hardirq context
powerpc/traps: do not enable irqs in _exception
powerpc/64s: fix program check interrupt emergency stack path
powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000
powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END
powerpc/bpf ppc32: Fix JMP32_JSET_K
powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation
powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
powerpc/security: Add a helper to query stf_barrier type
powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
powerpc/bpf: Fix BPF_MOD when imm == 1
powerpc/bpf: Validate branch ranges
powerpc/lib: Add helper to check if offset is within conditional branch range
powerpc/iommu: Report the correct most efficient DMA mask for PCI devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Remove an extra section.len member in favour of section.sh_size
- Align .altinstructions section creation with the kernel's by creating
them with entry size of 0
- Fix objtool to convert a reloc symbol to a section offset and not to
not warn about not knowing how
* tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Remove redundant 'len' field from struct section
objtool: Make .altinstructions section entry size consistent
objtool: Remove reloc symbol type checks in get_alt_entry()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A FPU fix to properly handle invalid MXCSR values: 32-bit masks them
out due to historical reasons and 64-bit kernels reject them
- A fix to clear X86_FEATURE_SMAP when support for is not
config-enabled
- Three fixes correcting misspelled Kconfig symbols used in code
- Two resctrl object cleanup fixes
- Yet another attempt at fixing the neverending saga of botched x86
timers, this time because some incredibly smart hardware decides to
turn off the HPET timer in a low power state - who cares if the OS is
relying on it...
- Check the full return value range of an SEV VMGEXIT call to determine
whether it returned an error
* tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Restore the masking out of reserved MXCSR bits
x86/Kconfig: Correct reference to MWINCHIP3D
x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n
x86/entry: Correct reference to intended CONFIG_64_BIT
x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu()
x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
x86/hpet: Use another crystalball to evaluate HPET usability
x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes and one leak fix for the core"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxcpld: Modify register setting for 400KHz frequency
i2c: mlxcpld: Fix criteria for frequency setting
i2c: mediatek: Add OFFSET_EXT_CONF setting back
i2c: acpi: fix resource leak in reconfiguration device addition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five fixes, all in drivers.
The big change is the UFS task management rework, with lpfc next and
the rest being fairly minor and obvious fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: iscsi: Fix iscsi_task use after free
scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling
scsi: elx: efct: Delete stray unlock statement
scsi: ufs: core: Fix task management completion
scsi: acornscsi: Remove scsi_cmd_to_tag() reference
|
|
Pull block fixes from Jens Axboe:
"Two small fixes for this release:
- Add missing QUEUE_FLAG_HCTX_ACTIVE in the debugfs handling
(Johannes)
- Fix double free / UAF issue in __alloc_disk_node (Tetsuo)"
* tag 'block-5.15-2021-10-09' of git://git.kernel.dk/linux-block:
block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output
block: genhd: fix double kfree() in __alloc_disk_node()
|
|
Pull ksmbd fixes from Steve French:
"Six fixes for the ksmbd kernel server, including two additional
overflow checks, a fix for oops, and some cleanup (e.g. remove dead
code for less secure dialects that has been removed)"
* tag '5.15-rc4-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix oops from fuse driver
ksmbd: fix version mismatch with out of tree
ksmbd: use buf_data_size instead of recalculation in smb3_decrypt_req()
ksmbd: remove the leftover of smb2.0 dialect support
ksmbd: check strictly data area in ksmbd_smb2_check_message()
ksmbd: add the check to vaildate if stream protocol length exceeds maximum value
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A pair of fixes (along with the necessory cleanup) to our VDSO, to
avoid a locking during OOM and to prevent the text from overflowing
into the data page
- A fix to checksyscalls to teach it about our rv32 UABI
- A fix to add clone3() to the rv32 UABI, which was pointed out by
checksyscalls
- A fix to properly flush the icache on the local CPU in addition to
the remote CPUs
* tag 'riscv-for-linus-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
checksyscalls: Unconditionally ignore fstat{,at}64
riscv: Flush current cpu icache before other cpus
RISC-V: Include clone3() on rv32
riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
riscv/vdso: Move vdso data page up front
riscv/vdso: Refactor asm/vdso.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix potential memory leak on a error path in eBPF
- Fix handling of zpci device on reserve
* tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: fix zpci_zdev_put() on reserve
bpf, s390: Fix potential memory leak about jit_data
|
|
Pull xtensa fixes from Max Filippov:
- fix build/boot issues caused by CONFIG_OF vs CONFIC_USE_OF usage
- fix reset handler for xtfpga boards
* tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: xtfpga: Try software restart before simulating CPU reset
xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
xtensa: call irqchip_init only when CONFIG_USE_OF is selected
xtensa: use CONFIG_USE_OF instead of CONFIG_OF
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- fix two minor issues in the Xen privcmd driver plus a cleanup patch
for that driver
- fix multiple issues related to running as PVH guest and some related
earlyprintk fixes for other Xen guest types
- fix an issue introduced in 5.15 the Xen balloon driver
* tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: fix cancelled balloon action
xen/x86: adjust data placement
x86/PVH: adjust function/data placement
xen/x86: hook up xen_banner() also for PVH
xen/x86: generalize preferred console model from PV to PVH Dom0
xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU
xen/x86: allow "earlyprintk=xen" to work for PV Dom0
xen/x86: make "earlyprintk=xen" work better for PVH Dom0
xen/x86: allow PVH Dom0 without XEN_PV=y
xen/x86: prevent PVH type from getting clobbered
xen/privcmd: drop "pages" parameter from xen_remap_pfn()
xen/privcmd: fix error handling in mmap-resource processing
xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fixes from Arnd Bergmann:
"There is one build fix for Arm platforms that ended up impacting most
architectures because of the way the drivers/firmware Kconfig file is
wired up:
The CONFIG_QCOM_SCM dependency have caused a number of randconfig
regressions over time, and some still remain in v5.15-rc4. The fix we
agreed on in the end is to make this symbol selected by any driver
using it, and then building it even for non-Arm platforms with
CONFIG_COMPILE_TEST.
To make this work on all architectures, the drivers/firmware/Kconfig
file needs to be included for all architectures to make the symbol
itself visible.
In a separate discussion, we found that a sound driver patch that is
pending for v5.16 needs the same change to include this Kconfig file,
so the easiest solution seems to have my Kconfig rework included in
v5.15.
Finally, the branch also includes a small unrelated build fix for
NOMMU architectures"
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/[email protected]/
* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
qcom_scm: hide Kconfig symbol
firmware: include drivers/firmware/Kconfig unconditionally
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a recent ACPI-related regression in the PCI subsystem that
introduced a NULL pointer dereference possible to trigger from
user space via sysfs on some systems"
* tag 'acpi-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI: ACPI: Check parent pointer in acpi_pci_find_companion()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.15-rc5 that resolve a number of
reported issues:
- gadget driver fixes
- xhci build warning fixes
- build configuration fix
- cdc-acm tty handling fixes
- cdc-wdm fix
- typec fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: cdc-acm: fix break reporting
USB: cdc-acm: fix racy tty buffer accesses
usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize
usb: cdc-wdm: Fix check for WWAN
usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle
usb: typec: tcpm: handle SRC_STARTUP state if cc changes
usb: typec: tcpci: don't handle vSafe0V event if it's not enabled
usb: typec: tipd: Remove dependency on "connector" child fwnode
Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
usb: dwc3: gadget: Revert "set gadgets parent to the right controller"
usb: xhci: tegra: mark PM functions as __maybe_unused
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"A couple of MMC host fixes:
- meson-gx: Fix read/write access for dram-access-quirk
- sdhci-of-at91: Fix calibration sequence"
* tag 'mmc-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
mmc: sdhci-of-at91: replace while loop with read_poll_timeout
mmc: sdhci-of-at91: wait for calibration done before proceed
|
|
Pull drm fixes from Dave Airlie:
"I've returned from my tropical island retreat, even managed to bring
one of my kids on a dive with some turtles. Thanks to Daniel for doing
last week's work.
Otherwise this is the weekly fixes pull, it's a bit bigger because the
vc4 reverts in your tree caused some problems with fixes in the
drm-misc tree so it got left out last week, so this week has the misc
fixes rebased without the vc4 pieces.
Otherwise it's i915, amdgpu with the usual fixes and a scattering over
other drivers.
I expect things should calm down a bit more next week.
core:
- Kconfig fix for fb_simple vs simpledrm.
i915:
- Fix RKL HDMI audio
- Fix runtime pm imbalance on i915_gem_shrink() error path
- Fix Type-C port access before hw/sw state sync
- Fix VBT backlight struct version/size check
- Fix VT-d async flip on SKL/BXT with plane stretch workaround
amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix
amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
vc4 (there were some hdmi fixes but things got reverted, sort it out
later):
- compiler fix
nouveau:
- Cursor fix
- Fix ttm buffer moves for ampere gpu's by adding minimal
acceleration support.
- memory leak fixes
rockchip:
- crtc/clk fixup
panel:
- ili9341 Fix DT bindings indent
- y030xx067a - yellow tint init seq fix
gbefb:
- Fix gbefb when built with COMPILE_TEST"
* tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits)
drm/amd/display: Fix detection of 4 lane for DPALT
drm/amd/display: Limit display scaling to up to 4k for DCN 3.1
drm/amd/display: Skip override for preferred link settings during link training
drm/nouveau/debugfs: fix file release memory leak
drm/nouveau/kms/nv50-: fix file release memory leak
drm/nouveau: avoid a use-after-free when BO init fails
DRM: delete DRM IRQ legacy midlayer docs
video: fbdev: gbefb: Only instantiate device when built for IP32
fbdev: simplefb: fix Kconfig dependencies
drm/panel: abt-y030xx067a: yellow tint fix
dt-bindings: panel: ili9341: correct indentation
drm/nouveau/fifo/ga102: initialise chid on return from channel creation
drm/rockchip: Update crtc fixup to account for fractional clk change
drm/nouveau/ga102-: support ttm buffer moves via copy engine
drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows
drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
drm/vc4: hdmi: Remove unused struct
drm/kmb: Enable alpha blended second plane
drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume
drm/amdgpu: init iommu after amdkfd device init
...
|
|
It made -Werror sad.
Signed-off-by: Adam Borowski <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Ser Olmy reported a boot failure:
init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \
in libc-2.33.so[b7bed000+156000]
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU: 0 PID: 1 Comm: init Tainted: G W 5.14.9 #1
Hardware name: Hewlett-Packard HP PC/HP Board, BIOS JD.00.06 12/06/2001
Call Trace:
dump_stack_lvl
dump_stack
panic
do_exit.cold
do_group_exit
get_signal
arch_do_signal_or_restart
? force_sig_info_to_task
? force_sig
exit_to_user_mode_prepare
syscall_exit_to_user_mode
do_int80_syscall_32
entry_INT80_32
on an old 32-bit Intel CPU:
vendor_id : GenuineIntel
cpu family : 6
model : 6
model name : Celeron (Mendocino)
stepping : 5
microcode : 0x3
Ser bisected the problem to the commit in Fixes.
tglx suggested reverting the rejection of invalid MXCSR values which
this commit introduced and replacing it with what the old code did -
simply masking them out to zero.
Further debugging confirmed his suggestion:
fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf
WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540
so restore the original behavior only for 32-bit kernels where you have
ancient machines with buggy hardware. For 32-bit programs on 64-bit
kernels, user space which supplies wrong MXCSR values is considered
malicious so fail the sigframe restoration there.
Fixes: 6f9866a166cd ("x86/fpu/signal: Let xrstor handle the features to init")
Reported-by: Ser Olmy <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Tested-by: Ser Olmy <[email protected]>
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.15-2021-10-06:
amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix
amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Rebased drm-misc-fixes for v5.15-rc5:
- Dropped vc4 patches.
- Compiler fix for vc4.
- Cursor fix for nouveau.
- Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support.
- Small rockchip fixes.
- Fix DT bindings indent for ili9341.
- Fix y030xx067a init sequence to not get a yellow tint.
- Kconfig fix for fb_simple vs simpledrm.
- Assorted nouvaeu memory leaks.
- Fix gbefb when built with COMPILE_TEST.
Signed-off-by: Dave Airlie <[email protected]>
From: Maarten Lankhorst <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.15-rc5:
- Fix RKL HDMI audio
- Fix runtime pm imbalance on i915_gem_shrink() error path
- Fix Type-C port access before hw/sw state sync
- Fix VBT backlight struct version/size check
- Fix VT-d async flip on SKL/BXT with plane stretch workaround
Signed-off-by: Dave Airlie <[email protected]>
From: Jani Nikula <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
These can be replaced by statx(). Since rv32 has a 64-bit time_t we
just never ended up with them in the first place. This is now an error
due to -Werror.
Suggested-by: Arnd Bergmann <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Bug fixes for NFSD error handling paths"
* tag 'nfsd-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Keep existing listeners on portlist error
SUNRPC: fix sign error causing rpcsec_gss drops
nfsd: Fix a warning for nfsd_file_close_inode
nfsd4: Handle the NFSv4 READDIR 'dircount' hint being zero
nfsd: fix error handling of register_pernet_subsys() in init_nfsd()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"This is a larger than normal update for Arm SoC specific code, most of
it in device trees, but also drivers and the omap and at91/sama7
platforms:
- There are four new entries to the MAINTAINERS file: Sven Peter and
Alyssa Rosenzweig for Apple M1, Romain Perier for Mstar/sigmastar,
and Vignesh Raghavendra for TI K3
- Build fixes to address randconfig warnings in sharpsl, dove, omap1,
and qcom platforms as well as the scmi and op-tee subsystems
- Regression fixes for missing CONFIG_FB and other options for
several defconfigs
- Several bug fixes for the newly added Microchip SAMA7 platform,
mostly regarding power management
- Missing SMP barriers to protect accesses to SCMI virtio device
- Regression fixes for TI OMAP, including a boot-time hang on am335x.
- Lots of bug fixes for NXP i.MX, mostly addressing incorrect
settings in devicetree files, and one revert for broken suspend.
- Fixes for ARM Juno/Vexpress devicetree files, addressing a couple
of schema warnings.
- Regression fixes for qualcomm SoC specific drivers and devicetree
files, reverting an mdt_loader change and at least pastially
reverting some of the 5.15 DTS changes, plus some minor bugfixes"
* tag 'armsoc-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (64 commits)
MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
firmware: arm_scmi: Add proper barriers to scmi virtio device
firmware: arm_scmi: Simplify spinlocks in virtio transport
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
ARM: sharpsl_param: work around -Wstringop-overread warning
ARM: defconfig: gemini: Restore framebuffer
ARM: dove: mark 'putc' as inline
ARM: omap1: move omap15xx local bus handling to usb.c
MAINTAINERS: Add Vignesh to TI K3 platform maintainership
arm64: dts: imx8m*-venice-gw7902: fix M2_RST# gpio
ARM: imx6: disable the GIC CPU interface before calling stby-poweroff sequence
arm64: dts: ls1028a: fix eSDHC2 node
arm64: dts: imx8mm-kontron-n801x-som: do not allow to switch off buck2
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
ARM: dts: at91: sama7g5ek: use proper slew-rate settings for GMACs
ARM: at91: pm: preload base address of controllers in tlb
ARM: at91: pm: group constants and addresses loading
ARM: dts: at91: sama7g5ek: add suspend voltage for ddr3l rail
...
|
|
arm/fixes
Apple SoC fixes for 5.15; just two MAINTAINERS updates.
- MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
- MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
* tag 'asahi-soc-fixes-5.15' of https://github.com/AsahiLinux/linux:
MAINTAINERS: Add Sven Peter as ARM/APPLE MACHINE maintainer
MAINTAINERS: Add Alyssa Rosenzweig as M1 reviewer
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
SCMI fixes for v5.15
A few fixes addressing:
- Kconfig dependency between VIRTIO and ARM_SCMI_PROTOCOL
- Link-time error with __exit annotation for virtio_scmi_exit
- Unnecessary nested irqsave/irqrestore spinlocks in virtio transport
- Missing SMP barriers to protect accesses to SCMI virtio device
* tag 'scmi-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Add proper barriers to scmi virtio device
firmware: arm_scmi: Simplify spinlocks in virtio transport
firmware: arm_scmi: Remove __exit annotation
firmware: arm_scmi: Fix virtio transport Kconfig dependency
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.15
Few regression fixes for omaps for the v5.15-rc cycle. There is a fix
for boot time hangs that can happen on some am335x devices that started
when the pruss devicetree nodes were added. The other fixes are less
critical:
- Fix compiler warning for sysc_init_soc() that got recently introduced
- Fix external abort for am335x pruss as otherwise some am335x will hang
- Use CLKDM_NOAUTO quirk also for dra7 dcan1
- Fix older NAND device node regression for omap3-sdp
* tag 'omap-for-v5.15/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3430-sdp: Fix NAND device node
bus: ti-sysc: Use CLKDM_NOAUTO for dra7 dcan1 for errata i893
soc: ti: omap-prm: Fix external abort for am335x pruss
bus: ti-sysc: Add break in switch statement in sysc_init_soc()
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfslib, cachefiles and afs fixes from David Howells:
- Fix another couple of oopses in cachefiles tracing stemming from the
possibility of passing in a NULL object pointer
- Fix netfs_clear_unread() to set READ on the iov_iter so that source
it is passed to doesn't do the wrong thing (some drivers look at the
flag on iov_iter rather than other available information to determine
the direction)
- Fix afs_launder_page() to write back at the correct file position on
the server so as not to corrupt data
* tag 'misc-fixes-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix afs_launder_page() to set correct start file position
netfs: Fix READ/WRITE confusion when calling iov_iter_xarray()
cachefiles: Fix oops with cachefiles_cull() due to NULL object
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix plugin static linking with libopencsd on ARM and ARM64
- Add missing -lstdc++ when linking with libopencsd
- Add missing topdown metrics events to 'perf test attr'
- Plug leak sys_event_tables list after processing JSON vendor events
entries
- Sync sound/asound.h copy with the kernel sources
* tag 'perf-tools-fixes-for-v5.15-2021-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tests attr: Add missing topdown metrics events
tools include UAPI: Sync sound/asound.h copy with the kernel sources
perf build: Fix plugin static linking with libopencsd on ARM and ARM64
perf build: Add missing -lstdc++ when linking with libopencsd
perf jevents: Free the sys_event_tables list after processing entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from xfrm, bpf, netfilter, and wireless.
Current release - regressions:
- xfrm: fix XFRM_MSG_MAPPING ABI breakage caused by inserting a new
value in the middle of an enum
- unix: fix an issue in unix_shutdown causing the other end
read/write failures
- phy: mdio: fix memory leak
Current release - new code bugs:
- mlx5e: improve MQPRIO resiliency against bad configs
Previous releases - regressions:
- bpf: fix integer overflow leading to OOB access in map element
pre-allocation
- stmmac: dwmac-rk: fix ethernet on rk3399 based devices
- netfilter: conntrack: fix boot failure with
nf_conntrack.enable_hooks=1
- brcmfmac: revert using ISO3166 country code and 0 rev as fallback
- i40e: fix freeing of uninitialized misc IRQ vector
- iavf: fix double unlock of crit_lock
Previous releases - always broken:
- bpf, arm: fix register clobbering in div/mod implementation
- netfilter: nf_tables: correct issues in netlink rule change event
notifications
- dsa: tag_dsa: fix mask for trunked packets
- usb: r8152: don't resubmit rx immediately to avoid soft lockup on
device unplug
- i40e: fix endless loop under rtnl if FW fails to correctly respond
to capability query
- mlx5e: fix rx checksum offload coexistence with ipsec offload
- mlx5: force round second at 1PPS out start time and allow it only
in supported clock modes
- phy: pcs: xpcs: fix incorrect CL37 AN sequence, EEE disable
sequence
Misc:
- xfrm: slightly rejig the new policy uAPI to make it less cryptic"
* tag 'net-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
net: prefer socket bound to interface when not in VRF
iavf: fix double unlock of crit_lock
i40e: Fix freeing of uninitialized misc IRQ vector
i40e: fix endless loop under rtnl
dt-bindings: net: dsa: marvell: fix compatible in example
ionic: move filter sync_needed bit set
gve: report 64bit tx_bytes counter from gve_handle_report_stats()
gve: fix gve_get_stats()
rtnetlink: fix if_nlmsg_stats_size() under estimation
gve: Properly handle errors in gve_assign_qpl
gve: Avoid freeing NULL pointer
gve: Correct available tx qpl check
unix: Fix an issue in unix_shutdown causing the other end read/write failures
net: stmmac: trigger PCS EEE to turn off on link down
net: pcs: xpcs: fix incorrect steps on disable EEE
netlink: annotate data races around nlk->bound
net: pcs: xpcs: fix incorrect CL37 AN sequence
net: sfp: Fix typo in state machine debug string
net/sched: sch_taprio: properly cancel timer from taprio_destroy()
net: bridge: fix under estimation in br_get_linkxstats_size()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Replace uuid.h with types.h in a header (Andy Shevchenko)
- Avoid sleeping in atomic context in PCI driver (Long Li)
- Avoid sending IPI to self when it shouldn't (Vitaly Kuznetsov)
* tag 'hyperv-fixes-signed-20211007' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Avoid erroneously sending IPI to 'self'
hyper-v: Replace uuid.h with types.h
PCI: hv: Fix sleep while in non-sleep context when removing child devices from the bus
|
|
If acpi_pci_find_companion() is called for a device whose parent
pointer is NULL, it will crash when attempting to get the ACPI
companion of the parent due to a NULL pointer dereference in
the ACPI_COMPANION() macro.
This was not a problem before commit 375553a93201 ("PCI: Setup ACPI
fwnode early and at the same time with OF") that made pci_setup_device()
call pci_set_acpi_fwnode() and so it allowed devices with NULL parent
pointers to be passed to acpi_pci_find_companion() which is the case
in pci_iov_add_virtfn(), for instance.
Fix this issue by making acpi_pci_find_companion() check the device's
parent pointer upfront and bail out if it is NULL.
While pci_iov_add_virtfn() can be changed to set the device's parent
pointer before calling pci_setup_device() for it, checking pointers
against NULL before dereferencing them is prudent anyway and looking
for ACPI companions of virtual functions isn't really useful.
Fixes: 375553a93201 ("PCI: Setup ACPI fwnode early and at the same time with OF")
Link: https://lore.kernel.org/linux-acpi/[email protected]/
Reported-by: Niklas Schnelle <[email protected]>
Tested-by: Niklas Schnelle <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Acked-by: Bjorn Helgaas <[email protected]>
|
|
Hector suggested I should add myself to help him maintain the
platform.
Acked-by: Hector Martin <[email protected]>
Signed-off-by: Sven Peter <[email protected]>
|
|
Add myself as a reviewer for Asahi Linux (Apple M1) patches.
I would like to be CC'ed on Asahi Linux patches for review and testing.
I am also collecting Asahi Linux patches downstream, rebasing on
linux-next periodically, and would like to be notified of what to
cherry-pick from lists.
Cc: Hector Martin <[email protected]>
Cc: Sven Peter <[email protected]>
Acked-by: Hector Martin <[email protected]>
Acked-by: Sven Peter <[email protected]>
Signed-off-by: Alyssa Rosenzweig <[email protected]>
|
|
Marios reported kernel oops from fuse driver when ksmbd call
mark_inode_dirty(). This patch directly update ->i_ctime after removing
mark_inode_ditry() and notify_change will put inode to dirty list.
Cc: Tom Talpey <[email protected]>
Cc: Ronnie Sahlberg <[email protected]>
Cc: Ralph Böhme <[email protected]>
Cc: Hyunchul Lee <[email protected]>
Reported-by: Marios Makassikis <[email protected]>
Tested-by: Marios Makassikis <[email protected]>
Acked-by: Hyunchul Lee <[email protected]>
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|