| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
* clk-microchip:
clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
clock, reset: microchip: move all mpfs reset code to the reset subsystem
* clk-samsung:
clk: samsung: Don't register clkdev lookup for the fixed rate clocks
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit
clk: samsung: gs101: propagate PERIC1 USI SPI clock rate
clk: samsung: gs101: propagate PERIC0 USI SPI clock rate
clk: samsung: exynosautov9: fix wrong pll clock id value
dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema
clk: samsung: exynos850: Add CMU_CPUCL0 and CMU_CPUCL1
clk: samsung: Implement manual PLL control for ARM64 SoCs
* clk-qcom: (27 commits)
clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
clk: qcom: Fix SM_GPUCC_8650 dependencies
clk: qcom: Fix SC_CAMCC_8280XP dependencies
clk: qcom: mmcc-msm8998: fix venus clock issue
clk: qcom: dispcc-sm8650: fix DisplayPort clocks
clk: qcom: dispcc-sm8550: fix DisplayPort clocks
clk: qcom: dispcc-sm6350: fix DisplayPort clocks
clk: qcom: dispcc-sm8450: fix DisplayPort clocks
clk: qcom: clk-cbf-8996: use HUAYRA_APSS register map for cbf_pll
clk: qcom: apss-ipq-pll: constify clk_init_data structures
clk: qcom: apss-ipq-pll: constify match data structures
clk: qcom: apss-ipq-pll: move Huayra register map to 'clk_alpha_pll_regs'
clk: qcom: apss-ipq-pll: reuse Stromer reg offsets from 'clk_alpha_pll_regs'
clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure
clk: qcom: gcc-ipq8074: rework nss_port5/6 clock to multiple conf
clk: qcom: clk-rcg2: add support for rcg2 freq multi ops
clk: qcom: clk-rcg: introduce support for multiple conf for same freq
clk: qcom: hfpll: Add QCS404-specific compatible
dt-bindings: clock: qcom,hfpll: Convert to YAML
...
|
|
'clk-rockchip' into clk-next
* clk-counted:
clk: bcm: rpi: Assign ->num before accessing ->hws
clk: bcm: dvp: Assign ->num before accessing ->hws
* clk-imx:
clk: imx: imx8mp: Convert to platform remove callback returning void
clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
clk: imx: add i.MX95 BLK CTL clk driver
dt-bindings: clock: support i.MX95 Display Master CSR module
dt-bindings: clock: support i.MX95 BLK CTL module
dt-bindings: clock: add i.MX95 clock header
clk: imx: imx8mp: Add pm_runtime support for power saving
* clk-amlogic:
clk: meson: s4: fix module autoloading
clk: meson: fix module license to GPL only
clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
clk: meson: add vclk driver
clk: meson: pll: print out pll name when unable to lock it
clk: meson: s4: pll: determine maximum register in regmap config
clk: meson: s4: peripherals: determine maximum register in regmap config
clk: meson: a1: pll: determine maximum register in regmap config
clk: meson: a1: peripherals: determine maximum register in regmap config
* clk-binding:
dt-bindings: clock: fixed: Define a preferred node name
* clk-rockchip:
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
clk: rockchip: rk3588: Add reset line for HDMI Receiver
clk: rockchip: rk3568: Add missing USB480M_PHY mux
dt-bindings: reset: Define reset id used for HDMI Receiver
dt-bindings: clock: rockchip: add USB480M_PHY mux
|
|
clk-next
- STM32MP257 SoC clk driver
- Allocate clk_ops dynamically for SCMI clk driver
* clk-stm:
dt-bindings: clocks: stm32mp25: add access-controllers description
clk: stm32: introduce clocks for STM32MP257 platform
dt-bindings: clocks: stm32mp25: add description of all parents
clk: stm32mp13: use platform device APIs
* clk-renesas:
clk: renesas: r9a08g045: Add support for power domains
clk: renesas: rzg2l: Extend power domain support
dt-bindings: clock: renesas,rzg2l-cpg: Update #power-domain-cells = <1> for RZ/G3S
dt-bindings: clock: r9a08g045-cpg: Add power domain IDs
dt-bindings: clock: r9a07g054-cpg: Add power domain IDs
dt-bindings: clock: r9a07g044-cpg: Add power domain IDs
dt-bindings: clock: r9a07g043-cpg: Add power domain IDs
clk: renesas: shmobile: Remove unused CLK_ENABLE_ON_INIT
clk: renesas: r8a7740: Remove unused div4_clk.flags field
clk: renesas: r9a07g043: Add clock and reset entry for PLIC
clk: renesas: r8a779h0: Add INTC-EX clock
clk: renesas: r8a779h0: Add MSIOF clocks
clk: renesas: r8a779a0: Fix CANFD parent clock
clk: rs9: fix wrong default value for clock amplitude
clk: renesas: r8a779h0: Add timer clocks
clk: renesas: r8a779h0: Add SCIF clocks
clk: renesas: r9a07g044: Mark resets array as const
clk: renesas: r9a07g043: Mark mod_clks and resets arrays as const
clk: renesas: r8a779h0: Add thermal clock
dt-bindings: clock: r9a07g043-cpg: Annotate RZ/G2UL-only core clocks
* clk-scmi:
clk: scmi: Add support for get/set duty_cycle operations
clk: scmi: Add support for re-parenting restricted clocks
clk: scmi: Add support for rate change restricted clocks
clk: scmi: Add support for state control restricted clocks
clk: scmi: Allocate CLK operations dynamically
* clk-allwinner:
clk: sunxi-ng: fix module autoloading
clk: sunxi-ng: a64: Add constraints on PLL-MIPI's n/m ratio and parent rate
clk: sunxi-ng: nkm: Support constraints on m/n ratio and parent rate
|
|
'clk-loongson' into clk-next
- Airoha EN7581 SoC clk driver
- Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
- Loongson-2k0500 and Loongson-2k2000 SoC clk driver
* clk-cleanup:
clk: gemini: Remove an unused field in struct clk_gemini_pci
clk: highbank: Remove an unused field in struct hb_clk
clk: ti: dpll: fix incorrect #ifdef checks
clk: nxp: Remove an unused field in struct lpc18xx_pll
* clk-airoha:
clk: en7523: Add EN7581 support
clk: en7523: Add en_clk_soc_data data structure
dt-bindings: clock: airoha: add EN7581 binding
* clk-mediatek:
clk: mediatek: mt8365-mm: fix DPI0 parent
clk: mediatek: pllfh: Don't log error for missing fhctl node
* clk-sophgo:
clk: sophgo: avoid open-coded 64-bit division
clk: sophgo: Make synthesizer struct static
clk: sophgo: Add clock support for SG2000 SoC
clk: sophgo: Add clock support for CV1810 SoC
clk: sophgo: Add clock support for CV1800 SoC
dt-bindings: clock: sophgo: Add clock controller of SG2000 series SoC
* clk-loongson:
clk: clk-loongson2: Add Loongson-2K2000 clock support
dt-bindings: clock: loongson2: Add Loongson-2K2000 compatible
clk: clk-loongson2: Add Loongson-2K0500 clock support
dt-bindings: clock: loongson2: Add Loongson-2K0500 compatible
clk: clk-loongson2: Refactor driver for adding new platforms
dt-bindings: clock: Add Loongson-2K expand clock index
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-05-17
We've added 7 non-merge commits during the last 2 day(s) which contain
a total of 8 files changed, 20 insertions(+), 9 deletions(-).
The main changes are:
1) Fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup and add
BPF selftests to cover this case, from Andrii Nakryiko.
(Report https://lore.kernel.org/bpf/[email protected]/)
2) Fix two BPF selftests to adjust for kernel changes after fast-forwarding
Linus' tree to make BPF CI all green again, from Martin KaFai Lau.
3) Fix libbpf feature detectors when using token_fd by adjusting the
attribute size for memset to cover the former, also from Andrii Nakryiko.
4) Fix the description of 'src' in ALU instructions for the BPF ISA
standardization doc, from Puranjay Mohan.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations
selftests/bpf: Adjust test_access_variable_array after a kernel function name change
selftests/bpf: add more variations of map-in-map situations
bpf: save extended inner map info for percpu array maps as well
MAINTAINERS: Update ARM64 BPF JIT maintainer
bpf, docs: Fix the description of 'src' in ALU instructions
libbpf: fix feature detectors when using token_fd
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The btf_dump test fails:
test_btf_dump_struct_data:FAIL:file_operations unexpected file_operations: actual '(struct file_operations){
.owner = (struct module *)0xffffffffffffffff,
.fop_flags = (fop_flags_t)4294967295,
.llseek = (loff_t (*)(struct f' != expected '(struct file_operations){
.owner = (struct module *)0xffffffffffffffff,
.llseek = (loff_t (*)(struct file *, loff_t, int))0xffffffffffffffff,'
The "fop_flags" is a recent addition to the struct file_operations in
commit 210a03c9d51a ("fs: claw back a few FMODE_* bits")
This patch changes the test_btf_dump_struct_data() to reflect
this change.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Reviewed-by: Alan Maguire <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
name change
After commit 4c3e509ea9f2 ("sched/balancing: Rename load_balance() => sched_balance_rq()"),
the load_balance kernel function is renamed to sched_balance_rq.
This patch adjusts the fentry program in test_access_variable_array.c
to reflect this kernel function name change.
Signed-off-by: Martin KaFai Lau <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Daniel Borkmann <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
- Constify pcibus_class (Heiner Kallweit)
- Annotate pci_cache_line_size variables as __ro_after_init (Heiner
Kallweit)
- Clean up formatting of PCI accessor macros (Ilpo Järvinen)
- Remove some OLPC dead code (Kunwu Chan)
- Make pcie_bandwidth_capable() static (Ilpo Järvinen)
* pci/misc:
PCI: Make pcie_bandwidth_capable() static
x86/pci: Remove OLPC dead code
PCI: Clean up accessor macro formatting
PCI/ERR: Cleanup misleading indentation inside if conditions
PCI: Annotate pci_cache_line_size variables as __ro_after_init
PCI: Constify pcibus_class
|
|
- Remove unused Interrupt Message Store (IMS) support (Bjorn Helgaas)
* pci/ims-removal:
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
Revert "PCI/MSI: Provide pci_ims_alloc/free_irq()"
Revert "PCI/MSI: Provide stubs for IMS functions"
|
|
- Simplify pci_epf_test_alloc_space() by using pci_epc_get_next_free_bar()
as other similar iterators do (Niklas Cassel)
- Configure endpoint BARs as 64-bit if that's all the hardware supports, in
addition to doing it if the BAR size is larger than 2GB (Niklas Cassel)
- Remove superfluous pci_epf_configure_bar(), since pci_epf_alloc_space()
now contains that functionality (Niklas Cassel)
- Simplify pci_epf_test_set_bar() (Niklas Cassel)
- Clean up pci_epf_test_unbind() to reduce indentation level (Niklas
Cassel)
* pci/endpoint:
PCI: endpoint: pci-epf-test: Clean up pci_epf_test_unbind()
PCI: endpoint: pci-epf-test: Simplify pci_epf_test_set_bar() loop
PCI: endpoint: pci-epf-test: Remove superfluous code
PCI: endpoint: Allocate a 64-bit BAR if that is the only option
PCI: endpoint: pci-epf-test: Simplify pci_epf_test_alloc_space() loop
|
|
- Return success from endpoint probe before incorrectly dropping the
reference to the BPMP (Vidya Sagar)
* pci/controller/tegra194:
PCI: tegra194: Fix probe path for Endpoint mode
|
|
- Configure endpoint BAR to be 64-bit if the PCI_BASE_ADDRESS_MEM_TYPE_64
flag is set instead of depending on the new BAR value itself (Niklas
Cassel)
- Set Subsystem Vendor ID correctly (Rick Wertenbroek)
* pci/controller/rockchip:
PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id
PCI: rockchip-ep: Set a 64-bit BAR if requested
|
|
- Enlarge PHY name buffer to avoid snprintf() overflow (Sergio Paracuellos)
* pci/controller/mt7621:
PCI: mt7621: Fix string truncation in mt7621_pcie_parse_port()
|
|
- Move DBI accesses from dw_pcie_ep_init() to dw_pcie_ep_init_complete() so
drivers for endpoints that require Refclk for DBI access, e.g., qcom and
tegra194, can control when this happens (Manivannan Sadhasivam)
- Add endpoint API kernel-doc (Manivannan Sadhasivam)
- Remove .deinit() callback and instead call rcar_gen4_pcie_ep_deinit()
explicitly from rcar-gen4, which was the only user (Manivannan
Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to correspond with
dw_pcie_ep_init() (Manivannan Sadhasivam)
- Add dw_pcie_ep_cleanup() for drivers that need to clean up eDMA resources
when PERST# is asserted, e.g., qcom, tegra194 (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
better reflect the functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from drivers instead of from
dw_pcie_ep_init() so drivers, e.g., qcom and tegra194, can do it when
Refclk is available (Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which previously identified drivers
that required Refclk before DBI access, because it's now unnecessary
(Manivannan Sadhasivam)
* pci/controller/dwc:
PCI: endpoint: Remove "core_init_notifier" flag
PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
PCI: dwc: ep: Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers()
PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#
PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit()
PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops
PCI: dwc: ep: Add Kernel-doc comments for APIs
PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host
|
|
- Configure endpoint BAR to be 64-bit if the PCI_BASE_ADDRESS_MEM_TYPE_64
flag is set instead of depending on the new BAR value itself (Niklas
Cassel)
* pci/controller/cadence:
PCI: cadence: Set a 64-bit BAR if requested
|
|
- Add rcar-pci-host missing IOMMU properties (Geert Uytterhoeven)
- Add ti,j721e-pci-host J784S4 Device ID (Siddharth Vadapalli)
- Add ti,j721e-pci-host J722S compatible string (Siddharth Vadapalli)
- Add ti,am65 num-viewport, phys, and phy-name properties (Jan Kiszka)
- Drop cdns,cdns-pcie-host redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)
- Add mediatek,mt7621 missing reg property for child Root Ports (Krzysztof
Kozlowski)
- Switch bindings from pci-bus.yaml to pci-host-bridge.yaml (Krzysztof
Kozlowski)
- Convert fsl,layerscape host and endpoint bindings to YAML (Frank Li)
- Add rcar-gen4-pci-host R-Car V4H (R8A779G0) compatible strings for both
host and endpoint mode (Yoshihiro Shimoda)
- Add rockchip,rk3399-pcie maxItems for ep-gpios (Krzysztof Kozlowski)
* pci/dt-bindings:
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4H compatible
dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4H compatible
dt-bindings: PCI: layerscape-pci: Convert to YAML format
dt-bindings: PCI: mediatek,mt7621-pcie: Switch from deprecated pci-bus.yaml
dt-bindings: PCI: host-bridges: Switch from deprecated pci-bus.yaml
dt-bindings: PCI: mediatek,mt7621: Add missing child node reg
dt-bindings: PCI: cdns,cdns-pcie-host: Drop redundant msi-parent and pci-bus.yaml
dt-bindings: PCI: ti,am65: Fix remaining binding warnings
dt-bindings: PCI: ti,j721e-pci-host: Add support for J722S SoC
dt-bindings: PCI: rcar-pci-host: Add missing IOMMU properties
dt-bindings: PCI: ti,j721e-pci-host: Add device-id for TI's J784S4 SoC
|
|
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports because we can't get
them back out of D3cold (Mario Limonciello)
* pci/pm:
PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports
|
|
- Check for kcalloc() failure and handle it gracefully (Duoming Zhou)
* pci/of:
PCI: of_property: Return error for int_map allocation failure
|
|
- Update coding style to "mainline is normal path, errors are the
exceptions" (Andy Shevchenko)
* pci/msi:
PCI/MSI: Make error path handling follow the standard pattern
|
|
- Update hotplug TODO notes (Nam Cao)
* pci/hotplug:
PCI: hotplug: Remove obsolete sgi_hotplug TODO notes
PCI: hotplug: Document unchecked return value of pci_hp_add_bridge()
|
|
- Clear bridge Secondary Status errors after enumeration since enumeration
causes many errors (Vidya Sagar)
- Wait for Link Training==0 before starting Link retrain to avoid a race;
this was done previously but broken by a faulty merge (Ilpo Järvinen)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific about what
"LEGACY" means (Damien Le Moal)
- Update return types of pci_find_capability() stubs to match the extern
declarations for the actual implementations (Bjorn Helgaas)
- Drop unnecessary pci_enable_device_io() from pata_cs5520 (Heiner
Kallweit)
- Drop unused pci_enable_device_io() (Heiner Kallweit)
- On 2016 and newer BIOSes, skip early E820 check for ECAM regions
described in ACPI MCFG; there's no spec requirement for E820
reservations, and some machines don't provide them (Bjorn Helgaas)
- If devices were disconnected while suspended, don't wait for them when
resuming (Ilpo Järvinen)
* pci/enumeration:
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: ath10k: Refer to INTX instead of LEGACY
net: wangxun: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use
RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI: Clarify intent of LT wait
PCI: Wait for Link Training==0 before starting Link retrain
PCI: Clear Secondary Status errors after enumeration
|
|
- Specify Revision 6 of the "Enable DPC" _DSM function to match the
implementation (Kuppuswamy Sathyanarayanan)
- Check for failure of the "Locate Port" _DSM function (Kuppuswamy
Sathyanarayanan)
* pci/edr:
PCI/EDR: Align EDR_PORT_LOCATE_DSM with PCI Firmware r3.3
PCI/EDR: Align EDR_PORT_DPC_ENABLE_DSM with PCI Firmware r3.3
|
|
- Add support for DOE Discovery version 2 (Alexey Kardashevskiy)
* pci/doe:
PCI/DOE: Support discovery version 2
|
|
- Lock the upstream bridge while using it to perform a Secondary Bus Reset
(Dave Jiang)
- Return failure when attempting Secondary Bus Reset below a CXL Port that
has SBR masked (Dave Jiang)
- Add a "cxl_bus" reset method that temporarily unmasks SBR (Dave Jiang)
- Add a warning if we reset a CXL type 3 memory device that was in use
while being reset (Dave Jiang)
* pci/cxl:
cxl: Add post-reset warning if reset results in loss of previously committed HDM decoders
PCI/CXL: Add 'cxl_bus' reset method for devices below CXL Ports
PCI/CXL: Fail bus reset if upstream CXL Port has SBR masked
PCI: Lock upstream bridge for pci_reset_function()
PCI/CXL: Move CXL Vendor ID to pci_ids.h
|
|
- Consolidate #defines for link states (L0s, L1, L1.1, etc) to simplify
ASPM implementation (Ilpo Järvinen)
- Simplify ASPM disable/enable mask calculation (Ilpo Järvinen)
* pci/aspm:
PCI/ASPM: Clean up ASPM disable/enable mask calculation
PCI/ASPM: Consolidate link state defines
|
|
- Mask reporting of Mask Replay Timer Timeout Correctable Errors in the
bridge above Genesys GL975x SD host controllers; the errors are caused by
a GL975x hardware defect and they may lead to AER interrupts that prevent
system suspend (Kai-Heng Feng)
- Update URL of aer-inject tool (Kuppuswamy Sathyanarayanan)
* pci/aer:
PCI/AER: Update aer-inject tool source URL
PCI: Mask Replay Timer Timeout errors for Genesys GL975x SD host controller
|
|
On runtime resume, pci_dev_wait() is called:
pci_pm_runtime_resume()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
pci_dev_wait()
While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.
Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.
Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.
The use cases of pci_dev_wait() boil down to two:
1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()
The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.
Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.
Link: https://lore.kernel.org/r/[email protected]
Reported-by: Mika Westerberg <[email protected]>
Tested-by: Mika Westerberg <[email protected]>
Signed-off-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
Arul, Mateusz, Imcarneiro91, and Aman reported a regression caused by
07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map"). On the
Lenovo Legion 9i laptop, that commit removes the ECAM area from E820, which
means the early E820 validation fails, which means we don't enable ECAM in
the "early MCFG" path.
The static MCFG table describes ECAM without depending on the ACPI
interpreter. Many Legion 9i ACPI methods rely on that, so they fail when
PCI config access isn't available, resulting in the embedded controller,
PS/2, audio, trackpad, and battery devices not being detected. The _OSC
method also fails, so Linux can't take control of the PCIe hotplug, PME,
and AER features:
# pci_mmcfg_early_init()
PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0]
PCI: not using ECAM ([mem 0xc0000000-0xce0fffff] not reserved)
ACPI Error: AE_ERROR, Returned by Handler for [PCI_Config] (20230628/evregion-300)
ACPI: Interpreter enabled
ACPI: Ignoring error and continuing table load
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.RP01._SB.PC00], AE_NOT_FOUND (20230628/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.RP01._SB.PC00], AE_NOT_FOUND (20230628/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
...
ACPI Error: Aborting method \_SB.PC00._OSC due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
# pci_mmcfg_late_init()
PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0]
PCI: [Firmware Info]: ECAM [mem 0xc0000000-0xce0fffff] not reserved in ACPI motherboard resources
PCI: ECAM [mem 0xc0000000-0xce0fffff] is EfiMemoryMappedIO; assuming valid
PCI: ECAM [mem 0xc0000000-0xce0fffff] reserved to work around lack of ACPI motherboard _CRS
Per PCI Firmware r3.3, sec 4.1.2, ECAM space must be reserved by a PNP0C02
resource, but there's no requirement to mention it in E820, so we shouldn't
look at E820 to validate the ECAM space described by MCFG.
In 2006, 946f2ee5c731 ("[PATCH] i386/x86-64: Check that MCFG points to an
e820 reserved area") added a sanity check of E820 to work around buggy MCFG
tables, but that over-aggressive validation causes failures like this one.
Keep the E820 validation check for machines older than 2016, an arbitrary
ten years after 946f2ee5c731, so machines that depend on it don't break.
Skip the early E820 check for 2016 and newer BIOSes since there's no
requirement to describe ECAM in E820.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 07eab0901ede ("efi/x86: Remove EfiMemoryMappedIO from E820 map")
Reported-by: Mateusz Kaduk <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218444
Signed-off-by: Bjorn Helgaas <[email protected]>
Tested-by: Mateusz Kaduk <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]>
Cc: [email protected]
|
|
After the last user was removed, remove this PCI core function. It's very
unlikely that we'll see a new device requiring io space access, even though
memory space access is supported.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
|
|
A few lines earlier pcim_enable_device() is called, which includes the
functionality of pci_enable_device_io(). Therefore we can safely remove the
call to pci_enable_device_io().
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Acked-by: Damien Le Moal <[email protected]>
|
|
f646c2a0a668 ("PCI: Return u8 from pci_find_capability() and similar") and
ee8b1c478a9f ("PCI: Return u16 from pci_find_ext_capability() and similar")
updated the return type of the extern declarations, but neglected to update
the type of the stubs used when CONFIG_PCI is not enabled.
Update them to match the extern declarations.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Kuppuswamy Sathyanarayanan <[email protected]>
|
|
Replace the last references to PCI_IRQ_LEGACY with PCI_IRQ_INTX in pci.h
header file. With this change, PCI_IRQ_LEGACY is unused and we can remove
its definition.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
In pvscsi_probe(), initialize irq_flag using PCI_IRQ_ALL_TYPES to remove
the use of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
|
|
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
|
|
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
|
|
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
|
|
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
|
|
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
|
|
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
|
|
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Damien Le Moal <[email protected]>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
The custom EC address space handler in the WMI driver was only needed
because the EC driver did not install its address space handler for
EC operation regions beyond the EC device scope in the ACPI namespace.
That has just changed, so the custom EC address handler is not needed
any more and it can be removed.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Armin Wolf <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
|
|
It is reported that _DSM evaluation fails in ucsi_acpi_dsm() on Lenovo
IdeaPad Pro 5 due to a missing address space handler for the EC address
space:
ACPI Error: No handler for Region [ECSI] (000000007b8176ee) [EmbeddedControl] (20230628/evregion-130)
This happens because if there is no ECDT, the EC driver only registers
the EC address space handler for operation regions defined in the EC
device scope of the ACPI namespace while the operation region being
accessed by the _DSM in question is located beyond that scope.
To address this, modify the ACPI EC driver to install the EC address
space handler at the root of the ACPI namespace for the first EC that
can be found regardless of whether or not an ECDT is present.
Note that this change is consistent with some examples in the ACPI
specification in which EC operation regions located outside the EC
device scope are used (for example, see Section 9.17.15 in ACPI 6.5),
so the current behavior of the EC driver is arguably questionable.
Reported-by: webcaptcha <[email protected]>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218789
Link: https://uefi.org/specs/ACPI/6.5/09_ACPI_Defined_Devices_and_Device_Specific_Objects.html#example-asl-code
Link: https://lore.kernel.org/linux-acpi/[email protected]
Suggested-by: Heikki Krogerus <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Reviewed-by: Mario Limonciello <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- Simon Glass wanted to support binman's output properties in order
to check their validity using the binding checks and proposed
changes with the missing properties as well as a binman compatible.
- Krzysztof Kozlowski on his side shared a new yaml for describing
Samsung's OneNAND interface.
- The interface with NVMEM has also been slightly improved/fixed,
especially now that OTP are also supported in the NAND subsystem.
- Along with these changes, small cleanups have also been contributed
around ID tables, structure sizes, arithmetic checks and comments.
Raw NAND subsystem:
- Two small fixes, one in the Hynix vendor code for properly
returning an error which might have been ignored and another in the
Davinci driver to properly synchronize the controller with the gpio
domain.
SPI NOR subsystem:
- SPI NOR now uses div_u64() instead of div64_u64() in places where
the divisor is 32 bits. Many 32 bit architectures can optimize this
variant better than a full 64 bit divide"
* tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: replace unnecessary div64_u64() with div_u64()
mtd: mchp23k256: drop unneeded MODULE_ALIAS
dt-bindings: mtd: fixed-partition: Add binman compatibles
dt-bindings: mtd: fixed-partitions: Add alignment properties
mtd: maps: sa1100-flash: Prefer struct_size over open coded arithmetic
mtd: core: Align comment with an action in mtd_otp_nvmem_add()
mtd: rawnand: hynix: fixed typo
mtd: rawnand: davinci: Add dummy read after sending command
mtd: partitions: redboot: Added conversion of operands to a larger type
dt-bindings: mtd: Add Samsung S5Pv210 OneNAND
mtd: core: Don't fail mtd_otp_nvmem_add() if OTP is unsupported
mtd: core: Report error if first mtd_otp_size() call fails in mtd_otp_nvmem_add()
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Increase the timeout period of the ACMD41 command
- Add card entry for quirks to debugfs
- Add mmc_gpiod_set_cd_config() function
- Store owner from SDIO modules with sdio_register_driver()
MMC host:
- atmel-mci: Some cleanups and a switch to use dev_err_probe()
- renesas_sdhi:
- Add support for RZ/G2L, RZ/G3S and RZ/V2M variants
- Set the SDBUF after reset
- sdhci: Add support for "Tuning Error" interrupts
- sdhci-acpi:
- Add quirk to enable pull-up on the card-detect GPIO on Asus
T100TA
- Disable write protect detection on Toshiba WT10-A
- Fix Lenovo Yoga Tablet 2 Pro 1380 sdcard slot not working
- sdhci_am654:
- Re-work and fix the tuning support for multiple speed-modes
- Add tuning algorithm for delay chain
- sdhci-esdhc-imx: Add NXP S32G3 support
- sdhci-of-dwcmshc:
- Add tuning support for Sophgo CV1800B and SG200X
- Implement SDHCI CQE support
- sdhci-pci-gli: Use the proper pci_set_power_state() instead of
PMCSR writes"
MEMSTICK:
- Convert a couple of drivers to use the ->remove_new() callback"
* tag 'mmc-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and RZ/V2M SoCs
dt-bindings: mmc: renesas,sdhi: Document RZ/G2L family compatibility
dt-bindings: mmc: renesas,sdhi: Group single const value items into an enum list
mmc: renesas_sdhi: Set the SDBUF after reset
mmc: core: Increase the timeout period of the ACMD41 command
mmc: core: Convert to use __mmc_poll_for_busy() SD_APP_OP_COND too
mmc: atmel-mci: Switch to use dev_err_probe()
mmc: atmel-mci: Incapsulate used to be a platform data into host structure
mmc: atmel-mci: Replace platform device pointer by generic one
mmc: atmel-mci: Use temporary variable for struct device
mmc: atmel-mci: Get rid of platform data leftovers
mmc: sdhci-of-dwcmshc: Add tuning support for Sophgo CV1800B and SG200X
mmc: sdhci-of-dwcmshc: Remove useless "&" of th1520_execute_tuning
mmc: sdhci-s3c: Choose sdhci_ops based on variant
mmc: sdhci_am654: Constify struct sdhci_ops
mmc: sdhci-sprd: Constify struct sdhci_ops
mmc: sdhci-omap: Constify struct sdhci_ops
mmc: sdhci-esdhc-mcf: Constify struct sdhci_ops
mmc: slot-gpio: Use irq_handler_t type
mmc: sdhci-acpi: Add quirk to enable pull-up on the card-detect GPIO on Asus T100TA
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Don't clear suspended_count at genpd_prepare()
- Update the rejected/usage counters at system suspend too
pmdomain providers:
- ti-sci: Fix duplicate PD referrals
- mediatek: Add MT8188 buck isolation setting
- renesas: Add R-Car M3-W power-off delay quirk
- renesas: Split R-Car M3-W and M3-W+ sub-drivers
cpuidle-psci:
- Update MAINTAINERS to set a git for DT IDLE PM DOMAIN/ARM PSCI PM
DOMAIN
- Update init level to core_initcall()
- Drop superfluous wrappers psci_dt_attach|detach_cpu()"
* tag 'pmdomain-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: ti-sci: Fix duplicate PD referrals
pmdomain: core: Don't clear suspended_count at genpd_prepare()
pmdomain: core: Update the rejected/usage counters at system suspend too
pmdomain: renesas: rcar-sysc: Add R-Car M3-W power-off delay quirk
pmdomain: renesas: rcar-sysc: Remove rcar_sysc_nullify() helper
pmdomain: renesas: rcar-sysc: Split R-Car M3-W and M3-W+ sub-drivers
pmdomain: renesas: rcar-sysc: Absorb rcar_sysc_ch into rcar_sysc_pd
MAINTAINERS: Add a git for the DT IDLE PM DOMAIN
MAINTAINERS: Add a git for the ARM PSCI PM DOMAIN
cpuidle: psci: Update init level to core_initcall()
cpuidle: psci: Drop superfluous wrappers psci_dt_attach|detach_cpu()
pmdomain: mediatek: Add MT8188 buck isolation setting
pmdomain: mediatek: scpsys: drop driver owner assignment
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New V4L2 ioctl VIDIOC_REMOVE_BUFS
- experimental support for using generic metaformats on V4L2 core
- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x
- More cleanups at atomisp driver
- Usual bunch of driver cleanups, improvements and fixes
* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...
|
|
Pull drm fix from Dave Airlie:
- fix breakage in buddy allocator
* tag 'drm-next-2024-05-16' of https://gitlab.freedesktop.org/drm/kernel:
drm/tests: Add a unit test for range bias allocation
drm/buddy: Fix the range bias clear memory allocation issue
|
|
Move -t, --trace from common_options.rst to
common_osnoise_options.rst and
common_timerlat_options.rst
so that it will appear in the man pages
rtla-timerlat-hist.1
rtla-timerlat-top.1
rtla-osnoise-hist.1
rtla-osnoise-top.1
Remove the equals ('=') sign and add a space.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Daniel Bristot de Oliveria <[email protected]>
Signed-off-by: John Kacur <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|
|
The -t option has an optional argument.
The usual case is for a short option to be specified without an '='
and for the long version to be specified with an '='
Various forms of this do not work as expected.
For example:
rtla timerlat hist -T50 -tfile.txt
will result in a truncated file name of "ile.txt"
Another example is that the long form without the '=' will result in the
default file name instead of the requested file name.
This patch properly parses the optional argument with and without '='
and with and without spaces for the short form.
This patch was also tested using -t and --trace without providing a file
name both as the last requested option and with a following long and
short option.
For example:
rtla timerlat hist -T50 -t -u
rtla timerlat hist -T50 --trace -u
This fix is applied to both timerlat top and hist
and to osnoise top and hist.
Here is the full testing for rtla timerlat hist.
Before applying the patch
rtla timerlat hist -T50 -t=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -tfile.txt
Truncated file name "ile.txt"
rtla timerlat hist -T50 -t file.txt
Default file name instead of file.txt
rtla timerlat hist -T50 --trace=file.txt
Truncated file name "ile.txt"
rtla timerlat hist -T50 --trace file.txt
Default file name "timerlat_trace.txt" instead of "file.txt"
After applying the patch:
rtla timerlat hist -T50 -t=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -tfile.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 -t file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 --trace=file.txt
Works as expected, "file.txt"
rtla timerlat hist -T50 --trace file.txt
Works as expected, "file.txt"
In addition the following tests were performed to make sure that
the default file name worked as expected including with trailing
options.
rtla timerlat hist -T50 -t
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 --trace
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 -t -u
Works as expected "timerlat_trace.txt"
rtla timerlat hist -T50 --trace -u
Works as expected "timerlat_trace.txt"
Link: https://lkml.kernel.org/r/[email protected]
Cc: Daniel Bristot de Oliveria <[email protected]>
Signed-off-by: John Kacur <[email protected]>
Signed-off-by: Daniel Bristot de Oliveira <[email protected]>
|