aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18scsi: device_handler: alua: Remove a might_sleep() annotationBart Van Assche1-2/+3
The might_sleep() annotation in alua_rtpg_queue() is not correct since the command completion code may call this function from atomic context. Calling alua_rtpg_queue() from atomic context in the command completion path is fine since request submitters must hold an sdev reference until command execution has completed. This patch fixes the following kernel complaint: BUG: sleeping function called from invalid context at drivers/scsi/device_handler/scsi_dh_alua.c:992 Call Trace: dump_stack_lvl+0xac/0x100 __might_resched+0x284/0x2c8 alua_rtpg_queue+0x3c/0x98 [scsi_dh_alua] alua_check+0x122/0x250 [scsi_dh_alua] alua_check_sense+0x172/0x228 [scsi_dh_alua] scsi_check_sense+0x8a/0x2e0 scsi_decide_disposition+0x286/0x298 scsi_complete+0x6a/0x108 blk_complete_reqs+0x6e/0x88 __do_softirq+0x13e/0x6b8 __irq_exit_rcu+0x14a/0x170 irq_exit_rcu+0x22/0x50 do_ext_irq+0x10a/0x1d0 Link: https://lore.kernel.org/r/[email protected] Reported-by: Steffen Maier <[email protected]> Reviewed-by: Martin Wilck <[email protected]> Tested-by: Steffen Maier <[email protected]> Signed-off-by: Bart Van Assche <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-01-18scsi: iscsi_tcp: Fix UAF during login when accessing the shost ipaddressMike Christie1-3/+6
If during iscsi_sw_tcp_session_create() iscsi_tcp_r2tpool_alloc() fails, userspace could be accessing the host's ipaddress attr. If we then free the session via iscsi_session_teardown() while userspace is still accessing the session we will hit a use after free bug. Set the tcp_sw_host->session after we have completed session creation and can no longer fail. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mike Christie <[email protected]> Reviewed-by: Lee Duncan <[email protected]> Acked-by: Ding Hui <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-01-18scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddressMike Christie3-9/+42
Bug report and analysis from Ding Hui. During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this: [ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_sendmsg+0xe0/0x170 [ 276.974583] __sys_sendmsg+0xc8/0x170 [ 276.974891] do_syscall_64+0x38/0x90 [ 276.975216] entry_SYSCALL_64_after_hwframe+0x63/0xcd We can easily reproduce by two tasks: 1. while :; do iscsiadm -m node --login; iscsiadm -m node --logout; done 2. while :; do cat \ /sys/devices/platform/host*/iscsi_host/host*/ipaddress; done iscsid | cat --------------------------------+--------------------------------------- |- iscsi_sw_tcp_session_destroy | |- iscsi_session_teardown | |- device_release | |- iscsi_session_release ||- dev_attr_show |- kfree | |- show_host_param_ | ISCSI_HOST_PARAM_IPADDRESS | |- iscsi_sw_tcp_host_get_param | |- r/w tcp_sw_host->session (UAF) |- iscsi_host_remove | |- iscsi_host_free | Fix the above bug by splitting the session removal into 2 parts: 1. removal from iSCSI class which includes sysfs and removal from host tracking. 2. freeing of session. During iscsi_tcp host and session removal we can remove the session from sysfs then remove the host from sysfs. At this point we know userspace is not accessing the kernel via sysfs so we can free the session and host. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mike Christie <[email protected]> Reviewed-by: Lee Duncan <[email protected]> Acked-by: Ding Hui <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-01-18scsi: ufs: core: Fix devfreq deadlocksJohan Hovold2-14/+17
There is a lock inversion and rwsem read-lock recursion in the devfreq target callback which can lead to deadlocks. Specifically, ufshcd_devfreq_scale() already holds a clk_scaling_lock read lock when toggling the write booster, which involves taking the dev_cmd mutex before taking another clk_scaling_lock read lock. This can lead to a deadlock if another thread: 1) tries to acquire the dev_cmd and clk_scaling locks in the correct order, or 2) takes a clk_scaling write lock before the attempt to take the clk_scaling read lock a second time. Fix this by dropping the clk_scaling_lock before toggling the write booster as was done before commit 0e9d4ca43ba8 ("scsi: ufs: Protect some contexts from unexpected clock scaling"). While the devfreq callbacks are already serialised, add a second serialising mutex to handle the unlikely case where a callback triggered through the devfreq sysfs interface is racing with a request to disable clock scaling through the UFS controller 'clkscale_enable' sysfs attribute. This could otherwise lead to the write booster being left disabled after having disabled clock scaling. Also take the new mutex in ufshcd_clk_scaling_allow() to make sure that any pending write booster update has completed on return. Note that this currently only affects Qualcomm platforms since commit 87bd05016a64 ("scsi: ufs: core: Allow host driver to disable wb toggling during clock scaling"). The lock inversion (i.e. 1 above) was reported by lockdep as: ====================================================== WARNING: possible circular locking dependency detected 6.1.0-next-20221216 #211 Not tainted ------------------------------------------------------ kworker/u16:2/71 is trying to acquire lock: ffff076280ba98a0 (&hba->dev_cmd.lock){+.+.}-{3:3}, at: ufshcd_query_flag+0x50/0x1c0 but task is already holding lock: ffff076280ba9cf0 (&hba->clk_scaling_lock){++++}-{3:3}, at: ufshcd_devfreq_scale+0x2b8/0x380 which lock already depends on the new lock. [ +0.011606] the existing dependency chain (in reverse order) is: -> #1 (&hba->clk_scaling_lock){++++}-{3:3}: lock_acquire+0x68/0x90 down_read+0x58/0x80 ufshcd_exec_dev_cmd+0x70/0x2c0 ufshcd_verify_dev_init+0x68/0x170 ufshcd_probe_hba+0x398/0x1180 ufshcd_async_scan+0x30/0x320 async_run_entry_fn+0x34/0x150 process_one_work+0x288/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x120 ret_from_fork+0x10/0x20 -> #0 (&hba->dev_cmd.lock){+.+.}-{3:3}: __lock_acquire+0x12a0/0x2240 lock_acquire.part.0+0xcc/0x220 lock_acquire+0x68/0x90 __mutex_lock+0x98/0x430 mutex_lock_nested+0x2c/0x40 ufshcd_query_flag+0x50/0x1c0 ufshcd_query_flag_retry+0x64/0x100 ufshcd_wb_toggle+0x5c/0x120 ufshcd_devfreq_scale+0x2c4/0x380 ufshcd_devfreq_target+0xf4/0x230 devfreq_set_target+0x84/0x2f0 devfreq_update_target+0xc4/0xf0 devfreq_monitor+0x38/0x1f0 process_one_work+0x288/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x120 ret_from_fork+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&hba->clk_scaling_lock); lock(&hba->dev_cmd.lock); lock(&hba->clk_scaling_lock); lock(&hba->dev_cmd.lock); *** DEADLOCK *** Fixes: 0e9d4ca43ba8 ("scsi: ufs: Protect some contexts from unexpected clock scaling") Cc: [email protected] # 5.12 Cc: Can Guo <[email protected]> Tested-by: Andrew Halaney <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2023-01-18scsi: hpsa: Fix allocation size for scsi_host_alloc()Alexey V. Vissarionov1-1/+1
The 'h' is a pointer to struct ctlr_info, so it's just 4 or 8 bytes, while the structure itself is much bigger. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: edd163687ea5 ("hpsa: add driver for HP Smart Array controllers.") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexey V. Vissarionov <[email protected]> Acked-by: Don Brace <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2023-01-18Merge tag 'for-linus-2023011801' of ↵Linus Torvalds11-14/+96
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - fixes for potential empty list handling in HID core (Pietro Borrello) - fix for NULL pointer dereference in betop driver that could be triggered by malicious device (Pietro Borrello) - fixes for handling calibration data preventing division by zero in Playstation driver (Roderick Colenbrander) - fix for memory leak on error path in amd-sfh driver (Basavaraj Natikar) - other few assorted small fixes and device ID-specific handling * tag 'for-linus-2023011801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: betop: check shape of output reports HID: playstation: sanity check DualSense calibration data. HID: playstation: sanity check DualShock4 calibration data. HID: uclogic: Add support for XP-PEN Deco 01 V2 HID: revert CHERRY_MOUSE_000C quirk HID: check empty report_list in bigben_probe() HID: check empty report_list in hid_validate_values() HID: amd_sfh: Fix warning unwind goto HID: intel_ish-hid: Add check for ishtp_dma_tx_map
2023-01-18cifs: remove unused functionPaulo Alcantara2-63/+0
Remove dfs_cache_update_tgthint() as it is not used anywhere. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-01-18cifs: do not include page data when checking signatureEnzo Matsumiya1-6/+9
On async reads, page data is allocated before sending. When the response is received but it has no data to fill (e.g. STATUS_END_OF_FILE), __calc_signature() will still include the pages in its computation, leading to an invalid signature check. This patch fixes this by not setting the async read smb_rqst page data (zeroed by default) if its got_bytes is 0. This can be reproduced/verified with xfstests generic/465. Cc: <[email protected]> Signed-off-by: Enzo Matsumiya <[email protected]> Reviewed-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-01-18ACPI: PRM: Check whether EFI runtime is availableArd Biesheuvel1-0/+10
The ACPI PRM address space handler calls efi_call_virt_pointer() to execute PRM firmware code, but doing so is only permitted when the EFI runtime environment is available. Otherwise, such calls are guaranteed to result in a crash, and must therefore be avoided. Given that the EFI runtime services may become unavailable after a crash occurring in the firmware, we need to check this each time the PRM address space handler is invoked. If the EFI runtime services were not available at registration time to being with, don't install the address space handler at all. Fixes: cefc7ca46235 ("ACPI: PRM: implement OperationRegion handler for the PlatformRtMechanism subtype") Signed-off-by: Ard Biesheuvel <[email protected]> Cc: All applicable <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-01-18drm/i915: Remove unused variableNirmoy Das1-2/+0
Removed unused i915 var. Fixes: a273e95721e9 ("drm/i915: Allow switching away via vga-switcheroo if uninitialized") Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Signed-off-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Rodrigo Vivi <[email protected]>
2023-01-18Merge tag 'affs-for-6.2-tag' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull affs fix from David Sterba: "One minor fix for a KCSAN report" * tag 'affs-for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: affs: initialize fsdata in affs_truncate()
2023-01-18Merge tag 'erofs-for-6.2-rc5' of ↵Linus Torvalds4-16/+21
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "Two patches fixes issues reported by syzbot, one fixes a missing `domain_id` mount option in documentation and a minor cleanup: - Fix wrong iomap->length calculation post EOF, which could cause a WARN_ON in iomap_iter_done() (Siddh) - Fix improper kvcalloc() use with __GFP_NOFAIL (me) - Add missing `domain_id` mount option in documentation (Jingbo) - Clean up fscache option parsing (Jingbo)" * tag 'erofs-for-6.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: erofs: clean up parsing of fscache related options erofs: add documentation for 'domain_id' mount option erofs: fix kvcalloc() misuse with __GFP_NOFAIL erofs/zmap.c: Fix incorrect offset calculation
2023-01-18Merge tag 'loongarch-fixes-6.2-1' of ↵Linus Torvalds14-213/+247
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Fix a missing elf_hwcap, fix some stack unwinder bugs and two trivial cleanups" * tag 'loongarch-fixes-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Add generic ex-handler unwind in prologue unwinder LoongArch: Strip guess unwinder out from prologue unwinder LoongArch: Use correct sp value to get graph addr in stack unwinders LoongArch: Get frame info in unwind_start() when regs is not available LoongArch: Adjust PC value when unwind next frame in unwinder LoongArch: Simplify larch_insn_gen_xxx implementation LoongArch: Use common function sign_extend64() LoongArch: Add HWCAP_LOONGARCH_CPUCFG to elf_hwcap
2023-01-18phy: phy-can-transceiver: Skip warning if no "max-bitrate"Geert Uytterhoeven1-2/+3
According to the DT bindings, the "max-bitrate" property is optional. However, when it is not present, a warning is printed. Fix this by adding a missing check for -EINVAL. Fixes: a4a86d273ff1b6f7 ("phy: phy-can-transceiver: Add support for generic CAN transceiver driver") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/88e158f97dd52ebaa7126cd9631f34764b9c0795.1674037334.git.geert+renesas@glider.be Signed-off-by: Vinod Koul <[email protected]>
2023-01-18dt-bindings: phy: g12a-usb2-phy: fix compatible string documentationHeiner Kallweit1-4/+4
The compatible strings in the driver don't have the meson prefix. Fix this in the documentation and rename the file accordingly. Fixes: da86d286cce8 ("dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml") Cc: [email protected] Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Martin Blumenstingl <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-01-18dt-bindings: phy: g12a-usb3-pcie-phy: fix compatible string documentationHeiner Kallweit1-3/+3
The compatible string in the driver doesn't have the meson prefix. Fix this in the documentation and rename the file accordingly. Fixes: 87a55485f2fc ("dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml") Cc: [email protected] Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Martin Blumenstingl <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-01-18cifs: fix return of uninitialized rc in dfs_cache_update_tgthint()Paulo Alcantara1-3/+3
Fix this by initializing rc to 0 as cache_refresh_path() would not set it in case of success. Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-01-18drm/i915/dg2: Introduce Wa_18019271663Matt Atwood2-3/+7
Wa_18019271663 applies to all DG2 steppings and skus. Bspec: 66622 Signed-off-by: Matt Atwood <[email protected]> Reviewed-by: Gustavo Sousa <[email protected]> Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 900a80c5836587d95db32742f66e1f34f7b40fcb) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-01-18drm/i915/dg2: Introduce Wa_18018764978Matt Atwood2-1/+9
Wa_18018764978 applies to specific steppings of DG2 (G10 C0+, G11 and G12 A0+). Clean up style in function at the same time. Bspec: 66622 Signed-off-by: Matt Atwood <[email protected]> Reviewed-by: Gustavo Sousa <[email protected]> Signed-off-by: Matt Roper <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 468a4e630c7da8cf586f85cc498d6097aed1ab4b) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-01-18dmaengine: tegra: Fix memory leak in terminate_all()Akhil R1-0/+1
Terminate vdesc when terminating an ongoing transfer. This will ensure that the vdesc is present in the desc_terminated list The descriptor will be freed later in desc_free_list(). This fixes the memory leaks which can happen when terminating an ongoing transfer. Fixes: ee17028009d4 ("dmaengine: tegra: Add tegra gpcdma driver") Signed-off-by: Akhil R <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-01-18dmaengine: xilinx_dma: call of_node_put() when breaking out of ↵Liu Shixin1-1/+3
for_each_child_of_node() Since for_each_child_of_node() will increase the refcount of node, we need to call of_node_put() manually when breaking out of the iteration. Fixes: 9cd4360de609 ("dma: Add Xilinx AXI Video Direct Memory Access Engine driver support") Signed-off-by: Liu Shixin <[email protected]> Acked-by: Peter Korsgaard <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-01-18cifs: handle cache lookup errors different than -ENOENTPaulo Alcantara1-2/+9
lookup_cache_entry() might return an error different than -ENOENT (e.g. from ->char2uni), so handle those as well in cache_refresh_path(). Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-01-18cifs: remove duplicate code in __refresh_tcon()Paulo Alcantara1-38/+33
The logic for creating or updating a cache entry in __refresh_tcon() could be simply done with cache_refresh_path(), so use it instead. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-01-18cifs: don't take exclusive lock for updating target hintsPaulo Alcantara1-27/+20
Avoid contention while updating dfs target hints. This should be perfectly fine to update them under shared locks. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-01-18cifs: avoid re-lookups in dfs_cache_find()Paulo Alcantara1-24/+34
Simply downgrade the write lock on cache updates from cache_refresh_path() and avoid unnecessary re-lookup in dfs_cache_find(). Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-01-18cifs: fix potential deadlock in cache_refresh_path()Paulo Alcantara1-19/+23
Avoid getting DFS referral from an exclusive lock in cache_refresh_path() because the tcon IPC used for getting the referral could be disconnected and thus causing a deadlock as shown below: task A task B ====== ====== cifs_demultiplex_thread() dfs_cache_find() cifs_handle_standard() cache_refresh_path() reconnect_dfs_server() down_write() dfs_cache_noreq_find() get_dfs_referral() down_read() <- deadlock smb2_get_dfs_refer() SMB2_ioctl() cifs_send_recv() compound_send_recv() wait_for_response() where task A cannot wake up task B because it is blocked on down_read() due to the exclusive lock held in cache_refresh_path() and therefore not being able to make progress. Fixes: c9f711039905 ("cifs: keep referral server sessions alive") Reviewed-by: Aurélien Aptel <[email protected]> Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-01-18drm/fb-helper: Set framebuffer for vga-switcheroo clientsThomas Zimmermann1-0/+7
Set the framebuffer info for drivers that support VGA switcheroo. Only affects the amdgpu and nouveau drivers, which use VGA switcheroo and generic fbdev emulation. For other drivers, this does nothing. This fixes a potential regression in the console code. Both, amdgpu and nouveau, invoked vga_switcheroo_client_fb_set() from their internal fbdev code. But the call got lost when the drivers switched to the generic emulation. Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.") Fixes: 4a16dd9d18a0 ("drm/nouveau/kms: switch to drm fbdev helpers") Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Cc: Ben Skeggs <[email protected]> Cc: Karol Herbst <[email protected]> Cc: Lyude Paul <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: Laurent Pinchart <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Dave Airlie <[email protected]> Cc: Evan Quan <[email protected]> Cc: Christian König <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Hawking Zhang <[email protected]> Cc: Likun Gao <[email protected]> Cc: "Christian König" <[email protected]> Cc: Stanley Yang <[email protected]> Cc: "Tianci.Yin" <[email protected]> Cc: Xiaojian Du <[email protected]> Cc: Andrey Grodzovsky <[email protected]> Cc: YiPeng Chai <[email protected]> Cc: Somalapuram Amaranath <[email protected]> Cc: Bokun Zhang <[email protected]> Cc: Guchun Chen <[email protected]> Cc: Hamza Mahfooz <[email protected]> Cc: Aurabindo Pillai <[email protected]> Cc: Mario Limonciello <[email protected]> Cc: Solomon Chiu <[email protected]> Cc: Kai-Heng Feng <[email protected]> Cc: Felix Kuehling <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: "Marek Olšák" <[email protected]> Cc: Sam Ravnborg <[email protected]> Cc: Hans de Goede <[email protected]> Cc: "Ville Syrjälä" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: <[email protected]> # v5.17+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-01-18drm/i915: Allow switching away via vga-switcheroo if uninitializedThomas Zimmermann2-3/+6
Always allow switching away via vga-switcheroo if the display is uninitalized. Instead prevent switching to i915 if the device has not been initialized. This issue was introduced by commit 5df7bd130818 ("drm/i915: skip display initialization when there is no display") protected, which protects code paths from being executed on uninitialized devices. In the case of vga-switcheroo, we want to allow a switch away from i915's device. So run vga_switcheroo_process_delayed_switch() and test in the switcheroo callbacks if the i915 device is available. Fixes: 5df7bd130818 ("drm/i915: skip display initialization when there is no display") Signed-off-by: Thomas Zimmermann <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Cc: Radhakrishna Sripada <[email protected]> Cc: Lucas De Marchi <[email protected]> Cc: José Roberto de Souza <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Jani Nikula <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: Tvrtko Ursulin <[email protected]> Cc: "Ville Syrjälä" <[email protected]> Cc: Manasi Navare <[email protected]> Cc: Stanislav Lisovskiy <[email protected]> Cc: Imre Deak <[email protected]> Cc: "Jouni Högander" <[email protected]> Cc: Uma Shankar <[email protected]> Cc: Ankit Nautiyal <[email protected]> Cc: "Jason A. Donenfeld" <[email protected]> Cc: Matt Roper <[email protected]> Cc: Ramalingam C <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: Andi Shyti <[email protected]> Cc: Andrzej Hajda <[email protected]> Cc: "José Roberto de Souza" <[email protected]> Cc: Julia Lawall <[email protected]> Cc: [email protected] Cc: <[email protected]> # v5.14+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-01-18drm/i915/selftests: Unwind hugepages to drop wakeref on errorChris Wilson1-4/+4
Make sure that upon error after we have acquired the wakeref we do release it again. v2: add another missing "goto out_wf"(Andi). Fixes: 027c38b4121e ("drm/i915/selftests: Grab the runtime pm in shrink_thp") Cc: Andi Shyti <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Nirmoy Das <[email protected]> Reviewed-by: Andi Shyti <[email protected]> Reviewed-by: Nirmoy Das <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 14ec40a88210151296fff3e981c1a7196ad9bf55) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-01-18drm/i915: re-disable RC6p on Sandy BridgeSasa Dragic1-1/+2
RC6p on Sandy Bridge got re-enabled over time, causing visual glitches and GPU hangs. Disabled originally in commit 1c8ecf80fdee ("drm/i915: do not enable RC6p on Sandy Bridge"). Signed-off-by: Sasa Dragic <[email protected]> Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Fixes: fb6db0f5bf1d ("drm/i915: Remove unsafe i915.enable_rc6") Fixes: 13c5a577b342 ("drm/i915/gt: Select the deepest available parking mode for rc6") Cc: [email protected] Reviewed-by: Rodrigo Vivi <[email protected]> (cherry picked from commit 0c8a6e9ea232c221976a0670256bd861408d9917) Signed-off-by: Rodrigo Vivi <[email protected]>
2023-01-18HID: betop: check shape of output reportsPietro Borrello1-8/+9
betopff_init() only checks the total sum of the report counts for each report field to be at least 4, but hid_betopff_play() expects 4 report fields. A device advertising an output report with one field and 4 report counts would pass the check but crash the kernel with a NULL pointer dereference in hid_betopff_play(). Fixes: 52cd7785f3cd ("HID: betop: add drivers/hid/hid-betopff.c") Signed-off-by: Pietro Borrello <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2023-01-18l2tp: prevent lockdep issue in l2tp_tunnel_register()Eric Dumazet1-3/+2
lockdep complains with the following lock/unlock sequence: lock_sock(sk); write_lock_bh(&sk->sk_callback_lock); [1] release_sock(sk); [2] write_unlock_bh(&sk->sk_callback_lock); We need to swap [1] and [2] to fix this issue. Fixes: 0b2c59720e65 ("l2tp: close all race conditions in l2tp_tunnel_register()") Reported-by: [email protected] Signed-off-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/netdev/[email protected]/T/#m1164ff20628671b0f326a24cb106ab3239c70ce3 Cc: Cong Wang <[email protected]> Cc: Guillaume Nault <[email protected]> Reviewed-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-18gpiolib: acpi: Add a ignore wakeup quirk for Clevo NL5xRUMario Limonciello1-0/+13
commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") changed the policy such that I2C touchpads may be able to wake up the system by default if the system is configured as such. However on Clevo NL5xRU there is a mistake in the ACPI tables that the TP_ATTN# signal connected to GPIO 9 is configured as ActiveLow and level triggered but connected to a pull up. As soon as the system suspends the touchpad loses power and then the system wakes up. To avoid this problem, introduce a quirk for this model that will prevent the wakeup capability for being set for GPIO 9. Fixes: 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable") Reported-by: Werner Sembach <[email protected]> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1720627 Co-developed-by: Werner Sembach <[email protected]> Signed-off-by: Werner Sembach <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2023-01-18gpiolib: acpi: Allow ignoring wake capability on pins that aren't in _AEIMario Limonciello1-2/+2
Using the `ignore_wake` quirk or module parameter doesn't work for any pin that has been specified in the _CRS instead of _AEI. Extend the `acpi_gpio_irq_is_wake` check to cover both places. Suggested-by: Raul Rangel <[email protected]> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1722#note_1722335 Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2023-01-18virtio-net: correctly enable callback during start_xmitJason Wang1-2/+4
Commit a7766ef18b33("virtio_net: disable cb aggressively") enables virtqueue callback via the following statement: do { if (use_napi) virtqueue_disable_cb(sq->vq); free_old_xmit_skbs(sq, false); } while (use_napi && kick && unlikely(!virtqueue_enable_cb_delayed(sq->vq))); When NAPI is used and kick is false, the callback won't be enabled here. And when the virtqueue is about to be full, the tx will be disabled, but we still don't enable tx interrupt which will cause a TX hang. This could be observed when using pktgen with burst enabled. TO be consistent with the logic that tries to disable cb only for NAPI, fixing this by trying to enable delayed callback only when NAPI is enabled when the queue is about to be full. Fixes: a7766ef18b33 ("virtio_net: disable cb aggressively") Signed-off-by: Jason Wang <[email protected]> Tested-by: Laurent Vivier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-18net: macb: fix PTP TX timestamp failure due to packet paddingRobert Hancock1-8/+1
PTP TX timestamp handling was observed to be broken with this driver when using the raw Layer 2 PTP encapsulation. ptp4l was not receiving the expected TX timestamp after transmitting a packet, causing it to enter a failure state. The problem appears to be due to the way that the driver pads packets which are smaller than the Ethernet minimum of 60 bytes. If headroom space was available in the SKB, this caused the driver to move the data back to utilize it. However, this appears to cause other data references in the SKB to become inconsistent. In particular, this caused the ptp_one_step_sync function to later (in the TX completion path) falsely detect the packet as a one-step SYNC packet, even when it was not, which caused the TX timestamp to not be processed when it should be. Using the headroom for this purpose seems like an unnecessary complexity as this is not a hot path in the driver, and in most cases it appears that there is sufficient tailroom to not require using the headroom anyway. Remove this usage of headroom to prevent this inconsistency from occurring and causing other problems. Fixes: 653e92a9175e ("net: macb: add support for padding and fcs computation") Signed-off-by: Robert Hancock <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Claudiu Beznea <[email protected]> # on SAMA7G5 Reviewed-by: Claudiu Beznea <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-01-18perf test build-id: Fix test check for PE fileAthira Rajeev1-1/+14
Perf test "build id cache operations" fails for PE executable. Logs below from powerpc system. Same is observed on x86 as well. <<>> Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok build id: 5a0fd882b53084224ba47b624c55a469 link: /tmp/perf.debug.w0V/.build-id/5a/0fd882b53084224ba47b624c55a469 file: /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf failed: file /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist test child finished with -1 ---- end ---- build id cache operations: FAILED! <<>> The test tries to do: <<>> mkdir /tmp/perf.debug.TeY1 perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a ./tests/shell/../pe-file.exe <<>> The option "--buildid-dir" sets the build id cache directory as /tmp/perf.debug.TeY1. The option given to buildid-cahe, ie "-a ./tests/shell/../pe-file.exe", is to add the pe-file.exe to the cache. The testcase, sets buildid-dir and adds the file: pe-file.exe to build id cache. To check if the command is run successfully, "check" function looks for presence of the file in buildid cache directory. But the check here expects the added file to be executable. Snippet below: <<>> if [ ! -x $file ]; then echo "failed: file ${file} does not exist" exit 1 fi <<>> The buildid test is done for sha1 binary, md5 binary and also for PE file. The first two binaries are created at runtime by compiling with "--build-id" option and hence the check for sha1/md5 test should use [ ! -x ]. But in case of PE file, the permission for this input file is rw-r--r-- Hence the file added to build id cache has same permissoin Original file: ls tests/pe-file.exe | xargs stat --printf "%n %A \n" tests/pe-file.exe -rw-r--r-- buildid cache file: ls /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf | xargs stat --printf "%n %A \n" /tmp/perf.debug.w0V/.build-id/5a/../../root/<user>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf -rw-r--r-- Fix the test to match with the permission of original file in case of FE file. ie if the "tests/pe-file.exe" file is not having exec permission, just check for existence of the buildid file using [ ! -e <file> ] Signed-off-by: Athira Jajeev <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfDavid S. Miller1-0/+15
Pablo Niera Ayuso says: ==================== The following patchset contains Netfilter fixes for net: 1) Fix syn-retransmits until initiator gives up when connection is re-used due to rst marked as invalid, from Florian Westphal. ==================== Signed-off-by: David S. Miller <[email protected]>
2023-01-18perf buildid-cache: Fix the file mode with copyfile() while adding file to ↵Athira Rajeev1-3/+7
build-id cache The test "build id cache operations" fails on powerpc as below: Adding 5a0fd882b53084224ba47b624c55a469 ./tests/shell/../pe-file.exe: Ok build id: 5a0fd882b53084224ba47b624c55a469 link: /tmp/perf.debug.ZTu/.build-id/5a/0fd882b53084224ba47b624c55a469 file: /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf failed: file /tmp/perf.debug.ZTu/.build-id/5a/../../root/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf does not exist test child finished with -1 ---- end ---- build id cache operations: FAILED! The failing test is when trying to add pe-file.exe to build id cache. 'perf buildid-cache' can be used to add/remove/manage files from the build-id cache. "-a" option is used to add a file to the build-id cache. Simple command to do so for a PE exe file: # ls -ltr tests/pe-file.exe -rw-r--r--. 1 root root 75595 Jan 10 23:35 tests/pe-file.exe The file is in home directory. # mkdir /tmp/perf.debug.TeY1 # perf --buildid-dir /tmp/perf.debug.TeY1 buildid-cache -v -a tests/pe-file.exe The above will create ".build-id" folder in build id directory, which is /tmp/perf.debug.TeY1. Also adds file to this folder under build id. Example: # ls -ltr /tmp/perf.debug.TeY1/.build-id/5a/0fd882b53084224ba47b624c55a469/ total 76 -rw-r--r--. 1 root root 0 Jan 11 00:38 probes -rwxr-xr-x. 1 root root 75595 Jan 11 00:38 elf We can see in the results that file mode for original file and file in build id directory is different. ie, build id file has executable permission whereas original file doesn’t have. The code path and function (build_id_cache__add to add a file to the cache is in "util/build-id.c". In build_id_cache__add() function, it first attempts to link the original file to destination cache folder. If linking the file fails (which can happen if the destination and source is on a different mount points), it will copy the file to destination. Here copyfile() routine explicitly uses mode as "755" and hence file in the destination will have executable permission. Code snippet: if (link(realname, filename) && errno != EEXIST && copyfile(name, filename)) strace logs: 172285 link("/home/<user_name>/linux/tools/perf/tests/pe-file.exe", "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/elf") = -1 EXDEV (Invalid cross-device link) 172285 newfstatat(AT_FDCWD, "tests/pe-file.exe", {st_mode=S_IFREG|0644, st_size=75595, ...}, 0) = 0 172285 openat(AT_FDCWD, "/tmp/perf.debug.TeY1/home/<user_name>/linux/tools/perf/tests/pe-file.exe/5a0fd882b53084224ba47b624c55a469/.elf.KbAnsl", O_RDWR|O_CREAT|O_EXCL, 0600) = 3 172285 fchmod(3, 0755) = 0 172285 openat(AT_FDCWD, "tests/pe-file.exe", O_RDONLY) = 4 172285 mmap(NULL, 75595, PROT_READ, MAP_PRIVATE, 4, 0) = 0x7fffa5cd0000 172285 pwrite64(3, "MZ\220\0\3\0\0\0\4\0\0\0\377\377\0\0\270\0\0\0\0\0\0\0@\0\0\0\0\0\0\0"..., 75595, 0) = 75595 Whereas if the link succeeds, it succeeds in the first attempt itself and the file in the build-id dir will have same permission as original file. Example, above uses /tmp. Instead if we use "--buildid-dir /home/build", linking will work here since mount points are same. Hence the destination file will not have executable permission. Since the testcase "tests/shell/buildid.sh" always looks for executable file, test fails in powerpc environment when test is run from /root. The patch adds a change in build_id_cache__add() to use copyfile_mode() which also passes the file’s original mode as argument. This way the destination file mode also will be same as original file. Signed-off-by: Athira Jajeev <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-01-18perf expr: Prevent normalize() from reading into undefined memory in the ↵Sohom Datta1-1/+4
expression lexer The current implementation does not account for a trailing backslash followed by a null-byte. If a null-byte is encountered following a backslash, normalize() will continue reading (and potentially writing) into garbage memory ignoring the EOS null-byte. Signed-off-by: Sohom Datta <[email protected]> Acked-by: Ian Rogers <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-01-18tools headers: Syncronize linux/build_bug.h with the kernel sourcesArnaldo Carvalho de Melo1-0/+9
To pick up the changes in: 07a368b3f55a79d3 ("bug: introduce ASSERT_STRUCT_OFFSET") This cset only introduces a build time assert macro, that may be useful at some point for tooling, for now it silences this perf build warning: Warning: Kernel ABI header at 'tools/include/linux/build_bug.h' differs from latest version at 'include/linux/build_bug.h' diff -u tools/include/linux/build_bug.h include/linux/build_bug.h Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Maxim Levitsky <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Paolo Bonzini <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-01-18perf beauty: Update copy of linux/socket.h with the kernel sourcesArnaldo Carvalho de Melo1-1/+4
To pick the changes in: b5f0de6df6dce8d6 ("net: dev: Convert sa_data to flexible array in struct sockaddr") That don't result in any changes in the tables generated from that header. This silences this perf build warning: Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h' diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-01-18tools headers arm64: Sync arm64's cputype.h with the kernel sourcesArnaldo Carvalho de Melo1-1/+7
To get the changes in: decb17aeb8fa2148 ("KVM: arm64: vgic: Add Apple M2 cpus to the list of broken SEIS implementations") 07e39e60bbf0ccd5 ("arm64: Add Cortex-715 CPU part definition") 8ec8490a1950efec ("arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro") That addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/asm/cputype.h' differs from latest version at 'arch/arm64/include/asm/cputype.h' diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h Cc: Ali Saidi <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: D Scott Phillips <[email protected]> Cc: German Gomez <[email protected]> Cc: Leo Yan <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Will Deacon <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-01-18tools kvm headers arm64: Update KVM header from the kernel sourcesArnaldo Carvalho de Melo1-0/+1
To pick the changes from: 9cb1096f8590bc59 ("KVM: arm64: Enable ring-based dirty memory tracking") That doesn't result in any changes in tooling (built on a Libre Computer Firefly ROC-RK3399-PC-V1.1-A running Ubuntu 22.04), only addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h' diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h Cc: Adrian Hunter <[email protected]> Cc: Gavin Shan <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-01-18dmaengine: imx-sdma: Fix a possible memory leak in sdma_transfer_initHui Wang1-1/+3
If the function sdma_load_context() fails, the sdma_desc will be freed, but the allocated desc->bd is forgot to be freed. We already met the sdma_load_context() failure case and the log as below: [ 450.699064] imx-sdma 30bd0000.dma-controller: Timeout waiting for CH0 ready ... In this case, the desc->bd will not be freed without this change. Signed-off-by: Hui Wang <[email protected]> Reviewed-by: Sascha Hauer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-01-18dmaengine: Fix double increment of client_count in dma_chan_get()Koba Ko1-3/+4
The first time dma_chan_get() is called for a channel the channel client_count is incorrectly incremented twice for public channels, first in balance_ref_count(), and again prior to returning. This results in an incorrect client count which will lead to the channel resources not being freed when they should be. A simple test of repeated module load and unload of async_tx on a Dell Power Edge R7425 also shows this resulting in a kref underflow warning. [ 124.329662] async_tx: api initialized (async) [ 129.000627] async_tx: api initialized (async) [ 130.047839] ------------[ cut here ]------------ [ 130.052472] refcount_t: underflow; use-after-free. [ 130.057279] WARNING: CPU: 3 PID: 19364 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 130.065811] Modules linked in: async_tx(-) rfkill intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd ipmi_ssif kvm_amd dcdbas kvm mgag200 drm_shmem_helper acpi_ipmi irqbypass drm_kms_helper ipmi_si syscopyarea sysfillrect rapl pcspkr ipmi_devintf sysimgblt fb_sys_fops k10temp i2c_piix4 ipmi_msghandler acpi_power_meter acpi_cpufreq vfat fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul libahci crc32_pclmul crc32c_intel ghash_clmulni_intel igb megaraid_sas i40e libata i2c_algo_bit ccp sp5100_tco dca dm_mirror dm_region_hash dm_log dm_mod [last unloaded: async_tx] [ 130.117361] CPU: 3 PID: 19364 Comm: modprobe Kdump: loaded Not tainted 5.14.0-185.el9.x86_64 #1 [ 130.126091] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.18.0 01/17/2022 [ 130.133806] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 130.139041] Code: 01 01 e8 6d bd 55 00 0f 0b e9 72 9d 8a 00 80 3d 26 18 9c 01 00 75 85 48 c7 c7 f8 a3 03 9d c6 05 16 18 9c 01 01 e8 4a bd 55 00 <0f> 0b e9 4f 9d 8a 00 80 3d 01 18 9c 01 00 0f 85 5e ff ff ff 48 c7 [ 130.157807] RSP: 0018:ffffbf98898afe68 EFLAGS: 00010286 [ 130.163036] RAX: 0000000000000000 RBX: ffff9da06028e598 RCX: 0000000000000000 [ 130.170172] RDX: ffff9daf9de26480 RSI: ffff9daf9de198a0 RDI: ffff9daf9de198a0 [ 130.177316] RBP: ffff9da7cddf3970 R08: 0000000000000000 R09: 00000000ffff7fff [ 130.184459] R10: ffffbf98898afd00 R11: ffffffff9d9e8c28 R12: ffff9da7cddf1970 [ 130.191596] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 130.198739] FS: 00007f646435c740(0000) GS:ffff9daf9de00000(0000) knlGS:0000000000000000 [ 130.206832] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.212586] CR2: 00007f6463b214f0 CR3: 00000008ab98c000 CR4: 00000000003506e0 [ 130.219729] Call Trace: [ 130.222192] <TASK> [ 130.224305] dma_chan_put+0x10d/0x110 [ 130.227988] dmaengine_put+0x7a/0xa0 [ 130.231575] __do_sys_delete_module.constprop.0+0x178/0x280 [ 130.237157] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [ 130.242652] do_syscall_64+0x5c/0x90 [ 130.246240] ? exc_page_fault+0x62/0x150 [ 130.250178] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 130.255243] RIP: 0033:0x7f6463a3f5ab [ 130.258830] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 [ 130.277591] RSP: 002b:00007fff22f972c8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 130.285164] RAX: ffffffffffffffda RBX: 000055b6786edd40 RCX: 00007f6463a3f5ab [ 130.292303] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6786edda8 [ 130.299443] RBP: 000055b6786edd40 R08: 0000000000000000 R09: 0000000000000000 [ 130.306584] R10: 00007f6463b9eac0 R11: 0000000000000206 R12: 000055b6786edda8 [ 130.313731] R13: 0000000000000000 R14: 000055b6786edda8 R15: 00007fff22f995f8 [ 130.320875] </TASK> [ 130.323081] ---[ end trace eff7156d56b5cf25 ]--- cat /sys/class/dma/dma0chan*/in_use would get the wrong result. 2 2 2 Fixes: d2f4f99db3e9 ("dmaengine: Rework dma_chan_get") Signed-off-by: Koba Ko <[email protected]> Reviewed-by: Jie Hai <[email protected]> Test-by: Jie Hai <[email protected]> Reviewed-by: Jerry Snitselaar <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Tested-by: Joel Savitz <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-01-18dmaengine: tegra210-adma: fix global intr clearMohan Kumar1-1/+1
The current global interrupt clear programming register offset was not correct. Fix the programming with right offset Fixes: ded1f3db4cd6 ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips") Cc: [email protected] Signed-off-by: Mohan Kumar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-01-18Add exception protection processing for vd in axi_chan_handle_err functionShawn.Shao1-0/+6
Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]--- Signed-off-by: Shawn.Shao <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2023-01-18perf/x86/intel/cstate: Add Emerald RapidsKan Liang1-0/+1
From the perspective of Intel cstate residency counters, Emerald Rapids is the same as the Sapphire Rapids and Ice Lake. Add Emerald Rapids model. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-01-18perf/x86/intel: Add Emerald RapidsKan Liang1-0/+1
From core PMU's perspective, Emerald Rapids is the same as the Sapphire Rapids. The only difference is the event list, which will be supported in the perf tool later. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.