aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-03-09x86, mm: unify exit paths in gup_pte_range()Dan Williams1-19/+20
All exit paths from gup_pte_range() require pte_unmap() of the original pte page before returning. Refactor the code to have a single exit point to do the unmap. This mirrors the flow of the generic gup_pte_range() in mm/gup.c. Link: http://lkml.kernel.org/r/148804251828.36605.14910389618497006945.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Ross Zwisler <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09x86, mm: fix gup_pte_range() vs DAX mappingsDan Williams1-2/+6
gup_pte_range() fails to check pte_allows_gup() before translating a DAX pte entry, pte_devmap(), to a page. This allows writes to read-only mappings, and bypasses the DAX cacheline dirty tracking due to missed 'mkwrite' faults. The gup_huge_pmd() path and the gup_huge_pud() path correctly check pte_allows_gup() before checking for _devmap() entries. Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Link: http://lkml.kernel.org/r/148804251312.36605.12665024794196605053.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Ross Zwisler <[email protected]> Signed-off-by: Dan Williams <[email protected]> Reported-by: Dave Hansen <[email protected]> Reported-by: Ross Zwisler <[email protected]> Cc: Xiong Zhou <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09power/mm: update pte_write and pte_wrprotect to handle savedwriteAneesh Kumar K.V3-7/+21
We use pte_write() to check whethwer the pte entry is writable. This is mostly used to later mark the pte read only if it is writable. The other use of pte_write() is to check whether the pte_entry is writable so that hardware page table entry can be marked accordingly. This is used in kvm where we look at qemu page table entry and update hardware hash page table for the guest with correct write enable bit. With the above, for the first usage we should also check the savedwrite bit so that we can correctly clear the savedwite bit. For the later, we add a new variant __pte_write(). With this we can revert write_protect_page part of 595cd8f256d2 ("mm/ksm: handle protnone saved writes when making page write protect"). But I left it as it is as an example code for savedwrite check. Fixes: c137a2757b886 ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write") Link: http://lkml.kernel.org/r/1488203787-17849-2-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Michael Ellerman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09powerpc/mm: handle protnone ptes on forkAneesh Kumar K.V1-31/+42
We need to mark pages of parent process read only on fork. Numa fault pte needs a protnone ptes variant with saved write flag set. On fork we need to make sure we remove the saved write bit. Instead of adding the protnone check in the caller update ptep_set_wrprotect variants to clear savedwrite bit. Without this we see random segfaults in application on fork. Fixes: c137a2757b886 ("powerpc/mm/autonuma: switch ppc64 to its own implementation of saved write") Link: http://lkml.kernel.org/r/1488203787-17849-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com Signed-off-by: Aneesh Kumar K.V <[email protected]> Cc: Rik van Riel <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Michael Ellerman <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09scripts/spelling.txt: add "overide" pattern and fix typo instancesMasahiro Yamada16-19/+18
Fix typos and add the following to the scripts/spelling.txt: overide||override While we are here, fix the doubled "address" in the touched line Documentation/devicetree/bindings/regulator/ti-abb-regulator.txt. Also, fix the comment block style in the touched hunks in drivers/media/dvb-frontends/drx39xyj/drx_driver.h. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09scripts/spelling.txt: add "disble(d)" pattern and fix typo instancesMasahiro Yamada17-18/+19
Fix typos and add the following to the scripts/spelling.txt: disble||disable disbled||disabled I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c untouched. The macro is not referenced at all, but this commit is touching only comment blocks just in case. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09userfaultfd: shmem: __do_fault requires VM_FAULT_NOPAGEAndrea Arcangeli1-1/+1
__do_fault assumes vmf->page has been initialized and is valid if VM_FAULT_NOPAGE is not returned by vma->vm_ops->fault(vma, vmf). handle_userfault() in turn should return VM_FAULT_NOPAGE if it doesn't return VM_FAULT_SIGBUS or VM_FAULT_RETRY (the other two possibilities). This VM_FAULT_NOPAGE case is only invoked when signal are pending and it didn't matter for anonymous memory before. It only started to matter since shmem was introduced. hugetlbfs also takes a different path and doesn't exercise __do_fault. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Andrea Arcangeli <[email protected]> Reported-by: Dmitry Vyukov <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09Merge tag 'pm-4.11-rc2' of ↵Linus Torvalds4-46/+44
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix several issues in the intel_pstate driver and one issue in the schedutil cpufreq governor, clean up that governor a bit and hook up existing code for disabling cpufreq to a new kernel command line option. Specifics: - Three fixes for intel_pstate problems related to the passive mode (in which it acts as a regular cpufreq scaling driver), two for the handling of global P-state limits and one for the handling of the cpu_frequency tracepoint in that mode (Rafael Wysocki). - Three fixes for the handling of P-state limits in intel_pstate in the active mode (Rafael Wysocki). - Introduction of a new cpufreq.off=1 kernel command line argument that will disable cpufreq entirely if passed to the kernel and is simply hooked up to the existing code used by Xen (Len Brown). - Fix for the schedutil cpufreq governor to prevent it from using stale raw frequency values in configurations with mutiple CPUs sharing one policy object and a cleanup for it reducing its overhead slightly (Viresh Kumar)" * tag 'pm-4.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy cpufreq: intel_pstate: Fix intel_pstate_verify_policy() cpufreq: intel_pstate: Fix global settings in active mode cpufreq: Add the "cpufreq.off=1" cmdline option cpufreq: schedutil: Pass sg_policy to get_next_freq() cpufreq: schedutil: move cached_raw_freq to struct sugov_policy cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy() cpufreq: intel_pstate: Do not use performance_limits in passive mode
2017-03-09Merge tag 'pci-v4.11-fixes-2' of ↵Linus Torvalds3-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: "PCI fixes: - fix NULL pointer dereference in Exynos driver - fix NULL pointer dereference in ASPM with pre-1.1 PCIe devices - blacklist QLogic ISP2722 to prevent panics while reading VPD" * tag 'pci-v4.11-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/ASPM: Always set link->downstream to avoid NULL dereference on remove PCI: Prevent VPD access for QLogic ISP2722 PCI: exynos: Initialize elbi_base even when using PHY framework
2017-03-09Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds12-132/+112
Pull block fixes from Jens Axboe: "Sending this a bit sooner than I otherwise would have, as a fix in the merge window had some unfortunate issues and side effects for some folks. This contains: - Fixes from Jan for the bdi registration/unregistration. These have been tested by the various parties reporting issues, and should be solid at this point. - Also from Jan, fix for axonram gendisk registration. - A stable fix for zram from Johannes. - A small series from Ming, fixing up some long standing issues with blk-mq hardware queue kobject initialization and registration. - A fix for sed opal from Jon, fixing a nonsensical range check and some set-but-not-used variables. - A fix from Neil for a long standing deadlock issue for stacking device drivers. With this in place, dm/md don't have to work around the issue anymore, and can be properly fixed up" * 'for-linus' of git://git.kernel.dk/linux-block: axonram: Fix gendisk handling blk: improve order of bio handling in generic_make_request() Revert "scsi, block: fix duplicate bdi name registration crashes" block: Make del_gendisk() safer for disks without queues bdi: Fix use-after-free in wb_congested_put() block: Allow bdi re-registration block/sed: Fix opal user range check and unused variables zram: set physical queue limits to avoid array out of bounds accesses blk-mq: free hctx->cpumask in release handler of hctx's kobject blk-mq: make lifetime consistent between hctx and its kobject blk-mq: make lifetime consitent between q/ctx and its kobject blk-mq: initialize mq kobjects in blk_mq_init_allocated_queue()
2017-03-09Merge tag 'media/v4.11-2' of ↵Linus Torvalds8-196/+260
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Media regression fixes: - serial_ir: fix a Kernel crash during boot on Kernel 4.11-rc1, due to an IRQ code called too early - other IR regression fixes at lirc and at the raw IR decoding - a deadlock fix at the RC nuvoton driver - fix another issue with DMA on stack at dw2102 driver There's an extra patch there that change a driver interface for the SoC VSP1 driver, with is shared between the DRM and V4L2 driver. The patch itself is trivial, and was acked by David Arlie" * tag 'media/v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] v4l: vsp1: Adapt vsp1_du_setup_lif() interface to use a structure [media] dw2102: don't do DMA on stack [media] rc: protocol is not set on register for raw IR devices [media] rc: raw decoder for keymap protocol is not loaded on register [media] rc: nuvoton: fix deadlock in nvt_write_wakeup_codes [media] lirc: fix dead lock between open and wakeup_filter [media] serial_ir: ensure we're ready to receive interrupts
2017-03-09s390: wire up statx system callHeiko Carstens3-1/+6
Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2017-03-09drm/amdgpu: bump driver version for some new featuresAlex Deucher1-1/+2
We added new gem ioctl flags and the new fences ioctl, but forgot to bump the version. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-03-09drm/amdgpu: validate paramaters in the gem ioctlAlex Deucher1-0/+21
Reject it if there are any invalid flags or domains. Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-03-09Merge branch 'bpf-htab-fixes'David S. Miller3-39/+99
Alexei Starovoitov says: ==================== bpf: htab fixes Two bpf hashtable fixes. See individual patches for details. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-03-09bpf: convert htab map to hlist_nullsAlexei Starovoitov3-34/+79
when all map elements are pre-allocated one cpu can delete and reuse htab_elem while another cpu is still walking the hlist. In such case the lookup may miss the element. Convert hlist to hlist_nulls to avoid such scenario. When bucket lock is taken there is no need to take such precautions, so only convert map_lookup and map_get_next to nulls. The race window is extremely small and only reproducible with explicit udelay() inside lookup_nulls_elem_raw() Similar to hlist add hlist_nulls_for_each_entry_safe() and hlist_nulls_entry_safe() helpers. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Reported-by: Jonathan Perry <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09bpf: fix struct htab_elem layoutAlexei Starovoitov1-5/+20
when htab_elem is removed from the bucket list the htab_elem.hash_node.next field should not be overridden too early otherwise we have a tiny race window between lookup and delete. The bug was discovered by manual code analysis and reproducible only with explicit udelay() in lookup_elem_raw(). Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Reported-by: Jonathan Perry <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09uapi: fix linux/packet_diag.h userspace compilation errorDmitry V. Levin1-1/+1
Replace MAX_ADDR_LEN with its numeric value to fix the following linux/packet_diag.h userspace compilation error: /usr/include/linux/packet_diag.h:67:17: error: 'MAX_ADDR_LEN' undeclared here (not in a function) __u8 pdmc_addr[MAX_ADDR_LEN]; This is not the first case in the UAPI where the numeric value of MAX_ADDR_LEN is used instead of symbolic one, uapi/linux/if_link.h already does the same: $ grep MAX_ADDR_LEN include/uapi/linux/if_link.h __u8 mac[32]; /* MAX_ADDR_LEN */ There are no UAPI headers besides these two that use MAX_ADDR_LEN. Signed-off-by: Dmitry V. Levin <[email protected]> Acked-by: Pavel Emelyanov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09net/tunnel: set inner protocol in network gro hooksPaolo Abeni2-2/+6
The gso code of several tunnels type (gre and udp tunnels) takes for granted that the skb->inner_protocol is properly initialized and drops the packet elsewhere. On the forwarding path no one is initializing such field, so gro encapsulated packets are dropped on forward. Since commit 38720352412a ("gre: Use inner_proto to obtain inner header protocol"), this can be reproduced when the encapsulated packets use gre as the tunneling protocol. The issue happens also with vxlan and geneve tunnels since commit 8bce6d7d0d1e ("udp: Generalize skb_udp_segment"), if the forwarding host's ingress nic has h/w offload for such tunnel and a vxlan/geneve device is configured on top of it, regardless of the configured peer address and vni. To address the issue, this change initialize the inner_protocol field for encapsulated packets in both ipv4 and ipv6 gro complete callbacks. Fixes: 38720352412a ("gre: Use inner_proto to obtain inner header protocol") Fixes: 8bce6d7d0d1e ("udp: Generalize skb_udp_segment") Signed-off-by: Paolo Abeni <[email protected]> Acked-by: Alexander Duyck <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09qed: Fix copy of uninitialized memory[email protected]1-1/+1
In qed_ll2_start_ooo() the ll2_info variable is uninitialized and then passed to qed_ll2_acquire_connection() where it is copied into a new memory space. This shouldn't cause any issue as long as non of the copied memory is every read. But the potential for a bug being introduced by reading this memory is real. Detected by CoverityScan, CID#1399632 ("Uninitialized scalar variable") Signed-off-by: Robert Foss <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09Merge branch 'thunderx-misc-fixes'David S. Miller6-61/+205
Sunil Goutham says: ==================== net: thunderx: Miscellaneous fixes This patch set fixes multiple issues such as IOMMU translation faults when kernel is booted with IOMMU enabled on host, incorrect MAC ID reading from ACPI tables and IPv6 UDP packet drop due to failure of checksum validation. Changes from v1: - As suggested by David Miller, got rid of conditional calling of DMA map/unmap APIs. Also updated commit message in 'IOMMU translation faults' patch. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-03-09net: thunderx: Allow IPv6 frames with zero UDP checksumThanneeru Srinivasulu1-2/+4
Do not consider IPv6 frames with zero UDP checksum as frames with bad checksum and drop them. Signed-off-by: Thanneeru Srinivasulu <[email protected]> Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09net: thunderx: Fix invalid mac addresses for node1 interfacesSunil Goutham2-14/+45
When booted with ACPI, random mac addresses are being assigned to node1 interfaces due to mismatch of bgx_id in BGX driver and ACPI tables. This patch fixes this issue by setting maximum BGX devices per node based on platform/soc instead of a macro. This change will set the bgx_id appropriately. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09net: thunderx: Fix LMAC mode debug prints for QSGMII modeSunil Goutham1-6/+0
When BGX/LMACs are in QSGMII mode, for some LMACs, mode info is not being printed. This patch will fix that. With changes already done to not do any sort of serdes 2 lane mapping config calculation in kernel driver, we can get rid of this logic. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09net: thunderx: Fix IOMMU translation faultsSunil Goutham4-39/+156
ACPI support has been added to ARM IOMMU driver in 4.10 kernel and that has resulted in VNIC interfaces throwing translation faults when kernel is booted with ACPI as driver was not using DMA API. This patch fixes the issue by using DMA API which inturn will create translation tables when IOMMU is enabled. Also VNIC doesn't have a seperate receive buffer ring per receive queue, so there is no 1:1 descriptor index matching between CQE_RX and the index in buffer ring from where a buffer has been used for DMA'ing. Unlike other NICs, here it's not possible to maintain dma address to virt address mappings within the driver. This leaves us no other choice but to use IOMMU's IOVA address conversion API to get buffer's virtual address which can be given to network stack for processing. Signed-off-by: Sunil Goutham <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09rds: ib: add error handleZhu Yanjun1-11/+36
In the function rds_ib_setup_qp, the error handle is missing. When some error occurs, it is possible that memory leak occurs. As such, error handle is added. Cc: Joe Jin <[email protected]> Reviewed-by: Junxiao Bi <[email protected]> Reviewed-by: Guanglei Li <[email protected]> Signed-off-by: Zhu Yanjun <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09liquidio: improve UDP TX performanceVSR Burru7-182/+144
Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: Derek Chickles <[email protected]> Signed-off-by: Raghu Vatsavayi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09net: ipv6: Remove redundant RTA_OIF in multipath routesDavid Ahern1-5/+6
Dinesh reported that RTA_MULTIPATH nexthops are 8-bytes larger with IPv6 than IPv4. The recent refactoring for multipath support in netlink messages does discriminate between non-multipath which needs the OIF and multipath which adds a rtnexthop struct for each hop making the RTA_OIF attribute redundant. Resolve by adding a flag to the info function to skip the oif for multipath. Fixes: beb1afac518d ("net: ipv6: Add support to dump multipath routes via RTA_MULTIPATH attribute") Reported-by: Dinesh Dutt <[email protected]> Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-09Merge tag 'for-linus-4.11-rc1-tag' of ↵Linus Torvalds2-17/+7
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix and cleanup from Juergen Gross: "This contains one fix for MSIX handling under Xen and a trivial cleanup patch" * tag 'for-linus-4.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xenbus: Remove duplicate inclusion of linux/init.h xen: do not re-use pirq number cached in pci device msi msg data
2017-03-09mm: introduce __p4d_alloc()Kirill A. Shutemov1-0/+23
For full 5-level paging we need a helper to allocate p4d page table. Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09mm: convert generic code to 5-level pagingKirill A. Shutemov23-120/+595
Convert all non-architecture-specific code to 5-level paging. It's mostly mechanical adding handling one more page table level in places where we deal with pud_t. Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09asm-generic: introduce <asm-generic/pgtable-nop4d.h>Kirill A. Shutemov3-24/+89
Like with pgtable-nopud.h for 4-level paging, this new header is base for converting an architectures to properly folded p4d_t level. Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09arch, mm: convert all architectures to use 5level-fixup.hKirill A. Shutemov34-1/+46
If an architecture uses 4level-fixup.h we don't need to do anything as it includes 5level-fixup.h. If an architecture uses pgtable-nop*d.h, define __ARCH_USE_5LEVEL_HACK before inclusion of the header. It makes asm-generic code to use 5level-fixup.h. If an architecture has 4-level paging or folds levels on its own, include 5level-fixup.h directly. Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09asm-generic: introduce __ARCH_USE_5LEVEL_HACKKirill A. Shutemov2-0/+67
We are going to introduce <asm-generic/pgtable-nop4d.h> to provide abstraction for properly (in opposite to 5level-fixup.h hack) folded p4d level. The new header will be included from pgtable-nopud.h. If an architecture uses <asm-generic/nop*d.h>, we cannot use 5level-fixup.h directly to quickly convert the architecture to 5-level paging as it would conflict with pgtable-nop4d.h. With this patch an architecture can define __ARCH_USE_5LEVEL_HACK before inclusion <asm-genenric/nop*d.h> to use 5level-fixup.h. Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09asm-generic: introduce 5level-fixup.hKirill A. Shutemov3-1/+46
We are going to switch core MM to 5-level paging abstraction. This is preparation step which adds <asm-generic/5level-fixup.h> As with 4level-fixup.h, the new header allows quickly make all architectures compatible with 5-level paging in core MM. In long run we would like to switch architectures to properly folded p4d level by using <asm-generic/pgtable-nop4d.h>, but it requires more changes to arch-specific code. Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09x86/cpufeature: Add 5-level paging detectionKirill A. Shutemov1-1/+2
Look for 'la57' in /proc/cpuinfo to see if your machine supports 5-level paging. Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Michal Hocko <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2017-03-09usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllersGuenter Roeck1-0/+2
Upstream commit 98d74f9ceaef ("xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers") fixes a problem with hot pluggable PCI xhci controllers which can result in excessive timeouts, to the point where the system reports a deadlock. The same problem is seen with hot pluggable xhci controllers using the xhci-plat driver, such as the driver used for Type-C ports on rk3399. Similar to hot-pluggable PCI controllers, the driver for this chip removes the xhci controller from the system when the Type-C cable is disconnected. The solution for PCI devices works just as well for non-PCI devices and avoids the problem. Signed-off-by: Guenter Roeck <[email protected]> Cc: stable <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-03-09usb: host: xhci-dbg: HCIVERSION should be a binary numberPeter Chen1-1/+1
According to xHCI spec, HCIVERSION containing a BCD encoding of the xHCI specification revision number, 0100h corresponds to xHCI version 1.0. Change "100" as "0x100". Cc: Lu Baolu <[email protected]> Cc: stable <[email protected]> Fixes: 04abb6de2825 ("xhci: Read and parse new xhci 1.1 capability register") Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-03-09usb: xhci: remove dummy extra_priv_size for size of xhci_hcd structChunfeng Yun2-2/+0
because hcd_priv_size is already size of xhci_hcd struct, extra_priv_size is not needed anymore for MTK and tegra drivers. Signed-off-by: Chunfeng Yun <[email protected]> Tested-by: Thierry Reding <[email protected]> Acked-by: Thierry Reding <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-03-09usb: xhci-mtk: check hcc_params after adding primary hcdChunfeng Yun1-3/+3
hcc_params is set in xhci_gen_setup() called from usb_add_hcd(), so checks the Maximum Primary Stream Array Size in the hcc_params register after adding primary hcd. Signed-off-by: Chunfeng Yun <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-03-09ahci: qoriq: correct the sata ecc setting errorYuantian Tang1-2/+4
Sata ecc is controlled by only 1 bit which is 24bit in big-endian in ecc register. So only setting 24bit to disable sata ecc prevents other bits from being overwritten in ecc register. Signed-off-by: Tang Yuantian <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2017-03-09Revert "i2c: copy device properties when using i2c_register_board_info()"Wolfram Sang1-10/+0
This reverts commit b0c1e95ab44feaad8831f2c06a3473c974003b49. It contains a flaw and the next version has more features added which makes me want to move it to the next cycle. Signed-off-by: Wolfram Sang <[email protected]>
2017-03-09Merge branch 'i2c-mux/for-current' of https://github.com/peda-r/i2c-mux into ↵Wolfram Sang1-0/+2
i2c/for-current
2017-03-09Revert "i2c: add missing of_node_put in i2c_mux_del_adapters"Wolfram Sang1-2/+0
This reverts commit 02dbfa5e5583523035f05636c614a0eca77f1aab. I grabbed the wrong version from the list and will pull the proper one from Peter Rosin's mux tree. Signed-off-by: Wolfram Sang <[email protected]>
2017-03-09i2c: exynos5: Avoid transaction timeouts due TRANSFER_DONE_AUTO not setJavier Martinez Canillas1-1/+2
After commit 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling"), some I2C transactions are failing because the TRANSFER_DONE_AUTO field is not set in the I2C_TRANS_STATUS register so the i2c->status value is left to -EINVAL causing the i2c->msg_complete completion to never be signaled. For example, when reading the time of an I2C rtc on an Exynos5800 machine: $ cat /sys/class/rtc/rtc0/time [ 25.924594] exynos5-hsi2c 12e10000.i2c: rx timeout [ 65.028365] max77686-rtc max77802-rtc: Fail to read time reg(-22) cat: /sys/class/rtc/rtc0/time: Invalid argument The Exynos5422 manual states clearly that most I2C_TRANS_STATUS reg bits (including TRANSFER_DONE_AUTO) are cleared after the register is read. So reading has side effects and should only be done if HSI2C_INT_I2C was set. Fixes: 7999eecb7e56 ("i2c: exynos5: fix arbitration lost handling") Signed-off-by: Javier Martinez Canillas <[email protected]> Reviewed-by: Andrzej Hajda <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2017-03-09Merge tag 'kvm-arm-for-4.11-rc2' of ↵Radim Krčmář12-79/+183
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm KVM/ARM updates for v4.11-rc2 vgic updates: - Honour disabling the ITS - Don't deadlock when deactivating own interrupts via MMIO - Correctly expose the lact of IRQ/FIQ bypass on GICv3 I/O virtualization: - Make KVM_CAP_NR_MEMSLOTS big enough for large guests with many PCIe devices General bug fixes: - Gracefully handle exception generated with syndroms that the host doesn't understand - Properly invalidate TLBs on VHE systems
2017-03-09KVM: nVMX: do not warn when MSR bitmap address is not backedRadim Krčmář1-3/+1
Before trying to do nested_get_page() in nested_vmx_merge_msr_bitmap(), we have already checked that the MSR bitmap address is valid (4k aligned and within physical limits). SDM doesn't specify what happens if the there is no memory mapped at the valid address, but Intel CPUs treat the situation as if the bitmap was configured to trap all MSRs. KVM already does that by returning false and a correct handling doesn't need the guest-trigerrable warning that was reported by syzkaller: (The warning was originally there to catch some possible bugs in nVMX.) ------------[ cut here ]------------ WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] WARNING: CPU: 0 PID: 7832 at arch/x86/kvm/vmx.c:9709 nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 7832 Comm: syz-executor1 Not tainted 4.10.0+ #229 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:15 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:51 panic+0x1fb/0x412 kernel/panic.c:179 __warn+0x1c4/0x1e0 kernel/panic.c:540 warn_slowpath_null+0x2c/0x40 kernel/panic.c:583 nested_vmx_merge_msr_bitmap arch/x86/kvm/vmx.c:9709 [inline] nested_get_vmcs12_pages+0xfb6/0x15c0 arch/x86/kvm/vmx.c:9640 enter_vmx_non_root_mode arch/x86/kvm/vmx.c:10471 [inline] nested_vmx_run+0x6186/0xaab0 arch/x86/kvm/vmx.c:10561 handle_vmlaunch+0x1a/0x20 arch/x86/kvm/vmx.c:7312 vmx_handle_exit+0xfc0/0x3f00 arch/x86/kvm/vmx.c:8526 vcpu_enter_guest arch/x86/kvm/x86.c:6982 [inline] vcpu_run arch/x86/kvm/x86.c:7044 [inline] kvm_arch_vcpu_ioctl_run+0x1418/0x4840 arch/x86/kvm/x86.c:7205 kvm_vcpu_ioctl+0x673/0x1120 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2570 Reported-by: Dmitry Vyukov <[email protected]> Reviewed-by: Jim Mattson <[email protected]> [Jim Mattson explained the bare metal behavior: "I believe this behavior would be documented in the chipset data sheet rather than the SDM, since the chipset returns all 1s for an unclaimed read."] Signed-off-by: Radim Krčmář <[email protected]>
2017-03-09Merge branch 'pm-cpufreq-sched'Rafael J. Wysocki1-10/+9
* pm-cpufreq-sched: cpufreq: schedutil: Pass sg_policy to get_next_freq() cpufreq: schedutil: move cached_raw_freq to struct sugov_policy
2017-03-09Merge branch 'pm-cpufreq'Rafael J. Wysocki3-36/+35
* pm-cpufreq: cpufreq: intel_pstate: Do not reinit performance limits in ->setpolicy cpufreq: intel_pstate: Fix intel_pstate_verify_policy() cpufreq: intel_pstate: Fix global settings in active mode cpufreq: Add the "cpufreq.off=1" cmdline option cpufreq: intel_pstate: Avoid triggering cpu_frequency tracepoint unnecessarily cpufreq: intel_pstate: Fix intel_cpufreq_verify_policy() cpufreq: intel_pstate: Do not use performance_limits in passive mode
2017-03-09Merge tag 'irq-fixes-4.11-rc2' of ↵Thomas Gleixner2159-24786/+57596
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip/irqdomain updates for 4.11-rc2 from Marc Zyngier - irqchip/crossbar: Some type tidying up - irqchip/gicv3-its: Workaround for a Qualcomm erratum - irqdomain: Compile for for systems that don't use CONFIG_IRQ_DOMAIN Fixed up minor conflict in the crossbar driver.
Powered by cgit, Gruvboxed by Blaster4385.