aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-02drm/amd: add support to check whether the system is set to s3Mario Limonciello2-0/+15
This will be used to help make decisions on what to do in misconfigured systems. v2: squash in semicolon fix from Stephen Rothwell Signed-off-by: Mario Limonciello <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-02-02Merge tag 'nfsd-5.17-1' of ↵Linus Torvalds2-9/+13
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: "Notable bug fixes: - Ensure SM_NOTIFY doesn't crash the NFS server host - Ensure NLM locks are cleaned up after client reboot - Fix a leak of internal NFSv4 lease information" * tag 'nfsd-5.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: nfsd4_setclientid_confirm mistakenly expires confirmed client. lockd: fix failure to cleanup client locks lockd: fix server crash on reboot of client holding lock
2022-02-02md: fix NULL pointer deref with nowait but no mddev->queueSong Liu1-4/+4
Leon reported NULL pointer deref with nowait support: [ 15.123761] device-mapper: raid: Loading target version 1.15.1 [ 15.124185] device-mapper: raid: Ignoring chunk size parameter for RAID 1 [ 15.124192] device-mapper: raid: Choosing default region size of 4MiB [ 15.129524] BUG: kernel NULL pointer dereference, address: 0000000000000060 [ 15.129530] #PF: supervisor write access in kernel mode [ 15.129533] #PF: error_code(0x0002) - not-present page [ 15.129535] PGD 0 P4D 0 [ 15.129538] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 15.129541] CPU: 5 PID: 494 Comm: ldmtool Not tainted 5.17.0-rc2-1-mainline #1 9fe89d43dfcb215d2731e6f8851740520778615e [ 15.129546] Hardware name: Gigabyte Technology Co., Ltd. X570 AORUS ELITE/X570 AORUS ELITE, BIOS F36e 10/14/2021 [ 15.129549] RIP: 0010:blk_queue_flag_set+0x7/0x20 [ 15.129555] Code: 00 00 00 0f 1f 44 00 00 48 8b 35 e4 e0 04 02 48 8d 57 28 bf 40 01 \ 00 00 e9 16 c1 be ff 66 0f 1f 44 00 00 0f 1f 44 00 00 89 ff <f0> 48 0f ab 7e 60 \ 31 f6 89 f7 c3 66 66 2e 0f 1f 84 00 00 00 00 00 [ 15.129559] RSP: 0018:ffff966b81987a88 EFLAGS: 00010202 [ 15.129562] RAX: ffff8b11c363a0d0 RBX: ffff8b11e294b070 RCX: 0000000000000000 [ 15.129564] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000001d [ 15.129566] RBP: ffff8b11e294b058 R08: 0000000000000000 R09: 0000000000000000 [ 15.129568] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8b11e294b070 [ 15.129570] R13: 0000000000000000 R14: ffff8b11e294b000 R15: 0000000000000001 [ 15.129572] FS: 00007fa96e826780(0000) GS:ffff8b18deb40000(0000) knlGS:0000000000000000 [ 15.129575] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 15.129577] CR2: 0000000000000060 CR3: 000000010b8ce000 CR4: 00000000003506e0 [ 15.129580] Call Trace: [ 15.129582] <TASK> [ 15.129584] md_run+0x67c/0xc70 [md_mod 1e470c1b6bcf1114198109f42682f5a2740e9531] [ 15.129597] raid_ctr+0x134a/0x28ea [dm_raid 6a645dd7519e72834bd7e98c23497eeade14cd63] [ 15.129604] ? dm_split_args+0x63/0x150 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129615] dm_table_add_target+0x188/0x380 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129625] table_load+0x13b/0x370 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129635] ? dev_suspend+0x2d0/0x2d0 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129644] ctl_ioctl+0x1bd/0x460 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129655] dm_ctl_ioctl+0xa/0x20 [dm_mod 0d7b0bc3414340a79c4553bae5ca97294b78336e] [ 15.129663] __x64_sys_ioctl+0x8e/0xd0 [ 15.129667] do_syscall_64+0x5c/0x90 [ 15.129672] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129675] ? do_syscall_64+0x69/0x90 [ 15.129677] ? do_syscall_64+0x69/0x90 [ 15.129679] ? syscall_exit_to_user_mode+0x23/0x50 [ 15.129682] ? do_syscall_64+0x69/0x90 [ 15.129684] ? do_syscall_64+0x69/0x90 [ 15.129686] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 15.129689] RIP: 0033:0x7fa96ecd559b [ 15.129692] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c 89 e0 41 5c \ c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff \ ff 73 01 c3 48 8b 0d a5 a8 0c 00 f7 d8 64 89 01 48 [ 15.129696] RSP: 002b:00007ffcaf85c258 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 [ 15.129699] RAX: ffffffffffffffda RBX: 00007fa96f1b48f0 RCX: 00007fa96ecd559b [ 15.129701] RDX: 00007fa97017e610 RSI: 00000000c138fd09 RDI: 0000000000000003 [ 15.129702] RBP: 00007fa96ebab583 R08: 00007fa97017c9e0 R09: 00007ffcaf85bf27 [ 15.129704] R10: 0000000000000001 R11: 0000000000000206 R12: 00007fa97017e610 [ 15.129706] R13: 00007fa97017e640 R14: 00007fa97017e6c0 R15: 00007fa97017e530 [ 15.129709] </TASK> This is caused by missing mddev->queue check for setting QUEUE_FLAG_NOWAIT Fix this by moving the QUEUE_FLAG_NOWAIT logic to under mddev->queue check. Fixes: f51d46d0e7cb ("md: add support for REQ_NOWAIT") Reported-by: Leon Möller <[email protected]> Tested-by: Leon Möller <[email protected]> Cc: Vishal Verma <[email protected]> Signed-off-by: Song Liu <[email protected]>
2022-02-02Merge tag 'fsnotify_for_v5.17-rc3' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull fanotify fix from Jan Kara: "Fix stale file descriptor in copy_event_to_user" * tag 'fsnotify_for_v5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: fanotify: Fix stale file descriptor in copy_event_to_user()
2022-02-02Merge tag 'linux-kselftest-kunit-fixes-5.17-rc3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "A single fix to an error seen on qemu due to a missing import" * tag 'linux-kselftest-kunit-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Import missing importlib.abc
2022-02-02libceph: optionally use bounce buffer on recv path in crc modeIlya Dryomov6-20/+105
Both msgr1 and msgr2 in crc mode are zero copy in the sense that message data is read from the socket directly into the destination buffer. We assume that the destination buffer is stable (i.e. remains unchanged while it is being read to) though. Otherwise, CRC errors ensue: libceph: read_partial_message 0000000048edf8ad data crc 1063286393 != exp. 228122706 libceph: osd1 (1)192.168.122.1:6843 bad crc/signature libceph: bad data crc, calculated 57958023, expected 1805382778 libceph: osd2 (2)192.168.122.1:6876 integrity error, bad crc Introduce rxbounce option to enable use of a bounce buffer when receiving message data. In particular this is needed if a mapped image is a Windows VM disk, passed to QEMU. Windows has a system-wide "dummy" page that may be mapped into the destination buffer (potentially more than once into the same buffer) by the Windows Memory Manager in an effort to generate a single large I/O [1][2]. QEMU makes a point of preserving overlap relationships when cloning I/O vectors, so krbd gets exposed to this behaviour. [1] "What Is Really in That MDL?" https://docs.microsoft.com/en-us/previous-versions/windows/hardware/design/dn614012(v=vs.85) [2] https://blogs.msmvps.com/kernelmustard/2005/05/04/dummy-pages/ URL: https://bugzilla.redhat.com/show_bug.cgi?id=1973317 Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jeff Layton <[email protected]>
2022-02-02libceph: make recv path in secure mode work the same as send pathIlya Dryomov2-62/+158
The recv path of secure mode is intertwined with that of crc mode. While it's slightly more efficient that way (the ciphertext is read into the destination buffer and decrypted in place, thus avoiding two potentially heavy memory allocations for the bounce buffer and the corresponding sg array), it isn't really amenable to changes. Sacrifice that edge and align with the send path which always uses a full-sized bounce buffer (currently there is no other way -- if the kernel crypto API ever grows support for streaming (piecewise) en/decryption for GCM [1], we would be able to easily take advantage of that on both sides). [1] https://lore.kernel.org/all/[email protected]/ Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jeff Layton <[email protected]>
2022-02-02Merge tag 'pinctrl-v5.17-2' of ↵Linus Torvalds9-105/+101
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Most interesting and urgent is the Intel stuff affecting Chromebooks and laptops. - Fix up group name building on the Intel Thunderbay - Fix interrupt problems on the Intel Cherryview - Fix some pin data on the Sunxi H616 - Fix up the CONFIG_PINCTRL_ST Kconfig sort order as noted during the merge window - Fix an unexpected interrupt problem on the Intel Sunrisepoint - Fix a glitch when updating IRQ flags on all Intel pin controllers - Revert a Zynqmp patch to unify the pin naming, let's find some better solution - Fix some error paths in the Broadcom BCM2835 driver - Fix a Kconfig problem pertaining to the BCM63XX drivers - Fix the regmap support in the Microchip SGPIO driver" * tag 'pinctrl-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: microchip-sgpio: Fix support for regmap pinctrl: bcm63xx: fix unmet dependency on REGMAP for GPIO_REGMAP pinctrl: bcm2835: Fix a few error paths pinctrl: zynqmp: Revert "Unify pin naming" pinctrl: intel: Fix a glitch when updating IRQ flags on a preconfigured line pinctrl: intel: fix unexpected interrupt pinctrl: Place correctly CONFIG_PINCTRL_ST in the Makefile pinctrl: sunxi: Fix H616 I2S3 pin data pinctrl: cherryview: Trigger hwirq0 for interrupt-lines without a mapping pinctrl: thunderbay: rework loops looking for groups names pinctrl: thunderbay: comment process of building functions a bit
2022-02-02net: sparx5: do not refer to skb after passing it onSteen Hegelund1-1/+1
Do not try to use any SKB fields after the packet has been passed up in the receive stack. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Steen Hegelund <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-02selinux: fix double free of cond_list on error pathsVratislav Bendel1-1/+2
On error path from cond_read_list() and duplicate_policydb_cond_list() the cond_list_destroy() gets called a second time in caller functions, resulting in NULL pointer deref. Fix this by resetting the cond_list_len to 0 in cond_list_destroy(), making subsequent calls a noop. Also consistently reset the cond_list pointer to NULL after freeing. Cc: [email protected] Signed-off-by: Vratislav Bendel <[email protected]> [PM: fix line lengths in the description] Signed-off-by: Paul Moore <[email protected]>
2022-02-02Partially revert "net/smc: Add netlink net namespace support"Dmitry V. Levin2-8/+5
The change of sizeof(struct smc_diag_linkinfo) by commit 79d39fc503b4 ("net/smc: Add netlink net namespace support") introduced an ABI regression: since struct smc_diag_lgrinfo contains an object of type "struct smc_diag_linkinfo", offset of all subsequent members of struct smc_diag_lgrinfo was changed by that change. As result, applications compiled with the old version of struct smc_diag_linkinfo will receive garbage in struct smc_diag_lgrinfo.role if the kernel implements this new version of struct smc_diag_linkinfo. Fix this regression by reverting the part of commit 79d39fc503b4 that changes struct smc_diag_linkinfo. After all, there is SMC_GEN_NETLINK interface which is good enough, so there is probably no need to touch the smc_diag ABI in the first place. Fixes: 79d39fc503b4 ("net/smc: Add netlink net namespace support") Signed-off-by: Dmitry V. Levin <[email protected]> Reviewed-by: Karsten Graul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-02Merge tag 'kvm-riscv-fixes-5.17-1' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini2-18/+33
into HEAD KVM/riscv fixes for 5.17, take #1 - Rework guest entry logic - Make CY, TM, and IR counters accessible in VU mode - Fix SBI implementation version
2022-02-02block: fix DIO handling regressions in blkdev_read_iter()Ilya Dryomov1-14/+19
Commit ceaa762527f4 ("block: move direct_IO into our own read_iter handler") introduced several regressions for bdev DIO: 1. read spanning EOF always returns 0 instead of the number of bytes read. This is because "count" is assigned early and isn't updated when the iterator is truncated: $ lsblk -o name,size /dev/vdb NAME SIZE vdb 1G $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 0/4194304 bytes at offset 1070596096 0.000000 bytes, 0 ops; 0.0007 sec (0.000000 bytes/sec and 0.0000 ops/sec) instead of $ xfs_io -d -c 'pread -b 4M 1021M 4M' /dev/vdb read 3145728/4194304 bytes at offset 1070596096 3 MiB, 1 ops; 0.0007 sec (3.865 GiB/sec and 1319.2612 ops/sec) 2. truncated iterator isn't reexpanded 3. iterator isn't reverted on blkdev_direct_IO() error 4. zero size read no longer skips atime update Fixes: ceaa762527f4 ("block: move direct_IO into our own read_iter handler") Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-02-02Merge tag 'mlx5-fixes-2022-02-01' of ↵David S. Miller17-55/+102
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-02-01 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. Sorry about the long series, but I had to move the top two patches from net-next to net to help avoiding a build break when kspp branch is merged into linus-next on next merge window. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-02-02fbcon: Add option to enable legacy hardware accelerationHelge Deller7-34/+84
Add a config option CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION to enable bitblt and fillrect hardware acceleration in the framebuffer console. If disabled, such acceleration will not be used, even if it is supported by the graphics hardware driver. If you plan to use DRM as your main graphics output system, you should disable this option since it will prevent compiling in code which isn't used later on when DRM takes over. For all other configurations, e.g. if none of your graphic cards support DRM (yet), DRM isn't available for your architecture, or you can't be sure that the graphic card in the target system will support DRM, you most likely want to enable this option. In the non-accelerated case (e.g. when DRM is used), the inlined fb_scrollmode() function is hardcoded to return SCROLL_REDRAW and as such the compiler is able to optimize much unneccesary code away. In this v3 patch version I additionally changed the GETVYRES() and GETVXRES() macros to take a pointer to the fbcon_display struct. This fixes the build when console rotation is enabled and helps the compiler again to optimize out code. Signed-off-by: Helge Deller <[email protected]> Cc: [email protected] # v5.10+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-02Revert "fbcon: Disable accelerated scrolling"Helge Deller2-29/+37
This reverts commit 39aead8373b3c20bb5965c024dfb51a94e526151. Revert the first (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Sven Schnelle <[email protected]> Cc: [email protected] # v5.10+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-02Revert "fbdev: Garbage collect fbdev scrolling acceleration, part 1 (from ↵Helge Deller11-51/+678
TODO list)" This reverts commit b3ec8cdf457e5e63d396fe1346cc788cf7c1b578. Revert the second (of 2) commits which disabled scrolling acceleration in fbcon/fbdev. It introduced a regression for fbdev-supported graphic cards because of the performance penalty by doing screen scrolling by software instead of using the existing graphic card 2D hardware acceleration. Console scrolling acceleration was disabled by dropping code which checked at runtime the driver hardware capabilities for the BINFO_HWACCEL_COPYAREA or FBINFO_HWACCEL_FILLRECT flags and if set, it enabled scrollmode SCROLL_MOVE which uses hardware acceleration to move screen contents. After dropping those checks scrollmode was hard-wired to SCROLL_REDRAW instead, which forces all graphic cards to redraw every character at the new screen position when scrolling. This change effectively disabled all hardware-based scrolling acceleration for ALL drivers, because now all kind of 2D hardware acceleration (bitblt, fillrect) in the drivers isn't used any longer. The original commit message mentions that only 3 DRM drivers (nouveau, omapdrm and gma500) used hardware acceleration in the past and thus code for checking and using scrolling acceleration is obsolete. This statement is NOT TRUE, because beside the DRM drivers there are around 35 other fbdev drivers which depend on fbdev/fbcon and still provide hardware acceleration for fbdev/fbcon. The original commit message also states that syzbot found lots of bugs in fbcon and thus it's "often the solution to just delete code and remove features". This is true, and the bugs - which actually affected all users of fbcon, including DRM - were fixed, or code was dropped like e.g. the support for software scrollback in vgacon (commit 973c096f6a85). So to further analyze which bugs were found by syzbot, I've looked through all patches in drivers/video which were tagged with syzbot or syzkaller back to year 2005. The vast majority fixed the reported issues on a higher level, e.g. when screen is to be resized, or when font size is to be changed. The few ones which touched driver code fixed a real driver bug, e.g. by adding a check. But NONE of those patches touched code of either the SCROLL_MOVE or the SCROLL_REDRAW case. That means, there was no real reason why SCROLL_MOVE had to be ripped-out and just SCROLL_REDRAW had to be used instead. The only reason I can imagine so far was that SCROLL_MOVE wasn't used by DRM and as such it was assumed that it could go away. That argument completely missed the fact that SCROLL_MOVE is still heavily used by fbdev (non-DRM) drivers. Some people mention that using memcpy() instead of the hardware acceleration is pretty much the same speed. But that's not true, at least not for older graphic cards and machines where we see speed decreases by factor 10 and more and thus this change leads to console responsiveness way worse than before. That's why the original commit is to be reverted. By reverting we reintroduce hardware-based scrolling acceleration and fix the performance regression for fbdev drivers. There isn't any impact on DRM when reverting those patches. Signed-off-by: Helge Deller <[email protected]> Acked-by: Geert Uytterhoeven <[email protected]> Acked-by: Sven Schnelle <[email protected]> Cc: [email protected] # v5.16+ Signed-off-by: Helge Deller <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-02RISC-V: KVM: Fix SBI implementation versionAnup Patel1-1/+2
The SBI implementation version returned by KVM RISC-V should be the Host Linux version code. Fixes: c62a76859723 ("RISC-V: KVM: Add SBI v0.2 base extension") Signed-off-by: Anup Patel <[email protected]> Reviewed-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2022-02-02RISC-V: KVM: make CY, TM, and IR counters accessible in VU modeMayuresh Chitale1-0/+4
Those applications that run in VU mode and access the time CSR cause a virtual instruction trap as Guest kernel currently does not initialize the scounteren CSR. To fix this, we should make CY, TM, and IR counters accessibile by default in VU mode (similar to OpenSBI). Fixes: a33c72faf2d73 ("RISC-V: KVM: Implement VCPU create, init and destroy functions") Cc: [email protected] Signed-off-by: Mayuresh Chitale <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2022-02-02kvm/riscv: rework guest entry logicMark Rutland1-17/+27
In kvm_arch_vcpu_ioctl_run() we enter an RCU extended quiescent state (EQS) by calling guest_enter_irqoff(), and unmask IRQs prior to exiting the EQS by calling guest_exit(). As the IRQ entry code will not wake RCU in this case, we may run the core IRQ code and IRQ handler without RCU watching, leading to various potential problems. Additionally, we do not inform lockdep or tracing that interrupts will be enabled during guest execution, which caan lead to misleading traces and warnings that interrupts have been enabled for overly-long periods. This patch fixes these issues by using the new timing and context entry/exit helpers to ensure that interrupts are handled during guest vtime but with RCU watching, with a sequence: guest_timing_enter_irqoff(); guest_state_enter_irqoff(); < run the vcpu > guest_state_exit_irqoff(); < take any pending IRQs > guest_timing_exit_irqoff(); Since instrumentation may make use of RCU, we must also ensure that no instrumented code is run during the EQS. I've split out the critical section into a new kvm_riscv_enter_exit_vcpu() helper which is marked noinstr. Fixes: 99cdc6c18c2d815e ("RISC-V: Add initial skeletal KVM support") Signed-off-by: Mark Rutland <[email protected]> Cc: Albert Ou <[email protected]> Cc: Anup Patel <[email protected]> Cc: Atish Patra <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Palmer Dabbelt <[email protected]> Cc: Paolo Bonzini <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Paul Walmsley <[email protected]> Tested-by: Anup Patel <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2022-02-02nvme-rdma: fix possible use-after-free in transport error_recovery workSagi Grimberg1-0/+1
While nvme_rdma_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Signed-off-by: Sagi Grimberg <[email protected]>
2022-02-02nvme-tcp: fix possible use-after-free in transport error_recovery workSagi Grimberg1-0/+1
While nvme_tcp_submit_async_event_work is checking the ctrl and queue state before preparing the AER command and scheduling io_work, in order to fully prevent a race where this check is not reliable the error recovery work must flush async_event_work before continuing to destroy the admin queue after setting the ctrl state to RESETTING such that there is no race .submit_async_event and the error recovery handler itself changing the ctrl state. Tested-by: Chris Leech <[email protected]> Signed-off-by: Sagi Grimberg <[email protected]>
2022-02-02nvme: fix a possible use-after-free in controller reset during loadSagi Grimberg1-1/+8
Unlike .queue_rq, in .submit_async_event drivers may not check the ctrl readiness for AER submission. This may lead to a use-after-free condition that was observed with nvme-tcp. The race condition may happen in the following scenario: 1. driver executes its reset_ctrl_work 2. -> nvme_stop_ctrl - flushes ctrl async_event_work 3. ctrl sends AEN which is received by the host, which in turn schedules AEN handling 4. teardown admin queue (which releases the queue socket) 5. AEN processed, submits another AER, calling the driver to submit 6. driver attempts to send the cmd ==> use-after-free In order to fix that, add ctrl state check to validate the ctrl is actually able to accept the AER submission. This addresses the above race in controller resets because the driver during teardown should: 1. change ctrl state to RESETTING 2. flush async_event_work (as well as other async work elements) So after 1,2, any other AER command will find the ctrl state to be RESETTING and bail out without submitting the AER. Signed-off-by: Sagi Grimberg <[email protected]>
2022-02-01Merge branch '1GbE' of ↵Jakub Kicinski3-19/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-01 This series contains updates to e1000e driver only. Sasha removes CSME handshake with TGL platform as this is not supported and is causing hardware unit hangs to be reported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Handshake with CSME starts from ADL platforms e1000e: Separate ADP board type from TGP ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01net/mlx5e: Avoid field-overflowing memcpy()Kees Cook2-4/+6
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Use struct_group() for memcpy() regionKees Cook2-3/+5
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct vlan_ethhdr around members h_dest and h_source, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of h_dest. "pahole" shows no size nor member offset changes to struct vlan_ethhdr. "objdump -d" shows no object code changes. Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB") Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Avoid implicit modify hdr for decap drop ruleRoi Dayan1-1/+2
Currently the driver adds implicit modify hdr action for decap rules on tunnel devices if the port is an ovs port. This is also done if the action is drop and makes the modify hdr redundant and also the FW doesn't support it and will generate a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fix it by adding the implicit modify hdr only for fwd actions. Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Ariel Levkovich <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP trafficRaed Salem1-2/+11
IPsec Tunnel mode crypto offload software parser (SWP) setting in data path currently always set the inner L4 offset regardless of the encapsulated L4 header type and whether it exists in the first place, this breaks non TCP/UDP traffic as such. Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4 header protocol is TCP/UDP. While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP flag to address the case where the ip header protocol is IPv6. Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Raed Salem <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated trafficRaed Salem1-3/+6
IPsec crypto offload always set the ethernet segment checksum flags with the inner L4 header checksum flag enabled for encapsulated IPsec offloaded packet regardless of the encapsulated L4 header type, and even if it doesn't exists in the first place, this breaks non TCP/UDP traffic as such. Set the inner L4 checksum flag only when the encapsulated L4 header protocol is TCP/UDP using software parser swp_inner_l4_offset field as indication. Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.") Signed-off-by: Raed Salem <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Don't treat small ceil values as unlimited in HTB offloadMaxim Mikityanskiy1-1/+2
The hardware spec defines max_average_bw == 0 as "unlimited bandwidth". max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become 0 when ceil is small, leading to an undesired effect of having no bandwidth limit. This commit fixes it by rounding up small values of ceil to 1 Mbit/s. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5: E-Switch, Fix uninitialized variable modactMaor Dickman1-1/+1
The variable modact is not initialized before used in command modify header allocation which can cause command to fail. Fix by initializing modact with zeros. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Fix handling of wrong devices during bond neteventMaor Dickman1-18/+14
Current implementation of bond netevent handler only check if the handled netdev is VF representor and it missing a check if the VF representor is on the same phys device of the bond handling the netevent. Fix by adding the missing check and optimizing the check if the netdev is VF representor so it will not access uninitialized private data and crashes. BUG: kernel NULL pointer dereference, address: 000000000000036c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Workqueue: eth3bond0 bond_mii_monitor [bonding] RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core] RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000 RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880 RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008 R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10 R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core] mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core] mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core] raw_notifier_call_chain+0x41/0x60 call_netdevice_notifiers_info+0x34/0x80 netdev_lower_state_changed+0x4e/0xa0 bond_mii_monitor+0x56b/0x640 [bonding] process_one_work+0x1b9/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Fix broken SKB allocation in HW-GROKhalid Manaa1-9/+17
In case the HW doesn't perform header-data split, it will write the whole packet into the data buffer in the WQ, in this case the SHAMPO CQE handler couldn't use the header entry to build the SKB, instead it should allocate a new memory to build the SKB using the function: mlx5e_skb_from_cqe_mpwrq_nonlinear. Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Khalid Manaa <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Fix wrong calculation of header index in HW_GROKhalid Manaa2-2/+7
The HW doesn't wrap the CQE.shampo.header_index field according to the headers buffer size, instead it always increases it until reaching overflow of u16 size. Thus the mlx5e_handle_rx_cqe_mpwrq_shampo handler should mask the CQE header_index field to find the actual header index in the headers buffer. Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Khalid Manaa <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5: Bridge, Fix devlink deadlock on net namespace deletionRoi Dayan1-2/+2
When changing mode to switchdev, rep bridge init registered to netdevice notifier holds the devlink lock and then takes pernet_ops_rwsem. At that time deleting a netns holds pernet_ops_rwsem and then takes the devlink lock. Example sequence is: $ ip netns add foo $ devlink dev eswitch set pci/0000:00:08.0 mode switchdev & $ ip netns del foo deleting netns trace: [ 1185.365555] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.368331] ? mutex_lock_io_nested+0x13f0/0x13f0 [ 1185.370984] ? xt_find_table+0x40/0x100 [ 1185.373244] ? __mutex_lock+0x24a/0x15a0 [ 1185.375494] ? net_generic+0xa0/0x1c0 [ 1185.376844] ? wait_for_completion_io+0x280/0x280 [ 1185.377767] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.378686] devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.379579] ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0 [ 1185.380557] ? xt_find_table+0xda/0x100 [ 1185.381367] cleanup_net+0x372/0x8e0 changing mode to switchdev trace: [ 1185.411267] down_write+0x13a/0x150 [ 1185.412029] ? down_write_killable+0x180/0x180 [ 1185.413005] register_netdevice_notifier+0x1e/0x210 [ 1185.414000] mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core] [ 1185.415243] mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core] [ 1185.416464] ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core] [ 1185.417749] mlx5e_attach_netdev+0x232/0x400 [mlx5_core] [ 1185.418906] mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core] [ 1185.420172] mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core] [ 1185.421459] mlx5e_vport_rep_load+0x557/0x780 [mlx5_core] [ 1185.422624] ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core] [ 1185.424006] mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core] [ 1185.425277] esw_offloads_enable+0xd74/0x14a0 [mlx5_core] Fix this by registering rep bridges for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLEDima Chumak1-3/+4
Only prio 1 is supported for nic mode when there is no ignore flow level support in firmware. But for switchdev mode, which supports fixed number of statically pre-allocated prios, this restriction is not relevant so it can be relaxed. Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode") Signed-off-by: Dima Chumak <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: TC, Reject rules with forward and drop actionsRoi Dayan1-0/+6
Such rules are redundant but allowed and passed to the driver. The driver does not support offloading such rules so return an error. Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Oz Shlomo <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5: Use del_timer_sync in fw reset flow of halting pollMaher Sanalla1-1/+1
Substitute del_timer() with del_timer_sync() in fw reset polling deactivation flow, in order to prevent a race condition which occurs when del_timer() is called and timer is deactivated while another process is handling the timer interrupt. A situation that led to the following call trace: RIP: 0010:run_timer_softirq+0x137/0x420 <IRQ> recalibrate_cpu_khz+0x10/0x10 ktime_get+0x3e/0xa0 ? sched_clock_cpu+0xb/0xc0 __do_softirq+0xf5/0x2ea irq_exit_rcu+0xc1/0xf0 sysvec_apic_timer_interrupt+0x9e/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 </IRQ> Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Maher Sanalla <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: Fix module EEPROM queryGal Pressman1-4/+5
When querying the module EEPROM, there was a misusage of the 'offset' variable vs the 'query.offset' field. Fix that by always using 'offset' and assigning its value to 'query.offset' right before the mcia register read call. While at it, the cross-pages read size adjustment was changed to be more intuitive. Fixes: e19b0a3474ab ("net/mlx5: Refactor module EEPROM query") Reported-by: Wang Yugui <[email protected]> Signed-off-by: Gal Pressman <[email protected]> Reviewed-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5e: TC, Reject rules with drop and modify hdr actionRoi Dayan1-0/+6
This kind of action is not supported by firmware and generates a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Oz Shlomo <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5: Bridge, ensure dev_name is null-terminatedVlad Buslov1-1/+1
Even though net_device->name is guaranteed to be null-terminated string of size<=IFNAMSIZ, the test robot complains that return value of netdev_name() can be larger: In file included from include/trace/define_trace.h:102, from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113, from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12: drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template': >> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation] 24 | strncpy(__entry->dev_name, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ 25 | netdev_name(fdb->dev), | ~~~~~~~~~~~~~~~~~~~~~~ 26 | IFNAMSIZ); | ~~~~~~~~~ This is caused by the fact that default value of IFNAMSIZ is 16, while placeholder value that is returned by netdev_name() for unnamed net devices is larger than that. The offending code is in a tracing function that is only called for mlx5 representors, so there is no straightforward way to reproduce the issue but let's fix it for correctness sake by replacing strncpy() with strscpy() to ensure that resulting string is always null-terminated. Fixes: 9724fd5d9c2a ("net/mlx5: Bridge, add tracepoints") Reported-by: kernel test robot <[email protected]> Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01net/mlx5: Bridge, take rtnl lock in init error handlerVlad Buslov2-0/+6
The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock taken, which is true for mlx5e_rep_bridge_cleanup() function but not for error handling code in mlx5e_rep_bridge_init(). Add missing rtnl lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant from now on. Fixes: 7cd6a54a8285 ("net/mlx5: Bridge, handle FDB events") Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-02-01Merge branch '40GbE' of ↵Jakub Kicinski2-2/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-01-31 This series contains updates to i40e driver only. Jedrzej fixes a condition check which would cause an error when resetting bandwidth when DCB is active with one TC. Karen resolves a null pointer dereference that could occur when removing the driver while VSI rings are being disabled. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix reset path while removing the driver i40e: Fix reset bw limit when DCB enabled with 1 TC ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01net: macsec: Verify that send_sci is on when setting Tx sci explicitlyLior Nahmanson1-0/+9
When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <[email protected]> Reviewed-by: Raed Salem <[email protected]> Signed-off-by: Raed Salem <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01ipheth: fix EOVERFLOW in ipheth_rcvbulk_callbackGeorgi Valkov1-3/+3
When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov <[email protected]> Tested-by: Jan Kiszka <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01tcp: fix mem under-charging with zerocopy sendmsg()Eric Dumazet1-2/+5
We got reports of following warning in inet_sock_destruct() WARN_ON(sk_forward_alloc_get(sk)); Whenever we add a non zero-copy fragment to a pure zerocopy skb, we have to anticipate that whole skb->truesize will be uncharged when skb is finally freed. skb->data_len is the payload length. But the memory truesize estimated by __zerocopy_sg_from_iter() is page aligned. Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs") Signed-off-by: Eric Dumazet <[email protected]> Cc: Talal Ahmad <[email protected]> Cc: Arjun Roy <[email protected]> Cc: Willem de Bruijn <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01af_packet: fix data-race in packet_setsockopt / packet_setsockoptEric Dumazet1-2/+6
When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout, no lock is held, meaning that another thread can change po->fanout. Given that po->fanout can only be set once during the socket lifetime (it is only cleared from fanout_release()), we can use READ_ONCE()/WRITE_ONCE() to document the race. BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0: fanout_add net/packet/af_packet.c:1791 [inline] packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1: packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000000000000000 -> 0xffff888106f8c000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 47dceb8ecdc1 ("packet: add classic BPF fanout mode") Signed-off-by: Eric Dumazet <[email protected]> Cc: Willem de Bruijn <[email protected]> Reported-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()Eric Dumazet1-2/+4
While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it. Fixes: ba7d49b1f0f8 ("rtnetlink: provide api for getting and setting slave info") Signed-off-by: Eric Dumazet <[email protected]> Cc: Jiri Pirko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01net: sched: fix use-after-free in tc_new_tfilter()Eric Dumazet1-4/+7
Whenever tc_new_tfilter() jumps back to replay: label, we need to make sure @q and @chain local variables are cleared again, or risk use-after-free as in [1] For consistency, apply the same fix in tc_ctl_chain() BUG: KASAN: use-after-free in mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581 Write of size 8 at addr ffff8880985c4b08 by task syz-executor.4/1945 CPU: 0 PID: 1945 Comm: syz-executor.4 Not tainted 5.17.0-rc1-syzkaller-00495-gff58831fa02d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581 tcf_chain_head_change_item net/sched/cls_api.c:372 [inline] tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:386 tcf_chain_tp_insert net/sched/cls_api.c:1657 [inline] tcf_chain_tp_insert_unique net/sched/cls_api.c:1707 [inline] tc_new_tfilter+0x1e67/0x2350 net/sched/cls_api.c:2086 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2647172059 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2645aa5168 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f2647285100 RCX: 00007f2647172059 RDX: 040000000000009f RSI: 00000000200002c0 RDI: 0000000000000006 RBP: 00007f26471cc08d R08: 0000000000000000 R09: 0000000000000000 R10: 9e00000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffb3f7f02f R14: 00007f2645aa5300 R15: 0000000000022000 </TASK> Allocated by task 1944: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:524 kmalloc_node include/linux/slab.h:604 [inline] kzalloc_node include/linux/slab.h:726 [inline] qdisc_alloc+0xac/0xa10 net/sched/sch_generic.c:941 qdisc_create.constprop.0+0xce/0x10f0 net/sched/sch_api.c:1211 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5592 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 3609: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0x130/0x160 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] slab_free_hook mm/slub.c:1728 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1754 slab_free mm/slub.c:3509 [inline] kfree+0xcb/0x280 mm/slub.c:4562 rcu_do_batch kernel/rcu/tree.c:2527 [inline] rcu_core+0x7b8/0x1540 kernel/rcu/tree.c:2778 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:3026 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3106 qdisc_put_unlocked+0x6f/0x90 net/sched/sch_generic.c:1109 tcf_block_release+0x86/0x90 net/sched/cls_api.c:1238 tc_new_tfilter+0xc0d/0x2350 net/sched/cls_api.c:2148 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff8880985c4800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 776 bytes inside of 1024-byte region [ffff8880985c4800, ffff8880985c4c00) The buggy address belongs to the page: page:ffffea0002617000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x985c0 head:ffffea0002617000 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888010c41dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 1941, ts 1038999441284, free_ts 1033444432829 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271 alloc_slab_page mm/slub.c:1799 [inline] allocate_slab mm/slub.c:1944 [inline] new_slab+0x28a/0x3b0 mm/slub.c:2004 ___slab_alloc+0x87c/0xe90 mm/slub.c:3018 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105 slab_alloc_node mm/slub.c:3196 [inline] slab_alloc mm/slub.c:3238 [inline] __kmalloc+0x2fb/0x340 mm/slub.c:4420 kmalloc include/linux/slab.h:586 [inline] kzalloc include/linux/slab.h:715 [inline] __register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1335 neigh_sysctl_register+0x2c8/0x5e0 net/core/neighbour.c:3787 devinet_sysctl_register+0xb1/0x230 net/ipv4/devinet.c:2618 inetdev_init+0x286/0x580 net/ipv4/devinet.c:278 inetdev_event+0xa8a/0x15d0 net/ipv4/devinet.c:1532 notifier_call_chain+0xb5/0x200 kernel/notifier.c:84 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1919 call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] register_netdevice+0x1073/0x1500 net/core/dev.c:9698 veth_newlink+0x59c/0xa90 drivers/net/veth.c:1722 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 release_pages+0x748/0x1220 mm/swap.c:956 tlb_batch_pages_flush mm/mmu_gather.c:50 [inline] tlb_flush_mmu_free mm/mmu_gather.c:243 [inline] tlb_flush_mmu+0xe9/0x6b0 mm/mmu_gather.c:250 zap_pte_range mm/memory.c:1441 [inline] zap_pmd_range mm/memory.c:1490 [inline] zap_pud_range mm/memory.c:1519 [inline] zap_p4d_range mm/memory.c:1540 [inline] unmap_page_range+0x1d1d/0x2a30 mm/memory.c:1561 unmap_single_vma+0x198/0x310 mm/memory.c:1606 unmap_vmas+0x16b/0x2f0 mm/memory.c:1638 exit_mmap+0x201/0x670 mm/mmap.c:3178 __mmput+0x122/0x4b0 kernel/fork.c:1114 mmput+0x56/0x60 kernel/fork.c:1135 exit_mm kernel/exit.c:507 [inline] do_exit+0xa3c/0x2a30 kernel/exit.c:793 do_group_exit+0xd2/0x2f0 kernel/exit.c:935 __do_sys_exit_group kernel/exit.c:946 [inline] __se_sys_exit_group kernel/exit.c:944 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:944 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff8880985c4a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880985c4a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880985c4b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880985c4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880985c4c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <[email protected]> Cc: Vlad Buslov <[email protected]> Cc: Jiri Pirko <[email protected]> Cc: Cong Wang <[email protected]> Reported-by: syzbot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-01ethernet: smc911x: fix indentation in get/set EEPROMJakub Kicinski1-4/+4
Build bot produced a smatch indentation warning, the code looks correct but it mixes spaces and tabs. Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.